1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
// Fireflies ROT66 (14x7135) config options for Anduril
#include "hwdef-FF_ROT66.h"
// the button lights up
#define USE_INDICATOR_LED
// the button is visible while main LEDs are on
#define USE_INDICATOR_LED_WHILE_RAMPING
// enable blinking indicator LED while off?
//#define TICK_DURING_STANDBY
// If TICK_DURING_STANDBY is enabled...
// off mode: high (2)
// lockout: blinking (3)
//#define INDICATOR_LED_DEFAULT_MODE ((3<<2) + 2)
// ... or if TICK_DURING_STANDBY is turned off:
// off mode: high (2)
// lockout: off (0)
#define INDICATOR_LED_DEFAULT_MODE ((0<<2) + 2)
// driver is a FET+N+1,
// where N=6 for the 219b version,
// or N=13 for the XP-L HI version (this version)
// calculated to get transition points at level 65 and 125
#define RAMP_LENGTH 150
// first 65 steps copied from FW3A
#define PWM1_LEVELS 1,1,2,2,3,3,4,4,5,6,7,8,9,10,12,13,14,15,17,19,20,22,24,26,29,31,34,36,39,42,45,48,51,55,59,62,66,70,75,79,84,89,93,99,104,110,115,121,127,134,140,147,154,161,168,176,184,192,200,209,217,226,236,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
// remaining steps from this command:
// level_calc.py ninth 3 150 7135 1 1.4 110.1 7135 15 1 1644.16 FET 1 10 4500
#define PWM2_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,16,17,18,19,20,21,22,23,25,26,27,29,30,32,34,35,37,39,41,43,46,48,50,53,55,58,61,64,67,70,73,77,81,84,88,92,97,101,106,110,115,120,126,131,137,143,149,156,162,169,177,184,192,200,208,217,226,235,245,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,0
#define PWM3_LEVELS 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,7,13,21,28,35,43,51,60,68,77,87,96,106,117,127,138,150,161,173,186,199,212,226,240,255
#define MAX_1x7135 65
#define MAX_Nx7135 125
#define HALFSPEED_LEVEL 14
#define QUARTERSPEED_LEVEL 8
// regulate down faster when the FET is active, slower otherwise
#define THERM_FASTER_LEVEL 130 // throttle back faster when high
// don't do this
#undef BLINK_AT_RAMP_MIDDLE
#undef BLINK_AT_RAMP_CEILING
|