~darxus/weston/trunk : changes

~darxus/weston/trunk » Changes from revision 5310

From Revision 5310 to 5291

Rev	Summary	Authors	Date
5310	fullscreen-shell: Ensure that fs surface is presented on all... fullscreen-shell: Ensure that fs surface is presented on all outputs When no outputs are present, and no output resource is given, a fullscreen surface won't get configured. This code ensures that surface is properly presented on all outputs that get connected after a surface has been created, but only if no output resource was previously given. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5309	libweston: fix animation crash when a view has no output ass... libweston: fix animation crash when a view has no output assigned This fixes a crash in animation related code where weston would crash in weston_view_animation_create when the view had no output assigned. This makes sure that animation gets created and released immediately, so done and reset callbacks still get called properly. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> [Pekka: put a '{' on the right line.] Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5308	configure: bump Wayland requirement to 1.11.90 configure: bump Wayland requirement to 1.11.90 Commit 4ef719c416c4e455b6b29b7c1e60df1d3fa26fe4 "libweston: Implement wl_output version 3 (release request)" depends on the Wayland commit bad9dc5186e46ab92e1680d1f0ea4a4d4f0f7211 "protocol: Add release (destructor) request to wl_output" Reported-by: Armin Krezović <krezovic.armin@gmail.com> Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Pekka Paalanen	7 years ago
5307	libweston: Implement wl_output version 3 (release request) libweston: Implement wl_output version 3 (release request) Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net> Reviewed-by: Emre Ucan <eucan@de.adit-jv.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Quentin Glidic	7 years ago
5306	gl-renderer: Make dummy surface current after all outputs ar... gl-renderer: Make dummy surface current after all outputs are gone When all outputs are gone, there are no current read/write surfaces associated with a context. This makes the previously created dummy surface current until an output gets attached to avoid any potential crashes. v2: - Remove unnecessary objects Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5305	compositor: Mark all views as dirty when a new output is ass... compositor: Mark all views as dirty when a new output is assigned When all outputs are gone and views were created before they were gone, such views would have no output object assigned and nothing would assign it later. This makes sure all views are set as dirty, so they can get an output assigned when an output gets plugged in, if they didn't have any output assigned. This change also works when a new output is added even if there already are outputs in use. A view may be partly off-screen. If the new output appears at a position where it overlaps an existing view, that view should get updated. It is enough to process only the main view_list, because views not on that list are not shown for the moment and so do not need an immediate update. Instead, they will get updated later as needed because making an off-list view to go on-list inherently requires calling weston_view_geometry_dirty(). Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> [Pekka: addes commit msg paragrapha 2 and 3.] Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>	Armin Krezović	7 years ago
5304	compositor-drm: Use non-cast functions to retrieve backend a... compositor-drm: Use non-cast functions to retrieve backend and output objects This uses container_of instead of explicit cast to retrieve backend and output objects from generic weston_backend and weston_output pointers. v2: - Remove unneeded cast - Remove unneeded line breaks Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5303	Switch to use safe_strtoint instead of strtol Switch to use safe_strtoint instead of strtol Signed-off-by: Bryce Harrington <bryce@osg.samsung.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>	Bryce Harrington	7 years ago
5302	Add safe_strtoint() helper Add safe_strtoint() helper Adds a safe strtol helper function, modeled loosely after Wayland scanner's strtouint. This encapsulates the various quirks of strtol behavior, and streamlines the interface to just handling base-10 numbers with a simple true/false error indicator and a uint32_t return by reference. Test cases are loosely derived from an earlier patch by Imran Zaman. Signed-off-by: Bryce Harrington <bryce@osg.samsung.com> Reviewed-by: Thiago Macieira <thiago.macieira@intel.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>	Bryce Harrington	7 years ago
5301	option-parser: Improve error checking for strtol call option-parser: Improve error checking for strtol call Make the error checking consistent with other strtol() calls. Note that since strtol(nptr, &endptr) sets endptr == nptr if there were no digits, this catches the case where the string was blank, so there's no need to test *value != '\0'. Signed-off-by: Bryce Harrington <bryce@osg.samsung.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>	Bryce Harrington	7 years ago
5300	xwayland: Improve error checking for strtol call xwayland: Improve error checking for strtol call This updates the error checking for the strtol() call in xwayland's create_lockfile to match other cases. C.f. cbc05378 and other recent patches. A notable difference here is that the existing error checking was verifying that exactly 10 digits were being read from the lock file, but the fact that it's 10 digits is just an implementation detail for how we're writing it. The pid could be a shorter number of digits, and would just be space-padded on the left. This change allows the file to contain any number of digits, but it can't be blank, all of the digits must be numeric, and the resulting number must be within the accepted range. Signed-off-by: Bryce Harrington <bryce@osg.samsung.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>	Bryce Harrington	7 years ago
5299	Standardize error checking for strtol calls Standardize error checking for strtol calls This tightens up the strtol() error checking in several places where it is used for parsing environment variables, and in the backlight interface that is reading numbers from files under /sys/class/backlight. All of these uses are expecting strings containing decimal numbers and nothing else, so the error checking can all be tightened up and made consistent with other strtol() calls. This follows the error checking style used in Wayland (c.f. wayland-client.c and scanner.c) and c.f. commit cbc05378. Signed-off-by: Bryce Harrington <bryce@osg.samsung.com> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>	Bryce Harrington	7 years ago
5298	compositor-x11: Use non-cast functions to retrieve backend a... compositor-x11: Use non-cast functions to retrieve backend and output objects This uses container_of instead of explicit cast to retrieve backend and output objects from generic weston_backend and weston_output pointers. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5297	compositor-wayland: Use non-cast functions to retrieve backe... compositor-wayland: Use non-cast functions to retrieve backend and output objects This uses container_of instead of explicit cast to retrieve backend and output objects from generic weston_backend and weston_output pointers. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5296	compositor-rdp: Use non-cast functions to retrieve backend a... compositor-rdp: Use non-cast functions to retrieve backend and output objects This uses container_of instead of explicit cast to retrieve backend and output objects from generic weston_backend and weston_output pointers. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5295	compositor-headless: Use non-cast functions to retrieve back... compositor-headless: Use non-cast functions to retrieve backend and output objects This uses container_of instead of explicit cast to retrieve backend and output objects from generic weston_backend and weston_output pointers. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5294	compositor-drm: Do not exit when there are no outputs left compositor-drm: Do not exit when there are no outputs left When there are no outputs left after a hotplug event, weston will terminate. This isn't desired when trying to get weston to work with zero outputs. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5293	compositor-drm: Do not return an error when no connectors ar... compositor-drm: Do not return an error when no connectors are configured Returning an error when there are no connectors results in weston terminating after that. That's not expected when trying to get weston to start with zero drm outputs. Signed-off-by: Armin Krezović <krezovic.armin@gmail.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Armin Krezović	7 years ago
5292	libweston: fix major in libweston.pc libweston: fix major in libweston.pc Renames forgotten in "libweston: use new versioning scheme". Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Quentin Glidic <sardemff7+git@sardemff7.net> Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk> Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>	Pekka Paalanen	7 years ago
5291	automake: list static libraries before the shared ones automake: list static libraries before the shared ones The linker processes those in the order that they are given. Thus as-it we can get unresolved symbols. Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>	Emil Velikov	7 years ago

Older »