~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.1.141

Rev	Summary	Authors	Date
483.1.121	got PFM / dynamic PWM actually working on Noctigon KR4 got PFM / dynamic PWM actually working on Noctigon KR4 (and also added "jump start moon" to it) (and generally finished adding dynamic PWM support to FSM)	Selene Scriven	3 years ago
483.1.120	changed Noctigon KR4 from fixed to dynamic PWM TOP value, fo... changed Noctigon KR4 from fixed to dynamic PWM TOP value, for later use	Selene Scriven	3 years ago
483.1.119	made PWM TOP value configurable at command line in level_cal... made PWM TOP value configurable at command line in level_calc.py, and added a "dynamic PWM" feature (uses a different PWM TOP at each of the first N ramp levels, to increase resolution at bottom end of ramp)	Selene Scriven	3 years ago
483.1.118	added a "jump start moon" option for hold-from-off, for ligh... added a "jump start moon" option for hold-from-off, for lights with slow-activating circuits (briefly pulses the light at a higher level to wake up the circuit faster)	Selene Scriven	3 years ago
483.1.117	made blink_once() brightness configurable per build made blink_once() brightness configurable per build	Selene Scriven	3 years ago
483.1.116	document the actual maximum for manual memory timer (~140 mi... document the actual maximum for manual memory timer (~140 minutes, not 255)	Selene Scriven	3 years ago
483.1.115	added Nichia 219B build for KR4 and K9.3, adjusted 219C buil... added Nichia 219B build for KR4 and K9.3, adjusted 219C builds, for intl-outdoor	Selene Scriven	3 years ago
483.1.114	allow building only some targets, instead of always doing al... allow building only some targets, instead of always doing all	Selene Scriven	3 years ago
483.1.113	summarize results at end of batch build process summarize results at end of batch build process	Selene Scriven	3 years ago
483.1.112	give a more useful error message when t1616 files aren't ins... give a more useful error message when t1616 files aren't installed	Selene Scriven	3 years ago
483.1.111	rewrote hybrid memory (manual memory timer) to eliminate cor... rewrote hybrid memory (manual memory timer) to eliminate corner cases Old method: - at 1-click power-on, choose a brightness based on off-time (manual level or last-ramped level) New method: - when off longer than the timer, set last-ramped level to manual level This fixes a bug: - turn light off - wait for timer - turn light on with a shortcut to moon - turn light off - turn light on - pre-patch, light went to last-ramped level instead of manual level This change also reduces the ROM size slightly.	Selene Scriven	3 years ago
483.1.110	added Emisar D18 Nichia 219 build target (same as normal but... added Emisar D18 Nichia 219 build target (same as normal but reduced FET power)	Selene Scriven	3 years ago
483.1.109	set Emisar/Noctigon "219" builds to 65% FET power set Emisar/Noctigon "219" builds to 65% FET power (was 75% or 80% before) (change requested by Emisar)	Selene Scriven	3 years ago
483.1.108	added missing ifdefs for compiling without USE_SIMPLE_UI added missing ifdefs for compiling without USE_SIMPLE_UI (compiles now, but isn't tested on hardware)	Selene Scriven	4 years ago
483.1.107	oops, somehow I forgot to add this earlier... Hank's UI pre... oops, somehow I forgot to add this earlier... Hank's UI preferences (applies to all Emisar / Noctigon lights)	Selene Scriven	4 years ago
483.1.106	made manual memory remember tint too, not just brightness made manual memory remember tint too, not just brightness	Selene Scriven	4 years ago
483.1.105	aux LED config cleaning... aux LED config cleaning... - use fancy blinking mode by default (define USE_OLD_BLINKING_INDICATOR if old slow mode is wanted) - remove TICK_DURING_STANDBY from all cfg-.h files because it's enabled automatically by other features anyway (autolock, memory timer) - remove STANDBY_TICK_SPEED from cfg-.h because all the values matched the default anyway so it was redundant - set rot66 button LED to high+blinking instead of high+off (it was only "off" because it ran out of space, and that was resolved) - enabled fancier indicator by default on fireflies-ui and rampingiosv3, since its other #define clauses were removed (not sure if those older UIs still compile, but if so, it's worth at least trying not to break it)	Selene Scriven	4 years ago
483.1.104	config updates for Hank (Emisar / Noctigon): config updates for Hank (Emisar / Noctigon): - use cycling rainbow mode by default on lights with RGB LEDs (instead of voltage, because it's better for impressing new users) - use 2C turbo instead of 2C ceiling (Anduril 1 style instead of Anduril 2 style) also some other minor housekeeping... - make all K1 models use consistent rainbow cycling speed - enable auto-lock and manual memory timer on Emisar D1v2 - remove redundant RGB config on Lume1 (it had incorrect comments anyway)	Selene Scriven	4 years ago
483.1.103	fixed missing ifdef for simple UI fixed missing ifdef for simple UI	Selene Scriven	4 years ago
483.1.102	fixed wrong word in manual (turbo is in full UI only) fixed wrong word in manual (turbo is in full UI only)	Selene Scriven	4 years ago