~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.12.86

Rev	Summary	Authors	Date
483.12.86	converted noctigon-dm11-* builds to multi-channel converted noctigon-dm11-* builds to multi-channel (but I could only test dm11-boost on actual hardware) (also, it looks like dm11-sbt90 is almost identical to the base kr4 build, so I removed its hwdef)	Selene ToyKeeper	1 year ago
483.12.85	converted noctigon-k1 to multi-channel converted noctigon-k1 to multi-channel	Selene ToyKeeper	1 year ago
483.12.84	fixed default channel mode after using factory reset with co... fixed default channel mode after using factory reset with colors	Selene ToyKeeper	1 year ago
483.12.83	forgot this file in previous commit forgot this file in previous commit	Selene ToyKeeper	1 year ago
483.12.82	converted emisar-d4v2-nofet to multi-channel, and converted emisar-d4v2-nofet to multi-channel, and gave it a new ramp with dynamic PWM	Selene ToyKeeper	1 year ago
483.12.81	kludgy attempt to factor PWM rise/fall time into level_calc.... kludgy attempt to factor PWM rise/fall time into level_calc.py (to reduce the ramp bumps at halfspeed / quarterspeed levels)	Selene ToyKeeper	1 year ago
483.12.80	fixed ff-e01, ff-pl47, ff-pl47g2 (using new refactor) fixed ff-e01, ff-pl47, ff-pl47g2 (using new refactor)	Selene ToyKeeper	1 year ago
483.12.79	fixed original D4S (using new refactor) fixed original D4S (using new refactor)	Selene ToyKeeper	1 year ago
483.12.78	fixed D4Sv2 (using new refactor) fixed D4Sv2 (using new refactor)	Selene ToyKeeper	1 year ago
483.12.77	converted Emisar D4 and BLF Q8 to multi-channel, converted Emisar D4 and BLF Q8 to multi-channel, and enabled previously-removed tactical mode on the Q8 since there seems to be enough space now (also lowercased their hwdef files)	Selene ToyKeeper	1 year ago
483.12.76	lowercase'd sofirn-lt1s-pro files lowercase'd sofirn-lt1s-pro files	Selene ToyKeeper	1 year ago
483.12.75	fixed LT1S Pro (using new refactor) fixed LT1S Pro (using new refactor)	Selene ToyKeeper	1 year ago
483.12.74	@wurkkos-: raised default temperature limit from 45 C to 50... @wurkkos-: raised default temperature limit from 45 C to 50 C, moved some common options to a shared config file	Selene ToyKeeper	1 year ago
483.12.73	fixed Wurkkos builds (using new refactor) fixed Wurkkos builds (using new refactor)	Selene ToyKeeper	1 year ago
483.12.72	fixed d4v2, kr4, m44, emisar-2ch (using new refactor), fixed d4v2, kr4, m44, emisar-2ch (using new refactor), added RGB aux channel modes to models which didn't have it	Selene ToyKeeper	1 year ago
483.12.71	refactored how channel modes are defined, and converted emis... refactored how channel modes are defined, and converted emisar-2ch build	Selene ToyKeeper	1 year ago
483.12.70	Partially fixed oscillating aux LED voltage colors while asl... Partially fixed oscillating aux LED voltage colors while asleep. Amplitude is smaller, frequency is slower, but it can still happen sometimes at color boundaries on models with bright aux LEDs on high mode. (because that's not a measurement error, it's actually oscillating voltage) The Wurkkos TS11 in particular tends to bounce when crossing certain color boundaries, because the aux LEDs are bright and change the voltage enough to push it back and forth across the boundary. Also sped up voltage measurement during first few seconds after turning off, to compensate for slowdown caused by the lowpass filter... while slowing down measurements afterward to slow the oscillation. I tried a bunch of different methods, spanning a range of "stable but slow" to "fast but unstable", and kept code clauses for three representative methods. The one enabled by default is the best compromise I found to reduce the issue as much as possible while keeping readings reasonably responsive.	Selene ToyKeeper	1 year ago
483.12.69	Fixed spurious voltage warnings in attiny1616 sleep mode. F... Fixed spurious voltage warnings in attiny1616 sleep mode. Fixed by SammysHP. https://budgetlightforum.com/t/anduril-2-feature-change-suggestions/218045/467 I was never able to reproduce the issue here, but the fix seems good and others tested it successfully.	Selene ToyKeeper	1 year ago
483.12.68	added Noctigon M44 sources added Noctigon M44 sources (oops, forgot to do this earlier) (files are dated 2023-05-30)	Selene ToyKeeper	1 year ago
483.12.67	fixed KR4 thermal regulation fixed KR4 thermal regulation (r714 on 2023-05-30 removed one line too many, and the value defaulted to MAX_1x7135, which was way too high) https://budgetlightforum.com/t/emisar-d4k-no-stepdown-with-anduril-2023-05-30-noctigon-kr4-hex/218956	Selene ToyKeeper	1 year ago

Older »