~toykeeper/flashlight-firmware/anduril2 : changes

~toykeeper/flashlight-firmware/anduril2 » Changes from revision 659

From Revision 659 to 640

Rev	Summary	Authors	Date
659	This branch is abandoned. Development of Anduril and FSM ha... This branch is abandoned. Development of Anduril and FSM has moved to: https://github.com/ToyKeeper/anduril ... and in case it moves again, this link redirects to the current platform: https://toykeeper.net/anduril So go there instead of Launchpad.	Selene ToyKeeper	26 days ago
658	merged multi-channel branch with a major refactor and half a... merged multi-channel branch with a major refactor and half a year of updates	Selene ToyKeeper	28 days ago
657	added a "tactical mode" on "Off -> 6C" added a "tactical mode" on "Off -> 6C" Tactical Mode is similar to Momentary Mode or Lockout Mode, but it has three mode slots which are independent of other config values. The default is a classic tactical setup with "high, low, strobe", each with immediate activation as soon as the button is pressed. Each slot can be a regular ramp level 1 to 150, or a strobe-group mode. To exit, press 6C or loosen/tighten the tailcap. Aux LEDs follow the same pattern as Lockout Mode. To configure, use 7H. There are 3 options, one for each slot. Enter a number 1 to 150 for a ramp mode, 0 for current strobe, or 151+ for a specific strobe mode.	Selene ToyKeeper	8 months ago
656	strobe modes: added 4C to cycle backward through strobes strobe modes: added 4C to cycle backward through strobes	Selene ToyKeeper	8 months ago
655	just whitespace / comments just whitespace / comments	Selene ToyKeeper	8 months ago
654	fast-blink the aux LED in standby when battery is low fast-blink the aux LED in standby when battery is low 3.3V and up: normal aux LED modes 2.9V to 3.3V: fast blink under 2.9V: off (only on lights with no RGB aux)	Selene ToyKeeper	9 months ago
653	fixed voltage calibration resolution on SP10 Pro fixed voltage calibration resolution on SP10 Pro and other devices which use a voltage divider (it was 0.1V per step, and is now 0.05V per step)	Selene ToyKeeper	1 year ago
652	allow supporting single-color and RGB side button in the sam... allow supporting single-color and RGB side button in the same build (new D1v2 comes in both flavors, and it's easier for everyone if they can use the same firmware) Also, removed lockout-abort bug on D1v2 (and DM11, I think). Hopefully some day I'll have time to update to a newer compiler, and then hopefully it won't have this issue any more... but for now, it still uses a kludge to trick the compiler into working.	Selene ToyKeeper	1 year ago
651	added Emisar D1v2 models (old FET+7135, new linear+FET, new ... added Emisar D1v2 models (old FET+7135, new linear+FET, new linear-only)	Selene ToyKeeper	1 year ago
650	fixed level_calc.py when using --pwm with 4 args instead of ... fixed level_calc.py when using --pwm with 4 args instead of 5	Selene ToyKeeper	1 year ago
649	merged sp10-pro shutoff fix and mt35-mini support merged sp10-pro shutoff fix and mt35-mini support	Selene ToyKeeper	1 year ago
648	just a couple quick notes on using attiny1616, since the pro... just a couple quick notes on using attiny1616, since the process is still evolving	Selene ToyKeeper	1 year ago
647	revert spurious change to version.h revert spurious change to version.h (forgot to revert it after build test, before merge commit)	Selene ToyKeeper	1 year ago
646	merged sofirn sp10-pro branch (should have done it months ag... merged sofirn sp10-pro branch (should have done it months ago, but forgot)	Selene ToyKeeper	1 year ago
645	k9.3 tint-toggle build is broken, generate a better fail err... k9.3 tint-toggle build is broken, generate a better fail error (until it's fixed)	Selene ToyKeeper	1 year ago
644	added KR4-12V build, fixed model number for DM11-SBT90 build added KR4-12V build, fixed model number for DM11-SBT90 build	Selene ToyKeeper	1 year ago
643	added Noctigon DM11-SBT90.2 build added Noctigon DM11-SBT90.2 build (which is mostly like the regular linear+FET build, but has the switch on a different pin for some reason)	Selene ToyKeeper	1 year ago
642	fixed bug where tint-ramping could end up 1 brightness ramp ... fixed bug where tint-ramping could end up 1 brightness ramp step different than it started	Selene ToyKeeper	1 year ago
641	Added "Lockout 3C -> Off", changed Lockout 4H blink (light) ... Added "Lockout 3C -> Off", changed Lockout 4H blink (light) to a blip (dark), adjusted a couple builds which overflowed.	Selene ToyKeeper	1 year ago
640	enabled SOS mode on lights which have enough room for it enabled SOS mode on lights which have enough room for it	Selene ToyKeeper	1 year ago

Older »