| 82
|
|
|
Surbhi Palande |
|
13 years ago
|
 |
|
| 81
|
|
* Merge from debian unstable (LP: #682177), remaining changes:
- debian/control:
+ Bump initramfs-tools Suggests to Depends: so system is not
potentially rendered unbootable.
+ Depend on plymouth.
- Add debian/cryptdisks-{enable,udev}.upstart.
- debian/cryptdisks.functions:
+ new function, crypttab_start_one_disk, to look for the named source
device in /etc/crypttab (by device name, UUID, or label) and start it
if configured to do so
+ wrap the call to /lib/cryptsetup/askpass with watershed, to make sure
we only ever have one of these running at a time; otherwise multiple
invocations could steal each other's input and/or write over each
other's output
+ when called by cryptdisks-enable, check that we don't already have a
corresponding cryptdisks-udev job running (probably waiting for a
passphrase); if there is, wait until it's finished before continuing.
- debian/cryptdisks{,-early}.init: Make the 'start' action of the init
script a no-op, this should be handled entirely by the upstart job;
and fix the LSB header to not declare this should be started in
runlevel 'S'
- debian/cryptsetup.postinst: Remove any symlinks from /etc/rcS.d on
upgrade.
- debian/rules:
+ Do not install start symlinks for init scripts, and
install debian/cryptdisks-{enable,udev}.upstart scripts.
+ link dynamically against libgcrypt and libgpg-error.
- Add debian/cryptsetup.apport: Apport package hook. Install in
debian/rules and create dir in debian/cryptsetup.dirs.
- debian/cryptsetup.postrm: call update-initramfs on package removal.
|
Lorenzo De Liso |
2:1.1.3-4ubuntu1 |
13 years ago
|
|
|
| 80
|
|
* Merge from Debian unstable (LP: #594365). Remaining changes:
- debian/control:
+ Bump initramfs-tools Suggests to Depends: so system is not
potentially rendered unbootable.
+ Depend on plymouth.
- Add debian/cryptdisks-{enable,udev}.upstart.
- debian/cryptdisks.functions:
+ new function, crypttab_start_one_disk, to look for the named source
device in /etc/crypttab (by device name, UUID, or label) and start it
if configured to do so
+ wrap the call to /lib/cryptsetup/askpass with watershed, to make sure
we only ever have one of these running at a time; otherwise multiple
invocations could steal each other's input and/or write over each
other's output
+ initially create the device under a temporary name and rename it only
at the end using 'dmsetup rename', to ensure that upstart/mountall
doesn't see our device before it's ready to go.
+ do_tmp should mount under /var/run/cryptsetup for changing the
permissions of the filesystem root, not directly on /tmp, since
mounting on /tmp a) is racy, b) confuses mountall something fierce.
+ when called by cryptdisks-enable, check that we don't already have a
corresponding cryptdisks-udev job running (probably waiting for a
passphrase); if there is, wait until it's finished before continuing.
- debian/cryptdisks{,-early}.init: Make the 'start' action of the init
script a no-op, this should be handled entirely by the upstart job;
and fix the LSB header to not declare this should be started in
runlevel 'S'
- debian/cryptsetup.postinst: Remove any symlinks from /etc/rcS.d on
upgrade.
- debian/rules: Do not install start symlinks for init scripts, and
install debian/cryptdisks-{enable,udev}.upstart scripts.
- Add debian/cryptsetup.apport: Apport package hook. Install in
debian/rules and create dir in debian/cryptsetup.dirs.
- debian/rules: link dynamically against libgcrypt and libgpg-error.
- debian/cryptsetup.postrm: call update-initramfs on package removal.
* Dropped changes, merged/superseded in Debian:
- Add ext4 support to passdev.
- cryptroot-hook: don't call copy_modules_dir with empty arguments when
archcrypto isn't found
- Set USPLASH=y and FRAMEBUFFER=y in the hook config to pull plymouth into
the initramfs.
- change interaction to use plymouth directly if present, and if not, to
fall back to /lib/cryptsetup/askpass as before
- cryptdisks.functions: replace 'echo -e' bashism with 'printf'.
- debian/initramfs/cryptroot-script: if plymouth is present in the
initramfs, use this directly, bypassing the cryptsetup askpass script
- debian/initramfs/cryptroot-hook: Properly anchor our regexps when
grepping /etc/crypttab so that we don't incorrectly match device names
that are substrings of one another.
- debian/initramfs/cryptroot-script: Don't leak /conf/conf.d/cryptroot
file descriptor to subprocesses.
- Fix grammar error in debian/initramfs/cryptroot-script
("setup" -> "set up")
- debian/initramfs/cryptroot-script: Fix this to work with current
initramfs-tools:
+ Source /scripts/functions after checking for prerequisites.
+ prereqs(): Do not assume we are running within initramfs, and
calculate relative path correctly.
|
Steve Langasek |
2:1.1.2-1ubuntu1 |
13 years ago
|
|
|
| 79
|
|
|
Bhavani Shankar |
2:1.1.0~rc2-1ubuntu15 |
13 years ago
|
|
|
| 78
|
|
|
James Westby |
2:1.1.0~rc2-1ubuntu14 |
13 years ago
|
|
|
| 77
|
|
|
Colin Watson |
2:1.1.0~rc2-1ubuntu13 |
14 years ago
|
|
|
| 76
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu12 |
14 years ago
|
|
|
| 75
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu11 |
14 years ago
|
|
|
| 74
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu10 |
14 years ago
|
|
|
| 73
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu9 |
14 years ago
|
|
|
| 72
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu8 |
14 years ago
|
|
|
| 71
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu7 |
14 years ago
|
|
|
| 70
|
|
|
Martin Pitt |
2:1.1.0~rc2-1ubuntu6 |
14 years ago
|
|
|
| 69
|
|
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu5 |
14 years ago
|
|
|
| 68
|
|
[ Steve Langasek ]
* debian/initramfs/cryptroot-script: if plymouth is present in the
initramfs, use this directly, bypassing the cryptsetup askpass script;
but keep support for these other frontends around on a transitional
basis.
* debian/cryptdisks.functions:
- change interaction to use plymouth directly if present, and if not, to
fall back to /lib/cryptsetup/askpass as before
- wrap the call to /lib/cryptsetup/askpass with watershed, to make sure
we only ever have one of these running at a time; otherwise multiple
invocations could steal each other's input and/or write over each
other's output
- new function, crypttab_start_one_disk, to look for the named source
device in /etc/crypttab (by device name, UUID, or label) and start it
if configured to do so
* debian/cryptdisks-enable.upstart: run the upstart job once for each block
device, using the new crypttab_start_one_disk function, triggered by udev;
this doesn't eliminate the possibility of a race with gdm when the
decrypted volume isn't a 'bootwait' mount point (since gdm kills
plymouth), but it does eliminate the race between udev and cryptsetup.
LP: #454898.
* debian/cryptdisks-enable.upstart: check that the package is installed
and exit gracefully if it's not. LP: #435814
* debian/cryptdisk.functions: initially create the device under a temporary
name and rename it only at the end using 'dmsetup rename', to ensure that
upstart/mountall doesn't see our device before it's ready to go.
LP: #475936.
[ Colin Watson ]
* Add ext4 support to passdev.
|
Steve Langasek |
2:1.1.0~rc2-1ubuntu4 |
14 years ago
|
|
|
| 67
|
|
|
Loïc Minier |
2:1.1.0~rc2-1ubuntu3 |
14 years ago
|
|
|
| 66
|
|
|
Oliver Grawert |
2:1.1.0~rc2-1ubuntu2 |
14 years ago
|
|
|
| 65
|
|
|
Martin Pitt |
2:1.1.0~rc2-1ubuntu1 |
14 years ago
|
|
|
| 64
|
|
|
Steve Langasek |
2:1.0.6+20090405.svn49-1ubuntu8 |
14 years ago
|
|
|
| 63
|
|
|
Scott James Remnant |
2:1.0.6+20090405.svn49-1ubuntu7 |
14 years ago
|
|
|
collapse all