| 93
|
|
[ Colin Watson ]
* Resynchronise with Debian experimental. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Program vesafb on BIOS systems rather than efifb.
- Add a grub-rescue-efi-amd64 package containing a rescue CD-ROM image
for EFI-AMD64.
- On Wubi, don't ask for an install device, but just update wubildr
using the diverted grub-install.
- When embedding the core image in a post-MBR gap, check for and avoid
sectors matching any of a list of known signatures.
- Disable video_bochs and video_cirrus on PC BIOS systems, as probing
PCI space seems to break on some systems.
- Downgrade "ACPI shutdown failed" error to a debug message, since it
can cause spurious test failures.
- Put second and subsequent Linux menu entries in a submenu.
* Add a background_color command.
* Disable lua enum_pci on ieee1275 platforms, where <grub/cpu/pci.h> isn't
available.
* Add preferred resolution detection for VBE. GRUB_GFXMODE now defaults
to "auto".
* Set an aubergine background, and set vt.handoff=7 for as smooth a
handoff as possible to kernel graphical mode (LP: #386047).
[ Mario Limonciello ]
* grub-mkrescue efi amd64 images:
When searching for .disk/info, set the 'root' parameter as the regular
search requires the variable being set as an argument.
|
Colin Watson |
1.99~20101210-1ubuntu1 |
13 years ago
|
 |
|
| 92
|
|
|
Colin Watson |
1.99~20101126-1ubuntu3 |
13 years ago
|
|
|
| 91
|
|
|
Evan Broder |
1.99~20101126-1ubuntu2 |
13 years ago
|
|
|
| 90
|
|
* Resynchronise with Debian experimental. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Program vesafb on BIOS systems rather than efifb.
- Add a grub-rescue-efi-amd64 package containing a rescue CD-ROM image
for EFI-AMD64.
- On Wubi, don't ask for an install device, but just update wubildr
using the diverted grub-install.
- When embedding the core image in a post-MBR gap, check for and avoid
sectors matching any of a list of known signatures.
- Disable video_bochs and video_cirrus on PC BIOS systems, as probing
PCI space seems to break on some systems.
- Downgrade "ACPI shutdown failed" error to a debug message, since it
can cause spurious test failures.
* Put second and subsequent Linux menu entries in a submenu (LP: #540452).
* Don't check the device abstraction before probing all devices, and
restore the normal reinitialisation of LVM and RAID in grub-probe; this
broke RAID probing when a device map exists (LP: #681535).
|
Colin Watson |
1.99~20101126-1ubuntu1 |
13 years ago
|
|
|
| 89
|
|
[ Colin Watson ]
* Resynchronise with Debian experimental. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Program vesafb on BIOS systems rather than efifb.
- Add a grub-rescue-efi-amd64 package containing a rescue CD-ROM image
for EFI-AMD64.
- On Wubi, don't ask for an install device, but just update wubildr
using the diverted grub-install.
- When embedding the core image in a post-MBR gap, check for and avoid
sectors matching any of a list of known signatures.
- Disable video_bochs and video_cirrus on PC BIOS systems, as probing
PCI space seems to break on some systems.
* Downgrade "ACPI shutdown failed" error to a debug message, since it can
cause spurious test failures.
[ Evan Broder ]
* Enable lua from grub-extras.
* Incorporate the bitop library into lua.
* Add enum_pci function to grub module in lua.
* Switch back to gfxpayload=keep by default, unless the video hardware
is known to not support it.
[ Mario Limonciello ]
* Built part_msdos and vfat into bootx64.efi (LP: #677758)
|
Colin Watson |
1.99~20101124-1ubuntu1 |
13 years ago
|
|
|
| 88
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
- Program vesafb on BIOS systems rather than efifb.
- Add a grub-rescue-efi-amd64 package containing a rescue CD-ROM image
for EFI-AMD64.
- Extend EFI initialisation code to understand (,$partition)-style
prefixes. If the EFI System Partition is on the same disk as
/boot/grub, use this rather than allowing GRUB to set the prefix to
the EFI System Partition by default.
- Handle partition devices without corresponding disk devices.
- On Wubi, don't ask for an install device, but just update wubildr
using the diverted grub-install.
- When embedding the core image in a post-MBR gap, check for and avoid
sectors matching any of a list of known signatures.
- Disable video_bochs and video_cirrus on PC BIOS systems, as probing
PCI space seems to break on some systems.
|
Colin Watson |
1.98+20100804-7ubuntu1 |
13 years ago
|
|
|
| 87
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
- Program vesafb on BIOS systems rather than efifb.
- Add a grub-rescue-efi-amd64 package containing a rescue CD-ROM image
for EFI-AMD64.
- Extend EFI initialisation code to understand (,$partition)-style
prefixes. If the EFI System Partition is on the same disk as
/boot/grub, use this rather than allowing GRUB to set the prefix to
the EFI System Partition by default.
- Handle partition devices without corresponding disk devices.
- On Wubi, don't ask for an install device, but just update wubildr
using the diverted grub-install.
- When embedding the core image in a post-MBR gap, check for and avoid
sectors matching any of a list of known signatures.
- Disable video_bochs and video_cirrus on PC BIOS systems, as probing
PCI space seems to break on some systems.
|
Colin Watson |
1.98+20100804-6ubuntu1 |
13 years ago
|
|
|
| 86
|
|
|
Colin Watson |
1.98+20100804-5ubuntu3 |
13 years ago
|
|
|
| 85
|
|
|
Colin Watson |
1.98+20100804-5ubuntu2 |
13 years ago
|
|
|
| 84
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
- Program vesafb on BIOS systems rather than efifb.
- Add a grub-rescue-efi-amd64 package containing a rescue CD-ROM image
for EFI-AMD64.
- Extend EFI initialisation code to understand (,$partition)-style
prefixes. If the EFI System Partition is on the same disk as
/boot/grub, use this rather than allowing GRUB to set the prefix to
the EFI System Partition by default.
- Handle partition devices without corresponding disk devices.
* Extend ubuntu_linux_no_loopmount.patch to ignore devices loop-mounted
from files in /etc/grub.d/20_linux_xen as well as /etc/grub.d/10_linux,
quelling a warning message on Wubi.
* On Wubi, don't ask for an install device, but just update wubildr using
the diverted grub-install (LP: #581760).
|
Colin Watson |
1.98+20100804-5ubuntu1 |
13 years ago
|
|
|
| 83
|
|
|
Colin Watson |
1.98+20100804-4ubuntu6 |
13 years ago
|
|
|
| 82
|
|
|
Colin Watson |
1.98+20100804-4ubuntu5 |
13 years ago
|
|
|
| 81
|
|
|
Colin Watson |
1.98+20100804-4ubuntu4 |
13 years ago
|
|
|
| 80
|
|
|
Colin Watson |
1.98+20100804-4ubuntu3 |
13 years ago
|
|
|
| 79
|
|
|
Colin Watson |
1.98+20100804-4ubuntu2 |
13 years ago
|
|
|
| 78
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
- Program vesafb on BIOS systems rather than efifb.
* Go back to gfxpayload=text by default for Ubuntu 10.10, as the kernel
needs more work to avoid lockups with some video cards
(LP: #605614, #608429, #612626).
|
Colin Watson |
1.98+20100804-4ubuntu1 |
13 years ago
|
|
|
| 77
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
- Program vesafb on BIOS systems rather than efifb, and return to
enabling gfxpayload=keep by default if the kernel has the necessary
support built-in.
|
Colin Watson |
1.98+20100722-1ubuntu1 |
13 years ago
|
|
|
| 76
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- grub-common Breaks: lupin-support (<< 0.30) due to a grub-mkimage
syntax change.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
- Program vesafb on BIOS systems rather than efifb, and return to
enabling gfxpayload=keep by default if the kernel has the necessary
support built-in.
|
Colin Watson |
1.98+20100720-1ubuntu1 |
13 years ago
|
|
|
| 75
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Keep the loopback file open so that subsequent changes to the "root"
environment variable don't affect it.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Change priority to optional to match the priority of grub.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- grub-common Breaks: lupin-support (<< 0.30) due to a grub-mkimage
syntax change.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
* Canonicalise device paths when building a device map on the fly.
* Program vesafb on BIOS systems rather than efifb, and return to enabling
gfxpayload=keep by default if the kernel has the necessary support
built-in.
|
Colin Watson |
1.98+20100710-1ubuntu1 |
13 years ago
|
|
|
| 74
|
|
* Resynchronise with Debian. Remaining changes:
- Adjust for default Ubuntu boot options ("quiet splash").
- Default to hiding the menu; holding down Shift at boot will show it.
- Set a monochromatic theme for Ubuntu.
- Apply Ubuntu GRUB Legacy changes to legacy update-grub script: title,
recovery mode, quiet option, tweak how memtest86+ is displayed, and
use UUIDs where appropriate.
- Fix backslash-escaping in merge_debconf_into_conf.
- Remove "GNU/Linux" from default distributor string.
- Add crashkernel= options if kdump and makedumpfile are available.
- If other operating systems are installed, then automatically unhide
the menu. Otherwise, if GRUB_HIDDEN_TIMEOUT is 0, then use keystatus
if available to check whether Shift is pressed. If it is, show the
menu, otherwise boot immediately. If keystatus is not available, then
fall back to a short delay interruptible with Escape.
- Allow Shift to interrupt 'sleep --interruptible'.
- Don't display introductory message about line editing unless we're
actually offering a shell prompt. Don't clear the screen just before
booting if we never drew the menu in the first place.
- Remove some verbose messages printed before reading the configuration
file.
- Suppress progress messages as the kernel and initrd load for
non-recovery kernel menu entries.
- Keep the loopback file open so that subsequent changes to the "root"
environment variable don't affect it.
- Change prepare_grub_to_access_device to handle filesystems
loop-mounted on file images.
- Ignore devices loop-mounted from files in 10_linux.
- Show the boot menu if the previous boot failed, that is if it failed
to get to the end of one of the normal runlevels.
- Handle RAID devices containing virtio components.
- Don't generate /boot/grub/device.map during grub-install or
grub-mkconfig by default.
- Adjust upgrade version checks for Ubuntu.
- Change priority to optional to match the priority of grub.
- Don't display "GRUB loading" unless Shift is held down.
- Adjust versions of grub-doc and grub-legacy-doc conflicts to tolerate
our backport of the grub-doc split.
- Fix LVM/RAID probing in the absence of /boot/grub/device.map.
- Look for .mo files in /usr/share/locale-langpack as well, in
preference.
- Make sure GRUB_TIMEOUT isn't quoted unnecessarily.
- Probe all devices in 'grub-probe --target=drive' if
/boot/grub/device.map is missing.
- Adjust hostdisk id for hard disks, allowing grub-setup to use its
standard workaround for broken BIOSes.
- grub-common Breaks: lupin-support (<< 0.30) due to a grub-mkimage
syntax change.
- Build-depend on qemu-kvm rather than qemu-system for grub-pc tests.
- Use qemu rather than qemu-system-i386.
- Extend the EFI version of grub-install to be able to install into an
EFI System Partition mounted on /boot/efi in a location that complies
with the EFI specification.
- Upgrade the installed core image when upgrading grub-efi-ia32 or
grub-efi-amd64, although only if /boot/efi/EFI/ubuntu already exists.
- Make grub-efi-ia32 and grub-efi-amd64 depend on efibootmgr so that
grub-install works properly.
|
Colin Watson |
1.98+20100705-1ubuntu1 |
13 years ago
|
|
|
collapse all