~leonardr/beautifulsoup/bs4 : contents of doc/source/index.rst at revision 644

~leonardr/beautifulsoup/bs4 : (revision 644)
.. _manual:

Beautiful Soup Documentation
============================

.. image:: 6.1.jpg
   :align: right
   :alt: "The Fish-Footman began by producing from under his arm a great letter, nearly as large as himself."

`Beautiful Soup <http://www.crummy.com/software/BeautifulSoup/>`_ is a
Python library for pulling data out of HTML and XML files. It works
with your favorite parser to provide idiomatic ways of navigating,
searching, and modifying the parse tree. It commonly saves programmers
hours or days of work.

These instructions illustrate all major features of Beautiful Soup 4,
with examples. I show you what the library is good for, how it works,
how to use it, how to make it do what you want, and what to do when it
violates your expectations.

This document covers Beautiful Soup version 4.11.0. The examples in
this documentation were written for Python 3.8.

You might be looking for the documentation for `Beautiful Soup 3
<http://www.crummy.com/software/BeautifulSoup/bs3/documentation.html>`_.
If so, you should know that Beautiful Soup 3 is no longer being
developed and that all support for it was dropped on December
31, 2020. If you want to learn about the differences between Beautiful
Soup 3 and Beautiful Soup 4, see `Porting code to BS4`_.

This documentation has been translated into other languages by
Beautiful Soup users:

* `这篇文档当然还有中文版. <https://www.crummy.com/software/BeautifulSoup/bs4/doc.zh/>`_
* このページは日本語で利用できます(`外部リンク <http://kondou.com/BS4/>`_)
* `이 문서는 한국어 번역도 가능합니다. <https://www.crummy.com/software/BeautifulSoup/bs4/doc.ko/>`_
* `Este documento também está disponível em Português do Brasil. <https://www.crummy.com/software/BeautifulSoup/bs4/doc.ptbr>`_
* `Эта документация доступна на русском языке. <https://www.crummy.com/software/BeautifulSoup/bs4/doc.ru/>`_

Getting help
------------

If you have questions about Beautiful Soup, or run into problems,
`send mail to the discussion group
<https://groups.google.com/forum/?fromgroups#!forum/beautifulsoup>`_. If
your problem involves parsing an HTML document, be sure to mention
:ref:`what the diagnose() function says <diagnose>` about
that document.

Quick Start
===========

Here's an HTML document I'll be using as an example throughout this
document. It's part of a story from `Alice in Wonderland`::

 html_doc = """<html><head><title>The Dormouse's story</title></head>
 <body>
 <p class="title"><b>The Dormouse's story</b></p>

 <p class="story">Once upon a time there were three little sisters; and their names were
 <a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>,
 <a href="http://example.com/lacie" class="sister" id="link2">Lacie</a> and
 <a href="http://example.com/tillie" class="sister" id="link3">Tillie</a>;
 and they lived at the bottom of a well.</p>

 <p class="story">...</p>
 """

Running the "three sisters" document through Beautiful Soup gives us a
``BeautifulSoup`` object, which represents the document as a nested
data structure::

 from bs4 import BeautifulSoup
 soup = BeautifulSoup(html_doc, 'html.parser')

 print(soup.prettify())
 # <html>
 #  <head>
 #   <title>
 #    The Dormouse's story
 #   </title>
 #  </head>
 #  <body>
 #   <p class="title">
 #    <b>
 #     The Dormouse's story
 #    </b>
 #   </p>
 #   <p class="story">
 #    Once upon a time there were three little sisters; and their names were
 #    <a class="sister" href="http://example.com/elsie" id="link1">
 #     Elsie
 #    </a>
 #    ,
 #    <a class="sister" href="http://example.com/lacie" id="link2">
 #     Lacie
 #    </a>
 #    and
 #    <a class="sister" href="http://example.com/tillie" id="link3">
 #     Tillie
 #    </a>
 #    ; and they lived at the bottom of a well.
 #   </p>
 #   <p class="story">
 #    ...
 #   </p>
 #  </body>
 # </html>

Here are some simple ways to navigate that data structure::

 soup.title
 # <title>The Dormouse's story</title>

 soup.title.name
 # u'title'

 soup.title.string
 # u'The Dormouse's story'

 soup.title.parent.name
 # u'head'

 soup.p
 # <p class="title"><b>The Dormouse's story</b></p>

 soup.p['class']
 # u'title'

 soup.a
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

 soup.find_all('a')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.find(id="link3")
 # <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>

One common task is extracting all the URLs found within a page's <a> tags::

 for link in soup.find_all('a'):
     print(link.get('href'))
 # http://example.com/elsie
 # http://example.com/lacie
 # http://example.com/tillie

Another common task is extracting all the text from a page::

 print(soup.get_text())
 # The Dormouse's story
 #
 # The Dormouse's story
 #
 # Once upon a time there were three little sisters; and their names were
 # Elsie,
 # Lacie and
 # Tillie;
 # and they lived at the bottom of a well.
 #
 # ...

Does this look like what you need? If so, read on.

Installing Beautiful Soup
=========================

If you're using a recent version of Debian or Ubuntu Linux, you can
install Beautiful Soup with the system package manager:

:kbd:`$ apt-get install python3-bs4`

Beautiful Soup 4 is published through PyPi, so if you can't install it
with the system packager, you can install it with ``easy_install`` or
``pip``. The package name is ``beautifulsoup4``. Make sure you use the
right version of ``pip`` or ``easy_install`` for your Python version
(these may be named ``pip3`` and ``easy_install3`` respectively).

:kbd:`$ easy_install beautifulsoup4`

:kbd:`$ pip install beautifulsoup4`

(The ``BeautifulSoup`` package is `not` what you want. That's
the previous major release, `Beautiful Soup 3`_. Lots of software uses
BS3, so it's still available, but if you're writing new code you
should install ``beautifulsoup4``.)

If you don't have ``easy_install`` or ``pip`` installed, you can
`download the Beautiful Soup 4 source tarball
<http://www.crummy.com/software/BeautifulSoup/download/4.x/>`_ and
install it with ``setup.py``.

:kbd:`$ python setup.py install`

If all else fails, the license for Beautiful Soup allows you to
package the entire library with your application. You can download the
tarball, copy its ``bs4`` directory into your application's codebase,
and use Beautiful Soup without installing it at all.

I use Python 3.8 to develop Beautiful Soup, but it should work with
other recent versions.

.. _parser-installation:


Installing a parser
-------------------

Beautiful Soup supports the HTML parser included in Python's standard
library, but it also supports a number of third-party Python parsers.
One is the `lxml parser <http://lxml.de/>`_. Depending on your setup,
you might install lxml with one of these commands:

:kbd:`$ apt-get install python-lxml`

:kbd:`$ easy_install lxml`

:kbd:`$ pip install lxml`

Another alternative is the pure-Python `html5lib parser
<http://code.google.com/p/html5lib/>`_, which parses HTML the way a
web browser does. Depending on your setup, you might install html5lib
with one of these commands:

:kbd:`$ apt-get install python-html5lib`

:kbd:`$ easy_install html5lib`

:kbd:`$ pip install html5lib`

This table summarizes the advantages and disadvantages of each parser library:

+----------------------+--------------------------------------------+--------------------------------+--------------------------+
| Parser               | Typical usage                              | Advantages                     | Disadvantages            |
+----------------------+--------------------------------------------+--------------------------------+--------------------------+
| Python's html.parser | ``BeautifulSoup(markup, "html.parser")``   | * Batteries included           | * Not as fast as lxml,   |
|                      |                                            | * Decent speed                 |   less lenient than      |
|                      |                                            | * Lenient (As of Python 3.2)   |   html5lib.              |
+----------------------+--------------------------------------------+--------------------------------+--------------------------+
| lxml's HTML parser   | ``BeautifulSoup(markup, "lxml")``          | * Very fast                    | * External C dependency  |
|                      |                                            | * Lenient                      |                          |
+----------------------+--------------------------------------------+--------------------------------+--------------------------+
| lxml's XML parser    | ``BeautifulSoup(markup, "lxml-xml")``      | * Very fast                    | * External C dependency  |
|                      | ``BeautifulSoup(markup, "xml")``           | * The only currently supported |                          |
|                      |                                            |   XML parser                   |                          |
+----------------------+--------------------------------------------+--------------------------------+--------------------------+
| html5lib             | ``BeautifulSoup(markup, "html5lib")``      | * Extremely lenient            | * Very slow              |
|                      |                                            | * Parses pages the same way a  | * External Python        |
|                      |                                            |   web browser does             |   dependency             |
|                      |                                            | * Creates valid HTML5          |                          |
+----------------------+--------------------------------------------+--------------------------------+--------------------------+

If you can, I recommend you install and use lxml for speed. If you're
using a very old version of Python -- earlier than 3.2.2 -- it's
`essential` that you install lxml or html5lib. Python's built-in HTML
parser is just not very good in those old versions.

Note that if a document is invalid, different parsers will generate
different Beautiful Soup trees for it. See `Differences
between parsers`_ for details.

Making the soup
===============

To parse a document, pass it into the ``BeautifulSoup``
constructor. You can pass in a string or an open filehandle::

 from bs4 import BeautifulSoup

 with open("index.html") as fp:
     soup = BeautifulSoup(fp, 'html.parser')

 soup = BeautifulSoup("<html>a web page</html>", 'html.parser')

First, the document is converted to Unicode, and HTML entities are
converted to Unicode characters::

 print(BeautifulSoup("<html><head></head><body>Sacr&eacute; bleu!</body></html>", "html.parser"))
 # <html><head></head><body>Sacré bleu!</body></html>

Beautiful Soup then parses the document using the best available
parser. It will use an HTML parser unless you specifically tell it to
use an XML parser. (See `Parsing XML`_.)

Kinds of objects
================

Beautiful Soup transforms a complex HTML document into a complex tree
of Python objects. But you'll only ever have to deal with about four
`kinds` of objects: ``Tag``, ``NavigableString``, ``BeautifulSoup``,
and ``Comment``.

.. _Tag:

``Tag``
-------

A ``Tag`` object corresponds to an XML or HTML tag in the original document::

 soup = BeautifulSoup('<b class="boldest">Extremely bold</b>', 'html.parser')
 tag = soup.b
 type(tag)
 # <class 'bs4.element.Tag'>

Tags have a lot of attributes and methods, and I'll cover most of them
in `Navigating the tree`_ and `Searching the tree`_. For now, the most
important features of a tag are its name and attributes.

Name
^^^^

Every tag has a name, accessible as ``.name``::

 tag.name
 # 'b'

If you change a tag's name, the change will be reflected in any HTML
markup generated by Beautiful Soup::

 tag.name = "blockquote"
 tag
 # <blockquote class="boldest">Extremely bold</blockquote>

Attributes
^^^^^^^^^^

A tag may have any number of attributes. The tag ``<b
id="boldest">`` has an attribute "id" whose value is
"boldest". You can access a tag's attributes by treating the tag like
a dictionary::

 tag = BeautifulSoup('<b id="boldest">bold</b>', 'html.parser').b
 tag['id']
 # 'boldest'

You can access that dictionary directly as ``.attrs``::

 tag.attrs
 # {'id': 'boldest'}

You can add, remove, and modify a tag's attributes. Again, this is
done by treating the tag as a dictionary::

 tag['id'] = 'verybold'
 tag['another-attribute'] = 1
 tag
 # <b another-attribute="1" id="verybold"></b>

 del tag['id']
 del tag['another-attribute']
 tag
 # <b>bold</b>

 tag['id']
 # KeyError: 'id'
 tag.get('id')
 # None

.. _multivalue:

Multi-valued attributes
&&&&&&&&&&&&&&&&&&&&&&&

HTML 4 defines a few attributes that can have multiple values. HTML 5
removes a couple of them, but defines a few more. The most common
multi-valued attribute is ``class`` (that is, a tag can have more than
one CSS class). Others include ``rel``, ``rev``, ``accept-charset``,
``headers``, and ``accesskey``. Beautiful Soup presents the value(s)
of a multi-valued attribute as a list::

 css_soup = BeautifulSoup('<p class="body"></p>', 'html.parser')
 css_soup.p['class']
 # ['body']
  
 css_soup = BeautifulSoup('<p class="body strikeout"></p>', 'html.parser')
 css_soup.p['class']
 # ['body', 'strikeout']

If an attribute `looks` like it has more than one value, but it's not
a multi-valued attribute as defined by any version of the HTML
standard, Beautiful Soup will leave the attribute alone::

 id_soup = BeautifulSoup('<p id="my id"></p>', 'html.parser')
 id_soup.p['id']
 # 'my id'

When you turn a tag back into a string, multiple attribute values are
consolidated::

 rel_soup = BeautifulSoup('<p>Back to the <a rel="index">homepage</a></p>', 'html.parser')
 rel_soup.a['rel']
 # ['index']
 rel_soup.a['rel'] = ['index', 'contents']
 print(rel_soup.p)
 # <p>Back to the <a rel="index contents">homepage</a></p>

You can disable this by passing ``multi_valued_attributes=None`` as a
keyword argument into the ``BeautifulSoup`` constructor::

 no_list_soup = BeautifulSoup('<p class="body strikeout"></p>', 'html.parser', multi_valued_attributes=None)
 no_list_soup.p['class']
 # 'body strikeout'

You can use ``get_attribute_list`` to get a value that's always a
list, whether or not it's a multi-valued atribute::

 id_soup.p.get_attribute_list('id')
 # ["my id"]
 
If you parse a document as XML, there are no multi-valued attributes::

 xml_soup = BeautifulSoup('<p class="body strikeout"></p>', 'xml')
 xml_soup.p['class']
 # 'body strikeout'

Again, you can configure this using the ``multi_valued_attributes`` argument::

 class_is_multi= { '*' : 'class'}
 xml_soup = BeautifulSoup('<p class="body strikeout"></p>', 'xml', multi_valued_attributes=class_is_multi)
 xml_soup.p['class']
 # ['body', 'strikeout']

You probably won't need to do this, but if you do, use the defaults as
a guide. They implement the rules described in the HTML specification::

 from bs4.builder import builder_registry
 builder_registry.lookup('html').DEFAULT_CDATA_LIST_ATTRIBUTES

  
``NavigableString``
-------------------

A string corresponds to a bit of text within a tag. Beautiful Soup
uses the ``NavigableString`` class to contain these bits of text::

 soup = BeautifulSoup('<b class="boldest">Extremely bold</b>', 'html.parser')
 tag = soup.b
 tag.string
 # 'Extremely bold'
 type(tag.string)
 # <class 'bs4.element.NavigableString'>

A ``NavigableString`` is just like a Python Unicode string, except
that it also supports some of the features described in `Navigating
the tree`_ and `Searching the tree`_. You can convert a
``NavigableString`` to a Unicode string with ``str``::

 unicode_string = str(tag.string)
 unicode_string
 # 'Extremely bold'
 type(unicode_string)
 # <type 'str'>

You can't edit a string in place, but you can replace one string with
another, using :ref:`replace_with()`::

 tag.string.replace_with("No longer bold")
 tag
 # <b class="boldest">No longer bold</b>

``NavigableString`` supports most of the features described in
`Navigating the tree`_ and `Searching the tree`_, but not all of
them. In particular, since a string can't contain anything (the way a
tag may contain a string or another tag), strings don't support the
``.contents`` or ``.string`` attributes, or the ``find()`` method.

If you want to use a ``NavigableString`` outside of Beautiful Soup,
you should call ``unicode()`` on it to turn it into a normal Python
Unicode string. If you don't, your string will carry around a
reference to the entire Beautiful Soup parse tree, even when you're
done using Beautiful Soup. This is a big waste of memory.

``BeautifulSoup``
-----------------

The ``BeautifulSoup`` object represents the parsed document as a
whole. For most purposes, you can treat it as a :ref:`Tag`
object. This means it supports most of the methods described in
`Navigating the tree`_ and `Searching the tree`_.

You can also pass a ``BeautifulSoup`` object into one of the methods
defined in `Modifying the tree`_, just as you would a :ref:`Tag`. This
lets you do things like combine two parsed documents::

 doc = BeautifulSoup("<document><content/>INSERT FOOTER HERE</document", "xml")
 footer = BeautifulSoup("<footer>Here's the footer</footer>", "xml")
 doc.find(text="INSERT FOOTER HERE").replace_with(footer)
 # 'INSERT FOOTER HERE'
 print(doc)
 # <?xml version="1.0" encoding="utf-8"?>
 # <document><content/><footer>Here's the footer</footer></document>

Since the ``BeautifulSoup`` object doesn't correspond to an actual
HTML or XML tag, it has no name and no attributes. But sometimes it's
useful to look at its ``.name``, so it's been given the special
``.name`` "[document]"::

 soup.name
 # '[document]'

Comments and other special strings
----------------------------------

``Tag``, ``NavigableString``, and ``BeautifulSoup`` cover almost
everything you'll see in an HTML or XML file, but there are a few
leftover bits. The main one you'll probably encounter
is the comment::

 markup = "<b><!--Hey, buddy. Want to buy a used parser?--></b>"
 soup = BeautifulSoup(markup, 'html.parser')
 comment = soup.b.string
 type(comment)
 # <class 'bs4.element.Comment'>

The ``Comment`` object is just a special type of ``NavigableString``::

 comment
 # 'Hey, buddy. Want to buy a used parser'

But when it appears as part of an HTML document, a ``Comment`` is
displayed with special formatting::

 print(soup.b.prettify())
 # <b>
 #  <!--Hey, buddy. Want to buy a used parser?-->
 # </b>

Beautiful Soup also defines classes called ``Stylesheet``, ``Script``,
and ``TemplateString``, for embedded CSS stylesheets (any strings
found inside a ``<style>`` tag), embedded Javascript (any strings
found in a ``<script>`` tag), and HTML templates (any strings inside a
``<template>`` tag). These classes work exactly the same way as
``NavigableString``; their only purpose is to make it easier to pick
out the main body of the page, by ignoring strings that represent
something else. `(These classes are new in Beautiful Soup 4.9.0, and
the html5lib parser doesn't use them.)`
 
Beautiful Soup defines classes for anything else that might show up in
an XML document: ``CData``, ``ProcessingInstruction``,
``Declaration``, and ``Doctype``. Like ``Comment``, these classes
are subclasses of ``NavigableString`` that add something extra to the
string. Here's an example that replaces the comment with a CDATA
block::

 from bs4 import CData
 cdata = CData("A CDATA block")
 comment.replace_with(cdata)

 print(soup.b.prettify())
 # <b>
 #  <![CDATA[A CDATA block]]>
 # </b>
 

Navigating the tree
===================

Here's the "Three sisters" HTML document again::

 html_doc = """
 <html><head><title>The Dormouse's story</title></head>
 <body>
 <p class="title"><b>The Dormouse's story</b></p>

 <p class="story">Once upon a time there were three little sisters; and their names were
 <a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>,
 <a href="http://example.com/lacie" class="sister" id="link2">Lacie</a> and
 <a href="http://example.com/tillie" class="sister" id="link3">Tillie</a>;
 and they lived at the bottom of a well.</p>

 <p class="story">...</p>
 """

 from bs4 import BeautifulSoup
 soup = BeautifulSoup(html_doc, 'html.parser')

I'll use this as an example to show you how to move from one part of
a document to another.

Going down
----------

Tags may contain strings and other tags. These elements are the tag's
`children`. Beautiful Soup provides a lot of different attributes for
navigating and iterating over a tag's children.

Note that Beautiful Soup strings don't support any of these
attributes, because a string can't have children.

Navigating using tag names
^^^^^^^^^^^^^^^^^^^^^^^^^^

The simplest way to navigate the parse tree is to say the name of the
tag you want. If you want the <head> tag, just say ``soup.head``::

 soup.head
 # <head><title>The Dormouse's story</title></head>

 soup.title
 # <title>The Dormouse's story</title>

You can do use this trick again and again to zoom in on a certain part
of the parse tree. This code gets the first <b> tag beneath the <body> tag::

 soup.body.b
 # <b>The Dormouse's story</b>

Using a tag name as an attribute will give you only the `first` tag by that
name::

 soup.a
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

If you need to get `all` the <a> tags, or anything more complicated
than the first tag with a certain name, you'll need to use one of the
methods described in `Searching the tree`_, such as `find_all()`::

 soup.find_all('a')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

``.contents`` and ``.children``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

A tag's children are available in a list called ``.contents``::

 head_tag = soup.head
 head_tag
 # <head><title>The Dormouse's story</title></head>

 head_tag.contents
 # [<title>The Dormouse's story</title>]

 title_tag = head_tag.contents[0]
 title_tag
 # <title>The Dormouse's story</title>
 title_tag.contents
 # ['The Dormouse's story']

The ``BeautifulSoup`` object itself has children. In this case, the
<html> tag is the child of the ``BeautifulSoup`` object.::

 len(soup.contents)
 # 1
 soup.contents[0].name
 # 'html'

A string does not have ``.contents``, because it can't contain
anything::

 text = title_tag.contents[0]
 text.contents
 # AttributeError: 'NavigableString' object has no attribute 'contents'

Instead of getting them as a list, you can iterate over a tag's
children using the ``.children`` generator::

 for child in title_tag.children:
     print(child)
 # The Dormouse's story

If you want to modify a tag's children, use the methods described in
`Modifying the tree`_. Don't modify the the ``.contents`` list
directly: that can lead to problems that are subtle and difficult to
spot.

 
``.descendants``
^^^^^^^^^^^^^^^^

The ``.contents`` and ``.children`` attributes only consider a tag's
`direct` children. For instance, the <head> tag has a single direct
child--the <title> tag::

 head_tag.contents
 # [<title>The Dormouse's story</title>]

But the <title> tag itself has a child: the string "The Dormouse's
story". There's a sense in which that string is also a child of the
<head> tag. The ``.descendants`` attribute lets you iterate over `all`
of a tag's children, recursively: its direct children, the children of
its direct children, and so on::

 for child in head_tag.descendants:
     print(child)
 # <title>The Dormouse's story</title>
 # The Dormouse's story

The <head> tag has only one child, but it has two descendants: the
<title> tag and the <title> tag's child. The ``BeautifulSoup`` object
only has one direct child (the <html> tag), but it has a whole lot of
descendants::

 len(list(soup.children))
 # 1
 len(list(soup.descendants))
 # 26

.. _.string:

``.string``
^^^^^^^^^^^

If a tag has only one child, and that child is a ``NavigableString``,
the child is made available as ``.string``::

 title_tag.string
 # 'The Dormouse's story'

If a tag's only child is another tag, and `that` tag has a
``.string``, then the parent tag is considered to have the same
``.string`` as its child::

 head_tag.contents
 # [<title>The Dormouse's story</title>]

 head_tag.string
 # 'The Dormouse's story'

If a tag contains more than one thing, then it's not clear what
``.string`` should refer to, so ``.string`` is defined to be
``None``::

 print(soup.html.string)
 # None

.. _string-generators:

``.strings`` and ``stripped_strings``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

If there's more than one thing inside a tag, you can still look at
just the strings. Use the ``.strings`` generator::

 for string in soup.strings:
     print(repr(string))
     '\n'
 # "The Dormouse's story"
 # '\n'
 # '\n'
 # "The Dormouse's story"
 # '\n'
 # 'Once upon a time there were three little sisters; and their names were\n'
 # 'Elsie'
 # ',\n'
 # 'Lacie'
 # ' and\n'
 # 'Tillie'
 # ';\nand they lived at the bottom of a well.'
 # '\n'
 # '...'
 # '\n'

These strings tend to have a lot of extra whitespace, which you can
remove by using the ``.stripped_strings`` generator instead::

 for string in soup.stripped_strings:
     print(repr(string))
 # "The Dormouse's story"
 # "The Dormouse's story"
 # 'Once upon a time there were three little sisters; and their names were'
 # 'Elsie'
 # ','
 # 'Lacie'
 # 'and'
 # 'Tillie'
 # ';\n and they lived at the bottom of a well.'
 # '...'

Here, strings consisting entirely of whitespace are ignored, and
whitespace at the beginning and end of strings is removed.

Going up
--------

Continuing the "family tree" analogy, every tag and every string has a
`parent`: the tag that contains it.

.. _.parent:

``.parent``
^^^^^^^^^^^

You can access an element's parent with the ``.parent`` attribute. In
the example "three sisters" document, the <head> tag is the parent
of the <title> tag::

 title_tag = soup.title
 title_tag
 # <title>The Dormouse's story</title>
 title_tag.parent
 # <head><title>The Dormouse's story</title></head>

The title string itself has a parent: the <title> tag that contains
it::

 title_tag.string.parent
 # <title>The Dormouse's story</title>

The parent of a top-level tag like <html> is the ``BeautifulSoup`` object
itself::

 html_tag = soup.html
 type(html_tag.parent)
 # <class 'bs4.BeautifulSoup'>

And the ``.parent`` of a ``BeautifulSoup`` object is defined as None::

 print(soup.parent)
 # None

.. _.parents:

``.parents``
^^^^^^^^^^^^

You can iterate over all of an element's parents with
``.parents``. This example uses ``.parents`` to travel from an <a> tag
buried deep within the document, to the very top of the document::

 link = soup.a
 link
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>
 for parent in link.parents:
     print(parent.name)
 # p
 # body
 # html
 # [document]

Going sideways
--------------

Consider a simple document like this::

 sibling_soup = BeautifulSoup("<a><b>text1</b><c>text2</c></a>", 'html.parser')
 print(sibling_soup.prettify())
 #   <a>
 #    <b>
 #     text1
 #    </b>
 #    <c>
 #     text2
 #    </c>
 #   </a>

The <b> tag and the <c> tag are at the same level: they're both direct
children of the same tag. We call them `siblings`. When a document is
pretty-printed, siblings show up at the same indentation level. You
can also use this relationship in the code you write.

``.next_sibling`` and ``.previous_sibling``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You can use ``.next_sibling`` and ``.previous_sibling`` to navigate
between page elements that are on the same level of the parse tree::

 sibling_soup.b.next_sibling
 # <c>text2</c>

 sibling_soup.c.previous_sibling
 # <b>text1</b>

The <b> tag has a ``.next_sibling``, but no ``.previous_sibling``,
because there's nothing before the <b> tag `on the same level of the
tree`. For the same reason, the <c> tag has a ``.previous_sibling``
but no ``.next_sibling``::

 print(sibling_soup.b.previous_sibling)
 # None
 print(sibling_soup.c.next_sibling)
 # None

The strings "text1" and "text2" are `not` siblings, because they don't
have the same parent::

 sibling_soup.b.string
 # 'text1'

 print(sibling_soup.b.string.next_sibling)
 # None

In real documents, the ``.next_sibling`` or ``.previous_sibling`` of a
tag will usually be a string containing whitespace. Going back to the
"three sisters" document::

 # <a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>
 # <a href="http://example.com/lacie" class="sister" id="link2">Lacie</a>
 # <a href="http://example.com/tillie" class="sister" id="link3">Tillie</a>

You might think that the ``.next_sibling`` of the first <a> tag would
be the second <a> tag. But actually, it's a string: the comma and
newline that separate the first <a> tag from the second::

 link = soup.a
 link
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

 link.next_sibling
 # ',\n '

The second <a> tag is actually the ``.next_sibling`` of the comma::

 link.next_sibling.next_sibling
 # <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>

.. _sibling-generators:

``.next_siblings`` and ``.previous_siblings``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You can iterate over a tag's siblings with ``.next_siblings`` or
``.previous_siblings``::

 for sibling in soup.a.next_siblings:
     print(repr(sibling))
 # ',\n'
 # <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>
 # ' and\n'
 # <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>
 # '; and they lived at the bottom of a well.'

 for sibling in soup.find(id="link3").previous_siblings:
     print(repr(sibling))
 # ' and\n'
 # <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>
 # ',\n'
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>
 # 'Once upon a time there were three little sisters; and their names were\n'

Going back and forth
--------------------

Take a look at the beginning of the "three sisters" document::

 # <html><head><title>The Dormouse's story</title></head>
 # <p class="title"><b>The Dormouse's story</b></p>

An HTML parser takes this string of characters and turns it into a
series of events: "open an <html> tag", "open a <head> tag", "open a
<title> tag", "add a string", "close the <title> tag", "open a <p>
tag", and so on. Beautiful Soup offers tools for reconstructing the
initial parse of the document.

.. _element-generators:

``.next_element`` and ``.previous_element``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

The ``.next_element`` attribute of a string or tag points to whatever
was parsed immediately afterwards. It might be the same as
``.next_sibling``, but it's usually drastically different.

Here's the final <a> tag in the "three sisters" document. Its
``.next_sibling`` is a string: the conclusion of the sentence that was
interrupted by the start of the <a> tag.::

 last_a_tag = soup.find("a", id="link3")
 last_a_tag
 # <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>

 last_a_tag.next_sibling
 # ';\nand they lived at the bottom of a well.'

But the ``.next_element`` of that <a> tag, the thing that was parsed
immediately after the <a> tag, is `not` the rest of that sentence:
it's the word "Tillie"::

 last_a_tag.next_element
 # 'Tillie'

That's because in the original markup, the word "Tillie" appeared
before that semicolon. The parser encountered an <a> tag, then the
word "Tillie", then the closing </a> tag, then the semicolon and rest of
the sentence. The semicolon is on the same level as the <a> tag, but the
word "Tillie" was encountered first.

The ``.previous_element`` attribute is the exact opposite of
``.next_element``. It points to whatever element was parsed
immediately before this one::

 last_a_tag.previous_element
 # ' and\n'
 last_a_tag.previous_element.next_element
 # <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>

``.next_elements`` and ``.previous_elements``
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

You should get the idea by now. You can use these iterators to move
forward or backward in the document as it was parsed::

 for element in last_a_tag.next_elements:
     print(repr(element))
 # 'Tillie'
 # ';\nand they lived at the bottom of a well.'
 # '\n'
 # <p class="story">...</p>
 # '...'
 # '\n'

Searching the tree
==================

Beautiful Soup defines a lot of methods for searching the parse tree,
but they're all very similar. I'm going to spend a lot of time explaining
the two most popular methods: ``find()`` and ``find_all()``. The other
methods take almost exactly the same arguments, so I'll just cover
them briefly.

Once again, I'll be using the "three sisters" document as an example::

 html_doc = """
 <html><head><title>The Dormouse's story</title></head>
 <body>
 <p class="title"><b>The Dormouse's story</b></p>

 <p class="story">Once upon a time there were three little sisters; and their names were
 <a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>,
 <a href="http://example.com/lacie" class="sister" id="link2">Lacie</a> and
 <a href="http://example.com/tillie" class="sister" id="link3">Tillie</a>;
 and they lived at the bottom of a well.</p>

 <p class="story">...</p>
 """

 from bs4 import BeautifulSoup
 soup = BeautifulSoup(html_doc, 'html.parser')

By passing in a filter to an argument like ``find_all()``, you can
zoom in on the parts of the document you're interested in.

Kinds of filters
----------------

Before talking in detail about ``find_all()`` and similar methods, I
want to show examples of different filters you can pass into these
methods. These filters show up again and again, throughout the
search API. You can use them to filter based on a tag's name,
on its attributes, on the text of a string, or on some combination of
these.

.. _a string:

A string
^^^^^^^^

The simplest filter is a string. Pass a string to a search method and
Beautiful Soup will perform a match against that exact string. This
code finds all the <b> tags in the document::

 soup.find_all('b')
 # [<b>The Dormouse's story</b>]

If you pass in a byte string, Beautiful Soup will assume the string is
encoded as UTF-8. You can avoid this by passing in a Unicode string instead.

.. _a regular expression:

A regular expression
^^^^^^^^^^^^^^^^^^^^

If you pass in a regular expression object, Beautiful Soup will filter
against that regular expression using its ``search()`` method. This code
finds all the tags whose names start with the letter "b"; in this
case, the <body> tag and the <b> tag::

 import re
 for tag in soup.find_all(re.compile("^b")):
     print(tag.name)
 # body
 # b

This code finds all the tags whose names contain the letter 't'::

 for tag in soup.find_all(re.compile("t")):
     print(tag.name)
 # html
 # title

.. _a list:

A list
^^^^^^

If you pass in a list, Beautiful Soup will allow a string match
against `any` item in that list. This code finds all the <a> tags
`and` all the <b> tags::

 soup.find_all(["a", "b"])
 # [<b>The Dormouse's story</b>,
 #  <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

.. _the value True:

``True``
^^^^^^^^

The value ``True`` matches everything it can. This code finds `all`
the tags in the document, but none of the text strings::

 for tag in soup.find_all(True):
     print(tag.name)
 # html
 # head
 # title
 # body
 # p
 # b
 # p
 # a
 # a
 # a
 # p

.. a function:

A function
^^^^^^^^^^

If none of the other matches work for you, define a function that
takes an element as its only argument. The function should return
``True`` if the argument matches, and ``False`` otherwise.

Here's a function that returns ``True`` if a tag defines the "class"
attribute but doesn't define the "id" attribute::

 def has_class_but_no_id(tag):
     return tag.has_attr('class') and not tag.has_attr('id')

Pass this function into ``find_all()`` and you'll pick up all the <p>
tags::

 soup.find_all(has_class_but_no_id)
 # [<p class="title"><b>The Dormouse's story</b></p>,
 #  <p class="story">Once upon a time there were…bottom of a well.</p>,
 #  <p class="story">...</p>]

This function only picks up the <p> tags. It doesn't pick up the <a>
tags, because those tags define both "class" and "id". It doesn't pick
up tags like <html> and <title>, because those tags don't define
"class".

If you pass in a function to filter on a specific attribute like
``href``, the argument passed into the function will be the attribute
value, not the whole tag. Here's a function that finds all ``a`` tags
whose ``href`` attribute *does not* match a regular expression::

 import re
 def not_lacie(href):
     return href and not re.compile("lacie").search(href)
 
 soup.find_all(href=not_lacie)
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

The function can be as complicated as you need it to be. Here's a
function that returns ``True`` if a tag is surrounded by string
objects::

 from bs4 import NavigableString
 def surrounded_by_strings(tag):
     return (isinstance(tag.next_element, NavigableString)
             and isinstance(tag.previous_element, NavigableString))

 for tag in soup.find_all(surrounded_by_strings):
     print(tag.name)
 # body
 # p
 # a
 # a
 # a
 # p

Now we're ready to look at the search methods in detail.

``find_all()``
--------------

Method signature: find_all(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`recursive
<recursive>`, :ref:`string <string>`, :ref:`limit <limit>`, :ref:`**kwargs <kwargs>`)

The ``find_all()`` method looks through a tag's descendants and
retrieves `all` descendants that match your filters. I gave several
examples in `Kinds of filters`_, but here are a few more::

 soup.find_all("title")
 # [<title>The Dormouse's story</title>]

 soup.find_all("p", "title")
 # [<p class="title"><b>The Dormouse's story</b></p>]

 soup.find_all("a")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.find_all(id="link2")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

 import re
 soup.find(string=re.compile("sisters"))
 # 'Once upon a time there were three little sisters; and their names were\n'

Some of these should look familiar, but others are new. What does it
mean to pass in a value for ``string``, or ``id``? Why does
``find_all("p", "title")`` find a <p> tag with the CSS class "title"?
Let's look at the arguments to ``find_all()``.

.. _name:

The ``name`` argument
^^^^^^^^^^^^^^^^^^^^^

Pass in a value for ``name`` and you'll tell Beautiful Soup to only
consider tags with certain names. Text strings will be ignored, as
will tags whose names that don't match.

This is the simplest usage::

 soup.find_all("title")
 # [<title>The Dormouse's story</title>]

Recall from `Kinds of filters`_ that the value to ``name`` can be `a
string`_, `a regular expression`_, `a list`_, `a function`_, or `the value
True`_.

.. _kwargs:

The keyword arguments
^^^^^^^^^^^^^^^^^^^^^

Any argument that's not recognized will be turned into a filter on one
of a tag's attributes. If you pass in a value for an argument called ``id``,
Beautiful Soup will filter against each tag's 'id' attribute::

 soup.find_all(id='link2')
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

If you pass in a value for ``href``, Beautiful Soup will filter
against each tag's 'href' attribute::

 soup.find_all(href=re.compile("elsie"))
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

You can filter an attribute based on `a string`_, `a regular
expression`_, `a list`_, `a function`_, or `the value True`_.

This code finds all tags whose ``id`` attribute has a value,
regardless of what the value is::

 soup.find_all(id=True)
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

You can filter multiple attributes at once by passing in more than one
keyword argument::

 soup.find_all(href=re.compile("elsie"), id='link1')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

Some attributes, like the data-* attributes in HTML 5, have names that
can't be used as the names of keyword arguments::

 data_soup = BeautifulSoup('<div data-foo="value">foo!</div>', 'html.parser')
 data_soup.find_all(data-foo="value")
 # SyntaxError: keyword can't be an expression

You can use these attributes in searches by putting them into a
dictionary and passing the dictionary into ``find_all()`` as the
``attrs`` argument::

 data_soup.find_all(attrs={"data-foo": "value"})
 # [<div data-foo="value">foo!</div>]

You can't use a keyword argument to search for HTML's 'name' element,
because Beautiful Soup uses the ``name`` argument to contain the name
of the tag itself. Instead, you can give a value to 'name' in the
``attrs`` argument::

 name_soup = BeautifulSoup('<input name="email"/>', 'html.parser')
 name_soup.find_all(name="email")
 # []
 name_soup.find_all(attrs={"name": "email"})
 # [<input name="email"/>]

.. _attrs:

Searching by CSS class
^^^^^^^^^^^^^^^^^^^^^^

It's very useful to search for a tag that has a certain CSS class, but
the name of the CSS attribute, "class", is a reserved word in
Python. Using ``class`` as a keyword argument will give you a syntax
error. As of Beautiful Soup 4.1.2, you can search by CSS class using
the keyword argument ``class_``::

 soup.find_all("a", class_="sister")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

As with any keyword argument, you can pass ``class_`` a string, a regular
expression, a function, or ``True``::

 soup.find_all(class_=re.compile("itl"))
 # [<p class="title"><b>The Dormouse's story</b></p>]

 def has_six_characters(css_class):
     return css_class is not None and len(css_class) == 6

 soup.find_all(class_=has_six_characters)
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

:ref:`Remember <multivalue>` that a single tag can have multiple
values for its "class" attribute. When you search for a tag that
matches a certain CSS class, you're matching against `any` of its CSS
classes::

 css_soup = BeautifulSoup('<p class="body strikeout"></p>', 'html.parser')
 css_soup.find_all("p", class_="strikeout")
 # [<p class="body strikeout"></p>]

 css_soup.find_all("p", class_="body")
 # [<p class="body strikeout"></p>]

You can also search for the exact string value of the ``class`` attribute::

 css_soup.find_all("p", class_="body strikeout")
 # [<p class="body strikeout"></p>]

But searching for variants of the string value won't work::

 css_soup.find_all("p", class_="strikeout body")
 # []

If you want to search for tags that match two or more CSS classes, you
should use a CSS selector::

 css_soup.select("p.strikeout.body")
 # [<p class="body strikeout"></p>]

In older versions of Beautiful Soup, which don't have the ``class_``
shortcut, you can use the ``attrs`` trick mentioned above. Create a
dictionary whose value for "class" is the string (or regular
expression, or whatever) you want to search for::

 soup.find_all("a", attrs={"class": "sister"})
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

.. _string:

The ``string`` argument
^^^^^^^^^^^^^^^^^^^^^^^

With ``string`` you can search for strings instead of tags. As with
``name`` and the keyword arguments, you can pass in `a string`_, `a
regular expression`_, `a list`_, `a function`_, or `the value True`_.
Here are some examples::

 soup.find_all(string="Elsie")
 # ['Elsie']

 soup.find_all(string=["Tillie", "Elsie", "Lacie"])
 # ['Elsie', 'Lacie', 'Tillie']

 soup.find_all(string=re.compile("Dormouse"))
 # ["The Dormouse's story", "The Dormouse's story"]

 def is_the_only_string_within_a_tag(s):
     """Return True if this string is the only child of its parent tag."""
     return (s == s.parent.string)

 soup.find_all(string=is_the_only_string_within_a_tag)
 # ["The Dormouse's story", "The Dormouse's story", 'Elsie', 'Lacie', 'Tillie', '...']

Although ``string`` is for finding strings, you can combine it with
arguments that find tags: Beautiful Soup will find all tags whose
``.string`` matches your value for ``string``. This code finds the <a>
tags whose ``.string`` is "Elsie"::

 soup.find_all("a", string="Elsie")
 # [<a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>]

The ``string`` argument is new in Beautiful Soup 4.4.0. In earlier
versions it was called ``text``::

 soup.find_all("a", text="Elsie")
 # [<a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>]

.. _limit:

The ``limit`` argument
^^^^^^^^^^^^^^^^^^^^^^

``find_all()`` returns all the tags and strings that match your
filters. This can take a while if the document is large. If you don't
need `all` the results, you can pass in a number for ``limit``. This
works just like the LIMIT keyword in SQL. It tells Beautiful Soup to
stop gathering results after it's found a certain number.

There are three links in the "three sisters" document, but this code
only finds the first two::

 soup.find_all("a", limit=2)
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

.. _recursive:

The ``recursive`` argument
^^^^^^^^^^^^^^^^^^^^^^^^^^

If you call ``mytag.find_all()``, Beautiful Soup will examine all the
descendants of ``mytag``: its children, its children's children, and
so on. If you only want Beautiful Soup to consider direct children,
you can pass in ``recursive=False``. See the difference here::

 soup.html.find_all("title")
 # [<title>The Dormouse's story</title>]

 soup.html.find_all("title", recursive=False)
 # []

Here's that part of the document::

 <html>
  <head>
   <title>
    The Dormouse's story
   </title>
  </head>
 ...

The <title> tag is beneath the <html> tag, but it's not `directly`
beneath the <html> tag: the <head> tag is in the way. Beautiful Soup
finds the <title> tag when it's allowed to look at all descendants of
the <html> tag, but when ``recursive=False`` restricts it to the
<html> tag's immediate children, it finds nothing.

Beautiful Soup offers a lot of tree-searching methods (covered below),
and they mostly take the same arguments as ``find_all()``: ``name``,
``attrs``, ``string``, ``limit``, and the keyword arguments. But the
``recursive`` argument is different: ``find_all()`` and ``find()`` are
the only methods that support it. Passing ``recursive=False`` into a
method like ``find_parents()`` wouldn't be very useful.

Calling a tag is like calling ``find_all()``
--------------------------------------------

Because ``find_all()`` is the most popular method in the Beautiful
Soup search API, you can use a shortcut for it. If you treat the
``BeautifulSoup`` object or a ``Tag`` object as though it were a
function, then it's the same as calling ``find_all()`` on that
object. These two lines of code are equivalent::

 soup.find_all("a")
 soup("a")

These two lines are also equivalent::

 soup.title.find_all(string=True)
 soup.title(string=True)

``find()``
----------

Method signature: find(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`recursive
<recursive>`, :ref:`string <string>`, :ref:`**kwargs <kwargs>`)

The ``find_all()`` method scans the entire document looking for
results, but sometimes you only want to find one result. If you know a
document only has one <body> tag, it's a waste of time to scan the
entire document looking for more. Rather than passing in ``limit=1``
every time you call ``find_all``, you can use the ``find()``
method. These two lines of code are `nearly` equivalent::

 soup.find_all('title', limit=1)
 # [<title>The Dormouse's story</title>]

 soup.find('title')
 # <title>The Dormouse's story</title>

The only difference is that ``find_all()`` returns a list containing
the single result, and ``find()`` just returns the result.

If ``find_all()`` can't find anything, it returns an empty list. If
``find()`` can't find anything, it returns ``None``::

 print(soup.find("nosuchtag"))
 # None

Remember the ``soup.head.title`` trick from `Navigating using tag
names`_? That trick works by repeatedly calling ``find()``::

 soup.head.title
 # <title>The Dormouse's story</title>

 soup.find("head").find("title")
 # <title>The Dormouse's story</title>

``find_parents()`` and ``find_parent()``
----------------------------------------

Method signature: find_parents(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`limit <limit>`, :ref:`**kwargs <kwargs>`)

Method signature: find_parent(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`**kwargs <kwargs>`)

I spent a lot of time above covering ``find_all()`` and
``find()``. The Beautiful Soup API defines ten other methods for
searching the tree, but don't be afraid. Five of these methods are
basically the same as ``find_all()``, and the other five are basically
the same as ``find()``. The only differences are in what parts of the
tree they search.

First let's consider ``find_parents()`` and
``find_parent()``. Remember that ``find_all()`` and ``find()`` work
their way down the tree, looking at tag's descendants. These methods
do the opposite: they work their way `up` the tree, looking at a tag's
(or a string's) parents. Let's try them out, starting from a string
buried deep in the "three daughters" document::

 a_string = soup.find(string="Lacie")
 a_string
 # 'Lacie'

 a_string.find_parents("a")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

 a_string.find_parent("p")
 # <p class="story">Once upon a time there were three little sisters; and their names were
 #  <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a> and
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>;
 #  and they lived at the bottom of a well.</p>

 a_string.find_parents("p", class_="title")
 # []

One of the three <a> tags is the direct parent of the string in
question, so our search finds it. One of the three <p> tags is an
indirect parent of the string, and our search finds that as
well. There's a <p> tag with the CSS class "title" `somewhere` in the
document, but it's not one of this string's parents, so we can't find
it with ``find_parents()``.

You may have made the connection between ``find_parent()`` and
``find_parents()``, and the `.parent`_ and `.parents`_ attributes
mentioned earlier. The connection is very strong. These search methods
actually use ``.parents`` to iterate over all the parents, and check
each one against the provided filter to see if it matches.

``find_next_siblings()`` and ``find_next_sibling()``
----------------------------------------------------

Method signature: find_next_siblings(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`limit <limit>`, :ref:`**kwargs <kwargs>`)

Method signature: find_next_sibling(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`**kwargs <kwargs>`)

These methods use :ref:`.next_siblings <sibling-generators>` to
iterate over the rest of an element's siblings in the tree. The
``find_next_siblings()`` method returns all the siblings that match,
and ``find_next_sibling()`` only returns the first one::

 first_link = soup.a
 first_link
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

 first_link.find_next_siblings("a")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 first_story_paragraph = soup.find("p", "story")
 first_story_paragraph.find_next_sibling("p")
 # <p class="story">...</p>

``find_previous_siblings()`` and ``find_previous_sibling()``
------------------------------------------------------------

Method signature: find_previous_siblings(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`limit <limit>`, :ref:`**kwargs <kwargs>`)

Method signature: find_previous_sibling(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`**kwargs <kwargs>`)

These methods use :ref:`.previous_siblings <sibling-generators>` to iterate over an element's
siblings that precede it in the tree. The ``find_previous_siblings()``
method returns all the siblings that match, and
``find_previous_sibling()`` only returns the first one::

 last_link = soup.find("a", id="link3")
 last_link
 # <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>

 last_link.find_previous_siblings("a")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

 first_story_paragraph = soup.find("p", "story")
 first_story_paragraph.find_previous_sibling("p")
 # <p class="title"><b>The Dormouse's story</b></p>


``find_all_next()`` and ``find_next()``
---------------------------------------

Method signature: find_all_next(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`limit <limit>`, :ref:`**kwargs <kwargs>`)

Method signature: find_next(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`**kwargs <kwargs>`)

These methods use :ref:`.next_elements <element-generators>` to
iterate over whatever tags and strings that come after it in the
document. The ``find_all_next()`` method returns all matches, and
``find_next()`` only returns the first match::

 first_link = soup.a
 first_link
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

 first_link.find_all_next(string=True)
 # ['Elsie', ',\n', 'Lacie', ' and\n', 'Tillie',
 #  ';\nand they lived at the bottom of a well.', '\n', '...', '\n']

 first_link.find_next("p")
 # <p class="story">...</p>

In the first example, the string "Elsie" showed up, even though it was
contained within the <a> tag we started from. In the second example,
the last <p> tag in the document showed up, even though it's not in
the same part of the tree as the <a> tag we started from. For these
methods, all that matters is that an element match the filter, and
show up later in the document than the starting element.

``find_all_previous()`` and ``find_previous()``
-----------------------------------------------

Method signature: find_all_previous(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`limit <limit>`, :ref:`**kwargs <kwargs>`)

Method signature: find_previous(:ref:`name <name>`, :ref:`attrs <attrs>`, :ref:`string <string>`, :ref:`**kwargs <kwargs>`)

These methods use :ref:`.previous_elements <element-generators>` to
iterate over the tags and strings that came before it in the
document. The ``find_all_previous()`` method returns all matches, and
``find_previous()`` only returns the first match::

 first_link = soup.a
 first_link
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

 first_link.find_all_previous("p")
 # [<p class="story">Once upon a time there were three little sisters; ...</p>,
 #  <p class="title"><b>The Dormouse's story</b></p>]

 first_link.find_previous("title")
 # <title>The Dormouse's story</title>

The call to ``find_all_previous("p")`` found the first paragraph in
the document (the one with class="title"), but it also finds the
second paragraph, the <p> tag that contains the <a> tag we started
with. This shouldn't be too surprising: we're looking at all the tags
that show up earlier in the document than the one we started with. A
<p> tag that contains an <a> tag must have shown up before the <a>
tag it contains.

CSS selectors
-------------

``BeautifulSoup`` has a ``.select()`` method which uses the `SoupSieve
<https://facelessuser.github.io/soupsieve/>`_ package to run a CSS
selector against a parsed document and return all the matching
elements. ``Tag`` has a similar method which runs a CSS selector
against the contents of a single tag.

(The SoupSieve integration was added in Beautiful Soup 4.7.0. Earlier
versions also have the ``.select()`` method, but only the most
commonly-used CSS selectors are supported. If you installed Beautiful
Soup through ``pip``, SoupSieve was installed at the same time, so you
don't have to do anything extra.)

The SoupSieve `documentation
<https://facelessuser.github.io/soupsieve/>`_ lists all the currently
supported CSS selectors, but here are some of the basics:

You can find tags::

 soup.select("title")
 # [<title>The Dormouse's story</title>]

 soup.select("p:nth-of-type(3)")
 # [<p class="story">...</p>]

Find tags beneath other tags::

 soup.select("body a")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie"  id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.select("html head title")
 # [<title>The Dormouse's story</title>]

Find tags `directly` beneath other tags::

 soup.select("head > title")
 # [<title>The Dormouse's story</title>]

 soup.select("p > a")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie"  id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.select("p > a:nth-of-type(2)")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

 soup.select("p > #link1")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

 soup.select("body > a")
 # []

Find the siblings of tags::

 soup.select("#link1 ~ .sister")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie"  id="link3">Tillie</a>]

 soup.select("#link1 + .sister")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

Find tags by CSS class::

 soup.select(".sister")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.select("[class~=sister]")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

Find tags by ID::

 soup.select("#link1")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

 soup.select("a#link2")
 # [<a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

Find tags that match any selector from a list of selectors::

 soup.select("#link1,#link2")
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>]

Test for the existence of an attribute::

 soup.select('a[href]')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

Find tags by attribute value::

 soup.select('a[href="http://example.com/elsie"]')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

 soup.select('a[href^="http://example.com/"]')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>,
 #  <a class="sister" href="http://example.com/lacie" id="link2">Lacie</a>,
 #  <a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.select('a[href$="tillie"]')
 # [<a class="sister" href="http://example.com/tillie" id="link3">Tillie</a>]

 soup.select('a[href*=".com/el"]')
 # [<a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>]

There's also a method called ``select_one()``, which finds only the
first tag that matches a selector::

 soup.select_one(".sister")
 # <a class="sister" href="http://example.com/elsie" id="link1">Elsie</a>

If you've parsed XML that defines namespaces, you can use them in CSS
selectors.::

 from bs4 import BeautifulSoup
 xml = """<tag xmlns:ns1="http://namespace1/" xmlns:ns2="http://namespace2/">
  <ns1:child>I'm in namespace 1</ns1:child>
  <ns2:child>I'm in namespace 2</ns2:child>
 </tag> """
 soup = BeautifulSoup(xml, "xml")

 soup.select("child")
 # [<ns1:child>I'm in namespace 1</ns1:child>, <ns2:child>I'm in namespace 2</ns2:child>]

 soup.select("ns1|child")
 # [<ns1:child>I'm in namespace 1</ns1:child>]
 
When handling a CSS selector that uses namespaces, Beautiful Soup
always tries to use namespace prefixes that make sense based on what
it saw while parsing the document. You can always provide your own
dictionary of abbreviations::

 namespaces = dict(first="http://namespace1/", second="http://namespace2/")
 soup.select("second|child", namespaces=namespaces)
 # [<ns1:child>I'm in namespace 2</ns1:child>]
 
All this CSS selector stuff is a convenience for people who already
know the CSS selector syntax. You can do all of this with the
Beautiful Soup API. And if CSS selectors are all you need, you should
parse the document with lxml: it's a lot faster. But this lets you
`combine` CSS selectors with the Beautiful Soup API.

Modifying the tree
==================

Beautiful Soup's main strength is in searching the parse tree, but you
can also modify the tree and write your changes as a new HTML or XML
document.

Changing tag names and attributes
---------------------------------

I covered this earlier, in `Attributes`_, but it bears repeating. You
can rename a tag, change the values of its attributes, add new
attributes, and delete attributes::

 soup = BeautifulSoup('<b class="boldest">Extremely bold</b>', 'html.parser')
 tag = soup.b

 tag.name = "blockquote"
 tag['class'] = 'verybold'
 tag['id'] = 1
 tag
 # <blockquote class="verybold" id="1">Extremely bold</blockquote>

 del tag['class']
 del tag['id']
 tag
 # <blockquote>Extremely bold</blockquote>

Modifying ``.string``
---------------------

If you set a tag's ``.string`` attribute to a new string, the tag's contents are
replaced with that string::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')

 tag = soup.a
 tag.string = "New link text."
 tag
 # <a href="http://example.com/">New link text.</a>
  
Be careful: if the tag contained other tags, they and all their
contents will be destroyed.  

``append()``
------------

You can add to a tag's contents with ``Tag.append()``. It works just
like calling ``.append()`` on a Python list::

 soup = BeautifulSoup("<a>Foo</a>", 'html.parser')
 soup.a.append("Bar")

 soup
 # <a>FooBar</a>
 soup.a.contents
 # ['Foo', 'Bar']

``extend()``
------------

Starting in Beautiful Soup 4.7.0, ``Tag`` also supports a method
called ``.extend()``, which adds every element of a list to a ``Tag``,
in order::

 soup = BeautifulSoup("<a>Soup</a>", 'html.parser')
 soup.a.extend(["'s", " ", "on"])

 soup
 # <a>Soup's on</a>
 soup.a.contents
 # ['Soup', ''s', ' ', 'on']
   
``NavigableString()`` and ``.new_tag()``
-------------------------------------------------

If you need to add a string to a document, no problem--you can pass a
Python string in to ``append()``, or you can call the ``NavigableString``
constructor::

 soup = BeautifulSoup("<b></b>", 'html.parser')
 tag = soup.b
 tag.append("Hello")
 new_string = NavigableString(" there")
 tag.append(new_string)
 tag
 # <b>Hello there.</b>
 tag.contents
 # ['Hello', ' there']

If you want to create a comment or some other subclass of
``NavigableString``, just call the constructor::

 from bs4 import Comment
 new_comment = Comment("Nice to see you.")
 tag.append(new_comment)
 tag
 # <b>Hello there<!--Nice to see you.--></b>
 tag.contents
 # ['Hello', ' there', 'Nice to see you.']

`(This is a new feature in Beautiful Soup 4.4.0.)`

What if you need to create a whole new tag?  The best solution is to
call the factory method ``BeautifulSoup.new_tag()``::

 soup = BeautifulSoup("<b></b>", 'html.parser')
 original_tag = soup.b

 new_tag = soup.new_tag("a", href="http://www.example.com")
 original_tag.append(new_tag)
 original_tag
 # <b><a href="http://www.example.com"></a></b>

 new_tag.string = "Link text."
 original_tag
 # <b><a href="http://www.example.com">Link text.</a></b>

Only the first argument, the tag name, is required.

``insert()``
------------

``Tag.insert()`` is just like ``Tag.append()``, except the new element
doesn't necessarily go at the end of its parent's
``.contents``. It'll be inserted at whatever numeric position you
say. It works just like ``.insert()`` on a Python list::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 tag = soup.a

 tag.insert(1, "but did not endorse ")
 tag
 # <a href="http://example.com/">I linked to but did not endorse <i>example.com</i></a>
 tag.contents
 # ['I linked to ', 'but did not endorse', <i>example.com</i>]

``insert_before()`` and ``insert_after()``
------------------------------------------

The ``insert_before()`` method inserts tags or strings immediately
before something else in the parse tree::

 soup = BeautifulSoup("<b>leave</b>", 'html.parser')
 tag = soup.new_tag("i")
 tag.string = "Don't"
 soup.b.string.insert_before(tag)
 soup.b
 # <b><i>Don't</i>leave</b>

The ``insert_after()`` method inserts tags or strings immediately
following something else in the parse tree::

 div = soup.new_tag('div')
 div.string = 'ever'
 soup.b.i.insert_after(" you ", div)
 soup.b
 # <b><i>Don't</i> you <div>ever</div> leave</b>
 soup.b.contents
 # [<i>Don't</i>, ' you', <div>ever</div>, 'leave']

``clear()``
-----------

``Tag.clear()`` removes the contents of a tag::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 tag = soup.a

 tag.clear()
 tag
 # <a href="http://example.com/"></a>

``extract()``
-------------

``PageElement.extract()`` removes a tag or string from the tree. It
returns the tag or string that was extracted::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 a_tag = soup.a

 i_tag = soup.i.extract()

 a_tag
 # <a href="http://example.com/">I linked to</a>

 i_tag
 # <i>example.com</i>

 print(i_tag.parent)
 # None

At this point you effectively have two parse trees: one rooted at the
``BeautifulSoup`` object you used to parse the document, and one rooted
at the tag that was extracted. You can go on to call ``extract`` on
a child of the element you extracted::

 my_string = i_tag.string.extract()
 my_string
 # 'example.com'

 print(my_string.parent)
 # None
 i_tag
 # <i></i>


``decompose()``
---------------

``Tag.decompose()`` removes a tag from the tree, then `completely
destroys it and its contents`::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 a_tag = soup.a
 i_tag = soup.i

 i_tag.decompose()
 a_tag
 # <a href="http://example.com/">I linked to</a>

The behavior of a decomposed ``Tag`` or ``NavigableString`` is not
defined and you should not use it for anything. If you're not sure
whether something has been decomposed, you can check its
``.decomposed`` property `(new in Beautiful Soup 4.9.0)`::

 i_tag.decomposed
 # True

 a_tag.decomposed
 # False


.. _replace_with():

``replace_with()``
------------------

``PageElement.replace_with()`` removes a tag or string from the tree,
and replaces it with one or more tags or strings of your choice::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 a_tag = soup.a

 new_tag = soup.new_tag("b")
 new_tag.string = "example.com"
 a_tag.i.replace_with(new_tag)

 a_tag
 # <a href="http://example.com/">I linked to <b>example.com</b></a>

 bold_tag = soup.new_tag("b")
 bold_tag.string = "example"
 i_tag = soup.new_tag("i")
 i_tag.string = "net"
 a_tag.b.replace_with(bold_tag, ".", i_tag)

 a_tag
 # <a href="http://example.com/">I linked to <b>example</b>.<i>net</i></a>

``replace_with()`` returns the tag or string that got replaced, so
that you can examine it or add it back to another part of the tree.

`The ability to pass multiple arguments into replace_with() is new
in Beautiful Soup 4.10.0.`


``wrap()``
----------

``PageElement.wrap()`` wraps an element in the tag you specify. It
returns the new wrapper::

 soup = BeautifulSoup("<p>I wish I was bold.</p>", 'html.parser')
 soup.p.string.wrap(soup.new_tag("b"))
 # <b>I wish I was bold.</b>

 soup.p.wrap(soup.new_tag("div"))
 # <div><p><b>I wish I was bold.</b></p></div>

`This method is new in Beautiful Soup 4.0.5.`

``unwrap()``
---------------------------

``Tag.unwrap()`` is the opposite of ``wrap()``. It replaces a tag with
whatever's inside that tag. It's good for stripping out markup::

 markup = '<a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 a_tag = soup.a

 a_tag.i.unwrap()
 a_tag
 # <a href="http://example.com/">I linked to example.com</a>

Like ``replace_with()``, ``unwrap()`` returns the tag
that was replaced.

``smooth()``
---------------------------

After calling a bunch of methods that modify the parse tree, you may end up with two or more ``NavigableString`` objects next to each other. Beautiful Soup doesn't have any problems with this, but since it can't happen in a freshly parsed document, you might not expect behavior like the following::

 soup = BeautifulSoup("<p>A one</p>", 'html.parser')
 soup.p.append(", a two")

 soup.p.contents
 # ['A one', ', a two']

 print(soup.p.encode())
 # b'<p>A one, a two</p>'

 print(soup.p.prettify())
 # <p>
 #  A one
 #  , a two
 # </p>

You can call ``Tag.smooth()`` to clean up the parse tree by consolidating adjacent strings::

 soup.smooth()

 soup.p.contents
 # ['A one, a two']

 print(soup.p.prettify())
 # <p>
 #  A one, a two
 # </p>

`This method is new in Beautiful Soup 4.8.0.`

Output
======

.. _.prettyprinting:

Pretty-printing
---------------

The ``prettify()`` method will turn a Beautiful Soup parse tree into a
nicely formatted Unicode string, with a separate line for each
tag and each string::

 markup = '<html><head><body><a href="http://example.com/">I linked to <i>example.com</i></a>'
 soup = BeautifulSoup(markup, 'html.parser')
 soup.prettify()
 # '<html>\n <head>\n </head>\n <body>\n  <a href="http://example.com/">\n...'

 print(soup.prettify())
 # <html>
 #  <head>
 #  </head>
 #  <body>
 #   <a href="http://example.com/">
 #    I linked to
 #    <i>
 #     example.com
 #    </i>
 #   </a>
 #  </body>
 # </html>

You can call ``prettify()`` on the top-level ``BeautifulSoup`` object,
or on any of its ``Tag`` objects::

 print(soup.a.prettify())
 # <a href="http://example.com/">
 #  I linked to
 #  <i>
 #   example.com
 #  </i>
 # </a>

Since it adds whitespace (in the form of newlines), ``prettify()``
changes the meaning of an HTML document and should not be used to
reformat one. The goal of ``prettify()`` is to help you visually
understand the structure of the documents you work with.
  
Non-pretty printing
-------------------

If you just want a string, with no fancy formatting, you can call
``str()`` on a ``BeautifulSoup`` object, or on a ``Tag`` within it::

 str(soup)
 # '<html><head></head><body><a href="http://example.com/">I linked to <i>example.com</i></a></body></html>'

 str(soup.a)
 # '<a href="http://example.com/">I linked to <i>example.com</i></a>'

The ``str()`` function returns a string encoded in UTF-8. See
`Encodings`_ for other options.

You can also call ``encode()`` to get a bytestring, and ``decode()``
to get Unicode.

.. _output_formatters:

Output formatters
-----------------

If you give Beautiful Soup a document that contains HTML entities like
"&lquot;", they'll be converted to Unicode characters::

 soup = BeautifulSoup("&ldquo;Dammit!&rdquo; he said.", 'html.parser')
 str(soup)
 # '“Dammit!” he said.'

If you then convert the document to a bytestring, the Unicode characters
will be encoded as UTF-8. You won't get the HTML entities back::

 soup.encode("utf8")
 # b'\xe2\x80\x9cDammit!\xe2\x80\x9d he said.'

By default, the only characters that are escaped upon output are bare
ampersands and angle brackets. These get turned into "&amp;", "&lt;",
and "&gt;", so that Beautiful Soup doesn't inadvertently generate
invalid HTML or XML::

 soup = BeautifulSoup("<p>The law firm of Dewey, Cheatem, & Howe</p>", 'html.parser')
 soup.p
 # <p>The law firm of Dewey, Cheatem, &amp; Howe</p>

 soup = BeautifulSoup('<a href="http://example.com/?foo=val1&bar=val2">A link</a>', 'html.parser')
 soup.a
 # <a href="http://example.com/?foo=val1&amp;bar=val2">A link</a>

You can change this behavior by providing a value for the
``formatter`` argument to ``prettify()``, ``encode()``, or
``decode()``. Beautiful Soup recognizes five possible values for
``formatter``.

The default is ``formatter="minimal"``. Strings will only be processed
enough to ensure that Beautiful Soup generates valid HTML/XML::

 french = "<p>Il a dit &lt;&lt;Sacr&eacute; bleu!&gt;&gt;</p>"
 soup = BeautifulSoup(french, 'html.parser')
 print(soup.prettify(formatter="minimal"))
 # <p>
 #  Il a dit &lt;&lt;Sacré bleu!&gt;&gt;
 # </p>

If you pass in ``formatter="html"``, Beautiful Soup will convert
Unicode characters to HTML entities whenever possible::

 print(soup.prettify(formatter="html"))
 # <p>
 #  Il a dit &lt;&lt;Sacr&eacute; bleu!&gt;&gt;
 # </p>

If you pass in ``formatter="html5"``, it's similar to
``formatter="html"``, but Beautiful Soup will
omit the closing slash in HTML void tags like "br"::

 br = BeautifulSoup("<br>", 'html.parser').br
 
 print(br.encode(formatter="html"))
 # b'<br/>'
 
 print(br.encode(formatter="html5"))
 # b'<br>'

In addition, any attributes whose values are the empty string
will become HTML-style boolean attributes::

 option = BeautifulSoup('<option selected=""></option>').option
 print(option.encode(formatter="html"))
 # b'<option selected=""></option>'
 
 print(option.encode(formatter="html5"))
 # b'<option selected></option>'

*(This behavior is new as of Beautiful Soup 4.10.0.)*
 
If you pass in ``formatter=None``, Beautiful Soup will not modify
strings at all on output. This is the fastest option, but it may lead
to Beautiful Soup generating invalid HTML/XML, as in these examples::

 print(soup.prettify(formatter=None))
 # <p>
 #  Il a dit <<Sacré bleu!>>
 # </p>

 link_soup = BeautifulSoup('<a href="http://example.com/?foo=val1&bar=val2">A link</a>', 'html.parser')
 print(link_soup.a.encode(formatter=None))
 # b'<a href="http://example.com/?foo=val1&bar=val2">A link</a>'

If you need more sophisticated control over your output, you can
use Beautiful Soup's ``Formatter`` class. Here's a formatter that
converts strings to uppercase, whether they occur in a text node or in an
attribute value::

 from bs4.formatter import HTMLFormatter
 def uppercase(str):
     return str.upper()
 
 formatter = HTMLFormatter(uppercase)

 print(soup.prettify(formatter=formatter))
 # <p>
 #  IL A DIT <<SACRÉ BLEU!>>
 # </p>

 print(link_soup.a.prettify(formatter=formatter))
 # <a href="HTTP://EXAMPLE.COM/?FOO=VAL1&BAR=VAL2">
 #  A LINK
 # </a>

Here's a formatter that increases the indentation when pretty-printing::

 formatter = HTMLFormatter(indent=8)
 print(link_soup.a.prettify(formatter=formatter))
 # <a href="http://example.com/?foo=val1&bar=val2">
 #         A link
 # </a>
 
Subclassing ``HTMLFormatter`` or ``XMLFormatter`` will give you even
more control over the output. For example, Beautiful Soup sorts the
attributes in every tag by default::

 attr_soup = BeautifulSoup(b'<p z="1" m="2" a="3"></p>', 'html.parser')
 print(attr_soup.p.encode())
 # <p a="3" m="2" z="1"></p>

To turn this off, you can subclass the ``Formatter.attributes()``
method, which controls which attributes are output and in what
order. This implementation also filters out the attribute called "m"
whenever it appears::

 class UnsortedAttributes(HTMLFormatter):
     def attributes(self, tag):
         for k, v in tag.attrs.items():
             if k == 'm':
                 continue
             yield k, v
 
 print(attr_soup.p.encode(formatter=UnsortedAttributes())) 
 # <p z="1" a="3"></p>

One last caveat: if you create a ``CData`` object, the text inside
that object is always presented `exactly as it appears, with no
formatting`. Beautiful Soup will call your entity substitution
function, just in case you've written a custom function that counts
all the strings in the document or something, but it will ignore the
return value::

 from bs4.element import CData
 soup = BeautifulSoup("<a></a>", 'html.parser')
 soup.a.string = CData("one < three")
 print(soup.a.prettify(formatter="html"))
 # <a>
 #  <![CDATA[one < three]]>
 # </a>


``get_text()``
--------------

If you only want the human-readable text inside a document or tag, you can use the
``get_text()`` method. It returns all the text in a document or
beneath a tag, as a single Unicode string::

 markup = '<a href="http://example.com/">\nI linked to <i>example.com</i>\n</a>'
 soup = BeautifulSoup(markup, 'html.parser')

 soup.get_text()
 '\nI linked to example.com\n'
 soup.i.get_text()
 'example.com'

You can specify a string to be used to join the bits of text
together::

 # soup.get_text("|")
 '\nI linked to |example.com|\n'

You can tell Beautiful Soup to strip whitespace from the beginning and
end of each bit of text::

 # soup.get_text("|", strip=True)
 'I linked to|example.com'

But at that point you might want to use the :ref:`.stripped_strings <string-generators>`
generator instead, and process the text yourself::

 [text for text in soup.stripped_strings]
 # ['I linked to', 'example.com']

*As of Beautiful Soup version 4.9.0, when lxml or html.parser are in
use, the contents of <script>, <style>, and <template>
tags are generally not considered to be 'text', since those tags are not part of
the human-visible content of the page.*

*As of Beautiful Soup version 4.10.0, you can call get_text(),
.strings, or .stripped_strings on a NavigableString object. It will
either return the object itself, or nothing, so the only reason to do
this is when you're iterating over a mixed list.*

 
Specifying the parser to use
============================

If you just need to parse some HTML, you can dump the markup into the
``BeautifulSoup`` constructor, and it'll probably be fine. Beautiful
Soup will pick a parser for you and parse the data. But there are a
few additional arguments you can pass in to the constructor to change
which parser is used.

The first argument to the ``BeautifulSoup`` constructor is a string or
an open filehandle--the markup you want parsed. The second argument is
`how` you'd like the markup parsed.

If you don't specify anything, you'll get the best HTML parser that's
installed. Beautiful Soup ranks lxml's parser as being the best, then
html5lib's, then Python's built-in parser. You can override this by
specifying one of the following:

* What type of markup you want to parse. Currently supported are
  "html", "xml", and "html5".

* The name of the parser library you want to use. Currently supported
  options are "lxml", "html5lib", and "html.parser" (Python's
  built-in HTML parser).

The section `Installing a parser`_ contrasts the supported parsers.

If you don't have an appropriate parser installed, Beautiful Soup will
ignore your request and pick a different parser. Right now, the only
supported XML parser is lxml. If you don't have lxml installed, asking
for an XML parser won't give you one, and asking for "lxml" won't work
either.

Differences between parsers
---------------------------

Beautiful Soup presents the same interface to a number of different
parsers, but each parser is different. Different parsers will create
different parse trees from the same document. The biggest differences
are between the HTML parsers and the XML parsers. Here's a short
document, parsed as HTML using the parser that comes with Python::

 BeautifulSoup("<a><b/></a>", "html.parser")
 # <a><b></b></a>

Since a standalone <b/> tag is not valid HTML, html.parser turns it into
a <b></b> tag pair.

Here's the same document parsed as XML (running this requires that you
have lxml installed). Note that the standalone <b/> tag is left alone, and
that the document is given an XML declaration instead of being put
into an <html> tag.::

 print(BeautifulSoup("<a><b/></a>", "xml"))
 # <?xml version="1.0" encoding="utf-8"?>
 # <a><b/></a>

There are also differences between HTML parsers. If you give Beautiful
Soup a perfectly-formed HTML document, these differences won't
matter. One parser will be faster than another, but they'll all give
you a data structure that looks exactly like the original HTML
document.

But if the document is not perfectly-formed, different parsers will
give different results. Here's a short, invalid document parsed using
lxml's HTML parser. Note that the <a> tag gets wrapped in <body> and
<html> tags, and the dangling </p> tag is simply ignored::

 BeautifulSoup("<a></p>", "lxml")
 # <html><body><a></a></body></html>

Here's the same document parsed using html5lib::

 BeautifulSoup("<a></p>", "html5lib")
 # <html><head></head><body><a><p></p></a></body></html>

Instead of ignoring the dangling </p> tag, html5lib pairs it with an
opening <p> tag. html5lib also adds an empty <head> tag; lxml didn't
bother.

Here's the same document parsed with Python's built-in HTML
parser::

 BeautifulSoup("<a></p>", "html.parser")
 # <a></a>

Like lxml, this parser ignores the closing </p> tag. Unlike
html5lib or lxml, this parser makes no attempt to create a
well-formed HTML document by adding <html> or <body> tags.

Since the document "<a></p>" is invalid, none of these techniques is
the 'correct' way to handle it. The html5lib parser uses techniques
that are part of the HTML5 standard, so it has the best claim on being
the 'correct' way, but all three techniques are legitimate.

Differences between parsers can affect your script. If you're planning
on distributing your script to other people, or running it on multiple
machines, you should specify a parser in the ``BeautifulSoup``
constructor. That will reduce the chances that your users parse a
document differently from the way you parse it.

Encodings
=========

Any HTML or XML document is written in a specific encoding like ASCII
or UTF-8.  But when you load that document into Beautiful Soup, you'll
discover it's been converted to Unicode::

 markup = "<h1>Sacr\xc3\xa9 bleu!</h1>"
 soup = BeautifulSoup(markup, 'html.parser')
 soup.h1
 # <h1>Sacré bleu!</h1>
 soup.h1.string
 # 'Sacr\xe9 bleu!'

It's not magic. (That sure would be nice.) Beautiful Soup uses a
sub-library called `Unicode, Dammit`_ to detect a document's encoding
and convert it to Unicode. The autodetected encoding is available as
the ``.original_encoding`` attribute of the ``BeautifulSoup`` object::

 soup.original_encoding
 'utf-8'

Unicode, Dammit guesses correctly most of the time, but sometimes it
makes mistakes. Sometimes it guesses correctly, but only after a
byte-by-byte search of the document that takes a very long time. If
you happen to know a document's encoding ahead of time, you can avoid
mistakes and delays by passing it to the ``BeautifulSoup`` constructor
as ``from_encoding``.

Here's a document written in ISO-8859-8. The document is so short that
Unicode, Dammit can't get a lock on it, and misidentifies it as
ISO-8859-7::

 markup = b"<h1>\xed\xe5\xec\xf9</h1>"
 soup = BeautifulSoup(markup, 'html.parser')
 print(soup.h1)
 # <h1>νεμω</h1>
 print(soup.original_encoding)
 # iso-8859-7

We can fix this by passing in the correct ``from_encoding``::

 soup = BeautifulSoup(markup, 'html.parser', from_encoding="iso-8859-8")
 print(soup.h1)
 # <h1>םולש</h1>
 print(soup.original_encoding)
 # iso8859-8

If you don't know what the correct encoding is, but you know that
Unicode, Dammit is guessing wrong, you can pass the wrong guesses in
as ``exclude_encodings``::

 soup = BeautifulSoup(markup, 'html.parser', exclude_encodings=["iso-8859-7"])
 print(soup.h1)
 # <h1>םולש</h1>
 print(soup.original_encoding)
 # WINDOWS-1255

Windows-1255 isn't 100% correct, but that encoding is a compatible
superset of ISO-8859-8, so it's close enough. (``exclude_encodings``
is a new feature in Beautiful Soup 4.4.0.)

In rare cases (usually when a UTF-8 document contains text written in
a completely different encoding), the only way to get Unicode may be
to replace some characters with the special Unicode character
"REPLACEMENT CHARACTER" (U+FFFD, �). If Unicode, Dammit needs to do
this, it will set the ``.contains_replacement_characters`` attribute
to ``True`` on the ``UnicodeDammit`` or ``BeautifulSoup`` object. This
lets you know that the Unicode representation is not an exact
representation of the original--some data was lost. If a document
contains �, but ``.contains_replacement_characters`` is ``False``,
you'll know that the � was there originally (as it is in this
paragraph) and doesn't stand in for missing data.

Output encoding
---------------

When you write out a document from Beautiful Soup, you get a UTF-8
document, even if the document wasn't in UTF-8 to begin with. Here's a
document written in the Latin-1 encoding::

 markup = b'''
  <html>
   <head>
    <meta content="text/html; charset=ISO-Latin-1" http-equiv="Content-type" />
   </head>
   <body>
    <p>Sacr\xe9 bleu!</p>
   </body>
  </html>
 '''

 soup = BeautifulSoup(markup, 'html.parser')
 print(soup.prettify())
 # <html>
 #  <head>
 #   <meta content="text/html; charset=utf-8" http-equiv="Content-type" />
 #  </head>
 #  <body>
 #   <p>
 #    Sacré bleu!
 #   </p>
 #  </body>
 # </html>

Note that the <meta> tag has been rewritten to reflect the fact that
the document is now in UTF-8.

If you don't want UTF-8, you can pass an encoding into ``prettify()``::

 print(soup.prettify("latin-1"))
 # <html>
 #  <head>
 #   <meta content="text/html; charset=latin-1" http-equiv="Content-type" />
 # ...

You can also call encode() on the ``BeautifulSoup`` object, or any
element in the soup, just as if it were a Python string::

 soup.p.encode("latin-1")
 # b'<p>Sacr\xe9 bleu!</p>'

 soup.p.encode("utf-8")
 # b'<p>Sacr\xc3\xa9 bleu!</p>'

Any characters that can't be represented in your chosen encoding will
be converted into numeric XML entity references. Here's a document
that includes the Unicode character SNOWMAN::

 markup = u"<b>\N{SNOWMAN}</b>"
 snowman_soup = BeautifulSoup(markup, 'html.parser')
 tag = snowman_soup.b

The SNOWMAN character can be part of a UTF-8 document (it looks like
☃), but there's no representation for that character in ISO-Latin-1 or
ASCII, so it's converted into "&#9731" for those encodings::

 print(tag.encode("utf-8"))
 # b'<b>\xe2\x98\x83</b>'

 print(tag.encode("latin-1"))
 # b'<b>&#9731;</b>'

 print(tag.encode("ascii"))
 # b'<b>&#9731;</b>'

Unicode, Dammit
---------------

You can use Unicode, Dammit without using Beautiful Soup. It's useful
whenever you have data in an unknown encoding and you just want it to
become Unicode::

 from bs4 import UnicodeDammit
 dammit = UnicodeDammit("Sacr\xc3\xa9 bleu!")
 print(dammit.unicode_markup)
 # Sacré bleu!
 dammit.original_encoding
 # 'utf-8'

Unicode, Dammit's guesses will get a lot more accurate if you install
one of these Python libraries: ``charset-normalizer``, ``chardet``, or
``cchardet``. The more data you give Unicode, Dammit, the more
accurately it will guess. If you have your own suspicions as to what
the encoding might be, you can pass them in as a list::

 dammit = UnicodeDammit("Sacr\xe9 bleu!", ["latin-1", "iso-8859-1"])
 print(dammit.unicode_markup)
 # Sacré bleu!
 dammit.original_encoding
 # 'latin-1'

Unicode, Dammit has two special features that Beautiful Soup doesn't
use.

Smart quotes
^^^^^^^^^^^^

You can use Unicode, Dammit to convert Microsoft smart quotes to HTML or XML
entities::

 markup = b"<p>I just \x93love\x94 Microsoft Word\x92s smart quotes</p>"

 UnicodeDammit(markup, ["windows-1252"], smart_quotes_to="html").unicode_markup
 # '<p>I just &ldquo;love&rdquo; Microsoft Word&rsquo;s smart quotes</p>'

 UnicodeDammit(markup, ["windows-1252"], smart_quotes_to="xml").unicode_markup
 # '<p>I just &#x201C;love&#x201D; Microsoft Word&#x2019;s smart quotes</p>'

You can also convert Microsoft smart quotes to ASCII quotes::

 UnicodeDammit(markup, ["windows-1252"], smart_quotes_to="ascii").unicode_markup
 # '<p>I just "love" Microsoft Word\'s smart quotes</p>'

Hopefully you'll find this feature useful, but Beautiful Soup doesn't
use it. Beautiful Soup prefers the default behavior, which is to
convert Microsoft smart quotes to Unicode characters along with
everything else::

 UnicodeDammit(markup, ["windows-1252"]).unicode_markup
 # '<p>I just “love” Microsoft Word’s smart quotes</p>'

Inconsistent encodings
^^^^^^^^^^^^^^^^^^^^^^

Sometimes a document is mostly in UTF-8, but contains Windows-1252
characters such as (again) Microsoft smart quotes. This can happen
when a website includes data from multiple sources. You can use
``UnicodeDammit.detwingle()`` to turn such a document into pure
UTF-8. Here's a simple example::

 snowmen = (u"\N{SNOWMAN}" * 3)
 quote = (u"\N{LEFT DOUBLE QUOTATION MARK}I like snowmen!\N{RIGHT DOUBLE QUOTATION MARK}")
 doc = snowmen.encode("utf8") + quote.encode("windows_1252")

This document is a mess. The snowmen are in UTF-8 and the quotes are
in Windows-1252. You can display the snowmen or the quotes, but not
both::

 print(doc)
 # ☃☃☃�I like snowmen!�

 print(doc.decode("windows-1252"))
 # â˜ƒâ˜ƒâ˜ƒ“I like snowmen!”

Decoding the document as UTF-8 raises a ``UnicodeDecodeError``, and
decoding it as Windows-1252 gives you gibberish. Fortunately,
``UnicodeDammit.detwingle()`` will convert the string to pure UTF-8,
allowing you to decode it to Unicode and display the snowmen and quote
marks simultaneously::

 new_doc = UnicodeDammit.detwingle(doc)
 print(new_doc.decode("utf8"))
 # ☃☃☃“I like snowmen!”

``UnicodeDammit.detwingle()`` only knows how to handle Windows-1252
embedded in UTF-8 (or vice versa, I suppose), but this is the most
common case.

Note that you must know to call ``UnicodeDammit.detwingle()`` on your
data before passing it into ``BeautifulSoup`` or the ``UnicodeDammit``
constructor. Beautiful Soup assumes that a document has a single
encoding, whatever it might be. If you pass it a document that
contains both UTF-8 and Windows-1252, it's likely to think the whole
document is Windows-1252, and the document will come out looking like
``â˜ƒâ˜ƒâ˜ƒ“I like snowmen!”``.

``UnicodeDammit.detwingle()`` is new in Beautiful Soup 4.1.0.

Line numbers
============

The ``html.parser`` and ``html5lib`` parsers can keep track of where in
the original document each Tag was found. You can access this
information as ``Tag.sourceline`` (line number) and ``Tag.sourcepos``
(position of the start tag within a line)::

 markup = "<p\n>Paragraph 1</p>\n    <p>Paragraph 2</p>"
 soup = BeautifulSoup(markup, 'html.parser')
 for tag in soup.find_all('p'):
     print(repr((tag.sourceline, tag.sourcepos, tag.string)))
 # (1, 0, 'Paragraph 1')
 # (3, 4, 'Paragraph 2')

Note that the two parsers mean slightly different things by
``sourceline`` and ``sourcepos``. For html.parser, these numbers
represent the position of the initial less-than sign. For html5lib,
these numbers represent the position of the final greater-than sign::
   
 soup = BeautifulSoup(markup, 'html5lib')
 for tag in soup.find_all('p'):
     print(repr((tag.sourceline, tag.sourcepos, tag.string)))
 # (2, 0, 'Paragraph 1')
 # (3, 6, 'Paragraph 2')

You can shut off this feature by passing ``store_line_numbers=False`
into the ``BeautifulSoup`` constructor::

 markup = "<p\n>Paragraph 1</p>\n    <p>Paragraph 2</p>"
 soup = BeautifulSoup(markup, 'html.parser', store_line_numbers=False)
 print(soup.p.sourceline)
 # None
  
`This feature is new in 4.8.1, and the parsers based on lxml don't
support it.`

Comparing objects for equality
==============================

Beautiful Soup says that two ``NavigableString`` or ``Tag`` objects
are equal when they represent the same HTML or XML markup. In this
example, the two <b> tags are treated as equal, even though they live
in different parts of the object tree, because they both look like
"<b>pizza</b>"::

 markup = "<p>I want <b>pizza</b> and more <b>pizza</b>!</p>"
 soup = BeautifulSoup(markup, 'html.parser')
 first_b, second_b = soup.find_all('b')
 print(first_b == second_b)
 # True

 print(first_b.previous_element == second_b.previous_element)
 # False

If you want to see whether two variables refer to exactly the same
object, use `is`::

 print(first_b is second_b)
 # False

Copying Beautiful Soup objects
==============================

You can use ``copy.copy()`` to create a copy of any ``Tag`` or
``NavigableString``::

 import copy
 p_copy = copy.copy(soup.p)
 print(p_copy)
 # <p>I want <b>pizza</b> and more <b>pizza</b>!</p>

The copy is considered equal to the original, since it represents the
same markup as the original, but it's not the same object::

 print(soup.p == p_copy)
 # True

 print(soup.p is p_copy)
 # False

The only real difference is that the copy is completely detached from
the original Beautiful Soup object tree, just as if ``extract()`` had
been called on it::

 print(p_copy.parent)
 # None

This is because two different ``Tag`` objects can't occupy the same
space at the same time.

Advanced parser customization
=============================

Beautiful Soup offers a number of ways to customize how the parser
treats incoming HTML and XML. This section covers the most commonly
used customization techniques.

Parsing only part of a document
-------------------------------

Let's say you want to use Beautiful Soup look at a document's <a>
tags. It's a waste of time and memory to parse the entire document and
then go over it again looking for <a> tags. It would be much faster to
ignore everything that wasn't an <a> tag in the first place. The
``SoupStrainer`` class allows you to choose which parts of an incoming
document are parsed. You just create a ``SoupStrainer`` and pass it in
to the ``BeautifulSoup`` constructor as the ``parse_only`` argument.

(Note that *this feature won't work if you're using the html5lib parser*.
If you use html5lib, the whole document will be parsed, no
matter what. This is because html5lib constantly rearranges the parse
tree as it works, and if some part of the document didn't actually
make it into the parse tree, it'll crash. To avoid confusion, in the
examples below I'll be forcing Beautiful Soup to use Python's
built-in parser.)

``SoupStrainer``
^^^^^^^^^^^^^^^^

The ``SoupStrainer`` class takes the same arguments as a typical
method from `Searching the tree`_: :ref:`name <name>`, :ref:`attrs
<attrs>`, :ref:`string <string>`, and :ref:`**kwargs <kwargs>`. Here are
three ``SoupStrainer`` objects::

 from bs4 import SoupStrainer

 only_a_tags = SoupStrainer("a")

 only_tags_with_id_link2 = SoupStrainer(id="link2")

 def is_short_string(string):
     return string is not None and len(string) < 10

 only_short_strings = SoupStrainer(string=is_short_string)

I'm going to bring back the "three sisters" document one more time,
and we'll see what the document looks like when it's parsed with these
three ``SoupStrainer`` objects::

 html_doc = """<html><head><title>The Dormouse's story</title></head>
 <body>
 <p class="title"><b>The Dormouse's story</b></p>

 <p class="story">Once upon a time there were three little sisters; and their names were
 <a href="http://example.com/elsie" class="sister" id="link1">Elsie</a>,
 <a href="http://example.com/lacie" class="sister" id="link2">Lacie</a> and
 <a href="http://example.com/tillie" class="sister" id="link3">Tillie</a>;
 and they lived at the bottom of a well.</p>

 <p class="story">...</p>
 """

 print(BeautifulSoup(html_doc, "html.parser", parse_only=only_a_tags).prettify())
 # <a class="sister" href="http://example.com/elsie" id="link1">
 #  Elsie
 # </a>
 # <a class="sister" href="http://example.com/lacie" id="link2">
 #  Lacie
 # </a>
 # <a class="sister" href="http://example.com/tillie" id="link3">
 #  Tillie
 # </a>

 print(BeautifulSoup(html_doc, "html.parser", parse_only=only_tags_with_id_link2).prettify())
 # <a class="sister" href="http://example.com/lacie" id="link2">
 #  Lacie
 # </a>

 print(BeautifulSoup(html_doc, "html.parser", parse_only=only_short_strings).prettify())
 # Elsie
 # ,
 # Lacie
 # and
 # Tillie
 # ...
 #

You can also pass a ``SoupStrainer`` into any of the methods covered
in `Searching the tree`_. This probably isn't terribly useful, but I
thought I'd mention it::

 soup = BeautifulSoup(html_doc, 'html.parser')
 soup.find_all(only_short_strings)
 # ['\n\n', '\n\n', 'Elsie', ',\n', 'Lacie', ' and\n', 'Tillie',
 #  '\n\n', '...', '\n']

Customizing multi-valued attributes
-----------------------------------

In an HTML document, an attribute like ``class`` is given a list of
values, and an attribute like ``id`` is given a single value, because
the HTML specification treats those attributes differently::

 markup = '<a class="cls1 cls2" id="id1 id2">'
 soup = BeautifulSoup(markup, 'html.parser')
 soup.a['class']
 # ['cls1', 'cls2']
 soup.a['id']
 # 'id1 id2'

You can turn this off by passing in
``multi_valued_attributes=None``. Than all attributes will be given a
single value::

 soup = BeautifulSoup(markup, 'html.parser', multi_valued_attributes=None)
 soup.a['class']
 # 'cls1 cls2'
 soup.a['id']
 # 'id1 id2'

You can customize this behavior quite a bit by passing in a
dictionary for ``multi_valued_attributes``. If you need this, look at
``HTMLTreeBuilder.DEFAULT_CDATA_LIST_ATTRIBUTES`` to see the
configuration Beautiful Soup uses by default, which is based on the
HTML specification.

`(This is a new feature in Beautiful Soup 4.8.0.)`

Handling duplicate attributes
-----------------------------

When using the ``html.parser`` parser, you can use the
``on_duplicate_attribute`` constructor argument to customize what
Beautiful Soup does when it encounters a tag that defines the same
attribute more than once::

 markup = '<a href="http://url1/" href="http://url2/">'

The default behavior is to use the last value found for the tag::

 soup = BeautifulSoup(markup, 'html.parser')
 soup.a['href']
 # http://url2/

 soup = BeautifulSoup(markup, 'html.parser', on_duplicate_attribute='replace')
 soup.a['href']
 # http://url2/
  
With ``on_duplicate_attribute='ignore'`` you can tell Beautiful Soup
to use the `first` value found and ignore the rest::

 soup = BeautifulSoup(markup, 'html.parser', on_duplicate_attribute='ignore')
 soup.a['href']
 # http://url1/

(lxml and html5lib always do it this way; their behavior can't be
configured from within Beautiful Soup.)

If you need more, you can pass in a function that's called on each duplicate value::

 def accumulate(attributes_so_far, key, value):
     if not isinstance(attributes_so_far[key], list):
         attributes_so_far[key] = [attributes_so_far[key]]
     attributes_so_far[key].append(value)

 soup = BeautifulSoup(markup, 'html.parser', on_duplicate_attribute=accumulate)
 soup.a['href']
 # ["http://url1/", "http://url2/"]

`(This is a new feature in Beautiful Soup 4.9.1.)`

Instantiating custom subclasses
-------------------------------

When a parser tells Beautiful Soup about a tag or a string, Beautiful
Soup will instantiate a ``Tag`` or ``NavigableString`` object to
contain that information. Instead of that default behavior, you can
tell Beautiful Soup to instantiate `subclasses` of ``Tag`` or
``NavigableString``, subclasses you define with custom behavior::

 from bs4 import Tag, NavigableString
 class MyTag(Tag):
     pass


 class MyString(NavigableString):
     pass


 markup = "<div>some text</div>"
 soup = BeautifulSoup(markup, 'html.parser')
 isinstance(soup.div, MyTag)
 # False
 isinstance(soup.div.string, MyString)
 # False 

 my_classes = { Tag: MyTag, NavigableString: MyString }
 soup = BeautifulSoup(markup, 'html.parser', element_classes=my_classes)
 isinstance(soup.div, MyTag)
 # True
 isinstance(soup.div.string, MyString)
 # True  

This can be useful when incorporating Beautiful Soup into a test
framework.

`(This is a new feature in Beautiful Soup 4.8.1.)`

Troubleshooting
===============

.. _diagnose:

``diagnose()``
--------------

If you're having trouble understanding what Beautiful Soup does to a
document, pass the document into the ``diagnose()`` function. (New in
Beautiful Soup 4.2.0.)  Beautiful Soup will print out a report showing
you how different parsers handle the document, and tell you if you're
missing a parser that Beautiful Soup could be using::

 from bs4.diagnose import diagnose
 with open("bad.html") as fp:
     data = fp.read()

 diagnose(data)

 # Diagnostic running on Beautiful Soup 4.2.0
 # Python version 2.7.3 (default, Aug  1 2012, 05:16:07)
 # I noticed that html5lib is not installed. Installing it may help.
 # Found lxml version 2.3.2.0
 #
 # Trying to parse your data with html.parser
 # Here's what html.parser did with the document:
 # ...

Just looking at the output of diagnose() may show you how to solve the
problem. Even if not, you can paste the output of ``diagnose()`` when
asking for help.

Errors when parsing a document
------------------------------

There are two different kinds of parse errors. There are crashes,
where you feed a document to Beautiful Soup and it raises an
exception, usually an ``HTMLParser.HTMLParseError``. And there is
unexpected behavior, where a Beautiful Soup parse tree looks a lot
different than the document used to create it.

Almost none of these problems turn out to be problems with Beautiful
Soup. This is not because Beautiful Soup is an amazingly well-written
piece of software. It's because Beautiful Soup doesn't include any
parsing code. Instead, it relies on external parsers. If one parser
isn't working on a certain document, the best solution is to try a
different parser. See `Installing a parser`_ for details and a parser
comparison.

The most common parse errors are ``HTMLParser.HTMLParseError:
malformed start tag`` and ``HTMLParser.HTMLParseError: bad end
tag``. These are both generated by Python's built-in HTML parser
library, and the solution is to :ref:`install lxml or
html5lib. <parser-installation>`

The most common type of unexpected behavior is that you can't find a
tag that you know is in the document. You saw it going in, but
``find_all()`` returns ``[]`` or ``find()`` returns ``None``. This is
another common problem with Python's built-in HTML parser, which
sometimes skips tags it doesn't understand.  Again, the best solution is to
:ref:`install lxml or html5lib. <parser-installation>`

Version mismatch problems
-------------------------

* ``SyntaxError: Invalid syntax`` (on the line ``ROOT_TAG_NAME =
  '[document]'``): Caused by running an old Python 2 version of
  Beautiful Soup under Python 3, without converting the code.

* ``ImportError: No module named HTMLParser`` - Caused by running an old
  Python 2 version of Beautiful Soup under Python 3.

* ``ImportError: No module named html.parser`` - Caused by running the
  Python 3 version of Beautiful Soup under Python 2.

* ``ImportError: No module named BeautifulSoup`` - Caused by running
  Beautiful Soup 3 code on a system that doesn't have BS3
  installed. Or, by writing Beautiful Soup 4 code without knowing that
  the package name has changed to ``bs4``.

* ``ImportError: No module named bs4`` - Caused by running Beautiful
  Soup 4 code on a system that doesn't have BS4 installed.

.. _parsing-xml:

Parsing XML
-----------

By default, Beautiful Soup parses documents as HTML. To parse a
document as XML, pass in "xml" as the second argument to the
``BeautifulSoup`` constructor::

 soup = BeautifulSoup(markup, "xml")

You'll need to :ref:`have lxml installed <parser-installation>`.

Other parser problems
---------------------

* If your script works on one computer but not another, or in one
  virtual environment but not another, or outside the virtual
  environment but not inside, it's probably because the two
  environments have different parser libraries available. For example,
  you may have developed the script on a computer that has lxml
  installed, and then tried to run it on a computer that only has
  html5lib installed. See `Differences between parsers`_ for why this
  matters, and fix the problem by mentioning a specific parser library
  in the ``BeautifulSoup`` constructor.

* Because `HTML tags and attributes are case-insensitive
  <http://www.w3.org/TR/html5/syntax.html#syntax>`_, all three HTML
  parsers convert tag and attribute names to lowercase. That is, the
  markup <TAG></TAG> is converted to <tag></tag>. If you want to
  preserve mixed-case or uppercase tags and attributes, you'll need to
  :ref:`parse the document as XML. <parsing-xml>`

.. _misc:

Miscellaneous
-------------

* ``UnicodeEncodeError: 'charmap' codec can't encode character
  '\xfoo' in position bar`` (or just about any other
  ``UnicodeEncodeError``) - This problem shows up in two main
  situations. First, when you try to print a Unicode character that
  your console doesn't know how to display. (See `this page on the
  Python wiki <http://wiki.python.org/moin/PrintFails>`_ for help.)
  Second, when you're writing to a file and you pass in a Unicode
  character that's not supported by your default encoding.  In this
  case, the simplest solution is to explicitly encode the Unicode
  string into UTF-8 with ``u.encode("utf8")``.

* ``KeyError: [attr]`` - Caused by accessing ``tag['attr']`` when the
  tag in question doesn't define the ``attr`` attribute. The most
  common errors are ``KeyError: 'href'`` and ``KeyError: 'class'``.
  Use ``tag.get('attr')`` if you're not sure ``attr`` is
  defined, just as you would with a Python dictionary.

* ``AttributeError: 'ResultSet' object has no attribute 'foo'`` - This
  usually happens because you expected ``find_all()`` to return a
  single tag or string. But ``find_all()`` returns a _list_ of tags
  and strings--a ``ResultSet`` object. You need to iterate over the
  list and look at the ``.foo`` of each one. Or, if you really only
  want one result, you need to use ``find()`` instead of
  ``find_all()``.

* ``AttributeError: 'NoneType' object has no attribute 'foo'`` - This
  usually happens because you called ``find()`` and then tried to
  access the `.foo`` attribute of the result. But in your case,
  ``find()`` didn't find anything, so it returned ``None``, instead of
  returning a tag or a string. You need to figure out why your
  ``find()`` call isn't returning anything.

* ``AttributeError: 'NavigableString' object has no attribute
  'foo'`` - This usually happens because you're treating a string as
  though it were a tag. You may be iterating over a list, expecting
  that it contains nothing but tags, when it actually contains both tags and
  strings.


Improving Performance
---------------------

Beautiful Soup will never be as fast as the parsers it sits on top
of. If response time is critical, if you're paying for computer time
by the hour, or if there's any other reason why computer time is more
valuable than programmer time, you should forget about Beautiful Soup
and work directly atop `lxml <http://lxml.de/>`_.

That said, there are things you can do to speed up Beautiful Soup. If
you're not using lxml as the underlying parser, my advice is to
:ref:`start <parser-installation>`. Beautiful Soup parses documents
significantly faster using lxml than using html.parser or html5lib.

You can speed up encoding detection significantly by installing the
`cchardet <http://pypi.python.org/pypi/cchardet/>`_ library.

`Parsing only part of a document`_ won't save you much time parsing
the document, but it can save a lot of memory, and it'll make
`searching` the document much faster.

Translating this documentation
==============================

New translations of the Beautiful Soup documentation are greatly
appreciated. Translations should be licensed under the MIT license,
just like Beautiful Soup and its English documentation are.

There are two ways of getting your translation into the main code base
and onto the Beautiful Soup website:

1. Create a branch of the Beautiful Soup repository, add your
   translation, and propose a merge with the main branch, the same
   as you would do with a proposed change to the source code.
2. Send a message to the Beautiful Soup discussion group with a link to
   your translation, or attach your translation to the message.

Use the Chinese or Brazilian Portuguese translations as your model. In
particular, please translate the source file ``doc/source/index.rst``,
rather than the HTML version of the documentation. This makes it
possible to publish the documentation in a variety of formats, not
just HTML.

Beautiful Soup 3
================

Beautiful Soup 3 is the previous release series, and is no longer
being actively developed. It's currently packaged with all major Linux
distributions:

:kbd:`$ apt-get install python-beautifulsoup`

It's also published through PyPi as ``BeautifulSoup``.:

:kbd:`$ easy_install BeautifulSoup`

:kbd:`$ pip install BeautifulSoup`

You can also `download a tarball of Beautiful Soup 3.2.0
<http://www.crummy.com/software/BeautifulSoup/bs3/download/3.x/BeautifulSoup-3.2.0.tar.gz>`_.

If you ran ``easy_install beautifulsoup`` or ``easy_install
BeautifulSoup``, but your code doesn't work, you installed Beautiful
Soup 3 by mistake. You need to run ``easy_install beautifulsoup4``.

`The documentation for Beautiful Soup 3 is archived online
<http://www.crummy.com/software/BeautifulSoup/bs3/documentation.html>`_.

Porting code to BS4
-------------------

Most code written against Beautiful Soup 3 will work against Beautiful
Soup 4 with one simple change. All you should have to do is change the
package name from ``BeautifulSoup`` to ``bs4``. So this::

 from BeautifulSoup import BeautifulSoup

becomes this::

 from bs4 import BeautifulSoup

* If you get the ``ImportError`` "No module named BeautifulSoup", your
  problem is that you're trying to run Beautiful Soup 3 code, but you
  only have Beautiful Soup 4 installed.

* If you get the ``ImportError`` "No module named bs4", your problem
  is that you're trying to run Beautiful Soup 4 code, but you only
  have Beautiful Soup 3 installed.

Although BS4 is mostly backwards-compatible with BS3, most of its
methods have been deprecated and given new names for `PEP 8 compliance
<http://www.python.org/dev/peps/pep-0008/>`_. There are numerous other
renames and changes, and a few of them break backwards compatibility.

Here's what you'll need to know to convert your BS3 code and habits to BS4:

You need a parser
^^^^^^^^^^^^^^^^^

Beautiful Soup 3 used Python's ``SGMLParser``, a module that was
deprecated and removed in Python 3.0. Beautiful Soup 4 uses
``html.parser`` by default, but you can plug in lxml or html5lib and
use that instead. See `Installing a parser`_ for a comparison.

Since ``html.parser`` is not the same parser as ``SGMLParser``, you
may find that Beautiful Soup 4 gives you a different parse tree than
Beautiful Soup 3 for the same markup. If you swap out ``html.parser``
for lxml or html5lib, you may find that the parse tree changes yet
again. If this happens, you'll need to update your scraping code to
deal with the new tree.

Method names
^^^^^^^^^^^^

* ``renderContents`` -> ``encode_contents``
* ``replaceWith`` -> ``replace_with``
* ``replaceWithChildren`` -> ``unwrap``
* ``findAll`` -> ``find_all``
* ``findAllNext`` -> ``find_all_next``
* ``findAllPrevious`` -> ``find_all_previous``
* ``findNext`` -> ``find_next``
* ``findNextSibling`` -> ``find_next_sibling``
* ``findNextSiblings`` -> ``find_next_siblings``
* ``findParent`` -> ``find_parent``
* ``findParents`` -> ``find_parents``
* ``findPrevious`` -> ``find_previous``
* ``findPreviousSibling`` -> ``find_previous_sibling``
* ``findPreviousSiblings`` -> ``find_previous_siblings``
* ``getText`` -> ``get_text``
* ``nextSibling`` -> ``next_sibling``
* ``previousSibling`` -> ``previous_sibling``

Some arguments to the Beautiful Soup constructor were renamed for the
same reasons:

* ``BeautifulSoup(parseOnlyThese=...)`` -> ``BeautifulSoup(parse_only=...)``
* ``BeautifulSoup(fromEncoding=...)`` -> ``BeautifulSoup(from_encoding=...)``

I renamed one method for compatibility with Python 3:

* ``Tag.has_key()`` -> ``Tag.has_attr()``

I renamed one attribute to use more accurate terminology:

* ``Tag.isSelfClosing`` -> ``Tag.is_empty_element``

I renamed three attributes to avoid using words that have special
meaning to Python. Unlike the others, these changes are *not backwards
compatible.* If you used these attributes in BS3, your code will break
on BS4 until you change them.

* ``UnicodeDammit.unicode`` -> ``UnicodeDammit.unicode_markup``
* ``Tag.next`` -> ``Tag.next_element``
* ``Tag.previous`` -> ``Tag.previous_element``

These methods are left over from the Beautiful Soup 2 API. They've
been deprecated since 2006, and should not be used at all:

* ``Tag.fetchNextSiblings``
* ``Tag.fetchPreviousSiblings``
* ``Tag.fetchPrevious``
* ``Tag.fetchPreviousSiblings``
* ``Tag.fetchParents``
* ``Tag.findChild``
* ``Tag.findChildren``


Generators
^^^^^^^^^^

I gave the generators PEP 8-compliant names, and transformed them into
properties:

* ``childGenerator()`` -> ``children``
* ``nextGenerator()`` -> ``next_elements``
* ``nextSiblingGenerator()`` -> ``next_siblings``
* ``previousGenerator()`` -> ``previous_elements``
* ``previousSiblingGenerator()`` -> ``previous_siblings``
* ``recursiveChildGenerator()`` -> ``descendants``
* ``parentGenerator()`` -> ``parents``

So instead of this::

 for parent in tag.parentGenerator():
     ...

You can write this::

 for parent in tag.parents:
     ...

(But the old code will still work.)

Some of the generators used to yield ``None`` after they were done, and
then stop. That was a bug. Now the generators just stop.

There are two new generators, :ref:`.strings and
.stripped_strings <string-generators>`. ``.strings`` yields
NavigableString objects, and ``.stripped_strings`` yields Python
strings that have had whitespace stripped.

XML
^^^

There is no longer a ``BeautifulStoneSoup`` class for parsing XML. To
parse XML you pass in "xml" as the second argument to the
``BeautifulSoup`` constructor. For the same reason, the
``BeautifulSoup`` constructor no longer recognizes the ``isHTML``
argument.

Beautiful Soup's handling of empty-element XML tags has been
improved. Previously when you parsed XML you had to explicitly say
which tags were considered empty-element tags. The ``selfClosingTags``
argument to the constructor is no longer recognized. Instead,
Beautiful Soup considers any empty tag to be an empty-element tag. If
you add a child to an empty-element tag, it stops being an
empty-element tag.

Entities
^^^^^^^^

An incoming HTML or XML entity is always converted into the
corresponding Unicode character. Beautiful Soup 3 had a number of
overlapping ways of dealing with entities, which have been
removed. The ``BeautifulSoup`` constructor no longer recognizes the
``smartQuotesTo`` or ``convertEntities`` arguments. (`Unicode,
Dammit`_ still has ``smart_quotes_to``, but its default is now to turn
smart quotes into Unicode.) The constants ``HTML_ENTITIES``,
``XML_ENTITIES``, and ``XHTML_ENTITIES`` have been removed, since they
configure a feature (transforming some but not all entities into
Unicode characters) that no longer exists.

If you want to turn Unicode characters back into HTML entities on
output, rather than turning them into UTF-8 characters, you need to
use an :ref:`output formatter <output_formatters>`.

Miscellaneous
^^^^^^^^^^^^^

:ref:`Tag.string <.string>` now operates recursively. If tag A
contains a single tag B and nothing else, then A.string is the same as
B.string. (Previously, it was None.)

`Multi-valued attributes`_ like ``class`` have lists of strings as
their values, not strings. This may affect the way you search by CSS
class.

``Tag`` objects now implement the ``__hash__`` method, such that two
``Tag`` objects are considered equal if they generate the same
markup. This may change your script's behavior if you put ``Tag``
objects into a dictionary or set.

If you pass one of the ``find*`` methods both :ref:`string <string>` `and`
a tag-specific argument like :ref:`name <name>`, Beautiful Soup will
search for tags that match your tag-specific criteria and whose
:ref:`Tag.string <.string>` matches your value for :ref:`string
<string>`. It will `not` find the strings themselves. Previously,
Beautiful Soup ignored the tag-specific arguments and looked for
strings.

The ``BeautifulSoup`` constructor no longer recognizes the
`markupMassage` argument. It's now the parser's responsibility to
handle markup correctly.

The rarely-used alternate parser classes like
``ICantBelieveItsBeautifulSoup`` and ``BeautifulSOAP`` have been
removed. It's now the parser's decision how to handle ambiguous
markup.

The ``prettify()`` method now returns a Unicode string, not a bytestring.