~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.12.132

Rev	Summary	Authors	Date
483.12.132	converted blf-gt-mini to new API converted blf-gt-mini to new API	Selene ToyKeeper	1 year ago
483.12.131	improved blf-lt1 ramp and fixed issue with missed button pre... improved blf-lt1 ramp and fixed issue with missed button presses (it seems t85 doesn't like having timer overflow interrupts enabled in standby?)	Selene ToyKeeper	1 year ago
483.12.130	rewrote blf-lantern (blf-lt1) code to use multi-channel and ... rewrote blf-lantern (blf-lt1) code to use multi-channel and PWM+DSM, which required ... a few pretty significant changes: - no dynamic underclocking (it isn't compatible with DSM yet) - no tint ramping brightness correction (removed to save space) - removed ramp blinks (to save space, and because they're annoying) - removed momentary mode (to save space) - removed SOS mode (to save space) - removed (to save space) some other relatively recent features which weren't present in the original production firmware ... but some other things improved: + added smooth steps + extended Simple UI + added stepped tint ramping + added 13H factory reset, to save wear on threads + lower lows + smoother ramp + much higher tint ramp resolution in low modes I'm not entirely happy with this yet, so it probably needs additional work later in order to adjust the weird ramp shape (these 7135 chips have a weird response curve), add dynamic underclocking, cut down the ROM size if possible, re-add tint ramping brightness correction, etc. Multi-channel stuff in particular added a lot to the size. This is a pretty big change from the previous working build, so some users may want to stick with the last pre-multi-channel version. Non-trivial sacrifices were made to bring in more recent features.	Selene ToyKeeper	1 year ago
483.12.129	fixed emisar-d1 + emisar-d1s fixed emisar-d1 + emisar-d1s	Selene ToyKeeper	1 year ago
483.12.128	fixed bug: smooth ramp from turbo down to ceiling caused fli... fixed bug: smooth ramp from turbo down to ceiling caused flickering when smooth_steps was enabled	Selene ToyKeeper	1 year ago
483.12.127	rewrote emisar-d4k-3ch to use delta-sigma modulation (PWM + ... rewrote emisar-d4k-3ch to use delta-sigma modulation (PWM + DSM), which gives much better resolution, especially for the 8-bit channel. Also... - set_channel_mode() aborts when going from/to the same channel, to avoid unnecessary flicker - hsv2rgb() uses 16-bit R/G/B and V now - changed default channel to All - reduced default channel modes to just A, B, C, and All - smooth ramp floor defaults to 1/150 - raised level when aux LEDs turn on high during use (for better compatibility with red main LEDs)	Selene ToyKeeper	1 year ago
483.12.126	misc comments, spacing, documentation misc comments, spacing, documentation	Selene ToyKeeper	1 year ago
483.12.125	fixed RGB aux colors being off by one fixed RGB aux colors being off by one (bug introduced in r772, when adding AA/NiMH RGB voltage support)	Selene ToyKeeper	1 year ago
483.12.124	emisar-d4: added smooth steps and tactical mode, reduced ram... emisar-d4: added smooth steps and tactical mode, reduced ramp bump, removed SOS mode to make room for other stuff	Selene ToyKeeper	1 year ago
483.12.123	converted mateminco-mf01-mini build to new API converted mateminco-mf01-mini build to new API	Selene ToyKeeper	1 year ago
483.12.122	fix failed builds without USE_RAMP_AFTER_MOON_CONFIG fix failed builds without USE_RAMP_AFTER_MOON_CONFIG	Selene ToyKeeper	1 year ago
483.12.121	converted FW3A to new API converted FW3A to new API (my FW3A dev host is dead though, so the DD FET channel isn't 100% confirmed to work ... will have to solder together a new dev host at some point)	Selene ToyKeeper	1 year ago
483.12.120	converted sofirn-sp10-pro to new API converted sofirn-sp10-pro to new API	Selene ToyKeeper	1 year ago
483.12.119	reduced @wurkoss-ts10 smooth ramp ceiling from 150 to 130 reduced @wurkoss-ts10 smooth ramp ceiling from 150 to 130 (150 was a misunderstanding, and is too high)	Selene ToyKeeper	1 year ago
483.12.118	converted old MF01S / MT18S build converted old MF01S / MT18S build	Selene ToyKeeper	1 year ago
483.12.117	smooth steps: fixed a few corner cases smooth steps: fixed a few corner cases - Off -> 1H - Off -> 2H and release - Off -> 2C - Off -> 3C or more - Ramp -> 2C (in smooth ramp mode) ... also reduced ROM size a bit. Now it does smooth animations for 2C turbo, regardless of the current ramp mode. Before, in smooth ramp mode, 2C turbo did a hard step. Hard steps were also eliminated for 1H from Off, momentary turbo from Off, regular turbo from Off, and anything longer than 2C from Off.	Selene ToyKeeper	1 year ago
483.12.116	fixed bug: globals menu missed a step when tint ramping wasn... fixed bug: globals menu missed a step when tint ramping wasn't compiled in	Selene ToyKeeper	1 year ago
483.12.115	added thefreeman-boost-fwaa build, and made aux RGB voltage ... added thefreeman-boost-fwaa build, and made aux RGB voltage work on AA/NiMH	Selene ToyKeeper	1 year ago
483.12.114	new light / driver: HDR boost driver by thefreeman new light / driver: HDR boost driver by thefreeman (works well in a FW3A host)	Selene ToyKeeper	1 year ago
483.12.113	raised default temperature limit to 50C on attiny1616 and ne... raised default temperature limit to 50C on attiny1616 and newer MCUs, slightly simplified gradual_tick()	Selene ToyKeeper	1 year ago

Older »