checkbox - en to unknown language translation catalogue (21 entries)

note: description
en: Play back a sound on the default output and listen for it on the  default input.  This makes the most sense when the output and input  are directly connected, as with a patch cable.
target: Play back a sound on the default output and listen for it on the  default input.  This makes the most sense when the output and input are directly connected, as with a patch cable.

note: description
en: Run Unigine Santuary benchmark
target: Run Unigine Sanctuary benchmark

note: description
en: CPU utilization on an idle system.
target: CPU utilisation on an idle system.

note: description
en: Disk utilization on an idle system.
target: Disk utilisation on an idle system.

note: description
en: PURPOSE:
        This test will check that bluetooth connection works correctly
    STEPS:
        1. Enable bluetooth on any mobile device (PDA, smartphone, etc.)
        2. Click on the bluetooth icon in the menu bar
        3. Select 'Setup new device'
        4. Look for the device in the list and select it
        5. In the device write the PIN code automatically chosen by the wizard
        6. The device should pair with the computer
        7. Right-click on the bluetooth icon and select browse files
        8. Authorize the computer to browse the files in the device if needed
        9. You should be able to browse the files
    VERIFICATION:
        Did all the steps work?
target: PURPOSE:
        This test will check that bluetooth connection works correctly
    STEPS:
        1. Enable bluetooth on any mobile device (PDA, smartphone, etc.)
        2. Click on the bluetooth icon in the menu bar
        3. Select 'Setup new device'
        4. Look for the device in the list and select it
        5. In the device write the PIN code automatically chosen by the wizard
        6. The device should pair with the computer
        7. Right-click on the bluetooth icon and select browse files
        8. Authorise the computer to browse the files in the device if needed
        9. You should be able to browse the files
    VERIFICATION:
        Did all the steps work?

note: description
en: Test offlining CPUs in a multicore system.
target: Test off-lining CPUs in a multi-core system.

note: description
en: PURPOSE:
        This test will test the default display
    STEPS:
        1. Click "Test" to display a video test.
    VERIFICATION:
        Do you see color bars and static?
target: PURPOSE:
        This test will test the default display
    STEPS:
        1. Click "Test" to display a video test.
    VERIFICATION:
        Do you see colour bars and static?

note: description
en: PURPOSE:
        Take a screengrab of the current screen (logged on Unity desktop)
    STEPS:
        1. Take picture using USB webcam
    VERIFICATION:
        1. Review attachment manually later
target: PURPOSE:
        Take a screen shot of the current screen (logged on Unity desktop)
    STEPS:
        1. Take picture using USB webcam
    VERIFICATION:
        1. Review attachment manually later

note: description
en: Attaches the screenshot captured in graphics/screenshot.
target: Attaches the screen shot captured in graphics/screen shot.

note: description
en: PURPOSE:
        Take a screengrab of the current screen during fullscreen video playback
    STEPS:
        1. Start a fullscreen video playback
        2. Take picture using USB webcam after a few seconds
    VERIFICATION:
        1. Review attachment manually later
target: PURPOSE:
        Take a screen shot of the current screen during fullscreen video playback
    STEPS:
        1. Start a fullscreen video playback
        2. Take picture using USB webcam after a few seconds
    VERIFICATION:
        1. Review attachment manually later

note: description
en: Attaches the screenshot captured in graphics/screenshot_fullscreen_video.
target: Attaches the screen shot captured in graphics/screenshot_fullscreen_video.

note: description
en: Test to check that virtualization is supported and the test system has at least a minimal amount of RAM to function as an OpenStack Compute Node
target: Test to check that virtualisation is supported and the test system has at least a minimal amount of RAM to function as an OpenStack Compute Node

note: description
en: PURPOSE:
        This test will check your system's CD writing capabilities. This test requires a blank CD-R. If you do not have a blank CD-R, skip this test.
    STEPS:
        1. Enter a blank CD-R into your drive
        2. Click "Test" to begin.
        3. When the CD tray ejects the media after burning, close it (DO NOT remove the disk, it is needed for the second portion of the test). Note, you must close the drive within 10 seconds or the test will time out.
    VERIFICATION:
        This test should automatically select "Yes" if it passes, "No" if it fails.
target: PURPOSE:
        This test will check your system's CD writing capabilities. This test requires a blank CD-R. If you do not have a blank CD-R, skip this test.
    STEPS:
        1. Enter a blank CD-R into your drive
        2. Click "Test" to begin.
        3. When the CD tray ejects the media after burning, close it (DO NOT remove the disc, it is needed for the second portion of the test). Note, you must close the drive within 10 seconds or the test will time out.
    VERIFICATION:
        This test should automatically select "Yes" if it passes, "No" if it fails.

note: description
en: PURPOSE:
        This test will check your system's DVD writing capabilities. This test requires a blank DVD-R. If you do not have a blank DVD-R, skip this test.
    STEPS:
        1. Enter a blank DVD-R into your drive
        2. Click "Test" to begin.
        3. When the CD tray ejects the media after burning, close it (DO NOT remove the disk, it is needed for the second portion of the test). Note, you must close the drive within 10 seconds or the test will time out.
    VERIFICATION:
        This test should automatically select "Yes" if it passes, "No" if it fails.
target: PURPOSE:
        This test will check your system's DVD writing capabilities. This test requires a blank DVD-R. If you do not have a blank DVD-R, skip this test.
    STEPS:
        1. Enter a blank DVD-R into your drive
        2. Click "Test" to begin.
        3. When the CD tray ejects the media after burning, close it (DO NOT remove the disc, it is needed for the second portion of the test). Note, you must close the drive within 10 seconds or the test will time out.
    VERIFICATION:
        This test should automatically select "Yes" if it passes, "No" if it fails.

note: description
en: PURPOSE:
       This test will verify that the desktop clock synchronizes with the system clock.
    STEPS:
       1. Click the "Test" button and verify the clock moves ahead by 1 hour.
       Note: It may take a minute or so for the clock to refresh
       2. Right click on the clock, then click on "Time & Date Settings..."
       3. Ensure that your clock application is set to manual.
       4. Change the time 1 hour back
       5. Close the window and reboot
    VERIFICATION:
       Is your system clock displaying the correct date and time for your timezone?
target: PURPOSE:
       This test will verify that the desktop clock synchronises with the system clock.
    STEPS:
       1. Click the "Test" button and verify the clock moves ahead by 1 hour.
       Note: It may take a minute or so for the clock to refresh
       2. Right click on the clock, then click on "Time & Date Settings..."
       3. Ensure that your clock application is set to manual.
       4. Change the time 1 hour back
       5. Close the window and reboot
    VERIFICATION:
       Is your system clock displaying the correct date and time for your timezone?

note: description
en: PURPOSE:
        This test will check that the display is correct after suspend and resume
    STEPS:
        1. Check that your display does not show up visual artifacts after resuming.
    VERIFICATION:
        Does the display work normally after resuming from suspend?
target: PURPOSE:
        This test will check that the display is correct after suspend and resume
    STEPS:
        1. Check that your display does not show up visual artefacts after resuming.
    VERIFICATION:
        Does the display work normally after resuming from suspend?

note: description
en: PURPOSE:
        Take a screengrab of the current screen after suspend (logged on Unity desktop)
    STEPS:
        1. Take picture using USB webcam
    VERIFICATION:
        1. Review attachment manually later
target: PURPOSE:
        Take a screen shot of the current screen after suspend (logged on Unity desktop)
    STEPS:
        1. Take picture using USB webcam
    VERIFICATION:
        1. Review attachment manually later

note: description
en: PURPOSE:
     This test will check that the file browser can delete a file.
    STEPS:
     1. Click Test to open the File Browser.
     2. Right click on the file called Test File 1 and click on Move To Trash.
     3. Verify that Test File 1 has been removed.
     4. Close the File Browser.
    VERIFICATION:
      Is Test File 1 now gone?
target: PURPOSE:
     This test will check that the file browser can delete a file.
    STEPS:
     1. Click Test to open the File Browser.
     2. Right click on the file called Test File 1 and click on Move To Rubbish Bin.
     3. Verify that Test File 1 has been removed.
     4. Close the File Browser.
    VERIFICATION:
      Is Test File 1 now gone?

note: description
en: PURPOSE:
     This test will check that the file browser can delete a folder.
    STEPS:
     1. Click Test to open the File Browser.
     2. Right click on the folder called Test Folder and click on Move To Trash.
     3. Verify that the folder was deleted.
     4. Close the file browser.
    VERIFICATION:
     Has Test Folder been successfully deleted?
target: PURPOSE:
     This test will check that the file browser can delete a folder.
    STEPS:
     1. Click Test to open the File Browser.
     2. Right click on the folder called Test Folder and click on Move To Rubbish Bin.
     3. Verify that the folder was deleted.
     4. Close the file browser.
    VERIFICATION:
     Has Test Folder been successfully deleted?

en: Deselect All
target: Unselect All

en: Email
target: E-mail
