~smoser/maas-images/trunk.no-dyn-netconf : changes

~smoser/maas-images/trunk.no-dyn-netconf » Changes from revision 391

From Revision 391 to 372

Rev	Summary	Authors	Date
391	Do not install cloud-initramfs-dyn-netconf in releases newer... Do not install cloud-initramfs-dyn-netconf in releases newer than xenial. The cloud-initramfs-dyn-netconf was being added to the maas image. It was only absolutely necessary in <xenial, but is left as present in xenial as images still use the /etc/network/interfaces link. See change="symlink ENI for cloud-initramfs-dyn-netconf". It is not needed in or used without ifupdown, and ifupdown is not present in artful or bionic.	Scott Moser	6 years ago
390	Always create squashfs image if configured. Always create squashfs image if configured. For precise in the v3 stream there was no 'squashfs' image created. This was enabled only if input to the build was '.tar.gz' or 'squashfs'. As we need a squashfs image for installing precise with maas 2.3+, we modify the code here to build that image. Note that this squashfs image is known to not boot with rooturl as the other squashfs images produced do.	Scott Moser	6 years ago
389	precise: remove reference to non-existing package linux-sign... precise: remove reference to non-existing package linux-signed-generic. Apparently there was no signed generic kernel for precise GA. Specifically, there is no: linux-signed-generic but there is: linux-signed-generic-lts-quantal linux-signed-generic-lts-raring linux-signed-generic-lts-saucy linux-signed-generic-lts-trusty	Scott Moser	6 years ago
388	Cleanups around use of --proposed. Cleanups around use of --proposed. The --proposed flag was not getting all the way through to kpack-from-image. This modification just gets it set all the way through. It isn't strictly needed, because the image that it runs in will have proposed enabled already, but passing it through makes it more obvious. In kpack-from-image, use the same .list file name that is used in maas-cloudimg2eph and also enable universe and multiverse as are done there. Also some cleanups: - dist_upgrade was set to 'false' by default, but then enabled to either 'true' or '1'. Just be consistent and set to true to avoid confusion. - fix a debug message that reported about ppa when it should have reported about proposed.	Scott Moser	6 years ago
387	Stop grub scripts from running when updating an image. Stop grub scripts from running when updating an image. An upgrade that brought a new kernel would cause grub's kernel hook scripts to run. Those would fail to run and cause build failure (at least in trusty). This is similar to code that is currently in the kpack-from-image, but handles putting things back more elegantly. (kpack-from-image doesn't have to put things back). I found this when running with '--proposed' and trusty.	Scott Moser	6 years ago
386	Add zfs module and dependencies to generated initramfs. Add zfs module and dependencies to generated initramfs. In order for curtin to use zfs, it has to have access to the modules. Add 'zfs' and its dependencies to the initramfs. Note that the user-space tools (zfsutils-linux) are not currently a dependency of ubuntu-server and are thus not in the squashfs images. That means that for curtin to use zfs it has to install the package. The package handles loading zfs module.	Scott Moser	6 years ago
385	LP: #1711203 - Produce streams with signed kernels on amd64 LP: #1711203 - Produce streams with signed kernels on amd64	Lee Trager	6 years ago
384	remove a warning that is no longer relevant. remove a warning that is no longer relevant. If you ran this on precise, you'd get a warning. The warning was also shown on bionic due to the way it compared. Since it was only intended to show on releases older than trusty and there are no supported releases older than trusty... it should be safe to remove.	Scott Moser	6 years ago
383	add bionic / 18.04 / Bionic Beaver. add bionic / 18.04 / Bionic Beaver. This just updates conf/ to know about Bionic. The meph2/ubuntu_info.py change is not really necessary.	Scott Moser	6 years ago
382	maas-cloudimg2eph2: repack squash if additional archives are... maas-cloudimg2eph2: repack squash if additional archives are used. If --proposed or M2E_ADD_REPOS or M2E_ADD_PACKAGES are set, then that means we should re-pack squashfs. This check is not perfect at all, as other things might cause that, but it is required to get a new squashfs created for the path already in existance.	Scott Moser	6 years ago
381	README: add info about building with ppa or proposed. README: add info about building with ppa or proposed. This just documents functionality that was previously exposed. The usage of PPA is specifically nice for testing things.	Scott Moser	6 years ago
380	Ensure maas-images can work with newer or older distro-info. Ensure maas-images can work with newer or older distro-info.	Lee Trager	7 years ago
379	Fix call to centos_apply_network_config to only pass in 'net... Fix call to centos_apply_network_config to only pass in 'network' config.	Lee Trager	7 years ago
378	Use Canonical's version of cloud-init in the CentOS images. Use Canonical's version of cloud-init in the CentOS images.	Lee Trager	7 years ago
377	Add support to CentOS 6 and 7 for network config and cloudco... Add support to CentOS 6 and 7 for network config and cloudconfig. This adds the ability for the CentOS curthooks to make use of the 'centos_apply_network_config' function of new curtin version. Also adds the ability to handle 'cloudconfig' entries in curtin config dictionary. It does this by utilizing 'write_files' from curtin.futil. It also adds a short term legacy-curtin fallback for older curtin import paths.	Lee Trager	7 years ago
376	If the SquashFS config option is set convert root-image.gz t... If the SquashFS config option is set convert root-image.gz to a SquashFS image. When the SquashFS config option is set and upstream is only providing a root-image.gz convert the root-image.gz into a SquashFS image. Both images are included in the stream however MAAS will only use the SquashFS image.	Lee Trager	7 years ago
375	Detect arch with dpkg --print-architecture Detect arch with dpkg --print-architecture	Lee Trager	7 years ago
374	Include the i2c-thunderx driver on ARM64 only. Include the i2c-thunderx driver on ARM64 only. Enlistment fails on Cavium ThunderX systems as the IPMI SSIF interface requires the i2c-thunderx module to access the BMC. Include the i2c-thunderx driver in the published ARM64 initrds.	Lee Trager	7 years ago
373	bin/kpack-from-image: install rooturl if not already install... bin/kpack-from-image: install rooturl if not already installed. This modifies the build of the initramfs so that they include cloud-initramfs-rooturl. It will fail if that package is not available. cloud-initramfs-rooturl is marked for SRU to current releases under bug 1688606. The code will install the package in precise if it is available but not fail if not available. On other releases that is fatal.	Scott Moser	7 years ago
372	ubuntu_info: remove the path that did not require distro-inf... ubuntu_info: remove the path that did not require distro-info At one point we had a functional path that did not require installation of python-distro-info. At some point that path broke because we were exporting data in REL2VER was not accounted for in the __RELEASE_DATA. Specifically missing was 'supported'. The primary path that was enabled by the hard coded data was testing with a new distro info before the package was sru'd. To account for that I've put a comment in the code showing how one can be added. As a drive-by, this also adds the 'release_date' field to the data exported.	Scott Moser	7 years ago

Older »