~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.12.13

Rev	Summary	Authors	Date
483.12.13	reduced ROM by ~600 bytes by moving all eeprom config values... reduced ROM by ~600 bytes by moving all eeprom config values to a "cfg" struct (this also made some parts of the code cleaner)	Selene ToyKeeper	2 years ago
483.12.12	added ability to use 2 colors in config mode added ability to use 2 colors in config mode	Selene ToyKeeper	2 years ago
483.12.11	enable sunset timer in Extended Simple UI enable sunset timer in Extended Simple UI	Selene ToyKeeper	2 years ago
483.12.10	adapted smooth-sunset patch from SammysHP adapted smooth-sunset patch from SammysHP https://github.com/SammysHP/flashlight-firmware/tree/smooth-sunset https://github.com/SammysHP/flashlight-firmware/compare/anduril2...smooth-sunset (also shortened file headers, as long as I was touching those files)	Selene ToyKeeper	2 years ago
483.12.9	LT1S Pro: added manual memory with a timer by default, like ... LT1S Pro: added manual memory with a timer by default, like on SP10 Pro	Selene ToyKeeper	2 years ago
483.12.8	merged gcharts config updates for BLF Q8 t1616 merged gcharts config updates for BLF Q8 t1616	Selene ToyKeeper	2 years ago
483.12.7	added gchart's Extended Simple UI (strobes and aux config in... added gchart's Extended Simple UI (strobes and aux config in simple mode)	Selene ToyKeeper	2 years ago
483.12.6	LT1S Pro: reduced visibility of PWM by dropping the TOP valu... LT1S Pro: reduced visibility of PWM by dropping the TOP values faster (and reduced mid-ramp "stall" behavior) The red channel seems to behave a little better too, when PWM is limited to 9 kHz or so instead of 10 kHz. It really starts spazzing out at even 10.1 kHz, 1% above its spec, and behaves nicer at 9 kHz or below.	Selene ToyKeeper	2 years ago
483.12.5	LT1S: added thermal regulation LT1S: added thermal regulation ... and a bunch of gradual_tick functions ... and abstracted out some of the tint calculations ... and moved some UI settings into cfg.h	Selene ToyKeeper	2 years ago
483.12.4	LT1S Pro: after measuring, perhaps low aux mode is better af... LT1S Pro: after measuring, perhaps low aux mode is better after all	Selene ToyKeeper	2 years ago
483.12.3	LT1S Pro: added dynamic PWM (much better low modes!) LT1S Pro: added dynamic PWM (much better low modes!)	Selene ToyKeeper	2 years ago
483.12.2	refactor progress checkpoint ... got Sofirn LT1S Pro and Emi... refactor progress checkpoint ... got Sofirn LT1S Pro and Emisar D4v2 working with the new channel mode system ... but there's a lot more left to do	Selene ToyKeeper	2 years ago
483.12.1	merging gchart's changes, part 1... merging gchart's changes, part 1... + added Sofirn LT1S Pro + added Sofirn SC21 Pro + added Wurkkos TS10 + added Wurkkos TS25 * small changes to other models * improved dual voltage support + added attiny1616 flashing python script w/ pymcuprog These changes are incomplete. It does not yet include: - extended simple UI - t1616 WDT reset detection - gchart's OUTPUT_MUX code (I plan to rewrite the entire tint system)	Selene ToyKeeper	2 years ago
483.1.174	added a "tactical mode" on "Off -> 6C" added a "tactical mode" on "Off -> 6C" Tactical Mode is similar to Momentary Mode or Lockout Mode, but it has three mode slots which are independent of other config values. The default is a classic tactical setup with "high, low, strobe", each with immediate activation as soon as the button is pressed. Each slot can be a regular ramp level 1 to 150, or a strobe-group mode. To exit, press 6C or loosen/tighten the tailcap. Aux LEDs follow the same pattern as Lockout Mode. To configure, use 7H. There are 3 options, one for each slot. Enter a number 1 to 150 for a ramp mode, 0 for current strobe, or 151+ for a specific strobe mode.	Selene ToyKeeper	2 years ago
483.1.173	strobe modes: added 4C to cycle backward through strobes strobe modes: added 4C to cycle backward through strobes	Selene ToyKeeper	2 years ago
483.1.172	just whitespace / comments just whitespace / comments	Selene ToyKeeper	2 years ago
483.1.171	fast-blink the aux LED in standby when battery is low fast-blink the aux LED in standby when battery is low 3.3V and up: normal aux LED modes 2.9V to 3.3V: fast blink under 2.9V: off (only on lights with no RGB aux)	Selene ToyKeeper	2 years ago
483.1.170	fixed voltage calibration resolution on SP10 Pro fixed voltage calibration resolution on SP10 Pro and other devices which use a voltage divider (it was 0.1V per step, and is now 0.05V per step)	Selene ToyKeeper	2 years ago
483.1.169	allow supporting single-color and RGB side button in the sam... allow supporting single-color and RGB side button in the same build (new D1v2 comes in both flavors, and it's easier for everyone if they can use the same firmware) Also, removed lockout-abort bug on D1v2 (and DM11, I think). Hopefully some day I'll have time to update to a newer compiler, and then hopefully it won't have this issue any more... but for now, it still uses a kludge to trick the compiler into working.	Selene ToyKeeper	2 years ago
483.1.168	added Emisar D1v2 models (old FET+7135, new linear+FET, new ... added Emisar D1v2 models (old FET+7135, new linear+FET, new linear-only)	Selene ToyKeeper	2 years ago

Older »