~toykeeper/flashlight-firmware/anduril2 : changes

~toykeeper/flashlight-firmware/anduril2 » Changes from revision 659

From Revision 606 to 587

Rev	Summary	Authors	Date
606	calibrated KR4 jump-start-moon, may be too high on some olde... calibrated KR4 jump-start-moon, may be too high on some older hardware	Selene Scriven	2 years ago
605	KR4 thermal regulation no longer needs overrides, because dy... KR4 thermal regulation no longer needs overrides, because dynamic PWM makes the defaults work better (the overrides were mostly needed as a side effect of having 1024 PWM steps instead of 256)	Selene Scriven	2 years ago
604	got PFM / dynamic PWM actually working on Noctigon KR4 got PFM / dynamic PWM actually working on Noctigon KR4 (and also added "jump start moon" to it) (and generally finished adding dynamic PWM support to FSM)	Selene Scriven	2 years ago
603	changed Noctigon KR4 from fixed to dynamic PWM TOP value, fo... changed Noctigon KR4 from fixed to dynamic PWM TOP value, for later use	Selene Scriven	2 years ago
602	made PWM TOP value configurable at command line in level_cal... made PWM TOP value configurable at command line in level_calc.py, and added a "dynamic PWM" feature (uses a different PWM TOP at each of the first N ramp levels, to increase resolution at bottom end of ramp)	Selene Scriven	2 years ago
601	added a "jump start moon" option for hold-from-off, for ligh... added a "jump start moon" option for hold-from-off, for lights with slow-activating circuits (briefly pulses the light at a higher level to wake up the circuit faster)	Selene Scriven	2 years ago
600	made blink_once() brightness configurable per build made blink_once() brightness configurable per build	Selene Scriven	2 years ago
599	document the actual maximum for manual memory timer (~140 mi... document the actual maximum for manual memory timer (~140 minutes, not 255)	Selene Scriven	2 years ago
598	added Nichia 219B build for KR4 and K9.3, adjusted 219C buil... added Nichia 219B build for KR4 and K9.3, adjusted 219C builds, for intl-outdoor	Selene Scriven	2 years ago
597	allow building only some targets, instead of always doing al... allow building only some targets, instead of always doing all	Selene Scriven	2 years ago
596	summarize results at end of batch build process summarize results at end of batch build process	Selene Scriven	2 years ago
595	give a more useful error message when t1616 files aren't ins... give a more useful error message when t1616 files aren't installed	Selene Scriven	2 years ago
594	rewrote hybrid memory (manual memory timer) to eliminate cor... rewrote hybrid memory (manual memory timer) to eliminate corner cases Old method: - at 1-click power-on, choose a brightness based on off-time (manual level or last-ramped level) New method: - when off longer than the timer, set last-ramped level to manual level This fixes a bug: - turn light off - wait for timer - turn light on with a shortcut to moon - turn light off - turn light on - pre-patch, light went to last-ramped level instead of manual level This change also reduces the ROM size slightly.	Selene Scriven	2 years ago
593	added Emisar D18 Nichia 219 build target (same as normal but... added Emisar D18 Nichia 219 build target (same as normal but reduced FET power)	Selene Scriven	2 years ago
592	set Emisar/Noctigon "219" builds to 65% FET power set Emisar/Noctigon "219" builds to 65% FET power (was 75% or 80% before) (change requested by Emisar)	Selene Scriven	2 years ago
591	added missing ifdefs for compiling without USE_SIMPLE_UI added missing ifdefs for compiling without USE_SIMPLE_UI (compiles now, but isn't tested on hardware)	Selene Scriven	2 years ago
590	oops, somehow I forgot to add this earlier... Hank's UI pre... oops, somehow I forgot to add this earlier... Hank's UI preferences (applies to all Emisar / Noctigon lights)	Selene Scriven	2 years ago
589	made manual memory remember tint too, not just brightness made manual memory remember tint too, not just brightness	Selene Scriven	2 years ago
588	aux LED config cleaning... aux LED config cleaning... - use fancy blinking mode by default (define USE_OLD_BLINKING_INDICATOR if old slow mode is wanted) - remove TICK_DURING_STANDBY from all cfg-.h files because it's enabled automatically by other features anyway (autolock, memory timer) - remove STANDBY_TICK_SPEED from cfg-.h because all the values matched the default anyway so it was redundant - set rot66 button LED to high+blinking instead of high+off (it was only "off" because it ran out of space, and that was resolved) - enabled fancier indicator by default on fireflies-ui and rampingiosv3, since its other #define clauses were removed (not sure if those older UIs still compile, but if so, it's worth at least trying not to break it)	Selene Scriven	3 years ago
587	config updates for Hank (Emisar / Noctigon): config updates for Hank (Emisar / Noctigon): - use cycling rainbow mode by default on lights with RGB LEDs (instead of voltage, because it's better for impressing new users) - use 2C turbo instead of 2C ceiling (Anduril 1 style instead of Anduril 2 style) also some other minor housekeeping... - make all K1 models use consistent rainbow cycling speed - enable auto-lock and manual memory timer on Emisar D1v2 - remove redundant RGB config on Lume1 (it had incorrect comments anyway)	Selene Scriven	3 years ago