~sambuddhabasu1/mailman/fix_mailman_run

~sambuddhabasu1/mailman/fix_mailman_run_error » Changes from revision 6537

From Revision 6537 to 6518

Rev	Summary	Authors	Date
6537	Move the pending database into the SQLAlchemy/Elixir layer. ... Move the pending database into the SQLAlchemy/Elixir layer. The old Pending.py module is removed. Added an interface to this functionality such that any IPendable (essentially a key/value mapping) can be associated with a token, and that token can be confirmed and has a lifetime. Any keys and values can be stored, as long as both are unicodes. Added a doctest. Modified initialization of the database layer to support pluggability via setuptools. No longer is this layer initialized from a module, but now it's instantiated from a class that implements IDatabase. The StockDatabase class implements the SQLAchemy/Elixir layer, but this can be overridden in a setup.py. Bye bye MANAGERS_INIT_FUNCTION, we hardly knew ye. Added a package Mailman.app which will contain certain application specific functionality. Right now, the only there there is an IRegistar implementation, which didn't seem to fit anywhere else. Speaking of which, the IRegistrar interface implements all the logic related to registration and verification of email addresses. Think the equivalent of MailList.AddMember() except generalized out of a mailing list context. This latter will eventually go away. The IRegistrar sends the confirmation email. Added an IDomain interface, though the only implementation of this so far lives in the registration.txt doctest. This defines the context necessary for domain-level things, like address confirmation. A bunch of other cleanups in modules that are necessary due to the refactoring of Pending, but don't affect anything that's actually tested yet, so I won't vouch for them (except that they don't throw errors on import!). Clean up Defaults.py; also turn the functions seconds(), minutes(), hours() and days() into their datetime.timedelta equivalents. Consolidated the bogus email address exceptions. In some places where appropriate, use email 4.0 module names instead of the older brand. Switch from Mailman.Utils.unique_message_id() to email.utils.make_msgid() everywhere. This is because we need to allow sending not in the context of a mailing list (i.e. domain-wide address confirmation message). So we can't use a Message-ID generator that requires a mailing list. OTOH, this breaks Message-ID collision detection in the mail->news gateway. I'll fix that eventually. Remove the 'verified' row on the Address table. Now verification is checked by Address.verified_on not being None.	Barry Warsaw	17 years ago
6536	Remove an empty file Remove an empty file	Barry Warsaw	17 years ago
6535	Remove last vestiges of dbcontext Remove last vestiges of dbcontext	Barry Warsaw	17 years ago
6534	The start of a message store definition. Whether this will ... The start of a message store definition. Whether this will end up being used for the archive or not is left to be seen. Define an interface, test, and implementation of a basic message store using globally unique identifiers of the form: archive/hash/seqno - archive is the base url of the archive, e.g. http://archives.example.com. This is available in the List-Archive header. - hash is the base32 encoded sha1 hash of the message's Message-ID and Date headers, which it must have. This is available in the X-List-ID-Hash header. - seqno is a sequence number specific to the archive which will uniquely identify the message should there be a Message-ID/Date collision. this is available in the X-List-Sequence-Number header. Added a MESSAGES_DIR variable to the config. Added a .message_store attribute to the config.	Barry Warsaw	17 years ago
6533	Some updates Some updates	Barry Warsaw	17 years ago
6532	Merge the setuptools branch. Fix a couple of test modules t... Merge the setuptools branch. Fix a couple of test modules that are disabled anyway.	Barry Warsaw	17 years ago
6531	Detect 'who' with 1 or 2 arguments as administrivia. Detect 'who' with 1 or 2 arguments as administrivia.	Mark Sapiro	17 years ago
6530	Last bit of existing test suite cleanup for now. I've remov... Last bit of existing test suite cleanup for now. I've removed the inmemory.py module since we're not using that any more. I've also disabled the remaining failing tests in test_handlers and test_security_mgr. Because of the unified user database, both of these modules will change significantly, but I don't want to remove them just yet.	Barry Warsaw	17 years ago
6529	Convert the Scrubber test to a doctest, and fix Scrubber.py,... Convert the Scrubber test to a doctest, and fix Scrubber.py, but otherwise don't modernize the Scrubber handler. The is the last of the handler test conversions until we figure out what to do with the Approve handler. In a unified user database the semantics of this are unclear.	Barry Warsaw	17 years ago
6528	Convert ToArchive tests to doctests and do a minimal amount ... Convert ToArchive tests to doctests and do a minimal amount of handler module cleanup (really, not much was necessary).	Barry Warsaw	17 years ago
6527	Conversion of the ToDigest tests to doctests, along with jus... Conversion of the ToDigest tests to doctests, along with just enough handler module update to make the thing pass. Much more coverage is still necessary, but this at least recreates the existing tests. Changes to the test infrastructure to make REPORT_ONLY_FIRST_FAILURE conditional on lower (default) verbosity. Increase the verbosity via 'bin/testall -v' and you get all the failure output.	Barry Warsaw	17 years ago
6526	Convert ToOutgoing handler to a doctest. Minor cleanup of t... Convert ToOutgoing handler to a doctest. Minor cleanup of the handler code to a more modern Python style.	Barry Warsaw	17 years ago
6525	Convert the ToUsenet handlerto a doctest. No other handler ... Convert the ToUsenet handlerto a doctest. No other handler clean up is included.	Barry Warsaw	17 years ago
6524	Convert MimeDel tests to doctest. No other changes to the h... Convert MimeDel tests to doctest. No other changes to the handler module are made.	Barry Warsaw	17 years ago
6523	Convert the SpamDetect handler tests (what there was of them... Convert the SpamDetect handler tests (what there was of them anyway) to a doctest, but don't otherwise clean up the handler module.	Barry Warsaw	17 years ago
6522	Convert the TestTagger to a doctest. No other cleaning up o... Convert the TestTagger to a doctest. No other cleaning up of the handler module is done.	Barry Warsaw	17 years ago
6521	Convert TestHold to a doctest and update code as necessary. ... Convert TestHold to a doctest and update code as necessary. No general modernization of Hold.py was performed.	Barry Warsaw	17 years ago
6520	Convert TestFileRecips to a doctest, and update the handler ... Convert TestFileRecips to a doctest, and update the handler to more modern Python idioms. The recipients are now returned as a set instead of a list, so duplicates are quashed. In MailList.InitTempVars() we need to create the list's data directory when the list is initialized. If the directory already exists, this does nothing.	Barry Warsaw	17 years ago
6519	Convert failing test_message.py to doctests bounces.txt and ... Convert failing test_message.py to doctests bounces.txt and message.txt, which of course now succeed. Rename Bouncer.py's BounceMessage() method to bounce_message() and remove the 'msgdata' parameter, which wasn't being used. Change the RejectNotice exception class to expose .notice directly, as there's no reason for this to be an accessor or property. Move the coverage.py installation to the install-packages target instead of the install-other target, so that it only gets installed once the pythonlib directory is created.	Barry Warsaw	17 years ago
6518	Add support for code coverage with 'testall --coverage'. Ho... Add support for code coverage with 'testall --coverage'. However, I'm not convinced this is totally accurate as a full test run shows almost no coverage in the Mailman.database.model modules even though I /know/ they're getting executed. I'll need to figure this out, but eventually we'll convert fully to setuptools and then we'll use the nosetests to do testing and coverage.	Barry Warsaw	17 years ago

Older »