~davi/+junk/randgen

# Copyright (C) 2008-2009 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301
# USA

use lib 'lib';
use lib "$ENV{RQG_HOME}/lib";
use lib 'randgen/lib';

use strict;
use Cwd;
use File::Basename;
use GenTest;
use POSIX;
use Sys::Hostname;

my ($basedir, $vardir, $tree, $test) = @ARGV;

print("==================== Starting $0 ====================\n");
# Print MTR-style output saying which test suite/mode this is for PB2 reporting.
# So far we only support running one test at a time.
print("##############################################################################\n");
print("# $test\n");
print("##############################################################################\n");

# Autoflush output buffers (needed when using POSIX::_exit())
$| = 1;

# Working dir.
chdir('randgen');
my $cwd = cwd();

# Location of grammars and other test configuration files.
# Will use env variable RQG_CONF if set.
# Default is currently "conf" while using legacy setup.
# If not absolute path, it is relative to cwd at run time, which is the randgen directory.
my $conf = $ENV{RQG_CONF};
$conf = 'conf' if not defined $conf;

# Find out active user name and mention it in the output to ease debugging.
my $username;
if (osLinux() || osSolaris()) {
    $username = $ENV{'LOGNAME'};
} else {
    $username = $ENV{'USERNAME'};
}

say("===== Information on the host system: =====\n");
say(" - Local time  : ".localtime()."\n");
say(" - Hostname    : ".hostname()."\n");
say(" - Username    : ".$username."\n");
say(" - PID         : $$\n");
say(" - Working dir : ".cwd()."\n");
say(" - PATH        : ".$ENV{PATH}."\n");
say(" - Script arguments:\n");
say("       basedir = $basedir\n");
say("       vardir  = $vardir\n");
say("       tree    = $tree\n");
say("       test    = $test\n");
say("\n");
say("===== Information on Random Query Generator version (bzr): =====\n");
system("bzr info");
system("bzr version-info");
say("\n");

mkdir($vardir);

my $command;

# setting number of trials to 1 until we have more stable runs and proper output handling.

if ($test =~ m{falcon_combinations_simple}io ) {
	$command = '
		--grammar='.$conf.'/transactions/combinations.yy
		--gendata='.$conf.'/transactions/combinations.zz
		--config='.$conf.'/engines/falcon/falcon_simple.cc
		--duration=900
		--trials=1
		--seed=time
	';
} elsif ($test =~ m{falcon_combinations_transactions}io ) {
	$command = '
		--grammar='.$conf.'/transactions/transactions-flat.yy
		--gendata='.$conf.'/transactions/transactions.zz
		--config='.$conf.'/engines/falcon/falcon_simple.cc
		--duration=900
		--trials=1
		--seed=time
	';
} elsif ($test =~ m{innodb_combinations_simple}io ) {
	$command = '
		--grammar='.$conf.'/transactions/combinations.yy
		--gendata='.$conf.'/transactions/combinations.zz
		--config='.$conf.'/engines/innodb/innodb_simple.cc
		--mysqld=--innodb
		--duration=1800
		--trials=1
		--seed=time
	';
} elsif ($test =~ m{innodb_combinations_stress}io ) {
	$command = '
		--grammar='.$conf.'/engines/engine_stress.yy
		--gendata='.$conf.'/engines/engine_stress.zz
		--config='.$conf.'/engines/innodb/innodb_simple.cc
		--mysqld=--innodb
		--duration=600
		--trials=1
		--seed=time
	';
} elsif ($test =~ m{falcon_combinations_varchar}io ) {
	$command = '
		--grammar='.$conf.'/engines/varchar.yy
		--gendata='.$conf.'/engines/varchar.zz
		--config='.$conf.'/engines/falcon/falcon_varchar.cc
		--duration=900
		--trials=1
		--seed=time
	';
} else {
	die("unknown combinations test $test");
}

# Assuming Unix for now (using tail).

$command = "perl combinations.pl --basedir=\"$basedir\" --vardir=\"$vardir\" ".$command;

### XML reporting setup START

# Pass test name to RQG, for reporting purposes
$command = $command." --testname=".$test;

# Enable XML reporting to TestTool.
# For now only on given hosts...
my %report_xml_from_hosts = (
    'loki06'   => '',
    'nanna21'  => '',
    'techra22' => '',
    'tor06-z1' => '',
    'tyr41'    => ''
);
my $hostname = hostname();
my $xmlfile;
my $delete_xmlfile = 0; # boolean indicator whether to delete local XML file.
if (exists $report_xml_from_hosts{$hostname}) {
    # We should enable XML reporting on this host...
    say("XML reporting to TestTool automatically enabled based on hostname.");
    # We need to write the XML to a file before sending to reporting framework.
    # This is done by specifying xml-output option.
    # TMPDIR should be set by Pushbuild to indicate a suitable location for temp files.
    my $tmpdir = $ENV{'TMPDIR'};
    if (length($tmpdir) > 1) {
        $xmlfile = $tmpdir.'/'.$test.'.xml';
    } else {
        # TMPDIR not set. Write report to current directory.
        # This file should be deleted after test end so that disks won't fill up.
        $delete_xmlfile = 1;
        $xmlfile = $test.'.xml';
    }
    # Enable XML reporting to TT (assuming this is not already enabled):
    $command = $command.' --xml-output='.$xmlfile.' --report-xml-tt';
    # Specify XML reporting transport type (not relying on defaults):
    # We assume SSH keys have been properly set up to enable seamless scp use.
    $command = $command.' --report-xml-tt-type=scp';
    # Specify destination for XML reports (not relying on defaults):
    $command = $command.' --report-xml-tt-dest=regin.norway.sun.com:/raid/xml_results/TestTool/xml/';
}
### XML reporting setup END

# redirect output to log file to avoid sending huge amount of output to PB2
my $log_file = $vardir.'/pb2comb_'.$test.'.out';
$command = $command." > $log_file 2>&1";
$command =~ s{[\r\n\t]}{ }sgio;

print localtime()." [$$] Executing command: $command\n";
my $command_result = system($command);
# shift result code to the right to obtain the code returned from the called script
my $command_result_shifted = ($command_result >> 8);
print localtime()." [$$] combinations.pl exited with exit status ".$command_result_shifted."\n";


# Report test result in an MTR fashion so that PB2 will see it and add to
# xref database etc.
# Format: TESTSUITE.TESTCASE 'TESTMODE' [ RESULT ]
# Example: ndb.ndb_dd_alter 'InnoDB plugin'     [ fail ]
# Not using TESTMODE for now.
my $test_suite_name = 'serverqa';
my $full_test_name = $test_suite_name.'.'.$test;
# keep test statuses more or less vertically aligned (if more than one)
while (length $full_test_name < 40)
{
	$full_test_name = $full_test_name.' ';
}

if ($command_result_shifted > 0) {
	# test failed
	say("------------------------------------------------------------------------\n");
	print($full_test_name." [ fail ]\n");
	say("----->  See below for failure details...\n");
} else {
	print($full_test_name." [ pass ]\n");
}
# Print only parts of the output if it is "too large" for PB2.
# This is hopefully just a temporary hack solution...
# Caveats: If the file is shorter than 201 lines, all the output will be sent to std out.
#          If the file is longer than 200 lines, only the first and last parts of the output
#          will be sent to std out.
#          Using 'wc', 'head' and 'tail', so probably won't work on windows (unless required gnu utils are installed)
#          Hanged proceses not especially handled.
#          etc.
my $log_lines = `wc -l < $log_file`;	# number of lines in the log file
if ($log_lines <= 200) {
	# log has 200 lines or less. Display the entire log.
	say("----->  Test log will now be displayed...\n\n");
	open LOGFILE, $log_file or warn "***Failed to open log file [$log_file]";
	print while(<LOGFILE>);
	close LOGFILE;
} elsif ($log_lines > 200) {
	# the log has more than 200 lines. Display the first and last 100 lines.
	my $lines = 100;
	say("----->  Printing first $lines and last $lines lines from test output of $log_lines lines...\n");
	say('----->  See log file '.basename($log_file)." for full output.\n\n");
	system("head -$lines $log_file");
	print("\n.\n.\n.\n.\n.\n(...)\n.\n.\n.\n.\n.\n\n"); # something to visually separate the head and the tail
	system("tail -$lines $log_file");
} else {
	# something went wrong. wc did not work?
	warn("***ERROR during log processing. wc -l did not work? (\$log_lines=$log_lines)\n");
}

# Kill remaining mysqld processes.
# Assuming only one test run going on at the same time, and that all mysqld
# processes are ours.
say("Checking for remaining mysqld processes...\n");
if (osWindows()) {
	# assumes MS Sysinternals PsTools is installed in C:\bin
	# If you need to run pslist or pskill as non-Admin user, some permission
	# adjustments may be needed. See:
	#   http://blogs.technet.com/markrussinovich/archive/2007/07/09/1449341.aspx
	if (system('C:\bin\pslist mysqld') == 0) {
		say(" ^--- Found running mysqld process(es), to be killed if possible.\n");
		system('C:\bin\pskill mysqld > '.$vardir.'/pskill_mysqld.out 2>&1');
		system('C:\bin\pskill mysqld-nt > '.$vardir.'/pskill_mysqld-nt.out 2>&1');
	} else { say("  None found.\n"); }

} else {
	# Unix/Linux.
	# Avoid "bad argument count" messages from kill by checking if process exists first.
	if (system("pgrep mysqld") == 0) {
		say(" ^--- Found running mysqld process(es), to be killed if possible.\n");
		system("pgrep mysqld | xargs kill -15"); # "soft" kill
		sleep(5);
		if (system("pgrep mysqld > /dev/null") == 0) {
			# process is still around...
			system("pgrep mysqld | xargs kill -9"); # "hard" kill
		}
	} else { say("  None found.\n"); }
}

print localtime()." [$$] $0 will exit with exit status ".$command_result_shifted."\n";
POSIX::_exit ($command_result_shifted);