1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
// Noctigon KR4 (no DD FET) config options for Anduril
// Copyright (C) 2020-2023 Selene ToyKeeper
// SPDX-License-Identifier: GPL-3.0-or-later
#pragma once
// (and Noctigon KR1)
// (and Emisar D4v2 E21A, a.k.a. "D4v2.5")
#define HWDEF_C_FILE hwdef-noctigon-kr4-nofet.c
#include "cfg-noctigon-kr4.h"
#undef MODEL_NUMBER
#define MODEL_NUMBER "0212"
// ATTINY: 1634
// brightness w/ SST-20 4000K LEDs:
// 0/1023: 0.35 lm
// 1/1023: 2.56 lm
// max regulated: 1740 lm
#undef PWM_CHANNELS
#define PWM_CHANNELS 1
#define RAMP_SIZE 150
// prioritize low lows, at risk of visible ripple
// level_calc.py 5.01 1 149 7135 1 0.3 1740 --pwm dyn:78:16384:255
#undef PWM1_LEVELS
#define PWM1_LEVELS 0,1,1,1,2,3,3,4,5,6,7,8,9,10,11,13,14,16,17,19,21,23,25,27,29,31,34,36,39,42,44,47,50,53,57,60,63,67,70,74,77,81,85,88,92,96,99,103,107,110,113,117,120,123,126,128,130,133,134,136,137,137,137,137,136,135,133,130,126,122,117,111,104,96,87,76,65,52,38,22,23,25,26,27,28,29,30,32,33,34,36,37,39,40,42,43,45,47,49,51,53,55,57,59,61,63,66,68,70,73,76,78,81,84,87,90,93,96,99,103,106,110,113,117,121,125,129,133,137,142,146,151,155,160,165,170,175,181,186,192,197,203,209,215,222,228,234,241,248,255
#undef PWM2_LEVELS
#undef PWM_TOPS
#define PWM_TOPS 16383,16383,12404,8140,11462,14700,11041,12947,13795,14111,14124,13946,13641,13248,12791,13418,12808,13057,12385,12428,12358,12209,12000,11746,11459,11147,11158,10793,10708,10576,10173,9998,9800,9585,9527,9278,9023,8901,8634,8486,8216,8053,7881,7615,7440,7261,7009,6832,6656,6422,6196,6031,5819,5615,5419,5190,4973,4803,4571,4386,4179,3955,3745,3549,3340,3145,2940,2729,2513,2312,2109,1903,1697,1491,1286,1070,871,662,459,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255
#undef DEFAULT_LEVEL
#define DEFAULT_LEVEL 50
#undef MAX_1x7135
#define MAX_1x7135 150
#undef RAMP_SMOOTH_FLOOR
#undef RAMP_SMOOTH_CEIL
#undef RAMP_DISCRETE_FLOOR
#undef RAMP_DISCRETE_CEIL
#undef RAMP_DISCRETE_STEPS
#define RAMP_SMOOTH_FLOOR 11 // low levels may be unreliable
#define RAMP_SMOOTH_CEIL 130
// 11, 30, [50], 70, 90, 110, 130 (plus [150] on turbo)
#define RAMP_DISCRETE_FLOOR 11
#define RAMP_DISCRETE_CEIL RAMP_SMOOTH_CEIL
#define RAMP_DISCRETE_STEPS 7
// safe limit ~1000 lm (can sustain 900 lm)
#undef SIMPLE_UI_FLOOR
#undef SIMPLE_UI_CEIL
#define SIMPLE_UI_FLOOR RAMP_DISCRETE_FLOOR
#define SIMPLE_UI_CEIL RAMP_DISCRETE_CEIL
// slow down party strobe; this driver can't pulse for 1ms or less
// (only needed on no-FET build)
#define PARTY_STROBE_ONTIME 2
// jump start a bit higher than base driver
#undef DEFAULT_JUMP_START_LEVEL
#define DEFAULT_JUMP_START_LEVEL 25
// stop panicking at ~1300 lm
#undef THERM_FASTER_LEVEL
#define THERM_FASTER_LEVEL 140
#undef MIN_THERM_STEPDOWN
#define MIN_THERM_STEPDOWN 80 // must be > end of dynamic PWM range
|