~ubuntu-branches/ubuntu/hardy/gnupg/hardy-updates

This is gnupg1.info, produced by makeinfo version 4.8 from gnupg1.texi.

   This is the `The GNU Privacy Guard Manual' (1.4.6, 4 December 2006).

   Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2005, 2006 Free
Software Foundation, Inc.

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU General Public License as
     published by the Free Software Foundation; either version 2 of the
     License, or (at your option) any later version. The text of the
     license can be found in the section entitled "Copying".

INFO-DIR-SECTION GNU Utilities
START-INFO-DIR-ENTRY
* gpg: (gpg).            OpenPGP encryption and signing tool (v1).
END-INFO-DIR-ENTRY


File: gnupg1.info,  Node: Top,  Next: Invoking GPG,  Up: (dir)

Using the GnuPG Version 1.4
***************************

This is the `The GNU Privacy Guard Manual' (1.4.6, 4 December 2006).

   Copyright (C) 1998, 1999, 2000, 2001, 2002, 2004, 2005, 2006 Free
Software Foundation, Inc.

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU General Public License as
     published by the Free Software Foundation; either version 2 of the
     License, or (at your option) any later version. The text of the
     license can be found in the section entitled "Copying".

This manual documents how to use the standalone version of GNU Privacy
Guard.

* Menu:

* Invoking GPG::        Using the classic GPG protocol.
* Specify a User ID::   How to Specify a User Id.

* Copying::             GNU General Public License says
                        how you can copy and share GnuPG
* Option Index::        Index to command line options.
* Index::	        Index of concepts and symbol names.


File: gnupg1.info,  Node: Invoking GPG,  Next: Specify a User ID,  Prev: Top,  Up: Top

1 Invoking GPG
**************

`gpg' is the OpenPGP part of the GNU Privacy Guard (GnuPG). It is a
tool to provide digital encryption and signing services using the
OpenPGP standard. `gpg' features complete key management and all bells
and whistles you can expect from a decent OpenPGP implementation.

   This is the standalone version of `gpg'.  For desktop use you should
consider using `gpg2'.

   *Note Option Index::, for an index to `gpg''s commands and options.

* Menu:

* GPG Commands::        List of all commands.
* GPG Options::         List of all options.
* GPG Configuration::   Configuration files.
* GPG Examples::        Some usage examples.

Developer information:


File: gnupg1.info,  Node: GPG Commands,  Next: GPG Options,  Up: Invoking GPG

1.1 Commands
============

Commands are not distinguished from options execpt for the fact that
only one command is allowed.

   `gpg' may be run with no commands, in which case it will perform a
reasonable action depending on the type of file it is given as input
(an encrypted message is decrypted, a signature is verified, a file
containing keys is listed).

   Please remember that option as well as command parsing stops as soon
as a non-option is encountered, you can explicitly stop parsing by
using the special option `--'.

* Menu:

* General GPG Commands::        Commands not specific to the functionality.
* Operational GPG Commands::    Commands to select the type of operation.
* OpenPGP Key Management::      How to manage your keys.


File: gnupg1.info,  Node: General GPG Commands,  Next: Operational GPG Commands,  Up: GPG Commands

1.1.1 Commands not specific to the function
-------------------------------------------

`--version'
     Print the program version and licensing information.  Note that you
     cannot abbreviate this command.

`--help'
`-h'
     Print a usage message summarizing the most useful command line
     options.  Not that you cannot abbreviate this command.

`--warranty'
     Print warranty information.

`--dump-options'
     Print a list of all available options and commands.  Note that you
     cannot abbreviate this command.


File: gnupg1.info,  Node: Operational GPG Commands,  Next: OpenPGP Key Management,  Prev: General GPG Commands,  Up: GPG Commands

1.1.2 Commands to select the type of operation
----------------------------------------------

`--sign'
`-s'
     Make a signature. This command may be combined with `--encrypt'
     (for a signed and encrypted message), `--symmetric' (for a signed
     and symmetrically encrypted message), or `--encrypt' and
     `--symmetric' together (for a signed message that may be decrypted
     via a secret key or a passphrase).

`--clearsign'
     Make a clear text signature. The content in a clear text signature
     is readable without any special software. OpenPGP software is only
     needed to verify the signature. Clear text signatures may modify
     end-of-line whitespace for platform independence and are not
     intended to be reversible.

`--detach-sign'
`-b'
     Make a detached signature.

`--encrypt'
`-e'
     Encrypt data. This option may be combined with `--sign' (for a
     signed and encrypted message), `--symmetric' (for a message that
     may be decrypted via a secret key or a passphrase), or `--sign'
     and `--symmetric' together (for a signed message that may be
     decrypted via a secret key or a passphrase).

`--symmetric'
`-c'
     Encrypt with a symmetric cipher using a passphrase. The default
     symmetric cipher used is CAST5, but may be chosen with the
     `--cipher-algo' option. This option may be combined with `--sign'
     (for a signed and symmetrically encrypted message), `--encrypt'
     (for a message that may be decrypted via a secret key or a
     passphrase), or `--sign' and `--encrypt' together (for a signed
     message that may be decrypted via a secret key or a passphrase).

`--store'
     Store only (make a simple RFC1991 literal data packet).

`--decrypt'
`-d'
     Decrypt the file given on the command line (or `stdin' if no file
     is specified) and write it to stdout (or the file specified with
     `--output'). If the decrypted file is signed, the signature is also
     verified. This command differs from the default operation, as it
     never writes to the filename which is included in the file and it
     rejects files which don't begin with an encrypted message.

`--verify'
     Assume that the first argument is a signed file or a detached
     signature and verify it without generating any output. With no
     arguments, the signature packet is read from stdin. If only a
     sigfile is given, it may be a complete signature or a detached
     signature, in which case the signed stuff is expected in a file
     without the ".sig" or ".asc" extension.  With more than 1
     argument, the first should be a detached signature and the
     remaining files are the signed stuff. To read the signed stuff
     from stdin, use `-' as the second filename.  For security reasons
     a detached signature cannot read the signed material from stdin
     without denoting it in the above way.

`--multifile'
     This modifies certain other commands to accept multiple files for
     processing on the command line or read from stdin with each
     filename on a separate line. This allows for many files to be
     processed at once. `--multifile' may currently be used along with
     `--verify', `--encrypt', and `--decrypt'. Note that `--multifile
     --verify' may not be used with detached signatures.

`--verify-files'
     Identical to `--multifile --verify'.

`--encrypt-files'
     Identical to `--multifile --encrypt'.

`--decrypt-files'
     Identical to `--multifile --decrypt'.

`--list-keys'
`-k'
`--list-public-keys'
     List all keys from the public keyrings, or just the keys given on
     the command line.  `-k' is slightly different from `--list-keys'
     in that it allows only for one argument and takes the second
     argument as the keyring to search.  This is for command line
     compatibility with PGP 2 and has been removed in `gpg2'.

     Avoid using the output of this command in scripts or other
     programs as it is likely to change as GnuPG changes. See
     `--with-colons' for a machine-parseable key listing command that
     is appropriate for use in scripts and other programs.

`--list-secret-keys'
`-K'
     List all keys from the secret keyrings, or just the ones given on
     the command line. A `#' after the letters `sec' means that the
     secret key is not usable (for example, if it was created via
     `--export-secret-subkeys').

`--list-sigs'
     Same as `--list-keys', but the signatures are listed too.

     For each signature listed, there are several flags in between the
     "sig" tag and keyid. These flags give additional information about
     each signature. From left to right, they are the numbers 1-3 for
     certificate check level (see `--ask-cert-level'), "L" for a local
     or non-exportable signature (see `--lsign-key'), "R" for a
     nonRevocable signature (see the `--edit-key' command "nrsign"),
     "P" for a signature that contains a policy URL (see
     `--cert-policy-url'), "N" for a signature that contains a notation
     (see `--cert-notation'), "X" for an eXpired signature (see
     `--ask-cert-expire'), and the numbers 1-9 or "T" for 10 and above
     to indicate trust signature levels (see the `--edit-key' command
     "tsign").

`--check-sigs'
     Same as `--list-sigs', but the signatures are verified.

`--fingerprint'
     List all keys (or the specified ones) along with their
     fingerprints. This is the same output as `--list-keys' but with
     the additional output of a line with the fingerprint. May also be
     combined with `--list-sigs' or `--check-sigs'.  If this command is
     given twice, the fingerprints of all secondary keys are listed too.

`--list-packets'
     List only the sequence of packets. This is mainly useful for
     debugging.

`--card-edit'
     Present a menu to work with a smartcard. The subcommand "help"
     provides an overview on available commands. For a detailed
     description, please see the Card HOWTO at
     http://www.gnupg.org/documentation/howtos.html#GnuPG-cardHOWTO .

`--card-status'
     Show the content of the smart card.

`--change-pin'
     Present a menu to allow changing the PIN of a smartcard. This
     functionality is also available as the subcommand "passwd" with the
     `--card-edit' command.

`--delete-key `name''
     Remove key from the public keyring. In batch mode either `--yes' is
     required or the key must be specified by fingerprint. This is a
     safeguard against accidental deletion of multiple keys.

`--delete-secret-key `name''
     Remove key from the secret and public keyring. In batch mode the
     key must be specified by fingerprint.

`--delete-secret-and-public-key `name''
     Same as `--delete-key', but if a secret key exists, it will be
     removed first. In batch mode the key must be specified by
     fingerprint.

`--export'
     Either export all keys from all keyrings (default keyrings and
     those registered via option `--keyring'), or if at least one name
     is given, those of the given name. The new keyring is written to
     stdout or to the file given with option `--output'. Use together
     with `--armor' to mail those keys.

`--send-keys `key IDs''
     Similar to `--export' but sends the keys to a keyserver.
     Fingerprints may be used instead of key IDs. Option `--keyserver'
     must be used to give the name of this keyserver. Don't send your
     complete keyring to a keyserver -- select only those keys which
     are new or changed by you.

`--export-secret-keys'
`--export-secret-subkeys'
     Same as `--export', but exports the secret keys instead.  This is
     normally not very useful and a security risk.  The second form of
     the command has the special property to render the secret part of
     the primary key useless; this is a GNU extension to OpenPGP and
     other implementations can not be expected to successfully import
     such a key.  See the option `--simple-sk-checksum' if you want to
     import such an exported key with an older OpenPGP implementation.

`--import'
`--fast-import'
     Import/merge keys. This adds the given keys to the keyring. The
     fast version is currently just a synonym.

     There are a few other options which control how this command works.
     Most notable here is the `--keyserver-options merge-only' option
     which does not insert new keys but does only the merging of new
     signatures, user-IDs and subkeys.

`--recv-keys `key IDs''
     Import the keys with the given key IDs from a keyserver. Option
     `--keyserver' must be used to give the name of this keyserver.

`--refresh-keys'
     Request updates from a keyserver for keys that already exist on the
     local keyring. This is useful for updating a key with the latest
     signatures, user IDs, etc. Calling this with no arguments will
     refresh the entire keyring. Option `--keyserver' must be used to
     give the name of the keyserver for all keys that do not have
     preferred keyservers set (see `--keyserver-options
     honor-keyserver-url').

`--search-keys `names''
     Search the keyserver for the given names. Multiple names given
     here will be joined together to create the search string for the
     keyserver.  Option `--keyserver' must be used to give the name of
     this keyserver.  Keyservers that support different search methods
     allow using the syntax specified in "How to specify a user ID"
     below. Note that different keyserver types support different
     search methods. Currently only LDAP supports them all.

`--fetch-keys `URIs''
     Retrieve keys located at the specified URIs. Note that different
     installations of GnuPG may support different protocols (HTTP, FTP,
     LDAP, etc.)

`--update-trustdb'
     Do trust database maintenance. This command iterates over all keys
     and builds the Web of Trust. This is an interactive command
     because it may have to ask for the "ownertrust" values for keys.
     The user has to give an estimation of how far she trusts the owner
     of the displayed key to correctly certify (sign) other keys. GnuPG
     only asks for the ownertrust value if it has not yet been assigned
     to a key. Using the `--edit-key' menu, the assigned value can be
     changed at any time.

`--check-trustdb'
     Do trust database maintenance without user interaction. From time
     to time the trust database must be updated so that expired keys or
     signatures and the resulting changes in the Web of Trust can be
     tracked. Normally, GnuPG will calculate when this is required and
     do it automatically unless `--no-auto-check-trustdb' is set. This
     command can be used to force a trust database check at any time.
     The processing is identical to that of `--update-trustdb' but it
     skips keys with a not yet defined "ownertrust".

     For use with cron jobs, this command can be used together with
     `--batch' in which case the trust database check is done only if a
     check is needed. To force a run even in batch mode add the option
     `--yes'.

`--export-ownertrust'
     Send the ownertrust values to stdout. This is useful for backup
     purposes as these values are the only ones which can't be
     re-created from a corrupted trust DB.

`--import-ownertrust'
     Update the trustdb with the ownertrust values stored in `files' (or
     stdin if not given); existing values will be overwritten.

`--rebuild-keydb-caches'
     When updating from version 1.0.6 to 1.0.7 this command should be
     used to create signature caches in the keyring. It might be handy
     in other situations too.

`--print-md `algo''
`--print-mds'
     Print message digest of algorithm ALGO for all given files or
     stdin.  With the second form (or a deprecated "*" as algo) digests
     for all available algorithms are printed.

`--gen-random `0|1|2''
     Emit COUNT random bytes of the given quality level. If count is
     not given or zero, an endless sequence of random bytes will be
     emitted.  PLEASE, don't use this command unless you know what you
     are doing; it may remove precious entropy from the system!

`--gen-prime `mode'  `bits''
     Use the source, Luke :-). The output format is still subject to
     change.

`--enarmor'

`--dearmor'
     Pack or unpack an arbitrary input into/from an OpenPGP ASCII armor.
     This is a GnuPG extension to OpenPGP and in general not very
     useful.



File: gnupg1.info,  Node: OpenPGP Key Management,  Prev: Operational GPG Commands,  Up: GPG Commands

1.1.3 How to manage your keys
-----------------------------

This section explains the main commands for key management

`--gen-key'
     Generate a new key pair. This command is normally only used
     interactively.

     There is an experimental feature which allows you to create keys in
     batch mode. See the file `doc/DETAILS' in the source distribution
     on how to use this.

`--gen-revoke `name''
     Generate a revocation certificate for the complete key. To revoke
     a subkey or a signature, use the `--edit' command.

`--desig-revoke `name''
     Generate a designated revocation certificate for a key. This
     allows a user (with the permission of the keyholder) to revoke
     someone else's key.

`--edit-key'
     Present a menu which enables you to do most of the key management
     related tasks.  It expects the specification of a key on the
     command line.

    sign
          Make a signature on key of user `name' If the key is not yet
          signed by the default user (or the users given with -u), the
          program displays the information of the key again, together
          with its fingerprint and asks whether it should be signed.
          This question is repeated for all users specified with -u.

    lsign
          Same as "sign" but the signature is marked as non-exportable
          and will therefore never be used by others. This may be used
          to make keys valid only in the local environment.

    nrsign
          Same as "sign" but the signature is marked as non-revocable
          and can therefore never be revoked.

    tsign
          Make a trust signature. This is a signature that combines the
          notions of certification (like a regular signature), and
          trust (like the "trust" command). It is generally only useful
          in distinct communities or groups.

     Note that "l" (for local / non-exportable), "nr" (for
     non-revocable, and "t" (for trust) may be freely mixed and
     prefixed to "sign" to create a signature of any type desired.

    revsig
          Revoke a signature. For every signature which has been
          generated by one of the secret keys, GnuPG asks whether a
          revocation certificate should be generated.

    trust
          Change the owner trust value. This updates the trust-db
          immediately and no save is required.

    disable
    enable
          Disable or enable an entire key. A disabled key can not
          normally be used for encryption.

    adduid
          Create an alternate user id.

    addphoto
          Create a photographic user id. This will prompt for a JPEG
          file that will be embedded into the user ID. Note that a very
          large JPEG will make for a very large key. Also note that
          some programs will display your JPEG unchanged (GnuPG), and
          some programs will scale it to fit in a dialog box (PGP).

    deluid
          Delete a user id.  Note that it is not possible to retract a
          user id, once it has been send to the public (i.e. to a
          keyserver).  In that case you better use `revuid'.

    delsig
          Delete a signature. Note that it is not possible to retract a
          signature, once it has been send to the public (i.e. to a
          keyserver).  In that case you better use `revsig'.

    revuid
          Revoke a user id.

    addkey
          Add a subkey to this key.

    addcardkey
          Generate a key on a card and add it to this key.

    keytocard
          Transfer the selected secret key (or the primary key if no
          key has been selected) to a smartcard. The secret key in the
          keyring will be replaced by a stub if the key could be stored
          successfully on the card and you use the save command later.
          Only certain key types may be transferred to the card. A sub
          menu allows you to select on what card to store the key. Note
          that it is not possible to get that key back from the card -
          if the card gets broken your secret key will be lost unless
          you have a backup somewhere.

    bkuptocard `file'
          Restore the given file to a card. This command may be used to
          restore a backup key (as generated during card
          initialization) to a new card. In almost all cases this will
          be the encryption key. You should use this command only with
          the corresponding public key and make sure that the file
          given as argument is indeed the backup to restore. You should
          then select 2 to restore as encryption key.  You will first
          be asked to enter the passphrase of the backup key and then
          for the Admin PIN of the card.

    delkey
          Remove a subkey (secondart key). Note that it is not possible
          to retract a subkey, once it has been send to the public
          (i.e. to a keyserver).  In that case you better use `revkey'.

    addrevoker
          Add a designated revoker. This takes one optional argument:
          "sensitive". If a designated revoker is marked as sensitive,
          it will not be exported by default (see export-options).

    revkey
          Revoke a subkey.

    expire
          Change the key expiration time. If a subkey is selected, the
          expiration time of this subkey will be changed. With no
          selection, the key expiration of the primary key is changed.

    passwd
          Change the passphrase of the secret key.

    primary
          Flag the current user id as the primary one, removes the
          primary user id flag from all other user ids and sets the
          timestamp of all affected self-signatures one second ahead.
          Note that setting a photo user ID as primary makes it primary
          over other photo user IDs, and setting a regular user ID as
          primary makes it primary over other regular user IDs.

    uid `n'
          Toggle selection of user id with index `n'.  Use 0 to
          deselect all.

    key `n'
          Toggle selection of subkey with index `n'.  Use 0 to deselect
          all.

    check
          Check all selected user ids.

    showphoto
          Display the selected photographic user id.

    pref
          List preferences from the selected user ID. This shows the
          actual preferences, without including any implied preferences.

    showpref
          More verbose preferences listing for the selected user ID.
          This shows the preferences in effect by including the implied
          preferences of 3DES (cipher), SHA-1 (digest), and
          Uncompressed (compression) if they are not already included
          in the preference list. In addition, the preferred keyserver
          and signature notations (if any) are shown.

    setpref `string'
          Set the list of user ID preferences to `string' for all (or
          just the selected) user IDs. Calling setpref with no
          arguments sets the preference list to the default (either
          built-in or set via `--default-preference-list'), and calling
          setpref with "none" as the argument sets an empty preference
          list. Use `gpg --version' to get a list of available
          algorithms. Note that while you can change the preferences on
          an attribute user ID (aka "photo ID"), GnuPG does not select
          keys via attribute user IDs so these preferences will not be
          used by GnuPG.

    keyserver
          Set a preferred keyserver for the specified user ID(s). This
          allows other users to know where you prefer they get your key
          from. See `--keyserver-options honor-keyserver-url' for more
          on how this works.  Setting a value of "none" removes an
          existing preferred keyserver.

    notation
          Set a name=value notation for the specified user ID(s). See
          `--cert-notation' for more on how this works. Setting a value
          of "none" removes all notations, setting a notation prefixed
          with a minus sign (-) removes that notation, and setting a
          notation name (without the =value) prefixed with a minus sign
          removes all notations with that name.

    toggle
          Toggle between public and secret key listing.

    clean
          Compact (by removing all signatures except the selfsig) any
          user ID that is no longer usable (e.g. revoked, or expired).
          Then, remove any signatures that are not usable by the trust
          calculations.  Specifically, this removes any signature that
          does not validate, any signature that is superseded by a
          later signature, revoked signatures, and signatures issued by
          keys that are not present on the keyring.

    minimize
          Make the key as small as possible. This removes all
          signatures from each user ID except for the most recent
          self-signature.

    cross-certify
          Add cross-certification signatures to signing subkeys that
          may not currently have them. Cross-certification signatures
          protect against a subtle attack against signing subkeys. See
          `--require-cross-certification'.

    save
          Save all changes to the key rings and quit.

    quit
          Quit the program without updating the key rings.


     The listing shows you the key with its secondary keys and all user
     ids. Selected keys or user ids are indicated by an asterisk. The
     trust value is displayed with the primary key: the first is the
     assigned owner trust and the second is the calculated trust value.
     Letters are used for the values:

    -
          No ownertrust assigned / not yet calculated.

    e
          Trust calculation has failed; probably due to an expired key.

    q
          Not enough information for calculation.

    n
          Never trust this key.

    m
          Marginally trusted.

    f
          Fully trusted.

    u
          Ultimately trusted.

`--sign-key `name''
     Signs a public key with your secret key. This is a shortcut
     version of the subcommand "sign" from `--edit'.

`--lsign-key `name''
     Signs a public key with your secret key but marks it as
     non-exportable. This is a shortcut version of the subcommand
     "lsign" from `--edit-key'.



File: gnupg1.info,  Node: GPG Options,  Next: GPG Configuration,  Prev: GPG Commands,  Up: Invoking GPG

1.2 Option Summary
==================

`gpg' comes features a bunch of options to control the exact behaviour
and to change the default configuration.

* Menu:

* GPG Configuration Options::   How to change the configuration.
* GPG Key related Options::     Key related options.
* GPG Input and Output::        Input and Output.
* OpenPGP Options::             OpenPGP protocol specific options.
* GPG Esoteric Options::        Doing things one usually don't want to do.

   Long options can be put in an options file (default
"~/.gnupg/gpg.conf"). Short option names will not work - for example,
"armor" is a valid option for the options file, while "a" is not. Do not
write the 2 dashes, but simply the name of the option and any required
arguments. Lines with a hash ('#') as the first non-white-space
character are ignored. Commands may be put in this file too, but that is
not generally useful as the command will execute automatically with
every execution of gpg.

   Please remember that option parsing stops as soon as a non-option is
encountered, you can explicitly stop parsing by using the special option
`--'.


File: gnupg1.info,  Node: GPG Configuration Options,  Next: GPG Key related Options,  Up: GPG Options

1.2.1 How to change the configuration
-------------------------------------

These options are used to change the configuraton and are usually found
in the option file.

`--default-key NAME'
     Use NAME as the default key to sign with. If this option is not
     used, the default key is the first key found in the secret keyring.
     Note that `-u' or `--local-user' overrides this option.

`--default-recipient NAME'
     Use NAME as default recipient if option `--recipient' is not used
     and don't ask if this is a valid one. NAME must be non-empty.

`--default-recipient-self'
     Use the default key as default recipient if option `--recipient'
     is not used and don't ask if this is a valid one. The default key
     is the first one from the secret keyring or the one set with
     `--default-key'.

`--no-default-recipient'
     Reset `--default-recipient' and `--default-recipient-self'.

`-v, --verbose'
     Give more information during processing. If used twice, the input
     data is listed in detail.

`--no-verbose'
     Reset verbose level to 0.

`-q, --quiet'
     Try to be as quiet as possible.

`--list-options `parameters''
     This is a space or comma delimited string that gives options used
     when listing keys and signatures (that is, `--list-keys',
     `--list-sigs', `--list-public-keys', `--list-secret-keys', and the
     `--edit-key' functions).  Options can be prepended with a `no-'
     (after the two dashes) to give the opposite meaning.  The options
     are:

    show-photos
          Causes `--list-keys', `--list-sigs', `--list-public-keys',
          and `--list-secret-keys' to display any photo IDs attached to
          the key.  Defaults to no. See also `--photo-viewer'.

    show-policy-urls
          Show policy URLs in the `--list-sigs' or `--check-sigs'
          listings.  Defaults to no.

    show-notations
    show-std-notations
    show-user-notations
          Show all, IETF standard, or user-defined signature notations
          in the `--list-sigs' or `--check-sigs' listings. Defaults to
          no.

    show-keyserver-urls
          Show any preferred keyserver URL in the `--list-sigs' or
          `--check-sigs' listings. Defaults to no.

    show-uid-validity
          Display the calculated validity of user IDs during key
          listings.  Defaults to no.

    show-unusable-uids
          Show revoked and expired user IDs in key listings. Defaults
          to no.

    show-unusable-subkeys
          Show revoked and expired subkeys in key listings. Defaults to
          no.

    show-keyring
          Display the keyring name at the head of key listings to show
          which keyring a given key resides on. Defaults to no.

    show-sig-expire
          Show signature expiration dates (if any) during `--list-sigs'
          or `--check-sigs' listings. Defaults to no.

    show-sig-subpackets
          Include signature subpackets in the key listing. This option
          can take an optional argument list of the subpackets to list.
          If no argument is passed, list all subpackets. Defaults to
          no. This option is only meaningful when using `--with-colons'
          along with `--list-sigs' or `--check-sigs'.

`--verify-options `parameters''
     This is a space or comma delimited string that gives options used
     when verifying signatures. Options can be prepended with a `no-'
     to give the opposite meaning. The options are:

    show-photos
          Display any photo IDs present on the key that issued the
          signature.  Defaults to no. See also `--photo-viewer'.

    show-policy-urls
          Show policy URLs in the signature being verified. Defaults to
          no.

    show-notations
    show-std-notations
    show-user-notations
          Show all, IETF standard, or user-defined signature notations
          in the signature being verified. Defaults to IETF standard.

    show-keyserver-urls
          Show any preferred keyserver URL in the signature being
          verified.  Defaults to no.

    show-uid-validity
          Display the calculated validity of the user IDs on the key
          that issued the signature. Defaults to no.

    show-unusable-uids
          Show revoked and expired user IDs during signature
          verification.  Defaults to no.

    pka-lookups
          Enable PKA lookups to verify sender addresses. Note that PKA
          is based on DNS, and so enabling this option may disclose
          information on when and what signatures are verified or to
          whom data is encrypted. This is similar to the "web bug"
          described for the auto-key-retrieve feature.

    pka-trust-increase
          Raise the trust in a signature to full if the signature
          passes PKA validation. This option is only meaningful if
          pka-lookups is set.

`--enable-dsa2'
`--disable-dsa2'
     Enables new-style DSA keys which (unlike the old style) may be
     larger than 1024 bit and use hashes other than SHA-1 and
     RIPEMD/160. Note that very few programs currently support these
     keys and signatures from them.

`--photo-viewer `string''
     This is the command line that should be run to view a photo ID.
     "%i" will be expanded to a filename containing the photo. "%I"
     does the same, except the file will not be deleted once the viewer
     exits.  Other flags are "%k" for the key ID, "%K" for the long key
     ID, "%f" for the key fingerprint, "%t" for the extension of the
     image type (e.g. "jpg"), "%T" for the MIME type of the image (e.g.
     "image/jpeg"), and "%%" for an actual percent sign. If neither %i
     or %I are present, then the photo will be supplied to the viewer
     on standard input.

     The default viewer is "xloadimage -fork -quiet -title 'KeyID 0x%k'
     stdin". Note that if your image viewer program is not secure, then
     executing it from GnuPG does not make it secure.

`--exec-path `string''
     Sets a list of directories to search for photo viewers and
     keyserver helpers. If not provided, keyserver helpers use the
     compiled-in default directory, and photo viewers use the $PATH
     environment variable.  Note, that on W32 system this value is
     ignored when searching for keyserver helpers.

`--keyring `file''
     Add `file' to the current list of keyrings. If `file' begins with
     a tilde and a slash, these are replaced by the $HOME directory. If
     the filename does not contain a slash, it is assumed to be in the
     GnuPG home directory ("~/.gnupg" if `--homedir' or $GNUPGHOME is
     not used).

     Note that this adds a keyring to the current list. If the intent
     is to use the specified keyring alone, use `--keyring' along with
     `--no-default-keyring'.

`--secret-keyring `file''
     Same as `--keyring' but for the secret keyrings.

`--primary-keyring `file''
     Designate `file' as the primary public keyring. This means that
     newly imported keys (via `--import' or keyserver `--recv-from')
     will go to this keyring.

`--trustdb-name `file''
     Use `file' instead of the default trustdb. If `file' begins with a
     tilde and a slash, these are replaced by the $HOME directory. If
     the filename does not contain a slash, it is assumed to be in the
     GnuPG home directory (`~/.gnupg' if `--homedir' or $GNUPGHOME is
     not used).

`--homedir DIR'
     Set the name of the home directory to DIR. If his option is not
     used, the home directory defaults to `~/.gnupg'.  It is only
     recognized when given on the command line.  It also overrides any
     home directory stated through the environment variable `GNUPGHOME'
     or (on W32 systems) by means on the Registry entry
     HKCU\SOFTWARE\GNU\GNUPG:HOMEDIR.

`--pcsc-driver `file''
     Use `file' to access the smartcard reader. The current default is
     `libpcsclite.so.1' for GLIBC based systems,
     `/System/Library/Frameworks/PCSC.framework/PCSC' for MAC OS X,
     `winscard.dll' for Windows and `libpcsclite.so' for other systems.

`--disable-ccid'
     Disable the integrated support for CCID compliant readers. This
     allows to fall back to one of the other drivers even if the
     internal CCID driver can handle the reader. Note, that CCID
     support is only available if libusb was available at build time.

`--reader-port `number_or_string''
     This option may be used to specify the port of the card terminal. A
     value of 0 refers to the first serial device; add 32768 to access
     USB devices. The default is 32768 (first USB device). PC/SC or CCID
     readers might need a string here; run the program in verbose mode
     to get a list of available readers. The default is then the first
     reader found.

`--display-charset `name''
     Set the name of the native character set. This is used to convert
     some informational strings like user IDs to the proper UTF-8
     encoding.  Note that this has nothing to do with the character set
     of data to be encrypted or signed; GnuPG does not recode user
     supplied data. If this option is not used, the default character
     set is determined from the current locale. A verbosity level of 3
     shows the chosen set.  Valid values for `name' are:

    iso-8859-1
          This is the Latin 1 set.

    iso-8859-2
          The Latin 2 set.

    iso-8859-15
          This is currently an alias for the Latin 1 set.

    koi8-r
          The usual Russian set (rfc1489).

    utf-8
          Bypass all translations and assume that the OS uses native
          UTF-8 encoding.

`--utf8-strings'
`--no-utf8-strings'
     Assume that command line arguments are given as UTF8 strings. The
     default (`--no-utf8-strings') is to assume that arguments are
     encoded in the character set as specified by `--display-charset'.
     These options affect all following arguments. Both options may be
     used multiple times.

`--options `file''
     Read options from `file' and do not try to read them from the
     default options file in the homedir (see `--homedir'). This option
     is ignored if used in an options file.

`--no-options'
     Shortcut for `--options /dev/null'. This option is detected before
     an attempt to open an option file.  Using this option will also
     prevent the creation of a `~/.gnupg' homedir.

`-z `n''
`--compress-level `n''
`--bzip2-compress-level `n''
     Set compression level to `n' for the ZIP and ZLIB compression
     algorithms. The default is to use the default compression level of
     zlib (normally 6). `--bzip2-compress-level' sets the compression
     level for the BZIP2 compression algorithm (defaulting to 6 as
     well). This is a different option from `--compress-level' since
     BZIP2 uses a significant amount of memory for each additional
     compression level.  `-z' sets both. A value of 0 for `n' disables
     compression.

`--bzip2-decompress-lowmem'
     Use a different decompression method for BZIP2 compressed files.
     This alternate method uses a bit more than half the memory, but
     also runs at half the speed. This is useful under extreme low
     memory circumstances when the file was originally compressed at a
     high `--bzip2-compress-level'.

`--mangle-dos-filenames'
`--no-mangle-dos-filenames'
     Older version of Windows cannot handle filenames with more than one
     dot. `--mangle-dos-filenames' causes GnuPG to replace (rather than
     add to) the extension of an output filename to avoid this problem.
     This option is off by default and has no effect on non-Windows
     platforms.

`--ask-cert-level'
`--no-ask-cert-level'
     When making a key signature, prompt for a certification level. If
     this option is not specified, the certification level used is set
     via `--default-cert-level'. See `--default-cert-level' for
     information on the specific levels and how they are used.
     `--no-ask-cert-level' disables this option. This option defaults
     to no.

`--default-cert-level `n''
     The default to use for the check level when signing a key.

     0 means you make no particular claim as to how carefully you
     verified the key.

     1 means you believe the key is owned by the person who claims to
     own it but you could not, or did not verify the key at all. This is
     useful for a "persona" verification, where you sign the key of a
     pseudonymous user.

     2 means you did casual verification of the key. For example, this
     could mean that you verified that the key fingerprint and checked
     the user ID on the key against a photo ID.

     3 means you did extensive verification of the key. For example,
     this could mean that you verified the key fingerprint with the
     owner of the key in person, and that you checked, by means of a
     hard to forge document with a photo ID (such as a passport) that
     the name of the key owner matches the name in the user ID on the
     key, and finally that you verified (by exchange of email) that the
     email address on the key belongs to the key owner.

     Note that the examples given above for levels 2 and 3 are just
     that: examples. In the end, it is up to you to decide just what
     "casual" and "extensive" mean to you.

     This option defaults to 0 (no particular claim).

`--min-cert-level'
     When building the trust database, treat any signatures with a
     certification level below this as invalid. Defaults to 2, which
     disregards level 1 signatures. Note that level 0 "no particular
     claim" signatures are always accepted.

`--trusted-key `long key ID''
     Assume that the specified key (which must be given as a full 8
     byte key ID) is as trustworthy as one of your own secret keys.
     This option is useful if you don't want to keep your secret keys
     (or one of them) online but still want to be able to check the
     validity of a given recipient's or signator's key.

`--trust-model `pgp|classic|direct|always|auto''
     Set what trust model GnuPG should follow. The models are:

    pgp
          This is the Web of Trust combined with trust signatures as
          used in PGP 5.x and later. This is the default trust model
          when creating a new trust database.

    classic
          This is the standard Web of Trust as used in PGP 2.x and
          earlier.

    direct
          Key validity is set directly by the user and not calculated
          via the Web of Trust.

    always
          Skip key validation and assume that used keys are always fully
          trusted. You generally won't use this unless you are using
          some external validation scheme. This option also suppresses
          the "[uncertain]" tag printed with signature checks when
          there is no evidence that the user ID is bound to the key.

    auto
          Select the trust model depending on whatever the internal
          trust database says. This is the default model if such a
          database already exists.

`--auto-key-locate `parameters''
`--no-auto-key-locate'
     GnuPG can automatically locate and retrieve keys as needed using
     this option. This happens when encrypting to an email address (in
     the "user@example.com" form), and there are no user@example.com
     keys on the local keyring. This option takes any number of the
     following arguments, in the order they are to be tried:

    cert
          locate a key using DNS CERT, as specified in 2538bis
          (currently in draft): http://www.josefsson.org/rfc2538bis/

    pka
          locate a key using DNS PKA.

    ldap
          locate a key using the PGP Universal method of checking
          "ldap://keys.(thedomain)".

    keyserver
          locate a key using whatever keyserver is defined using the
          `--keyserver' option.

    (keyserver URL)
          In addition, a keyserver URL as used in the `--keyserver'
          option may be used here to query that particular keyserver.

`--keyid-format `short|0xshort|long|0xlong''
     Select how to display key IDs. "short" is the traditional
     8-character key ID. "long" is the more accurate (but less
     convenient) 16-character key ID. Add an "0x" to either to include
     an "0x" at the beginning of the key ID, as in 0x99242560.

`--keyserver `name''
     Use `name' as your keyserver. This is the server that
     `--recv-keys', `--send-keys', and `--search-keys' will communicate
     with to receive keys from, send keys to, and search for keys on.
     The format of the `name' is a URI:
     `scheme:[//]keyservername[:port]' The scheme is the type of
     keyserver: "hkp" for the HTTP (or compatible) keyservers, "ldap"
     for the LDAP keyservers, or "mailto" for the Graff email
     keyserver. Note that your particular installation of GnuPG may
     have other keyserver types available as well. Keyserver schemes
     are case-insensitive. After the keyserver name, optional keyserver
     configuration options may be provided. These are the same as the
     global `--keyserver-options' from below, but apply only to this
     particular keyserver.

     Most keyservers synchronize with each other, so there is generally
     no need to send keys to more than one server. The keyserver
     `hkp://subkeys.pgp.net' uses round robin DNS to give a different
     keyserver each time you use it.

`--keyserver-options `name=value1 ''
     This is a space or comma delimited string that gives options for
     the keyserver. Options can be prepended with a `no-' to give the
     opposite meaning. Valid import-options or export-options may be
     used here as well to apply to importing (`--recv-key') or exporting
     (`--send-key') a key from a keyserver. While not all options are
     available for all keyserver types, some common options are:

    include-revoked
          When searching for a key with `--search-keys', include keys
          that are marked on the keyserver as revoked. Note that not
          all keyservers differentiate between revoked and unrevoked
          keys, and for such keyservers this option is meaningless.
          Note also that most keyservers do not have cryptographic
          verification of key revocations, and so turning this option
          off may result in skipping keys that are incorrectly marked
          as revoked.

    include-disabled
          When searching for a key with `--search-keys', include keys
          that are marked on the keyserver as disabled. Note that this
          option is not used with HKP keyservers.

    auto-key-retrieve
          This option enables the automatic retrieving of keys from a
          keyserver when verifying signatures made by keys that are not
          on the local keyring.

          Note that this option makes a "web bug" like behavior
          possible.  Keyserver operators can see which keys you
          request, so by sending you a message signed by a brand new
          key (which you naturally will not have on your local
          keyring), the operator can tell both your IP address and the
          time when you verified the signature.

    honor-keyserver-url
          When using `--refresh-keys', if the key in question has a
          preferred keyserver URL, then use that preferred keyserver to
          refresh the key from. In addition, if auto-key-retrieve is
          set, and the signature being verified has a preferred
          keyserver URL, then use that preferred keyserver to fetch the
          key from. Defaults to yes.

    honor-pka-record
          If auto-key-retrieve is set, and the signature being verified
          has a PKA record, then use the PKA information to fetch the
          key. Defaults to yes.

    include-subkeys
          When receiving a key, include subkeys as potential targets.
          Note that this option is not used with HKP keyservers, as
          they do not support retrieving keys by subkey id.

    use-temp-files
          On most Unix-like platforms, GnuPG communicates with the
          keyserver helper program via pipes, which is the most
          efficient method. This option forces GnuPG to use temporary
          files to communicate. On some platforms (such as Win32 and
          RISC OS), this option is always enabled.

    keep-temp-files
          If using `use-temp-files', do not delete the temp files after
          using them. This option is useful to learn the keyserver
          communication protocol by reading the temporary files.

    verbose
          Tell the keyserver helper program to be more verbose. This
          option can be repeated multiple times to increase the
          verbosity level.

    timeout
          Tell the keyserver helper program how long (in seconds) to
          try and perform a keyserver action before giving up. Note
          that performing multiple actions at the same time uses this
          timeout value per action.  For example, when retrieving
          multiple keys via `--recv-keys', the timeout applies
          separately to each key retrieval, and not to the
          `--recv-keys' command as a whole. Defaults to 30 seconds.

    http-proxy
          For HTTP-like keyserver schemes that (such as HKP and HTTP
          itself), try to access the keyserver over a proxy. If a
          `value' is specified, use this as the HTTP proxy. If no
          `value' is specified, the value of the environment variable
          "http_proxy", if any, will be used.

    max-cert-size
          When retrieving a key via DNS CERT, only accept keys up to
          this size.  Defaults to 16384 bytes.

`--completes-needed `n''
     Number of completely trusted users to introduce a new key signer
     (defaults to 1).

`--marginals-needed `n''
     Number of marginally trusted users to introduce a new key signer
     (defaults to 3)

`--max-cert-depth `n''
     Maximum depth of a certification chain (default is 5).

`--simple-sk-checksum'
     Secret keys are integrity protected by using a SHA-1 checksum. This
     method is part of the upcoming enhanced OpenPGP specification but
     GnuPG already uses it as a countermeasure against certain attacks.
     Old applications don't understand this new format, so this option
     may be used to switch back to the old behaviour. Using this option
     bears a security risk. Note that using this option only takes
     effect when the secret key is encrypted - the simplest way to make
     this happen is to change the passphrase on the key (even changing
     it to the same value is acceptable).

`--no-sig-cache'
     Do not cache the verification status of key signatures.  Caching
     gives a much better performance in key listings. However, if you
     suspect that your public keyring is not save against write
     modifications, you can use this option to disable the caching. It
     probably does not make sense to disable it because all kind of
     damage can be done if someone else has write access to your public
     keyring.

`--no-sig-create-check'
     GnuPG normally verifies each signature right after creation to
     protect against bugs and hardware malfunctions which could leak
     out bits from the secret key. This extra verification needs some
     time (about 115% for DSA keys), and so this option can be used to
     disable it.  However, due to the fact that the signature creation
     needs manual interaction, this performance penalty does not matter
     in most settings.

`--auto-check-trustdb'
`--no-auto-check-trustdb'
     If GnuPG feels that its information about the Web of Trust has to
     be updated, it automatically runs the `--check-trustdb' command
     internally.  This may be a time consuming process.
     `--no-auto-check-trustdb' disables this option.

`--use-agent'
`--no-use-agent'
     Try to use the GnuPG-Agent.  With this option, GnuPG first tries to
     connect to the agent before it asks for a passphrase.
     `--no-use-agent' disables this option.

`--gpg-agent-info'
     Override the value of the environment variable `GPG_AGENT_INFO'.
     This is only used when `--use-agent' has been given

`--lock-once'
     Lock the databases the first time a lock is requested and do not
     release the lock until the process terminates.

`--lock-multiple'
     Release the locks every time a lock is no longer needed. Use this
     to override a previous `--lock-once' from a config file.

`--lock-never'
     Disable locking entirely. This option should be used only in very
     special environments, where it can be assured that only one process
     is accessing those files. A bootable floppy with a stand-alone
     encryption system will probably use this. Improper usage of this
     option may lead to data and key corruption.

`--exit-on-status-write-error'
     This option will cause write errors on the status FD to immediately
     terminate the process. That should in fact be the default but it
     never worked this way and thus we need an option to enable this,
     so that the change won't break applications which close their end
     of a status fd connected pipe too early. Using this option along
     with `--enable-progress-filter' may be used to cleanly cancel long
     running gpg operations.

`--limit-card-insert-tries `n''
     With `n' greater than 0 the number of prompts asking to insert a
     smartcard gets limited to N-1. Thus with a value of 1 gpg won't at
     all ask to insert a card if none has been inserted at startup. This
     option is useful in the configuration file in case an application
     does not know about the smartcard support and waits ad infinitum
     for an inserted card.

`--no-random-seed-file'
     GnuPG uses a file to store its internal random pool over
     invocations.  This makes random generation faster; however
     sometimes write operations are not desired. This option can be
     used to achieve that with the cost of slower random generation.

`--no-greeting'
     Suppress the initial copyright message.

`--no-secmem-warning'
     Suppress the warning about "using insecure memory".

`--no-permission-warning'
     Suppress the warning about unsafe file and home directory
     (`--homedir') permissions. Note that the permission checks that
     GnuPG performs are not intended to be authoritative, but rather
     they simply warn about certain common permission problems. Do not
     assume that the lack of a warning means that your system is secure.

     Note that the warning for unsafe `--homedir' permissions cannot be
     suppressed in the gpg.conf file, as this would allow an attacker to
     place an unsafe gpg.conf file in place, and use this file to
     suppress warnings about itself. The `--homedir' permissions
     warning may only be suppressed on the command line.

`--no-mdc-warning'
     Suppress the warning about missing MDC integrity protection.

`--require-secmem'
`--no-require-secmem'
     Refuse to run if GnuPG cannot get secure memory. Defaults to no
     (i.e. run, but give a warning).

`--require-cross-certification'
`--no-require-cross-certification'
     When verifying a signature made from a subkey, ensure that the
     cross certification "back signature" on the subkey is present and
     valid.  This protects against a subtle attack against subkeys that
     can sign.  Defaults to `--require-cross-certification' for `gpg'.

`--expert'
`--no-expert'
     Allow the user to do certain nonsensical or "silly" things like
     signing an expired or revoked key, or certain potentially
     incompatible things like generating unusual key types. This also
     disables certain warning messages about potentially incompatible
     actions. As the name implies, this option is for experts only. If
     you don't fully understand the implications of what it allows you
     to do, leave this off. `--no-expert' disables this option.



File: gnupg1.info,  Node: GPG Key related Options,  Next: GPG Input and Output,  Prev: GPG Configuration Options,  Up: GPG Options

1.2.2 Key related options
-------------------------

`--recipient NAME'
`-r'
     Encrypt for user id NAME. If this option or `--hidden-recipient'
     is not specified, GnuPG asks for the user-id unless
     `--default-recipient' is given.

`--hidden-recipient NAME'
`-R'
     Encrypt for user ID NAME, but hide the key ID of this user's key.
     This option helps to hide the receiver of the message and is a
     limited countermeasure against traffic analysis. If this option or
     `--recipient' is not specified, GnuPG asks for the user ID unless
     `--default-recipient' is given.

`--encrypt-to `name''
     Same as `--recipient' but this one is intended for use in the
     options file and may be used with your own user-id as an
     "encrypt-to-self". These keys are only used when there are other
     recipients given either by use of `--recipient' or by the asked
     user id.  No trust checking is performed for these user ids and
     even disabled keys can be used.

`--hidden-encrypt-to `name''
     Same as `--hidden-recipient' but this one is intended for use in
     the options file and may be used with your own user-id as a hidden
     "encrypt-to-self". These keys are only used when there are other
     recipients given either by use of `--recipient' or by the asked
     user id.  No trust checking is performed for these user ids and
     even disabled keys can be used.

`--no-encrypt-to'
     Disable the use of all `--encrypt-to' and `--hidden-encrypt-to'
     keys.

`--group `name=value1 ''
     Sets up a named group, which is similar to aliases in email
     programs.  Any time the group name is a recipient (`-r' or
     `--recipient'), it will be expanded to the values specified.
     Multiple groups with the same name are automatically merged into a
     single group.

     The values are `key IDs' or fingerprints, but any key description
     is accepted. Note that a value with spaces in it will be treated as
     two different values. Note also there is only one level of
     expansion -- you cannot make an group that points to another
     group. When used from the command line, it may be necessary to
     quote the argument to this option to prevent the shell from
     treating it as multiple arguments.

`--ungroup `name''
     Remove a given entry from the `--group' list.

`--no-groups'
     Remove all entries from the `--group' list.

`--local-user NAME'
`-u'
     Use NAME as the key to sign with. Note that this option overrides
     `--default-key'.

`--try-all-secrets'
     Don't look at the key ID as stored in the message but try all
     secret keys in turn to find the right decryption key. This option
     forces the behaviour as used by anonymous recipients (created by
     using `--throw-keyids') and might come handy in case where an
     encrypted message contains a bogus key ID.



File: gnupg1.info,  Node: GPG Input and Output,  Next: OpenPGP Options,  Prev: GPG Key related Options,  Up: GPG Options

1.2.3 Input and Output
----------------------

`--armor'
`-a'
     Create ASCII armored output.  The default is to create the binary
     OpenPGP format.

`--no-armor'
     Assume the input data is not in ASCII armored format.

`--output FILE'
`-o FILE'
     Write output to FILE.

`--max-output `n''
     This option sets a limit on the number of bytes that will be
     generated when processing a file. Since OpenPGP supports various
     levels of compression, it is possible that the plaintext of a
     given message may be significantly larger than the original
     OpenPGP message. While GnuPG works properly with such messages,
     there is often a desire to set a maximum file size that will be
     generated before processing is forced to stop by the OS limits.
     Defaults to 0, which means "no limit".

`--import-options `parameters''
     This is a space or comma delimited string that gives options for
     importing keys. Options can be prepended with a `no-' to give the
     opposite meaning. The options are:

    import-local-sigs
          Allow importing key signatures marked as "local". This is not
          generally useful unless a shared keyring scheme is being used.
          Defaults to no.

    repair-pks-subkey-bug
          During import, attempt to repair the damage caused by the PKS
          keyserver bug (pre version 0.9.6) that mangles keys with
          multiple subkeys. Note that this cannot completely repair the
          damaged key as some crucial data is removed by the keyserver,
          but it does at least give you back one subkey. Defaults to no
          for regular `--import' and to yes for keyserver `--recv-keys'.

    merge-only
          During import, allow key updates to existing keys, but do not
          allow any new keys to be imported. Defaults to no.

    import-clean
          After import, compact (remove all signatures except the
          self-signature) any user IDs from the new key that are not
          usable.  Then, remove any signatures from the new key that
          are not usable.  This includes signatures that were issued by
          keys that are not present on the keyring. This option is the
          same as running the `--edit-key' command "clean" after
          import. Defaults to no.

    import-minimal
          Import the smallest key possible. This removes all signatures
          except the most recent self-signature on each user ID. This
          option is the same as running the `--edit-key' command
          "minimize" after import.  Defaults to no.

`--export-options `parameters''
     This is a space or comma delimited string that gives options for
     exporting keys. Options can be prepended with a `no-' to give the
     opposite meaning. The options are:

    export-local-sigs
          Allow exporting key signatures marked as "local". This is not
          generally useful unless a shared keyring scheme is being used.
          Defaults to no.

    export-attributes
          Include attribute user IDs (photo IDs) while exporting. This
          is useful to export keys if they are going to be used by an
          OpenPGP program that does not accept attribute user IDs.
          Defaults to yes.

    export-sensitive-revkeys
          Include designated revoker information that was marked as
          "sensitive". Defaults to no.

    export-reset-subkey-passwd
          When using the `--export-secret-subkeys' command, this option
          resets the passphrases for all exported subkeys to empty.
          This is useful when the exported subkey is to be used on an
          unattended machine where a passphrase doesn't necessarily
          make sense. Defaults to no.

    export-clean
          Compact (remove all signatures from) user IDs on the key being
          exported if the user IDs are not usable. Also, do not export
          any signatures that are not usable. This includes signatures
          that were issued by keys that are not present on the keyring.
          This option is the same as running the `--edit-key' command
          "clean" before export except that the local copy of the key
          is not modified. Defaults to no.

    export-minimal
          Export the smallest key possible. This removes all signatures
          except the most recent self-signature on each user ID. This
          option is the same as running the `--edit-key' command
          "minimize" before export except that the local copy of the
          key is not modified. Defaults to no.

`--with-colons'
     Print key listings delimited by colons. Note that the output will
     be encoded in UTF-8 regardless of any `--display-charset' setting.
     This format is useful when GnuPG is called from scripts and other
     programs as it is easily machine parsed. The details of this
     format are documented in the file `doc/DETAILS', which is included
     in the GnuPG source distribution.

`--fixed-list-mode'
     Do not merge primary user ID and primary key in `--with-colon'
     listing mode and print all timestamps as seconds since 1970-01-01.

`--with-fingerprint'
     Same as the command `--fingerprint' but changes only the format of
     the output and may be used together with another command.



File: gnupg1.info,  Node: OpenPGP Options,  Next: GPG Esoteric Options,  Prev: GPG Input and Output,  Up: GPG Options

1.2.4 OpenPGP protocol specific options.
----------------------------------------

`-t, --textmode'
`--no-textmode'
     Treat input files as text and store them in the OpenPGP canonical
     text form with standard "CRLF" line endings. This also sets the
     necessary flags to inform the recipient that the encrypted or
     signed data is text and may need its line endings converted back
     to whatever the local system uses. This option is useful when
     communicating between two platforms that have different line
     ending conventions (UNIX-like to Mac, Mac to Windows, etc).
     `--no-textmode' disables this option, and is the default.

     If `-t' (but not `--textmode') is used together with armoring and
     signing, this enables clearsigned messages. This kludge is needed
     for command-line compatibility with command-line versions of PGP;
     normally you would use `--sign' or `--clearsign' to select the
     type of the signature.

`--force-v3-sigs'
`--no-force-v3-sigs'
     OpenPGP states that an implementation should generate v4 signatures
     but PGP versions 5 through 7 only recognize v4 signatures on key
     material. This option forces v3 signatures for signatures on data.
     Note that this option overrides `--ask-sig-expire', as v3
     signatures cannot have expiration dates. `--no-force-v3-sigs'
     disables this option.

`--force-v4-certs'
`--no-force-v4-certs'
     Always use v4 key signatures even on v3 keys. This option also
     changes the default hash algorithm for v3 RSA keys from MD5 to
     SHA-1.  `--no-force-v4-certs' disables this option.

`--force-mdc'
     Force the use of encryption with a modification detection code.
     This is always used with the newer ciphers (those with a blocksize
     greater than 64 bits), or if all of the recipient keys indicate
     MDC support in their feature flags.

`--disable-mdc'
     Disable the use of the modification detection code. Note that by
     using this option, the encrypted message becomes vulnerable to a
     message modification attack.

`--personal-cipher-preferences `string''
     Set the list of personal cipher preferences to `string', this list
     should be a string similar to the one printed by the command
     "pref" in the edit menu. This allows the user to factor in their
     own preferred algorithms when algorithms are chosen via recipient
     key preferences.  The most highly ranked cipher in this list is
     also used for the `--symmetric' encryption command.

`--personal-digest-preferences `string''
     Set the list of personal digest preferences to `string', this list
     should be a string similar to the one printed by the command
     "pref" in the edit menu. This allows the user to factor in their
     own preferred algorithms when algorithms are chosen via recipient
     key preferences.  The most highly ranked digest algorithm in this
     list is algo used when signing without encryption (e.g.
     `--clearsign' or `--sign'). The default value is SHA-1.

`--personal-compress-preferences `string''
     Set the list of personal compression preferences to `string', this
     list should be a string similar to the one printed by the command
     "pref" in the edit menu. This allows the user to factor in their
     own preferred algorithms when algorithms are chosen via recipient
     key preferences. The most highly ranked algorithm in this list is
     also used when there are no recipient keys to consider (e.g.
     `--symmetric').

`--s2k-cipher-algo `name''
     Use `name' as the cipher algorithm used to protect secret keys.
     The default cipher is CAST5. This cipher is also used for
     conventional encryption if `--personal-cipher-preferences' and
     `--cipher-algo' is not given.

`--s2k-digest-algo `name''
     Use `name' as the digest algorithm used to mangle the passphrases.
     The default algorithm is SHA-1.

`--s2k-mode `n''
     Selects how passphrases are mangled. If `n' is 0 a plain
     passphrase (which is not recommended) will be used, a 1 adds a
     salt to the passphrase and a 3 (the default) iterates the whole
     process a number of times (see -s2k-count).  Unless `--rfc1991' is
     used, this mode is also used for conventional encryption.

`--s2k-count `n''
     Specify how many times the passphrase mangling is repeated.  This
     value may range between 1024 and 65011712 inclusive, and the
     default is 65536.  Note that not all values in the 1024-65011712
     range are legal and if an illegal value is selected, GnuPG will
     round up to the nearest legal value.  This option is only
     meaningful if `--s2k-mode' is 3.


1.2.5 Compliance options
------------------------

These options control what GnuPG is compliant to. Only one of these
options may be active at a time. Note that the default setting of this
is nearly always the correct one. See the INTEROPERABILITY WITH OTHER
OPENPGP PROGRAMS section below before using one of these options.

`--gnupg'
     Use standard GnuPG behavior. This is essentially OpenPGP behavior
     (see `--openpgp'), but with some additional workarounds for common
     compatibility problems in different versions of PGP. This is the
     default option, so it is not generally needed, but it may be
     useful to override a different compliance option in the gpg.conf
     file.

`--openpgp'
     Reset all packet, cipher and digest options to strict OpenPGP
     behavior. Use this option to reset all previous options like
     `--rfc1991', `--force-v3-sigs', `--s2k-*', `--cipher-algo',
     `--digest-algo' and `--compress-algo' to OpenPGP compliant values.
     All PGP workarounds are disabled.

`--rfc2440'
     Reset all packet, cipher and digest options to strict RFC-2440
     behavior. Note that this is currently the same thing as
     `--openpgp'.

`--rfc1991'
     Try to be more RFC-1991 (PGP 2.x) compliant.

`--pgp2'
     Set up all options to be as PGP 2.x compliant as possible, and
     warn if an action is taken (e.g. encrypting to a non-RSA key) that
     will create a message that PGP 2.x will not be able to handle.
     Note that `PGP 2.x' here means `MIT PGP 2.6.2'. There are other
     versions of PGP 2.x available, but the MIT release is a good
     common baseline.

     This option implies `--rfc1991 --disable-mdc --no-force-v4-certs
     --no-sk-comment --escape-from-lines --force-v3-sigs
     --no-ask-sig-expire --no-ask-cert-expire --cipher-algo IDEA
     --digest-algo MD5 --compress-algo 1'. It also disables
     `--textmode' when encrypting.

`--pgp6'
     Set up all options to be as PGP 6 compliant as possible. This
     restricts you to the ciphers IDEA (if the IDEA plugin is
     installed), 3DES, and CAST5, the hashes MD5, SHA1 and RIPEMD160,
     and the compression algorithms none and ZIP. This also disables
     -throw-keyids, and making signatures with signing subkeys as PGP 6
     does not understand signatures made by signing subkeys.

     This option implies `--disable-mdc --no-sk-comment
     --escape-from-lines --force-v3-sigs --no-ask-sig-expire'.

`--pgp7'
     Set up all options to be as PGP 7 compliant as possible. This is
     identical to `--pgp6' except that MDCs are not disabled, and the
     list of allowable ciphers is expanded to add AES128, AES192,
     AES256, and TWOFISH.

`--pgp8'
     Set up all options to be as PGP 8 compliant as possible. PGP 8 is
     a lot closer to the OpenPGP standard than previous versions of
     PGP, so all this does is disable `--throw-keyids' and set
     `--escape-from-lines'.  All algorithms are allowed except for the
     SHA224, SHA384, and SHA512 digests.



File: gnupg1.info,  Node: GPG Esoteric Options,  Prev: OpenPGP Options,  Up: GPG Options

1.2.6 Doing things one usually don't want to do.
------------------------------------------------

`-n'
`--dry-run'
     Don't make any changes (this is not completely implemented).

`--list-only'
     Changes the behaviour of some commands. This is like `--dry-run'
     but different in some cases. The semantic of this command may be
     extended in the future. Currently it only skips the actual
     decryption pass and therefore enables a fast listing of the
     encryption keys.

`-i'
`--interactive'
     Prompt before overwriting any files.

`--debug FLAGS'
     Set debugging flags. All flags are or-ed and FLAGS may be given in
     C syntax (e.g. 0x0042).

`--debug-all'
     Set all useful debugging flags.

`--debug-ccid-driver'
     Enable debug output from the included CCID driver for smartcards.
     Note that this option is only available on some system.

`--enable-progress-filter'
     Enable certain PROGRESS status outputs. This option allows
     frontends to display a progress indicator while gpg is processing
     larger files.  There is a slight performance overhead using it.

`--status-fd `n''
     Write special status strings to the file descriptor `n'.  See the
     file DETAILS in the documentation for a listing of them.

`--status-file `file''
     Same as `--status-fd', except the status data is written to file
     `file'.

`--logger-fd `n''
     Write log output to file descriptor `n' and not to stderr.

`--logger-file `file''
     Same as `--logger-fd', except the logger data is written to file
     `file'.

`--attribute-fd `n''
     Write attribute subpackets to the file descriptor `n'. This is most
     useful for use with `--status-fd', since the status messages are
     needed to separate out the various subpackets from the stream
     delivered to the file descriptor.

`--attribute-file `file''
     Same as `--attribute-fd', except the attribute data is written to
     file `file'.

`--comment `string''
`--no-comments'
     Use `string' as a comment string in clear text signatures and ASCII
     armored messages or keys (see `--armor'). The default behavior is
     not to use a comment string. `--comment' may be repeated multiple
     times to get multiple comment strings. `--no-comments' removes all
     comments.  It is a good idea to keep the length of a single comment
     below 60 characters to avoid problems with mail programs wrapping
     such lines.  Note that comment lines, like all other header lines,
     are not protected by the signature.

`--emit-version'
`--no-emit-version'
     Force inclusion of the version string in ASCII armored output.
     `--no-emit-version' disables this option.

`--sig-notation `name=value''
`--cert-notation `name=value''
`-N, --set-notation `name=value''
     Put the name value pair into the signature as notation data.
     `name' must consist only of printable characters or spaces, and
     must contain a '@' character in the form keyname@domain.example.com
     (substituting the appropriate keyname and domain name, of course).
     This is to help prevent pollution of the IETF reserved notation
     namespace. The `--expert' flag overrides the '@' check. `value'
     may be any printable string; it will be encoded in UTF8, so you
     should check that your `--display-charset' is set correctly. If
     you prefix `name' with an exclamation mark (!), the notation data
     will be flagged as critical (rfc2440:5.2.3.15). `--sig-notation'
     sets a notation for data signatures. `--cert-notation' sets a
     notation for key signatures (certifications). `--set-notation'
     sets both.

     There are special codes that may be used in notation names. "%k"
     will be expanded into the key ID of the key being signed, "%K"
     into the long key ID of the key being signed, "%f" into the
     fingerprint of the key being signed, "%s" into the key ID of the
     key making the signature, "%S" into the long key ID of the key
     making the signature, "%g" into the fingerprint of the key making
     the signature (which might be a subkey), "%p" into the fingerprint
     of the primary key of the key making the signature, "%c" into the
     signature count from the OpenPGP smartcard, and "%%" results in a
     single "%". %k, %K, and %f are only meaningful when making a key
     signature (certification), and %c is only meaningful when using
     the OpenPGP smartcard.

`--sig-policy-url `string''
`--cert-policy-url `string''
`--set-policy-url `string''
     Use `string' as a Policy URL for signatures (rfc2440:5.2.3.19).  If
     you prefix it with an exclamation mark (!), the policy URL packet
     will be flagged as critical. `--sig-policy-url' sets a policy url
     for data signatures. `--cert-policy-url' sets a policy url for key
     signatures (certifications). `--set-policy-url' sets both.

     The same %-expandos used for notation data are available here as
     well.

`--sig-keyserver-url `string''
     Use `string' as a preferred keyserver URL for data signatures. If
     you prefix it with an exclamation mark, the keyserver URL packet
     will be flagged as critical.

     The same %-expandos used for notation data are available here as
     well.

`--set-filename `string''
     Use `string' as the filename which is stored inside messages.
     This overrides the default, which is to use the actual filename of
     the file being encrypted.

`--for-your-eyes-only'
`--no-for-your-eyes-only'
     Set the `for your eyes only' flag in the message. This causes GnuPG
     to refuse to save the file unless the `--output' option is given,
     and PGP to use the "secure viewer" with a Tempest-resistant font to
     display the message. This option overrides `--set-filename'.
     `--no-for-your-eyes-only' disables this option.

`--use-embedded-filename'
`--no-use-embedded-filename'
     Try to create a file with a name as embedded in the data. This can
     be a dangerous option as it allows to overwrite files. Defaults to
     no.

`--cipher-algo `name''
     Use `name' as cipher algorithm. Running the program with the
     command `--version' yields a list of supported algorithms. If this
     is not used the cipher algorithm is selected from the preferences
     stored with the key. In general, you do not want to use this
     option as it allows you to violate the OpenPGP standard.
     `--personal-cipher-preferences' is the safe way to accomplish the
     same thing.

`--digest-algo `name''
     Use `name' as the message digest algorithm. Running the program
     with the command `--version' yields a list of supported
     algorithms. In general, you do not want to use this option as it
     allows you to violate the OpenPGP standard.
     `--personal-digest-preferences' is the safe way to accomplish the
     same thing.

`--compress-algo `name''
     Use compression algorithm `name'. "zlib" is RFC-1950 ZLIB
     compression. "zip" is RFC-1951 ZIP compression which is used by
     PGP.  "bzip2" is a more modern compression scheme that can
     compress some things better than zip or zlib, but at the cost of
     more memory used during compression and decompression.
     "uncompressed" or "none" disables compression. If this option is
     not used, the default behavior is to examine the recipient key
     preferences to see which algorithms the recipient supports. If all
     else fails, ZIP is used for maximum compatibility.

     ZLIB may give better compression results than ZIP, as the
     compression window size is not limited to 8k. BZIP2 may give even
     better compression results than that, but will use a significantly
     larger amount of memory while compressing and decompressing. This
     may be significant in low memory situations. Note, however, that
     PGP (all versions) only supports ZIP compression. Using any
     algorithm other than ZIP or "none" will make the message
     unreadable with PGP. In general, you do not want to use this
     option as it allows you to violate the OpenPGP standard.
     `--personal-compress-preferences' is the safe way to accomplish
     the same thing.

`--cert-digest-algo `name''
     Use `name' as the message digest algorithm used when signing a
     key. Running the program with the command `--version' yields a
     list of supported algorithms. Be aware that if you choose an
     algorithm that GnuPG supports but other OpenPGP implementations do
     not, then some users will not be able to use the key signatures
     you make, or quite possibly your entire key.

`--disable-cipher-algo `name''
     Never allow the use of `name' as cipher algorithm.  The given name
     will not be checked so that a later loaded algorithm will still
     get disabled.

`--disable-pubkey-algo `name''
     Never allow the use of `name' as public key algorithm.  The given
     name will not be checked so that a later loaded algorithm will
     still get disabled.

`--throw-keyids'
`--no-throw-keyids'
     Do not put the recipient key IDs into encrypted messages. This
     helps to hide the receivers of the message and is a limited
     countermeasure against traffic analysis. On the receiving side, it
     may slow down the decryption process because all available secret
     keys must be tried.  `--no-throw-keyids' disables this option.
     This option is essentially the same as using `--hidden-recipient'
     for all recipients.

`--not-dash-escaped'
     This option changes the behavior of cleartext signatures so that
     they can be used for patch files. You should not send such an
     armored file via email because all spaces and line endings are
     hashed too. You can not use this option for data which has 5
     dashes at the beginning of a line, patch files don't have this. A
     special armor header line tells GnuPG about this cleartext
     signature option.

`--escape-from-lines'
`--no-escape-from-lines'
     Because some mailers change lines starting with "From " to ">From
     " it is good to handle such lines in a special way when creating
     cleartext signatures to prevent the mail system from breaking the
     signature. Note that all other PGP versions do it this way too.
     Enabled by default. `--no-escape-from-lines' disables this option.

`--passphrase-repeat `n''
     Specify how many times `gpg' will request a new passphrase be
     repeated.  This is useful for helping memorize a passphrase.
     Defaults to 1 repetition.

`--passphrase-fd `n''
     Read the passphrase from file descriptor `n'. Only the first line
     will be read from file descriptor `n'. If you use 0 for `n', the
     passphrase will be read from stdin. This can only be used if only
     one passphrase is supplied.

`--passphrase-file `file''
     Read the passphrase from file `file'. Only the first line will be
     read from file `file'. This can only be used if only one
     passphrase is supplied. Obviously, a passphrase stored in a file is
     of questionable security if other users can read this file. Don't
     use this option if you can avoid it.

`--passphrase `string''
     Use `string' as the passphrase. This can only be used if only one
     passphrase is supplied. Obviously, this is of very questionable
     security on a multi-user system. Don't use this option if you can
     avoid it.

`--command-fd `n''
     This is a replacement for the deprecated shared-memory IPC mode.
     If this option is enabled, user input on questions is not expected
     from the TTY but from the given file descriptor. It should be used
     together with `--status-fd'. See the file doc/DETAILS in the source
     distribution for details on how to use it.

`--command-file `file''
     Same as `--command-fd', except the commands are read out of file
     `file'

`--allow-non-selfsigned-uid'
`--no-allow-non-selfsigned-uid'
     Allow the import and use of keys with user IDs which are not
     self-signed. This is not recommended, as a non self-signed user ID
     is trivial to forge. `--no-allow-non-selfsigned-uid' disables.

`--allow-freeform-uid'
     Disable all checks on the form of the user ID while generating a
     new one. This option should only be used in very special
     environments as it does not ensure the de-facto standard format of
     user IDs.

`--ignore-time-conflict'
     GnuPG normally checks that the timestamps associated with keys and
     signatures have plausible values. However, sometimes a signature
     seems to be older than the key due to clock problems. This option
     makes these checks just a warning. See also `--ignore-valid-from'
     for timestamp issues on subkeys.

`--ignore-valid-from'
     GnuPG normally does not select and use subkeys created in the
     future.  This option allows the use of such keys and thus exhibits
     the pre-1.0.7 behaviour. You should not use this option unless you
     there is some clock problem. See also `--ignore-time-conflict' for
     timestamp issues with signatures.

`--ignore-crc-error'
     The ASCII armor used by OpenPGP is protected by a CRC checksum
     against transmission errors. Occasionally the CRC gets mangled
     somewhere on the transmission channel but the actual content
     (which is protected by the OpenPGP protocol anyway) is still okay.
     This option allows GnuPG to ignore CRC errors.

`--ignore-mdc-error'
     This option changes a MDC integrity protection failure into a
     warning.  This can be useful if a message is partially corrupt,
     but it is necessary to get as much data as possible out of the
     corrupt message.  However, be aware that a MDC protection failure
     may also mean that the message was tampered with intentionally by
     an attacker.

`--no-default-keyring'
     Do not add the default keyrings to the list of keyrings. Note that
     GnuPG will not operate without any keyrings, so if you use this
     option and do not provide alternate keyrings via `--keyring' or
     `--secret-keyring', then GnuPG will still use the default public or
     secret keyrings.

`--skip-verify'
     Skip the signature verification step. This may be used to make the
     decryption faster if the signature verification is not needed.

`--with-key-data'
     Print key listings delimited by colons (like `--with-colons') and
     print the public key data.

`--fast-list-mode'
     Changes the output of the list commands to work faster; this is
     achieved by leaving some parts empty. Some applications don't need
     the user ID and the trust information given in the listings. By
     using this options they can get a faster listing. The exact
     behaviour of this option may change in future versions.  If you
     are missing some information, don't use this option.

`--no-literal'
     This is not for normal use. Use the source to see for what it
     might be useful.

`--set-filesize'
     This is not for normal use. Use the source to see for what it
     might be useful.

`--show-session-key'
     Display the session key used for one message. See
     `--override-session-key' for the counterpart of this option.

     We think that Key Escrow is a Bad Thing; however the user should
     have the freedom to decide whether to go to prison or to reveal
     the content of one specific message without compromising all
     messages ever encrypted for one secret key. DON'T USE IT UNLESS
     YOU ARE REALLY FORCED TO DO SO.

`--override-session-key `string''
     Don't use the public key but the session key `string'. The format
     of this string is the same as the one printed by
     `--show-session-key'. This option is normally not used but comes
     handy in case someone forces you to reveal the content of an
     encrypted message; using this option you can do this without
     handing out the secret key.

`--ask-sig-expire'
`--no-ask-sig-expire'
     When making a data signature, prompt for an expiration time. If
     this option is not specified, the expiration time set via
     `--default-sig-expire' is used. `--no-ask-sig-expire' disables
     this option. Note that by default, `--force-v3-sigs' is set which
     also disables this option. If you want signature expiration, you
     must set `--no-force-v3-sigs' as well as turning
     `--ask-sig-expire' on.

`--default-sig-expire'
     The default expiration time to use for signature expiration. Valid
     values are "0" for no expiration, a number followed by the letter d
     (for days), w (for weeks), m (for months), or y (for years) (for
     example "2m" for two months, or "5y" for five years), or an
     absolute date in the form YYYY-MM-DD. Defaults to "0".

`--ask-cert-expire'
`--no-ask-cert-expire'
     When making a key signature, prompt for an expiration time. If this
     option is not specified, the expiration time set via
     `--default-cert-expire' is used. `--no-ask-cert-expire' disables
     this option.

`--default-cert-expire'
     The default expiration time to use for key signature expiration.
     Valid values are "0" for no expiration, a number followed by the
     letter d (for days), w (for weeks), m (for months), or y (for
     years) (for example "2m" for two months, or "5y" for five years),
     or an absolute date in the form YYYY-MM-DD. Defaults to "0".

`--allow-secret-key-import'
     This is an obsolete option and is not used anywhere.

`--allow-multisig-verification'
     Allow verification of concatenated signed messages. This will run a
     signature verification for each data+signature block. There are
     some security issues with this option and thus it is off by
     default. Note that versions of GPG prior to version 1.4.3
     implicitly allowed this.

`--enable-special-filenames'
     This options enables a mode in which filenames of the form `-&n',
     where n is a non-negative decimal number, refer to the file
     descriptor n and not to a file with that name.

`--no-expensive-trust-checks'
     Experimental use only.

`--preserve-permissions'
     Don't change the permissions of a secret keyring back to user
     read/write only. Use this option only if you really know what you
     are doing.

`--default-preference-list `string''
     Set the list of default preferences to `string'. This preference
     list is used for new keys and becomes the default for "setpref" in
     the edit menu.

`--default-keyserver-url `name''
     Set the default keyserver URL to `name'. This keyserver will be
     used as the keyserver URL when writing a new self-signature on a
     key, which includes key generation and changing preferences.

`--list-config'
     Display various internal configuration parameters of GnuPG. This
     option is intended for external programs that call GnuPG to
     perform tasks, and is thus not generally useful. See the file
     `doc/DETAILS' in the source distribution for the details of which
     configuration items may be listed. `--list-config' is only usable
     with `--with-colons' set.

`--gpgconf-list'
     This command is simliar to `--list-config' but in general only
     internally used by the `gpgconf' tool.

`--gpgconf-test'
     This is more or less dummy action.  However it parses the
     configuration file and returns with failure if the configuraion
     file would prevent `gpg' from startup.  Thus it may be used to run
     a syntax check on the configuration file.


1.2.7 Deprecated options
------------------------

`--load-extension `name''
     Load an extension module. If `name' does not contain a slash it is
     searched for in the directory configured when GnuPG was built
     (generally "/usr/local/lib/gnupg"). Extensions are not generally
     useful anymore, and the use of this option is deprecated.

`--show-photos'
`--no-show-photos'
     Causes `--list-keys', `--list-sigs', `--list-public-keys',
     `--list-secret-keys', and verifying a signature to also display
     the photo ID attached to the key, if any. See also
     `--photo-viewer'. These options are deprecated. Use
     `--list-options [no-]show-photos' and/or `--verify-options
     [no-]show-photos' instead.

`--show-keyring'
     Display the keyring name at the head of key listings to show which
     keyring a given key resides on. This option is deprecated: use
     `--list-options [no-]show-keyring' instead.

`--ctapi-driver `file''
     Use `file' to access the smartcard reader. The current default is
     `libtowitoko.so'. Note that the use of this interface is
     deprecated; it may be removed in future releases.

`--always-trust'
     Identical to `--trust-model always'. This option is deprecated.

`--show-notation'
`--no-show-notation'
     Show signature notations in the `--list-sigs' or `--check-sigs'
     listings as well as when verifying a signature with a notation in
     it. These options are deprecated. Use `--list-options
     [no-]show-notation' and/or `--verify-options [no-]show-notation'
     instead.

`--show-policy-url'
`--no-show-policy-url'
     Show policy URLs in the `--list-sigs' or `--check-sigs' listings
     as well as when verifying a signature with a policy URL in it.
     These options are deprecated. Use `--list-options
     [no-]show-policy-url' and/or `--verify-options
     [no-]show-policy-url' instead.



File: gnupg1.info,  Node: GPG Configuration,  Next: GPG Examples,  Prev: GPG Options,  Up: Invoking GPG

1.3 Configuration files
=======================

There are a few configuration files to control certain aspects of
`gpg''s operation. Unless noted, they are expected in the current home
directory (*note option --homedir::).

`gpg.conf'
     This is the standard configuration file read by `gpg' on startup.
     It may contain any valid long option; the leading two dashes may
     not be entered and the option may not be abbreviated.  This default
     name may be changed on the command line (*note option --options::).


   Note that on larger installations, it is useful to put predefined
files into the directory `/etc/skel/.gnupg/' so that newly created users
start up with a working configuration.

   For internal purposes `gpg' creates and maintaines a few other
files; They all live in in the current home directory (*note option
--homedir::).  Only the `gpg' may modify these files.

`~/.gnupg/secring.gpg'
     The secret keyring.

`~/.gnupg/secring.gpg.lock'
     and the lock file

`~/.gnupg/pubring.gpg'
     The public keyring

`~/.gnupg/pubring.gpg.lock'
     and the lock file

`~/.gnupg/trustdb.gpg'
     The trust database

`~/.gnupg/trustdb.gpg.lock'
     and the lock file

`~/.gnupg/random_seed'
     used to preserve the internal random pool

`/usr[/local]/share/gnupg/options.skel'
     Skeleton options file

`/usr[/local]/lib/gnupg/'
     Default location for extensions


   Operation is further controlled by a few environment variables:

HOME
     Used to locate the default home directory.

GNUPGHOME
     If set directory used instead of "~/.gnupg".

GPG_AGENT_INFO
     Used to locate the gpg-agent.  This is only honored when
     `--use-agent' is set.  The value consists of 3 colon delimited
     fields: The first is the path to the Unix Domain Socket, the
     second the PID of the gpg-agent and the protocol version which
     should be set to 1. When starting the gpg-agent as described in
     its documentation, this variable is set to the correct value. The
     option `--gpg-agent-info' can be used to override it.

COLUMNS
LINES
     Used to size some displays to the full size of the screen.



File: gnupg1.info,  Node: GPG Examples,  Prev: GPG Configuration,  Up: Invoking GPG

1.4 Examples
============

gpg -se -r `Bob' `file'
     sign and encrypt for user Bob

gpg -clearsign `file'
     make a clear text signature

gpg -sb `file'
     make a detached signature

gpg -list-keys `user_ID'
     show keys

gpg -fingerprint `user_ID'
     show fingerprint

gpg -verify `pgpfile'
gpg -verify `sigfile'
     Verify the signature of the file but do not output the data. The
     second form is used for detached signatures, where `sigfile' is
     the detached signature (either ASCII armored or binary) and are
     the signed data; if this is not given, the name of the file
     holding the signed data is constructed by cutting off the
     extension (".asc" or ".sig") of `sigfile' or by asking the user
     for the filename.

RETURN VALUE
************

The program returns 0 if everything was fine, 1 if at least a signature
was bad, and other error codes for fatal errors.

WARNINGS
********

Use a *good* password for your user account and a *good* passphrase to
protect your secret key. This passphrase is the weakest part of the
whole system. Programs to do dictionary attacks on your secret keyring
are very easy to write and so you should protect your "~/.gnupg/"
directory very well.

   Keep in mind that, if this program is used over a network (telnet),
it is *very* easy to spy out your passphrase!

   If you are going to verify detached signatures, make sure that the
program knows about it; either give both filenames on the command line
or use `-' to specify stdin.

INTEROPERABILITY WITH OTHER OPENPGP PROGRAMS
********************************************

GnuPG tries to be a very flexible implementation of the OpenPGP
standard. In particular, GnuPG implements many of the optional parts of
the standard, such as the SHA-512 hash, and the ZLIB and BZIP2
compression algorithms. It is important to be aware that not all
OpenPGP programs implement these optional algorithms and that by
forcing their use via the `--cipher-algo', `--digest-algo',
`--cert-digest-algo', or `--compress-algo' options in GnuPG, it is
possible to create a perfectly valid OpenPGP message, but one that
cannot be read by the intended recipient.

   There are dozens of variations of OpenPGP programs available, and
each supports a slightly different subset of these optional algorithms.
For example, until recently, no (unhacked) version of PGP supported the
BLOWFISH cipher algorithm. A message using BLOWFISH simply could not be
read by a PGP user. By default, GnuPG uses the standard OpenPGP
preferences system that will always do the right thing and create
messages that are usable by all recipients, regardless of which OpenPGP
program they use. Only override this safe default if you really know
what you are doing.

   If you absolutely must override the safe default, or if the
preferences on a given key are invalid for some reason, you are far
better off using the `--pgp6', `--pgp7', or `--pgp8' options. These
options are safe as they do not force any particular algorithms in
violation of OpenPGP, but rather reduce the available algorithms to a
"PGP-safe" list.

BUGS
****

On many systems this program should be installed as setuid(root). This
is necessary to lock memory pages. Locking memory pages prevents the
operating system from writing memory pages (which may contain
passphrases or other sensitive material) to disk. If you get no warning
message about insecure memory your operating system supports locking
without being root. The program drops root privileges as soon as locked
memory is allocated.


File: gnupg1.info,  Node: Specify a User ID,  Next: Copying,  Prev: Invoking GPG,  Up: Top

2 How to Specify a User Id
**************************

There are different ways to specify a user ID to GnuPG.  Some of them
are only valid for `gpg' others are only good for `gpgsm'.  Here is the
entire list of ways to specify a key:

   * By key Id.  This format is deduced from the length of the string
     and its content or `0x' prefix. The key Id of an X.509 certificate
     are the low 64 bits of its SHA-1 fingerprint.  The use of key Ids
     is just a shortcut, for all automated processing the fingerprint
     should be used.

     When using `gpg' an exclamation mark may be appended to force
     using the specified primary or secondary key and not to try and
     calculate which primary or secondary key to use.

     The last four lines of the example give the key ID in their long
     form as internally used by the OpenPGP protocol. You can see the
     long key ID using the option `--with-colons'.

          234567C4
          0F34E556E
          01347A56A
          0xAB123456

          234AABBCC34567C4
          0F323456784E56EAB
          01AB3FED1347A5612
          0x234AABBCC34567C4

   * By fingerprint.  This format is deduced from the length of the
     string and its content or the `0x' prefix.  Note, that only the 20
     byte version fingerprint is available with `gpgsm' (i.e. the SHA-1
     hash of the certificate).

     When using `gpg' an exclamation mark may be appended to force
     using the specified primary or secondary key and not to try and
     calculate which primary or secondary key to use.

     The best way to specify a key Id is by using the fingerprint.  This
     avoids any ambiguities in case that there are duplicated key IDs.

          1234343434343434C434343434343434
          123434343434343C3434343434343734349A3434
          0E12343434343434343434EAB3484343434343434
          0xE12343434343434343434EAB3484343434343434

     (`gpgsm' also accepts colons between each pair of hexadecimal
     digits because this is the de-facto standard on how to present
     X.509 fingerprints.)

   * By exact match on OpenPGP user ID.  This is denoted by a leading
     equal sign. It does not make sense for X.509 certificates.

          =Heinrich Heine <heinrichh@uni-duesseldorf.de>

   * By exact match on an email address.  This is indicated by
     enclosing the email address in the usual way with left and right
     angles.

          <heinrichh@uni-duesseldorf.de>

   * By word match.  All words must match exactly (not case sensitive)
     but can appear in any order in the user ID or a subjects name.
     Words are any sequences of letters, digits, the underscore and all
     characters with bit 7 set.

          +Heinrich Heine duesseldorf

   * By exact match on the subject's DN.  This is indicated by a
     leading slash, directly followed by the RFC-2253 encoded DN of the
     subject.  Note that you can't use the string printed by "gpgsm
     -list-keys" because that one as been reordered and modified for
     better readability; use -with-colons to print the raw (but standard
     escaped) RFC-2253 string

          /CN=Heinrich Heine,O=Poets,L=Paris,C=FR

   * By exact match on the issuer's DN.  This is indicated by a leading
     hash mark, directly followed by a slash and then directly followed
     by the rfc2253 encoded DN of the issuer.  This should return the
     Root cert of the issuer.  See note above.

          #/CN=Root Cert,O=Poets,L=Paris,C=FR

   * By exact match on serial number and issuer's DN.  This is
     indicated by a hash mark, followed by the hexadecmal
     representation of the serial number, the followed by a slash and
     the RFC-2253 encoded DN of the issuer. See note above.

          #4F03/CN=Root Cert,O=Poets,L=Paris,C=FR

   * By keygrip This is indicated by an ampersand followed by the 40
     hex digits of a keygrip.  `gpgsm' prints the keygrip when using
     the command `--dump-cert'.  It does not yet work for OpenPGP keys.

          &D75F22C3F86E355877348498CDC92BD21010A480

   * By substring match.  This is the default mode but applications may
     want to explicitly indicate this by putting the asterisk in front.
     Match is not case sensitive.

          Heine
          *Heine


   Please note that we have reused the hash mark identifier which was
used in old GnuPG versions to indicate the so called local-id.  It is
not anymore used and there should be no conflict when used with X.509
stuff.

   Using the RFC-2253 format of DNs has the drawback that it is not
possible to map them back to the original encoding, however we don't
have to do this because our key database stores this encoding as meta
data.


File: gnupg1.info,  Node: Copying,  Next: Option Index,  Prev: Specify a User ID,  Up: Top

Appendix A GNU GENERAL PUBLIC LICENSE
*************************************

                         Version 2, June 1991

     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

A.0.1 Preamble
--------------

The licenses for most software are designed to take away your freedom
to share and change it.  By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

   When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.

   To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

   For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

   We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

   Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

   Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

   The precise terms and conditions for copying, distribution and
modification follow.

    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
  1. This License applies to any program or other work which contains a
     notice placed by the copyright holder saying it may be distributed
     under the terms of this General Public License.  The "Program",
     below, refers to any such program or work, and a "work based on
     the Program" means either the Program or any derivative work under
     copyright law: that is to say, a work containing the Program or a
     portion of it, either verbatim or with modifications and/or
     translated into another language.  (Hereinafter, translation is
     included without limitation in the term "modification".)  Each
     licensee is addressed as "you".

     Activities other than copying, distribution and modification are
     not covered by this License; they are outside its scope.  The act
     of running the Program is not restricted, and the output from the
     Program is covered only if its contents constitute a work based on
     the Program (independent of having been made by running the
     Program).  Whether that is true depends on what the Program does.

  2. You may copy and distribute verbatim copies of the Program's
     source code as you receive it, in any medium, provided that you
     conspicuously and appropriately publish on each copy an appropriate
     copyright notice and disclaimer of warranty; keep intact all the
     notices that refer to this License and to the absence of any
     warranty; and give any other recipients of the Program a copy of
     this License along with the Program.

     You may charge a fee for the physical act of transferring a copy,
     and you may at your option offer warranty protection in exchange
     for a fee.

  3. You may modify your copy or copies of the Program or any portion
     of it, thus forming a work based on the Program, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

       a. You must cause the modified files to carry prominent notices
          stating that you changed the files and the date of any change.

       b. You must cause any work that you distribute or publish, that
          in whole or in part contains or is derived from the Program
          or any part thereof, to be licensed as a whole at no charge
          to all third parties under the terms of this License.

       c. If the modified program normally reads commands interactively
          when run, you must cause it, when started running for such
          interactive use in the most ordinary way, to print or display
          an announcement including an appropriate copyright notice and
          a notice that there is no warranty (or else, saying that you
          provide a warranty) and that users may redistribute the
          program under these conditions, and telling the user how to
          view a copy of this License.  (Exception: if the Program
          itself is interactive but does not normally print such an
          announcement, your work based on the Program is not required
          to print an announcement.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the
     Program, and can be reasonably considered independent and separate
     works in themselves, then this License, and its terms, do not
     apply to those sections when you distribute them as separate
     works.  But when you distribute the same sections as part of a
     whole which is a work based on the Program, the distribution of
     the whole must be on the terms of this License, whose permissions
     for other licensees extend to the entire whole, and thus to each
     and every part regardless of who wrote it.

     Thus, it is not the intent of this section to claim rights or
     contest your rights to work written entirely by you; rather, the
     intent is to exercise the right to control the distribution of
     derivative or collective works based on the Program.

     In addition, mere aggregation of another work not based on the
     Program with the Program (or with a work based on the Program) on
     a volume of a storage or distribution medium does not bring the
     other work under the scope of this License.

  4. You may copy and distribute the Program (or a work based on it,
     under Section 2) in object code or executable form under the terms
     of Sections 1 and 2 above provided that you also do one of the
     following:

       a. Accompany it with the complete corresponding machine-readable
          source code, which must be distributed under the terms of
          Sections 1 and 2 above on a medium customarily used for
          software interchange; or,

       b. Accompany it with a written offer, valid for at least three
          years, to give any third party, for a charge no more than your
          cost of physically performing source distribution, a complete
          machine-readable copy of the corresponding source code, to be
          distributed under the terms of Sections 1 and 2 above on a
          medium customarily used for software interchange; or,

       c. Accompany it with the information you received as to the offer
          to distribute corresponding source code.  (This alternative is
          allowed only for noncommercial distribution and only if you
          received the program in object code or executable form with
          such an offer, in accord with Subsection b above.)

     The source code for a work means the preferred form of the work for
     making modifications to it.  For an executable work, complete
     source code means all the source code for all modules it contains,
     plus any associated interface definition files, plus the scripts
     used to control compilation and installation of the executable.
     However, as a special exception, the source code distributed need
     not include anything that is normally distributed (in either
     source or binary form) with the major components (compiler,
     kernel, and so on) of the operating system on which the executable
     runs, unless that component itself accompanies the executable.

     If distribution of executable or object code is made by offering
     access to copy from a designated place, then offering equivalent
     access to copy the source code from the same place counts as
     distribution of the source code, even though third parties are not
     compelled to copy the source along with the object code.

  5. You may not copy, modify, sublicense, or distribute the Program
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense or distribute the Program is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

  6. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify
     or distribute the Program or its derivative works.  These actions
     are prohibited by law if you do not accept this License.
     Therefore, by modifying or distributing the Program (or any work
     based on the Program), you indicate your acceptance of this
     License to do so, and all its terms and conditions for copying,
     distributing or modifying the Program or works based on it.

  7. Each time you redistribute the Program (or any work based on the
     Program), the recipient automatically receives a license from the
     original licensor to copy, distribute or modify the Program
     subject to these terms and conditions.  You may not impose any
     further restrictions on the recipients' exercise of the rights
     granted herein.  You are not responsible for enforcing compliance
     by third parties to this License.

  8. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent
     issues), conditions are imposed on you (whether by court order,
     agreement or otherwise) that contradict the conditions of this
     License, they do not excuse you from the conditions of this
     License.  If you cannot distribute so as to satisfy simultaneously
     your obligations under this License and any other pertinent
     obligations, then as a consequence you may not distribute the
     Program at all.  For example, if a patent license would not permit
     royalty-free redistribution of the Program by all those who
     receive copies directly or indirectly through you, then the only
     way you could satisfy both it and this License would be to refrain
     entirely from distribution of the Program.

     If any portion of this section is held invalid or unenforceable
     under any particular circumstance, the balance of the section is
     intended to apply and the section as a whole is intended to apply
     in other circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of
     any such claims; this section has the sole purpose of protecting
     the integrity of the free software distribution system, which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is
     willing to distribute software through any other system and a
     licensee cannot impose that choice.

     This section is intended to make thoroughly clear what is believed
     to be a consequence of the rest of this License.

  9. If the distribution and/or use of the Program is restricted in
     certain countries either by patents or by copyrighted interfaces,
     the original copyright holder who places the Program under this
     License may add an explicit geographical distribution limitation
     excluding those countries, so that distribution is permitted only
     in or among countries not thus excluded.  In such case, this
     License incorporates the limitation as if written in the body of
     this License.

 10. The Free Software Foundation may publish revised and/or new
     versions of the General Public License from time to time.  Such
     new versions will be similar in spirit to the present version, but
     may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the
     Program specifies a version number of this License which applies
     to it and "any later version", you have the option of following
     the terms and conditions either of that version or of any later
     version published by the Free Software Foundation.  If the Program
     does not specify a version number of this License, you may choose
     any version ever published by the Free Software Foundation.

 11. If you wish to incorporate parts of the Program into other free
     programs whose distribution conditions are different, write to the
     author to ask for permission.  For software which is copyrighted
     by the Free Software Foundation, write to the Free Software
     Foundation; we sometimes make exceptions for this.  Our decision
     will be guided by the two goals of preserving the free status of
     all derivatives of our free software and of promoting the sharing
     and reuse of software generally.

                                NO WARRANTY
 12. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
     LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
     HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
     WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
     NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE
     QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
     PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
     SERVICING, REPAIR OR CORRECTION.

 13. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
     MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
     LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
     INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
     INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
     DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
     OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
     OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

                      END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
=============================================

If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.

   To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

     ONE LINE TO GIVE THE PROGRAM'S NAME AND AN IDEA OF WHAT IT DOES.
     Copyright (C) 19YY  NAME OF AUTHOR

     This program is free software; you can redistribute it and/or
     modify it under the terms of the GNU General Public License
     as published by the Free Software Foundation; either version 2
     of the License, or (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License along
     with this program; if not, write to the Free Software Foundation, Inc.,
     51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.

   Also add information on how to contact you by electronic and paper
mail.

   If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:

     Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
     type `show w'.  This is free software, and you are welcome
     to redistribute it under certain conditions; type `show c'
     for details.

   The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License.  Of course, the
commands you use may be called something other than `show w' and `show
c'; they could even be mouse-clicks or menu items--whatever suits your
program.

   You should also get your employer (if you work as a programmer) or
your school, if any, to sign a "copyright disclaimer" for the program,
if necessary.  Here is a sample; alter the names:

     Yoyodyne, Inc., hereby disclaims all copyright
     interest in the program `Gnomovision'
     (which makes passes at compilers) written
     by James Hacker.

     SIGNATURE OF TY COON, 1 April 1989
     Ty Coon, President of Vice

   This General Public License does not permit incorporating your
program into proprietary programs.  If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library.  If this is what you want to do, use the
GNU Library General Public License instead of this License.


File: gnupg1.info,  Node: Option Index,  Next: Index,  Prev: Copying,  Up: Top

Option Index
************

[index]
* Menu:

* --enarmor:                             Operational GPG Commands.
                                                              (line 283)
* armor:                                 GPG Input and Output.
                                                              (line   8)
* card-edit:                             Operational GPG Commands.
                                                              (line 137)
* card-status:                           Operational GPG Commands.
                                                              (line 143)
* change-pin:                            Operational GPG Commands.
                                                              (line 146)
* check-sigs:                            Operational GPG Commands.
                                                              (line 123)
* check-trustdb:                         Operational GPG Commands.
                                                              (line 236)
* clearsign:                             Operational GPG Commands.
                                                              (line  15)
* debug:                                 GPG Esoteric Options.
                                                              (line  22)
* decrypt:                               Operational GPG Commands.
                                                              (line  48)
* decrypt-files:                         Operational GPG Commands.
                                                              (line  83)
* default-key:                           GPG Configuration Options.
                                                              (line  10)
* default-keyserver-url:                 GPG Esoteric Options.
                                                              (line 417)
* default-preference-list:               GPG Esoteric Options.
                                                              (line 412)
* default-recipient:                     GPG Configuration Options.
                                                              (line  15)
* default-recipient-self:                GPG Configuration Options.
                                                              (line  19)
* delete-key:                            Operational GPG Commands.
                                                              (line 151)
* delete-secret-and-public-key:          Operational GPG Commands.
                                                              (line 160)
* delete-secret-key:                     Operational GPG Commands.
                                                              (line 156)
* desig-revoke:                          OpenPGP Key Management.
                                                              (line  21)
* detach-sign:                           Operational GPG Commands.
                                                              (line  23)
* dry-run:                               GPG Esoteric Options.
                                                              (line   8)
* dump-options:                          General GPG Commands.
                                                              (line  19)
* edit-key:                              OpenPGP Key Management.
                                                              (line  26)
* enarmor:                               Operational GPG Commands.
                                                              (line 283)
* encrypt:                               Operational GPG Commands.
                                                              (line  27)
* encrypt-files:                         Operational GPG Commands.
                                                              (line  80)
* export:                                Operational GPG Commands.
                                                              (line 165)
* export-ownertrust:                     Operational GPG Commands.
                                                              (line 251)
* export-secret-keys:                    Operational GPG Commands.
                                                              (line 180)
* export-secret-subkeys:                 Operational GPG Commands.
                                                              (line 180)
* fetch-keys:                            Operational GPG Commands.
                                                              (line 221)
* fingerprint:                           Operational GPG Commands.
                                                              (line 126)
* fixed-list-mode:                       GPG Input and Output.
                                                              (line 117)
* gen-key:                               OpenPGP Key Management.
                                                              (line   9)
* gen-prime:                             Operational GPG Commands.
                                                              (line 277)
* gen-random:                            Operational GPG Commands.
                                                              (line 271)
* gen-revoke:                            OpenPGP Key Management.
                                                              (line  17)
* gnupg:                                 OpenPGP Options.     (line 110)
* gpgconf-list:                          GPG Esoteric Options.
                                                              (line 430)
* gpgconf-test:                          GPG Esoteric Options.
                                                              (line 434)
* help:                                  General GPG Commands.
                                                              (line  12)
* hidden-recipient:                      GPG Key related Options.
                                                              (line  14)
* homedir:                               GPG Configuration Options.
                                                              (line 191)
* import:                                Operational GPG Commands.
                                                              (line 190)
* import-ownertrust:                     Operational GPG Commands.
                                                              (line 256)
* interactive:                           GPG Esoteric Options.
                                                              (line  19)
* keyedit:addcardkey:                    OpenPGP Key Management.
                                                              (line  97)
* keyedit:addkey:                        OpenPGP Key Management.
                                                              (line  94)
* keyedit:addphoto:                      OpenPGP Key Management.
                                                              (line  74)
* keyedit:addrevoker:                    OpenPGP Key Management.
                                                              (line 127)
* keyedit:adduid:                        OpenPGP Key Management.
                                                              (line  71)
* keyedit:bkuptocard:                    OpenPGP Key Management.
                                                              (line 111)
* keyedit:check:                         OpenPGP Key Management.
                                                              (line 159)
* keyedit:clean:                         OpenPGP Key Management.
                                                              (line 207)
* keyedit:cross-certify:                 OpenPGP Key Management.
                                                              (line 221)
* keyedit:delkey:                        OpenPGP Key Management.
                                                              (line 122)
* keyedit:delsig:                        OpenPGP Key Management.
                                                              (line  86)
* keyedit:deluid:                        OpenPGP Key Management.
                                                              (line  81)
* keyedit:disable:                       OpenPGP Key Management.
                                                              (line  67)
* keyedit:enable:                        OpenPGP Key Management.
                                                              (line  67)
* keyedit:expire:                        OpenPGP Key Management.
                                                              (line 135)
* keyedit:key:                           OpenPGP Key Management.
                                                              (line 155)
* keyedit:keyserver:                     OpenPGP Key Management.
                                                              (line 189)
* keyedit:keytocard:                     OpenPGP Key Management.
                                                              (line 100)
* keyedit:lsign:                         OpenPGP Key Management.
                                                              (line  38)
* keyedit:minimize:                      OpenPGP Key Management.
                                                              (line 216)
* keyedit:notation:                      OpenPGP Key Management.
                                                              (line 196)
* keyedit:nrsign:                        OpenPGP Key Management.
                                                              (line  43)
* keyedit:passwd:                        OpenPGP Key Management.
                                                              (line 140)
* keyedit:pref:                          OpenPGP Key Management.
                                                              (line 165)
* keyedit:primary:                       OpenPGP Key Management.
                                                              (line 143)
* keyedit:quit:                          OpenPGP Key Management.
                                                              (line 230)
* keyedit:revkey:                        OpenPGP Key Management.
                                                              (line 132)
* keyedit:revsig:                        OpenPGP Key Management.
                                                              (line  57)
* keyedit:revuid:                        OpenPGP Key Management.
                                                              (line  91)
* keyedit:save:                          OpenPGP Key Management.
                                                              (line 227)
* keyedit:setpref:                       OpenPGP Key Management.
                                                              (line 177)
* keyedit:showphoto:                     OpenPGP Key Management.
                                                              (line 162)
* keyedit:showpref:                      OpenPGP Key Management.
                                                              (line 169)
* keyedit:sign:                          OpenPGP Key Management.
                                                              (line  31)
* keyedit:toggle:                        OpenPGP Key Management.
                                                              (line 204)
* keyedit:trust:                         OpenPGP Key Management.
                                                              (line  62)
* keyedit:tsign:                         OpenPGP Key Management.
                                                              (line  47)
* keyedit:uid:                           OpenPGP Key Management.
                                                              (line 151)
* list-config:                           GPG Esoteric Options.
                                                              (line 422)
* list-keys:                             Operational GPG Commands.
                                                              (line  88)
* list-options:                          GPG Configuration Options.
                                                              (line  38)
* list-options:show-notations:           GPG Configuration Options.
                                                              (line  57)
* list-options:show-photos:              GPG Configuration Options.
                                                              (line  46)
* list-options:show-policy-urls:         GPG Configuration Options.
                                                              (line  51)
* list-options:show-std-notations:       GPG Configuration Options.
                                                              (line  57)
* list-options:show-user-notations:      GPG Configuration Options.
                                                              (line  57)
* list-packets:                          Operational GPG Commands.
                                                              (line 133)
* list-secret-keys:                      Operational GPG Commands.
                                                              (line 101)
* list-sigs:                             Operational GPG Commands.
                                                              (line 107)
* local-user:                            GPG Key related Options.
                                                              (line  63)
* lsign-key:                             OpenPGP Key Management.
                                                              (line 265)
* mangle-dos-filenames:                  GPG Configuration Options.
                                                              (line 282)
* max-output:                            GPG Input and Output.
                                                              (line  19)
* multifile:                             Operational GPG Commands.
                                                              (line  69)
* no-default-recipient:                  GPG Configuration Options.
                                                              (line  25)
* no-mangle-dos-filenames:               GPG Configuration Options.
                                                              (line 282)
* no-verbose:                            GPG Configuration Options.
                                                              (line  32)
* openpgp:                               OpenPGP Options.     (line 118)
* output:                                GPG Input and Output.
                                                              (line  16)
* pgp2:                                  OpenPGP Options.     (line 133)
* pgp6:                                  OpenPGP Options.     (line 147)
* pgp7:                                  OpenPGP Options.     (line 158)
* pgp8:                                  OpenPGP Options.     (line 164)
* print-md:                              Operational GPG Commands.
                                                              (line 266)
* quiet:                                 GPG Configuration Options.
                                                              (line  35)
* rebuild-keydb-caches:                  Operational GPG Commands.
                                                              (line 260)
* recipient:                             GPG Key related Options.
                                                              (line   8)
* recv-keys:                             Operational GPG Commands.
                                                              (line 199)
* refresh-keys:                          Operational GPG Commands.
                                                              (line 203)
* rfc1991:                               OpenPGP Options.     (line 130)
* rfc2440:                               OpenPGP Options.     (line 125)
* search-keys:                           Operational GPG Commands.
                                                              (line 212)
* send-keys:                             Operational GPG Commands.
                                                              (line 172)
* sign:                                  Operational GPG Commands.
                                                              (line   8)
* sign-key:                              OpenPGP Key Management.
                                                              (line 261)
* store:                                 Operational GPG Commands.
                                                              (line  44)
* symmetric:                             Operational GPG Commands.
                                                              (line  35)
* update-trustdb:                        Operational GPG Commands.
                                                              (line 226)
* verbose:                               GPG Configuration Options.
                                                              (line  28)
* verify:                                Operational GPG Commands.
                                                              (line  56)
* verify-files:                          Operational GPG Commands.
                                                              (line  77)
* version:                               General GPG Commands.
                                                              (line   7)
* warranty:                              General GPG Commands.
                                                              (line  16)
* with-colons:                           GPG Input and Output.
                                                              (line 109)
* with-fingerprint:                      GPG Input and Output.
                                                              (line 121)


File: gnupg1.info,  Node: Index,  Prev: Option Index,  Up: Top

Index
*****

[index]
* Menu:

* command options:                       Invoking GPG.         (line  6)
* GPG command options:                   Invoking GPG.         (line  6)
* gpgsm.conf:                            GPG Configuration.    (line 11)
* GPL, GNU General Public License:       Copying.              (line  6)
* options, GPG command:                  Invoking GPG.         (line  6)



Tag Table:
Node: Top717
Node: Invoking GPG1760
Node: GPG Commands2536
Node: General GPG Commands3367
Node: Operational GPG Commands3998
Node: OpenPGP Key Management16542
Node: GPG Options26994
Node: GPG Configuration Options28224
Ref: option --homedir35706
Ref: option --options38256
Node: GPG Key related Options56255
Node: GPG Input and Output59254
Node: OpenPGP Options64663
Node: GPG Esoteric Options72453
Node: GPG Configuration93827
Node: GPG Examples96077
Node: Specify a User ID99709
Ref: how-to-specify-a-user-id99858
Node: Copying104479
Node: Option Index123693
Node: Index141621

End Tag Table