1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
|
The current *BSD port will not yet be able to scan the SCSI bus
for a CD-Recorder as it is on other architectures.
User level SCSI seems not be be well tested on *BSD
It would be nice if the kernel hackers of all *BSD flavors could agree in
adding decent and useful SCSI user land transport support.
This would cause the following changes:
- Add a driver that is present by default and offeres an
easy to address interface to the /dev/ namespace.
- Create device file entries for this driver by default.
- allow to send all commands on this driver even if the main
driver entry is in use, At least allow:
INQUIRY
TEST_UNIT_READY
REQUEST_SENSE
to be able to scan the SCSI bus for drives.
NOTE: This changed with FreeBSD/cam cdrecord -scanbus works on FreeBSD/cam
Workaround:
If /dev/su0-0-0 ... does not exist on your system, you may try
to create the devices with the MAKEDEV.su script below.
If /dev/su0-0-0 ... do not work on your system, you may try
use dev=/dev/rcd0a:@,0 od dev=/dev/rcd0a:@
If the CD-Recorder is on /dev/cd0a
Read the man page for more information.
There is no way to get the device node entry from the numerical target
specification on *BSD. You must specify the appropriate device node name:
e.g. dev=/dev/cd0.ctl:6,0 together with the numerical target specification.
A short form is:
dev=/dev/cd0.ctl:@
But this syntax may not work on all *BSD flavours as not all *BSD flavours
support mapping back the target/lun numbers from a device.
In any case: read the cdrecord man page and try to find the /dev/* entry for
your CD-recorder that allows to be used with ioctl's.
On FreeBSD/cam, you will be able to access the CD-Recorder as on other
systems. If your CD-Recorder is on SCSI Bus 0, Target 2, lun 0
type:
cdrecord dev=0,2,0 .....
Jörg
------------------------- MAKEDEV.su------------------
#!/bin/sh
#
# You must check which minor base is really needed for your system
# The su driver seems not to be well tested on *BSD
#
# If nothing else helps, create a link /dev/scgx to the right
# /dev/ entry (an entry that responds right with /sbin/scsi)
# for your needed device.
#
minorbase="536870912 + 2"
#minorbase="0"
#minorbase="0 + 2"
#minorbase="0 + 3"
mknod /dev/su0-0-0 c 18 `expr $minorbase + 0 '*' 8`
mknod /dev/su0-1-0 c 18 `expr $minorbase + 1 '*' 8`
mknod /dev/su0-2-0 c 18 `expr $minorbase + 2 '*' 8`
mknod /dev/su0-3-0 c 18 `expr $minorbase + 3 '*' 8`
mknod /dev/su0-4-0 c 18 `expr $minorbase + 4 '*' 8`
mknod /dev/su0-5-0 c 18 `expr $minorbase + 5 '*' 8`
mknod /dev/su0-6-0 c 18 `expr $minorbase + 6 '*' 8`
mknod /dev/su0-7-0 c 18 `expr $minorbase + 7 '*' 8`
mknod /dev/su1-0-0 c 18 `expr $minorbase + 1 '*' 64 + 0 '*' 8`
mknod /dev/su1-1-0 c 18 `expr $minorbase + 1 '*' 64 + 1 '*' 8`
mknod /dev/su1-2-0 c 18 `expr $minorbase + 1 '*' 64 + 2 '*' 8`
mknod /dev/su1-3-0 c 18 `expr $minorbase + 1 '*' 64 + 3 '*' 8`
mknod /dev/su1-4-0 c 18 `expr $minorbase + 1 '*' 64 + 4 '*' 8`
mknod /dev/su1-5-0 c 18 `expr $minorbase + 1 '*' 64 + 5 '*' 8`
mknod /dev/su1-6-0 c 18 `expr $minorbase + 1 '*' 64 + 6 '*' 8`
mknod /dev/su1-7-0 c 18 `expr $minorbase + 1 '*' 64 + 7 '*' 8`
|