~pieq/checkbox/add-30suspend-1reboot-cycles-support

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/cpu_stress_test
estimated_duration: 7200.0
requires:
 package.name == 'stress'
user: root
command: num_vm=$(awk '/MemTotal/ {x=$2/262144; print ((x == int(x)) ? x : int(x) +1)}' /proc/meminfo); vm_bytes=$(($(awk '/MemTotal/ {print int($2/1024)}' /proc/meminfo)/$num_vm/4))M; stress --cpu `cpuinfo_resource | awk '/count:/ {print $2}'` --vm $num_vm --vm-bytes $vm_bytes --timeout 7200s
_description:
 PURPOSE:
     Create jobs that use the CPU as much as possible for two hours. The test is considered passed if the system does not freeze.

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/hibernate_30_cycles
estimated_duration: 5400.00
depends:
 power-management/hibernate_advanced
requires:
 sleep.disk == 'supported'
 rtc.state == 'supported'
environ: PLAINBOX_SESSION_SHARE
user: root
command:
 if type -P fwts >/dev/null; then
  echo "Calling fwts"
  fwts_test -l $PLAINBOX_SESSION_SHARE/hibernate_30_cycles -f none -s s4 --s4-device-check --s4-device-check-delay=45 --s4-sleep-delay=120 --s4-multiple=30
 else
  echo "Calling sleep_test"
  set -o pipefail; sleep_test -s disk -i 30 -w 120 | tee $PLAINBOX_SESSION_SHARE/hibernate_30_cycles.log
 fi
_description:
 PURPOSE:
    This is an automated stress test that will force the system to hibernate/resume for 30 cycles

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/hibernate-30-cycles-log-check
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/hibernate_30_cycles.log ] && sleep_test_log_check -v s4 $PLAINBOX_SESSION_SHARE/hibernate_30_cycles.log
_description:
 Automated check of the 30 cycle hibernate log for errors detected by fwts.

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: power-management/hibernate-30-cycle-log-attach
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/hibernate_30_cycles.log ] && cat $PLAINBOX_SESSION_SHARE/hibernate_30_cycles.log
_description:
 Attaches the log from the 30 cycle Hibernate/Resume test if it exists

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend_30_cycles_with_reboots
estimated_duration: 7200
depends:
 power-management/rtc
 suspend/suspend_advanced
user: root
command:
 pm_test reboot --log-level=debug --log-dir=$PLAINBOX_SESSION_SHARE --suspends-before-reboot=30 -r 3
_description:
 This is an automated stress test that will run a sequence of '30 suspend/resume cycles and one reboot' 3 times.

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend_30_cycles
estimated_duration: 2400.0
depends:
 power-management/rtc
 suspend/suspend_advanced
environ: PLAINBOX_SESSION_SHARE
user: root
command:
 if type -P fwts >/dev/null; then
  echo "Calling fwts"
  set -o pipefail; fwts_test -l $PLAINBOX_SESSION_SHARE/suspend_30_cycles -f none -s s3 --s3-device-check --s3-device-check-delay=45 --s3-sleep-delay=30 --s3-multiple=30 | tee $PLAINBOX_SESSION_SHARE/suspend_30_cycles_times.log
 else
  echo "Calling sleep_test"
  set -o pipefail; sleep_test -p -s mem -i 30 | tee $PLAINBOX_SESSION_SHARE/suspend_30_cycles.log
 fi
_description:
 PURPOSE:
    This is an automated stress test that will force the system to suspend/resume for 30 cycles.

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend-30-cycles-log-check
depends: power-management/suspend_30_cycles
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/suspend_30_cycles.log ] && sleep_test_log_check -v s3 $PLAINBOX_SESSION_SHARE/suspend_30_cycles.log
_description:
 Automated check of the 30 cycle suspend log for errors detected by fwts.

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend-30-cycles-log-check-with-reboots
depends: power-management/suspend_30_cycles_with_reboots
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/pm_test.reboot.3.log ] && sleep_test_log_check -v s3 $PLAINBOX_SESSION_SHARE/pm_test.reboot.3.log
_description:
 Automated check of the '30 cycle suspend and 1 reboot times 3' logs for errors detected by fwts.

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend-30-cycle-log-attach
estimated_duration: 1.0
after: power-management/suspend_30_cycles
command: [ -e $PLAINBOX_SESSION_SHARE/suspend_30_cycles.log ] && cat $PLAINBOX_SESSION_SHARE/suspend_30_cycles.log
_description:
 Attaches the log from the 30 cycle Suspend/Resume test if it exists

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend-30-cycle-log-attach-with-reboots
estimated_duration: 1.0
after: power-management/suspend_30_cycles_with_reboots
command: [ -e $PLAINBOX_SESSION_SHARE/pm_test.reboot.3.log ] && cat $PLAINBOX_SESSION_SHARE/pm_test.reboot.3.log
_description:
 Attaches the log from the '30 cycle Suspend/Resume and one reboot times 3' test if it exists

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend-30-cycles-time-check
estimated_duration: 1.0
depends: power-management/suspend_30_cycles
command: [ -e $PLAINBOX_SESSION_SHARE/suspend_30_cycles_times.log ] && sleep_time_check $PLAINBOX_SESSION_SHARE/suspend_30_cycles_times.log
_description:
 Checks the sleep times to ensure that a machine suspends and resumes within a given threshold

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: power-management/suspend-30-cycles-time-check-with-reboots
estimated_duration: 1.0
depends: power-management/suspend_30_cycles_with_reboots
command: [ -e $PLAINBOX_SESSION_SHARE/pm_test.reboot.3.log ] && sleep_time_check $PLAINBOX_SESSION_SHARE/pm_test.reboot.3.log
_description:
 Checks the sleep times to ensure that a machine suspends and resumes within a given threshold

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/hibernate_250_cycles
estimated_duration: 43400.0
depends: power-management/rtc
environ: PLAINBOX_SESSION_SHARE
user: root
command:
 if type -P fwts >/dev/null; then
  echo "Calling fwts"
  fwts_test -l $PLAINBOX_SESSION_SHARE/hibernate_250_cycles -s s4 --s4-device-check --s4-device-check-delay=45 --s4-sleep-delay=120 --s4-multiple=250
 else
  echo "Calling sleep_test"
  set -o pipefail; sleep_test -s disk -i 250 -w 120 | tee $PLAINBOX_SESSION_SHARE/hibernate_250_cycles.log
 fi
_description:
 PURPOSE:
    This is an automated stress test that will force the system to hibernate/resume for 250 cycles

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/hibernate-250-cycle-log-attach
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/hibernate_250_cycles.log ] && cat $PLAINBOX_SESSION_SHARE/hibernate_250_cycles.log
_description:
 Attaches the log from the 250 cycle Hibernate/Resume test if it exists

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/suspend_250_cycles
estimated_duration: 18750.0
depends: power-management/rtc
environ: PLAINBOX_SESSION_SHARE
user: root
command:
 if type -P fwts >/dev/null; then
  echo "Calling fwts"
  set -o pipefail; fwts_test -l $PLAINBOX_SESSION_SHARE/suspend_250_cycles -s s3 --s3-device-check --s3-device-check-delay=45 --s3-sleep-delay=30 --s3-multiple=250 | tee $PLAINBOX_SESSION_SHARE/suspend_250_cycles_times.log
 else
  echo "Calling sleep_test"
  set -o pipefail; sleep_test -p -s mem -i 250 | tee $PLAINBOX_SESSION_SHARE/suspend_250_cycles.log
 fi
_description:
 PURPOSE:
    This is an automated stress test that will force the system to suspend/resume for 250 cycles.

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/suspend-250-cycle-log-attach
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/suspend_250_cycles.log ] && cat $PLAINBOX_SESSION_SHARE/suspend_250_cycles.log
_description:
 Attaches the log from the 250 cycle Suspend/Resume test if it exists

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/suspend-250-cycles-time-check
estimated_duration: 1.0
command: [ -e $PLAINBOX_SESSION_SHARE/suspend_250_cycles_times.log ] && sleep_time_check $PLAINBOX_SESSION_SHARE/suspend_250_cycles_times.log
_description:
 Checks the sleep times to ensure that a machine suspends and resumes within a given threshold

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot
estimated_duration: 4500.0
requires:
 package.name == 'upstart'
 package.name == 'fwts'
command: pm_test -r 100 --silent --log-level=notset reboot --log-dir=$PLAINBOX_SESSION_SHARE
flags: noreturn
user: root
environ: PLAINBOX_SESSION_SHARE
_description:
 Stress reboot system (100 cycles)

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_log
estimated_duration: 1.0
depends: stress/reboot
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/*reboot.100.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_30
requires:
 package.name == 'upstart'
 package.name == 'fwts'
command: pm_test -r 30 --silent --log-level=notset reboot --log-dir=$PLAINBOX_SESSION_SHARE
flags: noreturn
estimated_duration: 2700
user: root
environ: PLAINBOX_SESSION_SHARE
_description:
 Stress reboot system (30 cycles)

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_30_log
depends: stress/reboot_30
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/*reboot.30.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff
estimated_duration: 4500.0
requires:
 package.name == 'upstart'
 package.name == 'fwts'
command: pm_test -r 100 --silent --log-level=notset poweroff --log-dir=$PLAINBOX_SESSION_SHARE
flags: noreturn
user: root
environ: PLAINBOX_SESSION_SHARE
_description:
 Stress poweroff system (100 cycles)

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_log
estimated_duration: 1.0
depends: stress/poweroff
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/*poweroff.100.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_30
requires:
 package.name == 'upstart'
 package.name == 'fwts'
command: pm_test -r 30 --silent --log-level=notset poweroff --log-dir=$PLAINBOX_SESSION_SHARE
flags: noreturn
estimated_duration: 3600
user: root
environ: PLAINBOX_SESSION_SHARE
_description:
 Stress poweroff system (30 cycles)

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_30_log
depends: stress/poweroff_30
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/*poweroff.30.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_30_check
estimated_duration: 1.0
depends: stress/reboot_30
command: pm_log_check --log-level=notset $PLAINBOX_SESSION_SHARE/pm_test.reboot.30.log $PLAINBOX_SESSION_SHARE/pm_log_check_reboot.30.log
_description: Check logs for the stress reboot (30 cycles) test case

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_30_check_log
estimated_duration: 1.0
depends: stress/reboot_30_check
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/pm_log_check_reboot.30.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_30_check
estimated_duration: 1.0
depends: stress/poweroff_30
command: pm_log_check --log-level=notset $PLAINBOX_SESSION_SHARE/pm_test.poweroff.30.log $PLAINBOX_SESSION_SHARE/pm_log_check_poweroff.30.log
_description: Check logs for the stress poweroff (30 cycles) test case

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_30_check_log
estimated_duration: 1.0
depends: stress/poweroff_30_check
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/pm_log_check_poweroff.30.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_check
estimated_duration: 1.0
depends: stress/reboot
command: pm_log_check --log-level=notset $PLAINBOX_SESSION_SHARE/pm_test.reboot.100.log $PLAINBOX_SESSION_SHARE/pm_log_check_reboot.100.log
_description: Check logs for the stress reboot (100 cycles) test case

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/reboot_check_log
estimated_duration: 1.0
depends: stress/reboot_check
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/pm_log_check_reboot.100.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_check
estimated_duration: 1.0
depends: stress/poweroff
command: pm_log_check --log-level=notset $PLAINBOX_SESSION_SHARE/pm_test.poweroff.100.log $PLAINBOX_SESSION_SHARE/pm_log_check_poweroff.100.log
_description: Check logs for the stress poweroff (100 cycles) test case

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/poweroff_check_log
estimated_duration: 1.0
depends: stress/poweroff_check
command:
 set -o pipefail
 tar cvz $PLAINBOX_SESSION_SHARE/pm_log_check_poweroff.100.log | base64

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/graphics
estimated_duration: 600.0
requires:
 package.name == 'x11-apps'
user: root
environ: PLAINBOX_SESSION_SHARE
command: graphics_stress_test --iterations 20 -b repeat -d -o $PLAINBOX_SESSION_SHARE/graphics-stress-results && echo "Graphics Stress Test completed successfully" || echo "Graphics Stress Test completed, but there are errors. Please see the log $PLAINBOX_SESSION_SHARE/graphics-stress-results for details" && false
_description:
 Run the graphics stress test. This test can take a few minutes.

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/graphics-tarball
estimated_duration: 1.0
requires:
 package.name == 'x11-apps'
command: [ -f $PLAINBOX_SESSION_SHARE/graphics-stress-results ] && tar cvz $PLAINBOX_SESSION_SHARE/graphics-stress-results | base64
_description: Attaches the graphics stress results to the submission.

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/usb
estimated_duration: 710.0
user: root
command: removable_storage_test -s 10240000 -c 100 -i 3 usb
_description: Runs a test that transfers 100 10MB files 3 times to usb.

plugin: user-interact
category_id: 2013.com.canonical.plainbox::stress
id: stress/sdhc
user: root
_summary: Stress test for SDHC card
estimated_duration: 780.0
command: removable_storage_test -s 10240000 -c 100 -i 3 sdio scsi usb --memorycard
_description:
 PURPOSE:
     This test will transfers 100 10MB files 3 times to a SDHC card, to
     check that the systems media card reader can transfer large amounts
     of data.
 STEPS:
     1. Insert a SDHC card into the reader and then Click "Test".
        If a file browser opens up, you can safely close it.
     2. Do not remove the device during this test.
 VERIFICATION:
     The verification of this test is automated. Do not change the
     automatically selected result.

plugin: shell
category_id: 2013.com.canonical.plainbox::stress
id: stress/network_restart
estimated_duration: 1500.0
user: root
environ: PLAINBOX_SESSION_SHARE
command: network_restart -t 100 -o $PLAINBOX_SESSION_SHARE
_description: Ping ubuntu.com and restart network interfaces 100 times

plugin: attachment
category_id: 2013.com.canonical.plainbox::stress
id: stress/network_restart_log
estimated_duration: 1.0
depends: stress/network_restart
command: file=$PLAINBOX_SESSION_SHARE/network_restart.log; if [ -e "$file" ]; then iconv -t 'ascii' -c "$file"; fi

plugin: manual
category_id: 2013.com.canonical.plainbox::stress
id: stress/wireless_hotkey
estimated_duration: 60.0
requires: dmi.product in ['Notebook','Laptop','Portable']
_description:
 PURPOSE:
     To make sure that stressing the wifi hotkey does not cause applets to disappear from the panel or the system to lock up
 STEPS:
     1. Log in to desktop
     2. Press wifi hotkey at a rate of 1 press per second and slowly increase the speed of the tap, until you are tapping as fast as possible
 VERIFICATION:
     Verify the system is not frozen and the wifi and bluetooth applets are still visible and functional