inkscape - en to zh_TW translation catalogue (2178 entries)

en: Create and edit Scalable Vector Graphics images
zh_TW: 建立並編輯「可伸縮向量繪圖(SVG)」圖形

en: <b>Ctrl</b>: make circle or integer-ratio ellipse, snap arc/segment angle
zh_TW: <b>Ctrl</b>: 製作正圓形或等比例伸縮的橢圓形，抓取弧形或扇形的角度

en: <b>Shift</b>: draw around the starting point
zh_TW: <b>Shift</b>: 在起始點周圍繪製

en: Create ellipse
zh_TW: 建立橢圓

en: Creating new connector
zh_TW: 建立新連接器

en: Reroute connector
zh_TW: 重設連接器路徑

note: Flush pending updates
en: Create connector
zh_TW: 建立連接器

en: Finishing connector
zh_TW: 完成連接器

en: <b>Connection point</b>: click or drag to create a new connector
zh_TW: <b>連接點</b>: 點擊或拖曳它以建立新的連接器

en: <b>Connector endpoint</b>: drag to reroute or connect to new shapes
zh_TW: <b>連接器終點</b>: 拖曳它以連接或重定路線至新的形狀

en: Select <b>at least one non-connector object</b>.
zh_TW: 選擇<b>至少一個非連接器物件</b>。

en: Make connectors avoid selected objects
zh_TW: 使連接器避免所選物件

en: Make connectors ignore selected objects
zh_TW: 使連接器忽略所選物件

en: <b>Current layer is hidden</b>. Unhide it to be able to draw on it.
zh_TW: <b>目前圖層已隱藏</b>。解除它的隱藏才可以於其上繪圖。

en: <b>Current layer is locked</b>. Unlock it to be able to draw on it.
zh_TW: <b>目前圖層已鎖定</b>。解除它的鎖定才可以於其上繪圖。

en: Create guide
zh_TW: 建立參考線

en: Delete guide
zh_TW: 刪除參考線

en: Move guide
zh_TW: 移動參考線

en: No previous zoom.
zh_TW: 無上次縮放

en: No next zoom.
zh_TW: 無下次縮放

en: <small>Nothing selected.</small>
zh_TW: <small>沒有選擇任何物件。</small>

en: <small>More than one object selected.</small>
zh_TW: <small>超過一個物件被選取。</small>

en: <small>Object has <b>%d</b> tiled clones.</small>
zh_TW: <small>物件有 <b>%d</b> 個並排複本。</small>

en: <small>Object has no tiled clones.</small>
zh_TW: <small>物件沒有並排複本。</small>

en: Select <b>one object</b> whose tiled clones to unclump.
zh_TW: 選擇<b>一個物件</b>以拆解其並排的複本。

en: Unclump tiled clones
zh_TW: 解開叢聚的並排複本

en: Select <b>one object</b> whose tiled clones to remove.
zh_TW: 選擇<b>一個物件</b>以移除其並排的複本。

en: Delete tiled clones
zh_TW: 刪除並排的複本

en: Select an <b>object</b> to clone.
zh_TW: 選擇某個<b>物件</b>以產生複本。

en: If you want to clone several objects, <b>group</b> them and <b>clone the group</b>.
zh_TW: 如果您想要複製多個物件，就<b>結合</b>它們然後<b>複製該群組</b>。

en: Create tiled clones
zh_TW: 建立並排的複本

en: <small>Per row:</small>
zh_TW: <small>依照各列:</small>

en: <small>Per column:</small>
zh_TW: <small>依照各行:</small>

en: <small>Randomize:</small>
zh_TW: <small>隨機:</small>

en: _Symmetry
zh_TW: 對稱(_S)

note: TRANSLATORS: For the following 17 symmetry groups, see * http://www.bib.ulb.ac.be/coursmath/doc/17.htm (visual examples); * http://www.clarku.edu/~djoyce/wallpaper/seventeen.html (English vocabulary); or * http://membres.lycos.fr/villemingerard/Geometri/Sym1D.htm (French vocabulary).
en: Select one of the 17 symmetry groups for the tiling
zh_TW: 選擇並排的十七種對稱群組之一

note: TRANSLATORS: "translation" means "shift" / "displacement" here.
en: <b>P1</b>: simple translation
zh_TW: <b>P1</b>:簡單轉換

en: <b>P2</b>: 180&#176; rotation
zh_TW: <b>P2</b>:180&#176; 旋轉

en: <b>PM</b>: reflection
zh_TW: <b>PM</b>:反射

note: TRANSLATORS: "glide reflection" is a reflection and a translation combined. For more info, see http://mathforum.org/sum95/suzanne/symsusan.html
en: <b>PG</b>: glide reflection
zh_TW: <b>PG</b>: 滑動反射

en: <b>CM</b>: reflection + glide reflection
zh_TW: <b>CM</b>: 反射 + 滑動反射

en: <b>PMM</b>: reflection + reflection
zh_TW: <b>PMM</b>: 反射 + 反射

en: <b>PMG</b>: reflection + 180&#176; rotation
zh_TW: <b>PMG</b>: 反射 + 180&#176; 旋轉

en: <b>PGG</b>: glide reflection + 180&#176; rotation
zh_TW: <b>PGG</b>: 滑動反射 + 180&#176; 旋轉

en: <b>CMM</b>: reflection + reflection + 180&#176; rotation
zh_TW: <b>CMM</b>: 反射 + 反射 + 180&#176; 旋轉

en: <b>P4</b>: 90&#176; rotation
zh_TW: <b>P4</b>: 90&#176; 旋轉

en: <b>P4M</b>: 90&#176; rotation + 45&#176; reflection
zh_TW: <b>P4M</b>: 90&#176; 旋轉 + 45&#176; 反射

en: <b>P4G</b>: 90&#176; rotation + 90&#176; reflection
zh_TW: <b>P4G</b>: 90&#176; 旋轉 + 90&#176; 反射

en: <b>P3</b>: 120&#176; rotation
zh_TW: <b>P3</b>: 120&#176; 旋轉

en: <b>P31M</b>: reflection + 120&#176; rotation, dense
zh_TW: <b>P31M</b>: 反射 + 120&#176; 旋轉，密集

en: <b>P3M1</b>: reflection + 120&#176; rotation, sparse
zh_TW: <b>P3M1</b>: 反射 + 120&#176; 旋轉，稀疏

en: <b>P6</b>: 60&#176; rotation
zh_TW: <b>P6</b>: 60&#176; 旋轉

en: <b>P6M</b>: reflection + 60&#176; rotation
zh_TW: <b>P6M</b>: 反射 + 60&#176; 旋轉

en: S_hift
zh_TW: 位移(_H)

note: TRANSLATORS: "shift" means: the tiles will be shifted (offset) horizontally by this amount
en: <b>Shift X:</b>
zh_TW: <b>位移 X:</b>

en: Horizontal shift per row (in % of tile width)
zh_TW: 依照各列的水平位移 (以並排寬度的百分比計算)

en: Horizontal shift per column (in % of tile width)
zh_TW: 依照各行的水平位移 (以並排寬度的百分比計算)

en: Randomize the horizontal shift by this percentage
zh_TW: 隨機以此百分比計算的水平位移

note: TRANSLATORS: "shift" means: the tiles will be shifted (offset) vertically by this amount
en: <b>Shift Y:</b>
zh_TW: <b>位移 Y:</b>

en: Vertical shift per row (in % of tile height)
zh_TW: 依照各列的垂直位移 (以並排寬度的百分比計算)

en: Vertical shift per column (in % of tile height)
zh_TW: 依照各行的垂直位移 (以並排寬度的百分比計算)

en: Randomize the vertical shift by this percentage
zh_TW: 隨機以此百分比計算的垂直位移

en: <b>Exponent:</b>
zh_TW: <b>指數:</b>

en: Whether rows are spaced evenly (1), converge (<1) or diverge (>1)
zh_TW: 是否各列間隔均勻(1)﹑收斂(<1) 或發散(>1)

en: Whether columns are spaced evenly (1), converge (<1) or diverge (>1)
zh_TW: 是否各行間隔均勻(1)﹑收斂(<1) 或發散(>1)

note: TRANSLATORS: "Alternate" is a verb here
en: <small>Alternate:</small>
zh_TW: <small>變更:</small>

en: Alternate the sign of shifts for each row
zh_TW: 變更每列的平移記號

en: Alternate the sign of shifts for each column
zh_TW: 變更每行的平移記號

en: Sc_ale
zh_TW: 伸縮(_A)

en: <b>Scale X:</b>
zh_TW: <b>伸縮 X:</b>

en: Horizontal scale per row (in % of tile width)
zh_TW: 依照各列的水平伸縮 (以並排寬度的百分比計算)

en: Horizontal scale per column (in % of tile width)
zh_TW: 依照各行的水平伸縮 (以並排寬度的百分比計算)

en: Randomize the horizontal scale by this percentage
zh_TW: 隨機以此百分比計算的水平伸縮

en: <b>Scale Y:</b>
zh_TW: <b>伸縮 Y:</b>

en: Vertical scale per row (in % of tile height)
zh_TW: 依照各列的垂直伸縮 (以並排高度的百分比計算)

en: Vertical scale per column (in % of tile height)
zh_TW: 依照各行的垂直伸縮 (以並排寬度的百分比計算)

en: Randomize the vertical scale by this percentage
zh_TW: 隨機以此百分比計算的垂直伸縮

en: Alternate the sign of scales for each row
zh_TW: 變更每列的伸縮記號

en: Alternate the sign of scales for each column
zh_TW: 變更每行的伸縮記號

en: _Rotation
zh_TW: 旋轉(_R)

en: <b>Angle:</b>
zh_TW: <b>角度:</b>

en: Rotate tiles by this angle for each row
zh_TW: 以此角度旋轉每列的並排圖形

en: Rotate tiles by this angle for each column
zh_TW: 以此角度旋轉每行的並排圖形

en: Randomize the rotation angle by this percentage
zh_TW: 以此百分比隨機計算的旋轉角度

en: Alternate the rotation direction for each row
zh_TW: 變更每列的旋轉方向

en: Alternate the rotation direction for each column
zh_TW: 變更每行的旋轉方向

en: _Blur & opacity
zh_TW: 模糊 & 濁度(_B)

en: <b>Blur:</b>
zh_TW: <b>模糊：</b>

en: Blur tiles by this percentage for each row
zh_TW: 每列依此百分比模糊並排

en: Blur tiles by this percentage for each column
zh_TW: 每欄依此百分比模糊並排

en: Randomize the tile blur by this percentage
zh_TW: 依此百分比隨機模糊並排

en: Alternate the sign of blur change for each row
zh_TW: 交替每列模糊變更的符號

en: Alternate the sign of blur change for each column
zh_TW: 交替每欄模糊變更的符號

en: <b>Fade out:</b>
zh_TW: <b>暗淡:</b>

en: Decrease tile opacity by this percentage for each row
zh_TW: 以此百分比減少每列的並排圖形濁度

en: Decrease tile opacity by this percentage for each column
zh_TW: 以此百分比減少每行的並排圖形濁度

en: Randomize the tile opacity by this percentage
zh_TW: 以此百分比隨機計算並排圖形濁度

en: Alternate the sign of opacity change for each row
zh_TW: 變更每列的濁度範圍記號

en: Alternate the sign of opacity change for each column
zh_TW: 變更每行的濁度範圍記號

en: Co_lor
zh_TW: 顏色(_L)

en: Initial color:
zh_TW: 起始顏色:

en: Initial color of tiled clones
zh_TW: 並排複本的初始顏色

en: Initial color for clones (works only if the original has unset fill or stroke)
zh_TW: 複本的初始顏色(只有當原始物件未設填充或邊框時才有用)

en: <b>H:</b>
zh_TW: <b>色調:</b>

en: Change the tile hue by this percentage for each row
zh_TW: 以此百分比改變每列的並排色調

en: Change the tile hue by this percentage for each column
zh_TW: 以此百分比改變每行的並排色調

en: Randomize the tile hue by this percentage
zh_TW: 以此百分比隨機改變並排色調

en: <b>S:</b>
zh_TW: <b>飽合度:</b>

en: Change the color saturation by this percentage for each row
zh_TW: 以此百分比改變每列的顏色飽合度

en: Change the color saturation by this percentage for each column
zh_TW: 以此百分比改變每行的顏色飽合度

en: Randomize the color saturation by this percentage
zh_TW: 以此百分比隨機改變顏色飽合度

en: <b>L:</b>
zh_TW: <b>亮度:</b>

en: Change the color lightness by this percentage for each row
zh_TW: 以此百分比改變每列的顏色亮度

en: Change the color lightness by this percentage for each column
zh_TW: 以此百分比改變每行的顏色亮度

en: Randomize the color lightness by this percentage
zh_TW: 以此百分比隨機改變顏色亮度

en: Alternate the sign of color changes for each row
zh_TW: 變更每列的顏色改變記號

en: Alternate the sign of color changes for each column
zh_TW: 變更每行的顏色改變記號

en: _Trace
zh_TW: 勾描(_T)

en: Trace the drawing under the tiles
zh_TW: 依照並排之下的繪圖勾描

en: For each clone, pick a value from the drawing in that clone's location and apply it to the clone
zh_TW: 對於每個複本，都從它所在位置的繪圖中點取數值，並將其套用至複本

en: 1. Pick from the drawing:
zh_TW: 1. 從繪圖點取:

en: Color
zh_TW: 顏色

en: Pick the visible color and opacity
zh_TW: 點取可見的顏色與濁度

en: Opacity
zh_TW: 濁度

en: Pick the total accumulated opacity
zh_TW: 點取全部累積的濁度

en: R
zh_TW: 紅

en: Pick the Red component of the color
zh_TW: 點取顏色的紅色部份數值

en: G
zh_TW: 綠

en: Pick the Green component of the color
zh_TW: 點取顏色的綠色部份數值

en: B
zh_TW: 藍

en: Pick the Blue component of the color
zh_TW: 點取顏色的藍色部份數值

en: Pick the hue of the color
zh_TW: 點取色調

en: Pick the saturation of the color
zh_TW: 點取顏色飽和度

en: Pick the lightness of the color
zh_TW: 點取顏色亮度

en: 2. Tweak the picked value:
zh_TW: 2. 調整點取值:

en: Gamma-correct:
zh_TW: Gamma-校正:

en: Shift the mid-range of the picked value upwards (>0) or downwards (<0)
zh_TW: 向上平移所點取數值的中間範圍(>0)或向下(<0)

en: Randomize:
zh_TW: 隨機:

en: Randomize the picked value by this percentage
zh_TW: 以此百分比隨機計算點取數值

en: Invert:
zh_TW: 反轉

en: Invert the picked value
zh_TW: 反轉點取值

en: 3. Apply the value to the clones':
zh_TW: 3. 套用該值到複本:

en: Presence
zh_TW: 表現

en: Each clone is created with the probability determined by the picked value in that point
zh_TW: 每個複本都以該點點取的數值決定的機率所建立

en: Size
zh_TW: 大小

en: Each clone's size is determined by the picked value in that point
zh_TW: 每個複本的大小是由該點點取的數值所決定

en: Each clone is painted by the picked color (the original must have unset fill or stroke)
zh_TW: 每個複本都以點取的顏色所繪製(原始物件必須未設填充或邊框)

en: Each clone's opacity is determined by the picked value in that point
zh_TW: 每個複本的濁度是由該點點取的數值所決定

en: How many rows in the tiling
zh_TW: 並排圖形中有多少列

en: How many columns in the tiling
zh_TW: 並排圖形中有多少行

en: Width of the rectangle to be filled
zh_TW: 要填滿的矩形寬度

en: Height of the rectangle to be filled
zh_TW: 要填滿的矩形高度

en: Rows, columns:
zh_TW: 列，行:

en: Create the specified number of rows and columns
zh_TW: 建立指定數量的列與行

en: Width, height:
zh_TW: 寬度，高度:

en: Fill the specified width and height with the tiling
zh_TW: 以並排圖形來填充指定的寬度與高度

en: Use saved size and position of the tile
zh_TW: 使用並排圖形已儲存的大小和位置

en: Pretend that the size and position of the tile are the same as the last time you tiled it (if any), instead of using the current size
zh_TW: 假定並排圖形的大小與位置跟上一次您並排它(如果有的話)時相同，而非使用目前的大小

en:  <b>_Create</b>
zh_TW: <b>建立(_C)</b>

en: Create and tile the clones of the selection
zh_TW: 建立及並排所選取的複本

note: TRANSLATORS: if a group of objects are "clumped" together, then they are unevenly spread in the given amount of space - as shown in the diagrams on the left in the following screenshot: http://www.inkscape.org/screenshots/gallery/inkscape-0.42-CVS-tiles-unclump.png So unclumping is the process of sp
en:  _Unclump
zh_TW: 拆解(_U)

en: Spread out clones to reduce clumping; can be applied repeatedly
zh_TW: 伸展複本以減少聚集；可以重覆地套用

en:  Re_move
zh_TW: 移除(_M)

en: Remove existing tiled clones of the selected object (siblings only)
zh_TW: 移除所選物件的已存在並排複本(只有同源成員)

en:  R_eset
zh_TW: 重置(_E)

note: TRANSLATORS: "change" is a noun here
en: Reset all shifts, scales, rotates, opacity and color changes in the dialog to zero
zh_TW: 重置對話框中所有的平移﹑伸縮﹑旋轉﹑濁度與顏色變化為零

en: Messages
zh_TW: 訊息

note: ## Add a menu for clear()
en: _File
zh_TW: 檔案(_F)

note: TRANSLATORS: "Clear" is a verb here
en: _Clear
zh_TW: 清除(_C)

en: Capture log messages
zh_TW: 擷取日誌訊息

en: Release log messages
zh_TW: 釋放日誌訊息

en: none
zh_TW: 無

en: _Page
zh_TW: 檢視整頁(_P)

en: _Drawing
zh_TW: 檢視繪圖部份(_D)

en: _Selection
zh_TW: 檢視選取區(_S)

en: _Custom
zh_TW: 自訂(_C)

en: <big><b>Export area</b></big>
zh_TW: <big><b>匯出區域</b></big>

en: Units:
zh_TW: 單位:

note: Stroke width
en: Width:
zh_TW: 寬度:

en: Height:
zh_TW: 高度:

en: <big><b>Bitmap size</b></big>
zh_TW: <big><b>點陣圖尺寸</b></big>

en: _Width:
zh_TW: 寬度(_W):

en: pixels at
zh_TW: 像素

note: true = has mnemonic
en: <big><b>_Filename</b></big>
zh_TW: <big><b>檔案名稱(_F)</b></big>

en: _Browse...
zh_TW: 瀏覽(_B)...

en: _Export
zh_TW: 匯出(_E)

en: Export the bitmap file with these settings
zh_TW: 以這樣的設定匯出點陣圖檔

en: Export in progress
zh_TW: 進行匯出中

en: Could not export to filename %s.
zh_TW: 無法匯出至檔案名稱 %s。

en: You have to enter a filename
zh_TW: 您必須輸入檔名

en: The chosen area to be exported is invalid
zh_TW: 選取做為匯出的區域無效

en: Directory %s does not exist or is not a directory.
zh_TW: 目錄 %s 不存在或者它並不是一個目錄。

en: Select a filename for exporting
zh_TW: 選擇一個檔名以匯出

en: Change fill rule
zh_TW: 變更填充規則

en: Set fill color
zh_TW: 設定充填顏色

en: Remove fill
zh_TW: 移除填色

en: Set gradient on fill
zh_TW: 設定填充漸層

en: Set pattern on fill
zh_TW: 設定填充式樣

note: TRANSLATORS COMMENT: unset is a verb here
en: Unset fill
zh_TW: 回復填色設定

note: TRANSLATORS: "%s" is replaced with "exact" or "partial" when this string is displayed
en: <b>%d</b> object found (out of <b>%d</b>), %s match. | <b>%d</b> objects found (out of <b>%d</b>), %s match.
zh_TW[0]: 找到 <b>%d</b> 項物件 (從 <b>%d</b> 項之中)，%s 符合。

en: exact
zh_TW: 精確的

en: partial
zh_TW: 部份的

en: No objects found
zh_TW: 找不到物件

en: T_ype:
zh_TW: 型態(_Y):

en: Search in all object types
zh_TW: 在所有物件型態中搜尋

en: All types
zh_TW: 所有型態

en: Search all shapes
zh_TW: 搜尋所有形狀

en: All shapes
zh_TW: 所有形狀

en: Search rectangles
zh_TW: 搜尋矩形

en: Rectangles
zh_TW: 矩形

en: Search ellipses, arcs, circles
zh_TW: 搜尋橢圓形、弧形、圓形

en: Ellipses
zh_TW: 橢圓形

en: Search stars and polygons
zh_TW: 搜尋星形以及多邊形

en: Stars
zh_TW: 星形

en: Search spirals
zh_TW: 搜尋螺旋形

en: Spirals
zh_TW: 螺旋形

note: TRANSLATORS: polyline is a set of connected straight line segments http://www.w3.org/TR/SVG11/shapes.html#PolylineElement
en: Search paths, lines, polylines
zh_TW: 搜尋路徑、線條、折線

en: Paths
zh_TW: 路徑

en: Search text objects
zh_TW: 搜尋文字物件

en: Texts
zh_TW: 文字

en: Search groups
zh_TW: 搜尋群組

en: Groups
zh_TW: 群組

en: Search clones
zh_TW: 搜尋複本

en: Clones
zh_TW: 複本

en: Search images
zh_TW: 搜尋圖片

en: Images
zh_TW: 圖片

en: Search offset objects
zh_TW: 搜尋offset物件

en: Offsets
zh_TW: 抵消

en: _Text:
zh_TW: 文字(_T):

en: Find objects by their text content (exact or partial match)
zh_TW: 藉由文字內容來搜尋物件(完全或部份符合)

en: Find objects by the value of the id attribute (exact or partial match)
zh_TW: 藉由 id 屬性的值來搜尋物件(完全或部份符合)

en: _Style:
zh_TW: 樣式(_S):

en: Find objects by the value of the style attribute (exact or partial match)
zh_TW: 藉由樣式屬性的值來搜尋物件(完全或部份符合)

en: _Attribute:
zh_TW: 屬性(_A):

en: Find objects by the name of an attribute (exact or partial match)
zh_TW: 藉由屬性名稱來搜尋物件(完全或部份符合)

en: Search in s_election
zh_TW: 在選取區中搜尋(_E)

en: Limit search to the current selection
zh_TW: 僅搜尋所選擇的部份

en: Search in current _layer
zh_TW: 搜尋目前圖層(_L)

en: Limit search to the current layer
zh_TW: 僅搜尋目前的圖層

en: Include _hidden
zh_TW: 包含隱藏物件(_H)

en: Include hidden objects in search
zh_TW: 搜尋時包含隱藏的物件

en: Include l_ocked
zh_TW: 包含鎖定物件(_O)

en: Include locked objects in search
zh_TW: 搜尋時包含鎖定的物件

en: Clear values
zh_TW: 清除值

en: _Find
zh_TW: 搜尋(_F)

en: Select objects matching all of the fields you filled in
zh_TW: 選擇符合您所填入全部條件的物件

en: Set guide properties
zh_TW: 設定參考線屬性

en: Guideline
zh_TW: 參考線

en: %d x %d
zh_TW: %d×%d

en: Selection
zh_TW: 選取區

en: Selection only or whole document
zh_TW: 只有選取區或是整個文件

en: Refresh the icons
zh_TW: 刷新圖示

en: The id= attribute (only letters, digits, and the characters .-_: allowed)
zh_TW: 屬性 id= (只有字母﹑數字以及字元 .-_: 被允許)

note: Button for setting the object's id, label, title and description.
en: _Set
zh_TW: 設定(_S)

note: Create the label for the object label
en: _Label
zh_TW: 圖層(_L)

en: A freeform label for the object
zh_TW: 用於物件的自由格式標籤

note: Create the label for the object title
en: Title
zh_TW: 標題

note: Create the frame for the object description
en: Description
zh_TW: 描述

note: Hide
en: _Hide
zh_TW: 隱藏(_H)

en: Check to make the object invisible
zh_TW: 勾選會使得物件不可見

note: Lock TRANSLATORS: "Lock" is a verb here
en: L_ock
zh_TW: 鎖定(_O)

en: Check to make the object insensitive (not selectable by mouse)
zh_TW: 勾取以使物件不可見(無法由滑鼠選擇)

en: Lock object
zh_TW: 鎖定物件

en: Unlock object
zh_TW: 解除鎖定物件

en: Hide object
zh_TW: 隱藏物件

en: Unhide object
zh_TW: 解除隱藏物件

en: Id invalid!
zh_TW: Id 無效！

en: Id exists!
zh_TW: Id 已存在！

en: Set object ID
zh_TW: 設定物件 ID

en: Set object label
zh_TW: 設定物件標籤

en: Set object title
zh_TW: 設定物件標題

en: Set object description
zh_TW: 設定物件描述

en: Unhide layer
zh_TW: 解除隱藏圖層

en: Hide layer
zh_TW: 隱藏圖層

en: Lock layer
zh_TW: 鎖定圖層

en: Unlock layer
zh_TW: 解除鎖定圖層

en: New
zh_TW: 新增

en: Top
zh_TW: 頂層

en: Up
zh_TW: 上一層

en: Dn
zh_TW: 下一層

en: Bot
zh_TW: 底層

en: Layer name:
zh_TW: 圖層名稱:

en: Add layer
zh_TW: 加入圖層

en: Above current
zh_TW: 目前之上

en: Below current
zh_TW: 目前之下

en: As sublayer of current
zh_TW: 做為目前層的子層

en: Position:
zh_TW: 位置：

en: Rename Layer
zh_TW: 重新命名圖層

en: _Rename
zh_TW: 重新命名(_R)

en: Rename layer
zh_TW: 重新命名圖層

note: TRANSLATORS: This means "The layer has been renamed"
en: Renamed layer
zh_TW: 重新命名的圖層

en: Add Layer
zh_TW: 加入圖層

en: _Add
zh_TW: 加入(_A)

en: New layer created.
zh_TW: 新圖層已建立。

en: Target:
zh_TW: 目標:

en: Type:
zh_TW: 類型:

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/linking.html#AElementXLinkRoleAttribute Identifies the type of the related resource with an absolute URI
en: Role:
zh_TW: 作用:

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/linking.html#AElementXLinkArcRoleAttribute For situations where the nature/role alone isn't enough, this offers an additional URI defining the purpose of the link.
en: Arcrole:
zh_TW: 扇形作用:

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/linking.html#AElementXLinkTitleAttribute
en: Title:
zh_TW: 標題:

en: Show:
zh_TW: 顯示:

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/linking.html#AElementXLinkActuateAttribute
en: Actuate:
zh_TW: 促使:

en: URL:
zh_TW: 網址:

en: CC Attribution
zh_TW: 創用 CC 姓名標示

en: CC Attribution-ShareAlike
zh_TW: 創用 CC 姓名標示-相同方式分享

en: CC Attribution-NoDerivs
zh_TW: 創用 CC 姓名標示-禁止改作

en: CC Attribution-NonCommercial
zh_TW: 創用 CC 姓名標示-非商業性

en: CC Attribution-NonCommercial-ShareAlike
zh_TW: 創用 CC 姓名標示-非商業性-相同方式分享

en: CC Attribution-NonCommercial-NoDerivs
zh_TW: 創用 CC 姓名標示-非商業性-禁止改作

en: Public Domain
zh_TW: 公共領域

en: FreeArt
zh_TW: 自由插圖

en: Name by which this document is formally known.
zh_TW: 這份文件所正式使用的名稱。

en: Date
zh_TW: 日期

en: Date associated with the creation of this document (YYYY-MM-DD).
zh_TW: 與建立這份文件相關的日期 (YYYY-MM-DD)。

en: Format
zh_TW: 格式

en: The physical or digital manifestation of this document (MIME type).
zh_TW: 此文件實體或數位的證明(MIME 類型)

note: _settings->add_checkbutton(false, SP_ATTR_STITCHTILES, _("Stitch Tiles"), "stitch", "noStitch");
en: Type
zh_TW: 型態

en: Type of document (DCMI Type).
zh_TW: 文件型態(DCMI 類型)。

en: Creator
zh_TW: 建立者

en: Name of entity primarily responsible for making the content of this document.
zh_TW: 實體名稱主要用於製作此文件的內容。

en: Rights
zh_TW: 版權

en: Name of entity with rights to the Intellectual Property of this document.
zh_TW: 具有此份文件智慧財產權的實體名稱。

en: Publisher
zh_TW: 發行者

en: Name of entity responsible for making this document available.
zh_TW: 負責使此份文件可用的實體名稱。

en: Identifier
zh_TW: 識別

en: Unique URI to reference this document.
zh_TW: 參考到此文件的唯一 URI

en: Source
zh_TW: 來源

en: Unique URI to reference the source of this document.
zh_TW: 參考到此文件來源的唯一 URI

en: Relation
zh_TW: 相關性

en: Unique URI to a related document.
zh_TW: 相關文件的唯一 URI

en: Language
zh_TW: 語言

en: Two-letter language tag with optional subtags for the language of this document.  (e.g. 'en-GB')
zh_TW: 具有選擇性副標記的雙字元語言標記，表示這份文件的語言。(例如: 'en-GB')

en: Keywords
zh_TW: 關鍵字

en: The topic of this document as comma-separated key words, phrases, or classifications.
zh_TW: 這份文件的主題是以逗號所分隔的關鍵字﹑片語或分類。

note: TRANSLATORS: "Coverage": the spatial or temporal characteristics of the content. For info, see Appendix D of http://www.w3.org/TR/1998/WD-rdf-schema-19980409/
en: Coverage
zh_TW: 有效範圍

en: Extent or scope of this document.
zh_TW: 本文件的範圍或廣度。

en: A short account of the content of this document.
zh_TW: 本文件內容的簡短報告。

note: FIXME: need to handle 1 agent per line of input
en: Contributors
zh_TW: 貢獻者

en: Names of entities responsible for making contributions to the content of this document.
zh_TW: 實體名稱用於製作此文件內容的發布。

note: TRANSLATORS: this is where you put a URL to a page that defines the license
en: URI to this document's license's namespace definition.
zh_TW: URI 用來表示這份文件授權的名稱空間定義。

note: TRANSLATORS: fragment of XML representing the license of the document
en: Fragment
zh_TW: 片斷

en: XML fragment for the RDF 'License' section.
zh_TW: 用於 RDF「授權」區段的 XML 小節。

note: TRANSLATORS: "Set" is a verb here
en: Set attribute
zh_TW: 設定屬性

en: Set stroke color
zh_TW: 設定畫筆顏色

en: Remove stroke
zh_TW: 移除描邊

en: Set gradient on stroke
zh_TW: 設定畫筆漸層

en: Set pattern on stroke
zh_TW: 設定畫筆式樣

en: Unset stroke
zh_TW: 回復描邊

en: None
zh_TW: 無

en: No document selected
zh_TW: 未選取文件

en: Set markers
zh_TW: 設定標誌

en: Stroke width
zh_TW: 邊框寬度

note: Join type TRANSLATORS: The line join style specifies the shape to be used at the corners of paths. It can be "miter", "round" or "bevel".
en: Join:
zh_TW: 接合方式:

note: TRANSLATORS: Miter join: joining lines with a sharp (pointed) corner. For an example, draw a triangle with a large stroke width and modify the "Join" option (in the Fill and Stroke dialog).
en: Miter join
zh_TW: 斜角

note: TRANSLATORS: Round join: joining lines with a rounded corner. For an example, draw a triangle with a large stroke width and modify the "Join" option (in the Fill and Stroke dialog).
en: Round join
zh_TW: 圓角

note: TRANSLATORS: Bevel join: joining lines with a blunted (flattened) corner. For an example, draw a triangle with a large stroke width and modify the "Join" option (in the Fill and Stroke dialog).
en: Bevel join
zh_TW: 斜面

note: Miterlimit TRANSLATORS: Miter limit: only for "miter join", this limits the length of the sharp "spike" when the lines connect at too sharp an angle. When two line segments meet at a sharp angle, a miter join results in a spike that extends well beyond the connection point. The purpose of the miter 
en: Miter limit:
zh_TW: 斜角限制:

en: Maximum length of the miter (in units of stroke width)
zh_TW: 斜角的最大長度(以邊框寬度為單位)

note: Cap type TRANSLATORS: cap type specifies the shape for the ends of lines
en: Cap:
zh_TW: 線端:

note: TRANSLATORS: Butt cap: the line shape does not extend beyond the end point of the line; the ends of the line are square
en: Butt cap
zh_TW: 平端

note: TRANSLATORS: Round cap: the line shape extends beyond the end point of the line; the ends of the line are rounded
en: Round cap
zh_TW: 圓端

note: TRANSLATORS: Square cap: the line shape extends beyond the end point of the line; the ends of the line are square
en: Square cap
zh_TW: 方端

note: Dash
en: Dashes:
zh_TW: 線段:

note: TRANSLATORS: Path markers are an SVG feature that allows you to attach arbitrary shapes (arrowheads, bullets, faces, whatever) to the start, end, or middle nodes of a path.
en: Start Markers:
zh_TW: 起始標記:

en: Mid Markers:
zh_TW: 中間標記:

en: End Markers:
zh_TW: 結束標記:

en: Set stroke style
zh_TW: 設定畫筆樣式

en: Change color definition
zh_TW: 變更顏色定義

en: Set stroke color from swatch
zh_TW: 從樣本調色盤中選擇設定畫筆顏色

en: Set fill color from swatch
zh_TW: 從樣本調色盤中選擇設定充填顏色

en: Palettes directory (%s) is unavailable.
zh_TW: 無可用的調色板目錄(%s)。

note: TODO:  Insert widgets
en: Font
zh_TW: 字型

en: Layout
zh_TW: 版面

en: Align lines left
zh_TW: 對齊左邊

note: TRANSLATORS: `Center' here is a verb.
en: Center lines
zh_TW: 對齊中心

en: Align lines right
zh_TW: 對齊右邊

en: Horizontal text
zh_TW: 水平文字

en: Vertical text
zh_TW: 垂直文字

en: Line spacing:
zh_TW: 列距:

note: Text
en: Text
zh_TW: 文字

en: Set as default
zh_TW: 設為預設

en: Set text style
zh_TW: 設定文字樣式

en: Arrange in a grid
zh_TW: 在格線中排列

en: Rows:
zh_TW: 列數:

en: Number of rows
zh_TW: 列的數目:

en: Equal height
zh_TW: 等高

en: If not set, each row has the height of the tallest object in it
zh_TW: 如果沒有設定，每一列都具有其中最高物件的高度

note: #### Radio buttons to control vertical alignment #### #### Radio buttons to control horizontal alignment ####
en: Align:
zh_TW: 對齊:

note: #### Number of columns ####
en: Columns:
zh_TW: 行數:

en: Number of columns
zh_TW: 行的數目

en: Equal width
zh_TW: 等寬

en: If not set, each column has the width of the widest object in it
zh_TW: 如果沒有設定，每一欄都具有其中最寬物件的寬度

note: #### Radio buttons to control spacing manually or to fit selection bbox ####
en: Fit into selection box
zh_TW: 配合選取區寬度

en: Set spacing:
zh_TW: 設定間距:

en: Vertical spacing between rows (px units)
zh_TW: 各列之間的垂直間距(像素單位)

en: Horizontal spacing between columns (px units)
zh_TW: 各欄之間的水平間距(像素單位)

en: Arrange selected objects
zh_TW: 排列選擇的物件

en: <b>Click</b> to select nodes, <b>drag</b> to rearrange.
zh_TW: <b>點擊</b>以選取節點，<b>拖曳</b>以重新排列。

en: <b>Click</b> attribute to edit.
zh_TW: <b>點擊</b>屬性以編輯。

en: Attribute <b>%s</b> selected. Press <b>Ctrl+Enter</b> when done editing to commit changes.
zh_TW: 已選擇屬性 <b>%s</b>。編輯完成時按下 <b>Ctrl+Enter</b> 以提交變更。

en: Drag to reorder nodes
zh_TW: 拖曳以重新排列節點

en: New element node
zh_TW: 新的元件節點

en: New text node
zh_TW: 新文字節點

en: Duplicate node
zh_TW: 再製節點

en: Delete node
zh_TW: 刪除節點

en: Unindent node
zh_TW: 無內縮節點

en: Indent node
zh_TW: 內縮節點

en: Raise node
zh_TW: 提升節點

en: Lower node
zh_TW: 降低節點

en: Delete attribute
zh_TW: 刪除屬性

note: TRANSLATORS: "Attribute" is a noun here
en: Attribute name
zh_TW: 屬性名稱

note: TRANSLATORS: "Set" is a verb here
en: Set
zh_TW: 設定

note: TRANSLATORS: "Attribute" is a noun here
en: Attribute value
zh_TW: 屬性值

en: Drag XML subtree
zh_TW: 拖曳 XML 子樹

en: New element node...
zh_TW: 新元件節點...

en: Cancel
zh_TW: 取消

en: Create
zh_TW: 建立

en: Create new element node
zh_TW: 建立新的元件節點

en: Create new text node
zh_TW: 建立新的文字節點

en: Cannot set <b>%s</b>: Another element with value <b>%s</b> already exists!
zh_TW: 無法設定 <b>%s</b>: 另一個具有 <b>%s</b> 值的元件已經存在！

en: Change attribute
zh_TW: 變更屬性

en: Angle X:
zh_TW: 角度 X：

en: Angle Z:
zh_TW: 角度 Z：

en: Grid line _color:
zh_TW: 網格線色彩(_c)：

en: Grid line color
zh_TW: 格線顏色

en: Color of grid lines
zh_TW: 格線的顏色

en: Ma_jor grid line color:
zh_TW: 主網格線顏色(_J)：

en: Major grid line color
zh_TW: 主要格線顏色

en: Color of the major (highlighted) grid lines
zh_TW: 主要格線(高亮度顯示)的顏色

en: Grid _units:
zh_TW: 網格單位(_U)：

en: _Origin X:
zh_TW: 原點 X(_O)：

en: X coordinate of grid origin
zh_TW: 網格原點 X 坐標

en: O_rigin Y:
zh_TW: 原點 Y(_R)：

en: Y coordinate of grid origin
zh_TW: 網格原點 Y 坐標

en: Spacing _Y:
zh_TW: 間隔 _Y：

en: _Major grid line every:
zh_TW: 主網格線每(_M)：

en: lines
zh_TW: 線條

en: Spacing _X:
zh_TW: 間隔 _X：

en: Distance between vertical grid lines
zh_TW: 垂直網格線之間的距離

en: Distance between horizontal grid lines
zh_TW: 水平網格線之間的距離

en: New document %d
zh_TW: 新文件 %d

en: Memory document %d
zh_TW: 記憶文件 %d

en: Unnamed document %d
zh_TW: 未命名文件 %d

note: We hit green anchor, closing Green-Blue-Red
en: Path is closed.
zh_TW: 路徑已關閉。

note: We hit bot start and end of single curve, closing paths
en: Closing path.
zh_TW: 關閉路徑中。

en: Draw path
zh_TW: 繪製路徑

note: alpha of color under cursor, to show in the statusbar locale-sensitive printf is OK, since this goes to the UI, not into SVG
en:  alpha %.3g
zh_TW:  透明 %.3g

note: where the color is picked, to show in the statusbar
en: , averaged with radius %d
zh_TW: ，以半徑 %d 排列

en:  under cursor
zh_TW: 在游標之下

note: message, to show in the statusbar
en: <b>Release mouse</b> to set color.
zh_TW: <b>放開滑鼠鍵</b>以設定顏色。

en: <b>Click</b> to set fill, <b>Shift+click</b> to set stroke; <b>drag</b> to average color in area; with <b>Alt</b> to pick inverse color; <b>Ctrl+C</b> to copy the color under mouse to clipboard
zh_TW: <b>點擊</b>以設定填充，<b>Shift+click</b> 以設定邊框；<b>拖曳</b>以設定區域中的平均顏色；按下 <b>Alt</b> 以點取相反顏色；<b>Ctrl+C</b> 以複製滑鼠下方的顏色到剪貼簿

en: Set picked color
zh_TW: 設定揀取的顏色

en: [Unchanged]
zh_TW: [未變更]

note: Edit
en: _Undo
zh_TW: 復原(_U)

en: _Redo
zh_TW: 重做(_R)

en: Dependency:
zh_TW: 相依性：

en:   type:
zh_TW: 型態:

en:   location:
zh_TW: 位置:

en:   string:
zh_TW: 字串:

en:   description:
zh_TW: 描述:

note: This is some filler text, needs to change before relase
en: <span weight="bold" size="larger">One or more extensions failed to load</span>
    
    The failed extensions have been skipped.  Inkscape will continue to run normally but those extensions will be unavailable.  For details to troubleshoot this problem, please refer to the error log located at:
zh_TW: <span weight="bold" size="larger">無法載入一或多個擴充功能</span>
    
    失敗的擴充功能已被跳過。Inkscape 將會繼續正常執行，但是這些擴充功能將無法使用。解決此一問題的細節請參考錯誤日誌，其位於:

note: This is some filler text, needs to change before relase
en: Show dialog on startup
zh_TW: 啟動時顯示對話框

note: static int i = 0; std::cout << "Checking module[" << i++ << "]: " << name << std::endl;
en:   This is caused by an improper .inx file for this extension.  An improper .inx file could have been caused by a faulty installation of Inkscape.
zh_TW:   這是由用於這個擴充功能的某個不當 .inx 檔案所造成。一個不當的 .inx 檔案可能是由不正常的 Inkscape 安裝所造成。

en: an ID was not defined for it.
zh_TW: 沒有為它定義的識別號。

en: there was no name defined for it.
zh_TW: 沒有為它定義的名稱。

en: the XML description of it got lost.
zh_TW: 它的 XML 描述已經遺失。

en: no implementation was defined for the extension.
zh_TW: 此延伸功能並沒有定義實作。

note: std::cout << "Failed: " << *(_deps[i]) << std::endl;
en: a dependency was not met.
zh_TW: 未符合某個相依性。

en: Extension "
zh_TW: 延伸功能「

en: " failed to load because
zh_TW: 」無法載入，因為

en: Could not create extension error log file '%s'
zh_TW: 無法建立延伸功能的錯誤日誌檔案「%s」

en: Name:
zh_TW: 名稱：

en: ID:
zh_TW: ID：

en: State:
zh_TW: 狀態：

en: Loaded
zh_TW: 已載入

en: Unloaded
zh_TW: 已卸載

en: Deactivated
zh_TW: 未活化

en: Inkscape has received additional data from the script executed.  The script did not return an error, but this may indicate the results will not be as expected.
zh_TW: Inkscape 已經從執行的命令稿中接收到額外的資料。命令稿並未回傳錯誤，但是這可能指出，所得結果將會不如預期。

en: Null external module directory name.  Modules will not be loaded.
zh_TW: 空的外部模組目錄名稱。將不會載入模組。

en: Modules directory (%s) is unavailable.  External modules in that directory will not be loaded.
zh_TW: 模組目錄 (%s) 無法使用。將不會載入該目錄中的外部模組。

en: Width
zh_TW: 寬度

en: Saturation
zh_TW: 飽和度

en: Hue
zh_TW: 色調

en: Raise
zh_TW: 提升

en: Order
zh_TW: 順序

en: Inset/Outset Halo
zh_TW: 內插/外貼光暈

en: Width in px of the halo
zh_TW: 光暈的寬度(px)

en: Number of steps
zh_TW: 步驟數量

en: Number of inset/outset copies of the object to make
zh_TW: 要製作的內插/外貼物件複本數量

en: Generate from Path
zh_TW: 從路徑產生

en: Convert texts to paths
zh_TW: 把文字轉化成路徑

en: EMF Input
zh_TW: EMF 輸入

en: Enhanced Metafiles (*.emf)
zh_TW: 加強型中繼檔案 (*.emf)

en: Enhanced Metafiles
zh_TW: 加強型中繼檔案

en: WMF Input
zh_TW: WMF 輸入

en: Windows Metafiles (*.wmf)
zh_TW: Windows 中繼檔案 (*.wmf)

en: Windows Metafiles
zh_TW: Windows 中繼檔案

en: EMF Output
zh_TW: EMF 輸出

en: Enhanced Metafile (*.emf)
zh_TW: 加強型中繼檔案 (*.emf)

en: Enhanced Metafile
zh_TW: 加強型中繼檔案

en: Encapsulated Postscript Output
zh_TW: Encapsulated Postscript 輸出

en: Make bounding box around full page
zh_TW: 產生整頁的邊界

en: Embed fonts (Type 1 only)
zh_TW: 內嵌字型 (只有 Type 1)

en: Encapsulated Postscript (*.eps)
zh_TW: Encapsulated Postscript(*.eps)

en: Encapsulated Postscript File
zh_TW: Encapsulated Postscript 檔案

en: %s GDK pixbuf Input
zh_TW: %s GDK pixbuf 輸入

en: GIMP Gradients
zh_TW: GIMP 漸變

en: GIMP Gradient (*.ggr)
zh_TW: GIMP 漸變(*.ggr)

en: Gradients used in GIMP
zh_TW: GIMP 中使用的漸變

en: Grid
zh_TW: 格線

en: Line Width
zh_TW: 線條寬度

en: Horizontal Spacing
zh_TW: 水平間隔

en: Vertical Spacing
zh_TW: 垂直間隔

en: Horizontal Offset
zh_TW: 水平偏移

en: Vertical Offset
zh_TW: 垂直偏移

en: Render
zh_TW: 潤算

en: Draw a path which is a grid
zh_TW: 繪製網格路徑

en: LaTeX Print
zh_TW: LaTeX 列印

en: LaTeX Output
zh_TW: LaTex 輸出

en: LaTeX With PSTricks macros (*.tex)
zh_TW: LaTeX 附帶 PSTricks 巨集(*.tex)

en: LaTeX PSTricks File
zh_TW: LaTeX PSTricks 檔案

en: OpenDocument Drawing Output
zh_TW: 開放文件繪圖輸出

en: OpenDocument drawing (*.odg)
zh_TW: 開放文件繪圖 (*.odg)

en: OpenDocument drawing file
zh_TW: 開放文件繪圖檔案

en: Print Destination
zh_TW: 列印指定範圍

note: Print properties frame
en: Print properties
zh_TW: 列印屬性

en: Print using PDF operators
zh_TW: 使用 PDF 運算子列印

en: Use PDF vector operators. The resulting image is usually smaller in file size and can be arbitrarily scaled, but patterns will be lost.
zh_TW: 使用 PDF 向量運算子。結果的圖像檔案尺寸通常會較小而可以任意縮放，但是圖案會失去。

en: Print as bitmap
zh_TW: 列印成點陣圖

en: Print everything as bitmap. The resulting image is usually larger in file size and cannot be arbitrarily scaled without quality loss, but all objects will be rendered exactly as displayed.
zh_TW: 以點陣圖印出所有東西。產生的圖片檔尺寸常常比較大，而且無法在不喪失品質下任意伸縮，但是所有的物件潤算將會與顯示相同。

en: Preferred resolution (dots per inch) of bitmap
zh_TW: 偏好的點陣圖解析度(每英吋幾點)

en: Resolution:
zh_TW: 解析度:

note: Print destination frame
en: Print destination
zh_TW: 列印指定範圍

en: Printer name (as given by lpstat -p);
    leave empty to use the system default printer.
    Use '> filename' to print to file.
    Use '| prog arg...' to pipe to a program.
zh_TW: 印表機名稱(透過lpstat -p得到)；
    不填寫使用系統預設印表機。
    使用 「> 檔案名稱」 列印到檔案。
    使用 「| prog arg…」透過管道輸出到另一個程式。

en: PDF Print
zh_TW: PDF 列印

en: PovRay Output
zh_TW: PovRay 輸出

en: PovRay (*.pov) (export splines)
zh_TW: PovRay (*.pov) (匯出樣條曲線)

en: PovRay Raytracer File
zh_TW: PovRay Raytracer 檔案

en: Print using PostScript operators
zh_TW: 使用 PostScript 列印

en: Use PostScript vector operators. The resulting image is usually smaller in file size and can be arbitrarily scaled, but alpha transparency and patterns will be lost.
zh_TW: 使用 PostScript 向量運算器。產生的圖片檔尺寸常常比較小，而且可以任意伸縮，但是會喪失 alpha 透明度與圖樣。

en: Postscript Print
zh_TW: Postscript 列印

en: Postscript Output
zh_TW: Postscript 輸出

en: SVG Input
zh_TW: SVG 輸入

en: Scalable Vector Graphic (*.svg)
zh_TW: 可縮放向量圖形 (*.svg)

en: Inkscape native file format and W3C standard
zh_TW: Inkscape 本地檔案格式和 W3C 標準

en: SVG Output Inkscape
zh_TW: SVG 輸出 Inkscape

en: SVG format with Inkscape extensions
zh_TW: SVG 格式附帶 Inkscape 擴充

en: SVG Output
zh_TW: SVG 輸出

en: Plain SVG (*.svg)
zh_TW: 普通 SVG (*.svg)

en: Scalable Vector Graphics format as defined by the W3C
zh_TW: 由 W3C 定義之可伸縮向量圖形格式

en: SVGZ Input
zh_TW: SVGZ 輸入

en: Compressed Inkscape SVG (*.svgz)
zh_TW: 壓縮的 Inkscape SVG (*.svgz)

en: SVG file format compressed with GZip
zh_TW: SVG 檔案格式使用 GZip 壓縮

en: SVGZ Output
zh_TW: SVGZ 輸出

en: Inkscape's native file format compressed with GZip
zh_TW: Inkscape 本地檔案格式使用 GZip 壓縮

en: Compressed plain SVG (*.svgz)
zh_TW: 壓縮的普通 SVG (*.svgz)

en: Scalable Vector Graphics format compressed with GZip
zh_TW: 可伸縮向量圖形格式使用 GZip 壓縮

en: Windows 32-bit Print
zh_TW: Windows 32 位元列印

en: WPG Input
zh_TW: WPG 輸入

en: WordPerfect Graphics (*.wpg)
zh_TW: WordPerfect 圖形 (*.wpg)

en: Vector graphics format used by Corel WordPerfect
zh_TW: Corel WordPerfect 所使用的向量圖形格式

note: We can't call sp_ui_error_dialog because we may be running from the console, in which case calling sp_ui routines will cause a segfault.  See bug 1000350 - bryce sp_ui_error_dialog(_("Format autodetect failed. The file is being opened as SVG."));
en: Format autodetect failed. The file is being opened as SVG.
zh_TW: 自動偵測格式失敗。此檔案將以 SVG 格式來開啟。

en: Failed to load the requested file %s
zh_TW: 無法載入所要求的檔案 %s

en: Document not saved yet.  Cannot revert.
zh_TW: 文件尚未儲存，無法復原。

en: Changes will be lost!  Are you sure you want to reload document %s?
zh_TW: 變動將會遺失！是否確定要重新載入文件 %s？

en: Document reverted.
zh_TW: 文件已復原。

en: Document not reverted.
zh_TW: 文件尚未復原。

en: Select file to open
zh_TW: 選擇欲開啟之檔案

en: Vacuum &lt;defs&gt;
zh_TW: 淨空 &lt;defs&gt;

en: Removed <b>%i</b> unused definition in &lt;defs&gt;. | Removed <b>%i</b> unused definitions in &lt;defs&gt;.
zh_TW[0]: 已從 &lt;defs&gt; 移除 <b>%i</b> 項未使用的定義。

en: No unused definitions in &lt;defs&gt;.
zh_TW: 在 &lt;defs&gt; 沒有未使用的定義。

en: No Inkscape extension found to save document (%s).  This may have been caused by an unknown filename extension.
zh_TW: 沒有找到 Inkscape 擴充功能以儲存文件(%s)。這可能是某個未知的副檔名所導致。

en: Document not saved.
zh_TW: 文件尚未儲存。

en: File %s could not be saved.
zh_TW: 無法儲存檔案 %s。

en: Document saved.
zh_TW: 文件已儲存

en: drawing%s
zh_TW: 繪圖%s

en: drawing-%d%s
zh_TW: 繪圖-%d%s

en: Select file to save a copy to
zh_TW: 選取檔案以儲存複本到

en: Select file to save to
zh_TW: 選擇檔案以儲存到

en: No changes need to be saved.
zh_TW: 沒有任何改變需要儲存

en: Import
zh_TW: 匯入

en: Select file to import
zh_TW: 選擇欲匯入之檔案

en: Select file to export to
zh_TW: 選取要匯出的檔案

en: Image
zh_TW: 圖像

en: Stroke Paint
zh_TW: 邊框顏色

note: File
en: Default
zh_TW: 預設

en: Duplicate
zh_TW: 再製

en: Wrap
zh_TW: 折列

en: Red
zh_TW: 紅

en: Green
zh_TW: 綠

en: Blue
zh_TW: 藍

en: Lightness
zh_TW: 亮度

en: Linear gradient <b>start</b>
zh_TW: 線性漸層<b>開始</b>

note: POINT_LG_BEGIN
en: Linear gradient <b>end</b>
zh_TW: 線性漸層<b>結束</b>

en: Radial gradient <b>center</b>
zh_TW: 放射狀漸層<b>中心</b>

en: Radial gradient <b>radius</b>
zh_TW: 放射狀漸層<b>半徑</b>

en: Radial gradient <b>focus</b>
zh_TW: 放射狀漸層<b>焦點</b>

en: Add gradient stop
zh_TW: 加入漸層停止點

en: Create default gradient
zh_TW: 建立預設漸層

en: <b>Ctrl</b>: snap gradient angle
zh_TW: <b>Ctrl</b>: 抓取漸層角度

en: <b>Shift</b>: draw gradient around the starting point
zh_TW: <b>Shift</b>: 在起始點周圍繪製漸層

en: Invert gradient
zh_TW: 反轉漸層

en: <b>Gradient</b> for %d object; with <b>Ctrl</b> to snap angle | <b>Gradient</b> for %d objects; with <b>Ctrl</b> to snap angle
zh_TW[0]: %d個物件<b>漸變</b>；按住 <b>Ctrl</b> 擷取角

en: Select <b>objects</b> on which to create gradient.
zh_TW: 選擇<b>物件</b>以建立漸層。

en: Merge gradient handles
zh_TW: 合併漸層控柄

en: Move gradient handle
zh_TW: 移動漸層控柄

en: Delete gradient stop
zh_TW: 刪除漸層停止點

en:  (stroke)
zh_TW:  (邊框)

en: %s for: %s%s; drag with <b>Ctrl</b> to snap angle, with <b>Ctrl+Alt</b> to preserve angle, with <b>Ctrl+Shift</b> to scale around center
zh_TW: %s 用於: %s%s; 以 <b>Ctrl</b> 拖曳來抓取角度，以 <b>Ctrl+Alt</b> 來保留角度，以 <b>Ctrl+Shift</b> 在中心周圍伸縮

en: Radial gradient <b>center</b> and <b>focus</b>; drag with <b>Shift</b> to separate focus
zh_TW: 放射狀漸層<b>中心</b>與<b>焦點</b>；按 <b>Shift</b> 拖曳來分離焦點

en: Gradient point shared by <b>%d</b> gradient; drag with <b>Shift</b> to separate | Gradient point shared by <b>%d</b> gradients; drag with <b>Shift</b> to separate
zh_TW[0]: 漸變點由<b>%d</b>個漸變共享；按住 <b>Shift</b> 拖動分隔

en: Unit
zh_TW: 單位

note: Add the units menu.
en: Units
zh_TW: 單位

en: Point
zh_TW: 點

en: Points
zh_TW: 點

en: Pixel
zh_TW: 像素

en: Pixels
zh_TW: 像素

note: You can add new elements from this point forward
en: Percent
zh_TW: 百分比

en: Percents
zh_TW: 百分比

en: Millimeter
zh_TW: 公釐

en: Millimeters
zh_TW: 公釐

en: Centimeter
zh_TW: 公分

en: Centimeters
zh_TW: 公分

en: Meter
zh_TW: 公尺

en: Meters
zh_TW: 公尺

note: no svg_unit
en: Inch
zh_TW: 英吋

en: Inches
zh_TW: 英吋

note: Volatiles do not have default, so there are none here TRANSLATORS: for info, see http://www.w3.org/TR/REC-CSS2/syndata.html#length-units
en: Em square
zh_TW: Em 方格

en: Em squares
zh_TW: Em 方格

note: TRANSLATORS: for info, see http://www.w3.org/TR/REC-CSS2/syndata.html#length-units
en: Ex square
zh_TW: Ex 方格

en: Ex squares
zh_TW: Ex 方格

en: Untitled document
zh_TW: 未命名文件

note: Show nice dialog box
en: Inkscape encountered an internal error and will close now.
zh_TW: Inkscape 發生內部錯誤，將立即結束。

en: Automatic backups of unsaved documents were done to the following locations:
zh_TW: 已自動備份未儲存的文件於以下的位置:

en: Automatic backup of the following documents failed:
zh_TW: 自動備份以下文件時失敗:

en: Cannot create directory %s.
    %s
zh_TW: 無法建立目錄 %s。
    %s

en: %s is not a valid directory.
    %s
zh_TW: %s 不是一個有效的目錄。
    %s

en: Cannot create file %s.
    %s
zh_TW: 無法建立檔案 %s。
    %s

en: Cannot write file %s.
    %s
zh_TW: 無法寫入檔案 %s。
    %s

en: Although Inkscape will run, it will use default settings,
    and any changes made in preferences will not be saved.
zh_TW: 雖然 Inkscape 會執行，它將使用預設的設定，
    而任何在偏好設定中的改變將不會被儲存。

en: %s is not a regular file.
    %s
zh_TW: %s 不是一個正常檔案。
    %s

en: %s not a valid XML file, or
    you don't have read permissions on it.
    %s
zh_TW: %s 不是有效的 XML 檔案，或是
    您沒有權限讀取它。
    %s

en: %s is not a valid menus file.
    %s
zh_TW: %s 不是有效的選單檔案。
    %s

en: Inkscape will run with default menus.
    New menus will not be saved.
zh_TW: Inkscape 會以預設的選單執行。
    新的選單將不會被儲存。

note: sp_ui_menu_append_check_item_from_verb(m, view, _("_Menu"), _("Show or hide the menu bar"), "menu", checkitem_toggled, checkitem_update, 0);
en: Commands Bar
zh_TW: 命令列

en: Show or hide the Commands bar (under the menu)
zh_TW: 顯示或隱藏命令列(選單之下)

en: Tool Controls Bar
zh_TW: 工具控制欄

en: Show or hide the Tool Controls bar
zh_TW: 顯示或隱藏工具控制欄

en: _Toolbox
zh_TW: 工具箱(_T)

en: Show or hide the main toolbox (on the left)
zh_TW: 顯示或隱藏主要工具列(位於左側)

en: _Palette
zh_TW: 調色盤(_P)

en: Show or hide the color palette
zh_TW: 顯示或隱藏色彩調色盤

en: _Statusbar
zh_TW: 狀態列(_S)

en: Show or hide the statusbar (at the bottom of the window)
zh_TW: 顯示或隱藏狀態列(視窗底部)

en: Verb "%s" Unknown
zh_TW: 動詞「%s」不明

note: TRANSLATORS: #%s is the id of the group e.g. <g id="#g7">, not a number.
en: Enter group #%s
zh_TW: 進入群組 #%s

en: Go to parent
zh_TW: 前往上層

en: Drop color
zh_TW: 掉失顏色

en: Could not parse SVG data
zh_TW: 無法剖析 SVG 資料

en: Drop SVG
zh_TW: 掉失 SVG

en: Drop bitmap image
zh_TW: 掉失點陣圖影像

en: _Write session file:
zh_TW: 寫入執行階段檔案(_W):

en: Select a location and filename
zh_TW: 選擇位置與檔名

en: Set filename
zh_TW: 設定檔名

en: <b>%1</b> has invited you to a whiteboard session.
zh_TW: <b>%1</b> 已邀請您參加白板會議。

en: Do you wish to accept <b>%1</b>'s whiteboard session invitation?
zh_TW: 您希望接受 <b>%1</b> 的白板會議邀請嗎？

en: Accept invitation
zh_TW: 接受邀請

en: Decline invitation
zh_TW: 謝絕邀請

en: Inkboard session (%1 to %2)
zh_TW: Inkboard 執行階段 (%1 到 %2)

en: Node or handle drag canceled.
zh_TW: 已拖曳取消節點或控柄。

en: Change handle
zh_TW: 變更控柄

en: Move handle
zh_TW: 移動控柄

en: Page
zh_TW: 頁

en: Name
zh_TW: 名稱

en: Ignoring font without family that will crash Pango
zh_TW: 進行忽略將會崩潰 Pango 的無字族字型

en: Normal offset
zh_TW: 一般偏移

en: Tangential offset
zh_TW: 正切偏移

en: Pattern is vertical
zh_TW: 式樣為垂直

en: Center
zh_TW: 置中對齊

en: Nothing on the clipboard.
zh_TW: 剪貼簿中無內容。

en: Print the Inkscape version number
zh_TW: 列印 Inkscape 版本編號

en: Do not use X server (only process files from console)
zh_TW: 不要使用 X 伺服器 (只從主控臺處理檔案)

en: Try to use X server (even if $DISPLAY is not set)
zh_TW: 嘗試去使用 X 伺服器 (即使萬一 $DISPLAY 未設定時)

en: Open specified document(s) (option string may be excluded)
zh_TW: 開啟指定文件 (可能不包括選項字串)

en: FILENAME
zh_TW: 檔名

en: Print document(s) to specified output file (use '| program' for pipe)
zh_TW: 將文件列印到指定的輸出檔案 (使用「| 程式」以實現管道功能)

en: Export document to a PNG file
zh_TW: 匯出文件為 PNG 檔案

en: The resolution used for exporting SVG into bitmap (default 90)
zh_TW: 用於匯出 SVG 成為點陣圖的解析度 (預設為 90)

en: Exported area in SVG user units (default is the canvas; 0,0 is lower-left corner)
zh_TW: 以 SVG 使用者單位匯出的區域 (預設為畫布；0,0 表示左下角)

en: Exported area is the entire drawing (not canvas)
zh_TW: 整個繪圖都是匯出區域 (非畫布)

en: Exported area is the entire canvas
zh_TW: 匯出區域是整個畫布

en: Snap the bitmap export area outwards to the nearest integer values (in SVG user units)
zh_TW: 抓取點陣圖的匯出區域時，外插至最近的整數值 (依 SVG 使用者單位)

en: The width of exported bitmap in pixels (overrides export-dpi)
zh_TW: 匯出點陣圖的像素寬度 (蓋過 export-dpi 設定)

en: WIDTH
zh_TW: 寬度

en: The height of exported bitmap in pixels (overrides export-dpi)
zh_TW: 匯出點陣圖的像素高度 (蓋過 export-dpi 設定)

en: HEIGHT
zh_TW: 高度

en: The ID of the object to export
zh_TW: 要匯出的物件的 ID

note: TRANSLATORS: this means: "Only export the object whose id is given in --export-id". See "man inkscape" for details.
en: Export just the object with export-id, hide all others (only with export-id)
zh_TW: 僅匯出具有 export-id 的物件，隱藏所有其他物件 (只具有 export-id 者)

en: Use stored filename and DPI hints when exporting (only with export-id)
zh_TW: 匯出時使用已儲存的檔名與 DPI 提示 (使用已儲存名稱)

en: Background color of exported bitmap (any SVG-supported color string)
zh_TW: 匯出點陣圖的背景顏色 (任何 SVG 所支援的顏色字串)

en: COLOR
zh_TW: 顏色

en: Background opacity of exported bitmap (either 0.0 to 1.0, or 1 to 255)
zh_TW: 匯出點陣圖的背景濁度 (不是 0.0 到 1.0，就是 1 到 255)

en: VALUE
zh_TW: 值

en: Export document to plain SVG file (no sodipodi or inkscape namespaces)
zh_TW: 匯出文件到一般 SVG 檔案 (無 sodipodi 或 inkscape 名稱空間)

en: Export document to a PS file
zh_TW: 匯出文件為 PS 檔案

en: Export document to an EPS file
zh_TW: 匯出文件為 EPS 檔案

en: Export document to a PDF file
zh_TW: 匯出文件為 PDF 檔案

en: Convert text object to paths on export (EPS)
zh_TW: 轉換文字物件為匯出路徑(EPS)

en: Embed fonts on export (Type 1 only) (EPS)
zh_TW: 內嵌字型於匯出 (只有 Type 1) (EPS)

en: Export files with the bounding box set to the page size (EPS)
zh_TW: 匯出的檔案具有設為頁面尺寸的邊界外框 (EPS)

note: TRANSLATORS: "--query-id" is an Inkscape command line option; see "inkscape --help"
en: Query the X coordinate of the drawing or, if specified, of the object with --query-id
zh_TW: 查詢繪圖的 X 座標，如果已經指定，或是具有 --query-id 物件的 X 座標

note: TRANSLATORS: "--query-id" is an Inkscape command line option; see "inkscape --help"
en: Query the Y coordinate of the drawing or, if specified, of the object with --query-id
zh_TW: 查詢繪圖的 Y 座標，如果已經指定，或是具有 --query-id 物件的 Y 座標

note: TRANSLATORS: "--query-id" is an Inkscape command line option; see "inkscape --help"
en: Query the width of the drawing or, if specified, of the object with --query-id
zh_TW: 查詢繪圖的寬度，如果已經指定，或是具有 --query-id 物件的寬度

note: TRANSLATORS: "--query-id" is an Inkscape command line option; see "inkscape --help"
en: Query the height of the drawing or, if specified, of the object with --query-id
zh_TW: 查詢繪圖的高度，如果已經指定，或是具有 --query-id 物件的高度

en: The ID of the object whose dimensions are queried
zh_TW: 查詢維度的物件 ID

note: TRANSLATORS: this option makes Inkscape print the name (path) of the extension directory
en: Print out the extension directory and exit
zh_TW: 印出擴充功能目錄並離開

en: Remove unused definitions from the defs section(s) of the document
zh_TW: 從文件的 defs 區段中移除未使用的定義

en: [OPTIONS...] [FILE...]
    
    Available options:
zh_TW: [選項...] [檔案...]
    
    可用的選項:

en: _New
zh_TW: 新增(_N)

en: Open _Recent
zh_TW: 最近開啟(_R)

en: _Edit
zh_TW: 編輯(_E)

en: Paste Si_ze
zh_TW: 貼上尺寸(_Z)

en: Clo_ne
zh_TW: 複本(_N)

en: _View
zh_TW: 檢視(_V)

en: _Zoom
zh_TW: 縮放(_Z)

en: _Display mode
zh_TW: 顯示模式(_D)

en: Show/Hide
zh_TW: 顯示/隱藏

en: _Layer
zh_TW: 圖層(_L)

en: _Object
zh_TW: 物件(_O)

en: Cli_p
zh_TW: 剪裁(_P)

en: Mas_k
zh_TW: 遮罩(_K)

en: Patter_n
zh_TW: 圖案(_N)

en: _Path
zh_TW: 路徑(_P)

en: _Text
zh_TW: 文字(_T)

en: Effe_cts
zh_TW: 效果(_C)

en: Whiteboa_rd
zh_TW: 白板(_R)

en: _Help
zh_TW: 求助(_H)

en: Tutorials
zh_TW: 指導手冊

en: <b>Ctrl</b>: toggle node type, snap handle angle, move hor/vert; <b>Ctrl+Alt</b>: move along handles
zh_TW: <b>Ctrl</b>: 切換節點類型﹑抓取控柄角度﹑水平/垂直移動；<b>Ctrl+Alt</b>: 沿著控柄移動

en: <b>Shift</b>: toggle node selection, disable snapping, rotate both handles
zh_TW: <b>Shift</b>: 切換節點選擇﹑停用抓取﹑旋轉兩個控柄

en: <b>Alt</b>: lock handle length; <b>Ctrl+Alt</b>: move along handles
zh_TW: <b>Alt</b>: 鎖定控柄長度；<b>Ctrl+Alt</b>: 沿著控柄移動

en: Stamp
zh_TW: 圖章

en: Move nodes vertically
zh_TW: 垂直地移動節點

en: Move nodes horizontally
zh_TW: 水平地移動節點

en: Move nodes
zh_TW: 移動節點

en: <b>Node handle</b>: drag to shape the curve; with <b>Ctrl</b> to snap angle; with <b>Alt</b> to lock length; with <b>Shift</b> to rotate both handles
zh_TW: <b>節點控柄</b>: 以拖曳來形成曲線；以 <b>Ctrl</b> 來抓取角度；以 <b>Alt</b> 來鎖定長度；以 <b>Shift</b> 來旋轉兩個控柄

en: Align nodes
zh_TW: 對齊節點

en: Distribute nodes
zh_TW: 散佈節點

en: Add nodes
zh_TW: 加入節點

en: Add node
zh_TW: 加入節點

en: Break path
zh_TW: 中斷路徑

en: To join, you must have <b>two endnodes</b> selected.
zh_TW: 為了結合，您必需選取<b>兩個末端節點</b>。

en: Close subpath
zh_TW: 關閉子路徑

en: Join nodes
zh_TW: 聯結節點

en: Close subpath by segment
zh_TW: 依扇形關閉子路徑

en: Join nodes by segment
zh_TW: 依扇形聯結節點

en: Delete nodes
zh_TW: 刪除節點

en: Delete nodes preserving shape
zh_TW: 刪除節點時保留形狀

en: Select <b>two non-endpoint nodes</b> on a path between which to delete segments.
zh_TW: 在將要刪除的扇形之間的路徑上，選擇<b>兩個非終點節點</b>。

en: Cannot find path between nodes.
zh_TW: 找不到節點間的路徑

en: Delete segment
zh_TW: 刪除扇形

en: Change segment type
zh_TW: 變更扇形型態

en: Change node type
zh_TW: 變更節點型態

en: Retract handle
zh_TW: 取消控柄

en: Move node handle
zh_TW: 移動節點控柄

en: <b>Node handle</b>: angle %0.2f&#176;, length %s; with <b>Ctrl</b> to snap angle; with <b>Alt</b> to lock length; with <b>Shift</b> to rotate both handles
zh_TW: <b>節點控柄</b>: 角度 %0.2f&#176;﹑長度 %s；以 <b>Ctrl</b> 來抓取角度；以 <b>Alt</b> 來鎖定長度；以 <b>Shift</b> 來旋轉兩個控柄

en: Rotate nodes
zh_TW: 旋轉節點

en: Scale nodes
zh_TW: 伸縮節點

en: Flip nodes
zh_TW: 翻轉節點

en: <b>Node</b>: drag to edit the path; with <b>Ctrl</b> to snap to horizontal/vertical; with <b>Ctrl+Alt</b> to snap to handles' directions
zh_TW: <b>節點</b>: 以拖曳來編輯路徑；以 <b>Ctrl</b> 來抓取水平/垂直；以 <b>Ctrl+Alt</b> 來抓取控柄的方向

note: TRANSLATORS: "end" is an adjective here (NOT a verb)
en: end node
zh_TW: 末端節點

note: TRANSLATORS: "cusp" means "sharp" (cusp node); see also the Advanced Tutorial
en: cusp
zh_TW: 尖銳

note: TRANSLATORS: "smooth" is an adjective here
en: smooth
zh_TW: 平滑

en: symmetric
zh_TW: 對稱

note: TRANSLATORS: "end" is an adjective here (NOT a verb)
en: end node, handle retracted (drag with <b>Shift</b> to extend)
zh_TW: 終端節點，控柄已縮回(以 <b>Shift</b> 拖曳來延伸)

en: one handle retracted (drag with <b>Shift</b> to extend)
zh_TW: 一個控柄已縮回(以 <b>Shift</b> 拖曳來延伸)

en: both handles retracted (drag with <b>Shift</b> to extend)
zh_TW: 兩個控柄已縮回(以 <b>Shift</b> 拖曳來延伸)

en: <b>Drag</b> nodes or node handles; <b>Alt+drag</b> nodes to sculpt; <b>arrow</b> keys to move nodes, <b>&lt; &gt;</b> to scale, <b>[ ]</b> to rotate
zh_TW: <b>拖動</b>節點或節點控柄；<b>Alt+拖動</b>節點造型； <b>方向</b>鍵移動節點；<b>&lt; &gt;</b> 縮放，<b>[ ]</b> 旋轉

en: <b>Drag</b> the node or its handles; <b>arrow</b> keys to move the node
zh_TW: <b>拖曳</b>該節點或它的控柄；<b>方向鍵</b>用以移動節點

en: Select a single object to edit its nodes or handles.
zh_TW: 選擇單一物件以編輯它的節點或控柄。

en: <b>0</b> out of <b>%i</b> node selected. <b>Click</b>, <b>Shift+click</b>, or <b>drag around</b> nodes to select. | <b>0</b> out of <b>%i</b> nodes selected. <b>Click</b>, <b>Shift+click</b>, or <b>drag around</b> nodes to select.
zh_TW[0]: 從 <b>%i</b> 個節點中選取了 <b>0</b> 個。<b>點擊</b>﹑<b>Shift+點擊</b> 或在節點<b>四周拖曳</b>來選取。

en: Drag the handles of the object to modify it.
zh_TW: 拖曳物件的控柄來變更它。

en: <b>%i</b> of <b>%i</b> node selected; %s. %s. | <b>%i</b> of <b>%i</b> nodes selected; %s. %s.
zh_TW[0]: 從 <b>%2$i</b> 個節點中選取了 <b>%1$i</b> 個；%3$s。%4$s。

en: <b>%i</b> of <b>%i</b> node selected in <b>%i</b> of <b>%i</b> subpaths. %s. | <b>%i</b> of <b>%i</b> nodes selected in <b>%i</b> of <b>%i</b> subpaths. %s.
zh_TW[0]: <b>%i</b> / <b>%i</b> 節點已選擇在 <b>%i</b> / <b>%i</b> 子路徑中 %s。

en: <b>%i</b> of <b>%i</b> node selected. %s. | <b>%i</b> of <b>%i</b> nodes selected. %s.
zh_TW[0]: 從 <b>%2$i</b> 個節點中選取了 <b>%1$i</b> 個；%3$s。

en: Adjust the <b>horizontal rounding</b> radius; with <b>Ctrl</b> to make the vertical radius the same
zh_TW: 調整<b>水平圓角化</b>半徑；以 <b>Ctrl</b> 使得垂直半徑為相同

en: Adjust the <b>vertical rounding</b> radius; with <b>Ctrl</b> to make the horizontal radius the same
zh_TW: 調整<b>垂直圓角化</b>半徑；以 <b>Ctrl</b> 使得水平半徑為相同

en: Adjust the <b>width and height</b> of the rectangle; with <b>Ctrl</b> to lock ratio or stretch in one dimension only
zh_TW: 調整矩形<b>寬度與高度</b>；以 <b>Ctrl</b> 來鎖定比率或只在一個維度中伸展

en: Adjust ellipse <b>width</b>, with <b>Ctrl</b> to make circle
zh_TW: 調整橢圓形<b>寬度</b>，以 <b>Ctrl</b> 來調為圓形

en: Adjust ellipse <b>height</b>, with <b>Ctrl</b> to make circle
zh_TW: 調整橢圓形<b>高度</b>，以 <b>Ctrl</b> 來調為圓形

en: Position the <b>start point</b> of the arc or segment; with <b>Ctrl</b> to snap angle; drag <b>inside</b> the ellipse for arc, <b>outside</b> for segment
zh_TW: 設定弧形或扇形的<b>起點</b>位置；可藉由 <b>Ctrl</b> 鍵來抓取角度；拖曳橢圓形的<b>內部</b>可成為弧形，<b>外部</b>可成為扇形。

en: Position the <b>end point</b> of the arc or segment; with <b>Ctrl</b> to snap angle; drag <b>inside</b> the ellipse for arc, <b>outside</b> for segment
zh_TW: 設定弧形或扇形的<b>終點</b>位置；可藉由 <b>Ctrl</b> 鍵來抓取角度；拖曳橢圓形的<b>內部</b>可成為弧形，<b>外部</b>可成為扇形。

en: Adjust the <b>tip radius</b> of the star or polygon; with <b>Shift</b> to round; with <b>Alt</b> to randomize
zh_TW: 調整星形或多邊形的<b>尖端半徑</b>；以 <b>Shift</b> 來形成圓角；以 <b>Alt</b> 來隨機變化

en: Adjust the <b>base radius</b> of the star; with <b>Ctrl</b> to keep star rays radial (no skew); with <b>Shift</b> to round; with <b>Alt</b> to randomize
zh_TW: 調整星形的<b>基本半徑</b>；按住 <b>Ctrl</b> 以保持星形光芒為放射狀(無歪斜)；按住 <b>Shift</b> 使其圓滑；按住 <b>Alt</b> 使其隨機變化

en: Roll/unroll the spiral from <b>inside</b>; with <b>Ctrl</b> to snap angle; with <b>Alt</b> to converge/diverge
zh_TW: 從<b>內部</b>捲動/反捲螺旋形；以 <b>Ctrl</b> 來抓取角度；以 <b>Alt</b> 來收斂/發散

en: Roll/unroll the spiral from <b>outside</b>; with <b>Ctrl</b> to snap angle; with <b>Shift</b> to scale/rotate
zh_TW: 從<b>外部</b>捲動/反捲螺旋形；以 <b>Ctrl</b> 來抓取角度；以 <b>Shift</b> 來伸縮/旋轉

en: Adjust the <b>offset distance</b>
zh_TW: 調整<b>偏移距離</b>

note: TRANSLATORS: This refers to the pattern that's inside the object
en: <b>Move</b> the pattern fill inside the object
zh_TW: <b>移動</b>物件內部的圖樣填充

en: <b>Scale</b> the pattern fill uniformly
zh_TW: 單一型式地<b>伸縮</b>填充圖樣

en: <b>Rotate</b> the pattern fill; with <b>Ctrl</b> to snap angle
zh_TW: <b>旋轉</b>填充圖樣；藉由 <b>Ctrl</b> 來抓取角度

en: Drag to resize the <b>flowed text frame</b>
zh_TW: 拖曳以改變<b>流動文字訊框</b>的大小

en: Select <b>at least two objects</b> to combine.
zh_TW: 選擇<b>至少兩個物件</b>以進行結合。

en: At least one of the objects is <b>not a path</b>, cannot combine.
zh_TW: 至少一個物件<b>不是路徑</b>，無法結合。

en: You cannot combine objects from <b>different groups</b> or <b>layers</b>.
zh_TW: 您無法從<b>不同的群組</b>或<b>圖層</b>結合物件。

en: Combine
zh_TW: 合併

en: Select <b>path(s)</b> to break apart.
zh_TW: 選取<b>路徑</b>以分解。

en: Break apart
zh_TW: 打散

en: <b>No path(s)</b> to break apart in the selection.
zh_TW: 選取區中<b>沒有路徑</b>可以分解。

en: Select <b>object(s)</b> to convert to path.
zh_TW: 選擇<b>物件</b>以轉換成路徑。

en: Object to path
zh_TW: 物件轉為路徑

en: <b>No objects</b> to convert to path in the selection.
zh_TW: 選取區中<b>沒有物件</b>可以轉成路徑。

en: Select <b>path(s)</b> to reverse.
zh_TW: 選取<b>路徑</b>以反轉。

en: Reverse path
zh_TW: 反向路徑

en: <b>No paths</b> to reverse in the selection.
zh_TW: 選取區中<b>沒有路徑</b>可以反轉。

en: Drawing cancelled
zh_TW: 繪製取消

en: Continuing selected path
zh_TW: 繼續所選取的路徑

en: Creating new path
zh_TW: 建立新路徑

en: Appending to selected path
zh_TW: 附加於所選取的路徑

en: <b>Click</b> or <b>click and drag</b> to close and finish the path.
zh_TW: <b>點選</b>或<b>拖曳</b>以關閉與結束路徑。

en: <b>Click</b> or <b>click and drag</b> to continue the path from this point.
zh_TW: <b>點選</b>或<b>拖曳</b>以自此點起繼續路徑。

en: <b>%s</b>: angle %3.2f&#176;, distance %s; with <b>Ctrl</b> to snap angle, <b>Enter</b> to finish the path
zh_TW: <b>%s</b>: 角度 %3.2f&#176;、距離 %s；以 <b>Ctrl</b> 來抓取角度，<b>Enter</b> 來結束路徑

en: <b>Curve handle</b>: angle %3.2f&#176;, length %s; with <b>Ctrl</b> to snap angle
zh_TW: <b>曲線控柄</b>: 角度 %3.2f&#176;、長度 %s; 以 <b>Ctrl</b> 來抓取角度

en: <b>%s</b>: angle %3.2f&#176;, length %s; with <b>Ctrl</b> to snap angle, with <b>Shift</b> to move this handle only
zh_TW: <b>%s</b>: 角度 %3.2f&#176;, 長度 %s; 以 <b>Ctrl</b> 來抓取角度， 以 <b>Shift</b> 來只移動這個控柄

en: Drawing finished
zh_TW: 繪製完成

en: <b>Release</b> here to close and finish the path.
zh_TW: 在這裡<b>釋放</b>以關閉並結束此路徑。

en: Drawing a freehand path
zh_TW: 繪製徒手路徑

en: <b>Drag</b> to continue the path from this point.
zh_TW: <b>拖曳</b>以從此點繼續路徑。

note: Write curves to object
en: Finishing freehand
zh_TW: 完成徒手畫

en: %s is not a valid preferences file.
    %s
zh_TW: %s 不是有效的偏好設定檔案。
    %s

en: Inkscape will run with default settings.
    New settings will not be saved.
zh_TW: Inkscape 會以預設的設定執行。
    新的設定將不會被儲存。

en: <b>Ctrl</b>: make square or integer-ratio rect, lock a rounded corner circular
zh_TW: <b>Ctrl</b>: 製作正方形或整數比例伸縮的矩形，鎖定圓角

en: <b>Rectangle</b>: %s &#215; %s; with <b>Ctrl</b> to make square or integer-ratio rectangle; with <b>Shift</b> to draw around the starting point
zh_TW: <b>矩形</b>: %s &#215; %s; 以 <b>Ctrl</b> 製作正方形或整數比例伸縮的矩形；以 <b>Shift</b> 在起點四周繪製

en: Create rectangle
zh_TW: 建立矩形

en: Move canceled.
zh_TW: 取消移動。

en: Selection canceled.
zh_TW: 取消選取。

en: Selected object is not a group. Cannot enter.
zh_TW: 選擇的物件不是一個群組。不能進入。

en: Delete text
zh_TW: 刪除文字

en: <b>Nothing</b> was deleted.
zh_TW: <b>沒有</b>物件被選取。

en: Delete
zh_TW: 刪除

en: Select <b>object(s)</b> to duplicate.
zh_TW: 選擇<b>物件</b>以再製。

en: Delete all
zh_TW: 刪除全部

en: Group
zh_TW: 群組

en: Select a <b>group</b> to ungroup.
zh_TW: 選擇一個<b>群組</b>以拆解。

en: <b>No groups</b> to ungroup in the selection.
zh_TW: 選取區中<b>沒有群組</b>可以拆解。

en: Ungroup
zh_TW: 取消分組

en: Select <b>object(s)</b> to raise.
zh_TW: 選擇<b>物件</b>以提升。

en: You cannot raise/lower objects from <b>different groups</b> or <b>layers</b>.
zh_TW: 您無法從<b>不同的群組</b>或<b>圖層</b>中提升/降低物件。

en: Select <b>object(s)</b> to raise to top.
zh_TW: 選擇<b>物件</b>以提升至頂層。

en: Raise to top
zh_TW: 提到最上層

en: Select <b>object(s)</b> to lower.
zh_TW: 選擇<b>物件</b>以降低。

en: Lower
zh_TW: 降低

en: Select <b>object(s)</b> to lower to bottom.
zh_TW: 選擇<b>物件</b>以降低至底層。

en: Lower to bottom
zh_TW: 降到最下層

en: Nothing to undo.
zh_TW: 無可進行回復。

en: Nothing to redo.
zh_TW: 無可進行重做。

en: Nothing was copied.
zh_TW: 無物被複製。

en: Paste
zh_TW: 貼上

en: Select <b>object(s)</b> to paste style to.
zh_TW: 選擇<b>物件</b>以貼上樣式。

en: Paste style
zh_TW: 貼上樣式

en: Select <b>object(s)</b> to paste size to.
zh_TW: 選擇<b>物件</b>以貼上尺寸。

en: Paste size
zh_TW: 貼上大小

en: Paste size separately
zh_TW: 分隔地貼上大小

en: Select <b>object(s)</b> to move to the layer above.
zh_TW: 選擇<b>物件</b>以移動至上層圖層。

en: Raise to next layer
zh_TW: 提升到下一圖層

en: No more layers above.
zh_TW: 無上層圖層。

en: Select <b>object(s)</b> to move to the layer below.
zh_TW: 選擇<b>物件</b>以移動至下層圖層。

en: Lower to previous layer
zh_TW: 降低到前一圖層

en: No more layers below.
zh_TW: 無下層圖層。

en: Remove transform
zh_TW: 移除變換

en: Rotate 90&#176; CW
zh_TW: 旋轉 90&#176; 順時鐘

en: Rotate 90&#176; CCW
zh_TW: 旋轉 90&#176; 逆時鐘

en: Rotate
zh_TW: 旋轉

en: Rotate by pixels
zh_TW: 依像素旋轉

en: Scale
zh_TW: 伸縮

en: Scale by whole factor
zh_TW: 依整個因素伸縮

en: Move vertically
zh_TW: 垂直地移動

en: Move horizontally
zh_TW: 水平地移動

en: Move
zh_TW: 移動

en: Move vertically by pixels
zh_TW: 以像素為單位垂直移動

en: Move horizontally by pixels
zh_TW: 以像素為單位水平移動

en: Select a <b>clone</b> to unlink.
zh_TW: 選擇<b>複本</b>以解除連結。

en: <b>No clones to unlink</b> in the selection.
zh_TW: 選取區中<b>無複本以解除連結</b>。

en: Unlink clone
zh_TW: 取消複本連結

en: Select a <b>clone</b> to go to its original. Select a <b>linked offset</b> to go to its source. Select a <b>text on path</b> to go to the path. Select a <b>flowed text</b> to go to its frame.
zh_TW: 選擇一個<b>複本</b>以前往它的原件。選擇一個<b>連結偏移</b>以前往它的來源。選擇一段<b>路徑上的文字</b>以前往該路徑。選擇一段<b>流動的文字</b>以前往它的訊框。

en: <b>Cannot find</b> the object to select (orphaned clone, offset, textpath, flowed text?)
zh_TW: <b>無法找到</b>該物件以選擇 (無人照管的複本﹑偏移﹑文字路徑﹑流動文字？)

en: The object you're trying to select is <b>not visible</b> (it is in &lt;defs&gt;)
zh_TW: 您正嘗試選擇的物件是<b>不可見的</b> (它位於 &lt;defs&gt; 之中)

en: Select <b>object(s)</b> to convert to pattern.
zh_TW: 選擇<b>物件</b>以轉換成圖樣。

en: Objects to pattern
zh_TW: 物件轉為式樣

en: Select an <b>object with pattern fill</b> to extract objects from.
zh_TW: 選擇一個<b>有圖樣填充的物件</b>以從中抽離物件。

en: <b>No pattern fills</b> in the selection.
zh_TW: 選取區中<b>無圖樣填充</b>。

en: Pattern to objects
zh_TW: 式樣轉為物件

en: Select <b>object(s)</b> to make a bitmap copy.
zh_TW: 選擇<b>物件</b>以製作像素圖複本。

en: Create bitmap
zh_TW: 建立點陣圖

en: Select <b>object(s)</b> to create clippath or mask from.
zh_TW: 選擇<b>物件</b>以建立剪裁路徑或是遮罩。

en: Select mask object and <b>object(s)</b> to apply clippath or mask to.
zh_TW: 選擇遮罩物件和<b>物件</b>以套用剪裁路徑或是遮罩。

en: Set clipping path
zh_TW: 設定裁剪路徑

en: Set mask
zh_TW: 設定遮罩

en: Select <b>object(s)</b> to remove clippath or mask from.
zh_TW: 選擇<b>物件</b>以去除剪裁路徑或是遮罩。

en: Release clipping path
zh_TW: 釋出裁剪路徑

en: Release mask
zh_TW: 釋出遮罩

en: Fit page to selection
zh_TW: 調整頁面以符合選擇

en: Link
zh_TW: 連線

en: Circle
zh_TW: 圓

note: ellipse
en: Ellipse
zh_TW: 橢圓

en: Flowed text
zh_TW: 浮動文字

en: Line
zh_TW: 線

en: Path
zh_TW: 路徑

en: Polygon
zh_TW: 多邊形

en: Polyline
zh_TW: 折線

note: Rectangle
en: Rectangle
zh_TW: 矩形

en: Offset path
zh_TW: 偏移路徑

note: spiral
en: Spiral
zh_TW: 螺旋

note: star
en: Star
zh_TW: 星形

en: Click selection to toggle scale/rotation handles
zh_TW: 點選選取區以切換大小調整或旋轉控制

note: no items
en: No objects selected. Click, Shift+click, or drag around objects to select.
zh_TW: 沒有選取物件。用點選﹑Shift+點選或在物件四周拖曳來選取物件。

en: root
zh_TW: 根

en: layer <b>%s</b>
zh_TW: 第<b>%s</b>層

en: layer <b><i>%s</i></b>
zh_TW: 第<b><i>%s</i></b>層

en:  in %s
zh_TW:  在%s

en:  in group %s (%s)
zh_TW:  在群組 %s (%s)

en:  in <b>%i</b> parents (%s) |  in <b>%i</b> parents (%s)
zh_TW[0]:  在<b>%i</b>上層中(%s)

en:  in <b>%i</b> layers |  in <b>%i</b> layers
zh_TW[0]:  在<b>%i</b>層中

en: Use <b>Shift+D</b> to look up original
zh_TW: 利用 <b>Shift+D</b> 來尋找原始物件

en: Use <b>Shift+D</b> to look up path
zh_TW: 利用 <b>Shift+D</b> 來找尋路徑

en: Use <b>Shift+D</b> to look up frame
zh_TW: 利用 <b>Shift+D</b> 來找尋訊框

note: this is only used with 2 or more objects
en: <b>%i</b> object selected | <b>%i</b> objects selected
zh_TW[0]: 已選擇 <b>%i</b> 個物件

note: this is only used with 2 or more objects
en: <b>%i</b> object of type <b>%s</b> | <b>%i</b> objects of type <b>%s</b>
zh_TW[0]: <b>%i</b>個物件類型為<b>%s</b>

note: this is only used with 2 or more objects
en: <b>%i</b> object of types <b>%s</b>, <b>%s</b> | <b>%i</b> objects of types <b>%s</b>, <b>%s</b>
zh_TW[0]: <b>%i</b>個物件類型為<b>%s</b>，<b>%s</b>

note: this is only used with 2 or more objects
en: <b>%i</b> object of types <b>%s</b>, <b>%s</b>, <b>%s</b> | <b>%i</b> objects of types <b>%s</b>, <b>%s</b>, <b>%s</b>
zh_TW[0]: <b>%i</b>個物件類型為<b>%s</b>，<b>%s</b>，<b>%s</b>

note: this is only used with 2 or more objects
en: <b>%i</b> object of <b>%i</b> types | <b>%i</b> objects of <b>%i</b> types
zh_TW[0]: <b>%i</b>個物件個<b>%i</b>類型

en: %s%s. %s.
zh_TW: %s%s。%s。

en: Skew
zh_TW: 歪斜

en: Set center
zh_TW: 設定中心點

en: <b>Center</b> of rotation and skewing: drag to reposition; scaling with Shift also uses this center
zh_TW: 旋轉以及偏斜的<b>中心點</b>: 拖曳以改變位置；按住 Shift 以改變物件比例時也是使用此中心點。

en: <b>Squeeze or stretch</b> selection; with <b>Ctrl</b> to scale uniformly; with <b>Shift</b> to scale around rotation center
zh_TW: <b>擠壓或伸展</b>選擇區；以 <b>Ctrl</b> 來均勻地伸縮；以 <b>Shift</b> 來在旋轉中心四周伸縮

en: <b>Scale</b> selection; with <b>Ctrl</b> to scale uniformly; with <b>Shift</b> to scale around rotation center
zh_TW: <b>伸縮</b>選擇區；以 <b>Ctrl</b> 來均勻地伸縮；以 <b>Shift</b> 來在旋轉中心四周伸縮

en: <b>Skew</b> selection; with <b>Ctrl</b> to snap angle; with <b>Shift</b> to skew around the opposite side
zh_TW: <b>偏斜</b>選擇區；以 <b>Ctrl</b> 來抓取角度；以 <b>Shift</b> 來繞著相對面偏斜

en: <b>Rotate</b> selection; with <b>Ctrl</b> to snap angle; with <b>Shift</b> to rotate around the opposite corner
zh_TW: <b>旋轉</b>選擇區；以 <b>Ctrl</b> 來抓取角度；以 <b>Shift</b> 繞著相對面旋轉

en: Reset center
zh_TW: 重置中心點

en: <b>Scale</b>: %0.2f%% x %0.2f%%; with <b>Ctrl</b> to lock ratio
zh_TW: <b>伸縮</b>: %0.2f%% x %0.2f%%；以 <b>Ctrl</b> 來鎖定長寬比

note: TRANSLATORS: don't modify the first ";" (it will NOT be displayed as ";" - only the second one will be)
en: <b>Skew</b>: %0.2f&#176;; with <b>Ctrl</b> to snap angle
zh_TW: <b>偏斜</b>: %0.2f&#176;；以 <b>Ctrl</b> 來抓取角度

note: TRANSLATORS: don't modify the first ";" (it will NOT be displayed as ";" - only the second one will be)
en: <b>Rotate</b>: %0.2f&#176;; with <b>Ctrl</b> to snap angle
zh_TW: <b>旋轉</b>: %0.2f&#176;；以 <b>Ctrl</b> 來抓取角度

en: Move <b>center</b> to %s, %s
zh_TW: 移動<b>中心點</b>到 %s, %s

en: <b>Move</b> by %s, %s; with <b>Ctrl</b> to restrict to horizontal/vertical; with <b>Shift</b> to disable snapping
zh_TW: <b>移動</b>透過 %s﹑%s；以 <b>Ctrl</b> 來限制為水平/垂直；以 <b>Shift</b> 來停用抓取

en: Drag curve
zh_TW: 拖曳曲線

en: <b>Link</b> to %s
zh_TW: <b>連結</b> 到 %s

en: <b>Link</b> without URI
zh_TW: <b>連結</b>不具 URI

en: <b>Ellipse</b>
zh_TW: <b>橢圓形</b>

en: <b>Circle</b>
zh_TW: <b>圓形</b>

en: <b>Segment</b>
zh_TW: <b>扇形</b>

en: <b>Arc</b>
zh_TW: <b>弧</b>

note: TRANSLATORS: "Flow region" is an area where text is allowed to flow
en: Flow region
zh_TW: 流動區域

note: TRANSLATORS: A region "cut out of" a flow region; text is not allowed to flow inside the * flow excluded region.  flowRegionExclude in SVG 1.2: see * http://www.w3.org/TR/2004/WD-SVG12-20041027/flow.html#flowRegion-elem and * http://www.w3.org/TR/2004/WD-SVG12-20041027/flow.html#flowRegionExclude-el
en: Flow excluded region
zh_TW: 流動排除區域

en: <b>Flowed text</b> (%d character) | <b>Flowed text</b> (%d characters)
zh_TW[0]: <b>浮動文字</b> (%d 個字元)

en: <b>Linked flowed text</b> (%d character) | <b>Linked flowed text</b> (%d characters)
zh_TW[0]: <b>連結的浮動文字</b>(%d 個字元)

en: embedded
zh_TW: 內嵌

en: <b>Image with bad reference</b>: %s
zh_TW: <b>參照品質不良的圖片</b>: %s

en: <b>Image</b> %d &#215; %d: %s
zh_TW: <b>圖片</b> %d &#215; %d: %s

en: <b>Group</b> of <b>%d</b> object | <b>Group</b> of <b>%d</b> objects
zh_TW[0]: <b>%d</b> 項物件的<b>群組</b>

en: Object
zh_TW: 物件

en: %s; <i>clipped</i>
zh_TW: %s；<i>已裁剪</i>

en: %s; <i>masked</i>
zh_TW: %s；<i>已遮罩</i>

en: <b>Line</b>
zh_TW: <b>線條</b>

note: TRANSLATORS COMMENT: %s is either "outset" or "inset" depending on sign
en: <b>Linked offset</b>, %s by %f pt
zh_TW: <b>連結偏移</b>，%s 於 %f 點

en: outset
zh_TW: 外貼

en: inset
zh_TW: 內插

note: TRANSLATORS COMMENT: %s is either "outset" or "inset" depending on sign
en: <b>Dynamic offset</b>, %s by %f pt
zh_TW: <b>動態偏移</b>，%s 於 %f 點

en: <b>Path</b> (%i node) | <b>Path</b> (%i nodes)
zh_TW[0]: <b>路徑</b> (%i 節點)

en: <b>Polygon</b>
zh_TW: <b>多邊形</b>

en: <b>Polyline</b>
zh_TW: <b>多折線</b>

en: <b>Rectangle</b>
zh_TW: <b>矩形</b>

note: TRANSLATORS: since turn count isn't an integer, please adjust the string as needed to deal with an localized plural forms.
en: <b>Spiral</b> with %3f turns
zh_TW: %3f 個彎的<b>螺旋形</b>

en: <b>Star</b> with %d vertex | <b>Star</b> with %d vertices
zh_TW[0]: <b>星形</b>具備 %d 個頂點

en: <b>Polygon</b> with %d vertex | <b>Polygon</b> with %d vertices
zh_TW[0]: <b>多邊形</b>具備 %d 個頂點

en: <b>Conditional group</b> of <b>%d</b> object | <b>Conditional group</b> of <b>%d</b> objects
zh_TW[0]: 在<b>%d</b>物件中的<b>條件群組</b>

note: TRANSLATORS: For description of font with no name.
en: &lt;no name found&gt;
zh_TW: &lt;名稱不明&gt;

en: <b>Text on path</b> (%s, %s)
zh_TW: <b>繞徑文字</b> (%s, %s)

en: <b>Text</b> (%s, %s)
zh_TW: <b>文字</b> (%s, %s)

en: <b>Clone</b> of: %s
zh_TW: %s 的<b>複本</b>

en: <b>Orphaned clone</b>
zh_TW: <b>無原件之複本</b>

en: <b>Ctrl</b>: snap angle
zh_TW: <b>Ctrl</b>: 抓取角度

en: <b>Alt</b>: lock spiral radius
zh_TW: <b>Alt</b>: 鎖定放射半徑

en: <b>Spiral</b>: radius %s, angle %5g&#176;; with <b>Ctrl</b> to snap angle
zh_TW: <b>旋轉</b>: 半徑 %s，角度 %5g&#176;；以 <b>Ctrl</b> 來抓取角度

en: Create spiral
zh_TW: 建立螺旋形

en: Union
zh_TW: 聯集

en: Intersection
zh_TW: 交集

en: Difference
zh_TW: 差集

en: Exclusion
zh_TW: 互斥

en: Division
zh_TW: 除法

en: Cut path
zh_TW: 剪下路徑

en: Select <b>at least 2 paths</b> to perform a boolean operation.
zh_TW: 選擇<b>至少兩條路徑</b>以進行布林運算。

en: Select <b>at least 1 path</b> to perform a boolean union.
zh_TW: 選取<b>至少一條路徑</b>以進行布林運算。

en: Select <b>exactly 2 paths</b> to perform difference, XOR, division, or path cut.
zh_TW: 選擇<b>剛好兩條路徑</b>來進行差異比較﹑XOR﹑分割或是路徑切割。

en: Unable to determine the <b>z-order</b> of the objects selected for difference, XOR, division, or path cut.
zh_TW: 無法決定所選物件的<b>z-order</b>來進行差異比較﹑XOR﹑分割或是路徑切割。

en: One of the objects is <b>not a path</b>, cannot perform boolean operation.
zh_TW: 其中一個物件<b>不是路徑</b>，無法進行布林運算。

en: Select <b>stroked path(s)</b> to convert stroke to path.
zh_TW: 選取<b>畫筆的路徑</b>以轉換筆畫為路徑。

en: Convert stroke to path
zh_TW: 把筆畫轉化成路徑

note: TRANSLATORS: "to outline" means "to convert stroke to path"
en: <b>No stroked paths</b> in the selection.
zh_TW: 選取區中<b>無筆畫的路徑</b>。

en: Selected object is <b>not a path</b>, cannot inset/outset.
zh_TW: 所選取的物件<b>不是路徑</b>，無法內插/外貼。

en: Create linked offset
zh_TW: 建立連結的偏移

en: Create dynamic offset
zh_TW: 建立動態偏移

en: Select <b>path(s)</b> to inset/outset.
zh_TW: 選擇<b>路徑</b>以進行內插/外貼。

en: Outset path
zh_TW: 外貼路徑

en: Inset path
zh_TW: 內插路徑

en: <b>No paths</b> to inset/outset in the selection.
zh_TW: 選取區中<b>沒有路徑</b>可以進行內插/外貼。

en: Select <b>path(s)</b> to simplify.
zh_TW: 選擇<b>路徑</b>以簡化。

en: Simplify
zh_TW: 簡化

en: <b>No paths</b> to simplify in the selection.
zh_TW: 選取區中<b>沒有路徑</b>可以化簡。

en: <b>Ctrl</b>: snap angle; keep rays radial
zh_TW: <b>Ctrl</b>: 抓取角度；保持幅線放射狀

en: <b>Polygon</b>: radius %s, angle %5g&#176;; with <b>Ctrl</b> to snap angle
zh_TW: <b>多邊形</b>: 半徑 %s，角度 %5g&#176;；以 <b>Ctrl</b> 來抓取角度

en: <b>Star</b>: radius %s, angle %5g&#176;; with <b>Ctrl</b> to snap angle
zh_TW: <b>星形</b>: 半徑 %s，角度 %5g&#176;；以 <b>Ctrl</b> 來抓取角度

en: Create star
zh_TW: 建立星型

en: Select <b>a text and a path</b> to put text on path.
zh_TW: 選擇<b>文字與路徑</b>以將文字置於路徑之上。

en: This text object is <b>already put on a path</b>. Remove it from the path first. Use <b>Shift+D</b> to look up its path.
zh_TW: 文字物件<b>已放置在路徑上</b>。首先從路徑上移除。使用 <b>Shift+D</b> 搜尋路徑。

note: rect is the only SPShape which is not <path> yet, and thus SVG forbids us from putting text on it
en: You cannot put text on a rectangle in this version. Convert rectangle to path first.
zh_TW: 您無法在這個版本中將文字放在矩形之上。請先將矩形轉換成路徑。

en: The flowed text(s) must be <b>visible</b> in order to be put on a path.
zh_TW: 流動的文字必須是<b>可見的</b>以便置放於路徑。

en: Put text on path
zh_TW: 放置文字於路徑上

en: Select <b>a text on path</b> to remove it from path.
zh_TW: 選擇<b>文字與路徑</b>以將文字從路徑之上移除。

en: <b>No texts-on-paths</b> in the selection.
zh_TW: 選取區中<b>沒有路徑上的文字</b>。

en: Remove text from path
zh_TW: 從路徑移除文字

en: Select <b>text(s)</b> to remove kerns from.
zh_TW: 選取<b>文字</b>以從其中移除突出部份。

en: Remove manual kerns
zh_TW: 移除手動字距

en: Select <b>a text</b> and one or more <b>paths or shapes</b> to flow text into frame.
zh_TW: 選取<b>一段文字</b>與一或多條<b>路徑或形狀</b>來讓文字在圖框中流動。

en: Flow text into shape
zh_TW: 流動文字轉為形狀

en: Select <b>a flowed text</b> to unflow it.
zh_TW: 選擇<b>流動文字</b>以停止其流動。

en: Unflow flowed text
zh_TW: 取消流動的文字

en: Select <b>flowed text(s)</b> to convert.
zh_TW: 選取<b>流動文字</b>以轉換。

en: The flowed text(s) must be <b>visible</b> in order to be converted.
zh_TW: 流動文字必須是<b>可見的</b>以便轉換。

en: Convert flowed text to text
zh_TW: 轉換流動文字為文字

en: <b>No flowed text(s)</b> to convert in the selection.
zh_TW: 選取區中<b>無流動文字</b>可轉換。

en: <b>Click</b> to edit the text, <b>drag</b> to select part of the text.
zh_TW: <b>點選</b>以編輯文字，<b>拖曳</b>以選取部份文字。

en: <b>Click</b> to edit the flowed text, <b>drag</b> to select part of the text.
zh_TW: <b>點擊</b>以編輯流動文字，<b>拖曳</b>以選擇部份文字。

en: Create text
zh_TW: 建立文字

en: Non-printable character
zh_TW: 不可列印字元

en: Insert Unicode character
zh_TW: 插入萬國碼字元

en: Unicode (<b>Enter</b> to finish): %s: %s
zh_TW: 萬國碼 (<b>Enter</b>表示完成)：%s：%s

en: Unicode (<b>Enter</b> to finish):
zh_TW: 萬國碼 (<b>Enter</b>表示完成)：

en: <b>Flowed text frame</b>: %s &#215; %s
zh_TW: <b>流動的文字訊框</b>: %s &#215; %s

en: Type text; <b>Enter</b> to start new line.
zh_TW: 輸入文字；按 <b>Enter</b> 以啟始新列。

en: Flowed text is created.
zh_TW: 已建立流動文字。

en: Create flowed text
zh_TW: 建立流動文字

en: The frame is <b>too small</b> for the current font size. Flowed text not created.
zh_TW: 訊框對於目前字型大小來說<b>太小</b>。並未建立流動文字。

en: No-break space
zh_TW: 不斷列空白

en: Insert no-break space
zh_TW: 插入不斷列空白

en: Make bold
zh_TW: 製作粗體

en: Make italic
zh_TW: 製作斜體

en: New line
zh_TW: 換列

en: Backspace
zh_TW: 退格鍵

en: Kern to the left
zh_TW: 字距向左微調

en: Kern to the right
zh_TW: 字距向右微調

en: Kern up
zh_TW: 字距向上微調

en: Kern down
zh_TW: 字距向下微調

en: Rotate counterclockwise
zh_TW: 逆時針旋轉

en: Rotate clockwise
zh_TW: 順時針旋轉

en: Contract line spacing
zh_TW: 縮小列距

en: Contract letter spacing
zh_TW: 縮小字距

en: Expand line spacing
zh_TW: 展開列距

en: Expand letter spacing
zh_TW: 展開字距

en: Paste text
zh_TW: 貼上文字

en: Type flowed text; <b>Enter</b> to start new paragraph.
zh_TW: 輸入流動文字；按 <b>Enter</b> 以開始新的段落。

en: <b>Click</b> to select or create text, <b>drag</b> to create flowed text; then type.
zh_TW: <b>點選</b>以選取或建立文字，<b>拖曳</b>以建立流動文字；然後開始輸入。

en: Type text
zh_TW: 輸入文字

en: To edit a path, <b>click</b>, <b>Shift+click</b>, or <b>drag around</b> nodes to select them, then <b>drag</b> nodes and handles. <b>Click</b> on an object to select.
zh_TW: 要編輯路徑，請<b>click</b>﹑<b>Shift+click</b> 或在節點周圍<b>拖曳</b>以選擇它們，然後<b>拖曳</b>節點與控柄。請<b>點選</b>一個物件以選擇。

en: <b>Drag</b> to create a rectangle. <b>Drag controls</b> to round corners and resize. <b>Click</b> to select.
zh_TW: <b>拖曳</b>以建立矩形。<b>拖曳控柄</b>可調整圓角及大小。<b>點一下</b>以選擇。

en: <b>Drag</b> to create an ellipse. <b>Drag controls</b> to make an arc or segment. <b>Click</b> to select.
zh_TW: <b>拖曳</b>以建立橢圓形。<b>拖曳控柄</b>可製作弧形或扇形。<b>點一下</b>以選擇。

en: <b>Drag</b> to create a star. <b>Drag controls</b> to edit the star shape. <b>Click</b> to select.
zh_TW: <b>拖曳</b>以建立星形。<b>拖曳控柄</b>以編輯星形的形狀。<b>點一下</b>以選擇。

en: <b>Drag</b> to create a spiral. <b>Drag controls</b> to edit the spiral shape. <b>Click</b> to select.
zh_TW: <b>拖曳</b>以建立螺旋形。<b>拖曳控柄</b>可編輯螺旋的形狀。<b>點一下</b>以選擇。

en: <b>Drag</b> or <b>double click</b> to create a gradient on selected objects, <b>drag handles</b> to adjust gradients.
zh_TW: <b>拖曳</b>或<b>雙擊滑鼠</b>以於所選物件上建立漸層，<b>拖曳控柄</b>以調整漸層。

en: <b>Click</b> or <b>drag around an area</b> to zoom in, <b>Shift+click</b> to zoom out.
zh_TW: <b>點選</b>或<b>在區域周圍拖曳</b>以進行放大，按住 <b>Shift</b> 然後再點選可以縮小。

en: <b>Click and drag</b> between shapes to create a connector.
zh_TW: 在形狀之間<b>點擊與拖曳</b>以建立連接器。

en: Trace: %d.  %ld nodes
zh_TW: 勾描: %d。 %ld 節點

en: Select an <b>image</b> to trace
zh_TW: 選擇<b>圖案</b>以勾描

en: Select only one <b>image</b> to trace
zh_TW: 只選擇一幅<b>圖像</b>勾描

en: Select one image and one or more shapes above it
zh_TW: 選擇一幅圖像和它之上的一個或多個形狀

en: Trace: No active desktop
zh_TW: 勾描：無作用中桌面

en: Invalid SIOX result
zh_TW: 無效的 SIOX 結果

en: Trace: No active document
zh_TW: 勾描: 無開啟的文件

en: Trace: Image has no bitmap data
zh_TW: 勾描: 圖片無點陣圖資料

en: Trace: Starting trace...
zh_TW: 勾描：開始勾描…

note: ## inform the document, so we can undo
en: Trace bitmap
zh_TW: 勾描點陣圖

en: Trace: Done. %ld nodes created
zh_TW: 勾描: 已完成。%ld 個節點已建立

note: Item dialog
en: Object _Properties
zh_TW: 物件屬性(_P)...

note: Select item
en: _Select This
zh_TW: 選擇這個(_S)

note: Create link
en: _Create Link
zh_TW: 建立連結(_C)

en: Create link
zh_TW: 建立連結

note: "Ungroup"
en: _Ungroup
zh_TW: 解除群組(_U)

note: Link dialog
en: Link _Properties
zh_TW: 連結屬性(_P)

note: Select item
en: _Follow Link
zh_TW: 跟隨連結(_F)

note: Reset transformations
en: _Remove Link
zh_TW: 移除連結(_R)

note: Link dialog
en: Image _Properties
zh_TW: 圖片屬性(_P)

note: Item dialog
en: _Fill and Stroke
zh_TW: 填充與邊框(_F)

note: * * Constructor
en: About Inkscape
zh_TW: 關於 Inkscape

en: _Splash
zh_TW: 啟動畫面(_S)

en: _Authors
zh_TW: 作者(_A)

en: _Translators
zh_TW: 譯者(_T)

en: _License
zh_TW: 授權(_L)

en: Align
zh_TW: 對齊

en: Distribute
zh_TW: 分佈

en: Minimum horizontal gap (in px units) between bounding boxes
zh_TW: 邊界之間的最小水平間隙(以像素為單位)

note: TRANSLATORS: Horizontal gap
en: H:
zh_TW: 高:

en: Minimum vertical gap (in px units) between bounding boxes
zh_TW: 邊界之間的最小垂直間隙(以像素為單位)

note: TRANSLATORS: Vertical gap
en: V:
zh_TW: 垂直：

en: Remove overlaps
zh_TW: 去除重疊

en: Arrange connector network
zh_TW: 排列連接器網路

en: Unclump
zh_TW: 拆解

en: Randomize positions
zh_TW: 隨機位置

en: Distribute text baselines
zh_TW: 散佈文字基線

en: Align text baselines
zh_TW: 對齊文字基線

en: Connector network layout
zh_TW: 連線器網路版面設置

en: Nodes
zh_TW: 節點

en: Relative to:
zh_TW: 相對於:

en: Align right sides of objects to left side of anchor
zh_TW: 將物件的右側對齊到錨點的左側

en: Align left sides
zh_TW: 對齊左側

en: Center on vertical axis
zh_TW: 垂直置中

en: Align right sides
zh_TW: 對齊右側

en: Align left sides of objects to right side of anchor
zh_TW: 將物件的左側對齊到錨點的右側

en: Align bottoms of objects to top of anchor
zh_TW: 將物件的底部對齊到錨點的頂端

en: Align tops
zh_TW: 對齊頂端

en: Center on horizontal axis
zh_TW: 水平置中

en: Align bottoms
zh_TW: 對齊底部

en: Align tops of objects to bottom of anchor
zh_TW: 將物件的頂端對齊到錨點的底部

en: Align baseline anchors of texts vertically
zh_TW: 垂直對齊文字基線的錨點

en: Align baseline anchors of texts horizontally
zh_TW: 水平對齊文字基線的錨點

en: Make horizontal gaps between objects equal
zh_TW: 物件間以同樣的水平距離來分佈

en: Distribute left sides equidistantly
zh_TW: 以物件左側的平均距離來分佈

en: Distribute centers equidistantly horizontally
zh_TW: 以物件中央的平均距離來水平分佈

en: Distribute right sides equidistantly
zh_TW: 以物件右側的平均距離來分佈

en: Make vertical gaps between objects equal
zh_TW: 物件間以同樣的垂直距離來分佈

en: Distribute tops equidistantly
zh_TW: 以物件頂端的平均距離來分佈

en: Distribute centers equidistantly vertically
zh_TW: 以物件中央的平均垂直距離來分佈

en: Distribute bottoms equidistantly
zh_TW: 以物件底部的平均距離來分佈

en: Distribute baseline anchors of texts horizontally
zh_TW: 水平分佈文字基線的錨點

en: Distribute baseline anchors of texts vertically
zh_TW: 垂直分佈文字基線的錨點

en: Randomize centers in both dimensions
zh_TW: 在兩個維度上隨機置中

en: Unclump objects: try to equalize edge-to-edge distances
zh_TW: 拆散物件: 嘗試邊對邊等距

en: Move objects as little as possible so that their bounding boxes do not overlap
zh_TW: 移動物件盡可能小，以便邊界不重疊

en: Nicely arrange selected connector network
zh_TW: 最佳化排列選擇的連線器網路

en: Align selected nodes horizontally
zh_TW: 水平對齊所選節點

en: Align selected nodes vertically
zh_TW: 垂直對齊所選節點

en: Distribute selected nodes horizontally
zh_TW: 水平分佈選取之節點

en: Distribute selected nodes vertically
zh_TW: 垂直分佈選取之節點

note: Rest of the widgetry
en: Last selected
zh_TW: 最後的選擇

en: First selected
zh_TW: 第一個選擇

en: Biggest item
zh_TW: 以最大者為準

en: Smallest item
zh_TW: 以最小者為準

en: Drawing
zh_TW: 繪圖

en: Metadata
zh_TW: 後設資料

en: License
zh_TW: 授權

en: <b>Dublin Core Entities</b>
zh_TW: <b>都柏林核心實體</b>

en: <b>License</b>
zh_TW: <b>授權</b>

note: ---------------------------------------------------------------
en: Show page _border
zh_TW: 顯示頁面邊界(_B)

en: If set, rectangular page border is shown
zh_TW: 如果設定，矩形頁面邊界可見

en: Border on _top of drawing
zh_TW: 繪圖的頂部邊界(_T)

en: If set, border is always on top of the drawing
zh_TW: 如果設定，邊界始終在繪圖的頂部

en: _Show border shadow
zh_TW: 顯示邊界陰影(_S)

en: If set, page border shows a shadow on its right and lower side
zh_TW: 如果設定，頁面邊界會在右下邊顯示陰影

en: Back_ground:
zh_TW: 背景(_G)

en: Background color
zh_TW: 背景顏色

en: Color and transparency of the page background (also used for bitmap export)
zh_TW: 頁面背景的顏色與透明度(同時用於點陣圖匯出)

en: Border _color:
zh_TW: 邊界色彩(_C)：

en: Page border color
zh_TW: 頁面邊界色

en: Color of the page border
zh_TW: 頁面邊界的色彩

note: --------------------------------------------------------------- General snap options
en: Show _guides
zh_TW: 顯示參考線(_G)

en: Show or hide guides
zh_TW: 顯示或隱藏參考線

en: Guide co_lor:
zh_TW: 參考線色彩(_L)

en: Guideline color
zh_TW: 參考線顏色

en: Color of guidelines
zh_TW: 參考線的顏色

en: _Highlight color:
zh_TW: 高亮度色(_H)：

en: Highlighted guideline color
zh_TW: 高亮度的參考線顏色

en: Color of a guideline when it is under mouse
zh_TW: 參考線位於滑鼠下方時的顏色

en: Default _units:
zh_TW: 預設單位(_U)：

en: <b>General</b>
zh_TW: <b>一般</b>

en: <b>Border</b>
zh_TW: <b>邊界</b>

en: <b>Format</b>
zh_TW: <b>格式</b>

en: <b>Guides</b>
zh_TW: <b>參考線</b>

en: Export
zh_TW: 匯出

en: Information
zh_TW: 資訊

en: Help
zh_TW: 輔助

en: Parameters
zh_TW: 參數

en: Fill
zh_TW: 填充

en: Stroke _paint
zh_TW: 邊框顏色(_P)

en: Stroke st_yle
zh_TW: 邊框樣式(_Y)

note: # end multiple scan ## end mode page
en: Mode
zh_TW: 模式

en: Exponent
zh_TW: 指數

en: Mouse
zh_TW: 滑鼠

en: Grab sensitivity:
zh_TW: 抓取靈敏度:

en: pixels
zh_TW: 像素

en: How close on the screen you need to be to an object to be able to grab it with mouse (in screen pixels)
zh_TW: 在螢幕上您需要離某個物件多近，以便能夠用滑鼠來擷取它(以螢幕像素為單位)

en: Click/drag threshold:
zh_TW: 點/拖曳門檻值:

en: Maximum mouse drag (in screen pixels) which is considered a click, not a drag
zh_TW: 被認為是點擊而非拖曳的滑鼠拖曳最大值(以螢幕像素為單位)

en: Scrolling
zh_TW: 捲動

en: Mouse wheel scrolls by:
zh_TW: 滑鼠滾輪捲動:

en: One mouse wheel notch scrolls by this distance in screen pixels (horizontally with Shift)
zh_TW: 一格滑鼠滾輪刻度在螢幕上捲動的像素距離(加上 Shift 表示水平)

en: Ctrl+arrows
zh_TW: Ctrl+方向鍵

en: Scroll by:
zh_TW: 捲動:

en: Pressing Ctrl+arrow key scrolls by this distance (in screen pixels)
zh_TW: 按下 Ctrl+方向鍵在螢幕上捲動的像素距離

en: Acceleration:
zh_TW: 加速:

en: Pressing and holding Ctrl+arrow will gradually speed up scrolling (0 for no acceleration)
zh_TW: 按住 Ctrl+方向鍵將會逐漸地加速捲動(0 表示沒有加速)

en: Autoscrolling
zh_TW: 自動捲動

en: Speed:
zh_TW: 速度:

en: How fast the canvas autoscrolls when you drag beyond canvas edge (0 to turn autoscroll off)
zh_TW: 您在畫布邊緣之後拖曳時，畫布的自動捲動有多快(0 表示關閉自動捲動)

en: Threshold:
zh_TW: 門檻值:

en: How far (in screen pixels) you need to be from the canvas edge to trigger autoscroll; positive is outside the canvas, negative is within the canvas
zh_TW: 您需要離畫布邊緣多遠(以螢幕像素為單位)，來觸發自動捲動；正數位於畫布外側，負數位於畫布內側

en: Steps
zh_TW: 步驟

note: nudgedistance is limited to 1000 in select-context.cpp: use the same limit here
en: Arrow keys move by:
zh_TW: 方向鍵移動單位:

en: Pressing an arrow key moves selected object(s) or node(s) by this distance (in px units)
zh_TW: 按下方向鍵移動選擇物件或節點時用此距離為單位(依 px 單位)

note: defaultscale is limited to 1000 in select-context.cpp: use the same limit here
en: > and < scale by:
zh_TW: > 與 < 伸縮增量:

en: Pressing > or < scales selection up or down by this increment (in px units)
zh_TW: 按下 > 或 < 將選擇區伸展或縮減時以此增量(依 px 單位)

en: Inset/Outset by:
zh_TW: 內插/外貼:

en: Inset and Outset commands displace the path by this distance (in px units)
zh_TW: 內插與外貼命令以此距離來移開路徑(依 px 單位)

en: Compass-like display of angles
zh_TW: 類似指南針的角度顯示

en: When on, angles are displayed with 0 at north, 0 to 360 range, positive clockwise; otherwise with 0 at east, -180 to 180 range, positive counterclockwise
zh_TW: 開啟時，會顯示角度 0 於北方﹑0 到 360 的範圍﹑順時鐘為正向；否則會以東方為 0﹑-180 到 180 的範圍﹑逆時鐘為正向

en: Rotation snaps every:
zh_TW: 每一旋轉抓附:

en: degrees
zh_TW: 度

en: Rotating with Ctrl pressed snaps every that much degrees; also, pressing [ or ] rotates by this amount
zh_TW: 按住 Ctrl 時的旋轉每次都抓取這麼多角度；同時，按下 [ 或 ] 會以此量旋轉

en: Zoom in/out by:
zh_TW: 縮放增量:

en: Zoom tool click, +/- keys, and middle click zoom in and out by this multiplier
zh_TW: 利用這個倍數來點擊縮放工具﹑+/- 鍵以及中鍵的放大與縮小

en: Show selection cue
zh_TW: 顯示選取區提示

en: Whether selected objects display a selection cue (the same as in selector)
zh_TW: 是否選取的物件會顯示選擇提示(如同在選擇器之中)

en: Enable gradient editing
zh_TW: 啟用漸層編輯

en: Whether selected objects display gradient editing controls
zh_TW: 是否選取的物件會顯示漸層編輯控制項

en: <b>No objects selected</b> to take the style from.
zh_TW: <b>無選取物件</b>可做為樣式取得來源。

en: <b>More than one object selected.</b>  Cannot take style from multiple objects.
zh_TW: <b>選取超過一個物件。</b>無法從數個物件取得樣式。

en: Create new objects with:
zh_TW: 建立新物件:

en: Last used style
zh_TW: 最後使用的風格

en: Apply the style you last set on an object
zh_TW: 套用最近設定物件的風格

en: This tool's own style:
zh_TW: 此工具的專屬樣式:

en: Each tool may store its own style to apply to the newly created objects. Use the button below to set it.
zh_TW: 每個工具可以儲存它本身的樣式，以套用至新建立的物件。利用下方的按鈕去設定它。

en: Take from selection
zh_TW: 從選取區取得

en: Remember the style of the (first) selected object as this tool's style
zh_TW: 記住(第一次)所選物件的樣式做為此工具的樣式

en: Tools
zh_TW: 工具

en: Width is in absolute units
zh_TW: 寬度是絕對單位

en: Don't attach connectors to text objects
zh_TW: 不要在文字物件上附加連線器

note: Selector
en: Selector
zh_TW: 選取器

en: When transforming, show:
zh_TW: 轉換時，顯示:

en: Objects
zh_TW: 物件

en: Show the actual objects when moving or transforming
zh_TW: 移動時或轉換時顯示實際的物件

en: Box outline
zh_TW: 外框

en: Show only a box outline of the objects when moving or transforming
zh_TW: 移動時或轉換時只顯示物件的外框

en: Per-object selection cue:
zh_TW: 每一物件的選取提示:

en: No per-object selection indication
zh_TW: 沒有每一物件的選取提示

en: Mark
zh_TW: 標記

en: Each selected object has a diamond mark in the top left corner
zh_TW: 每個選取的物件會有一個菱形的標記在左上角

en: Box
zh_TW: 方框

en: Each selected object displays its bounding box
zh_TW: 每個選取的物件會顯示他的範圍方框

note: Node
en: Node
zh_TW: 節點

note: Zoom
en: Zoom
zh_TW: 縮放

note: Shapes
en: Shapes
zh_TW: 形狀

note: Pencil
en: Pencil
zh_TW: 鉛筆

en: Tolerance:
zh_TW: 允許誤差:

en: This value affects the amount of smoothing applied to freehand lines; lower values produce more uneven paths with more nodes
zh_TW: 此值會影響套用至徒手畫線的平滑程度；較低的值造成具有較多節點的不均勻路徑

note: Pen
en: Pen
zh_TW: 筆

note: Calligraphy
en: Calligraphy
zh_TW: 書法

en: If on, pen width is in absolute units (px) independent of zoom; otherwise pen width depends on zoom so that it looks the same at any zoom
zh_TW: 如果開啟，描邊寬度是與縮放無關的絕對單位(像素)；否則描邊寬度依賴於縮放以便在不同縮放比例下看起來一樣

note: Gradient
en: Gradient
zh_TW: 漸層

note: Connector
en: Connector
zh_TW: 連接器

en: If on, connector attachment points will not be shown for text objects
zh_TW: 如果開啟，對於文字物件連線器的附著點將不顯示

note: Dropper
en: Dropper
zh_TW: 滴管

en: Dialogs are hidden in taskbar
zh_TW: 對話框隱藏於工作列

en: Zoom when window is resized
zh_TW: 隨視窗大小而縮放

en: Show close button on dialogs
zh_TW: 對話方塊上顯示關閉按鈕

en: Normal
zh_TW: 一般模式

en: Aggressive
zh_TW: 積極模式

en: Dialogs stay on top (experimental!)
zh_TW: 對話框保持於最上層 (實驗性質 !)

en: Dialogs on top:
zh_TW: 對話框置於上層

en: Dialogs are treated as regular windows
zh_TW: 對話方塊做為一般視窗

en: Dialogs stay on top of document windows
zh_TW: 對話方塊在文件視窗之上

en: Same as Normal but may work better with some window managers
zh_TW: 一般相同但是某些視窗管理器下工作的更好

en: Whether dialogs should stay on top of document windows. Read the ReleaseNotes on this issue! (Rightclick the taskbar button and press 'Restore' to bring back a minimized document window)
zh_TW: 是否對話框應該保持於文件視窗之上。關於此議題請參閱釋出記要！(右鍵點選工作列按鈕，並按下「還原」以回到最小化的文件視窗)

en: Whether dialog windows are to be hidden in the window manager taskbar
zh_TW: 是否對話框視窗要框隱藏於視窗管理程式的工作列

en: Zoom drawing when document window is resized, to keep the same area visible (this is the default which can be changed in any window using the button above the right scrollbar)
zh_TW: 調整文件視窗大小時縮放圖案，以保持相同區域為可見(此為預設值，在任何使用右側捲動軸上方按鈕的視窗中都可以修改)

en: Whether dialog windows have a close button (requires restart)
zh_TW: 對話方塊視窗是否有關閉按鈕(需要重新啟動)

en: Windows
zh_TW: 視窗

en: Move in parallel
zh_TW: 平行移動

en: Stay unmoved
zh_TW: 不移動

en: Move according to transform
zh_TW: 依據轉換而移動

en: Are unlinked
zh_TW: 已解除連結

en: Are deleted
zh_TW: 已刪除

en: When the original moves, its clones and linked offsets:
zh_TW: 原件移動時，它的複本與相連結的偏移:

en: Clones are translated by the same vector as their original.
zh_TW: 複本是由與它們原件相同的向量所轉譯。

en: Clones preserve their positions when their original is moved.
zh_TW: 當原件移動時，複本保持它們的位置。

en: Each clone moves according to the value of its transform= attribute. For example, a rotated clone will move in a different direction than its original.
zh_TW: 每個複本根據它的 transform= 屬性而移動。舉例來說，旋轉過的複本將會以與其原件不同的方向移動。

en: When the original is deleted, its clones:
zh_TW: 原件刪除後，它的複本:

en: Orphaned clones are converted to regular objects.
zh_TW: 無主的複本會被轉換為一般物件。

en: Orphaned clones are deleted along with their original.
zh_TW: 無主的複本會跟著它們的原件一起被刪除。

en: Uncheck this to use the bottom selected object as the clipping path or mask
zh_TW: 不選取這項將使用底層已選物件做為剪裁路徑或遮罩

en: After applying, remove the object used as the clipping path or mask from the drawing
zh_TW: 套用之後，從繪圖中去除做為剪裁路徑或遮罩的物件

en: Scale stroke width
zh_TW: 伸縮邊框寬度

en: Scale rounded corners in rectangles
zh_TW: 伸縮矩形中的圓角

en: Transform gradients
zh_TW: 轉換漸層

en: Transform patterns
zh_TW: 轉換圖樣

en: Optimized
zh_TW: 最佳化

en: Preserved
zh_TW: 保存

en: When scaling objects, scale the stroke width by the same proportion
zh_TW: 伸縮物件時，以相同比例伸縮框架寬度

en: When scaling rectangles, scale the radii of rounded corners
zh_TW: 伸縮矩形時，同時伸縮圓角的半徑

en: Move gradients (in fill or stroke) along with the objects
zh_TW: 跟著物件轉換漸層(在填充與邊框部份)

en: Move patterns (in fill or stroke) along with the objects
zh_TW: 跟著物件轉換圖樣(在填充或邊框部份)

en: Store transformation:
zh_TW: 儲存變形:

en: If possible, apply transformation to objects without adding a transform= attribute
zh_TW: 如果可能，就套用轉變到物件而不加上 transform= 屬性

en: Always store transformation as a transform= attribute on objects
zh_TW: 總是儲存轉變結果做為物件的 transform= 屬性

en: Transforms
zh_TW: 變形

en: Best quality (slowest)
zh_TW: 最佳品質 (最慢)

en: Better quality (slower)
zh_TW: 較佳品質 (較慢)

en: Average quality
zh_TW: 平均品質

en: Lower quality (faster)
zh_TW: 較低品質 (較快)

en: Lowest quality (fastest)
zh_TW: 最低品質 (最快)

en: Gaussian blur quality for display:
zh_TW: 高斯模糊品質用於顯示：

en: Best quality, but display may be very slow at high zooms (bitmap export always uses best quality)
zh_TW: 最佳品質，但是於高倍縮放時顯示也許會很慢 (點陣圖匯出時自動使用最好品質)

en: Better quality, but slower display
zh_TW: 較佳品質，但是顯示較慢

en: Average quality, acceptable display speed
zh_TW: 平均品質，可接受的顯示速度

en: Lower quality (some artifacts), but display is faster
zh_TW: 較低品質 (某些影像瑕疵)，但是顯示較快

en: Lowest quality (considerable artifacts), but display is fastest
zh_TW: 最低品質 (不少的影像瑕疵)，但是顯示最快

en: Filters
zh_TW: 篩選器

en: Select in all layers
zh_TW: 在所有圖層中選擇

en: Select only within current layer
zh_TW: 只在目前圖層中選擇

en: Select in current layer and sublayers
zh_TW: 在目前圖層和子圖層選擇

en: Deselect upon layer change
zh_TW: 取消圖層的變更

en: Ctrl+A, Tab, Shift+Tab:
zh_TW: Ctrl+A﹑Tab﹑Shift+Tab:

en: Make keyboard selection commands work on objects in all layers
zh_TW: 在所有層上使鍵盤的選擇物件命令生效

en: Make keyboard selection commands work on objects in current layer only
zh_TW: 只在目前圖層上使鍵盤的選擇物件命令生效

en: Make keyboard selection commands work on objects in current layer and all its sublayers
zh_TW: 在目前圖層和它的子圖層上使鍵盤的選擇物件命令生效

en: Uncheck this to be able to keep the current objects selected when the current layer changes
zh_TW: 不選此項讓目前圖層變更時保持目前已選物件

en: Selecting
zh_TW: 選取

en: Default export resolution:
zh_TW: 預設匯出解析度:

en: Default bitmap resolution (in dots per inch) in the Export dialog
zh_TW: 匯出對話框中的預設點陣圖解析度(每英吋幾點)

en: Add label comments to printing output
zh_TW: 為列印輸出加上標籤備註

en: When on, a comment will be added to the raw print output, marking the rendered output for an object with its label
zh_TW: 開啟時，會將一則註解加入原始列印輸入，以它的標籤來標示物件潤算的輸出

en: Simplification threshold:
zh_TW: 簡單化門檻值:

en: How strong is the Simplify command by default. If you invoke this command several times in quick succession, it will act more and more aggressively; invoking it again after a pause restores the default threshold.
zh_TW: 預設的「簡化」命令強度。如果您接連調用此命令許多次，它的動作將會愈來愈強烈；短暫休息之後再調用它會回復預設的閾值。

en: Oversample bitmaps:
zh_TW: 過取樣點陣圖:

en: The maximum length of the Open Recent list in the File menu
zh_TW: 檔案選單中表列的最近開啟文件數的最大值

en: Misc
zh_TW: 雜項

en: Heap
zh_TW: 堆積

en: In Use
zh_TW: 使用中

note: TRANSLATORS: "Slack" refers to memory which is in the heap but currently unused. More typical usage is to call this memory "free" rather than "slack".
en: Slack
zh_TW: 閒置

en: Total
zh_TW: 總計

en: Unknown
zh_TW: 未知

en: Combined
zh_TW: 結合

en: Recalculate
zh_TW: 重算

en: Ready.
zh_TW: 備妥。

en: Enable log display by setting dialogs.debug 'redirect' attribute to 1 in preferences.xml
zh_TW: 藉由設定 preferences.xml 中 dialogs.debug 的「轉向」屬性為 1，來啟用日誌顯示

en: _Execute Python
zh_TW: 執行 Python(_E)

en: _Execute Perl
zh_TW: 執行 Perl(_E)

en: Script
zh_TW: 命令稿

en: Output
zh_TW: 輸出

en: Errors
zh_TW: 錯誤

note: #### begin left panel ### begin notebook ## begin mode page # begin single scan brightness
en: Brightness cutoff
zh_TW: 亮度自動開關

en: Trace by a given brightness level
zh_TW: 依據給定的亮度等級勾描

en: Brightness cutoff for black/white
zh_TW: 黑/白兩色的亮度自動開關

en: Single scan: creates a path
zh_TW: 單一掃描：建立路徑

note: canny edge detection TRANSLATORS: "Canny" is the name of the inventor of this edge detection method
en: Edge detection
zh_TW: 邊緣偵測

en: Trace with optimal edge detection by J. Canny's algorithm
zh_TW: 依據 J. Canny 的最佳化邊緣偵測演算法勾描

en: Brightness cutoff for adjacent pixels (determines edge thickness)
zh_TW: 鄰近像素的亮度自動開關 (決定邊緣粗細)

note: quantization TRANSLATORS: Color Quantization: the process of reducing the number of colors in an image by selecting an optimized set of representative colors and then re-applying this reduced set to the original image.
en: Color quantization
zh_TW: 顏色量化

en: Trace along the boundaries of reduced colors
zh_TW: 沿著減少顏色的邊界勾描

en: The number of reduced colors
zh_TW: 減少顏色數目

en: Colors:
zh_TW: 顏色:

note: swap black and white
en: Invert image
zh_TW: 反轉影像

en: Invert black and white regions
zh_TW: 反轉黑色和白色區域

note: # end single scan # begin multiple scan
en: Brightness steps
zh_TW: 亮度步驟

en: Trace the given number of brightness levels
zh_TW: 勾描給定的亮度等級數目

en: Scans:
zh_TW: 掃瞄:

en: The desired number of scans
zh_TW: 要求的掃瞄數量

en: Colors
zh_TW: 顏色

en: Trace the given number of reduced colors
zh_TW: 勾描給定的減少顏色數目

en: Grays
zh_TW: 灰色

en: Same as Colors, but the result is converted to grayscale
zh_TW: 與「顏色」相同，但是轉換結果為灰階

note: TRANSLATORS: "Smooth" is a verb here
en: Smooth
zh_TW: 平滑

en: Apply Gaussian blur to the bitmap before tracing
zh_TW: 在勾描之前套用「高斯模糊」至點陣圖

note: TRANSLATORS: "Stack" is a verb here
en: Stack scans
zh_TW: 堆疊掃描

en: Stack scans on top of one another (no gaps) instead of tiling (usually with gaps)
zh_TW: 堆疊垂直掃瞄 (無間隙) 或是水平並排 (常常具有間隙)

en: Remove background
zh_TW: 移除背景

en: Remove bottom (background) layer when done
zh_TW: 完成時移除底部(背景)圖層

en: Multiple scans: creates a group of paths
zh_TW: 多重掃描：建立路徑群組

note: ## begin option page # potrace parameters
en: Suppress speckles
zh_TW: 抑制斑點

en: Ignore small spots (speckles) in the bitmap
zh_TW: 忽略點陣圖中的小點 (斑點)

en: Speckles of up to this many pixels will be suppressed
zh_TW: 在此數目以下的斑點將會被抑制

en: Size:
zh_TW: 大小：

en: Smooth corners
zh_TW: 使轉角平滑

en: Smooth out sharp corners of the trace
zh_TW: 使勾描的銳利轉角平滑

en: Increase this to smooth corners more
zh_TW: 增加它以使轉角更平滑

en: Optimize paths
zh_TW: 最佳化路徑

en: Try to optimize paths by joining adjacent Bezier curve segments
zh_TW: 試著藉由聯結相鄰貝茲曲線資料段來最佳化路徑

en: Increase this to reduce the number of nodes in the trace by more aggressive optimization
zh_TW: 增加它以藉由更強的最佳化來縮小在勾描中的節點數量

note: ## end option page
en: Options
zh_TW: 選項

note: ### credits
en: Thanks to Peter Selinger, http://potrace.sourceforge.net
zh_TW: 感謝 Peter Selinger，http://potrace.sourceforge.net

en: Credits
zh_TW: 鳴謝

note: #### begin right panel ## SIOX
en: SIOX foreground selection
zh_TW: SIOX 前景選擇

en: Cover the area you want to select as the foreground
zh_TW: 將您要選取的區域轉換為前景

note: ## preview
en: Update
zh_TW: 更新

en: Preview the intermediate bitmap with the current settings, without actual tracing
zh_TW: 以目前的設定預覽中途的點陣圖，而不需實際的勾描

en: Preview
zh_TW: 預覽

en: Abort a trace in progress
zh_TW: 中止進行中的勾描

en: Execute the trace
zh_TW: 執行勾描

en: _Horizontal
zh_TW: 水平(_H)

en: Horizontal displacement (relative) or position (absolute)
zh_TW: 水平移位(相對)或是位置(絕對)

en: _Vertical
zh_TW: 垂直(_V)

en: Vertical displacement (relative) or position (absolute)
zh_TW: 垂直移位(相對)或是位置(絕對)

en: _Width
zh_TW: 寬度(_W)

en: _Height
zh_TW: 高度(_H)

en: A_ngle
zh_TW: 角度(_N)

en: Rotation angle (positive = counterclockwise)
zh_TW: 旋轉角度(正值 = 逆時針)

en: Horizontal skew angle (positive = counterclockwise), or absolute displacement, or percentage displacement
zh_TW: 水平歪斜角度(正值 = 逆時針)，或絕對移位，或百分比移位

en: Vertical skew angle (positive = counterclockwise), or absolute displacement, or percentage displacement
zh_TW: 垂直歪斜角度(正值 = 逆時針)，或絕對移位，或百分比移位

en: Transformation matrix element A
zh_TW: 變換矩陣元素 A

en: Transformation matrix element B
zh_TW: 變換矩陣元素 B

en: Transformation matrix element C
zh_TW: 變換矩陣元素 C

en: Transformation matrix element D
zh_TW: 變換矩陣元素 D

en: Transformation matrix element E
zh_TW: 變換矩陣元素 E

en: Transformation matrix element F
zh_TW: 變換矩陣元素 F

en: Rela_tive move
zh_TW: 相對移動(_T)

en: Add the specified relative displacement to the current position; otherwise, edit the current absolute position directly
zh_TW: 給目前位置加入指定的相對移位；否則直接編輯目前絕對位置

en: Scale proportionally
zh_TW: 按比例縮放

en: Preserve the width/height ratio of the scaled objects
zh_TW: 保持縮放物件的寬高比

en: Apply to each _object separately
zh_TW: 單獨套用到每一個物件(_O)

en: Apply the scale/rotate/skew to each selected object separately; otherwise, transform the selection as a whole
zh_TW: 分開套用縮放/旋轉/歪斜到每一個已選物件；否則，選擇做為整體變換

en: Edit c_urrent matrix
zh_TW: 編輯目前矩陣(_u)

en: Edit the current transform= matrix; otherwise, post-multiply transform= by this matrix
zh_TW: 編輯目前變換 = 矩陣；否則，右乘變換 = 此矩陣

en: _Move
zh_TW: 移動(_M)

en: _Scale
zh_TW: 縮放(_S)

en: _Rotate
zh_TW: 旋轉(_R)

en: Ske_w
zh_TW: 歪斜(_W)

en: Matri_x
zh_TW: 矩陣(_x)

en: Reset the values on the current tab to defaults
zh_TW: 目前選項頁的值恢復預設

en: Apply transformation to selection
zh_TW: 套用變換到已選物件

en: Edit transformation matrix
zh_TW: 編輯變換矩陣

en: Zoom drawing if window size changes
zh_TW: 隨視窗大小縮放圖案

en: Cursor coordinates
zh_TW: 游標座標

note: display the initial welcome message in the statusbar
en: <b>Welcome to Inkscape!</b> Use shape or freehand tools to create objects; use selector (arrow) to move or transform them.
zh_TW: <b>歡迎使用 Inkscape！</b> 使用形狀或繪圖工具來建立物件；利用選取工具來移動或變化物件。

en: <span weight="bold" size="larger">Save changes to document "%s" before closing?</span>
    
    If you close without saving, your changes will be discarded.
zh_TW: <span weight="bold" size="larger">在關閉前要儲存文件 "%s" 所作的改變嗎？</span>
    
    假如您沒有存檔就關閉，那剛剛做的都會沒有作用。

en: Close _without saving
zh_TW: 關閉但不儲存(_W)

en: tiny
zh_TW: 微小

en: small
zh_TW: 小

en: large
zh_TW: 大

en: huge
zh_TW: 特大

en: List
zh_TW: 清單

en: Proprietary
zh_TW: 所有權

en: Other
zh_TW: 其他

en: Change blur
zh_TW: 變更模糊

en: Change opacity
zh_TW: 變更濁度

en: N/A
zh_TW: 不明

en: Nothing selected
zh_TW: 沒有選擇

en: No fill
zh_TW: 沒有填色

en: No stroke
zh_TW: 沒有描邊

en: Pattern
zh_TW: 圖樣

en: Pattern fill
zh_TW: 圖樣填充

en: Pattern stroke
zh_TW: 描邊圖案

en: Linear gradient fill
zh_TW: 線性漸變填色

en: Linear gradient stroke
zh_TW: 線性漸變描邊

en: Radial gradient fill
zh_TW: 放射漸變填色

en: Radial gradient stroke
zh_TW: 放射漸變繪製

en: Different
zh_TW: 相差

en: Different fills
zh_TW: 相差填色

en: Different strokes
zh_TW: 相差描邊

en: Flat color fill
zh_TW: 平面色彩填色

en: Flat color stroke
zh_TW: 平面色彩描邊

note: TRANSLATOR COMMENT: A means "Averaged"
en: <b>a</b>
zh_TW: <b>均值</b>

en: Fill is averaged over selected objects
zh_TW: 平均填色已選物件

en: Stroke is averaged over selected objects
zh_TW: 平均描邊已選物件

note: TRANSLATOR COMMENT: M means "Multiple"
en: <b>m</b>
zh_TW: <b>多選</b>

en: Multiple selected objects have the same fill
zh_TW: 多選物件填色相同

en: Multiple selected objects have the same stroke
zh_TW: 多選物件描邊相同

en: Edit fill...
zh_TW: 編輯填色…

en: Edit stroke...
zh_TW: 編輯描邊…

en: Last set color
zh_TW: 最近設定色彩

en: Last selected color
zh_TW: 最近選擇的色彩

en: Invert
zh_TW: 反轉

en: White
zh_TW: 白色

en: Black
zh_TW: 黑

en: Copy color
zh_TW: 複製色彩

en: Paste color
zh_TW: 貼上色彩

en: Swap fill and stroke
zh_TW: 交換填色和描邊

en: Make fill opaque
zh_TW: 使填色混濁

en: Make stroke opaque
zh_TW: 使描邊混濁

en: Remove
zh_TW: 移除

en: Apply last set color to fill
zh_TW: 套用最後設定的充填顏色

en: Apply last set color to stroke
zh_TW: 套用最後設定的畫筆顏色

en: Apply last selected color to fill
zh_TW: 套用最後選取的充填顏色

en: Apply last selected color to stroke
zh_TW: 套用最後選取的畫筆顏色

en: Invert fill
zh_TW: 回復填色

en: Invert stroke
zh_TW: 回復描邊

en: White fill
zh_TW: 白色填充

en: White stroke
zh_TW: 白色筆畫

en: Black fill
zh_TW: 黑色填充

en: Black stroke
zh_TW: 黑色筆畫

en: Paste fill
zh_TW: 貼上填充

en: Paste stroke
zh_TW: 貼上筆畫

en: Change stroke width
zh_TW: 變更筆畫寬度

en: Stroke width: %.5g%s%s
zh_TW: 描邊寬度： %.5g%s%s

en:  (averaged)
zh_TW:  (平均)

en: 0 (transparent)
zh_TW: 0 (透明)

en: 100% (opaque)
zh_TW: 100% (混濁)

en: P_age size:
zh_TW: 頁面尺寸(_A)：

en: Page orientation:
zh_TW: 頁面方向：

en: _Landscape
zh_TW: 橫向(_L)

en: _Portrait
zh_TW: 直向(_P)

note: ## Set up custom size frame
en: Custom size
zh_TW: 自訂尺寸

en: _Fit page to selection
zh_TW: 頁面適應選取區(_F)

en: Resize the page to fit the current selection, or the entire drawing if there is no selection
zh_TW: 變更頁面尺寸適合目前選取區，如果沒有選取區整個繪圖

en: U_nits:
zh_TW: 單位(_N)：

en: Width of paper
zh_TW: 紙張寬度

en: _Height:
zh_TW: 高度(_H)：

en: Height of paper
zh_TW: 紙張高度

en: Set page size
zh_TW: 設定頁面大小

en: L Gradient
zh_TW: L 漸變

en: R Gradient
zh_TW: R 漸變

en: Fill: %06x/%.3g
zh_TW: 填充：%06x/%.3g

en: Stroke: %06x/%.3g
zh_TW: 筆畫：%06x/%.3g

en: Stroke width: %.5g%s
zh_TW: 描邊寬度： %.5g%s

en: Opacity: %.3g
zh_TW: 濁度： %.3g

en: No current layer.
zh_TW: 無現行圖層。

en: Raised layer <b>%s</b>.
zh_TW: 提升的圖層 <b>%s</b>。

en: Layer to top
zh_TW: 圖層移到頂端

en: Raise layer
zh_TW: 提升圖層

en: Lowered layer <b>%s</b>.
zh_TW: 降低的圖層 <b>%s</b>。

en: Layer to bottom
zh_TW: 圖層移到底部

en: Lower layer
zh_TW: 降低圖層

en: Cannot move layer any further.
zh_TW: 無法進一步移動圖層。

en: Delete layer
zh_TW: 刪除圖層

note: TRANSLATORS: this means "The layer has been deleted."
en: Deleted layer.
zh_TW: 已刪除圖層。

en: Flip horizontally
zh_TW: 水平翻轉

en: Flip vertically
zh_TW: 垂直翻轉

en: Does nothing
zh_TW: 無動作

en: Create new document from the default template
zh_TW: 使用預設範本建立新的文件

en: _Open...
zh_TW: 開啟(_O)...

en: Open an existing document
zh_TW: 開啟已存在文件

en: Re_vert
zh_TW: 復原(_V)

en: Revert to the last saved version of document (changes will be lost)
zh_TW: 復原至上一次儲存狀態(目前的改變將會遺失)

en: _Save
zh_TW: 儲存(_S)

en: Save document
zh_TW: 儲存文件

en: Save _As...
zh_TW: 另存新檔(_A)...

en: Save document under a new name
zh_TW: 使用新名稱儲存文件

en: Save a Cop_y...
zh_TW: 儲存複本(_Y)…

en: Save a copy of the document under a new name
zh_TW: 使用新名稱儲存文件

en: _Print...
zh_TW: 列印(_P)...

en: Print document
zh_TW: 列印文件

note: TRANSLATORS: "Vacuum Defs" means "Clean up defs" (so as to remove unused definitions)
en: Vac_uum Defs
zh_TW: 清空 Defs(_U)

en: Remove unused definitions (such as gradients or clipping paths) from the &lt;defs&gt; of the document
zh_TW: 從文件的&lt;defs&gt;中移除未使用的定義(比如漸變或剪裁路徑)

en: Print Previe_w
zh_TW: 列印預覽(_W)

en: Preview document printout
zh_TW: 預覽文件的輸出

en: _Import...
zh_TW: 匯入(_I)...

en: Import a bitmap or SVG image into this document
zh_TW: 將點陣圖或是 SVG 圖像匯入此文件

en: _Export Bitmap...
zh_TW: 匯出點陣圖(_E)...

en: Export this document or a selection as a bitmap image
zh_TW: 把文件或選取區以點陣圖圖像匯出

en: N_ext Window
zh_TW: 下一個視窗(_E)

en: Switch to the next document window
zh_TW: 切換到下一個文件視窗

en: P_revious Window
zh_TW: 上一個視窗(_R)

en: Switch to the previous document window
zh_TW: 切換到上一個文件視窗

en: _Close
zh_TW: 關閉(_C)

en: Close this document window
zh_TW: 關閉此文件

en: _Quit
zh_TW: 離開(_Q)

en: Quit Inkscape
zh_TW: 離開 Inkscape

en: Undo last action
zh_TW: 復原最後一個動作

en: Do again the last undone action
zh_TW: 重複最後未完成作業

en: Cu_t
zh_TW: 剪下(_T)

en: Cut selection to clipboard
zh_TW: 剪下選取區到剪貼簿

en: _Copy
zh_TW: 複製(_C)

en: Copy selection to clipboard
zh_TW: 複製選取區到剪貼簿

en: _Paste
zh_TW: 貼上(_P)

en: Paste objects from clipboard to mouse point, or paste text
zh_TW: 從剪貼簿貼上物件到滑鼠點，或是貼上文字

en: Paste _Style
zh_TW: 貼上樣式(_S)

en: Apply the style of the copied object to selection
zh_TW: 套用已複製物件的風格到選取區

en: Scale selection to match the size of the copied object
zh_TW: 縮放選取區以匹配已複製物件的尺寸

en: Paste _Width
zh_TW: 貼上寬度(_W)

en: Scale selection horizontally to match the width of the copied object
zh_TW: 水平縮放選取區以匹配已複製物件的寬度

en: Paste _Height
zh_TW: 貼上高度(_H)

en: Scale selection vertically to match the height of the copied object
zh_TW: 垂直縮放選取區以匹配已複製物件的高度

en: Paste Size Separately
zh_TW: 分別貼上尺寸

en: Scale each selected object to match the size of the copied object
zh_TW: 縮放每個已選物件以匹配已複製物件的尺寸

en: Paste Width Separately
zh_TW: 分別貼上寬度

en: Scale each selected object horizontally to match the width of the copied object
zh_TW: 水平地縮放每個已選物件以匹配已複製物件的寬度

en: Paste Height Separately
zh_TW: 分別貼上高度

en: Scale each selected object vertically to match the height of the copied object
zh_TW: 垂直地縮放每個已選物件以匹配已複製物件的高度

en: Paste _In Place
zh_TW: 貼在原處(_I)

en: Paste objects from clipboard to the original location
zh_TW: 從剪貼簿貼上物件到原來的位置

en: _Delete
zh_TW: 刪除(_D)

en: Delete selection
zh_TW: 刪除選取

en: Duplic_ate
zh_TW: 再製(_A)

en: Duplicate selected objects
zh_TW: 再製所選物件

en: Create Clo_ne
zh_TW: 建立複本(_N)

en: Create a clone (a copy linked to the original) of selected object
zh_TW: 建立所選物件的一個複本(與原始物件連線的複製品)

en: Unlin_k Clone
zh_TW: 取消複本連結(_K)

en: Cut the selected clone's link to its original, turning it into a standalone object
zh_TW: 中斷已選複本與原始物件的連線，轉化成單獨的物件

en: Select _Original
zh_TW: 選擇原件(_O)

en: Select the object to which the selected clone is linked
zh_TW: 選擇與已選複本連線的物件

note: TRANSLATORS: Convert selection to a rectangle with tiled pattern fill
en: Objects to Patter_n
zh_TW: 物件轉化成圖案(_N)

en: Convert selection to a rectangle with tiled pattern fill
zh_TW: 轉換選取區為矩形圖樣填充

note: TRANSLATORS: Extract objects from a tiled pattern fill
en: Pattern to _Objects
zh_TW: 圖案轉化成物件(_O)

en: Extract objects from a tiled pattern fill
zh_TW: 從圖樣填充中解開物件

en: Clea_r All
zh_TW: 全部清除(_R)

en: Delete all objects from document
zh_TW: 從文件中刪除所有物件

en: Select Al_l
zh_TW: 全選(_L)

en: Select all objects or all nodes
zh_TW: 選擇所有物件或所有複本

en: Select All in All La_yers
zh_TW: 在所有圖層中全選(_Y)

en: Select all objects in all visible and unlocked layers
zh_TW: 在所有可見與未上鎖的圖層中全選

en: In_vert Selection
zh_TW: 反向選取(_V)

en: Invert selection (unselect what is selected and select everything else)
zh_TW: 反向選擇 (取消已選並且全選其餘的)

en: Invert in All Layers
zh_TW: 在所有圖層中反向選取

en: Invert selection in all visible and unlocked layers
zh_TW: 在所有可見與未上鎖的圖層中反向選擇

en: Select Next
zh_TW: 選取下一個

en: Select next object or node
zh_TW: 選取下一個物件或節點

en: Select Previous
zh_TW: 選取前一個

en: Select previous object or node
zh_TW: 選取前一個物件或節點

en: D_eselect
zh_TW: 取消選取(_E)

en: Deselect any selected objects or nodes
zh_TW: 刪除任何所選之物件或節點

note: Selection
en: Raise to _Top
zh_TW: 提升至頂層(_T)

en: Raise selection to top
zh_TW: 提升所選至頂層

en: Lower to _Bottom
zh_TW: 降低到底層(_B)

en: Lower selection to bottom
zh_TW: 降低所選到底層

en: _Raise
zh_TW: 提升(_R)

en: Raise selection one step
zh_TW: 提升所選至上一層

en: _Lower
zh_TW: 降低(_L)

en: Lower selection one step
zh_TW: 降低所選至下一層

en: _Group
zh_TW: 形成群組(_G)

en: Group selected objects
zh_TW: 結合選擇的物件

en: Ungroup selected groups
zh_TW: 解開選擇的群組

en: _Put on Path
zh_TW: 置於路徑(_P)

en: _Remove from Path
zh_TW: 從路徑移除(_R)

en: Remove Manual _Kerns
zh_TW: 手動移除突出物(_K)

note: TRANSLATORS: "glyph": An image used in the visual representation of characters; roughly speaking, how a character looks. A font is a set of glyphs.
en: Remove all manual kerns and glyph rotations from a text object
zh_TW: 從文字物件上移除所有手動突出物與字形

en: _Union
zh_TW: 合併(_U)

en: Create union of selected paths
zh_TW: 建立所選路徑的並集

en: _Intersection
zh_TW: 交集(_I)

en: Create intersection of selected paths
zh_TW: 建立所選路徑的交集

en: _Difference
zh_TW: 割去(_D)

en: Create difference of selected paths (bottom minus top)
zh_TW: 建立所選路徑的差集(底部減去頂部)

en: E_xclusion
zh_TW: 排除(_X)

en: Create exclusive OR of selected paths (those parts that belong to only one path)
zh_TW: 建立絕對的或作業 (這些只屬於一個路徑)

en: Di_vision
zh_TW: 分開(_V)

en: Cut the bottom path into pieces
zh_TW: 把底部路徑分割成片

note: TRANSLATORS: "to cut a path" is not the same as "to break a path apart" - see the Advanced tutorial for more info
en: Cut _Path
zh_TW: 剪下(_P)

en: Cut the bottom path's stroke into pieces, removing fill
zh_TW: 把底部路徑的描邊分割成片，去除填色

note: TRANSLATORS: "outset": expand a shape by offsetting the object's path, i.e. by displacing it perpendicular to the path in each point. See also the Advanced Tutorial for explanation.
en: Outs_et
zh_TW: 外貼(_E)

en: Outset selected paths
zh_TW: 外貼於選取的路徑

en: O_utset Path by 1 px
zh_TW: 外貼路徑為 1px (_U)

en: Outset selected paths by 1 px
zh_TW: 選取的路徑外貼 1px

en: O_utset Path by 10 px
zh_TW: 路徑外貼 10px (_U)

en: Outset selected paths by 10 px
zh_TW: 選取的路徑外貼 10px

note: TRANSLATORS: "inset": contract a shape by offsetting the object's path, i.e. by displacing it perpendicular to the path in each point. See also the Advanced Tutorial for explanation.
en: I_nset
zh_TW: 內插(_N)

en: Inset selected paths
zh_TW: 內插於選取的路徑

en: I_nset Path by 1 px
zh_TW: 內插路徑為 1 px(_N)

en: Inset selected paths by 1 px
zh_TW: 選取的路徑內插 1px

en: I_nset Path by 10 px
zh_TW: 內插路徑為 10 px(_N)

en: Inset selected paths by 10 px
zh_TW: 選取的路徑內插 10px

en: D_ynamic Offset
zh_TW: 動態偏移(_Y)

en: Create a dynamic offset object
zh_TW: 建立一個動態偏移物件

en: _Linked Offset
zh_TW: 連結偏移(_L)

en: Create a dynamic offset object linked to the original path
zh_TW: 建立連結到原始路徑的動態偏移物件

en: _Stroke to Path
zh_TW: 邊框轉成路徑(_S)

en: Convert selected object's stroke to paths
zh_TW: 把已選物件的描邊轉化成路徑

en: Si_mplify
zh_TW: 精簡(_M)

en: Simplify selected paths (remove extra nodes)
zh_TW: 簡化已選路徑(移除額外的節點)

en: _Reverse
zh_TW: 反轉(_R)

en: Reverse the direction of selected paths (useful for flipping markers)
zh_TW: 已選路徑反向(對翻轉標記有用)

note: TRANSLATORS: "to trace" means "to convert a bitmap to vector graphics" (to vectorize)
en: _Trace Bitmap...
zh_TW: 提取點陣圖輪廓(_T)…

en: Create one or more paths from a bitmap by tracing it
zh_TW: 透過提取點陣圖輪廓建立一個或多個路徑

en: _Make a Bitmap Copy
zh_TW: 製作點陣圖複製品(_M)

en: Export selection to a bitmap and insert it into document
zh_TW: 匯出所選為點陣圖並將它插入文件

en: _Combine
zh_TW: 結合(_C)

en: Combine several paths into one
zh_TW: 結合數個路徑成一個

note: TRANSLATORS: "to cut a path" is not the same as "to break a path apart" - see the Advanced tutorial for more info
en: Break _Apart
zh_TW: 拆開(_A)

en: Break selected paths into subpaths
zh_TW: 中斷選擇的路徑成為子路徑

note: Layer
en: _Add Layer...
zh_TW: 增加圖層(_A)...

en: Create a new layer
zh_TW: 建立新圖層

en: Re_name Layer...
zh_TW: 重新命名圖層(_N)...

en: Rename the current layer
zh_TW: 重新命名目前圖層

en: Switch to Layer Abov_e
zh_TW: 切換到上方圖層(_E)

en: Switch to the layer above the current
zh_TW: 切換至所在上方的圖層

en: Switch to Layer Belo_w
zh_TW: 切換到下方圖層(_W)

en: Switch to the layer below the current
zh_TW: 切換至所在下方的圖層

en: Move Selection to Layer Abo_ve
zh_TW: 移動所選到上方圖層(_V)

en: Move selection to the layer above the current
zh_TW: 移動所選到目前上方的圖層

en: Move Selection to Layer Bel_ow
zh_TW: 移動所選到下方圖層(_O)

en: Move selection to the layer below the current
zh_TW: 移動所選到目前下方的圖層

en: Layer to _Top
zh_TW: 圖層移到頂端(_T)

en: Raise the current layer to the top
zh_TW: 提升目前圖層到頂端

en: Layer to _Bottom
zh_TW: 圖層移到底部(_B)

en: Lower the current layer to the bottom
zh_TW: 降低目前圖層到底部

en: _Raise Layer
zh_TW: 提升圖層(_R)

en: Raise the current layer
zh_TW: 提升目前圖層

en: _Lower Layer
zh_TW: 降低圖層(_L)

en: Lower the current layer
zh_TW: 降低目前圖層

en: _Delete Current Layer
zh_TW: 刪除目前圖層(_D)

en: Delete the current layer
zh_TW: 刪除目前圖層

note: Object
en: Rotate _90&#176; CW
zh_TW: 順時針旋轉 _90&#176;

en: Rotate 9_0&#176; CCW
zh_TW: 逆時針旋轉 9_0&#176;

en: Remove _Transformations
zh_TW: 移除變形(_T)

en: Remove transformations from object
zh_TW: 移除物件上的變形效果

en: _Object to Path
zh_TW: 物件轉成路徑(_O)

en: Convert selected object to path
zh_TW: 把已選物件轉化成路徑

en: _Flow into Frame
zh_TW: 流動轉為訊框(_F)

en: Put text into a frame (path or shape), creating a flowed text linked to the frame object
zh_TW: 把文字放到框架(路徑或形狀)裡，建立與框架物件連線的浮動文字

en: _Unflow
zh_TW: 不流動文字(_U)

en: Remove text from frame (creates a single-line text object)
zh_TW: 從訊框中移除文字 (建立單列文字物件)

en: _Convert to Text
zh_TW: 轉換成文字(_C)

en: Convert flowed text to regular text object (preserves appearance)
zh_TW: 把浮動文字轉化成一般文字物件(保持外觀)

en: Flip _Horizontal
zh_TW: 水平翻轉(_H)

en: Flip selected objects horizontally
zh_TW: 水平地翻轉已選物件

en: Flip _Vertical
zh_TW: 垂直翻轉(_V)

en: Flip selected objects vertically
zh_TW: 垂直地翻轉已選物件

en: Apply mask to selection (using the topmost object as mask)
zh_TW: 套用遮罩到選取區(使用最頂層物件做為遮罩)

en: _Release
zh_TW: 釋放(_R)

en: Remove mask from selection
zh_TW: 從選取區中移除遮罩

en: Apply clipping path to selection (using the topmost object as clipping path)
zh_TW: 套用剪裁路徑到選取區(使用最頂層物件做為剪裁路徑)

en: Remove clipping path from selection
zh_TW: 從選取區中移除剪裁路徑

note: Tools
en: Select
zh_TW: 選擇

en: Select and transform objects
zh_TW: 選擇及轉變物件

en: Node Edit
zh_TW: 編輯節點

en: Create rectangles and squares
zh_TW: 建立矩形與正方形

en: Create circles, ellipses, and arcs
zh_TW: 建立圓形﹑橢圓形與弧形

en: Create stars and polygons
zh_TW: 建立星形與多邊形

en: Create spirals
zh_TW: 建立螺旋形

en: Draw freehand lines
zh_TW: 繪製徒手畫線條

en: Draw Bezier curves and straight lines
zh_TW: 繪製貝茲曲線及直線

en: Create and edit text objects
zh_TW: 建立並編輯文字物件

en: Create and edit gradients
zh_TW: 建立並編輯漸層

en: Zoom in or out
zh_TW: 放大或縮小

note: Tool prefs
en: Selector Preferences
zh_TW: 選取器設定

en: Open Preferences for the Selector tool
zh_TW: 開啟選取工具的偏好設定

en: Node Tool Preferences
zh_TW: 節點工具設定

en: Open Preferences for the Node tool
zh_TW: 開啟節點工具的偏好設定

en: Rectangle Preferences
zh_TW: 矩形設定

en: Open Preferences for the Rectangle tool
zh_TW: 開啟矩形工具的偏好設定

en: Ellipse Preferences
zh_TW: 橢圓形設定

en: Open Preferences for the Ellipse tool
zh_TW: 開啟橢圓形工具的偏好設定

en: Star Preferences
zh_TW: 星形設定

en: Open Preferences for the Star tool
zh_TW: 開啟星形工具的偏好設定

en: Spiral Preferences
zh_TW: 螺旋形設定

en: Open Preferences for the Spiral tool
zh_TW: 開啟螺旋形工具的偏好設定

en: Pencil Preferences
zh_TW: 鉛筆設定

en: Open Preferences for the Pencil tool
zh_TW: 開啟鉛筆工具的偏好設定

en: Pen Preferences
zh_TW: 畫筆設定

en: Open Preferences for the Pen tool
zh_TW: 開啟畫筆工具的偏好設定

en: Calligraphic Preferences
zh_TW: 美工設定

en: Open Preferences for the Calligraphy tool
zh_TW: 開啟美工工具的偏好設定

en: Text Preferences
zh_TW: 文字設定

en: Open Preferences for the Text tool
zh_TW: 開啟文字工具的偏好設定

en: Gradient Preferences
zh_TW: 漸層設定

en: Open Preferences for the Gradient tool
zh_TW: 開啟漸層工具的偏好設定

en: Zoom Preferences
zh_TW: 縮放設定

en: Open Preferences for the Zoom tool
zh_TW: 開啟縮放工具的偏好設定

en: Dropper Preferences
zh_TW: 取色設定

en: Open Preferences for the Dropper tool
zh_TW: 開啟取色工具的偏好設定

en: Connector Preferences
zh_TW: 連線設定

en: Open Preferences for the Connector tool
zh_TW: 開啟連線工具的偏好設定

note: Zoom/View
en: Zoom In
zh_TW: 放大

en: Zoom in
zh_TW: 放大

en: Zoom Out
zh_TW: 縮小

en: Zoom out
zh_TW: 縮小

en: _Rulers
zh_TW: 尺標(_R)

en: Show or hide the canvas rulers
zh_TW: 顯示或隱藏畫布尺標

en: Scroll_bars
zh_TW: 捲軸(_B)

en: Show or hide the canvas scrollbars
zh_TW: 顯示或隱藏畫布捲軸

en: _Grid
zh_TW: 格線(_G)

en: Show or hide the grid
zh_TW: 顯示或隱藏網格

en: G_uides
zh_TW: 參考(_U)

en: Show or hide guides (drag from a ruler to create a guide)
zh_TW: 顯示或隱藏參考線(從尺子拖動建立尺規)

en: Nex_t Zoom
zh_TW: 下一個縮放(_T)

en: Next zoom (from the history of zooms)
zh_TW: 下一個縮放(從縮放紀錄中)

en: Pre_vious Zoom
zh_TW: 上一個縮放(_V)

en: Previous zoom (from the history of zooms)
zh_TW: 上一個縮放(從縮放紀錄中)

en: Zoom 1:_1
zh_TW: 1:_1 縮放

en: Zoom to 1:1
zh_TW: 縮放到 1:1

en: Zoom 1:_2
zh_TW: 1:_2 縮放

en: Zoom to 1:2
zh_TW: 縮放到 1:2

en: _Zoom 2:1
zh_TW: 2:1 縮放(_Z)

en: Zoom to 2:1
zh_TW: 縮放到 2:1

en: _Fullscreen
zh_TW: 全螢幕(_F)

en: Stretch this document window to full screen
zh_TW: 將文件展開為全螢幕

en: Duplic_ate Window
zh_TW: 再製視窗(_A)

en: Open a new window with the same document
zh_TW: 開啟同一文件於新視窗

en: _New View Preview
zh_TW: 新檢視預覽(_N)

en: New View Preview
zh_TW: 新檢視預覽

note: "view_new_preview"
en: _Normal
zh_TW: 正常(_N)

en: Switch to normal display mode
zh_TW: 切換到正常顯示模式

en: _Outline
zh_TW: 輪廓(_O)

en: Switch to outline (wireframe) display mode
zh_TW: 切換到輪廓(線框)顯示模式

en: _Toggle
zh_TW: 切換(_T)

en: Toggle between normal and outline display modes
zh_TW: 在一般和描邊顯示模式之間切換

en: Ico_n Preview...
zh_TW: 圖示預覽(_N)…

en: Open a window to preview objects at different icon resolutions
zh_TW: 以不同的圖示解析度開啟視窗預覽物件

en: Zoom to fit page in window
zh_TW: 縮放整頁到整個視窗

en: Page _Width
zh_TW: 最適頁寬(_W)

en: Zoom to fit page width in window
zh_TW: 縮放頁寬到整個視窗

en: Zoom to fit drawing in window
zh_TW: 縮放繪圖部份到整個視窗

en: Zoom to fit selection in window
zh_TW: 縮放選擇區到整個視窗

note: Dialogs
en: In_kscape Preferences...
zh_TW: In_kscape 設定...

en: Edit global Inkscape preferences
zh_TW: 編輯全域 Inkscape 參數

en: _Document Properties...
zh_TW: 文件屬性(_D)…

en: Edit properties of this document (to be saved with the document)
zh_TW: 編輯文件的屬性(同文件一起儲存)

en: Document _Metadata...
zh_TW: 文件後設資料(_M)…

en: Edit document metadata (to be saved with the document)
zh_TW: 編輯文件後設資料(同文件一起儲存)

en: _Fill and Stroke...
zh_TW: 填充與邊框(_F)...

note: TRANSLATORS: "Swatches" means: color samples
en: S_watches...
zh_TW: 顏色樣本(_W)...

en: Select colors from a swatches palette
zh_TW: 從樣本調色盤中選擇色彩

en: Transfor_m...
zh_TW: 變形(_M)...

en: Precisely control objects' transformations
zh_TW: 精確控制物件的變換

en: _Align and Distribute...
zh_TW: 對齊與分佈(_A)...

en: Align and distribute objects
zh_TW: 對齊散開物件

en: Undo _History...
zh_TW: 復原歷史(_H)…

en: Undo History
zh_TW: 復原歷史

en: _Text and Font...
zh_TW: 文字與字型(_T)...

en: View and select font family, font size and other text properties
zh_TW: 顯示選擇字型名稱，字型大小和其他字型屬性

en: _XML Editor...
zh_TW: _XML 編輯器...

en: View and edit the XML tree of the document
zh_TW: 顯示並編輯文件的 XML 樹

en: _Find...
zh_TW: 尋找(_F)...

en: Find objects in document
zh_TW: 搜尋頁面中物件

en: _Messages...
zh_TW: 訊息(_M)...

en: View debug messages
zh_TW: 檢視偵錯訊息

en: S_cripts...
zh_TW: 命令稿(_C)...

en: Run scripts
zh_TW: 執行命令稿

en: Show/Hide D_ialogs
zh_TW: 顯示/隱藏對話框(_I)

en: Show or hide all open dialogs
zh_TW: 顯示或隱藏所有開啟的對話方塊

en: Create Tiled Clones...
zh_TW: 建立平舖複本…

en: Create multiple clones of selected object, arranging them into a pattern or scattering
zh_TW: 建立選擇物件的多個複本，按照圖案或是分散的排列

en: _Object Properties...
zh_TW: 物件屬性(_O)...

en: Edit the ID, locked and visible status, and other object properties
zh_TW: 編輯物件的 ID，鎖定和可見狀態，以及其他屬性

en: _Instant Messaging...
zh_TW: 即時傳訊(_I)…

en: Jabber Instant Messaging Client
zh_TW: Jabber 即時傳訊客戶端

en: _Input Devices...
zh_TW: 輸入裝置(_I)...

en: Configure extended input devices, such as a graphics tablet
zh_TW: 配置擴充輸入裝置，例如繪圖板

en: _Extensions...
zh_TW: 擴充(_E)…

en: Query information about extensions
zh_TW: 查詢擴充的資訊

en: Layer_s...
zh_TW: 圖層(_S)…

en: View Layers
zh_TW: 顯示圖層

note: Help
en: About E_xtensions
zh_TW: 關於擴充(_X)

en: Information on Inkscape extensions
zh_TW: Inkscape 擴充資訊

en: About _Memory
zh_TW: 關於記憶體(_M)

en: Memory usage information
zh_TW: 記憶體使用資訊

en: _About Inkscape
zh_TW: 關於 Inkscape(_A)

en: Inkscape version, authors, license
zh_TW: Inscape 版本、作者、使用授權

note: "help_about" new HelpVerb(SP_VERB_SHOW_LICENSE, "ShowLicense", N_("_License"), N_("Distribution terms"), /*"show_license"*/"inkscape_options"), Tutorials
en: Inkscape: _Basic
zh_TW: Inkscape: 基礎(_B)

en: Getting started with Inkscape
zh_TW: 開始使用 Inkscape

note: "tutorial_basic"
en: Inkscape: _Shapes
zh_TW: Inkscape: 中級(_S)

en: Using shape tools to create and edit shapes
zh_TW: 正在使用形狀工具來建立並編輯形狀

en: Inkscape: _Advanced
zh_TW: Inkscape: 進階(_A)

en: Advanced Inkscape topics
zh_TW: Inkscape 進階主題

note: "tutorial_advanced" TRANSLATORS: "to trace" means "to convert a bitmap to vector graphics" (to vectorize)
en: Inkscape: T_racing
zh_TW: Inkscape: 勾描(_R)

en: Using bitmap tracing
zh_TW: 使用點陣圖勾描

note: "tutorial_tracing"
en: Inkscape: _Calligraphy
zh_TW: Inkscape: 美工(_C)

en: Using the Calligraphy pen tool
zh_TW: 使用美工筆工具

en: _Elements of Design
zh_TW: 設計的元件(_E)

en: Principles of design in the tutorial form
zh_TW: 教學表單中的設計原則

note: "tutorial_design"
en: _Tips and Tricks
zh_TW: 秘訣(_T)

en: Miscellaneous tips and tricks
zh_TW: 各種技巧與秘訣

note: "tutorial_tips" Effect
en: Previous Effect
zh_TW: 上一個效果

en: Repeat the last effect with the same settings
zh_TW: 以同樣的設定重覆上次的效果

en: Previous Effect Settings...
zh_TW: 上一個效果設定...

en: Repeat the last effect with new settings
zh_TW: 以新的設定重覆上次的效果

note: Fit Page
en: Fit Page to Selection
zh_TW: 調整頁面以符合選擇

en: Fit the page to the current selection
zh_TW: 調整頁面以符合目前的選擇

en: Fit Page to Drawing
zh_TW: 調整頁面以符合繪圖

en: Fit the page to the drawing
zh_TW: 調整頁面以符合繪圖

en: Fit Page to Selection or Drawing
zh_TW: 調整頁面以符合選擇或繪圖

en: Fit the page to the current selection or the drawing if there is no selection
zh_TW: 如果沒有其他選擇，調整頁面以符合目前的選擇或繪圖

en: Dash pattern
zh_TW: 線段圖樣

en: Pattern offset
zh_TW: 圖樣偏移

en: %s: %d (outline) - Inkscape
zh_TW: %s：%d (描邊) - Inkscape

en: %s (outline) - Inkscape
zh_TW: %s (描邊) - Inkscape

note: Family frame
en: Font family
zh_TW: 字型

note: Style frame
en: Style
zh_TW: 樣式

en: Font size:
zh_TW: 字型大小:

en: Edit...
zh_TW: 編輯...

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/pservers.html#LinearGradientSpreadMethodAttribute
en: Whether to fill with flat color beyond the ends of the gradient vector (spreadMethod="pad"), or repeat the gradient in the same direction (spreadMethod="repeat"), or repeat the gradient in alternating opposite directions (spreadMethod="reflect")
zh_TW: 是否在漸層向量的末端之後要以單色來填充(spreadMethod="pad")，或是以相同方向重覆漸層(spreadMethod="repeat")，或是以另外的相反方向重覆漸層(spreadMethod="reflect")

en: reflected
zh_TW: 反射

en: direct
zh_TW: 直接

en: Repeat:
zh_TW: 重複:

en: Assign gradient to object
zh_TW: 指派漸層到物件

en: <small>No gradients</small>
zh_TW: <small>無漸層</small>

en: <small>Nothing selected</small>
zh_TW: <small>未選取任何物件</small>

en: <small>No gradients in selection</small>
zh_TW: <small>選取區中沒有漸層</small>

en: <small>Multiple gradients</small>
zh_TW: <small>多重漸層</small>

en: Edit the stops of the gradient
zh_TW: 編輯漸層的停止點

en: <b>New:</b>
zh_TW: <b>新增:</b>

en: Create linear gradient
zh_TW: 建立線性漸層

en: Create radial (elliptic or circular) gradient
zh_TW: 建立放射狀(橢圓或圓形)漸層

en: on
zh_TW: 開

en: Create gradient in the fill
zh_TW: 在填充中建立漸層

en: Create gradient in the stroke
zh_TW: 在邊框中建立漸層

note: FIXME: implement averaging of all parameters for multiple selected gtk_label_set_markup(GTK_LABEL(l), _("<b>Average:</b>"));
en: <b>Change:</b>
zh_TW: <b>改變:</b>

en: No gradients in document
zh_TW: 文件中無漸層

en: No gradient selected
zh_TW: 未選擇漸層

en: No stops in gradient
zh_TW: 漸層中無停止點

en: Change gradient stop offset
zh_TW: 變更漸層停止點偏移

note: TRANSLATORS: "Stop" means: a "phase" of a gradient
en: Add stop
zh_TW: 新增停止點

en: Add another control stop to gradient
zh_TW: 新增漸層中的控制停止點

en: Delete stop
zh_TW: 刪除停止點

en: Delete current control stop from gradient
zh_TW: 從漸層刪除現有控制停止點

note: Label
en: Offset:
zh_TW: 偏移:

note: TRANSLATORS: "Stop" means: a "phase" of a gradient
en: Stop Color
zh_TW: 停止顏色

en: Gradient editor
zh_TW: 漸層編輯器

en: Change gradient stop color
zh_TW: 變更漸層停止點顏色

en: Toggle current layer visibility
zh_TW: 切換目前圖層可見性

en: Lock or unlock current layer
zh_TW: 鎖住或解鎖目前圖層

en: Current layer
zh_TW: 目前圖層

en: (root)
zh_TW: (根)

en: No paint
zh_TW: 無色

en: Flat color
zh_TW: 單色

en: Linear gradient
zh_TW: 線性漸層

en: Radial gradient
zh_TW: 放射狀漸層

en: Unset paint (make it undefined so it can be inherited)
zh_TW: 解除著色設定 (讓它未被定義，因而能夠繼承)

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/painting.html#FillRuleProperty
en: Any path self-intersections or subpaths create holes in the fill (fill-rule: evenodd)
zh_TW: 任何路徑自我交叉或是具有子路徑，會在填充區形成空洞 (填充規則: evenodd)

note: TRANSLATORS: for info, see http://www.w3.org/TR/2000/CR-SVG-20000802/painting.html#FillRuleProperty
en: Fill is solid unless a subpath is counterdirectional (fill-rule: nonzero)
zh_TW: 填充為實心，除非某個子路徑方向相反 (填充規則: nonzero)

en: No objects
zh_TW: 無物件

en: Multiple styles
zh_TW: 多種樣式

en: Paint is undefined
zh_TW: 顏色未定義

en: Transform by toolbar
zh_TW: 藉由工具列變換

en: Now <b>stroke width</b> is <b>scaled</b> when objects are scaled.
zh_TW: 物件縮放時<b>描邊寬度</b>也會跟著<b>縮放</b>。

en: Now <b>stroke width</b> is <b>not scaled</b> when objects are scaled.
zh_TW: 物件縮放<b>描邊寬度</b>也會跟著<b>不會縮放</b>。

en: Now <b>rounded rectangle corners</b> are <b>scaled</b> when rectangles are scaled.
zh_TW: 矩形縮放時<b>圓角矩形的圓角</b>也會跟著<b>縮放</b>。

en: Now <b>rounded rectangle corners</b> are <b>not scaled</b> when rectangles are scaled.
zh_TW: 矩形縮放時<b>圓角矩形的圓角</b>也會跟著<b>不會縮放</b>。

en: Now <b>gradients</b> are <b>transformed</b> along with their objects when those are transformed (moved, scaled, rotated, or skewed).
zh_TW: <b>漸變</b>隨著物件(移動，縮放，旋轉或歪斜)<b>變換</b>。

en: Now <b>gradients</b> remain <b>fixed</b> when objects are transformed (moved, scaled, rotated, or skewed).
zh_TW: <b>漸變</b>不會隨著物件(移動，縮放，旋轉或歪斜)<b>變換</b>。

en: Now <b>patterns</b> are <b>transformed</b> along with their objects when those are transformed (moved, scaled, rotated, or skewed).
zh_TW: <b>圖案</b>隨著物件(移動，縮放，旋轉或歪斜)<b>變換</b>。

en: Now <b>patterns</b> remain <b>fixed</b> when objects are transformed (moved, scaled, rotated, or skewed).
zh_TW: <b>圖案</b>不會隨著物件(移動，縮放，旋轉或歪斜)<b>變換</b>。

en: Horizontal coordinate of selection
zh_TW: 選取區的水平座標

en: Vertical coordinate of selection
zh_TW: 選取區的垂直座標

en: Width of selection
zh_TW: 選取區寬度

en: When locked, change both width and height by the same proportion
zh_TW: 鎖定時，按照相同比例變更寬度和高度

en: Height of selection
zh_TW: 選取區高度

en: Cyan
zh_TW: 青

en: Magenta
zh_TW: 洋紅

en: Yellow
zh_TW: 黃

en: Alpha (opacity)
zh_TW: Alpha(濁度)

en: System
zh_TW: 系統

en: Hexadecimal RGBA value of the color
zh_TW: 顏色的十六進位 RGBA 值

en: Unnamed
zh_TW: 未命名

en: Wheel
zh_TW: 色環

en: Attribute
zh_TW: 屬性

en: Value
zh_TW: 值

en: Type text in a text node
zh_TW: 在文字節點中輸入文字

en: Insert new nodes into selected segments
zh_TW: 插入新節點到選取的扇形

en: Delete selected nodes
zh_TW: 刪除所選節點

en: Join selected endnodes
zh_TW: 加入已選終結點

en: Join selected endnodes with a new segment
zh_TW: 加入已選終結點附帶新線段

en: Split path between two non-endpoint nodes
zh_TW: 在兩個非終點的節點之間拆開路徑

en: Break path at selected nodes
zh_TW: 切斷選取節點之路徑

en: Make selected nodes corner
zh_TW: 將所選節點尖角化

en: Make selected nodes smooth
zh_TW: 將所選節點平滑化

en: Make selected nodes symmetric
zh_TW: 將所選節點對稱化

en: Make selected segments lines
zh_TW: 將所選扇形線條化

en: Make selected segments curves
zh_TW: 將所選扇形曲線化

en: Show the Bezier handles of selected nodes
zh_TW: 顯示已選節點的貝氏控柄

en: Star: Change number of corners
zh_TW: 星型：變更轉角數量

en: Star: Change spoke ratio
zh_TW: 星型：變更輪輻比率

en: Make polygon
zh_TW: 製作多邊形

en: Make star
zh_TW: 製作星型

en: Star: Change rounding
zh_TW: 星型：變更圓角化

en: Star: Change randomization
zh_TW: 星型：變更隨機性

en: Regular polygon (with one handle) instead of a star
zh_TW: 一般的多邊形 (具一個控柄) 而不是星形

en: Corners:
zh_TW: 尖角數:

en: Number of corners of a polygon or star
zh_TW: 多邊形或星形的尖角數

en: Spoke ratio:
zh_TW: 輪廓比例:

note: TRANSLATORS: Tip radius of a star is the distance from the center to the farthest handle. Base radius is the same for the closest handle.
en: Base radius to tip radius ratio
zh_TW: 基礎半徑對尖端半徑比率

en: Rounded:
zh_TW: 圓角化:

en: How much rounded are the corners (0 for sharp)
zh_TW: 尖角變圓的程度(0 表示 尖銳)

en: Randomized:
zh_TW: 隨機:

en: Scatter randomly the corners and angles
zh_TW: 隨機散播尖角與角度

en: Defaults
zh_TW: 預設

en: Reset shape parameters to defaults (use Inkscape Preferences > Tools to change defaults)
zh_TW: 重置形狀參數為預設值 (利用 Inkscape 偏好設定 > 工具來改變預設值)

en: Change rectangle
zh_TW: 變更矩形

en: W:
zh_TW: 寬:

en: Width of rectangle
zh_TW: 矩形寬度

en: Height of rectangle
zh_TW: 矩形高度

en: Horizontal radius of rounded corners
zh_TW: 圓角的水平半徑

en: Vertical radius of rounded corners
zh_TW: 圓角的垂直半徑

en: Not rounded
zh_TW: 無圓角

en: Make corners sharp
zh_TW: 做出銳角

en: Change spiral
zh_TW: 變更螺旋形

en: Turns:
zh_TW: 圈數:

en: Number of revolutions
zh_TW: 循環數

en: Divergence:
zh_TW: 分散度:

en: How much denser/sparser are outer revolutions; 1 = uniform
zh_TW: 有多少緊密者/稀疏者位於循環之外；1 = 一致的

en: Inner radius:
zh_TW: 內部半徑:

en: Radius of the innermost revolution (relative to the spiral size)
zh_TW: 最內部循環的半徑 (相對於螺旋形大小)

en: Pressure
zh_TW: 壓力

en: The width of the calligraphic pen (relative to the visible canvas area)
zh_TW: 美工筆的寬度(相對於可見畫布區域)

en: Thinning:
zh_TW: 細化:

en: How much velocity thins the stroke (> 0 makes fast strokes thinner, < 0 makes them broader, 0 makes width independent of velocity)
zh_TW: 邊框細化的速率快慢 (> 0 致使邊框快速細化，< 0 致使它們比較寬闊，0 致使寬度獨立於速率)

en: Angle:
zh_TW: 角度:

en: The angle of the pen's nib (in degrees; 0 = horizontal; has no effect if fixation = 0)
zh_TW: 筆尖的角度 (以角度來表示；0 = 水平; 如果 固定=0 就沒有任何效用)

en: Fixation:
zh_TW: 固定:

en: Angle behavior (0 = nib always perpendicular to stroke direction, 1 = fixed angle)
zh_TW: 角度行為 (0=尖端自動垂直於筆畫方向，1=固定的角度)

en: Caps:
zh_TW: 線端:

en: Increase to make caps at the ends of strokes protrude more (0 = no caps, 1 = round caps)
zh_TW: 增加它好讓筆畫結束的線端更加突出 (0=無線端，1=圓角化線端)

en: Tremor:
zh_TW: 抖動：

en: Increase to make strokes rugged and trembling
zh_TW: 增加它好讓筆畫粗糙與抖動

en: Wiggle:
zh_TW: 擺動：

en: Increase to make the pen waver and wiggle
zh_TW: 增加它好讓畫筆波動和擺動

en: Mass:
zh_TW: 質量:

en: Increase to make the pen drag behind, as if slowed by inertia
zh_TW: 增加它好讓畫筆拖延，如同被慣性減慢

en: Use the pressure of the input device to alter the width of the pen
zh_TW: 利用輸入裝置的壓力來變更筆的寬度

en: Tilt
zh_TW: 斜度

en: Use the tilt of the input device to alter the angle of the pen's nib
zh_TW: 利用輸入裝置的傾斜來變更筆尖的角度

en: Arc: Change start/end
zh_TW: 弧：變更開始/結束

en: Arc: Change open/closed
zh_TW: 弧：變更開啟/關閉

en: Start:
zh_TW: 開始:

en: The angle (in degrees) from the horizontal to the arc's start point
zh_TW: 從水平線到圓弧起點的角度 (以角度為單位)

en: End:
zh_TW: 結束:

en: The angle (in degrees) from the horizontal to the arc's end point
zh_TW: 從水平線到圓弧終點的角度 (以角度為單位)

en: Make whole
zh_TW: 完整圖形

en: Make the shape a whole ellipse, not arc or segment
zh_TW: 將該形狀形成完整的橢圓，而非弧形或扇形

en: Pick alpha
zh_TW: 揀取 alpha 值

en: Pick both the color and the alpha (transparency) under cursor; otherwise, pick only the visible color premultiplied by alpha
zh_TW: 揀取游標之下的顏色和 alpha(透明度)兩者；否則，只有揀取經過 alpha 前置乘積的可見顏色

en: Set alpha
zh_TW: 設定 alpha

en: If alpha was picked, assign it to selection as fill or stroke transparency
zh_TW: 如果 alpha 已被揀取，就指派它到選擇填充或筆畫透明度

en: Text: Change font family
zh_TW: 文字：變更字族

en: Text: Change alignment
zh_TW: 文字：變更對齊

en: Text: Change font style
zh_TW: 文字：變更字型樣式

en: Text: Change orientation
zh_TW: 文字：變更方向

en: Text: Change font size
zh_TW: 文字：變更字型尺寸

en: This font is currently not installed on your system. Inkscape will use the default font instead.
zh_TW: 目前您的系統還沒有安裝此字型。Inkscape 使用預設的字型代替。

en: Align left
zh_TW: 靠左對齊

en: Align right
zh_TW: 靠右對齊

en: Justify
zh_TW: 左靠右對齊

en: Bold
zh_TW: 粗體

en: Italic
zh_TW: 斜體

en: Change connector spacing
zh_TW: 變更連接器間隔

en: Spacing:
zh_TW: 空隙：

en: The amount of space left around objects by auto-routing connectors
zh_TW: 自動路由連線器周圍的空隙

en: Length:
zh_TW: 長度：

en: Ideal length for connectors when layout is applied
zh_TW: 當套用版面配置時用於連接器的理想長度

en: Make connectors with end-markers (arrows) point downwards
zh_TW: 以指向下方的終端符號(箭頭)來製作連接器

en: Do not allow overlapping shapes
zh_TW: 不允許重疊的形狀

note: Local Variables: mode:c++ c-file-style:"stroustrup" c-file-offsets:((innamespace . 0)(inline-open . 0)(case-label . +)) indent-tabs-mode:nil fill-column:99 End: vim: filetype=cpp:expandtab:shiftwidth=4:tabstop=8:softtabstop=4 :
en: Add Nodes
zh_TW: 加入節點

en: Modify Path
zh_TW: 修改路徑

en: AI 8.0 Input
zh_TW: AI 8.0 輸入

en: Open files saved with Adobe Illustrator 8.0 or older
zh_TW: 開啟以 Adobe Illustrator 8.0 或更舊版本所儲存的檔案

en: AI 8.0 Output
zh_TW: AI 8.0 輸出

en: Write Adobe Illustrator 8.0 (Postscript-based)
zh_TW: 寫入 Adobe Illustrator 8.0 格式(基於 Postscript)

en: AI SVG Input
zh_TW: AI SVG 輸入

en: Adobe Illustrator SVG (*.ai.svg)
zh_TW: Adobe 插圖 SVG (*.ai.svg)

en: Cleans the cruft out of Adobe Illustrator SVGs before opening
zh_TW: 開啟之前清除 Adobe 插圖中 SVG 的東西

en: Brighter
zh_TW: 增亮

en: Blue Function
zh_TW: 藍色函數

en: Custom...
zh_TW: 自訂…

en: Green Function
zh_TW: 綠色函數

en: Red Function
zh_TW: 紅色函數

en: Darker
zh_TW: 減暗

en: Desaturate
zh_TW: 去飽和

en: Grayscale
zh_TW: 灰階

en: Less Hue
zh_TW: 較少色調

en: Less Light
zh_TW: 較少亮度

en: Less Saturation
zh_TW: 較少飽和度

en: More Hue
zh_TW: 更多色調

en: More Light
zh_TW: 更多亮度

en: More Saturation
zh_TW: 更多飽和度

en: Negative
zh_TW: 負值

en: Remove Blue
zh_TW: 移除藍色

en: Remove Green
zh_TW: 移除綠色

en: Remove Red
zh_TW: 移除紅色

en: RGB Barrel
zh_TW: RGB 大桶

en: A diagram created with the program Dia
zh_TW: 使用 Dia 程式建立的圖表

en: Dia Diagram (*.dia)
zh_TW: Dia 圖表 (*.dia)

en: Dia Input
zh_TW: Dia 輸入

en: The dia2svg.sh script should be installed with your Inkscape distribution.  If you do not have it, there is likely to be something wrong with your Inkscape installation.
zh_TW: Inkscape 發行中的命令稿 dia2svg.sh 應該已經安裝。如果沒有，那麼 Inkscape 安裝有問題。

en: Dot size
zh_TW: 點大小

en: Font size
zh_TW: 字型大小

en: Number Nodes
zh_TW: 節點數

en: Visualize Path
zh_TW: 可視化路徑

en: AutoCAD DXF (*.dxf)
zh_TW: AutoCAD DXF (*.dfx)

en: DXF Input
zh_TW: DXF 輸入

en: Import AutoCAD's Document Exchange Format
zh_TW: 匯入 AutoCAD 的文件交換格式檔案

en: dxf2svg may come with Inkscape, but is also at http://dxf-svg-convert.sourceforge.net/
zh_TW: dxf2svg 可能隨附於 Inkscape，也可透過 http://dxf-svg-convert.sourceforge.net/ 取得

en: Desktop Cutting Plotter
zh_TW: 繪圖交換格式

en: Desktop Cutting Plotter (*.DXF)
zh_TW: 繪圖交換格式 (*.DXF)

en: DXF Output
zh_TW: DXF 輸出

en: DXF file written by pstoedit
zh_TW: DXF 檔案由 pstoedit 寫入

en: pstoedit must be installed to run; see http://www.pstoedit.net/pstoedit
zh_TW: pstoedit 必須已安裝並執行；參看 http://www.pstoedit.net/pstoeit

en: Embed All Images
zh_TW: 內嵌所有圖像

en: Embed only selected images
zh_TW: 只內嵌已選的影像

en: EPS Input
zh_TW: EPS 輸入

en: EPSI Output
zh_TW: EPSI 輸出

en: Encapsulated Postscript Interchange (*.epsi)
zh_TW: Encapsulated Postscript 交換格式 (*.epsi)

en: Encapsulated Postscript with a thumbnail
zh_TW: Encapsulated Postscript 附帶縮圖

en: LaTeX formula
zh_TW: LaTeX 公式

en: LaTeX formula:
zh_TW: LaTex 公式：

en: Export as GIMP Palette
zh_TW: 以 GIMP 調色板匯出

en: Exports the colors of this document as GIMP Palette
zh_TW: 以 GIMP 調色板匯出此文件的顏色

en: GIMP Palette (*.gpl)
zh_TW: GIMP 調色板 (*.gpl)

en: Extract One Image
zh_TW: 提取一幅圖像

en: Path to save image
zh_TW: 路徑儲存到圖像

en: Open files saved with XFIG
zh_TW: 開啟用 XFIG 儲存的檔案

en: XFIG Graphics File (*.fig)
zh_TW: XFIG 圖形檔案 (*.fig)

en: XFIG Input
zh_TW: XFIG 輸入

en: Flatness
zh_TW: 平滑

en: Flatten Beziers
zh_TW: 平滑貝氏曲線

en: Calculate first derivative numerically
zh_TW: 計算一階導數

en: Draw Axes
zh_TW: 繪製軸線

en: End x-value
zh_TW: 結束 x-值

en: First derivative
zh_TW: 一階導數

en: Function
zh_TW: 函數

en: Function Plotter
zh_TW: 函數繪圖器

en: Isotropic scaling (uses smallest: width/xrange or height/yrange)
zh_TW: 等向縮放比例 (使用最小的：寬度/x 範圍或高度/y 範圍)

en: Multiply x-range by 2*pi
zh_TW: 以 2*pi 乘上 x-範圍

en: Range and Sampling
zh_TW: 範圍和取樣

en: Remove rectangle
zh_TW: 移除矩形

en: Samples
zh_TW: 樣本

en: Start x-value
zh_TW: 開始 x-值

en: y-value of rectangle's bottom
zh_TW: 矩形底部的 y-值

en: y-value of rectangle's top
zh_TW: 矩形頂端的 y-值

en: GIMP XCF maintaining layers (*.XCF)
zh_TW: GIMP XCF 維護層 (*.XCF)

en: Draw Handles
zh_TW: 繪製控柄

en: Command Line Options
zh_TW: 命令列選項

en: FAQ
zh_TW: 常見問題

en: Inkscape Manual
zh_TW: Inkscape 手冊

en: New in This Version
zh_TW: 本版新功能

en: Report a Bug
zh_TW: 報告程式錯誤

en: SVG 1.1 Specification
zh_TW: SVG 1.1 規格

en: Duplicate endpaths
zh_TW: 複製一份終點路徑

en: Interpolate
zh_TW: 插值

en: Interpolate style (experimental)
zh_TW: 插值風格(進階)

en: Interpolation method
zh_TW: 插值模式

en: Interpolation steps
zh_TW: 插值步長

en: Axiom
zh_TW: 規律

en: L-system
zh_TW: L-系統

en: Left angle
zh_TW: 左邊角度

en: Randomize angle (%)
zh_TW: 隨機角度(%)

en: Randomize step (%)
zh_TW: 隨機步長(%)

en: Right angle
zh_TW: 右邊角度

en: Rules
zh_TW: 規則

en: Step length (px)
zh_TW: 步長(像素)

en: Number of paragraphs
zh_TW: 段落數量

en: Paragraph length fluctuation (sentences)
zh_TW: 段落長度變動 (句子)

en: Sentences per paragraph
zh_TW: 每段落句數

en: Color Markers to Match Stroke
zh_TW: 顏色標誌以媒合筆畫

en: Font size [px]
zh_TW: 字型大小 [px]

note: <param name="unit" type="string" _gui-text="Unit {km|m|cm|mm|in|px|pt}">mm</param>
en: Length Unit:
zh_TW: 長度單位：

en: Measure
zh_TW: 量測

en: Measure Path
zh_TW: 測量路徑

en: Offset [px]
zh_TW: 偏移 [px]

en: Precision
zh_TW: 精確度

en: Scale Factor (Drawing:Real Length) = 1:
zh_TW: 尺度因數 (繪製中：真實長度)=1：

en: Angle
zh_TW: 角度

en: Extrude
zh_TW: 拉伸

en: Magnitude
zh_TW: 數量

en: ASCII Text with outline markup
zh_TW: 具有描邊標記的 ASCII 文字

en: Text Outline File (*.outline)
zh_TW: 文字描邊檔案 (*.outline)

en: Text Outline Input
zh_TW: 文字描邊輸入

en: Copies of the pattern:
zh_TW: 式樣複本：

en: Deformation type:
zh_TW: 去格式化型態：

en: Duplicate the pattern before deformation
zh_TW: 去格式化之前再製式樣

en: Pattern along Path
zh_TW: 式樣沿著路徑

en: Space between copies:
zh_TW: 複本間距：

en: Perspective
zh_TW: 透視

en: Postscript Input
zh_TW: Postscript 輸入

en: Developer Examples
zh_TW: 開發人員範例

en: RadioButton example
zh_TW: 單選按鈕範例

en: Select option:
zh_TW: 選取選項：

en: Select second option:
zh_TW: 選取第二選項：

en: Jitter nodes
zh_TW: 抖動節點

en: Maximum displacement, px
zh_TW: 最大移位值，px

en: Shift node handles
zh_TW: 位移節點控柄

en: Shift nodes
zh_TW: 位移節點

en: This effect randomly shifts the nodes (and optionally node handles) of the selected path.
zh_TW: 此效果會隨機位移已選取路徑的節點 (有時還有節點控柄)。

en: Use normal distribution
zh_TW: 使用正常分布

en: Random Point
zh_TW: 隨機點

en: Random Position
zh_TW: 隨機位置

en: Initial size
zh_TW: 初始尺寸

en: Minimum size
zh_TW: 最小尺寸

en: Random Tree
zh_TW: 隨機樹

en: A diagram created with the program Sketch
zh_TW: 使用 Sketch 程式建立的圖表

en: Sketch Diagram (*.sk)
zh_TW: Sketch 圖表 (*.sk)

en: Sketch Input
zh_TW: Sketch 輸入

en: Behavior
zh_TW: 行為

en: Straighten Segments
zh_TW: 平直線段

en: Envelope
zh_TW: 外殼

en: Compressed Inkscape SVG with media (*.zip)
zh_TW: 壓縮 Inkscape SVG 附帶媒體 (*.zip)

en: Inkscape's native file format compressed with Zip and including all media files
zh_TW: Inkscape 本地檔案格式使用 Zip 壓縮，並包含所有的媒體檔案

en: ZIP Output
zh_TW: ZIP 輸出

en: ASCII Text
zh_TW: ASCII 文字

en: Text File (*.txt)
zh_TW: 文字檔案 (*.txt)

en: Text Input
zh_TW: 文字輸入

en: Amount of whirl
zh_TW: 旋轉量

en: Rotation is clockwise
zh_TW: 順時針旋轉

en: Whirl
zh_TW: 旋轉

en: A popular graphics file format for clipart
zh_TW: 用於美術圖形的流行圖形檔案格式

en: Windows Metafile (*.wmf)
zh_TW: Windows 後設檔案 (*.wmf)

en: Windows Metafile Input
zh_TW: Windows 後設檔案輸入
