1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
CDRTOOLS compiles without changes on any SCO OpenServer 5.0.4
or later installation having the SCO DevSys or GCC-2.95 and
smake-1.2a04 or later installed.
You can get pre-packaged, custom installable binaries from:
http://www.sco.com/skunkware/cdrtools
Some general notes on CDRTOOLS are available from:
http://www.sco.com/skunkware/cdrtools/SCO-NOTES.html
Limitations for CDRTOOLS-1.8 on SCO OpenServer 5:
1) SCO OpenServer 5.0.0 and 5.0.2 are unsupported!
2) There is only support for SCSI devices
3) There no support for AHA 154X scsi controllers
===================================================================
NOTE: cdrecord now supports the -scanbus option. Therefore the
old addressing methods are NO LONGER AVAILABLE !!!
===================================================================
As there is no real generic SCSI driver, cdrecord uses the pass through
ioctl of the cdrom target driver (Srom).
The correct dev= syntax on SCO Openserver 5 is:
dev=scsibus,target,lun (and scsibus is scsibus now!!!)
A sample output from cdrecord -scanbus looks like:
#cdrecord -scanbus
Cdrecord 1.8 (i686-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 Jörg Schilling
Using libscg version 'schily-0.1'
scsibus0:
0,0,0 0) 'SEAGATE ' 'ST34573LC ' '5960' Disk
0,1,0 1) 'SEAGATE ' 'ST34573LC ' '5960' Disk
0,2,0 2) 'SEAGATE ' 'ST34573LC ' '5960' Disk
0,3,0 3) *
0,4,0 4) *
0,5,0 5) 'PIONEER ' 'CD-ROM DR-U06S ' '1.05' Removable CD-ROM
0,6,0 6) 'TEAC ' 'CD-R56S ' '1.0E' Removable CD-ROM
0,7,0 7) *
The first column showing the triple x,y,z tells you the address to use.
As you can see the TEAC CD-R56S CD-Writer does have the following address:
dev=0,6,0
===================================================================
THE OLD ADDRESSING IS NO LONGER AVAILABLE!
PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
===================================================================
Running cdrecord with the old address method will result in an error!
#cdrecord dev=/dev/rcd1:6,0 -inq
Cdrecord 1.8 (i386-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 Jörg Schilling
scsidev: '/dev/rcd1:6,0'
devname: '/dev/rcd1'
scsibus: 0 target: 6 lun: 0
cdrecord: Invalid argument. Open by 'devname' no longer supported on this OS. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
MAKE SURE YOU HAVE MEDIA IN YOUR CD-ROM DEVICES, SO THAT CDRECORD CAN
OPEN THE DEVICE FOR PASS-THROUGH ACCESS!
To compile cdrtools, you need 'smake' version 1.2a04 or later from:
ftp://ftp.sco.com/skunkware/osr5/vols
Please make sure you use smake-1.2a04 or later, cause smake-1.2 versions
before a04 will coredump on the compilation of cdrtools on OpenServer.
|