1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
|
// thefreeman's BCK-FWAA-MP3432 (li-ion / AA)
// Copyright (C) 2023 TBD (thefreeman), Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
#define MODEL_NUMBER "1632"
#include "hwdef-thefreeman-boost-fwaa-mp3432-hdr-dac-rgb.h"
// ATTINY: 1616
// HPRsense : 4.2+0.3+20 = 24.5mR (DMN1004UFDF+trace resistance+20mR)
// R1=165k Vsense=49.02 Iout=2001mA
// LPRsense : 2R
// transition DAC lvl 14, ramp lvl 51
// fifth power ramp 0.06mA to 2001mA
#define RAMP_SIZE 150
// 4 ramp segments:
// - low 0.55V
// - low 2.5V
// - high 0.55V
// - high 2.5V
// PWM1: DAC Data
#define PWM1_LEVELS 2, 3, 4, 5, 6, 8, 9, 11, 14, 16, 19, 23, 26, 31, 35, 41, 47, 54, 61, 69, 78, 89,100,112,125,140,155,173,191,212,234, \
56, 62, 68, 74, 82, 89, 97,106,115,125,136,147,159,172,186,200,215,232,249, \
14, 15, 17, 18, 19, 20, 22, 23, 25, 26, 28, 30, 32, 34, 36, 38, 40, 43, 45, 48, 51, 54, 57, 60, 63, 66, 70, 74, 77, 81, 86, 90, 95, 99,104,109,114,120,126,131,138,144,150,157,164,171,179,187,195,203,212,221,230,239,249, \
57, 59, 61, 64, 66, 69, 72, 74, 77, 80, 83, 86, 90, 93, 96,100,103,107,111,115,119,123,127,132,136,141,145,150,155,160,166,171,176,182,188,194,200,206,213,219,226,233,240,247,255
// PWM Tops: VREF selector (0.55V=16,1.1V=17, 2.5V=18, 4.3V=19, 1.5V=20)
#define PWM_TOPS 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \
18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, \
16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, 16, \
18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18, 18
#define MAX_1x7135 50
#define DEFAULT_LEVEL 44
#define HDR_ENABLE_LEVEL_MIN 51 // when HDR FET turns ON
// no PWM, so MCU clock speed can be slow
#define HALFSPEED_LEVEL 46
#define QUARTERSPEED_LEVEL 45 // seems to run fine at 10kHz/4, try reducing more
#define RAMP_SMOOTH_FLOOR 1
#define RAMP_SMOOTH_CEIL 130 // ~50% power, ~??? mA / ??? lm
#define RAMP_DISCRETE_FLOOR 1
#define RAMP_DISCRETE_CEIL 130
#define RAMP_DISCRETE_STEPS 7
// 20 [45] 70 95 120
#define SIMPLE_UI_FLOOR 20
#define SIMPLE_UI_CEIL 120 // ~37% power, ~??? mA / ??? lm
#define SIMPLE_UI_STEPS 5
// don't blink mid-ramp
#ifdef BLINK_AT_RAMP_MIDDLE
#undef BLINK_AT_RAMP_MIDDLE
#endif
// thermal config
// temperature limit
#define THERM_FASTER_LEVEL 130
#define MIN_THERM_STEPDOWN MAX_1x7135
//#define THERM_LOOKAHEAD 2 // 4 by default -> decrease for longer turbo
//#define THERM_NEXT_WARNING_THRESHOLD 48 // 24 by default -> increase for fewer adjustments (more stable output on large time scale)
//#define THERM_RESPONSE_MAGNITUDE 16 // 64 by default -> decrease for smaller adjustments (removes dip post turbo)
//#define THERM_WINDOW_SIZE 1 // 2 by default -> decrease for tighter temperature regulation
// UI
//#define SIMPLE_UI_ACTIVE 0 // advanced UI by default
// allow Aux Config and Strobe Modes in Simple UI
#define USE_EXTENDED_SIMPLE_UI
// Allow 3C in Simple UI for switching between smooth and stepped ramping
#define USE_SIMPLE_UI_RAMPING_TOGGLE
#define DEFAULT_2C_STYLE 1 // enable 2 click turbo
// AUX
// this light has three aux LED channels: R, G, B
#define USE_AUX_RGB_LEDS
// show each channel while it scroll by in the menu
#define USE_CONFIG_COLORS
// blink numbers on the main LEDs by default
#define DEFAULT_BLINK_CHANNEL CM_MAIN
// use aux red + aux blue for police strobe
#define USE_POLICE_COLOR_STROBE_MODE
#define POLICE_STROBE_USES_AUX
#define POLICE_COLOR_STROBE_CH1 CM_AUXRED
#define POLICE_COLOR_STROBE_CH2 CM_AUXBLU
// the aux LEDs are front-facing, so turn them off while main LEDs are on
#ifdef USE_INDICATOR_LED_WHILE_RAMPING
#undef USE_INDICATOR_LED_WHILE_RAMPING
#endif
// Misc
#define PARTY_STROBE_ONTIME 1 // slow down party strobe
#define STROBE_OFF_LEVEL 1 // keep the regulator chip on between pulses
// smoother candle mode with bigger oscillations
#define CANDLE_AMPLITUDE 40
// enable 13H factory reset so it can be used on tail e-switch lights
#define USE_SOFT_FACTORY_RESET
|