~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.12.154

Rev	Summary	Authors	Date
483.12.114	new light / driver: HDR boost driver by thefreeman new light / driver: HDR boost driver by thefreeman (works well in a FW3A host)	Selene ToyKeeper	1 year ago
483.12.113	raised default temperature limit to 50C on attiny1616 and ne... raised default temperature limit to 50C on attiny1616 and newer MCUs, slightly simplified gradual_tick()	Selene ToyKeeper	1 year ago
483.12.112	fixed builds for ff-e01, ff-pl47* fixed builds for ff-e01, ff-pl47* + added smooth steps - removed SOS mode	Selene ToyKeeper	1 year ago
483.12.111	sofirn-lt1s-pro: allow configuring the blink channel sofirn-lt1s-pro: allow configuring the blink channel emisar-d4k-3ch: removed redundant #define	Selene ToyKeeper	1 year ago
483.12.110	converted noctigon-m44 build, and greatly reduced flicker converted noctigon-m44 build, and greatly reduced flicker with a new ramp and some new hwdef algorithms	Selene ToyKeeper	1 year ago
483.12.109	fixed builds which weren't using set_level_zero() yet... fixed builds which weren't using set_level_zero() yet... - emisar-d4 - emisar-d4v2 - emisar-d4v2-nofet - emisar-d4sv2 - emisar-2ch - emisar-2ch-fet - noctigon-dm11-boost - noctigon-k1 - noctigon-kr4 - noctigon-kr4-nofet - sofirn-lt1s-pro ... and removed old build targets for d4sv2-tintramp, because it was replaced by emisar-2ch a while ago.	Selene ToyKeeper	1 year ago
483.12.108	fixed bug: smooth steps could sometimes turn off entirely fixed bug: smooth steps could sometimes turn off entirely when bottom step was too low (stepped ramp floor 1/150 or 2/150), instead of just stepping down (this also seemed to affect 1C from Off, when at stepped ramp floor) (but it didn't affect the smooth ramp)	Selene ToyKeeper	1 year ago
483.12.107	fixed soft start animation when using smooth ramp on turbo fixed soft start animation when using smooth ramp on turbo (it would jump up the last few levels before, instead of being smooth)	Selene ToyKeeper	1 year ago
483.12.106	renamed wurkkos-ts10-rgb to wurkkos-ts10-rgbaux renamed wurkkos-ts10-rgb to wurkkos-ts10-rgbaux (for consistency, and in case they ever make a full RGB version) (also, raised the post-off voltage brightness threshold, because these aux LEDs are pretty bright) (and updated the TS10 hwdef to the current API)	Selene ToyKeeper	1 year ago
483.12.105	made smooth steps look more natural (especially when turning... made smooth steps look more natural (especially when turning off) by using different curves for ramp-up and ramp-down	Selene ToyKeeper	1 year ago
483.12.104	added "smooth steps" a.k.a. "soft start", to make brightness... added "smooth steps" a.k.a. "soft start", to make brightness steps smoother (also made ramp extras config menu count its own steps)	Selene ToyKeeper	1 year ago
483.12.103	made bike strobe ontime configurable per build, made bike strobe ontime configurable per build, and made it longer on emisar-d4k-3ch because some channels don't flash fast enough	Selene ToyKeeper	1 year ago
483.12.102	updated wurkkos-ts25 to use set_level_zero() updated wurkkos-ts25 to use set_level_zero() (mostly as a quick test, will do the rest of the builds later)	Selene ToyKeeper	1 year ago
483.12.101	emisar-d4k-3ch auto-tint mode: fixed issue with LEDs turning... emisar-d4k-3ch auto-tint mode: fixed issue with LEDs turning off at moon, and changed algorithm to two simple crossfades instead of one funky and probably incorrect crossfade with an extra triangle in the middle (but it may be best to convert to sine-shaped crossfades instead of linear) (I can't really test this one very will since I don't have D4K hardware with red+warm+cool LEDs, so I'm guessing based on my unbalanced RGB model with the LEDs in the wrong order)	Selene ToyKeeper	1 year ago
483.12.100	fixed bug: post-off voltage used low brightness sometimes ev... fixed bug: post-off voltage used low brightness sometimes even when regular aux setting was high	Selene ToyKeeper	1 year ago
483.12.99	started splitting set_level(0) into its own set_level_zero()... started splitting set_level(0) into its own set_level_zero(), and made USE_AUX_RGB_LEDS_WHILE_ON work more like the old indicator LEDs, where it gets set automatically with set_level() Using set_level_zero() reduces space used by channel modes, and simplifies code for each mode's set_level_*() functions. I measured about 220 bytes less in the emisar-d4k-3ch build this way, while also reducing the chance of bugs.	Selene ToyKeeper	1 year ago
483.12.98	made custom 3H handler system work, added circular HSV rampi... made custom 3H handler system work, added circular HSV ramping, fixed some minor issues with LEDs not getting turned off in corner cases (strobe on channel 1 -> strobe on channel 2, 1 might not get turned off)	Selene ToyKeeper	1 year ago
483.12.97	added emisar-d4k-3ch build added emisar-d4k-3ch build	Selene ToyKeeper	1 year ago
483.12.96	added channel mode per strobe mode, and made FSM channel mod... added channel mode per strobe mode, and made FSM channel mode more flexible, and fixed issue in tactical mode where strobes wouldn't stop on button release	Selene ToyKeeper	1 year ago
483.12.95	fixed issue where tactical mode overrode strobe group memory fixed issue where tactical mode overrode strobe group memory	Selene ToyKeeper	1 year ago