1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
|
#ifndef HWDEF_KR4_TINTRAMP_H
#define HWDEF_KR4_TINTRAMP_H
/* Noctigon KR4 w/ tint ramping
* (same driver as D4Sv2-tintramp, but with the switch on a different pin)
*
* Pin / Name / Function
* 1 PA6 2nd LED PWM (linear) (PWM1B)
* 2 PA5 R: red aux LED (PWM0B)
* 3 PA4 G: green aux LED
* 4 PA3 B: blue aux LED
* 5 PA2 button LED
* 6 PA1 Opamp 2 enable (2nd LEDs)
* 7 PA0 Opamp 1 enable (main LEDs)
* 8 GND GND
* 9 VCC VCC
* 10 PC5 (none)
* 11 PC4 (none)
* 12 PC3 RESET
* 13 PC2 (none)
* 14 PC1 SCK
* 15 PC0 main LED PWM (FET) (PWM0A) (unused on some models because tint ramping)
* 16 PB3 main LED PWM (linear) (PWM1A)
* 17 PB2 MISO / e-switch (PCINT10)
* 18 PB1 MOSI / battery voltage (ADC6)
* 19 PB0 (none)
* 20 PA7 (none)
* ADC12 thermal sensor
*/
#define ATTINY 1634
#include <avr/io.h>
// move the switch to a different pin
#define SWITCH_PIN PB2 // pin 17
#define SWITCH_PCINT PCINT10 // pin 17 pin change interrupt
#define SWITCH_PCIE PCIE1 // PCIE1 is for PCINT[11:8]
#define SWITCH_PCMSK PCMSK1 // PCMSK1 is for PCINT[11:8]
#define SWITCH_PORT PINB // PINA or PINB or PINC
#define SWITCH_PUE PUEB // pullup group B
#define PCINT_vect PCINT1_vect // ISR for PCINT[11:8]
// the rest of the config is the same as D4Sv2-tintramp
#include "hwdef-Emisar_D4Sv2-tintramp.h"
#endif
|