~modemmanager/modemmanager/0.6 : changes

~modemmanager/modemmanager/0.6 » Changes from revision 1253

From Revision 1253 to 1234

Rev	Summary	Authors	Tags	Date
1253	mbm: add another C5621 ID mbm: add another C5621 ID This device ID is used in a Lenovo Helix.	Jens Seidel		10 years ago
1252	huawei: try ^ICCID? to read ICCID huawei: try ^ICCID? to read ICCID	Dan Williams		10 years ago
1251	core: add helper for parsing and validating the ICCID core: add helper for parsing and validating the ICCID	Dan Williams		10 years ago
1250	serial: add debugging to serial port open failures serial: add debugging to serial port open failures	Dan Williams		10 years ago
1249	x22x: add support for Olivetti Olicard 200 x22x: add support for Olivetti Olicard 200	Dan Williams		10 years ago
1248	zte: don't send as many CPMS requests to non-AT ports zte: don't send as many CPMS requests to non-AT ports If the port command times out for two CPMS requests then it's probably not an AT port, plus the other ports that are actually AT ports will pick up the command anyway. This should cut 8 seconds off probing ZTE devices that have ports which are not AT.	Dan Williams		10 years ago
1247	release: bump version to 0.6.2.0 release: bump version to 0.6.2.0	Dan Williams	0.6.2.0	10 years ago
1246	release: update NEWS release: update NEWS	Dan Williams		10 years ago
1245	test: update info.py for new access technologies test: update info.py for new access technologies	Dan Williams		10 years ago
1244	zte: implement Band handling for Icera-based devices zte: implement Band handling for Icera-based devices	Dan Williams		10 years ago
1243	icera: fix issues checking supported bands icera: fix issues checking supported bands Icera devices include bands that the modem doesn't support in the %IPBM=? list, so the plugin sets the band to its current enabled/disabled value to test whether that band is supported. Apparently enabling a band that's already enabled isn't a NOP, and we don't want to make any changes since we're just checking whether the band is supported. So instead of enabling already- enabled bands, just assume those bands are supported and only check the disabled bands. This is a backport of 23204111130fca0a93a22508431ad8bb17210bdd	Dan Williams		10 years ago
1242	mbm: EPIN response often needs a lot of time mbm: EPIN response often needs a lot of time If the modem was locked, it'll delay responding until the SIM is ready, which can take a long time.	Dan Williams		10 years ago
1241	nokia: CS-12 appears to only accept PPP on USB interface 3 nokia: CS-12 appears to only accept PPP on USB interface 3 Attempting PPP on interface 1 never returns CONNECT, simply hangs and times out at the dial.	Dan Williams		10 years ago
1240	modem-helpers: handle commas within +COPS response items (bg... modem-helpers: handle commas within +COPS response items (bgo #701329) Modems can probably put whatever they want between the quotes for the operator name, including commas. Handle that. https://bugzilla.gnome.org/show_bug.cgi?id=701329	Dan Williams		10 years ago
1239	gsm: match PDP context type when reading existing APNs gsm: match PDP context type when reading existing APNs Otherwise it could match an IPv6 context with the same APN name, which isn't what we want since MM 0.6 doesn't support IPv6.	Dan Williams		10 years ago
1238	huawei: ignore some additional unsolicited responses huawei: ignore some additional unsolicited responses	Dan Williams		10 years ago
1237	serial-parser: detect 'NA' as a mobile equipment error serial-parser: detect 'NA' as a mobile equipment error Just treat 'NA' as MM_MOBILE_EQUIPMENT_ERROR_NOT_ALLOWED error. https://bugzilla.gnome.org/show_bug.cgi?id=697368	Aleksander Morgado		10 years ago
1236	core: read PCI VID/PID core: read PCI VID/PID Nozomi devices are old Option NV CardBus devices with the ttys (nozX) hanging directly off the PCI device. We need to read the vendor and product IDs off them too. It appears that udev screws up the ID_MODEL_ID field (at least on F17, its set to the device path and not the PCI ID) so just skip looking at the TTY itself and read the PCI parent, where we're 100% sure to find the PCI IDs we want. Backport of 2bbe2f83275e04c44f7fb46102d40871ae505603	Dan Williams		10 years ago
1235	serial-port-qcdm: set SEND_DELAY to 0 (bgo #698869) serial-port-qcdm: set SEND_DELAY to 0 (bgo #698869) For some reason a number of ZTE CDMA devices want the whole QCDM frame in one USB transaction, or at least don't like it being broken up and sent byte-by-byte with a send delay. They simply don't respond. Since testing indicates that every other QCDM capable device I've got also handles a zero send delay on both 3.8.8 and 2.6.32, lets just set it to zero for everything, which should speed things up a bit too. https://bugzilla.gnome.org/show_bug.cgi?id=698869	Dan Williams		10 years ago
1234	cdma: fix crash when disabling modem cdma: fix crash when disabling modem user_data is a MMCallbackInfo, not MMGenericCdma.	Dan Williams		10 years ago

Older »