~tristan-brindle/oggconvert/trunk : changes

~tristan-brindle/oggconvert/trunk » Changes from revision 25

From Revision 18

Rev	Summary	Authors	Date
18	Just some minor things: Just some minor things: * Show a message in the progress bar for the first three seconds rather than being blank * Reword the "authors" bit of the about dialogue so that the wrong people don't get e-mailed about OggConvert :) * We've got a lovely SVG logo, so let's show it off in the about dialogue * The transcoder now accepts any URI for output, as it does for input. This means that in theory it can save to remove locations. As with input, this mostly works, but is slightly confused by the fact that the GTK file selector uses GIO, but GStreamer uses Gnome-VFS (at least on my system). Hopefully future GStreamer versions will bump the rank of GIO so that gets used instead.	Tristan Brindle	15 years ago
17	Merge latest translations from Launchpad. Added ca, frp, he,... Merge latest translations from Launchpad. Added ca, frp, he, hu, lt, mt, nb, sk, sr, tr, zh_TW. (We now have an impressive 30 languages, including English.)	Tristan Brindle	15 years ago
16	* Use time() rather than clock() for working out elapsed enc... * Use time() rather than clock() for working out elapsed encoding time, which should sort out time remaining being way off on AMD64. Hopefully closes bug #250174. * Add a version check on the Schroedinger encoder at startup, we require 1.0.0 or newer. This means we can... * Remove the warning about Dirac encoding being experimental, since it's not any more. * The quality sliders now go down to zero. As a side-effect, this means that OggConvert's quality settings should correspond to those of ffmpeg2theora (for video, at least). * Use "perceptual weighting" by default in the Dirac encoder, as recommended by the Schro author. This results in dramatically smaller output files at the same noise threshold (and slightly faster encoding times), at the expense of a slight loss of picture quality. I think it's worth it. * Really don't update the progressbar in the first three seconds of transcoding (it wasn't quite right before) * Ask the transcoder for the stream duration every time we update the progressbar. This should fix the problem of files reporting that they're "120% completed" for example (this often happened when transcoding from MPEG).	Tristan Brindle	15 years ago
15	* Added a check for Matroska at startup to remove an uninten... * Added a check for Matroska at startup to remove an unintended dependency on gst-plugins-good * Fix an occasional type error on file completion (actually, this was in the last revision but I forgot to note it there) * Include the latest translations from Launchpad: added cs, fi, ms, oc, pt, uk, zh_CN * Update Changelog and Readme Barring any unforeseen problems, this is 0.3.1	Tristan Brindle	16 years ago
14	* Added Schro quality setting (thanks to David Schleef). Clo... * Added Schro quality setting (thanks to David Schleef). Closes #180228 * Use urllib to unescape the URIs that gtk.FileChooser gives us. Closes #182607 * As new versions of gst-plugins-base and gst-ffmpeg (take your pic) offer reasonable support for the FLV container, add "application/x-flash-video" as a special case under Video and All Files in the file selector. Closes #155023 * Don't actually init anything in __init__.py, because apparently that breaks stuff (!). Added a new file ocv_init.py instead. Closes #175770 * Minor cleanup in ocv_transcoder.py	Tristan Brindle	16 years ago
13	Gah. Reverse the change setting the default width. GTK sucks... Gah. Reverse the change setting the default width. GTK sucks. Okay. THIS is 0.3.0. Promise.	Tristan Brindle	16 years ago
12	Updated changelog, readme, and todo files for release. Updat... Updated changelog, readme, and todo files for release. Updated to latest Launchpad translations, added Dutch. Set the minimum window width (back) to 360px, because I think it looks better this way. Don't display time remaining for the first three seconds, as we get crazy numbers during this time (as GStreamer often likes to report a negative stream position which messes things up). And that's it: this is 0.3.0.	Tristan Brindle	16 years ago
11	Various housekeeping changes to get ready for release. Lots ... Various housekeeping changes to get ready for release. Lots of files moved around, and a few extra ones brought into bzr. Imported translations from Launchpad. This is a release candidate for 0.3.0.	Tristan Brindle	16 years ago
10	Added support for converting from non-local sources such as ... Added support for converting from non-local sources such as SSH or HTTP if Gnome-VFS is supported by GTK and GStreamer (but pygnomevfs is not required, or indeed used).	Tristan Brindle	16 years ago
9	New media checker working, quite nicely I think. Slightly fa... New media checker working, quite nicely I think. Slightly faster than the old discoverer, and hopefully with fewer problems with e.g. flv files. The transcoder is now connected to the GUI the "proper" way, i.e. using gobject callbacks. The way the timing is done is now much more accurate. Shame the method of predicting time remaining (assuming completely linear encoding progress) still sucks, but there we go. Removed the "stall warning" dialogue, since (a) it was really badly worded, (b) all the translators had a hard time with it, and (c) 99% of the time it was a false alarm anyway. Nearly ready for a 0.3.0 release I think...	Tristan Brindle	16 years ago
8	Lots of little changes to bring OggConvert mostly inline wit... Lots of little changes to bring OggConvert mostly inline with OggConvert++ (except for the new media checker) Changes: * ocv_gtk.py split into ocv_main.py and ocv_in_progress.py * ocv_gst.py split into ocv_transcoder.py and ocv_media_checker.py * Lots of tidying up of messy functions in ocv_main * The media checker is now callback-based. It still blocks the UI, but at least it doesn't look like it blocks the UI any more ;-). It's still using the discoverer at the moment, but that will change * Brought A. Bram Neijt's OggConvert icon into the source tree and use it as the main icon for the app. * The URL in the About dialogue is now clickable, opening a new browser tab. I know how important this is. * Minor change to the way the time remaining is displayed. * Audio options are greyed-out when a video-only file is selected, and vice-versa. * Use the extension ".ogv" for Ogg video files (both Theora and Dirac), in accordance with the new Xiph.org guidelines. Fixes bug #160054. Still to do: * Port the OggConvert++ media checker to Python * Get the transcoder to send out "paused" and "playing" signals which the GUI can listen for. * Investigate whether we can support Gnome-VFS for input/output without depending on it (which I don't want to do) * Bring in all the translations for Launchpad. * Release 0.3.0 * Party like it's 1999.	Tristan Brindle	16 years ago
7	Post-merge commit. Matroska and translation support added Post-merge commit. Matroska and translation support added	Tristan Brindle	16 years ago
6	Pre-merge commit Pre-merge commit	Tristan Brindle	16 years ago
5	Commit various small fixes that have collected on my machine... Commit various small fixes that have collected on my machine over the past few months. More importantly, adds the first steps towards internationalisation (gettext) support.	Tristan Brindle	16 years ago
4	Right, last couple of bugs squashed, this is 0.2.0 Right, last couple of bugs squashed, this is 0.2.0	Tristan Brindle	17 years ago
3	Added a lovely "About" dialogue, and made sure that you can'... Added a lovely "About" dialogue, and made sure that you can't read and write to the same file. 0.2 is about done, I reckon.	Tristan Brindle	17 years ago
2	Many, many changes. A short summary: Many, many changes. A short summary: * New setup.py file to create source and RPM releases * Support for Dirac! Wooo! * OggConvert now actually quits when you close it with the window manager * OggConvert no longer crashes horribly when used with pitfdll * A nice .desktop file so you can launch OggConvert from the menu * We now check to see whether the encoder has stalled, and warn the user * Many other small bugfixes	Tristan Brindle	17 years ago
1	Initial commit Initial commit	Tristan Brindle	17 years ago