~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.12.140

Rev	Summary	Authors	Date
483.12.120	converted sofirn-sp10-pro to new API converted sofirn-sp10-pro to new API	Selene ToyKeeper	1 year ago
483.12.119	reduced @wurkoss-ts10 smooth ramp ceiling from 150 to 130 reduced @wurkoss-ts10 smooth ramp ceiling from 150 to 130 (150 was a misunderstanding, and is too high)	Selene ToyKeeper	1 year ago
483.12.118	converted old MF01S / MT18S build converted old MF01S / MT18S build	Selene ToyKeeper	1 year ago
483.12.117	smooth steps: fixed a few corner cases smooth steps: fixed a few corner cases - Off -> 1H - Off -> 2H and release - Off -> 2C - Off -> 3C or more - Ramp -> 2C (in smooth ramp mode) ... also reduced ROM size a bit. Now it does smooth animations for 2C turbo, regardless of the current ramp mode. Before, in smooth ramp mode, 2C turbo did a hard step. Hard steps were also eliminated for 1H from Off, momentary turbo from Off, regular turbo from Off, and anything longer than 2C from Off.	Selene ToyKeeper	1 year ago
483.12.116	fixed bug: globals menu missed a step when tint ramping wasn... fixed bug: globals menu missed a step when tint ramping wasn't compiled in	Selene ToyKeeper	1 year ago
483.12.115	added thefreeman-boost-fwaa build, and made aux RGB voltage ... added thefreeman-boost-fwaa build, and made aux RGB voltage work on AA/NiMH	Selene ToyKeeper	1 year ago
483.12.114	new light / driver: HDR boost driver by thefreeman new light / driver: HDR boost driver by thefreeman (works well in a FW3A host)	Selene ToyKeeper	1 year ago
483.12.113	raised default temperature limit to 50C on attiny1616 and ne... raised default temperature limit to 50C on attiny1616 and newer MCUs, slightly simplified gradual_tick()	Selene ToyKeeper	1 year ago
483.12.112	fixed builds for ff-e01, ff-pl47* fixed builds for ff-e01, ff-pl47* + added smooth steps - removed SOS mode	Selene ToyKeeper	1 year ago
483.12.111	sofirn-lt1s-pro: allow configuring the blink channel sofirn-lt1s-pro: allow configuring the blink channel emisar-d4k-3ch: removed redundant #define	Selene ToyKeeper	1 year ago
483.12.110	converted noctigon-m44 build, and greatly reduced flicker converted noctigon-m44 build, and greatly reduced flicker with a new ramp and some new hwdef algorithms	Selene ToyKeeper	1 year ago
483.12.109	fixed builds which weren't using set_level_zero() yet... fixed builds which weren't using set_level_zero() yet... - emisar-d4 - emisar-d4v2 - emisar-d4v2-nofet - emisar-d4sv2 - emisar-2ch - emisar-2ch-fet - noctigon-dm11-boost - noctigon-k1 - noctigon-kr4 - noctigon-kr4-nofet - sofirn-lt1s-pro ... and removed old build targets for d4sv2-tintramp, because it was replaced by emisar-2ch a while ago.	Selene ToyKeeper	1 year ago
483.12.108	fixed bug: smooth steps could sometimes turn off entirely fixed bug: smooth steps could sometimes turn off entirely when bottom step was too low (stepped ramp floor 1/150 or 2/150), instead of just stepping down (this also seemed to affect 1C from Off, when at stepped ramp floor) (but it didn't affect the smooth ramp)	Selene ToyKeeper	1 year ago
483.12.107	fixed soft start animation when using smooth ramp on turbo fixed soft start animation when using smooth ramp on turbo (it would jump up the last few levels before, instead of being smooth)	Selene ToyKeeper	1 year ago
483.12.106	renamed wurkkos-ts10-rgb to wurkkos-ts10-rgbaux renamed wurkkos-ts10-rgb to wurkkos-ts10-rgbaux (for consistency, and in case they ever make a full RGB version) (also, raised the post-off voltage brightness threshold, because these aux LEDs are pretty bright) (and updated the TS10 hwdef to the current API)	Selene ToyKeeper	1 year ago
483.12.105	made smooth steps look more natural (especially when turning... made smooth steps look more natural (especially when turning off) by using different curves for ramp-up and ramp-down	Selene ToyKeeper	1 year ago
483.12.104	added "smooth steps" a.k.a. "soft start", to make brightness... added "smooth steps" a.k.a. "soft start", to make brightness steps smoother (also made ramp extras config menu count its own steps)	Selene ToyKeeper	1 year ago
483.12.103	made bike strobe ontime configurable per build, made bike strobe ontime configurable per build, and made it longer on emisar-d4k-3ch because some channels don't flash fast enough	Selene ToyKeeper	1 year ago
483.12.102	updated wurkkos-ts25 to use set_level_zero() updated wurkkos-ts25 to use set_level_zero() (mostly as a quick test, will do the rest of the builds later)	Selene ToyKeeper	1 year ago
483.12.101	emisar-d4k-3ch auto-tint mode: fixed issue with LEDs turning... emisar-d4k-3ch auto-tint mode: fixed issue with LEDs turning off at moon, and changed algorithm to two simple crossfades instead of one funky and probably incorrect crossfade with an extra triangle in the middle (but it may be best to convert to sine-shaped crossfades instead of linear) (I can't really test this one very will since I don't have D4K hardware with red+warm+cool LEDs, so I'm guessing based on my unbalanced RGB model with the LEDs in the wrong order)	Selene ToyKeeper	1 year ago