0.22.2 - in development
-----------------------
Maintenance release.

 * qrun:
   * Localized help text for selected command is shown correctly now.
     (Alexander Belchenko, Bug #963542)
 * qshelve:
   * Pressing Ctrl+Enter in message edit area triggers shelve action.
     (IWATA Hidetaka, Bug #936982)
   * Hunks are not displayed on Mac OS. (IWATA Hidetaka, Bug #955241)
 * qgetnew:
   * Ask for verification if a checkout should go to a non-empty
     directory - this may cause unwanted conflicts (André Bachmann, Bug #938835)


0.22.1 - 2012/02/21
-------------------
Just in time for bzr 2.5.

 * New command: qignore. (Alexander Belchenko, Bug #524785)


0.22.0 "Alder" - 2012/02/07
---------------------------
What's new in this release:

QBzr 0.22 is companion release for bzr 2.5, and compatible with bzr 2.4.
This release has many improvements and bugfixes. As usual many improvements 
related to qdiff dialog.

While searching for the word or sentence all matches are highlighted.
This highlighting works in qdiff, qshelve, qunshelve, qannotate.
To make navigation faster through the long side-by-side diff, or inside big 
annotated file you can use backside guide bar in qdiff and qannotate.

Behavior change: "Unchanged" option in treewidget filter now only applies 
to versioned files. (Before it was applied to unknown files too).

Other qdiff improvements include: curved lines are using in side-by-side view, 
smart synchronization of side-by-side view in "Complete" mode;
files with wrong or mixed encoding no more shown as "latin-1", but in user-
specified encoding.

For full list of improvements and bugfixes please see changelog below.

 * qannotate:
   * Vertically center the target line when using "Goto Line" in qannotate.
     (Benoît Pierre)
   * Show change markers side of annotate view.
     It represents where lines changed by selected revisions are.
     (IWATA Hidetaka)
 * qbrowse:
   * Does not crash anymore when called for shared repository.
     (André Bachmann, Alexander Belchenko, Bug #578935)
   * Avoid using inventory for access to revision and working trees.
     (Jelmer Vernooij, Bug #922121)
 * qconfig:
   * Fixed Set Default button in Merge tab. (Gordon Tyler, Bug #820635)
 * qdiff:
   * Smart scroll syncronizing for side by side view (in complete mode).
     (IWATA Hidetaka)
   * Fixed ignore whitespace changes code.
     (Alexander Belchenko, Bug #827391)
   * Use curved lines in central widget change markers.
     (IWATA Hidetaka)
   * In the case of file content has mixed encoding that cannot be safely
     decode to unicode qdiff don't fallback to use latin-1 encoding anymore,
     but try to decode such content in "replace" mode.
     (Alexander Belchenko, Bug #814117)
   * Implement search highlight. This change affects to qdiff, qshelve, 
      qunshelve, qannotate. (IWATA Hidetaka, Bug #785565)
   * Show change markers side of diff views. (IWATA Hidetaka Bug #827251)
 * qgetnew
   * Base directories for the source branch and the destination checkout folder
     can now be configured in qconfig, tab 'User Interface'. (André Bachmann)
 * qlog:
   * Do not crash on ghost revisions.
     (Jonathan Riddell, Bug #785967)
   * Show context menu properly after re-load of branch(es).
     (IWATA Hidetaka, Bug #744904)
 * qrun:
   * Command-line arguments with spaces properly quoted.
     (Alexander Belchenko, Bug #824381)
   * Add support for UIFactory.choose. 
     Make it possible to use 'shelve' in qrun. (Benoît Pierre)
 * qverify-signatures:
   * Report commits signed with expired keys in "verify-signatures".
     (Jonathan Riddell, #804254)
 * Adapt command progress display to changes needed for translations in bzrlib
   which was raising a TypeError with unicode. (Martin Packman, #872616)
 * Treewidget 'unchanged' filter is now only versioned files. (Martin Packman)
 * Stringify tab_width settings while writing it to branch config.
   (Workaround for bug #912344, Alexander Belchenko)


0.21.3 - in development
-----------------------
Maintenance release.

 * Avoid AttributeError on 'is_ignored' from treewidget filtering involving
   unversioned files that have been moved. (Martin Packman, Bug #557603)
 * Stringify tab_width settings while writing it to branch config.
   (Workaround for bug #912344, Alexander Belchenko)
 * Don't use deprecated API (bzrlib.builtins.tree_files). 
   (Alexander Belchenko, Bug #776241)


0.21.2 - 2011/12/07
-------------------
Maintenance release.

 * qbrowse:
   * Does not crash anymore when called for shared repository.
     (André Bachmann, Alexander Belchenko, Bug #578935)
 * qconfig:
   * Fixed Set Default button in Merge tab. (Gordon Tyler, Bug #820635)
 * qdiff:
   * Fixed ignore whitespace changes code.
     (Alexander Belchenko, Bug #827391)
 * qlog:
   * Show context menu properly after re-load of branch(es).
     (IWATA Hidetaka, Bug #744904)
 * qrun:
   * Command-line arguments with spaces properly quoted.
     (Alexander Belchenko, Bug #824381)
 * qunshelve:
   * Disable OK button while executing unshelve. (IWATA Hidetaka, Bug #842818)
   * Avoid NoSuchFile error when working tree has added and removed file. 
     (IWATA Hidetaka, Bug #842842)
 * Updated translations.


0.21.1 - 2011/08/04
-------------------
Maintenance release.

 * qlog:
   * Do not crash on ghost revisions. (Jonathan Riddell, Bug #785967)
 * qswitch:
   * Support unicode locations. (Alexander Belchenko, Bug #819259)


0.21 "Tilia" - 2011/07/21
-------------------------
What's new in this release:

QBzr 0.21 is companion release for bzr 2.4, and compatible with bzr 2.3.
New features in this release:

Now you can select changes to shelve and unshelve your saved changes with
new shiny qshelve and qunshelve dialogs.

qdiff window has been reworked and all controls moved to a toolbar, similar to
one in qannotate window. Also qdiff toolbar provides you new functions: text
search within active pane and also knob to ignore whitespace changes (it's 
also available as command-line option).

User can configure the tab width and this setting affects qdiff, qannotate and
qcat windows. By default tab width equals to 8 characters, user can set new
default value in bazaar.conf as ``tab_width = N`` (either via qconfig or
editing [DEFAULT] section of bazaar.conf). Also user can set individual tab
width for branches in their branch.conf. User can configure tab width via
"View Options" menu in toolbars of qdiff, qannotate.

QBzr provides support for new builtin feature of bzr: mergetools. Now you can
easier configure your favorite diff/merge tool to be used from qconflicts or
context menu in qbrowse (Working Tree browser in Bazaar Explorer).

If you have python-gpgme installed and you have enabled gpg-signatures for
your commits then you can see new messages regarding valid gpg-signatures
available in qlog. Also you can run check of your signatures with new
qverify-signatures command.

Other changes include major rework of qinfo dialog (show the same information
as CLI ``bzr info`` does), qcommit dialog now remembers state of "Show
non-versioned" knob between runs, now it's possible to save old state of the
file from qlog dialog (using context menu in file list), error dialogs has been
improved (now also support apport if available) 
and several other improvements and bugfixes (see full changelog for details).

Changes after 0.21 beta 1:

 * qcat:
   * Fixed problem with viewing file from qbrowse.
     (Alexander Belchenko, Bug #776196)
 * qinfo:
   * Turned off word-wrap in location label: prevents strange
     path display if there are spaces in the path.
     (A. S. Budden, Bug #781040)
   * Fixed UnicodeError for non-ascii paths.
     (Alexander Belchenko, Bug #790138)
 * qdiff, qannotate:
   * Tab-width can be customised from the view menu.
     (Bug #490377, A. S. Budden)
 * qgetnew:
   * The target location no longer gets overwritten 
     when the source location changes. (André Bachmann)
 * qlog:
   * File list context menu: added support to save content of a file 
     of specific revision as a new file. (André Bachmann)
   * Show digital signature information for commits if python-gpgme is
     installed
 * Improved error dialogs on internal/other error, 
   support for apport (if it's available).
   (Jonathan Riddell)
 * Branch/Checkout dialogs:
   * Fixed UnicodeDecodeError with non-ascii paths in target directory
     picker. (Alexander Belchenko, Bug #789083)
 * Use bzrlib.mergetools for managing and using external merge tools in qconfig
   and qconflicts. (Bug #489915, Gordon Tyler)
 * New qshelve / qunshelve dialogs. (IWATA Hidetaka)
 * New command qverify-signatures to show digital signature statuses
   for branch commits


0.21 beta 1 - 2011/05/02
------------------------

 * qbranch:
   * Fixed problem with very small width of input fields in the dialog
     on Mac OSX. (Timothy Reaves, Bug #667090)
 * qbrowse:
   * Use `qcat --native` equivalent to allow opening copies of files from
     branches without working trees. (A. S. Budden, Bug #752422)
 * qcommit:
   * Remember "Show non-versioned" checkbox state. 
     (Nick Sonneveld, Bug #258926)
 * qconflicts:
   * Fixed internal error when there is conflict in non-versioned file.
     (Alexander Belchenko, Bug #655451)
 * qdiff:
   * New toolbar with controls and options (similar to qannotate's toolbar).
     (Dorin Scutarașu)
   * Support for ignore whitespace differences in changes. 
     This mode can be turned on from command-line (`qdiff -w` 
     or `qdiff --ignore-whitespace`) and from GUI itself (in View Options).
     (Dorin Scutarașu, Glen Mailer, Bug #642000)
   * Added Find action to do text search within either pane.
     (Dorin Scutarașu, Bug #497832)
 * qinfo:
   * Significantly simpler implementation that shows the information
     provided by Bazaar.  This fills in the gaps in the data shown
     by qinfo (such as details of checkouts) and means that changes
     to 'bzr info' will automatically be reflected in qinfo.
     (A. S. Budden, Bug #439624)
 * qsubprocess:
   * Reliable exception encoding to pass exception attributes 
     from subprocess to the GUI process. (Martin [gz], Bug #686735)
 * qannotate, qdiff:
   * Find text box turns red if no matches are found.
     (A. S. Budden, Bug #772244)
 * qcat, qannotate, qdiff, qconfig:
   * Added ability to customise the tab-stop width (setting in qconfig,
     affects qcat, qannotate and qdiff).
     The setting is stored in [DEFAULT] section of bazaar.conf,
     and is named tab_width (it can also be configured with qconfig).  Units
     are characters (so 4 means a tab should be displayed with the width of 4
     spaces).  The default value is 8.  The setting can also be adjusted in
     branch.conf for specific branches.  (Bug #490377, A. S. Budden)


0.20.3 - 2011/12/07
-------------------
Maintenance release.

 * qbrowse:
   * Does not crash anymore when called for shared repository.
     (André Bachmann, Alexander Belchenko, Bug #578935)
 * qlog:
   * Show context menu properly after re-load of branch(es).
     (IWATA Hidetaka, Bug #744904)
 * qrun:
   * Command-line arguments with spaces properly quoted.
     (Alexander Belchenko, Bug #824381)
 * qswitch:
   * Support unicode locations. (Alexander Belchenko, Bug #819259)


0.20.2 - 2011/07/20
-------------------
Maintenance release.

 * qconflicts:
   * Fixed internal error when there is conflict in non-versioned file.
     (Alexander Belchenko, Bug #655451)
 * qinfo:
   * Fixed UnicodeError with non-ascii locations.
     (Alexander Belchenko, Bug #790138)
 * Branch/Checkout dialogs:
   * Fixed UnicodeDecodeError with non-ascii paths in target directory
     picker. (Alexander Belchenko, Bug #789083)


0.20.1 - 2011/04/26
--------------------
Maintenance release.

 * Compatibility with patched bzrlib on debian without copy of configobj
   library inside it. (Bug #715067, Alexander Belchenko)
 * qbranch:
   * Fixed problem with very small width of input fields in the dialog
     on Mac OSX. (Timothy Reaves, Bug #667090)
 * qsubprocess:
   * Reliable exception encoding to pass exception attributes 
     from subprocess to the GUI process. (Martin [gz], Bug #686735)


0.20.0 - 2011/02/03
-------------------
Bazaar 2.3 companion release. Suitable for bzr 2.3 and bzr 2.2.

 * Refactor the config code:
   * Remove the QBzrGlobalConfig class so that we only have one class that
     writes to qbzr.conf.
   * Have a global cache for the QBzrConfig, like we have for bzr GlobalConfig,
     to reduce reading the config from disk. 
   * Refactor the window.saveSize methods, so that we only have to write the
     config to disk once.
   * Lock the config dir when when saving the config file.
     (Gary van der Merwe)
 * qrun: fixed '--execute' mode. (Bug #590229, Simon Kersey)
 * qlog:
   * Refactor loggraphprovider so that the state and computed data is separated
     from the cache. Rename to loggraphviz.
   * Write lots of tests for loggraphviz.
   * Remove LogFilterProxyModel which improves performance.
   * --no-graph mode now shows nodes per revision, indented by merge depth.
   * Fix the layout of octopus merges. (Bug #489383)
   * Add a option --show-trees that shows working tree changes as a node
     in the graph.
   * Fix bug with show log form the tree widget with remote branch.
     (Bug #621934)
 * qcommit: added option to load commit message from a file.
   (Bug #640071, Philip Peitsch)
 * qconflicts: fix bug with access to QBzr configuration. (Bug #675894)
 * When a interupt signal is recived, close rather than showing a error
   message. (Gary van der Merwe)
 * qpush: fixed smart suggestion of new push URLs for lp branches.
   (Bug #710767, Alexander Belchenko)


0.19.4 - 2011/07/20
-------------------
Maintenance release.

 * qconflicts:
   * Fixed internal error when deleting non-versioned files/directories.
     (Alexander Belchenko, Bug #655451)


0.19.3 - 2010/11/26
-------------------
Maintenance release.

 * The 0.19 series is now marked as incompatible with bzr versions >= 2.3.
   This due to Bug #650905. (Gary van der Merwe)
 * qlog:
   * Fix actions that use the branch menu on PyQt 4.7.4.
     (Bug #621158, Gary van der Merwe)
   * Fix crash when trying to "Revert to this revision",
     "Update to this revision", etc. (Bug #680787, Gary van der Merwe)
 * Restore ignore button for error dialogs. (Gary van der Merwe)


0.19.2 - 2010/09/24
-------------------
Maintenance release.

 * Fix finding bzr.exe when running from bzrw.exe with out full path in the
   command line. Handle been launched from tortoisebzr without it having to
   change sys.executable. (Bug #640082, Bug #641557, Gary van der Merwe)


0.19.1 "Chestnut" - 2010/09/13
------------------------------
Maintenance release.

 * Fix modeltest.py so that it works with Qt 4.7.
   (Bug #614123, Gary van der Merwe)
 * qbrowse: fixed 'Mark as renamed' feature in treewidget.
   (Bug #620433, Alexander Belchenko)
 * qconfig: guess user id if there is no whoami set. 
   (Bug #622336, Gary van der Merwe, Alexander Belchenko)
 * qgetupdates: fixed API mismatch. (Bug #636510, Alexander Belchenko)
 * qlog:
   * better branch labels for `bzr qlog colo:` case. (Alexander Belchenko)
   * give a size hint for the GraphTagsBugsItemDelegate so that blured 
     rendering on Windows with PyQt 4.7 is avoided. (Gary van der Merwe)
 * qrun: fixed '--execute' mode. (Bug #590229, Simon Kersey) 


0.19 "Shepherd's Tree, aka Boscia albitrunca" - 2010/08/05
----------------------------------------------------------
Bazaar 2.2 companion release. Suitable for bzr 2.2 and bzr 2.1.

Changes since 0.19b2 release:

 * qlog:
   * Context menu actions for tag, and revert will now show a branch menu if
     more than one branch is open. (Craig Hewetson, Gary van der Merwe)
   * Add context menu actions for update, cherry-pick, and reverse cherry-pick.
     (Bug #258360, Gary van der Merwe)
 * Language of GUI can be set in DEFAULT section of bazaar.conf 
   as ``language = code``. Language codes are the same as for LANG environment
   variable. Environment variable LANGUAGE still preferred over settings
   in bazaar.conf. (Alexander Belchenko)
 * Added Thai translation.


0.19 Beta 2 "Pomegranate" - 2010/07/01
--------------------------------------
 * Allow finding locale in system location on Linux
   (Bug #542429, Toshio Kuratomi).
 * Provide better text on Close and Ignore buttons when exceptions raised.
   (Bug #486946, Luis Arias)
 * Fix bug where Mac OS X windows start in background. (Bug #417162,
   Luis Arias)
 * Fix bug in treewidget where folders are repeated.
   (Bug #580798, Iwata, Gary van der Merwe)
 * qsubprocess: when sending error object over the stdout we should use
   unicode-escape encoding for the possible unicode/multiline strings.
   (Bug #570564, Alexander Belchenko)
 * qinit: set default value for repository format in the combobox.
   (Bug #531795, Gordon Tyler)
 * qcommit:
   * Hide completer's popup when a IME event occurs. (Bug #573652, INADA Naoki)
   * If a branch path is passed to the command line, select the files in
     the branch. (Gary van der Merwe)
 * qdiff: Use the new  bzrlib.diff.get_trees_and_branches_to_diff_locked api.
   (Gary van der Merwe)
 * qlog:
   * Handle ghost revisions better. Ghost can now be seen in the graph,
     and don't cause search to crash. (Bug #57042, Gary van der Merwe)
   * Show better labels for branch tips. Show a tooltip with the full branch
     url. (Bug #585309, Gary van der Merwe)
   * Fix a bug where branch labels don't show if the have the same tips.
     (Bug # 485236, Gary van der Merwe)
   * qlog . in a sub dir now filters to only show the sub dir.
     (Bug #517592, Gary van der Merwe)
   * Fix crash we viewing file history from qbrowse/bzr explorer.
     (Bug #585280, Gary van der Merwe)
 * qupdate, qunbind, qgetupdates:  new --execute option will run these
   commands immediately without waiting for the user to click on the Ok button
   (Luis Arias)
 * qannotate:
   * Add find and goto line interfaces. The style for this interface will be
     used for other browsing windows in the future.
     (Bug #215256, Gary van der Merwe)
   * Double clicking or pressing enter for a revision now changes the annotated
     revision. Please use the context menu to get to the diff.
     (Bug #404276, Gary van der Merwe)
   * When changinging the annotated revision, the scroll position, and selection
     are maintained. (Bug #404288, Gary van der Merwe)


0.19 Beta 1 "Monkey-puzzle, aka Araucaria araucana" - 2010/03/29
----------------------------------------------------------------
 * Added Hungarian translation.
 * qcommit: Give the user the option to update the branch if it is not up to
   date. (Bug #439920, Gary van der Merwe)
 * qpush, qmerge, etc.: When there are uncommit changes in the working tree,
   give the user the option to commit, or revert. (Gary van der Merwe)
 * qlog: Improve performance by using KnownGraph. (John Arbash Meinel,
   Gary van der Merwe)
 * TreeWidget dialogs (qcommit, qadd, qrevert, qbrowse):
   Performance improvements for select all, and changeing filters.
   (Bug #513105, Bug #476641, Gary van der Merwe)
 * Improve startup performance by using lazy imports. (Gary van der Merwe)

Note: qbzr now requires bzr 2.1.


0.18.8 - 2011/04/27
-------------------
Maintenance release.

 * qrun:
   * Fixed '--execute' mode. (Bug #590229, Simon Kersey) 


0.18.7 "Juniper" - 2010/08/04
-----------------------------
Maintenance release.

 * Don't break when bzr-search tries to import bzr-svn, 
   and bzr-svn is incompatible with bzrlib.
   (Bug #546843, Gary van der Merwe)
 * Treewidget: Fix bug in treewidget where folders are repeated. 
   (Bug #580798, Gary van der Merwe)
 * Added Thai translation.


0.18.6 - 2010-05-04
-------------------
Maintenance release.

 * qlog: Fix a bug with search. (Bug #575338, Gary van der Merwe)
 * qlog: Fix a bug were qlog crashes when bzr-svn is incompatible with bzrlib.
   (Bug #546843, Gary van der Merwe)
 * Fix bug in treewidget where folders are repeated.
   (Bug #580798, Iwata, Gary van der Merwe)


0.18.5 "Silver terminalia" - 2010-04-02
---------------------------------------
Maintenance release.

 * qsubprocess: pass command line with double and multiple backslashes 
   via temporary file. (Bug #528944, Alexander Belchenko)
 * qlog, qbrowse: Fix a bug when using with pyqt 4.7.2. (Bug #544928,
   Gary van der Merwe)


0.18.4 "Pussy-willow" - 2010/03/22
----------------------------------
Bugfixes in the stable branch. Suitable for bzr 2.1.x.

 * Improved support for Redmine bugs URL. (Bug #538414, Alexander Belchenko)
 * TreeWidget: Fix a bug where refreshing may result in data inconsistencies.
   This bug was causing a number of knock on bugs.
   (Bug #538753, Gary van der Merwe)
 * qcommit: better support of commit directly into SVN tree.
   (Bug #540363, Alexander Belchenko)


0.18.3 "Cypress" - 2010/03/03
-----------------------------
Bugfixes in the stable branch. Suitable for bzr 2.1.x.

 * Fixed problem with running diff from qannotate from qbrowse.
   (Bug #505987, Alexander Belchenko)
 * Rollback changes to qadd made in 0.18.2 which caused regression.
   (Bug #526933, Alexander Belchenko)
 * Handle FileTimestampUnavailable error when diffing file with ghosts
   in history. (Bug #513096, Alexander Belchenko)
 * Change dialogs to have normal window flags. This fixes a bug where on
   some window managers (metacity, Mac OSX) windows opened from a dialog
   would be behind the dialog. (Bug #421039, Gary van der Merwe)
 * TreeWidget: emit layoutAboutToBeChanged signal while we remove old items
   to ensure model data consistency.
   (Bug #513066, Bug #515908, Gary van der Merwe)
 * TreeWidget: When renaming a file, pressing enter should not cause the
   default action to be run. (Bug #513107, Gary van der Merwe)
 * Sub processes dialogs: Fix usability bugs with the Retry button:
   * The button position changes on Linux when the Retry button appears. 
   * The Enter key does not work after the Retry button appears.
   (Gary van der Merwe)
 * TreeWidget: Add more comprehensive tests. Fix some minor bugs found by
   these tests. (Gary van der Merwe)
 * TreeWidget: Fix a bug where the TreeWidget if there was a conflict, for
   which the file does not exist. (Bug #528548, Gary van der Merwe)


0.18.2 "Cedar" - 2010/02/21
---------------------------
Bugfixes in the stable branch. Suitable for bzr 2.1.x.

 * qconfig: don't quote editor path. (Bug #523212, Alexander Belchenko)
 * qsubprocess: pass command line with \n in it via temporary file.
   (Bug #517420, Alexander Belchenko)
 * qsubprocess: relax the unicode problems while decode stdout of subprocess.
   (Bug #523746, INADA Naoki)
 * Restore standard bzrlib ui_factory on exit from q-commands.
   (Bug #498309, Alexander Belchenko)
 * Better "select all" logic for qrevert and qadd. 
   (Bug #524483, Alexander Belchenko)
 * Added Hungarian translation.


0.18.1 "Fern" - 2010/02/04
--------------------------
What's new in this release:

 * Treewidget: Fix a crash when refreshing tree with a checked item that has a
   parent that is ungrouped. (Bug #512006, Gary van der Merwe)
 * Avoid importing Qt libs when `bzr help commands` invoked. 
   (Bug #515636, Alexander Belchenko)


0.18 "Pine-needles" - 2010-01-19
--------------------------------
What's new in this release:

 * Fixed problems with rename items in subdirectory. (Bug #495519, INADA Naoki)
 * Flush clipboard on exit, so data copied there is available after closing of
   q-window. (Bug #503401)
 * Fixed problem with insufficient width of revno column in qannotate and
   qbrowse (for revision tree) if revno bigger than 9999. 
   (Bug #505990, Alexander Belchenko)
 * Changed buttons behavior in subprocess-based dialogs: if the operation
   failed then show Retry button (instead of OK), at the successfull finish
   show only Close button. (Simon Kersey)
 * qrun has new option --execute which allows to run the supplied command
   immediately. If the command failed user can edit the command and its
   arguments in usual way. (Simon Kersey)
 * Fixed a bug in the new SyntaxHighlighter used in qannotate and qcat so that
   it correctly handle tokens without styles. (Bug #508281, Gary van der Merwe)
 * Fixed a bug in TreeWidget were some times duplicated in parent directories.
   (Gary van der Merwe)
 * qbranch has a new --bind option for convenient binding to the parent
   location while branching.
 * qcommit: Non versioned files are now selected by select all when they are
   shown. (Bug #490864, Gary van der Merwe)
 * Serbian translations added.


0.17 "Sapin de Noﾃｫl" - 2009/12/12
---------------------------------
What's new in this release:

 * New encoding selector added to qdiff, qannotate, qcat and qviewer. 
   This selector allows change of the text encoding "on the fly". See:
   http://bazaarvcs.wordpress.com/2009/12/04/selecting-file-encoding-in-qbzr/
 * qpush can auto-suggest push location for feature branches when master
   branch hosted on remote server. In the case of Launchpad it suggests
   location lp:~user/project/branch.
 * Now it's possible to tag a revision while browsing history in qlog.
 * Details on revision in qlog now have fancy dots for parent/children
   revisions, dots have the same color as in main qlog graph.
 * qcat/qviewer: show line numbers for text lines.
 * qannotate: new feel & look, you can copy text from annotated view now.
 * qrun now groups the commands into several categories (All, Core, 
   and separate for each installed plugin)
 * New translations added: Arabic, Czech, Danish, English (United Kingdom).
 * And many other bugfixes as well.

Changelog:

 * New encoding selector added to qdiff, qannotate and qcat. This selector
   allows change of the text encoding "on the fly". (INADA Naoki)
 * qpush:
   * When a push location is yet to be defined, qpush suggests a location for
     feature branches when the master branch is hosted on Launchpad.
     (Bug #487562, Ian Clatworthy)
 * qconflicts:
   * Double click on file item opens merge tool. (Eugene Tarasenko)
 * qdiff:
   * Fixed problem with invoking external diff from qdiff dialog 
     when the current directory is not repository root. 
     (Bug #439084, Alexander Belchenko)
 * qlog:
   * Added "tag revision" action to context menu. (Bug #442953, Craig Hewetson)
   * Robust handling of bogus --fixed properties. (Bug #436834, Craig Hewetson)
   * The properties box in the message box now follow the theme, and hence are
     now readable on dark themes. (Bug #407070, Gary van der Merwe)
   * Parents and children in the message box are now show with a dot, of the
     same color as thier dot in the graph. (Gary van der Merwe)
 * qcat:
   * Line numbers are now shown when viewing text files. (Gary van der Merwe)
 * qannotate:
   * It is now possible to select and copy text from qannotate. (Bug #251309,
     Gary van der Merwe)
   * Show all revisions that touch the file in the log list. (Bug #488824,
     Gary van der Merwe)
 * qrun:
   * A category field has been added to make finding commands easier.
     (#486968, Ian Clatworthy)
   * The command name, command parameters and command category can be
     passed on the command line. (Ian Clatworthy)
 * qsubprocess:
   * Catch possible errors from bencode decoder is we got malformed string
     from child process. Show the error nicely. 
     (Bug #484624, Alexander Belchenko)
 * treewidget (used in qcommit, qadd, qrevert, and qbrowse):
   * Fixed compatibility with PyQt < 4.6. 
     (Bug #479093, Bug #478979, Gary van der Merwe)
   * Extended keyboard navigation: pressing Enter invokes default action
     for selected item. (Bug #483597, Alexander Belchenko)
   * Fixed is_ignored() check (versioned file that matches ignore pattern
     should not be called "ignored"). (Bug #487560, Alexander Belchenko)
 * qrevert:
   * Don't revert entire directory if only one file within it is selected.
     (Bug #491212, Alexander Belchenko)
 * qbranch:
   * If a source URL is given on the command line, focus is set to
     the To field.
   * The To location is now intelligently set based on the source URL.
     (#318214, Ian Clatworthy)
 * qexport:
   * Fixed NameError when invoked with directory location argument.
     (Bug #491702, Alexander Belchenko)
 * qconfig:
   * Properly save data in empty qbzr.conf. (Bug #493634, Alexander Belchenko)
 * New translations added: Arabic, Czech, Danish, English (United Kingdom).


0.16 "Acacia" - 2009/11/9
-------------------------
What's new in this release:

 * qswitch:
   * Added support for --create-branch option to "bzr switch". (A. S. Budden)
 * SubprocessUIFactory and QUIFactory now both support get_username, and
   get_boolean. (Bug #421851, Gary van der Merwe)
 * Save the size of Dialogs when the user press Esc. (Bug #417809,
   Gary van der Merwe)
 * qlog:
   * Get the max main_line digets in a different way so that we don't break 
     --no-graph. (Bug #455867, Gary van der Merwe)
   * Corrected the margin for the revision number column. (Gary van der Merwe)
   * When loading the file list delta, only lock the repositories that are
     being used. If the 2 trees are from the same repositories, load them 
     together. (Gary van der Merwe)
   * When viewing a svn repo, only show the file list if 1 revision is selected,
     and if so, use a optimized method to do so. (Bug #450225,
     Gary van der Merwe)
   * Show a throbber above the file list while a delta is being loaded.
     (Gary van der Merwe)
   * Fix a bug when refreshing a branch with revisions that have been removed.
     (Bug #435486, Gary van der Merwe)
 * qlog/qannotate:
   * Preserve leading whitespace in the lines of the log message.
     (Max Bowsher)
 * qadd:
   * Don't show unchanged directories that contain ignored files. 
     (Bug #462435, Gary van der Merwe)
 * qcommit, qadd, qrevert:
   * Directoies with 4 or more sub items are grouped in the tree view.
     (Bug #456198, Gary van der Merwe)
   * Correct the old path shown for renamed files. (Bug #432572,
     Gary van der Merwe)
   * Passing a directory via the command line now correctly checks the
     directory. (Bug #435034, Gary van der Merwe)
   * For qcommit, It is now possible to select unversioned file and directories
     via the command line. (Gary van der Merwe)
   * Automaticly expand to the check items on load. (Gary van der Merwe)
   * Fix View for unversoined files when run from a sub directory of the
     working tree. (Gary van der Merwe)
 * qcommit/qbrowse:
   * Conflicts are shown in the status column. External merge applications
     can be launched to resolve these conflicts, and the conflicts can be
     marked as merged. (Bug #174509, Gary van der Merwe)
   * Improved the usibility of the context menu add, and revert actions.
     These now directly use the api, rather than via subprocess. There is
     now no prompt for add. With large trees, there is less flicker when the
     tree is refreshed, and the scroll position is remembered.
     (Gary van der Merwe)
   * It is now possible to rename and move files or directories, and to mark
     files or directories that have already been renamed or moved as such.
     (Gary van der Merwe)
   * It is now possible to remove files from the branch. (Gary van der Merwe)
   * Show blank icon for missing files. (Bug #418471, Gary van der Merwe)
 * qcommit/uncommit:
   * Catch AttributeError in save of commit_data during qcommit and/or uncommit 
     in lightweight checkout from branch accessed via smart-server 
     (lp:, bzr+ssh://, bzr:// etc). 
     (Bug #434034 Bug #430382 Bug #463296, Alexander Belchenko)
 * qsubprocess:
   * Show actual command-line to user when we invoke action via qsubprocess.
     (Bug #476025, Alexander Belchenko)
 * qcommit:
   * Don't run `bzr add --no-recurse` before commit if there is nothing to add.
     (Alexander Belchenko)
 * qplugins:
   * Format plugin version nicely even if it does not follow bzr standards on
     version_info tuple. (Bug #475286, Alexander Belchenko)


0.15 "Yellow and green" - 2009-10-19
------------------------------------
What's new in this release: 

 * Compatible with bzr >= 1.17 (works fine with 2.0.x and 2.1.x series).
 * New qrun dialog to launch any (non-interactive) bzr command.
 * Improved speed of qcat, qdiff, qlog.
 * Added Browse button for editor selection in qconfig.
 * qconflicts: Enable multiple selections of conflict items to resolve 
   or launch merge tool for them.
 * qgetupdates and qupdate dialogs now properly support all 3 cases:
   * update tree
   * update bound branch
   * update lightweight checkout
 * qlog can display foreign revision info if available.
 * Sort tags alphabeticaly and case-insensitive in qtag dialog.
 * qexport now has sensible defaults and more user-friendly archive
   types (e.g. tar.gz instead of tgz) displayed in the combo box.
   On windows, the default archive type is now zip as well.
 * And more than 37 bugfixes (plus all critical bugfixes from 0.14.x releases).

Detailed changelog:

 * Compatible with bzr >= 1.17 (works fine with 2.0.x and 2.1.x series).
 * Internal: 
   * Install QUIFactory after we have properly initialize QApplication.
     (#430232, John Arbash Meinel)
   * Better compatibility of qbzr test suite with bzr 2.1.
     (#433843, Vincent Ladeuil)
   * Use unicode('.') everywhere as current directory marker. (Naoki INADA)
   * Don't bundle PyQt4 and Pygments libs to Windows installer anymore.
     (Alexander Belchenko)
   * Get rid of old-style classes to be compatible with PyQt 4.6.
     (#447214)
 * New dialog:
    * qrun (Alexander Belchenko)
 * qadd:
   * Properly support adding unversioned files to newly added directory.
     (#418520, Gary van der Merwe)
 * qbind/qunbind:
   * Show Close, not Ok/Cancel, on completion. (#449489, Ian Clatworthy)
 * qcat:
   * Improve speed of syntax highlighting. (#442965, Atsuo Ishimoto)
 * qconfig:
   * Added Browse button for editor selection. (#430192, Alexander Belchenko)
 * qconflicts:
   * Enable multiple selections of conflict items to resolve or launch merge
     tool for them. (#415393, Craig Hewetson)
 * qdiff:
   * More responsive dialog during diff loading. (Gary van der Merwe)
   * Better support for external diff tools. 
     (#422688, #423221, Gary van der Merwe)
 * qgetupdates:
   * Now able to update lightweight checkouts. (Alexander Belchenko)
 * qlog:
   * More responsive dialog during revision loading. (Gary van der Merwe)
   * Faster qlog on directory. (Gary van der Merwe)
   * Show the revision html, and file delta for all selected revisions.
     (#412029, Gary van der Merwe)
   * Don't show the throbber when loading revisions from a remote repo
     to avoid weird behavior. (#412894, Gary van der Merwe)
   * Fixed regression with --no-graph feature. (#448232, Craig Hewetson)
   * Display foreign revision info if available. 
     (John Szakmeister, Gary van der Merwe)
   * Auto-adjust revno column to the number of digits in latest revno
     on mainline. (#450179, Gary van der Merwe)
 * qpull/qpush:
   * Don't remember location by default. (Alexander Belchenko)
 * qsubprocess: 
   * New command-line option --bencode to use bencoded command list.
     (#392920, Alexander Belchenko)
   * Very long command-line passed to qsubprocess via temp file 
     regardless of platform. (#387320, Alexander Belchenko)
 * qtag: 
   * Sort tags alphabeticaly and case-insensitive. (#423075, Craig Hewetson)
   * Save/restore the size of dialog. (#435859, Craig Hewetson)
 * qupdate:
   * Now working for bound branches (aka heavyweight checkouts).
     (#422649, Craig Hewetson)


0.14.7 - 2010-09-04
----------------------------
Bugfixes and backported bugfixes.

  * Change dialogs to have normal window flags. This fixes a bug where on
    some window managers (metacity, Mac OSX) windows opened from a dialog
    would be behind the dialog. (Bug #421039, Gary van der Merwe)
  * Fix test failures with new versions of bzr. (Bug #433843, Gary van der Merwe)
  * qlog: Fix a bug were qlog crashes when bzr-svn is incompatible with bzrlib.
    (Bug #546843, Gary van der Merwe)


0.14.6 "Spruce" - 2010-01-18
----------------------------
Bugfixes and backported bugfixes.

  * qlog: Fix a bug when refreshing a branch with revisions that have been 
    removed. (Bug #435486, Gary van der Merwe)


0.14.5 "Dropzone" - 2009-10-31
------------------------------
Bugfixes and backported bugfixes.

 * qcommit:
   * Catch AttributeError in save of commit_data during qcommit and/or uncommit 
     in lightweight checkout from branch accessed via smart-server 
     (lp:, bzr+ssh://, bzr:// etc). 
     (#434034 #430382 #463296, Alexander Belchenko)
 * qlog:
   * Avoid a deprecation warning when diffing the first rev in a branch.
     (John Szakmeister)
 * qadd:
   * Properly support adding unversioned files to newly added directory.
     (#418520, Gary van der Merwe)
 * qtag: 
   * save/restore the size of dialog. (#435859, Craig Hewetson)
 * Save the size of Dialogs when the user press Esc. (Bug 417809,
   Gary van der Merwe)
 * qsubprocess: 
   * new command-line option --bencode to use bencoded command list.
     (#392920, Alexander Belchenko)
   * Very long command-line passed to qsubprocess via temp file 
     regardless of platform. (Alexander Belchenko)


0.14.4 "Kenny" - 2009-10-17
---------------------------
Critical Koala bugfixes.

 * Internal: get rid of old-style classes to be compatible with PyQt 4.6.
   (#447214)
 * qlog:
   * handle revids as plain strings, not unicode. (#452235)
 * qcommit/qrevert: 
   * Fixed a bug were the pending merges graph was being loaded
     twice. (Gary van der Merwe)


0.14.3 - 2009-10-02
-------------------
Bugfixes release.

 * qcommit:
    * Fixed bug with inability of run qcommit /path/to/tree/root after merge.
      (#433137, Alexander Belchenko)
 * qlog:
    * Ensure that tree objects correctly locked when checking for directories.
      (#436467, Gary van der Merwe)


0.14.2 - 2009-09-16
-------------------
Bugfixes.

 * qlog:
    * Fixed couple of problems with proper rendering of branch labels
      when inspecting log for several branches (e.g. in shared repo).
      (Gary van der Merwe)
 * qmerge, qcommit, ...:
   * Fixed a bug where we create the QApp after opening a Branch, but we had
     already installed the QUIFactory(). A branch can be a lightweight checkout
     of a remote location which requires a password. Which wants to open a UI
     dialog, which causes a crash because QApp has not been created yet.
     (#430232, John Arbash Meinel)


0.14.1 - 2009-09-10
-------------------
Maintenance release:

 * qannotate:
   * Fixed a bug when annotating a file in a branch with no working tree.
     (Bug 419477)
   * Fixed a bug were the logwidget would crash trying to render some graphs.
     (Bug 417895)
   * Fixed a bug were it was not possible to annotate files that have been
     deleted. (Bug 419790)
   * Fixed a bug where opening a per file diff would crash with a
     ObjectNotLocked error in a 2a branch. (Bug 426688)
 * qlog:
   * Fixed a bug where it was not possible to do any file list context menu
     actions on a file that was renamed in the revision that you were viewing.
     (Bug 418340)
   * Fixed a graph layout bug, where if the first revions of a brach was
     filter, there was no non direct line to it. (Bug 417895)
   * Removed superfluous twisties at the end of a filterted branch line.
     (Bug 419784)
   * Fixed a bug where branch lables would show on the wrong revisions.
     (Bug 423201)
 * qcommit:
   * Show a friendly error message when tring to commit a specific file,
     and there are pending merges. (Bug 417210)
 * qbrowse:
   * Fixed a bug where the window would crash with a ObjectNotLocked error
     when expanded a folder in a 2a branch. (Bug 424258)
 * Handle errors raised from _qbzr_run methods and the __init__ methods that
   they call, so that ui-mode is honoured when they are reported. (Bug 420534)


0.14 "Eucalyptus" - 2009-08-21
-------------------------------
What's new in this release: 

 * we have 5 new dialogs (qbind, qunbind, qexport, qplugins and quncommit).
 * better help for plugin itself (now `bzr help qbzr` gives you
   useful info).
 * qcommit and uncommit hook now can store revision message and
   information about bugfixes for revision, this information automatically
   restored on next qcommit run in this branch.
 * most q-commands now able to return exit code 0 when operation 
   finished successfully, and exit code 1 when dialog/operation was canceled.
 * `merge --qpreview` feature has disabled.
 * qmerge now supports uncommitted and forced merging.
 * Dozen bugfixes and small improvements.

Detailed changelog:

 * New dialogs: 
    * qbind, qexport, qunbind (Javier Derderian)
    * qplugins, quncommit (Ian Clatworthy)
 * Renamed [hidden] command qbzr to qmain.
 * Better help for plugin itself.
 * Full list of all contributors added to AUTHORS.txt.
 * Most q-commands those change state of the branch or working tree
   (e.g qcommit, qadd, qpull etc.) now return exit code 0 when operation 
   finished successfully, and exit code 1 when dialog/operation was canceled. 
   Commands those only show information about branch/tree or the bzr itself
   (e.g. qlog, qdiff, qversion) always return exit code 0.
 * Now QBzr can save and restore bug ids information on qcommit cancel
   and in uncommit hook (#380896, #328636). On uncommit it also saves
   beginning and end revision ids of uncommitted chain of revisions
   in addition to old tip revision message and bug ids. All data saved
   as dictionary in "commit_data" section of branch.conf.
 * Disabled decoration of merge command with --qpreview option (#395817).
 * qmerge now supports forced merging and merging of uncommitted changes.
   (#400062, #409865)
 * qinfo now works on shared repositories (#385105)


0.13.1 - 2009-08-11
-----------------------

 * qdiff: Fix for critical regression when viewing diffs with images. (#411811)


0.13 - 2009-08-10
-----------------------
 * Bazaar 1.18 compatibility fixes. (#397615) (#402022) (#404269)
 * Support for PyQT 4.5 (#394125)
 * New dialogs for qsend (#174504), qswitch (#385116)
 * External diff buttons are now the correct width when using the qgtkstyle.
 * Added Estonian translation.
 * Bug reports now point to https://bugs.launchpad.net/qbzr/+filebug rather
   than https://bugs.launchpad.net/bzr/+filebug. It is now possilble to click
   on this link.
 * qcommit:
   * Pressing Escape cancels the dialog.
   * Spelling suggestions are shown in the message context menu. (#395895)
   * If you dbl click on a pending merge, it will show the revision message,
     which is usefull if you want to copy it.
   * When the arguments are written to a file, thay are now encoded. (#398750)
   * Added a refresh button to reload changes. (#253777)
 * qcommit, qadd, and qrevert now reuse the widget from qbrowse. This means
   that there are more context menu items, and you can expand unversioned
   directories (#258929). On Windows and Mac, system file icons are shown.
 * qrevert: You can now control if you want to revert pending merges. (#388469)
 * qlog:
   * Support for Mantis BugTracker bug urls.
   * Wildcards now supported to search for message, author, tags and bugs.
     You can see all revisions with tags or bugs by selecting corresponding
     search filter and type * in the search entry.
 * qannotate:
   * It is now possible to annotate the working tree.
   * Branch encoding setting is now correcly loaded. (#397753)
   * A minimum of 80 chars is now shown (#397756)
 * qdiff:
   * Use configured color for interline_changes_background.
   * Files now correctly aligned. There is no longer a space at the end of each
     line. (#271178)
   * Performance improvement for loading and scrolling. (#411367)


0.12 - 2009-07-08
-----------------------
Maintenance release: compatibility with bzr 1.17 (progress indicator for
commands); branching into exisiting directory (with qbranch) works now
(require bzr 1.17); better support of unicode paths in various commands.

 * qbranch: now it's possible to branch into newly created empty directory.
 * qgetupdates: new alias: qgetup
 * qmerge: the revision argument is no longer ignored.
 * qupdate: new command as simple front-end for stadard `bzr update`
 * qversion: new command to display Bazaar & Python installation information
 * qannotate:
   * Revisions are loaded lazily (only when they appear on screen.) This
     greatly reduces the load time when annotating a file from a remote branch.
     (The code for this is reused from qlog.)
   * Add a item to the revision list context menu to annotate a older revision.
 * qbrowse:
   * It is now possible to browse a working tree. The change status of file is
     shown.
   * Trees are loaded lazily (sub directories are only loaded when you expand
     them.)
   * Revisions are loaded lazily (only when they appear on screen.) This
     greatly reduces the load time when browseing a remote branch.
     (The code for this is reused from qlog.)
 * qlog/qannotate/qbrowse: revision numbers are right aligned on the mainline
                           number. E.g:
                           
                           10
                            9
                            8.2
                            8.1
                            8
 * Universal installer for Windows: one installer for both standalone bzr.exe
   version and for python-based version.

NOTES: this is last release with tested PyQt 4.3.x support. 
All further releases will be tested against PyQt 4.4 as minimum supported
version.


0.11.0 - 2009-06-11
-----------------------
Maintenance release: compatibility with bzr 1.16 (bencode releated changes),
improved performance of qlog, more fixes for side-by-side qdiff, a dozen of
various bugfixes.

Windows standalone installer for QBzr now built with Inno Setup.
Now user can install only main QBzr files without additional libraries
(e.g. PyQt4). So this installer now can be used to upgrade copy of QBzr plugin
installed as part of standalone bzr.exe installer.

 * qbrowse:
    * Fix problem with opening the log for file/directory. (#383192)
 * qinfo:
    * Add a basic help string (#384632)
 * qview command renamed to qviewer (previously qviewer was alias for qview)
   to avoid confusion with bzr views feature. (#385225)

NOTES: when upgrading your standalone installation of qbzr (on Windows) 
you should uninstall old QBzr first, and then re-install it from new installer.


0.10.0 - 2009-06-02
-----------------------
Maintenance release: log widget with revisions graph used in qannotate, 
and qcommit (to show pending merges); you can search for tags and bugs
in qlog; improvements to show qlog for multiple files or for dir content;
more context menus; various bugfixes.

 * qlog:
    * Added search for tags and bugs.
    * Fixed a bug with qlog FILE where it was not showing revisions if the
      revision that changed the file had been merge into another branch before
      it was merged into the mainline. (Bug #350166)
    * Fixed a bug when clicking refresh with multiple branches open.
      (Bug #351633)
    * When viewing a remote branch, qlog will load the revisions from local
      current directory if availible.
    * Improvements to the graph layout.
    * When opening diffs, there is less of a delay.
    * When running qlog DIR, revisions that change the children of the directory
      are also displayed. This only works if you are using bzr 1.14.
      (Bug #314528)
    * When runing qlog FILE1 FILE2 or qlog DIR, changes to the specified files are
      displayed in bold. By default diff will show changes only to selected
      items. Full diff could be invoked via context menu.
    * Add context menu to file list.
 * qannotate:
    * Use the log widget to display the revision list with a folding graph. The
      graph can be disabled by using the --no-graph command line argument.
      (Bug #328595)
    * Fixed a bug where qannotate crashes if you scroll to the bottom of the
      file and the file's last line is blank. (Bug #340956)
    * Add option to the log context menu to select a revision to annotate.
 * qcommit:
    * Use the log widget to display the pending merges list with a folding
      graph. (Bug #328592)
 * qdiff:
    * Fixed a bug with the error reporting when launching external diffs.
 * qpull/qpush/qmerge: 
    * If there is no default saved location then set focus on URL combobox


0.9.9 - 2009-03-28 
---------------------- 
Maintenance release: qlog improvements, bugfixes, configurable external
merge to use with qconflicts, configurable colors for qdiff window,
new qview command.

 * qcommit:
   * Added Diff button to view changes in files selected to commit.
 * qconfig:
   * Added tab to configure external merge tools.
 * qconflicts:
   * Use extmerge if configured.
 * qdiff:
   * User can configure colors for diff view in qbzr.conf,
     under the [QDIFF COLORS] section
 * qlog:
   * Added support for following bug trackers: Microsoft SharePoint,
     FogBugz, Roundup.
   * new --no-graph command line option to show plain log for one file.
   * new style of labels for bugs/tags/branches.
 * qrevert:
   * Added Diff button to view changes in files selected to revert.
 * qview: new command to view content of any arbitrary file from disk.
 * When some internal error occurs while q-command is running 
   then user will see special information dialog with error message 
   and prompt to file the bug report.
 * Added special translation for English locale.


0.9.8 - 2009-02-13
------------------

This release is a minor regression fixing release, to be released in sync with
bzr 1.12 final.

 * Fix bug where qinit was not working - correclty handle QString arguments
   when starting a subprocess (Bug #327395)


0.9.7 - 2009-02-09
----------------------
 * qcommit:
    * handle situation with huge list of committed files on Windows
      (Bug #277077).
    * properly show changed files when only executable bit changed.
    * fixed a bug, where if there is a lock on a branch, you could not close
      the window.
 * qconflicts: new command and new window to view and resolve conflicts.
 * qlog:
    * removed the delay when loading revision form local repositories.
    * when the search is, scroll so that the selected revision is kepted in
      view.
 * qdiff:
    * Don't use replace when decoding texts, fall back to latin1 instead.
      (Bug #323543 - side-by-side shows wrong changes highlighting for files
      with non-ascii characters)
 * qrevert:
    * added --no-backup option. 
 * Add the ability to configure, and use external diff tools from QBzr.
   If the user has bzr-difftools - the usability of this funcaility is
   improved.
 * Properly stop running action with Cancel button on Windows.
 * Transport activity is displayed next to the throbbers/progress bars.
 * Password prompts are now displaied in qlog, qbrowse, qcat, qdiff, qannotate.


0.9.6 - 2009-01-10
----------------------
New features in this release: throbber, interactive password prompt,
post_uncommit hook, new bug-url command. Dozen of bugs fixed as well.

 * Add post_uncommit hook to remember the uncomitted commit message.
 * Add interactive prompt for password if access to the branch require it.
 * Add throbber feature: user will see message "Loading..." and animation
   when there is long operation in progress to indicate that qbzr window
   is not hang.
 * Command-line interface to QBzr commands now is much closer to
   coresponding commands in bzr itself. Where possible commands
   options are reused from bzr. (#272359)
 * qcommit:
   * Commit without message is forbidden (#297606).
   * If no files selected to commit then user will be asked
     for confirmation. Commit without files allowed only 
     when bzr >= 1.6 is used. (#148165)
 * qdiff:
   * To detect binary files entire file content is analyzed, not only first 1K.
   * Short option name for --deleted changed from -D to -K.
   * If there is no changes in the tree or specified file list (file group)
     then show info box with "No changes found" message (#295767).
   * Unidiff produce valid headers. (#308095)
 * qlog: multiple improvements for showing common log of multiple branches.
 * qpull and qmerge in lightweight checkouts now working for the tree, 
   not for the master branch. (#310314)
 * New command bug-url (console only) can show you full URL to bug number
   and optionally open this URL in your browser.
 * New translations added: Hebrew, Polish.


0.9.5 - 2008-11-03
----------------------
Maintenance release: various bugfixes and bunch of small improvements.

New features:

 * qcat:
   * New command-line option `--native` to show file content in native
     application rather than in usual QCat window. (experimental)
 * qtag: new command to edit tags.
 * New translation added: Turkish

NOTES: when upgrading old installation (<0.9.2) of QBzr to 0.9.5,
please uninstall or remove old files first.


0.9.4 - 2008-09-20
----------------------
This release provide many new features and new commands,
and many improvements and bugfixes to existing commands.

New commands, similar to standard bzr commands:
 qadd, qinfo, qinit, qmerge and qrevert

New 'hybrid' commands:
 qgetnew, qgetupdates, qinit

Hybrid commands provide universal interface to several similar
bzr functions in one dialog and supposed to be configurable
via dialog options.

This release is also contains next improvements: all q-commands
now lazily registered to to minimalize the bzr startup time;
autocompleter in qcommit now understand more programming languages, 
not only C/Python; qcommit trying to spell check your commit message,
if you have PyEnchant installed; qannotate and qdiff(!) highlight
syntax of source code files; qlog can use bzr-search plugin for
searching in history; qlog can show combinated history for several
branches from one shared repository.

Here the list of most user-visible changes since 0.9.3:

 * qadd, qinfo, qinit, qmerge and qrevert:
    * Added new commands.
 * qannotate:
    * A working tree is no longer required to annotate a file.
    * The column widths are resize automaticly.
    * Syntax highlighting of annotated file (Pygments library required).
 * qbrowse:
    * A context menu item has been added to annotate a file.
 * qcommit:
    * Improved auto-completer understand more programming languages.
    * Checkbox to select/deselect all files
    * Simple spell checker support (required PyEnchant library)
    * Ignored items no longer shown.
 * qdiff:
    * A checkbox has been added to control weather a Complete diff is shown.
    * Syntax highlighting of shown files (Pygments library required).
    * Diffing across 2 branches.
    * Show revno in the window title not revid if possible.
 * qlog:
    * The graph is now not hidden when you search.
    * Improved graph layout.
    * The graph now shows lines for sprouts and roots.
    * You can specify multiple branches, or multiple files or a repository as a
      location. Heads from different branches are labeled.
    * Pending merges are shown.
    * A refresh button has been added.
    * If you have bzr-search installed, and the branch you are viewing has index,
      you can search using the index. (#251468)
 * qgetnew
    * New 'hybrid' command to fetch a new working tree.  The dialog allows
      you to choose if you want to 'branch' or 'checkout' the source.
 * qgetupdates
   *  new 'hybrid' command to update a working tree: involves 2 dialogs,
      one shown if the tree is a checkout, and the other if it is a branch.
 * New translation added: Galician

NOTES: when upgrading old installation (<0.9.2) of QBzr to 0.9.4,
please uninstall or remove old files first.


0.9.3 - 2008-08-19
----------------------
Maintenance release:

 * qcommit:
    * Double-click on pending merge show changes properly (#252879).
    * Better support for compiz (#245419).
    * New command-line options: --local and --message (#253613).
 * qdiff: 
    * Added a refresh button (#252191).
    * Workaround for random segfault of qdiff due the bug in bzrlib's
      C implementation of patience diff sequence matcher.
    * Show x-bit (+x) property for added/removed files in side-by-side view.
 * qlog: 
    * When you search on revision id or revision number, it selects the
      revision that matches, rather than filtering the ones that don't. 
      This also faster.
    * New revision details view.
    * Fixed problem with showing merges for some branches (#255265).
    * Support for Redmine bug URLs.
 * merge --qpreview:
    * workaround for bug in bzrlib's PreviewTree related to renamed files
      (#251537).
 * qpull/qbranch:
    * Better detection of bzr executable for the case of standalone bzr.exe
      (#256793).
 * New translations: Dutch, French, Italian, Japanese

Launchpad Translations service re-enabled for translations of QBzr strings.

NOTES: when upgrading old installation (<0.9.2) of QBzr to 0.9.3, 
please uninstall or remove old files first.


0.9.2 - 2008-07-22
----------------------
This release is first step towards QBzr 1.0.

In this release QBzr introduce new qlog view with nice graph of revisions.
qcat window now allow you to see images as images, binary files as hex dump,
and target for versioned symlink. Side-by-side diff now able to show changes 
in image files; side-by-side and unidiff will show you changes in executable 
bit as well. Also you can specify in command line which files 
(added/removed/modified/renamed) you want to see in qdiff.

Also there is many other improvements and many bugfixes. 
See the list of user-visible changes below.

NOTES: when upgrading old installation of QBzr to 0.9.2, please uninstall
or remove old files first.

 * qannotate: 
    * Show tags (if any) for revision in revision message view (#149246)
 * qbrowse: 
    * Now supports any kind of URLs as branch location, not only local
      paths (#241930)
    * Double-click on file opens qcat window and show file content
      (#148028). Also user can run this action via context menu -> View file
 * qcat: 
    * Show content of image file as image (#242070) and hex dump for other
      binary files
    * Now able to show symlink target. Window title better reflects content
      type
 * qcommit: 
    * Don't show entire filename as extension if name started with dot
      (e.g. for .bzrignore files)
    * Set focus on Message Edit area if there is no saved message;
      otherwise set focus on OK button (#215271)
    * UI improvements:
        * user can walk with Tab key over all control widgets (#243177);
        * message saved not only when user press Cancel, but on other closing
          actions too (e.g. Alt+F4);
        * Ctrl+Enter in message edit area triggers commit action (#148156)
 * qdiff: 
    * Options to filter diff output (to see added/deleted/modified/renamed 
      files in any combination)
    * Show label '[binary file]' for modified binary files (#165006)
    * Images are shown in side by side diff. (#242083)
    * Window loads straight away, and the diff loads incrementaly in the
      background, showing files that have be diffed as the become availible.
      (#174964)
    * Show changes in x bits. (#153817)
 * qlog: 
    * Always show location even in the case it runs as ``bzr qlog``
    * Add a revision graph that can be expanded and collapsed. (#242752)
 * qdiff, qcat, qannotate: Font sizes are no longer set a a small 8pt. They
   now use the default widget font size. (#240859)


0.9.1 - 2008-06-17
----------------------
Maintenance release:

 * qannotate: fixing incompatibility with Python 2.4.x 
   in decoding lines to unicode (#209467)
 * qbrowse->qlog->qdiff: properly lock repository before
   invoking qdiff window (#209875)
 * qconfig no more fails if whoami missed e-mail. (#239534)
 * catching PyQt4 ImportError and show to user explanation
   message instead a traceback. (#240123, #163728)
 * Fix "QPainter::begin: A paint device can only be painted 
   by one painter at a time." warning from Qt (#234965)

Translations was updated; Spanish translation added.
Launchpad Rosetta service no more used for translations.
See "Help translate" section in README.txt for details.

0.9.0 - 2008-03-29
----------------------

 * New commands: qpull, qpush, qbranch
 * New qannotate view
 * Search for author names, revision ids/numbers in qlog
 * Fixed single-file diff of renamed file in qlog
 * Display child revision links in qlog
 * New option for local commit in qcommit
 * Handle empty revision specified in qbrowse
 * Display author names instead of committer names in qbrowse
 * Fixed `qbrowse -rN`
 * Fixed getting of modified files in qlog opened from qbrowse

0.8.0 - 2007-12-08
------------------

 * qannotate:
    * Double clicking history in annotate window should open diff window.
      (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #148024)
 * qbrowse:
    * Context menu "Show log" now actually works.
      (Alexander Belchenko, Mario del Pozo, #147434)
 * qcat:
    * Show contents of a file in a particular revision.
      (Lukﾃ｡ﾅ｡ Lalinskﾃｽ)
 * qcommit:
    * Ask for confirmation when trying to commit with empty message.
      (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #173327)
    * Remember the last message on cancel or error.
      (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #149743)
 * qconfig:
    * New command. (Lukﾃ｡ﾅ｡ Lalinskﾃｽ)
 * qdiff:
    * Removed unused option --inline. (Alexander Belchenko, #148409)
    * Fix a special case where the line in the HTML view still contained
      newline characters. (Lukﾃ｡ﾅ｡ Lalinskﾃｽ)
    * Fix failure for modified file in moved directory. (Lukﾃ｡ﾅ｡ Lalinskﾃｽ)
 * qlog:
    * Add a global branch lock around qlog to make showing of modified
      files on packs faster. (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #173327)
    * Use a flat list for single-file log. (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #172558)
    * Display text with the right color for selected but non-active lines
      with tags/bugs. (Alexander Belchenko)
    * Open a single-file diff window after double-clicking on a file.
      (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #148410)
    * Search in commit messages. (Lukﾃ｡ﾅ｡ Lalinskﾃｽ, #162952)

0.7.1 - 2007-11-17
------------------

 * Custom implementation of global bzr option 'change' used by qdiff,
   to provide support of bzr older than 0.91. (#162875)
 * qannotate no more try to read revisions outside of text origins.
   (#151458, #162505)
 * Windows installers contain compiled translations files. (#162951)

0.7.0 - 2007-11-10
------------------

 * Added version info for 'bzr plugins'.
 * Gettext support.
 * Remember window sizes and states. (#148157)
 * qdiff:
    * New command line option '-c'.
    * Optional unified diff view.
    * Use per-branch 'encoding' option to decode source code. (#148159)
 * qlog:
    * Display text with the right color for selected lines with
      tags/bugs. (#147998)
    * Use os.startfile to open external links if the webbrowser module
      is not available. (#148002)
    * Add the Diff button in the Log dialog.
    * Display only the committer/author name in revision lists.
 * qcommit:
    * Fixed commit with pending merges. (#148849)
    * Allow reverting and viewing changes of multiple files in qcommit.
    * Double click on a pending merged revision will show the changes.
    * Fixed pre-selecting of files specified on the command line.

0.6.0 - 2007-09-06
------------------

 * Support for --fixes and --author eqivalents in the commit dialog.
 * Display fixed bugs in the log view.
 * Changed color of tags to yellow (to make it more consistant with gitk/hgk).
 * Faster diff viewing from the log window.
 * Pending merges in the commit dialog are now displayed as a flat list.
 * PyQt 4.3 fixes.

0.5.0 - 2007-07-29
------------------

 * Improved annotation viewer.
 * Fixed Windows installer (included the Queue Python module).

0.4.0 - 2007-07-20
------------------

 * qbrowse of a new branch errors (#113602)
 * Support for diffing of two working trees.
 * Display pending merges in the commit dialog.
 * Display tags in the log view.
 * Fixed working tree locking for qannotate by using tree.path2id
   instead of tree.inventory.path2id. (#121631)
 * New diff viewer.

0.3.1 - 2007-03-15
------------------

 * Compatibility with bzr 0.15

0.3.0 - 2007-03-09
------------------

 * Rewritten diff viewer:
   * Now works also with binary files.
   * Displays more information about the files.
 * qbrowse uses native system icons instead of the Tango ones.
 * Windows installer for the 'standalone' Bazaar package.

0.2.0 - 2007-02-02
------------------

 * Bug Fixes:
   * qdiff
     * Fixed highlighting of inter-line changes containing HTML.
   * qcommit
     * The editor now doesn't accept rich-text.

 * New Features:
   * qdiff
     * Configurable window size.
   * qcommit
     * Non-versioned are hidden by default, add a checkbox to show them.
     * Auto completion of file and variable/class/function names (only for
       Python source code right now, but it's easily extendable for other
       languages).
     * Added option to revert a file from the commit dialog.

0.1.0 - 2006-12-26
------------------

 * Initial release.