~gandelman-a/charms/precise/cinder/set_pg_number

#!/bin/bash -e

# Common utility functions used across all OpenStack charms.

error_out() {
  juju-log "$CHARM ERROR: $@"
  exit 1
}

function service_ctl_status {
  # Return 0 if a service is running, 1 otherwise.
  local svc="$1"
  local status=$(service $svc status | cut -d/ -f1 | awk '{ print $2 }')
  case $status in
    "start") return 0 ;;
    "stop") return 1 ;;
    *) error_out "Unexpected status of service $svc: $status" ;;
  esac
}

function service_ctl {
  # control a specific service, or all (as defined by $SERVICES)
  # service restarts will only occur depending on global $CONFIG_CHANGED,
  # which should be updated in charm's set_or_update().
  local config_changed=${CONFIG_CHANGED:-True}
  if [[ $1 == "all" ]] ; then
    ctl="$SERVICES"
  else
    ctl="$1"
  fi
  action="$2"
  if [[ -z "$ctl" ]] || [[ -z "$action" ]] ; then
    error_out "ERROR service_ctl: Not enough arguments"
  fi

  for i in $ctl ; do
    case $action in
      "start")
        service_ctl_status $i || service $i start ;;
      "stop")
        service_ctl_status $i && service $i stop || return 0 ;;
      "restart")
        if [[ "$config_changed" == "True" ]] ; then
          service_ctl_status $i && service $i restart || service $i start
        fi
        ;;
    esac
    if [[ $? != 0 ]] ; then
      juju-log "$CHARM: service_ctl ERROR - Service $i failed to $action"
    fi
  done
  # all configs should have been reloaded on restart of all services, reset
  # flag if its being used.
  if [[ "$action" == "restart" ]] && [[ -n "$CONFIG_CHANGED" ]] &&
     [[ "$ctl" == "all" ]]; then
    CONFIG_CHANGED="False"
  fi
}

function configure_install_source {
  # Setup and configure installation source based on a config flag.
  local src="$1"

  # Default to installing from the main Ubuntu archive.
  [[ $src == "distro" ]] || [[ -z "$src" ]] && return 0

  . /etc/lsb-release

  # standard 'ppa:someppa/name' format.
   if [[ "${src:0:4}" == "ppa:" ]] ; then
    juju-log "$CHARM: Configuring installation from custom src ($src)"
    add-apt-repository -y "$src" || error_out "Could not configure PPA access."
    return 0
  fi

  # standard 'deb http://url/ubuntu main' entries. gpg key ids must
  # be appended to the end of url after a |, ie:
  # 'deb http://url/ubuntu main|$GPGKEYID'
  if [[ "${src:0:3}" == "deb" ]] ; then
    juju-log "$CHARM: Configuring installation from custom src URL ($src)"
    if echo "$src" | grep -q "|" ; then
      # gpg key id tagged to end of url folloed by a |
      url=$(echo $src | cut -d'|' -f1)
      key=$(echo $src | cut -d'|' -f2)
      juju-log "$CHARM: Importing repository key: $key"
      apt-key adv --keyserver keyserver.ubuntu.com --recv-keys "$key" || \
        juju-log "$CHARM WARN: Could not import key from keyserver: $key"
    else
      juju-log "$CHARM No repository key specified."
      url="$src"
    fi
    echo "$url" > /etc/apt/sources.list.d/juju_deb.list
    return 0
  fi

  # Cloud Archive
  if [[ "${src:0:6}" == "cloud:" ]] ; then

    # current os releases supported by the UCA.
    local cloud_archive_versions="folsom grizzly"

    local ca_rel=$(echo $src | cut -d: -f2)
    local u_rel=$(echo $ca_rel | cut -d- -f1)
    local os_rel=$(echo $ca_rel | cut -d- -f2 | cut -d/ -f1)

    [[ "$u_rel" != "$DISTRIB_CODENAME" ]] &&
      error_out "Cannot install from Cloud Archive pocket $src " \
                "on this Ubuntu version ($DISTRIB_CODENAME)!"

    valid_release=""
    for rel in $cloud_archive_versions ; do
      if [[ "$os_rel" == "$rel" ]] ; then
        valid_release=1
        juju-log "Installing OpenStack ($os_rel) from the Ubuntu Cloud Archive."
      fi
    done
    if [[ -z "$valid_release" ]] ; then
      error_out "OpenStack release ($os_rel) not supported by "\
                "the Ubuntu Cloud Archive."
    fi

    # CA staging repos are standard PPAs.
    if echo $ca_rel | grep -q "staging" ; then
      add-apt-repository -y ppa:ubuntu-cloud-archive/${os_rel}-staging
      return 0
    fi

    # the others are LP-external deb repos.
    case "$ca_rel" in
      "$u_rel-$os_rel"|"$u_rel-$os_rel/updates") pocket="$u_rel-updates/$os_rel" ;;
      "$u_rel-$os_rel/proposed") pocket="$u_rel-proposed/$os_rel" ;;
      "$u_rel-$os_rel"|"$os_rel/updates") pocket="$u_rel-updates/$os_rel" ;;
      "$u_rel-$os_rel/proposed") pocket="$u_rel-proposed/$os_rel" ;;
      *) error_out "Invalid Cloud Archive repo specified: $src"
    esac

    apt-get -y install ubuntu-cloud-keyring
    entry="deb http://ubuntu-cloud.archive.canonical.com/ubuntu $pocket main"
    echo "$entry" \
      >/etc/apt/sources.list.d/ubuntu-cloud-archive-$DISTRIB_CODENAME.list
    return 0
  fi

  error_out "Invalid installation source specified in config: $src"

}

get_os_codename_install_source() {
  # derive the openstack release provided by a supported installation source.
  local rel="$1"
  local codename="unknown"
  . /etc/lsb-release

  # map ubuntu releases to the openstack version shipped with it.
  if [[ "$rel" == "distro" ]] ; then
    case "$DISTRIB_CODENAME" in
      "oneiric") codename="diablo" ;;
      "precise") codename="essex" ;;
      "quantal") codename="folsom" ;;
      "raring")  codename="grizzly" ;;
    esac
  fi

  # derive version from cloud archive strings.
  if [[ "${rel:0:6}" == "cloud:" ]] ; then
    rel=$(echo $rel | cut -d: -f2)
    local u_rel=$(echo $rel | cut -d- -f1)
    local ca_rel=$(echo $rel | cut -d- -f2)
    if [[ "$u_rel" == "$DISTRIB_CODENAME" ]] ; then
      case "$ca_rel" in
        "folsom"|"folsom/updates"|"folsom/proposed"|"folsom/staging")
          codename="folsom" ;;
        "grizzly"|"grizzly/updates"|"grizzly/proposed"|"grizzly/staging")
          codename="grizzly" ;;
      esac
    fi
  fi

  # have a guess based on the deb string provided
  if [[ "${rel:0:3}" == "deb" ]] || \
     [[ "${rel:0:3}" == "ppa" ]] ; then
    CODENAMES="diablo essex folsom grizzly havana"
    for cname in $CODENAMES; do
      if echo $rel | grep -q $cname; then
        codename=$cname
      fi
    done
  fi
  echo $codename
}

get_os_codename_package() {
  local pkg_vers=$(dpkg -l | grep "$1" | awk '{ print $3 }') || echo "none"
  pkg_vers=$(echo $pkg_vers | cut -d: -f2) # epochs
  case "${pkg_vers:0:6}" in
    "2011.2") echo "diablo" ;;
    "2012.1") echo "essex" ;;
    "2012.2") echo "folsom" ;;
    "2013.1") echo "grizzly" ;;
    "2013.2") echo "havana" ;;
  esac
}

get_os_version_codename() {
  case "$1" in
    "diablo") echo "2011.2" ;;
    "essex") echo "2012.1" ;;
    "folsom") echo "2012.2" ;;
    "grizzly") echo "2013.1" ;;
    "havana") echo "2013.2" ;;
  esac
}

get_ip() {
  dpkg -l | grep -q python-dnspython || {
    apt-get -y install python-dnspython 2>&1 > /dev/null
  }
  hostname=$1
  python -c "
import dns.resolver
import socket
try:
  # Test to see if already an IPv4 address
  socket.inet_aton('$hostname')
  print '$hostname'
except socket.error:
  try:
    answers = dns.resolver.query('$hostname', 'A')
    if answers:
      print answers[0].address
  except dns.resolver.NXDOMAIN:
    pass
"
}

# Common storage routines used by cinder, nova-volume and swift-storage.
clean_storage() {
  # if configured to overwrite existing storage, we unmount the block-dev
  # if mounted and clear any previous pv signatures
  local block_dev="$1"
  juju-log "Cleaining storage '$block_dev'"
  if grep -q "^$block_dev" /proc/mounts ; then
    mp=$(grep "^$block_dev" /proc/mounts   | awk '{ print $2 }')
    juju-log "Unmounting $block_dev from $mp"
    umount "$mp" || error_out "ERROR: Could not unmount storage from $mp"
  fi
  if pvdisplay "$block_dev" >/dev/null 2>&1 ; then
    juju-log "Removing existing LVM PV signatures from $block_dev"

    # deactivate any volgroups that may be built on this dev
    vg=$(pvdisplay $block_dev | grep "VG Name" | awk '{ print $3 }')
    if [[ -n "$vg" ]] ; then
      juju-log "Deactivating existing volume group: $vg"
      vgchange -an "$vg" ||
        error_out "ERROR: Could not deactivate volgroup $vg.  Is it in use?"
    fi
    echo "yes" | pvremove -ff "$block_dev" ||
      error_out "Could not pvremove $block_dev"
  else
    juju-log "Zapping disk of all GPT and MBR structures"
    sgdisk --zap-all $block_dev ||
      error_out "Unable to zap $block_dev"
  fi
}

function get_block_device() {
  # given a string, return full path to the block device for that
  # if input is not a block device, find a loopback device
  local input="$1"

  case "$input" in
    /dev/*) [[ ! -b "$input" ]] && error_out "$input does not exist."
            echo "$input"; return 0;;
    /*) :;;
    *)  [[ ! -b "/dev/$input" ]] && error_out "/dev/$input does not exist."
        echo "/dev/$input"; return 0;;
  esac

  # this represents a file
  # support "/path/to/file|5G"
  local fpath size oifs="$IFS"
  if [ "${input#*|}" != "${input}" ]; then
    size=${input##*|}
    fpath=${input%|*}
  else
    fpath=${input}
    size=5G
  fi

  ## loop devices are not namespaced.  This is bad for containers.
  ## it means that the output of 'losetup' may have the given $fpath
  ## in it, but that may not represent this containers $fpath, but
  ## another containers.  To address that, we really need to
  ## allow some uniq container-id to be expanded within path.
  ## TODO: find a unique container-id that will be consistent for
  ##       this container throughout its lifetime and expand it
  ##       in the fpath.
  # fpath=${fpath//%{id}/$THAT_ID}

  local found=""
  # parse through 'losetup -a' output, looking for this file
  # output is expected to look like:
  #   /dev/loop0: [0807]:961814 (/tmp/my.img)
  found=$(losetup -a |
    awk 'BEGIN { found=0; }
         $3 == f { sub(/:$/,"",$1); print $1; found=found+1; }
         END { if( found == 0 || found == 1 ) { exit(0); }; exit(1); }' \
         f="($fpath)")

  if [ $? -ne 0 ]; then
    echo "multiple devices found for $fpath: $found" 1>&2
    return 1;
  fi

  [ -n "$found" -a -b "$found" ] && { echo "$found"; return 1; }

  if [ -n "$found" ]; then
    echo "confused, $found is not a block device for $fpath";
    return 1;
  fi

  # no existing device was found, create one
  mkdir -p "${fpath%/*}"
  truncate --size "$size" "$fpath" ||
    { echo "failed to create $fpath of size $size"; return 1; }

  found=$(losetup --find --show "$fpath") ||
    { echo "failed to setup loop device for $fpath" 1>&2; return 1; }

  echo "$found"
  return 0
}

HAPROXY_CFG=/etc/haproxy/haproxy.cfg
HAPROXY_DEFAULT=/etc/default/haproxy
##########################################################################
# Description: Configures HAProxy services for Openstack API's
# Parameters:
#   Space delimited list of service:port:mode combinations for which
#   haproxy service configuration should be generated for.  The function
#   assumes the name of the peer relation is 'cluster' and that every
#   service unit in the peer relation is running the same services.
#
#   Services that do not specify :mode in parameter will default to http.
#
# Example
#   configure_haproxy cinder_api:8776:8756:tcp nova_api:8774:8764:http
##########################################################################
configure_haproxy() {
  local address=`unit-get private-address`
  local name=${JUJU_UNIT_NAME////-}
  cat > $HAPROXY_CFG << EOF
global
  log 127.0.0.1 local0
  log 127.0.0.1 local1 notice
  maxconn 20000
  user haproxy
  group haproxy
  spread-checks 0

defaults
  log global
  mode http
  option httplog
  option dontlognull
  retries 3
  timeout queue 1000
  timeout connect 1000
  timeout client 30000
  timeout server 30000

listen stats :8888
  mode http
  stats enable
  stats hide-version
  stats realm Haproxy\ Statistics
  stats uri /
  stats auth admin:password

EOF
  for service in $@; do
    local service_name=$(echo $service | cut -d : -f 1)
    local haproxy_listen_port=$(echo $service | cut -d : -f 2)
    local api_listen_port=$(echo $service | cut -d : -f 3)
    local mode=$(echo $service | cut -d : -f 4)
    [[ -z "$mode" ]] && mode="http"
    juju-log "Adding haproxy configuration entry for $service "\
             "($haproxy_listen_port -> $api_listen_port)"
    cat >> $HAPROXY_CFG << EOF
listen $service_name 0.0.0.0:$haproxy_listen_port
  balance roundrobin
  mode $mode
  option ${mode}log
  server $name $address:$api_listen_port check
EOF
    local r_id=""
    local unit=""
    for r_id in `relation-ids cluster`; do
      for unit in `relation-list -r $r_id`; do
        local unit_name=${unit////-}
        local unit_address=`relation-get -r $r_id private-address $unit`
        if [ -n "$unit_address" ]; then
          echo "  server $unit_name $unit_address:$api_listen_port check" \
            >> $HAPROXY_CFG
        fi
      done
    done
  done
  echo "ENABLED=1" > $HAPROXY_DEFAULT
  service haproxy restart
}

##########################################################################
# Description: Query HA interface to determine is cluster is configured
# Returns: 0 if configured, 1 if not configured
##########################################################################
is_clustered() {
  local r_id=""
  local unit=""
  for r_id in $(relation-ids ha); do
    if [ -n "$r_id" ]; then
      for unit in $(relation-list -r $r_id); do
         clustered=$(relation-get -r $r_id clustered $unit)
         if [ -n "$clustered" ]; then
           juju-log "Unit is haclustered"
           return 0
         fi
      done
    fi
  done
  juju-log "Unit is not haclustered"
  return 1
}

##########################################################################
# Description: Return a list of all peers in cluster relations
##########################################################################
peer_units() {
  local peers=""
  local r_id=""
  for r_id in $(relation-ids cluster); do
    peers="$peers $(relation-list -r $r_id)"
  done
  echo $peers
}

##########################################################################
# Description: Determines whether the current unit is the oldest of all
#              its peers - supports partial leader election
# Returns: 0 if oldest, 1 if not
##########################################################################
oldest_peer() {
  peers=$1
  local l_unit_no=$(echo $JUJU_UNIT_NAME | cut -d / -f 2)
  for peer in $peers; do
    echo "Comparing $JUJU_UNIT_NAME with peers: $peers"
    local r_unit_no=$(echo $peer | cut -d / -f 2)
    if (($r_unit_no<$l_unit_no)); then
        juju-log "Not oldest peer; deferring"
        return 1
    fi
  done
  juju-log "Oldest peer; might take charge?"
  return 0
}

##########################################################################
# Description: Determines whether the current service units is the
#              leader within a) a cluster of its peers or b) across a
#              set of unclustered peers.
# Parameters: CRM resource to check ownership of if clustered
# Returns: 0 if leader, 1 if not
##########################################################################
eligible_leader() {
  if is_clustered; then
    if ! is_leader $1; then
      juju-log 'Deferring action to CRM leader'
      return 1
    fi
  else
    peers=$(peer_units)
    if [ -n "$peers" ] && ! oldest_peer "$peers"; then
      juju-log 'Deferring action to oldest service unit.'
      return 1
    fi
  fi
  return 0
}

##########################################################################
# Description: Query Cluster peer interface to see if peered
# Returns: 0 if peered, 1 if not peered
##########################################################################
is_peered() {
  local r_id=$(relation-ids cluster)
  if [ -n "$r_id" ]; then
    if [ -n "$(relation-list -r $r_id)" ]; then
      juju-log "Unit peered"
      return 0
    fi
  fi
  juju-log "Unit not peered"
  return 1
}

##########################################################################
# Description: Determines whether host is owner of clustered services
# Parameters: Name of CRM resource to check ownership of
# Returns: 0 if leader, 1 if not leader
##########################################################################
is_leader() {
  hostname=`hostname`
  if [ -x /usr/sbin/crm ]; then
    if crm resource show $1 | grep -q $hostname; then
      juju-log "$hostname is cluster leader."
      return 0
    fi
  fi
  juju-log "$hostname is not cluster leader."
  return 1
}

##########################################################################
# Description: Determines whether enough data has been provided in
# configuration or relation data to configure HTTPS.
# Parameters:  None
# Returns: 0 if HTTPS can be configured, 1 if not.
##########################################################################
https() {
  local r_id=""
  if [[ -n "$(config-get ssl_cert)" ]] &&
     [[ -n "$(config-get ssl_key)" ]] ; then
    return 0
  fi
  for r_id in $(relation-ids identity-service) ; do
    for unit in $(relation-list -r $r_id) ; do
      if [[ "$(relation-get -r $r_id https_keystone $unit)" == "True" ]] &&
         [[ -n "$(relation-get -r $r_id ssl_cert $unit)" ]] &&
         [[ -n "$(relation-get -r $r_id ssl_key $unit)" ]] &&
         [[ -n "$(relation-get -r $r_id ca_cert $unit)" ]] ; then
          return 0
      fi
    done
  done
  return 1
}

##########################################################################
# Description: For a given number of port mappings, configures apache2
# HTTPs local reverse proxying using certficates and keys provided in
# either configuration data (preferred) or relation data.  Assumes ports
# are not in use (calling charm should ensure that).
# Parameters:  Variable number of proxy port mappings as
# $internal:$external.
# Returns: 0 if reverse proxy(s) have been configured, 0 if not.
##########################################################################
enable_https() {
  local port_maps="$@"
  local http_restart=""
  juju-log "Enabling HTTPS for port mappings: $port_maps."

  # allow overriding of keystone provided certs with those set manually
  # in config.
  local cert=$(config-get ssl_cert)
  local key=$(config-get ssl_key)
  local ca_cert=""
  if [[ -z "$cert" ]] || [[ -z "$key" ]] ; then
    juju-log "Inspecting identity-service relations for SSL certificate."
    local r_id=""
    cert=""
    key=""
    ca_cert=""
    for r_id in $(relation-ids identity-service) ; do
      for unit in $(relation-list -r $r_id) ; do
        [[ -z "$cert" ]] && cert="$(relation-get -r $r_id ssl_cert $unit)"
        [[ -z "$key" ]] && key="$(relation-get -r $r_id ssl_key $unit)"
        [[ -z "$ca_cert" ]] && ca_cert="$(relation-get -r $r_id ca_cert $unit)"
      done
    done
    [[ -n "$cert" ]] && cert=$(echo $cert | base64 -di)
    [[ -n "$key" ]] && key=$(echo $key | base64 -di)
    [[ -n "$ca_cert" ]] && ca_cert=$(echo $ca_cert | base64 -di)
  else
    juju-log "Using SSL certificate provided in service config."
  fi

  [[ -z "$cert" ]] || [[ -z "$key" ]] &&
    juju-log "Expected but could not find SSL certificate data, not "\
             "configuring HTTPS!" && return 1

  apt-get -y install apache2
  a2enmod ssl proxy proxy_http | grep -v "To activate the new configuration" &&
    http_restart=1

  mkdir -p /etc/apache2/ssl/$CHARM
  echo "$cert" >/etc/apache2/ssl/$CHARM/cert
  echo "$key" >/etc/apache2/ssl/$CHARM/key
  if [[ -n "$ca_cert" ]] ; then
    juju-log "Installing Keystone supplied CA cert."
    echo "$ca_cert" >/usr/local/share/ca-certificates/keystone_juju_ca_cert.crt
    update-ca-certificates --fresh

    # XXX TODO: Find a better way of exporting this?
    if [[ "$CHARM" == "nova-cloud-controller" ]] ; then
      [[ -e /var/www/keystone_juju_ca_cert.crt ]] &&
        rm -rf /var/www/keystone_juju_ca_cert.crt
      ln -s  /usr/local/share/ca-certificates/keystone_juju_ca_cert.crt \
             /var/www/keystone_juju_ca_cert.crt
    fi

  fi
  for port_map in $port_maps ; do
    local ext_port=$(echo $port_map | cut -d: -f1)
    local int_port=$(echo $port_map | cut -d: -f2)
    juju-log "Creating apache2 reverse proxy vhost for $port_map."
    cat >/etc/apache2/sites-available/${CHARM}_${ext_port} <<END
Listen $ext_port
NameVirtualHost *:$ext_port
<VirtualHost *:$ext_port>
    ServerName $(unit-get private-address)
    SSLEngine on
    SSLCertificateFile /etc/apache2/ssl/$CHARM/cert
    SSLCertificateKeyFile /etc/apache2/ssl/$CHARM/key
    ProxyPass / http://localhost:$int_port/
    ProxyPassReverse / http://localhost:$int_port/
    ProxyPreserveHost on
</VirtualHost>
<Proxy *>
    Order deny,allow
    Allow from all
</Proxy>
<Location />
    Order allow,deny
    Allow from all
</Location>
END
    a2ensite ${CHARM}_${ext_port} | grep -v "To activate the new configuration" &&
      http_restart=1
  done
  if [[ -n "$http_restart" ]] ; then
    service apache2 restart
  fi
}

##########################################################################
# Description: Ensure HTTPS reverse proxying is disabled for given port
# mappings.
# Parameters:  Variable number of proxy port mappings as
# $internal:$external.
# Returns: 0 if reverse proxy is not active for all portmaps, 1 on error.
##########################################################################
disable_https() {
  local port_maps="$@"
  local http_restart=""
  juju-log "Ensuring HTTPS disabled for $port_maps."
  ( [[ ! -d /etc/apache2 ]] || [[ ! -d /etc/apache2/ssl/$CHARM ]] ) && return 0
  for port_map in $port_maps ; do
    local ext_port=$(echo $port_map | cut -d: -f1)
    local int_port=$(echo $port_map | cut -d: -f2)
    if [[ -e /etc/apache2/sites-available/${CHARM}_${ext_port} ]] ; then
      juju-log "Disabling HTTPS reverse proxy for $CHARM $port_map."
      a2dissite ${CHARM}_${ext_port} | grep -v "To activate the new configuration" &&
        http_restart=1
    fi
  done
  if [[ -n "$http_restart" ]] ; then
    service apache2 restart
  fi
}


##########################################################################
# Description: Ensures HTTPS is either enabled or disabled for given port
# mapping.
# Parameters:  Variable number of proxy port mappings as
# $internal:$external.
# Returns: 0 if HTTPS reverse proxy is in place, 1 if it is not.
##########################################################################
setup_https() {
  # configure https via apache reverse proxying either
  # using certs provided by config or keystone.
  [[ -z "$CHARM" ]] &&
    error_out "setup_https(): CHARM not set."
  if ! https ; then
    disable_https $@
  else
    enable_https $@
  fi
}

##########################################################################
# Description: Determine correct API server listening port based on
# existence of HTTPS reverse proxy and/or haproxy.
# Paremeters: The standard public port for given service.
# Returns: The correct listening port for API service.
##########################################################################
determine_api_port() {
  local public_port="$1"
  local i=0
  ( [[ -n "$(peer_units)" ]] || is_clustered >/dev/null 2>&1 ) && i=$[$i + 1]
  https >/dev/null 2>&1 && i=$[$i + 1]
  echo $[$public_port - $[$i * 10]]
}

##########################################################################
# Description: Determine correct proxy listening port based on public IP +
# existence of HTTPS reverse proxy.
# Paremeters: The standard public port for given service.
# Returns: The correct listening port for haproxy service public address.
##########################################################################
determine_haproxy_port() {
  local public_port="$1"
  local i=0
  https >/dev/null 2>&1 && i=$[$i + 1]
  echo $[$public_port - $[$i * 10]]
}

##########################################################################
# Description: Print the value for a given config option in an OpenStack
# .ini style configuration file.
# Parameters: File path, option to retrieve, optional
# section name (default=DEFAULT)
# Returns: Prints value if set, prints nothing otherwise.
##########################################################################
local_config_get() {
  # return config values set in openstack .ini config files.
  # default placeholders starting (eg, %AUTH_HOST%) treated as
  # unset values.
  local file="$1"
  local option="$2"
  local section="$3"
  [[ -z "$section" ]] && section="DEFAULT"
  python -c "
import ConfigParser
config = ConfigParser.RawConfigParser()
config.read('$file')
try:
  value = config.get('$section', '$option')
except:
  print ''
  exit(0)
if value.startswith('%'): exit(0)
print value
"
}

##########################################################################
# Description: Creates an rc file exporting environment variables to a
# script_path local to the charm's installed directory.
# Any charm scripts run outside the juju hook environment can source this
# scriptrc to obtain updated config information necessary to perform health
# checks or service changes
#
# Parameters:
#   An array of '=' delimited  ENV_VAR:value combinations to export.
#   If optional script_path key is not provided in the array, script_path
#     defaults to scripts/scriptrc
##########################################################################
function save_script_rc {
  if [ ! -n "$JUJU_UNIT_NAME" ]; then
     echo "Error: Missing JUJU_UNIT_NAME environment variable"
     exit 1
  fi
  # our default unit_path
  unit_path="$CHARM_DIR/scripts/scriptrc"
  echo $unit_path
  tmp_rc="/tmp/${JUJU_UNIT_NAME/\//-}rc"

  echo "#!/bin/bash" > $tmp_rc
  for env_var in "${@}"
  do
    if `echo $env_var | grep -q script_path`; then
       # well then we need to reset the new unit-local script path
       unit_path="$CHARM_DIR/${env_var/script_path=/}"
    else
       echo "export $env_var" >> $tmp_rc
    fi
  done
  chmod 755 $tmp_rc
  mv $tmp_rc $unit_path
}