~ubuntu-branches/ubuntu/quantal/kde-l10n-zhtw/quantal

# translation of kig.po to Chinese Traditional
# Copyright (C) 2003, 2006, 2007, 2008 Free Software Foundation, Inc.
#
# Justin Fang <justin_fang@msn.com>, 2003.
# Yonghui Tao <taoyh@msn.com>, 2004.
# Frank Weng (a.k.a. Franklin) <franklin at goodhorse dot idv dot tw>, 2006, 2008, 2009.
# Franklin Weng <franklin at goodhorse dot idv dot tw>, 2007, 2008.
# Frank Weng (a.k.a. Franklin) <franklin@goodhorse.idv.tw>, 2010.
# Franklin Weng <franklin@mail.everfocus.com.tw>, 2010, 2012.
# Franklin Weng <franklin@goodhorse.idv.tw>, 2011.
msgid ""
msgstr ""
"Project-Id-Version: kig\n"
"Report-Msgid-Bugs-To: http://bugs.kde.org\n"
"POT-Creation-Date: 2012-07-20 04:42+0200\n"
"PO-Revision-Date: 2012-03-01 08:41+0800\n"
"Last-Translator: Franklin Weng <franklin@mail.everfocus.com.tw>\n"
"Language-Team: Chinese Traditional <zh-l10n@linux.org.tw>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Lokalize 1.2\n"
"Plural-Forms: nplurals=1; plural=0;\n"

msgctxt "NAME OF TRANSLATORS"
msgid "Your names"
msgstr ""
"簡體中文：開源軟件國際化簡體中文組(http://i18n.linux.net.cn),陶勇慧\n"
"繁體中文轉換與修改：Frank Weng (a.k.a. Franklin)"

msgctxt "EMAIL OF TRANSLATORS"
msgid "Your emails"
msgstr ""
"http://i18n.linux.net.cn,taoyh@msn.com, franklin at goodhorse dot idv dot tw"

msgid "Circle by Center && Line"
msgstr "由圓心和切線決定圓"

msgid "A circle constructed by its center and tangent to a given line"
msgstr "由圓心與給定切線來建構圓"

msgid "Construct a circle tangent to this line"
msgstr "建構與此線相切的圓"

msgid "Select the line that the new circle should be tangent to..."
msgstr "選取要與新的圓相切的線..."

msgid "Circle by Point && Segment (as the Diameter)"
msgstr "由圓心和直徑決定圓"

msgid ""
"A circle defined by its center and the length of a segment as the diameter"
msgstr "由圓心及某線段長度做為直徑來建構圓"

msgid ""
"Construct a circle with the diameter given by the length of this segment"
msgstr "建構以此線段長度做為直徑的圓"

msgid "Select the segment whose length gives the diameter of the new circle..."
msgstr "選擇要建構新圓參考直徑的線段..."

msgid "Equilateral Triangle"
msgstr "等邊三角形"

msgid "Equilateral triangle with given two vertices"
msgstr "兩個頂點決定的等邊三角形"

msgid "Evolute"
msgstr "漸屈線"

msgid "Evolute of a curve"
msgstr "曲線的漸屈線"

msgid "Evolute of this curve"
msgstr "此曲線的漸屈線"

msgid "Osculating Circle"
msgstr "密切圓"

msgid "Osculating circle of a curve at a point"
msgstr "曲線於一點的密切圓"

msgid "Osculating circle of this curve"
msgstr "此曲線的密切圓"

msgid "Osculating circle at this point"
msgstr "於此點的密切圓"

msgid "Select the point..."
msgstr "選擇點..."

msgid "Segment Axis"
msgstr "垂直平分線"

msgid "The perpendicular line through a given segment's mid point."
msgstr "垂直通過給定線段的中點的線（垂直平分線）。"

msgid "Construct the axis of this segment"
msgstr "建構線段的垂直平分線"

msgid "Select the segment of which you want to draw the axis..."
msgstr "選擇您想要繪製垂直平分線的線段..."

msgid "Square"
msgstr "正方形"

msgid "Square with two given adjacent vertices"
msgstr "由兩個相鄰頂點決定正方形"

msgid "Vector Difference"
msgstr "向量差"

msgid "Construct the vector difference of two vectors."
msgstr "建構兩個向量的差。"

msgid "Construct the vector difference of this vector and another one."
msgstr "建構此向量和另外一個向量的差。"

msgid "Construct the vector difference of the other vector and this one."
msgstr "建構另外一個向量和此向量的差。"

msgid "Construct the vector difference starting at this point."
msgstr "建構向量差的起點。"

msgid ""
"Select the first of the two vectors of which you want to construct the "
"difference..."
msgstr "選擇您想要建構向量差的兩個向量中的第一個..."

msgid ""
"Select the other of the two vectors of which you want to construct the "
"difference..."
msgstr "選擇您想要建構向量差的兩個向量中的另外一個..."

msgid "Select the point to construct the difference vector in..."
msgstr "選擇所建構向量差的起點..."

#: filters/asyexporter.cc:40
msgid "Export to &Asymptote..."
msgstr "匯出到 Asymptote(&A)..."

#: filters/asyexporter.cc:45
msgid "&Asymptote..."
msgstr "Asymptote(&A)..."

#: filters/asyexporter.cc:56
msgid "*.asy|Asymptote Documents (*.asy)"
msgstr "*.asy|Asymptote 文件 (*.asy)"

#: filters/asyexporter.cc:57
msgid "Export as Asymptote script"
msgstr "匯出為 Asymptote 文稿"

#: filters/asyexporter.cc:58
msgid "Asymptote Options"
msgstr "Asymptote 選項"

#: filters/asyexporter.cc:78 filters/exporter.cc:119
#: filters/latexexporter.cc:576 filters/svgexporter.cc:81
#: filters/xfigexporter.cc:592
#, kde-format
msgid ""
"The file \"%1\" could not be opened. Please check if the file permissions "
"are set correctly."
msgstr "檔案 %1 無法開啟。請檢查檔案權限是否設定正確。"

#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
#: filters/asyexporteroptionswidget.ui:22
#: filters/imageexporteroptionswidget.ui:120
#: filters/latexexporteroptionswidget.ui:82
#: filters/svgexporteroptionswidget.ui:22 misc/kigfiledialog.cc:34
msgid "Options"
msgstr "選項"

#. i18n: ectx: property (text), widget (QCheckBox, showFrameCheckBox)
#: filters/asyexporteroptionswidget.ui:42
#: filters/latexexporteroptionswidget.ui:95
msgid "Show Extra Frame"
msgstr "顯示額外框架"

#. i18n: ectx: property (text), widget (QCheckBox, showAxesCheckBox)
#: filters/asyexporteroptionswidget.ui:49
#: filters/imageexporteroptionswidget.ui:140
#: filters/latexexporteroptionswidget.ui:102
#: filters/svgexporteroptionswidget.ui:42
msgid "Show Axes"
msgstr "顯示座標軸"

#. i18n: ectx: property (text), widget (QCheckBox, showGridCheckBox)
#: filters/asyexporteroptionswidget.ui:56
#: filters/imageexporteroptionswidget.ui:147
#: filters/latexexporteroptionswidget.ui:88
#: filters/svgexporteroptionswidget.ui:49
msgid "Show Grid"
msgstr "顯示格線"

#: filters/cabri-filter.cc:157
msgid "This is an XFig file, not a Cabri figure."
msgstr "這是一個 XFig 檔，而非 Cabri 圖形。"

#: filters/cabri-filter.cc:202
#, kde-format
msgid ""
"This Cabri version (%1) is not supported yet.\n"
"Please contact the Kig authors to help supporting this Cabri version."
msgstr ""
"目前尚未支援這個 Cabri 的版本（%1）。\n"
"請與 Kig 作者群聯繫，以便加入此版本的支援。"

#: filters/cabri-filter.cc:659
#, kde-format
msgid ""
"This Cabri file contains a \"%1\" object, which Kig does not currently "
"support."
msgstr "此 Cabri 檔案包含 %1 物件，Kig 現在不支援。"

#: filters/cabri-utils.cc:33 filters/filter.h:55 misc/object_hierarchy.cc:486
#: objects/object_imp_factory.cc:294
#, kde-format
msgid "An error was encountered at line %1 in file %2."
msgstr "在檔案 %2 的第 %1 行遇到一個錯誤。"

#: filters/drgeo-filter.cc:109
#, kde-format
msgid "The Dr. Geo file \"%1\" is a macro file so it contains no figures."
msgstr "Dr. Geo 檔案 %1 是巨集檔案，其中不包含圖形。"

#: filters/drgeo-filter.cc:112
#, kde-format
msgid "There are no figures in Dr. Geo file \"%1\"."
msgstr "Dr.Geo 檔案 %1 中沒有圖形。"

#: filters/drgeo-filter.cc:128
msgid "Dr. Geo Filter"
msgstr "Dr. Geo 過濾器"

#: filters/drgeo-filter.cc:129
msgid ""
"The current Dr. Geo file contains more than one figure.\n"
"Please select which to import:"
msgstr ""
"目前的 Dr. Geo 檔案中包含了一個以上的圖形。\n"
"請選擇要匯入的圖形："

#: filters/drgeo-filter.cc:339 filters/drgeo-filter.cc:397
#: filters/drgeo-filter.cc:429 filters/drgeo-filter.cc:442
#: filters/drgeo-filter.cc:465 filters/drgeo-filter.cc:481
#: filters/drgeo-filter.cc:504 filters/drgeo-filter.cc:631
#: filters/drgeo-filter.cc:649 filters/drgeo-filter.cc:690
#: filters/drgeo-filter.cc:702 filters/drgeo-filter.cc:722
#, kde-format
msgid ""
"This Dr. Geo file contains a \"%1 %2\" object, which Kig does not currently "
"support."
msgstr "此 Dr. Geo 檔案包含一個 %1 %2 物件，Kig 現在不支援。"

#: filters/drgeo-filter.cc:376
msgid ""
"This Dr. Geo file contains an intersection type, which Kig does not "
"currently support."
msgstr "此 Dr. Geo 檔案包含一個扇形，Kig 現在不支援。"

#: filters/exporter.cc:72
msgid "&Export to image"
msgstr "匯出到圖像(&E)"

#: filters/exporter.cc:77
msgid "&Image..."
msgstr "圖像(&I)..."

#: filters/exporter.cc:89
msgid "Export as Image"
msgstr "匯出為圖像"

#: filters/exporter.cc:90
msgid "Image Options"
msgstr "圖像選項"

#: filters/exporter.cc:111
msgid "Sorry, this file format is not supported."
msgstr "抱歉，不支援此檔案格式。"

#: filters/exporter.cc:135
#, kde-format
msgid "Sorry, something went wrong while saving to image \"%1\""
msgstr "抱歉，儲存到圖像 %1 時出錯"

#: filters/exporter.cc:158
msgid "&Export To"
msgstr "匯出到(&E)"

#: filters/filter.cc:73
#, kde-format
msgid ""
"The file \"%1\" could not be opened.  This probably means that it does not "
"exist, or that it cannot be opened due to its permissions"
msgstr "檔案 %1 無法開啟。可能檔案不存在，或者因為權限問題無法開啟"

#: filters/filter.cc:82
#, kde-format
msgid ""
"An error was encountered while parsing the file \"%1\".  It cannot be opened."
msgstr "分析檔案 %1 時遇到一個錯誤。無法開啟。"

#: filters/filter.cc:84
msgid "Parse Error"
msgstr "分析錯誤"

#: filters/filter.cc:95
#, kde-format
msgid "Kig cannot open the file \"%1\"."
msgstr "Kig 無法開啟檔案 %1 。"

#: filters/filter.cc:96 misc/lists.cc:325
msgid "Not Supported"
msgstr "不支援"

#. i18n: ectx: property (title), widget (QGroupBox, groupBox)
#: filters/imageexporteroptionswidget.ui:22
msgid "Resolution"
msgstr "解析度"

#. i18n: ectx: property (text), widget (QCheckBox, keepAspectRatio)
#: filters/imageexporteroptionswidget.ui:37
msgid "&Keep Aspect Ratio"
msgstr "保持比例(&K)"

#. i18n: ectx: property (text), widget (QLabel, label_2)
#: filters/imageexporteroptionswidget.ui:54
msgid "Height:"
msgstr "高度："

#. i18n: ectx: property (text), widget (QLabel, label)
#: filters/imageexporteroptionswidget.ui:110
msgid "Width:"
msgstr "寬度："

#: filters/kseg-filter.cc:182
msgid ""
"This KSeg document uses a scaling transformation, which Kig currently cannot "
"import."
msgstr "此 KSeg 檔案使用了縮放轉換，Kig 現在不能匯入。"

#: filters/kseg-filter.cc:561
msgid ""
"This KSeg file contains a filled circle, which Kig does not currently "
"support."
msgstr "此 KSeg 檔案包含一個填充的圓，Kig 現在不支援。"

#: filters/kseg-filter.cc:567
msgid ""
"This KSeg file contains an arc sector, which Kig does not currently support."
msgstr "此 KSeg 檔案包含一個扇形，Kig 現在不支援。"

#: filters/kseg-filter.cc:573
msgid ""
"This KSeg file contains an arc segment, which Kig does not currently support."
msgstr "此 KSeg 檔案包含一段弧線，Kig 現在不支援。"

#: filters/latexexporter.cc:77
msgid "Export to &Latex..."
msgstr "匯出到 Latex(&L)..."

#: filters/latexexporter.cc:82
msgid "&Latex..."
msgstr "Latex(&L)..."

#: filters/latexexporter.cc:538
msgid "*.tex|Latex Documents (*.tex)"
msgstr "*.tex|Latex 文件 (*.tex)"

#: filters/latexexporter.cc:539
msgid "Export as Latex"
msgstr "匯出為 Latex"

#: filters/latexexporter.cc:540
msgid "Latex Options"
msgstr "Latex 選項"

#. i18n: ectx: property (title), widget (QGroupBox, groupBox_2)
#: filters/latexexporteroptionswidget.ui:23
msgid "Output format"
msgstr "輸出格式"

#. i18n: ectx: property (text), widget (QRadioButton, psTricksRadioButton)
#: filters/latexexporteroptionswidget.ui:29
msgid "PSTricks"
msgstr "PSTricks"

#. i18n: ectx: property (text), widget (QRadioButton, tikzRadioButton)
#: filters/latexexporteroptionswidget.ui:36
msgid "Tikz/PGF"
msgstr "Tikz/PGF"

#. i18n: ectx: property (text), widget (QRadioButton, asyRadioButton)
#: filters/latexexporteroptionswidget.ui:46
msgid "Asymptote"
msgstr "Asymptote"

#. i18n: ectx: property (title), widget (QGroupBox, groupBox_3)
#: filters/latexexporteroptionswidget.ui:56
msgid "Document options"
msgstr "文件選項"

#. i18n: ectx: property (text), widget (QRadioButton, pictureRadioButton)
#: filters/latexexporteroptionswidget.ui:62
msgid "Picture only"
msgstr "只有圖片"

#. i18n: ectx: property (text), widget (QRadioButton, documentRadioButton)
#: filters/latexexporteroptionswidget.ui:72
msgid "Standalone document"
msgstr "獨立文件"

#: filters/native-filter.cc:194
#, kde-format
msgid ""
"This file was created by Kig version \"%1\", which this version cannot open."
msgstr "此檔案是 Kig 版本 %1 建立的，無法開啟。"

#: filters/native-filter.cc:200
#, kde-format
msgid ""
"This file was created by Kig version \"%1\".\n"
"Support for older Kig formats (pre-0.4) has been removed from Kig.\n"
"You can try to open this file with an older Kig version (0.4 to 0.6),\n"
"and then save it again, which will save it in the new format."
msgstr ""
"此檔案是 Kig 版本 %1 建立的，無法開啟。\n"
"舊的 Kig 格式 (pre-0.4) 支援已經從 Kig 刪除。\n"
"您可以嘗試使用 Kig 的較早版本 (0.4 到 0.6) 開啟此檔案，\n"
"然後再次儲存它，Kig 會使用新格式儲存它。"

#: filters/native-filter.cc:231 filters/native-filter.cc:425
msgid ""
"This Kig file has a coordinate system that this Kig version does not "
"support.\n"
"A standard coordinate system will be used instead."
msgstr ""
"此 Kig 檔案有一個在此版本的 Kig 中不支援的座標系。\n"
"將使用標準座標系代替。"

#: filters/native-filter.cc:336 filters/native-filter.cc:529
#: objects/object_imp_factory.cc:505
#, kde-format
msgid ""
"This Kig file uses an object of type \"%1\", which this Kig version does not "
"support.Perhaps you have compiled Kig without support for this object type,"
"or perhaps you are using an older Kig version."
msgstr ""
"此 Kig 檔案使用了 %1 物件類型，它不被此版本的 Kig 支援。可能您編譯時沒有支援"
"此物件類型，或者可能您使用了一個舊版本的 Kig。"

#: filters/native-filter.cc:389
#, kde-format
msgid ""
"This Kig file uses an object of type \"%1\", which is obsolete, you should "
"save the construction with a different name and check that it works as "
"expected."
msgstr ""
"此 Kig 檔使用了型態為 %1 的物件，目前已廢棄。建議您將其建構用另外的名稱存起"
"來，並檢查是否可以正常工作。"

#: filters/svgexporter.cc:45
msgid "&Export to SVG..."
msgstr "匯出為 SVG(&E)..."

#: filters/svgexporter.cc:50
msgid "&SVG..."
msgstr "SVG(&S)..."

#: filters/svgexporter.cc:61
msgid "*.svg|Scalable Vector Graphics (*.svg)"
msgstr "*.svg|可縮放向量圖形(*.svg)"

#: filters/svgexporter.cc:62
msgid "Export as SVG"
msgstr "匯出為 SVG"

#: filters/svgexporter.cc:63
msgid "SVG Options"
msgstr "SVG 選項"

#: filters/svgexporter.cc:110
#, kde-format
msgid "Sorry, something went wrong while saving to SVG file \"%1\""
msgstr "抱歉，儲存到 SVG 檔案 %1 時出錯"

#: filters/xfigexporter.cc:60
msgid "Export to &XFig file"
msgstr "匯出到 XFig 檔案(&X)"

#: filters/xfigexporter.cc:66
msgid "&XFig File..."
msgstr "XFig 檔案(&X)..."

#: filters/xfigexporter.cc:580
msgid "*.fig|XFig Documents (*.fig)"
msgstr "*.fig|XFig 文件 (*.fig)"

#: filters/xfigexporter.cc:581
msgid "Export as XFig File"
msgstr "匯出為 XFig 檔案"

#: kig/aboutdata.h:29
msgid "KDE Interactive Geometry"
msgstr "KDE 互動幾何"

#: kig/aboutdata.h:33
msgid "(C) 2002-2005, The Kig developers"
msgstr "(C) 2002-2005, Kig 開發團隊"

#: kig/aboutdata.h:35
msgid "Dominique Devriese"
msgstr "Dominique Devriese"

#: kig/aboutdata.h:36
msgid "Original author, long time maintainer, design and lots of code."
msgstr "原作者，長時間維護者，設計並撰寫大部份的程式碼。"

#: kig/aboutdata.h:39
msgid "Maurizio Paolini"
msgstr "Maurizio Paolini"

#: kig/aboutdata.h:40
msgid ""
"Did a lot of important work all around Kig, including, but not limited to "
"conics, cubics, transformations and property tests support."
msgstr ""
"對 Kig 做了很多很重要的貢獻，包括圓錐、三次曲線、轉換、屬性測試等，還有更多。"

#: kig/aboutdata.h:45
msgid "Pino Toscano"
msgstr "Pino Toscano"

#: kig/aboutdata.h:46
msgid ""
"Actual maintainer, Dr. Geo import filter, point and line styles, Italian "
"translation, miscellaneous stuff here and there."
msgstr ""
"實際維護者，Dr. Geo 匯入過濾器，點與線的樣式，義大利文翻譯，以及一些其他的貢"
"獻。"

#: kig/aboutdata.h:51
msgid "Franco Pasquarelli"
msgstr "Franco Pasquarelli"

#: kig/aboutdata.h:52
msgid ""
"Helped a lot with the implementation of the Locus object, there's quite some "
"math involved in doing it right, and Franco wrote the most difficult parts."
msgstr ""
"協助實作 Locus 物件。這當中有很多跟數學有關的東西，而 Franco 幫忙寫了其中最困"
"難的部份。"

#: kig/aboutdata.h:57
msgid "Francesca Gatti"
msgstr "Francesca Gatti"

#: kig/aboutdata.h:58
msgid "Responsible for the computation of the algebraic equation of a locus."
msgstr "負責計算軌跡的代數方程式"

#: kig/aboutdata.h:62
msgid "Petr Gajdos"
msgstr "Petr Gajdos"

#: kig/aboutdata.h:63
msgid "Contributed the Bézier curves and related icons."
msgstr "貢獻貝氏曲線與相關的圖示。"

#: kig/aboutdata.h:66
msgid "Raoul Bourquin"
msgstr "Raoul Bourquin"

#: kig/aboutdata.h:67
msgid "Contributed the 'asymptote' export filter."
msgstr "貢獻 Asymptote 匯出過濾器。"

#: kig/aboutdata.h:70
msgid "Eric Depagne"
msgstr "Eric Depagne"

#: kig/aboutdata.h:71
msgid ""
"The French translator, who also sent me some useful feedback, like feature "
"requests and bug reports."
msgstr "法文翻譯者，也給了我一些有用的回饋，如功能需求與回報錯誤等。"

#: kig/aboutdata.h:75
msgid "Marc Bartsch"
msgstr "Marc Bartsch"

#: kig/aboutdata.h:76
msgid ""
"Author of KGeo, where I got inspiration, some source, and most of the "
"artwork from."
msgstr "KGeo 的作者，我從他那裡得到了靈感、一些程式碼以及大部分的美工。"

#: kig/aboutdata.h:80
msgid "Christophe Devriese"
msgstr "Christophe Devriese"

#: kig/aboutdata.h:81
msgid ""
"Domi's brother, who he got to write the algorithm for calculating the center "
"of the circle with three points given."
msgstr "Domi 的兄弟，撰寫計算給定三點形成的圓的圓心的演算法。"

#: kig/aboutdata.h:86
msgid "Christophe Prud'homme"
msgstr "Christophe Prud'homme"

#: kig/aboutdata.h:87
msgid "Sent me a patch for some bugs."
msgstr "給我一些錯誤的修補。"

#: kig/aboutdata.h:90
msgid "Robert Gogolok"
msgstr "Robert Gogolok"

#: kig/aboutdata.h:91
msgid ""
"Gave me some good feedback on Kig, some feature requests, cleanups and style "
"fixes, and someone to chat with on irc :)"
msgstr ""
"給了我關於 Kig 的一些很好的回饋，一些功能需求，整理程式碼，以及樣式修補，而且"
"給了我一些在 irc 可以聊天的人 :)"

#: kig/aboutdata.h:96
msgid "David Vignoni"
msgstr "David Vignoni"

#: kig/aboutdata.h:97
msgid "Responsible for the nice application SVG Icon."
msgstr "負責 SVG 圖示"

#: kig/aboutdata.h:100
msgid "Danny Allen"
msgstr "Danny Allen"

#: kig/aboutdata.h:101
msgid "Responsible for the new object action icons."
msgstr "負責新物件動作圖示"

#: kig/kig.cpp:90
msgid "Could not find the necessary Kig library, check your installation."
msgstr "找不到必須的 Kig 函式庫，請檢查您的安裝。"

#: kig/kig.cpp:203
#, kde-format
msgid "Save changes to document %1?"
msgstr "儲存對文件 %1 的更改嗎？"

#: kig/kig.cpp:204
msgid "Save Changes?"
msgstr "儲存更改嗎？"

#: kig/kig.cpp:239
msgid ""
"*.kig *.kigz *.seg *.fgeo *.fig *.FIG|All Supported Files (*.kig *.kigz *."
"seg *.fgeo *.fig)\n"
"*.kig|Kig Documents (*.kig)\n"
"*.kigz|Compressed Kig Documents (*.kigz)\n"
"*.kgeo|KGeo Documents (*.kgeo)\n"
"*.seg|KSeg Documents (*.seg)\n"
"*.fgeo|Dr. Geo Documents (*.fgeo)\n"
"*.fig *.FIG|Cabri Documents (*.fig *.FIG)"
msgstr ""
"*.kig *.kigz *.seg *.fgeo *.fig *.FIG|支援的全部檔案(*.kig *.kigz *.seg *."
"fgeo *.fig)\n"
"*.kig|Kig 文件(*.kig)\n"
"*.kigz|壓縮的 Kig 文件(*.kigz)\n"
"*.kgeo|KGeo 文件(*.kgeo)\n"
"*.seg|KSeg 文件(*.seg)\n"
"*.fgeo|Dr. Geo 文件(*.fgeo)\n"
"*.fig *.FIG|Cabri 文件(*.fig *.FIG)"

#: kig/kig_commands.cpp:100
#, kde-format
msgid "Remove %1 Object"
msgid_plural "Remove %1 Objects"
msgstr[0] "刪除 %1 個物件"

#: kig/kig_commands.cpp:112
#, kde-format
msgid "Add %1 Object"
msgid_plural "Add %1 Objects"
msgstr[0] "新增 %1 個物件"

#: kig/kig_part.cpp:86
msgid "KigPart"
msgstr "KigPart"

#: kig/kig_part.cpp:90
msgid "&Set Coordinate System"
msgstr "設定座標系(&S)"

#: kig/kig_part.cpp:131
msgid "Kig Options"
msgstr "Kig 選項"

#: kig/kig_part.cpp:135
msgid "Show grid"
msgstr "顯示格線"

#: kig/kig_part.cpp:138
msgid "Show axes"
msgstr "顯示座標軸"

#: kig/kig_part.cpp:227
msgid "Invert Selection"
msgstr "反轉選取的內容"

#: kig/kig_part.cpp:234
msgid "&Delete Objects"
msgstr "刪除物件(&D)"

#: kig/kig_part.cpp:238
msgid "Delete the selected objects"
msgstr "刪除選取的物件"

#: kig/kig_part.cpp:240
msgid "Cancel Construction"
msgstr "取消建構"

#: kig/kig_part.cpp:245
msgid "Cancel the construction of the object being constructed"
msgstr "取消即將建構物件的建構動作"

#: kig/kig_part.cpp:248
msgid "Repeat Construction"
msgstr "重覆建構"

#: kig/kig_part.cpp:253
msgid "Repeat the last construction (with new data)"
msgstr "重覆上次的建構動作（產生新資料）"

#: kig/kig_part.cpp:256 modes/popup.cc:936
msgid "U&nhide All"
msgstr "全部取消隱藏(&N)"

#: kig/kig_part.cpp:259
msgid "Show all hidden objects"
msgstr "顯示所有隱藏物件"

#: kig/kig_part.cpp:262
msgid "&New Macro..."
msgstr "新增巨集(&N)..."

#: kig/kig_part.cpp:265
msgid "Define a new macro"
msgstr "定義一個新巨集"

#: kig/kig_part.cpp:267
msgid "Manage &Types..."
msgstr "管理類型(&T)..."

#: kig/kig_part.cpp:270
msgid "Manage macro types."
msgstr "管理巨集類型。"

#: kig/kig_part.cpp:272
msgid "&Browse History..."
msgstr "瀏覽歷史(&B)..."

#: kig/kig_part.cpp:275
msgid "Browse the history of the current construction."
msgstr "瀏覽目前建構的歷史。"

#: kig/kig_part.cpp:282 kig/kig_part.cpp:283
msgid "Zoom in on the document"
msgstr "放大文件"

#: kig/kig_part.cpp:287 kig/kig_part.cpp:288
msgid "Zoom out of the document"
msgstr "縮小文件"

#: kig/kig_part.cpp:294 kig/kig_part.cpp:295
msgid "Recenter the screen on the document"
msgstr "將文件重新顯示在螢幕中央"

#: kig/kig_part.cpp:298 kig/kig_part.cpp:299
msgid "View this document full-screen."
msgstr "用全螢幕檢視此文件。"

#: kig/kig_part.cpp:302
msgid "&Select Shown Area"
msgstr "選擇顯示的區域(&S)"

#: kig/kig_part.cpp:305 kig/kig_part.cpp:306
msgid "Select the area that you want to be shown in the window."
msgstr "選擇您要顯示在視窗中的區域。"

#: kig/kig_part.cpp:308
msgid "S&elect Zoom Area"
msgstr "選擇縮放區域(&E)"

#: kig/kig_part.cpp:314
msgid "Set Coordinate &Precision..."
msgstr "設定座標精確度(&P)..."

#: kig/kig_part.cpp:316
msgid "Set the floating point precision of coordinates in the document. "
msgstr "設定文件中座標的浮點數精確度。"

#: kig/kig_part.cpp:319
msgid "Show &Grid"
msgstr "顯示格線(&G)"

#: kig/kig_part.cpp:321
msgid "Show or hide the grid."
msgstr "顯示或隱藏格線。"

#: kig/kig_part.cpp:325
msgid "Show &Axes"
msgstr "顯示座標軸(&A)"

#: kig/kig_part.cpp:327
msgid "Show or hide the axes."
msgstr "顯示或隱藏座標軸"

#: kig/kig_part.cpp:331
msgid "Wear Infrared Glasses"
msgstr "戴上紅外線眼鏡"

#: kig/kig_part.cpp:333
msgid "Enable/disable hidden objects' visibility."
msgstr "開啟/關閉隱藏物件的可見性。"

#: kig/kig_part.cpp:365
#, kde-format
msgid "Repeat Construction (%1)"
msgstr "重覆建構（%1）"

#: kig/kig_part.cpp:367
#, kde-format
msgid "Repeat %1 (with new data)"
msgstr "重覆 %1（產生新資料）"

#: kig/kig_part.cpp:396
#, kde-format
msgid ""
"The file \"%1\" you tried to open does not exist. Please verify that you "
"entered the correct path."
msgstr "您試圖開啟的檔案 %1 不存在。請檢查您輸入的路徑是否正確。"

#: kig/kig_part.cpp:398
msgid "File Not Found"
msgstr "找不到檔案"

#: kig/kig_part.cpp:416
#, kde-format
msgid ""
"You tried to open a document of type \"%1\"; unfortunately, Kig does not "
"support this format. If you think the format in question would be worth "
"implementing support for, you can always ask us nicely on mailto:pino@kde."
"org or do the work yourself and send me a patch."
msgstr ""
"您試圖開啟型態為 %1 的文件。不過，Kig 無法支援此格式。如果您認為這個格式很重"
"要，Kig 應該要支援它，您可以寄信到 toscano.pino@tiscali.it 跟我們討論，或是您"
"也可以自己做，並將修補檔送來給我們。"

#: kig/kig_part.cpp:422 kig/kig_part.cpp:465
msgid "Format Not Supported"
msgstr "格式不支援"

#: kig/kig_part.cpp:463
msgid ""
"Kig does not support saving to any other file format than its own. Save to "
"Kig's format instead?"
msgstr "Kig 不支援儲存為其它檔案格式。您是否想要將其儲存為 Kig 的格式？"

#: kig/kig_part.cpp:465
msgid "Save Kig Format"
msgstr "儲存 Kig 格式"

#: kig/kig_part.cpp:700
msgid ""
"*.kig|Kig Documents (*.kig)\n"
"*.kigz|Compressed Kig Documents (*.kigz)"
msgstr ""
"*.kig|Kig 文件(*.kig)\n"
"*.kigz|壓縮的 Kig 文件(*.kigz)"

#: kig/kig_part.cpp:711 misc/kigfiledialog.cc:54 modes/typesdialog.cpp:456
#, kde-format
msgid "The file \"%1\" already exists. Do you wish to overwrite it?"
msgstr "檔案 %1 已經存在。您要覆寫它嗎？"

#: kig/kig_part.cpp:712 misc/kigfiledialog.cc:55 modes/typesdialog.cpp:458
msgid "Overwrite File?"
msgstr "覆寫檔案嗎？"

#: kig/kig_part.cpp:869
msgid "Print Geometry"
msgstr "列印幾何"

#: kig/kig_part.cpp:936
#, kde-format
msgid "Hide %1 Object"
msgid_plural "Hide %1 Objects"
msgstr[0] "隱藏 %1 個物件"

#: kig/kig_part.cpp:955
#, kde-format
msgid "Show %1 Object"
msgid_plural "Show %1 Objects"
msgstr[0] "顯示 %1 個物件"

#: kig/kig_view.cpp:220
msgid "Zoom In"
msgstr "放大"

#: kig/kig_view.cpp:240
msgid "Zoom Out"
msgstr "縮小"

#: kig/kig_view.cpp:520
msgid "Recenter View"
msgstr "重新置中檢視"

#: kig/kig_view.cpp:542
msgid "Select the rectangle that should be shown."
msgstr "選擇要顯示的矩形區域。"

#: kig/kig_view.cpp:550 kig/kig_view.cpp:598
msgid "Change Shown Part of Screen"
msgstr "更改螢幕所顯示的部分"

#: kig/kig_view.cpp:587
msgid "Select Zoom Area"
msgstr "選擇縮放區域"

#: kig/kig_view.cpp:588
msgid ""
"Select the zoom area by entering the coordinates<br />of the upper left "
"corner and the lower right corner."
msgstr "請輸入左上角與右下角的座標來選擇要縮放的區域。"

#. i18n: ectx: Menu (file)
#: kig/kigpartui.rc:5 kig/kigui.rc:4
msgid "&File"
msgstr "檔案(&F)"

#. i18n: ectx: Menu (edit)
#: kig/kigpartui.rc:16
msgid "&Edit"
msgstr "編輯(&E)"

#. i18n: ectx: Menu (view)
#: kig/kigpartui.rc:27
msgid "&View"
msgstr "檢視(&V)"

#. i18n: ectx: Menu (objects)
#: kig/kigpartui.rc:35
msgid "&Objects"
msgstr "物件(&O)"

#. i18n: ectx: Menu (new_point)
#: kig/kigpartui.rc:37
msgid "&Points"
msgstr "點(&P)"

#. i18n: ectx: Menu (new_line)
#: kig/kigpartui.rc:49
msgid "&Lines"
msgstr "線(&L)"

#. i18n: ectx: Menu (new_circle)
#: kig/kigpartui.rc:59
msgid "&Circles && Arcs"
msgstr "圓和弧(&C)"

#. i18n: ectx: Menu (new_poligon)
#: kig/kigpartui.rc:70
msgid "Poly&gons"
msgstr "多邊形(&G)"

#. i18n: ectx: Menu (new_vector)
#: kig/kigpartui.rc:82
msgid "&Vectors && Segments"
msgstr "向量和線段(&V)"

#. i18n: ectx: Menu (new_conic)
#: kig/kigpartui.rc:91
msgid "Co&nics && Cubics"
msgstr "二次曲線和三次曲線(&N)"

#. i18n: ectx: Menu (new_moreconics)
#: kig/kigpartui.rc:98
msgid "More Conics"
msgstr "更多二次曲線"

#. i18n: ectx: Menu (new_cubic)
#: kig/kigpartui.rc:113
msgid "Cu&bics"
msgstr "三次曲線(&B)"

#. i18n: ectx: Menu (new_bezier)
#: kig/kigpartui.rc:121
msgid "&Bézier curves"
msgstr "貝氏曲線（Bézier curves）(&B)"

#. i18n: ectx: Menu (new_angle)
#: kig/kigpartui.rc:131
msgid "&Angles"
msgstr "角(&A)"

#. i18n: ectx: Menu (new_transformation)
#: kig/kigpartui.rc:136
msgid "&Transformations"
msgstr "轉換(&T)"

#. i18n: ectx: Menu (new_differentialgeometry)
#: kig/kigpartui.rc:154
msgid "&Differential geometry"
msgstr "微分幾何(&D)"

#. i18n: ectx: Menu (new_test)
#: kig/kigpartui.rc:161
msgid "T&ests"
msgstr "測試(&E)"

#. i18n: ectx: Menu (new_other)
#: kig/kigpartui.rc:172
msgid "&Other"
msgstr "其它(&O)"

#. i18n: ectx: Menu (types)
#: kig/kigpartui.rc:186
msgid "&Types"
msgstr "類型(&T)"

#. i18n: ectx: Menu (tools)
#: kig/kigpartui.rc:191
msgid "&Tools"
msgstr "工具(&T)"

#. i18n: ectx: ToolBar (mainToolBar)
#: kig/kigpartui.rc:204 kig/kigui.rc:23
msgid "Main Toolbar"
msgstr "主工具列"

#. i18n: ectx: ToolBar (points_toolbar)
#: kig/kigpartui.rc:218
msgid "Points"
msgstr "點"

#. i18n: ectx: ToolBar (line_toolbar)
#: kig/kigpartui.rc:229
msgid "Lines"
msgstr "線"

#. i18n: ectx: ToolBar (vectseg_toolbar)
#: kig/kigpartui.rc:239
msgid "Vectors && Segments"
msgstr "向量和線段"

#. i18n: ectx: ToolBar (circle_toolbar)
#: kig/kigpartui.rc:247
msgid "Circles && Arcs"
msgstr "圓和弧"

#. i18n: ectx: ToolBar (conic_toolbar)
#: kig/kigpartui.rc:255
msgid "Conics"
msgstr "二次曲線"

#. i18n: ectx: ToolBar (bezier_toolbar)
#: kig/kigpartui.rc:264
msgid "Bézier Curves"
msgstr "貝氏曲線（Bézier curves）"

#. i18n: ectx: ToolBar (angles_toolbar)
#: kig/kigpartui.rc:274
msgid "Angles"
msgstr "角"

#. i18n: ectx: ToolBar (transformation_toolbar)
#: kig/kigpartui.rc:279
msgid "Transformations"
msgstr "轉換"

#. i18n: ectx: ToolBar (tests_toolbar)
#: kig/kigpartui.rc:293
msgid "Tests"
msgstr "測試"

#. i18n: ectx: ToolBar (rest_toolbar)
#: kig/kigpartui.rc:305
msgid "Other Objects"
msgstr "其它物件"

#. i18n: ectx: ToolBar (view_toolbar)
#: kig/kigpartui.rc:313
msgid "View"
msgstr "檢視"

#. i18n: ectx: Menu (settings)
#: kig/kigui.rc:13
msgid "&Settings"
msgstr "設定(&S)"

#: kig/main.cpp:98
msgid "Kig"
msgstr "Kig"

#: kig/main.cpp:104
msgid ""
"Do not show a GUI. Convert the specified file to the native Kig format. "
"Output goes to stdout unless --outfile is specified."
msgstr ""
"不要顯示使用者介面。將指定的檔案轉換成 Kig 格式。除非有指定 --outfile 否則將"
"輸出送到標準輸出（stdout）。"

#: kig/main.cpp:106
msgid ""
"File to output the created native file to. '-' means output to stdout. "
"Default is stdout as well."
msgstr ""
"要輸出的檔案名稱。\"-\" 表示輸出到標準輸出（stdout）。預設是使用標準輸出。"

#: kig/main.cpp:107
msgid "Document to open"
msgstr "要開啟的文件"

#: misc/builtin_stuff.cc:60
msgid "Point by Numeric Labels"
msgstr "用數字座標定點"

#: misc/builtin_stuff.cc:61
msgid "A point whose coordinates are given by two numeric labels"
msgstr "用兩個數字來表示座標的點"

#: misc/builtin_stuff.cc:68
msgid "Segment"
msgstr "線段"

#: misc/builtin_stuff.cc:69
msgid "A segment constructed from its start and end point"
msgstr "用開始點和結束點來建構線段"

#: misc/builtin_stuff.cc:76
msgid "Line by Two Points"
msgstr "用兩點決定直線"

#: misc/builtin_stuff.cc:77
msgid "A line constructed through two points"
msgstr "過兩點建構一直線"

#: misc/builtin_stuff.cc:83
msgid "Half-Line"
msgstr "半線"

#: misc/builtin_stuff.cc:84
msgid "A half-line by its start point, and another point somewhere on it."
msgstr "有一個起點，並通過另一個點的半線"

#: misc/builtin_stuff.cc:91
msgid "Perpendicular"
msgstr "垂線"

#: misc/builtin_stuff.cc:92
msgid ""
"A line constructed through a point, perpendicular to another line or segment."
msgstr "通過一點且平行於另一條直線或線段的直線"

#: misc/builtin_stuff.cc:99
msgid "Parallel"
msgstr "平行線"

#: misc/builtin_stuff.cc:100
msgid ""
"A line constructed through a point, and parallel to another line or segment"
msgstr "過一點且平行於另一條直線或線段的直線"

#: misc/builtin_stuff.cc:107
msgid "Circle by Center && Point"
msgstr "用圓心和點決定圓"

#: misc/builtin_stuff.cc:108
msgid "A circle constructed by its center and a point that pertains to it"
msgstr "由圓心和附屬的點來建構的圓"

#: misc/builtin_stuff.cc:114
msgid "Circle by Three Points"
msgstr "用三點決定圓"

#: misc/builtin_stuff.cc:115
msgid "A circle constructed through three points"
msgstr "根據三點建構的圓"

#: misc/builtin_stuff.cc:121
msgid "Circle by Point && Radius"
msgstr "由圓心和半徑決定圓"

#: misc/builtin_stuff.cc:122
msgid "A circle defined by its center and the length of the radius"
msgstr "由圓心及某線段長度做為半徑來建構圓"

#: misc/builtin_stuff.cc:137
msgid "Construct Bisector of This Angle"
msgstr "建構此角的角平分線"

#: misc/builtin_stuff.cc:138
msgid "Select the angle you want to construct the bisector of..."
msgstr "選擇您想要建構角平分線的角..."

#: misc/builtin_stuff.cc:139 objects/other_imp.cc:107
msgid "Angle Bisector"
msgstr "角平分線"

#: misc/builtin_stuff.cc:140
msgid "The bisector of an angle"
msgstr "一個角的角平分線"

#: misc/builtin_stuff.cc:147
msgid "Conic by Five Points"
msgstr "用五點決定二次曲線"

#: misc/builtin_stuff.cc:148
msgid "A conic constructed through five points"
msgstr "根據五點建構的二次曲線"

#: misc/builtin_stuff.cc:155
msgid "Hyperbola by Asymptotes && Point"
msgstr "用漸進線和點建構雙曲線"

#: misc/builtin_stuff.cc:156
msgid "A hyperbola with given asymptotes through a point"
msgstr "具有給定漸近線並經過另一點的雙曲線"

#: misc/builtin_stuff.cc:163
msgid "Ellipse by Focuses && Point"
msgstr "用焦點和點建構橢圓"

#: misc/builtin_stuff.cc:164
msgid "An ellipse constructed by its focuses and a point that pertains to it"
msgstr "根據焦點和橢圓上一點決定的橢圓"

#: misc/builtin_stuff.cc:171
msgid "Hyperbola by Focuses && Point"
msgstr "用焦點和點建構雙曲線"

#: misc/builtin_stuff.cc:172
msgid "A hyperbola constructed by its focuses and a point that pertains to it"
msgstr "根據焦點和雙曲線上一點建構的雙曲線"

#: misc/builtin_stuff.cc:179
msgid "Conic by Directrix, Focus && Point"
msgstr "用準線、焦點和點建構二次曲線"

#: misc/builtin_stuff.cc:180
msgid "A conic with given directrix and focus, through a point"
msgstr "具有給定準線和焦點並經過另一點的二次曲線"

#: misc/builtin_stuff.cc:187
msgid "Vertical Parabola by Three Points"
msgstr "用三點建構垂直拋物線"

#: misc/builtin_stuff.cc:188
msgid "A vertical parabola constructed through three points"
msgstr "過三點建構的垂直拋物線"

#: misc/builtin_stuff.cc:195
msgid "Cubic Curve by Nine Points"
msgstr "用九點建構三次曲線"

#: misc/builtin_stuff.cc:196
msgid "A cubic curve constructed through nine points"
msgstr "根據九個點建構的三次曲線"

#: misc/builtin_stuff.cc:203
msgid "Polar Point of a Line"
msgstr "一直線的極點"

#: misc/builtin_stuff.cc:204
msgid "The polar point of a line with respect to a conic."
msgstr "一條直線相對於一條二次曲線的極點。"

#: misc/builtin_stuff.cc:211
msgid "Polar Line of a Point"
msgstr "一點的極線"

#: misc/builtin_stuff.cc:212
msgid "The polar line of a point with respect to a conic."
msgstr "一點相對於一條二次曲線的極線。"

#: misc/builtin_stuff.cc:219
msgid "Cubic Curve with Node by Six Points"
msgstr "用六點建構含節點的三次曲線"

#: misc/builtin_stuff.cc:220
msgid "A cubic curve with a nodal point at the origin through six points"
msgstr "根據六個點建構的含節點的三次曲線"

#: misc/builtin_stuff.cc:227
msgid "Cubic Curve with Cusp by Four Points"
msgstr "用四點建構含尖端的三次曲線"

#: misc/builtin_stuff.cc:228
msgid "A cubic curve with a horizontal cusp at the origin through four points"
msgstr "根據四個點建構的含水平尖端的三次曲線"

#: misc/builtin_stuff.cc:235
msgid "Cubic Function by Four Points"
msgstr "用四點建構含尖端的三次曲線"

#: misc/builtin_stuff.cc:236
msgid "A cubic function through four points"
msgstr "用四點建構含尖端的三次曲線"

#: misc/builtin_stuff.cc:243
msgid "Directrix of a Conic"
msgstr "二次曲線的準線"

#: misc/builtin_stuff.cc:244
msgid "The directrix line of a conic."
msgstr "二次曲線的準線。"

#: misc/builtin_stuff.cc:251
msgid "Angle by Three Points"
msgstr "用三點建構角"

#: misc/builtin_stuff.cc:252
msgid "An angle defined by three points"
msgstr "根據三點定義的角"

#: misc/builtin_stuff.cc:259
msgid "Equilateral Hyperbola by Four Points"
msgstr "用四點建構等邊雙曲線"

#: misc/builtin_stuff.cc:260
msgid "An equilateral hyperbola constructed through four points"
msgstr "根據四個點建構的等邊雙曲線"

#: misc/builtin_stuff.cc:277
msgid "Construct the midpoint of this segment"
msgstr "建構此線段的中點"

#: misc/builtin_stuff.cc:283 objects/line_imp.cc:124
msgid "Mid Point"
msgstr "中點"

#: misc/builtin_stuff.cc:284
msgid "The midpoint of a segment or two other points"
msgstr "一段線段中點或另外兩個點"

#: misc/builtin_stuff.cc:293
msgid "Vector"
msgstr "向量"

#: misc/builtin_stuff.cc:294
msgid "Construct a vector from two given points."
msgstr "根據兩點建構向量。"

#: misc/builtin_stuff.cc:301
msgid "Vector Sum"
msgstr "向量和"

#: misc/builtin_stuff.cc:302
msgid "Construct the vector sum of two vectors."
msgstr "建構兩個向量的向量和。"

#: misc/builtin_stuff.cc:309
msgid "Line by Vector"
msgstr "用向量建構直線"

#: misc/builtin_stuff.cc:310
msgid "Construct the line by a given vector though a given point."
msgstr "由給定的向量通過給定的點來建構直線。"

#: misc/builtin_stuff.cc:317
msgid "Half-Line by Vector"
msgstr "用向量建構半線"

#: misc/builtin_stuff.cc:318
msgid "Construct the half-line by a given vector starting at given point."
msgstr "由給定的向量從給定的點開始來建構半線。"

#: misc/builtin_stuff.cc:325
msgid "Arc by Three Points"
msgstr "用三點建構弧"

#: misc/builtin_stuff.cc:326
msgid "Construct an arc through three points."
msgstr "通過三點建構一個弧。"

#: misc/builtin_stuff.cc:333
msgid "Conic Arc by Center and Three Points"
msgstr "用圓心與三點建構二次曲線"

#: misc/builtin_stuff.cc:334
msgid "Construct a conic arc with given center through three points."
msgstr "用圓心與三點建構二次曲線"

#: misc/builtin_stuff.cc:341
msgid "Conic Arc by Five Points"
msgstr "用五點決定二次曲線"

#: misc/builtin_stuff.cc:342
msgid "Construct a conic arc through five points."
msgstr "用五點決定二次曲線"

#: misc/builtin_stuff.cc:349
msgid "Arc by Center, Angle && Point"
msgstr "由圓心、角度和點建構弧"

#: misc/builtin_stuff.cc:350
msgid ""
"Construct an arc by its center and a given angle, starting at a given point"
msgstr "由圓心、給定角度，並由給定的點開始建構一個弧"

#: misc/builtin_stuff.cc:358
msgid "Parabola by Directrix && Focus"
msgstr "用準線和焦點建構拋物線"

#: misc/builtin_stuff.cc:359
msgid "A parabola defined by its directrix and focus"
msgstr "由準線和焦點定義的拋物線"

#: misc/builtin_stuff.cc:379
msgid "Translate"
msgstr "平移"

#: misc/builtin_stuff.cc:380
msgid "The translation of an object by a vector"
msgstr "將物件按給定向量平移"

#: misc/builtin_stuff.cc:387
msgid "Reflect in Point"
msgstr "點對稱"

#: misc/builtin_stuff.cc:388
msgid "An object reflected in a point"
msgstr "做某物件的點對稱圖形"

#: misc/builtin_stuff.cc:395
msgid "Reflect in Line"
msgstr "線對稱"

#: misc/builtin_stuff.cc:396
msgid "An object reflected in a line"
msgstr "做某物件的線對稱圖形"

#: misc/builtin_stuff.cc:403
msgid "Rotate"
msgstr "旋轉"

#: misc/builtin_stuff.cc:404
msgid "An object rotated by an angle around a point"
msgstr "將物件繞著某點做某角度的旋轉"

#: misc/builtin_stuff.cc:411
msgid "Scale"
msgstr "縮放"

#: misc/builtin_stuff.cc:412
msgid ""
"Scale an object over a point, by the ratio given by the length of a segment"
msgstr "將物件根據一個點做縮放，縮放方式為給定線段長度的比例。"

#: misc/builtin_stuff.cc:419
msgid "Scale over Line"
msgstr "根據線做縮放"

#: misc/builtin_stuff.cc:420
msgid ""
"An object scaled over a line, by the ratio given by the length of a segment"
msgstr "將物件根據一條直線做縮放，縮放方式為給定線段長度的比例。"

#: misc/builtin_stuff.cc:427
msgid "Scale (ratio given by two segments)"
msgstr "縮放（根據兩個線段比例）"

#: misc/builtin_stuff.cc:428
msgid ""
"Scale an object over a point, by the ratio given by the length of two "
"segments"
msgstr "將物件根據一個點做縮放，縮放方式為給定兩個線段長度的比例。"

#: misc/builtin_stuff.cc:435
msgid "Scale over Line (ratio given by two segments)"
msgstr "根據線做縮放（根據兩個線段比例）"

#: misc/builtin_stuff.cc:436
msgid ""
"An object scaled over a line, by the ratio given by the length of two "
"segments"
msgstr "將物件根據一條直線做縮放，縮放方式為給定兩個線段長度的比例。"

#: misc/builtin_stuff.cc:443
msgid "Apply Similitude"
msgstr "產生相似形"

#: misc/builtin_stuff.cc:444
msgid ""
"Apply a similitude to an object (the sequence of a scaling and rotation "
"around a center)"
msgstr "對一物件產生其相似形（給定一中心點與物件上某一點，產生一個相似形）"

#: misc/builtin_stuff.cc:451
msgid "Harmonic Homology"
msgstr "調和同調（Harmonic Homology）"

#: misc/builtin_stuff.cc:452
msgid ""
"The harmonic homology with a given center and a given axis (this is a "
"projective transformation)"
msgstr "利用給定中心點與軸計算調和同調（這是一種投影轉換）"

#: misc/builtin_stuff.cc:467
msgid "Draw Projective Shadow"
msgstr "繪製投射陰影"

#: misc/builtin_stuff.cc:468
msgid ""
"The shadow of an object with a given light source and projection plane "
"(indicated by a line)"
msgstr "給定一光源與一平面，繪製某物件投射在該平面上的陰影"

#: misc/builtin_stuff.cc:483
msgid "Asymptotes of a Hyperbola"
msgstr "雙曲線的漸近線"

#: misc/builtin_stuff.cc:484
msgid "The two asymptotes of a hyperbola."
msgstr "雙曲線的兩條漸近線。"

#: misc/builtin_stuff.cc:497
msgid "Triangle by Its Vertices"
msgstr "用頂點建構三角形"

#: misc/builtin_stuff.cc:498
msgid "Construct a triangle given its three vertices."
msgstr "根據給定的三個頂點繪製三角形。"

#: misc/builtin_stuff.cc:524
msgid "Convex Hull"
msgstr "凸包（Convex Hull）"

#: misc/builtin_stuff.cc:525
msgid "A polygon that corresponds to the convex hull of another polygon"
msgstr "與其他多邊形的凸包相關的多邊形"

#: misc/builtin_stuff.cc:536
msgid "Bézier Quadratic by its Control Points"
msgstr "由控制點建立貝氏二次曲線"

#: misc/builtin_stuff.cc:537
msgid "Construct a Bézier quadratic given its three control points."
msgstr "用三個控制點來建立貝氏二次曲線。"

#: misc/builtin_stuff.cc:544
msgid "Bézier Cubic by its Control Points"
msgstr "由控制點建立貝氏三次立方體"

#: misc/builtin_stuff.cc:545
msgid "Construct a Bézier cubic given its four control points."
msgstr "用四個控制點來建立貝氏三次立方體。"

#: misc/builtin_stuff.cc:556
msgid "Rational Bézier Quadratic by its Control Points"
msgstr "由控制點建立有理貝氏二次曲線（Rational Bézier Quadric）"

#: misc/builtin_stuff.cc:557
msgid "Construct a Rational Bézier quadratic given its three control points."
msgstr "用三個控制點來建立有理貝氏二次曲線。"

#: misc/builtin_stuff.cc:564
msgid "Rational Bézier Cubic by its Control Points"
msgstr "由控制點建立有理貝氏三次立方體"

#: misc/builtin_stuff.cc:565
msgid "Construct a Rational Bézier cubic given its four control points."
msgstr "用四個控制點來建立有理貝氏三次立方體。"

#: misc/builtin_stuff.cc:584
msgid "Parallel Test"
msgstr "平行測試"

#: misc/builtin_stuff.cc:585
msgid "Test whether two given lines are parallel"
msgstr "測試兩條給定的直線是否平行"

#: misc/builtin_stuff.cc:592
msgid "Orthogonal Test"
msgstr "垂直測試"

#: misc/builtin_stuff.cc:593
msgid "Test whether two given lines are orthogonal"
msgstr "測試兩條給定的直線是否垂直"

#: misc/builtin_stuff.cc:600
msgid "Collinear Test"
msgstr "共線測試"

#: misc/builtin_stuff.cc:601
msgid "Test whether three given points are collinear"
msgstr "測試三個給定的點是否共線"

#: misc/builtin_stuff.cc:608
msgid "Contains Test"
msgstr "包含測試"

#: misc/builtin_stuff.cc:609
msgid "Test whether a given curve contains a given point"
msgstr "測試給定曲線是否包含給定點"

#: misc/builtin_stuff.cc:616
msgid "In Polygon Test"
msgstr "多邊形測試"

#: misc/builtin_stuff.cc:617
msgid "Test whether a given polygon contains a given point"
msgstr "測試給定的多邊形是否包含了給定的點"

#: misc/builtin_stuff.cc:624
msgid "Convex Polygon Test"
msgstr "凸多邊形測試"

#: misc/builtin_stuff.cc:625
msgid "Test whether a given polygon is convex"
msgstr "測試給定的多邊形是否屬於凸多邊形"

#: misc/builtin_stuff.cc:632
msgid "Existence Test"
msgstr "存在測試"

#: misc/builtin_stuff.cc:633
msgid "Test whether a given object is constructible"
msgstr "測試給定的物件是否可建構"

#: misc/builtin_stuff.cc:640
msgid "Distance Test"
msgstr "距離測試"

#: misc/builtin_stuff.cc:641
msgid ""
"Test whether a given point have the same distance from a given point and "
"from another given point"
msgstr "測試一給定點與其它兩點之間的距離是否相等"

#: misc/builtin_stuff.cc:649
msgid "Vector Equality Test"
msgstr "向量相等測試"

#: misc/builtin_stuff.cc:650
msgid "Test whether two vectors are equal"
msgstr "測試兩個向量是否相等"

#: misc/builtin_stuff.cc:691 modes/popup.cc:1024
msgid "Python Script"
msgstr "Python 文稿"

#: misc/builtin_stuff.cc:692
msgid "Construct a new Python script."
msgstr "建構新的 Python 文稿。"

#: misc/coordinate_system.cpp:325
msgid ""
"Enter coordinates in the following format: \"x;y\",\n"
"where x is the x coordinate, and y is the y coordinate."
msgstr ""
"請用以下格式輸入座標：\"x,y\"，\n"
"這裡 x 是 x 軸座標，y 是 y 軸座標。"

#: misc/coordinate_system.cpp:331
msgid ""
"Enter coordinates in the following format: <b>\"x;y\"</b>,<br />where x is "
"the x coordinate, and y is the y coordinate."
msgstr ""
"請用以下格式輸入座標：<b>\"x,y\"</b>，這裡 x 是 x 軸座標，y 是 y 軸座標。"

#: misc/coordinate_system.cpp:371
msgid ""
"Enter coordinates in the following format: \"r; θ°\",\n"
"where r and θ are the polar coordinates."
msgstr ""
"請用以下格式輸入座標：\"r, θ°\"，\n"
"這裡 r 和 θ 是極座標 。 "

#: misc/coordinate_system.cpp:378
msgid ""
"Enter coordinates in the following format: <b>\"r; θ°\"</b>,<br />where r "
"and θ are the polar coordinates."
msgstr "請用以下格式輸入座標：<b>\"r; θ°\"</b>，這裡 r 和 θ 是極座標。"

#: misc/coordinate_system.cpp:530
msgid "&Euclidean"
msgstr "直角座標(&E)"

#: misc/coordinate_system.cpp:531
msgid "&Polar"
msgstr "極座標(&P)"

#: misc/coordinate_system.cpp:581
msgid "Set Euclidean Coordinate System"
msgstr "設定直角座標系"

#: misc/coordinate_system.cpp:583
msgid "Set Polar Coordinate System"
msgstr "設定極座標系"

#: misc/goniometry.cc:122
msgctxt "Translators: Degrees"
msgid "Deg"
msgstr "度"

#: misc/goniometry.cc:123
msgctxt "Translators: Radians"
msgid "Rad"
msgstr "弧度"

#: misc/goniometry.cc:124
msgctxt "Translators: Gradians"
msgid "Grad"
msgstr "梯度"

#: misc/guiaction.cc:121
msgid ""
"A normal point, i.e. one that is either independent or attached to a line, "
"circle, segment."
msgstr "一般的點，也就是獨立的點，或是附在直線、圓、線段上的點。"

#: misc/guiaction.cc:133
msgid "Point"
msgstr "點"

#: misc/guiaction.cc:174
msgid "Construct a text label."
msgstr "建構文字標籤。"

#: misc/guiaction.cc:184
msgid "Text Label"
msgstr "文字標籤"

#: misc/guiaction.cc:205
msgid "Construct a Point by its Coordinates"
msgstr "用座標來定點"

#: misc/guiaction.cc:215
msgid "Point by Coordinates"
msgstr "用座標定點"

#: misc/guiaction.cc:228
msgid "Fixed Point"
msgstr "固定點"

#: misc/guiaction.cc:229
msgid "Enter the coordinates for the new point."
msgstr "輸入新點的座標。"

#: misc/guiaction.cc:250
msgid "Construct a Numeric Value"
msgstr "建構數值"

#: misc/guiaction.cc:260
msgid "Numeric Value"
msgstr "數值"

#. i18n: ectx: property (text), widget (QCheckBox, m_defaultCheckBox)
#: misc/kigcoordinateprecisiondialog.ui:9
msgid "&Use default coordinate precision"
msgstr "使用預設的座標精確度(&U)"

#. i18n: ectx: property (text), widget (QLabel, m_precisionLabel)
#: misc/kigcoordinateprecisiondialog.ui:16
msgid "&Specify coordinate precision:"
msgstr "指定座標精確度(&S)："

#: misc/kiginputdialog.cc:130
msgid "Set Angle Size"
msgstr "設定角大小"

#: misc/kiginputdialog.cc:144
msgid "Insert the new size of this angle:"
msgstr "插入此角的新大小："

#: misc/kiginputdialog.cc:155
msgid "Use this edit field to modify the size of this angle."
msgstr "使用此編輯欄位修改此角的大小。"

#: misc/kiginputdialog.cc:162
msgid ""
"Choose from this list the goniometric unit you want to use to modify the "
"size of this angle.<br />\n"
"If you switch to another unit, the value in the edit field on the left will "
"be converted to the new selected unit."
msgstr ""
"從此清單中選取您要用來改變此角的角度單位。<br>\n"
"如果您切換到其它的單位，在編輯欄位中的值會轉換成新單位的值。"

#: misc/lists.cc:303 misc/lists.cc:309
#, kde-format
msgid "Could not open macro file '%1'"
msgstr "無法開啟巨集檔案 %1 。"

#: misc/lists.cc:320
#, kde-format
msgid "Kig cannot open the macro file \"%1\"."
msgstr "Kig 無法開啟巨集檔案 %1 。"

#: misc/lists.cc:321
msgid ""
"This file was created by a very old Kig version (pre-0.4). Support for this "
"format has been removed from recent Kig versions. You can try to import this "
"macro using a previous Kig version (0.4 to 0.6) and then export it again in "
"the new format."
msgstr ""
"此檔案是 Kig 的早先版本版本（0.4 之前）建立的。而對此格式的支援已經從最近的 "
"Kig 中刪除。您可以嘗試使用 Kig 的先前版本（0.4 到 0.6）匯入此巨集，然後再將其"
"匯出為新格式。"

#: misc/lists.cc:377
#, kde-format
msgid "Unnamed Macro #%1"
msgstr "未命名巨集 #%1"

#: misc/object_hierarchy.cc:551
#, kde-format
msgid ""
"This Kig file uses an object of type \"%1\", which this Kig version does not "
"support. Perhaps you have compiled Kig without support for this object type, "
"or perhaps you are using an older Kig version."
msgstr ""
"此 Kig 檔案使用了 %1 物件類型，它不被此版本的 Kig 支援。可能您編譯時沒有支援"
"此物件類型，或者可能您使用了一個舊版本的 Kig。"

#: misc/special_constructors.cc:325
msgid "Radical Lines for Conics"
msgstr "二次曲線的公弦"

#: misc/special_constructors.cc:326
msgid ""
"The lines constructed through the intersections of two conics.  This is also "
"defined for non-intersecting conics."
msgstr "通過兩個二次曲線交點的直線。對未相交的二次曲線也有其定義。"

#: misc/special_constructors.cc:384 misc/special_constructors.cc:480
msgid "Moving Point"
msgstr "移動點"

#: misc/special_constructors.cc:385
msgid ""
"Select the moving point, which will be moved around while drawing the "
"locus..."
msgstr "選取移動點，在繪製軌跡時會被移動..."

#: misc/special_constructors.cc:386
msgid "Following Point"
msgstr "跟隨點"

#: misc/special_constructors.cc:387
msgid ""
"Select the following point, whose locations the locus will be drawn "
"through..."
msgstr "選取跟隨點，繪製軌跡時會通過這些點..."

#: misc/special_constructors.cc:391
msgid "Locus"
msgstr "軌跡"

#: misc/special_constructors.cc:391
msgid "A locus"
msgstr "軌跡"

#: misc/special_constructors.cc:481
msgid "Dependent Point"
msgstr "相依點"

#: misc/special_constructors.cc:599
msgid "Polygon by Its Vertices"
msgstr "頂點決定的多邊形"

#: misc/special_constructors.cc:600
msgid "Construct a polygon by giving its vertices"
msgstr "根據給定的頂點建構多邊形"

#: misc/special_constructors.cc:636
msgid ""
"... with this vertex (click on the first vertex to terminate construction)"
msgstr "... 此為頂點（點選第一個頂點則結束建構）"

#: misc/special_constructors.cc:637
msgid "Construct a polygon with this vertex"
msgstr "以此頂點建構一個多邊形"

#: misc/special_constructors.cc:644
msgid "Select a point to be a vertex of the new polygon..."
msgstr "選擇點做為新多邊形的頂點"

#: misc/special_constructors.cc:678
msgid "Open Polygon (Polygonal Line)"
msgstr "開放式多邊形（多邊形線）"

#: misc/special_constructors.cc:679
msgid "Construct an open polygon"
msgstr "建構開放式多邊形"

#: misc/special_constructors.cc:715
msgid ""
"... with this vertex (click again on the last vertex to terminate "
"construction)"
msgstr "... 此為頂點（再次點選最後一個頂點則結束建構）"

#: misc/special_constructors.cc:716
msgid "Construct a polygonal line with this vertex"
msgstr "用此頂點建構一個多邊形的邊"

#: misc/special_constructors.cc:723
msgid "Select a point to be a vertex of the new polygonal line..."
msgstr "選擇點做為新多邊形邊的頂點..."

#: misc/special_constructors.cc:756 misc/special_constructors.cc:823
msgid "Polygon"
msgstr "多邊形"

#: misc/special_constructors.cc:757
msgid "Construct the vertices of this polygon..."
msgstr "建構此多邊形的頂點..."

#: misc/special_constructors.cc:761
msgid "Vertices of a Polygon"
msgstr "多邊形的頂點"

#: misc/special_constructors.cc:762
msgid "The vertices of a polygon."
msgstr "多邊形的頂點"

#: misc/special_constructors.cc:824
msgid "Construct the sides of this polygon..."
msgstr "建構此多邊形的邊..."

#: misc/special_constructors.cc:828
msgid "Sides of a Polygon"
msgstr "多邊形的邊"

#: misc/special_constructors.cc:829
msgid "The sides of a polygon."
msgstr "多邊形的邊。"

#: misc/special_constructors.cc:900
msgid "Regular Polygon with Given Center"
msgstr "給定中心決定正多邊形"

#: misc/special_constructors.cc:905
msgid "Construct a regular polygon with a given center and vertex"
msgstr "根據給定中心和頂點建構正多邊形"

#: misc/special_constructors.cc:1064
msgid "Construct a regular polygon with this center"
msgstr "建構一個以此為中心的正多邊形"

#: misc/special_constructors.cc:1068
msgid "Construct a regular polygon with this vertex"
msgstr "建構一個以此為頂點的正多邊形"

#: misc/special_constructors.cc:1080
#, kde-format
msgid "Adjust the number of sides (%1/%2)"
msgstr "調整邊數(%1/%2)"

#: misc/special_constructors.cc:1084
#, kde-format
msgid "Adjust the number of sides (%1)"
msgstr "調整邊數(%1)"

#: misc/special_constructors.cc:1100
msgid "Select the center of the new polygon..."
msgstr "選擇新多邊形的中心..."

#: misc/special_constructors.cc:1104
msgid "Select a vertex for the new polygon..."
msgstr "選擇新多邊形的頂點..."

#: misc/special_constructors.cc:1108
msgid "Move the cursor to get the desired number of sides..."
msgstr "移動游標以取得希望的邊數..."

#: misc/special_constructors.cc:1190
msgid "Bézier Curve by its Control Points"
msgstr "由控制點建立貝氏曲線"

#: misc/special_constructors.cc:1191
msgid "Construct a Bézier curve by giving its control points"
msgstr "用控制點來建立貝氏曲線。"

#: misc/special_constructors.cc:1227
msgid ""
"... with this control point (click again on the last control point to "
"terminate construction)"
msgstr "... 此為控制點（再點選最後一個頂點則結束建構）"

#: misc/special_constructors.cc:1228
msgid "Construct a Bézier curve with this control point"
msgstr "用控制點來建立貝氏曲線"

#: misc/special_constructors.cc:1235
msgid "Select a point to be a control point of the new Bézier curve..."
msgstr "選擇新貝氏曲線的控制點..."

#: misc/special_constructors.cc:1272
msgid "Rational Bézier Curve by its Control Points"
msgstr "由控制點建立合理貝氏曲線"

#: misc/special_constructors.cc:1277
msgid ""
"Construct a Bézier curve by giving its control points and positive weights"
msgstr "用控制點與正權值來建立貝氏曲線"

#: misc/special_constructors.cc:1342
msgid "... assign this weight to last selected control point"
msgstr "... 指定此權值給上次選取的控制點"

#: misc/special_constructors.cc:1345
msgid ""
"... with this control point (click again on the last control point or weight "
"to terminate construction)"
msgstr "... 此為控制點（再點選最後一個頂點或權值則結束建構）"

#: misc/special_constructors.cc:1346
msgid "Construct a rational Bézier curve with this control point"
msgstr "用控制點來建立合理貝氏曲線"

#: misc/special_constructors.cc:1354
msgid ""
"Select a point to be a control point of the new rational Bézier curve..."
msgstr "選擇新合理貝氏曲線的控制點..."

#: misc/special_constructors.cc:1356
msgid "Select a numeric label to be a weight of last selected point..."
msgstr "選擇做為上次選取點的權值的數值標籤"

#: misc/special_constructors.cc:1549
msgid "Construct the Radical Lines of This Circle"
msgstr "建構此圓的公弦"

#: misc/special_constructors.cc:1551
msgid "Construct the Radical Lines of This Conic"
msgstr "建構此二次曲線的公弦"

#: misc/special_constructors.cc:1566
msgid "Generic Affinity"
msgstr "一般相似形"

#: misc/special_constructors.cc:1567
msgid ""
"The unique affinity that maps three points (or a triangle) onto three other "
"points (or a triangle)"
msgstr "利用某三點（或某三角形）映射到其他三點（或其他三角形）產生的唯一相似形"

#: misc/special_constructors.cc:1590
msgid "Generic Projective Transformation"
msgstr "一般投影轉換"

#: misc/special_constructors.cc:1591
msgid ""
"The unique projective transformation that maps four points (or a "
"quadrilateral) onto four other points (or a quadrilateral)"
msgstr ""
"利用某四點（或某四邊形）映射到其他四點（或其他四邊形）產生的唯一投影轉換"

#: misc/special_constructors.cc:1618
msgid "Inversion of Point, Line or Circle"
msgstr "點、線或圓的反演（inversion）"

#: misc/special_constructors.cc:1619
msgid "The inversion of a point, line or circle with respect to a circle"
msgstr "某點、線或圓對某圓的反演變換"

#: misc/special_constructors.cc:1683
msgid "Measure Transport"
msgstr "測量並傳送其大小"

#: misc/special_constructors.cc:1688
msgid "Transport the measure of a segment or arc over a line or circle."
msgstr "在一直線或一個圓上取出一線段或一個弧的大小。"

#: misc/special_constructors.cc:1801 objects/special_calcers.cc:24
msgid "Segment to transport"
msgstr "要取樣的線段"

#: misc/special_constructors.cc:1803
msgid "Arc to transport"
msgstr "要取樣的弧"

#: misc/special_constructors.cc:1805
msgid "Value to transport"
msgstr "要轉換的值"

#: misc/special_constructors.cc:1807
msgid "Transport a measure on this line"
msgstr "在此直線上取線段長度"

#: misc/special_constructors.cc:1809 objects/special_calcers.cc:22
msgid "Transport a measure on this circle"
msgstr "在此圓上取弧的大小"

#: misc/special_constructors.cc:1813
msgid "Start transport from this point of the circle"
msgstr "從圓上的這個點開始取"

#: misc/special_constructors.cc:1815
msgid "Start transport from this point of the line"
msgstr "從直線上的這個點開始取"

#: misc/special_constructors.cc:1817
msgid "Start transport from this point of the curve"
msgstr "從曲線上的這個點開始取"

#: misc/special_constructors.cc:1830
msgid "Select a segment, arc or numeric label to be transported..."
msgstr "選擇要傳送的線段、弧線或數值標籤..."

#: misc/special_constructors.cc:1834
msgid "Select a destination line or circle..."
msgstr "選擇目的線條或圓..."

#: misc/special_constructors.cc:1838
msgid "Choose a starting point on the line/circle..."
msgstr "選擇線條或圓上的起始點..."

#: misc/special_constructors.cc:1879 objects/intersection_types.cc:36
msgid "Intersect with this conic"
msgstr "與此二次曲線相交"

#: misc/special_constructors.cc:1881 misc/special_constructors.cc:1890
#: objects/intersection_types.cc:32
msgid "Intersect with this line"
msgstr "與此直線相交"

#: misc/special_constructors.cc:1888 objects/intersection_types.cc:155
#: objects/intersection_types.cc:223
msgid "Intersect with this cubic"
msgstr "與此三次曲線相交"

#: misc/special_constructors.cc:1897 misc/special_constructors.cc:1899
#: objects/intersection_types.cc:471 objects/intersection_types.cc:473
msgid "Intersect with this circle"
msgstr "與此圓相交"

#: misc/special_constructors.cc:1905
msgid "Intersect"
msgstr "交點"

#: misc/special_constructors.cc:1906
msgid "The intersection of two objects"
msgstr "兩個物件的交點"

#: misc/special_constructors.cc:2007
msgid "Intersect this Circle"
msgstr "此圓"

#: misc/special_constructors.cc:2009
msgid "Intersect this Conic"
msgstr "此二次曲線"

#: misc/special_constructors.cc:2011
msgid "Intersect this Segment"
msgstr "此線段"

#: misc/special_constructors.cc:2013
msgid "Intersect this Half-line"
msgstr "此半線"

#: misc/special_constructors.cc:2015
msgid "Intersect this Line"
msgstr "此直線"

#: misc/special_constructors.cc:2017
msgid "Intersect this Cubic Curve"
msgstr "此三次曲線"

#: misc/special_constructors.cc:2019
msgid "Intersect this Arc"
msgstr "此弧"

#: misc/special_constructors.cc:2021
msgid "Intersect this Polygon"
msgstr "此多邊形"

#: misc/special_constructors.cc:2023
msgid "Intersect this Polygonal"
msgstr "此多邊形"

#: misc/special_constructors.cc:2028
msgid "with this Circle"
msgstr "與此圓相交"

#: misc/special_constructors.cc:2030
msgid "with this Conic"
msgstr "與此二次曲線相交"

#: misc/special_constructors.cc:2032
msgid "with this Segment"
msgstr "與此線段相交"

#: misc/special_constructors.cc:2034
msgid "with this Half-line"
msgstr "與此半線相交"

#: misc/special_constructors.cc:2036
msgid "with this Line"
msgstr "與此直線相交"

#: misc/special_constructors.cc:2038
msgid "with this Cubic Curve"
msgstr "與此三次曲線相交"

#: misc/special_constructors.cc:2040
msgid "with this Arc"
msgstr "與此弧相交"

#: misc/special_constructors.cc:2042
msgid "with this Polygon"
msgstr "與此多邊形相交"

#: misc/special_constructors.cc:2044
msgid "with this Polygonal"
msgstr "與此多邊形相交"

#: misc/special_constructors.cc:2054
msgid "Construct Midpoint of This Point and Another One"
msgstr "建構此點和另外一點的中點"

#: misc/special_constructors.cc:2055
msgid ""
"Select the first of the points of which you want to construct the midpoint..."
msgstr "選擇建構中點的第一點..."

#: misc/special_constructors.cc:2056
msgid "Construct the midpoint of this point and another one"
msgstr "建構此點和另外一點的中點"

#: misc/special_constructors.cc:2057
msgid "Select the other of the points of which to construct the midpoint..."
msgstr "選擇建構中點的另外一點..."

#: misc/special_constructors.cc:2167
msgid "Select the first object to intersect..."
msgstr "選擇相交的第一個物件..."

#: misc/special_constructors.cc:2169
msgid "Select the second object to intersect..."
msgstr "選擇相交的第二個物件..."

#: misc/special_constructors.cc:2174
msgid "Tangent"
msgstr "切線"

#: misc/special_constructors.cc:2175
msgid "The line tangent to a curve"
msgstr "曲線的切線"

#: misc/special_constructors.cc:2217
msgid "Tangent to This Circle"
msgstr "此圓的切線"

#: misc/special_constructors.cc:2219
msgid "Tangent to This Conic"
msgstr "此二次曲線的切線"

#: misc/special_constructors.cc:2221
msgid "Tangent to This Arc"
msgstr "此弧的切線"

#: misc/special_constructors.cc:2223
msgid "Tangent to This Cubic Curve"
msgstr "此三次曲線的切線"

#: misc/special_constructors.cc:2225
msgid "Tangent to This Curve"
msgstr "此曲線的切線"

#: misc/special_constructors.cc:2227
msgid "Tangent at This Point"
msgstr "於此點的切線"

#: misc/special_constructors.cc:2248
msgid "Center Of Curvature"
msgstr "曲率中心"

#: misc/special_constructors.cc:2249
msgid "The center of the osculating circle to a curve"
msgstr "曲線的曲率中心"

#: misc/special_constructors.cc:2284
msgid "Center of Curvature of This Conic"
msgstr "此二次曲線的曲率中心"

#: misc/special_constructors.cc:2286
msgid "Center of Curvature of This Cubic Curve"
msgstr "此三次曲線的曲率中心"

#: misc/special_constructors.cc:2288
msgid "Center of Curvature of This Curve"
msgstr "此曲線的曲率中心"

#: misc/special_constructors.cc:2290
msgid "Center of Curvature at This Point"
msgstr "於此點的曲率中心"

#: misc/unit.cc:121
msgctxt "Translators: Pixel"
msgid "pixel"
msgstr "像素"

#: misc/unit.cc:122
msgctxt "Translators: Centimeter"
msgid "cm"
msgstr "公分"

#: misc/unit.cc:123
msgctxt "Translators: Inch"
msgid "in"
msgstr "英吋"

#: modes/construct_mode.cc:266 modes/normal.cc:280
msgid "Which object?"
msgstr "哪個物件？"

#: modes/construct_mode.cc:302
msgid ""
"Click the location where you want to place the new point, or the curve that "
"you want to attach it to..."
msgstr "點選您要放置新點的位置，或是您要附加的曲線..."

#: modes/construct_mode.cc:480
msgid "Now select the location for the result label."
msgstr "現在選擇結果標籤的位置。"

#: modes/edittype.cc:38
msgid "Edit Type"
msgstr "編輯類型"

#: modes/edittype.cc:49
msgid "Here you can edit the name of the current macro type."
msgstr "您可在此編輯目前巨集類型的名稱。"

#: modes/edittype.cc:52
msgid ""
"Here you can edit the description of the current macro type. This field is "
"optional, so you can also leave this empty: if you do so, then your macro "
"type will have no description."
msgstr ""
"您可以在此編輯目前巨集型態的描述。這個欄位是選擇性的，表示您可以將它留白。"

#: modes/edittype.cc:57
msgid "Use this button to change the icon of the current macro type."
msgstr "使用此按鈕更改目前巨集類型的圖示。"

#: modes/edittype.cc:81
msgid "The name of the macro can not be empty."
msgstr "巨集的名稱不能空白。"

#. i18n: ectx: property (text), widget (QLabel, label)
#: modes/edittypewidget.ui:36
msgid ""
"Here you can modify the name, the description and the icon of this macro "
"type."
msgstr "您可在此修改此巨集類型的名稱、描述和圖示。"

#. i18n: ectx: property (text), widget (QLabel, label_2_3)
#: modes/edittypewidget.ui:73
msgid "Name:"
msgstr "名稱："

#. i18n: ectx: property (text), widget (QLabel, label_2_2_2)
#: modes/edittypewidget.ui:93
msgid "Description:"
msgstr "描述："

#: modes/historydialog.cc:41
msgid "History Browser"
msgstr "歷史瀏覽"

#: modes/historydialog.cc:125
msgid "Start of the construction"
msgstr "開始建構"

#. i18n: ectx: property (text), widget (QLabel, label)
#: modes/historywidget.ui:22
msgid "Description of the current step:"
msgstr "描述目前的步驟："

#. i18n: ectx: property (toolTip), widget (QPushButton, buttonFirst)
#: modes/historywidget.ui:53
msgid "First step"
msgstr "第一步"

#. i18n: ectx: property (toolTip), widget (QPushButton, buttonBack)
#: modes/historywidget.ui:66
msgid "One step back"
msgstr "往回一步"

#. i18n: ectx: property (text), widget (QLabel, label_2)
#: modes/historywidget.ui:82
msgid "/"
msgstr "/"

#. i18n: ectx: property (toolTip), widget (QPushButton, buttonNext)
#: modes/historywidget.ui:96
msgid "One step forward"
msgstr "往後一步"

#. i18n: ectx: property (toolTip), widget (QPushButton, buttonLast)
#: modes/historywidget.ui:109
msgid "Last step"
msgstr "最後一步"

#: modes/label.cc:168 modes/macrowizard.cc:130 modes/typesdialog.cpp:314
msgid "Name"
msgstr "名稱"

#: modes/label.cc:196 modes/popup.cc:538 modes/popup.cc:570
msgid "<unnamed object>"
msgstr "<未命名物件>"

#: modes/label.cc:329
#, c-format
msgid ""
"There are '%n' parts in the text that you have not selected a value for. "
"Please remove them or select enough arguments."
msgstr "文字中有 %n 個部份沒有選取值。請將它們移除，或是選擇足夠的參數。"

#: modes/label.cc:406
#, kde-format
msgid "argument %1"
msgstr "參數 %1"

#: modes/label.cc:435
#, kde-format
msgid "Selecting argument %1"
msgstr "選擇參數 %1"

#: modes/label.cc:546
msgid "Change Label"
msgstr "更改標籤"

#: modes/label.cc:645 objects/text_type.cc:325
msgid "Set Value"
msgstr "設定值"

#: modes/label.cc:645
msgid "Enter value:"
msgstr "輸入值："

#: modes/label.cc:676
msgid "Select the position for the new numeric value..."
msgstr "選擇新數值的位置..."

#: modes/macro.cc:92
msgid ""
"One of the result objects you selected cannot be calculated from the given "
"objects. Kig cannot calculate this macro because of this. Please press Back, "
"and construct the objects in the correct order..."
msgstr ""
"您所選取的結果物件中有一個無法根據給定的物件計算出來。Kig 因此而無法執行此巨"
"集。請按「回去」鍵並重新依正確的順序建構物件..."

#: modes/macro.cc:102
msgid ""
"One of the given objects is not used in the calculation of the resultant "
"objects.  This probably means you are expecting Kig to do something "
"impossible.  Please check the macro and try again."
msgstr ""
"給定的物件中有一個並未用於計算此結果物件。這有可能是您希望 Kig 做到不可能的"
"事。請檢查此巨集並再試一次。"

#: modes/macrowizard.cc:50
msgid "Given Objects"
msgstr "給定物件"

#: modes/macrowizard.cc:57
msgid "Select the \"given\" objects for your new macro and press \"Next\"."
msgstr "為您的新巨集選擇給定物件，然後點選「下一步」。"

#: modes/macrowizard.cc:90
msgid "Final Object"
msgstr "最終物件"

#: modes/macrowizard.cc:97
msgid "Select the final object(s) for your new macro."
msgstr "為您的新巨集選擇最終物件。"

#: modes/macrowizard.cc:131
msgid "Enter a name and description for your new type."
msgstr "給新類型輸入名稱和描述。"

#: modes/macrowizard.cc:139
msgid "&Name:"
msgstr "名稱(&N)："

#: modes/macrowizard.cc:146
msgid "&Description:"
msgstr "描述(&D)："

#: modes/macrowizard.cc:152
msgid "&Icon:"
msgstr "圖示(&I)："

#: modes/macrowizard.cc:174
msgid "Define New Macro"
msgstr "定義一個新的巨集"

#: modes/moving.cc:158
#, kde-format
msgid "Move %1 Object"
msgid_plural "Move %1 Objects"
msgstr[0] "移動 %1 個物件"

#: modes/moving.cc:241
msgid "Redefine Point"
msgstr "重新定義點"

#: modes/popup.cc:200
msgid "Kig Document"
msgstr "Kig 文件"

#: modes/popup.cc:209 modes/popup.cc:1149
#, kde-format
msgid "%1 Object"
msgid_plural "%1 Objects"
msgstr[0] "%1 個物件"

#: modes/popup.cc:251
msgid "&Transform"
msgstr "轉換(&T)"

#: modes/popup.cc:252
msgid "T&est"
msgstr "測試(&E)"

#: modes/popup.cc:253
msgid "Const&ruct"
msgstr "建構(&R)"

#: modes/popup.cc:254
msgid "&Start"
msgstr "開始(&S)"

#: modes/popup.cc:255
msgid "Add Te&xt Label"
msgstr "新增文字標籤(&X)"

#: modes/popup.cc:256
msgid "Set Co&lor"
msgstr "設定顏色(&L)"

#: modes/popup.cc:257
msgid "Set &Pen Width"
msgstr "設定筆寬(&L)..."

#: modes/popup.cc:258
msgid "Set St&yle"
msgstr "設定樣式(&Y)"

#: modes/popup.cc:260
msgid "Set Coordinate S&ystem"
msgstr "設定座標系統(&Y)"

#: modes/popup.cc:352
msgid "Black"
msgstr "黑"

#: modes/popup.cc:353
msgid "Gray"
msgstr "灰"

#: modes/popup.cc:354
msgid "Red"
msgstr "紅"

#: modes/popup.cc:355
msgid "Green"
msgstr "綠"

#: modes/popup.cc:356
msgid "Cyan"
msgstr "青"

#: modes/popup.cc:357
msgid "Yellow"
msgstr "黃"

#: modes/popup.cc:358
msgid "Dark Red"
msgstr "暗紅"

#: modes/popup.cc:382
msgid "&Hide"
msgstr "隱藏(&H)"

#: modes/popup.cc:386
msgid "&Show"
msgstr "顯示(&S)"

#: modes/popup.cc:389
msgid "&Move"
msgstr "移動(&M)"

#. i18n: ectx: property (text), widget (KPushButton, buttonRemove)
#: modes/popup.cc:390 modes/typesdialog.cpp:369 modes/typeswidget.ui:112
msgid "&Delete"
msgstr "刪除(&D)"

#: modes/popup.cc:400
msgid "&Custom Color"
msgstr "自訂顏色(&C)"

#: modes/popup.cc:489
msgid "Set &Name..."
msgstr "設定名稱(&N)..."

#: modes/popup.cc:493
msgid "&Name"
msgstr "名稱(&N)"

#: modes/popup.cc:529 modes/popup.cc:546
msgid "Set Object Name"
msgstr "設定物件名稱"

#: modes/popup.cc:529
msgid "Set Name of this Object:"
msgstr "選擇此物件的名稱："

#: modes/popup.cc:644
msgid "Change Object Color"
msgstr "更改物件顏色"

#: modes/popup.cc:659
msgid "Change Object Width"
msgstr "更改物件寬度"

#: modes/popup.cc:686
msgid "Change Point Style"
msgstr "更改點樣式"

#: modes/popup.cc:698
msgid "Change Object Style"
msgstr "更改物件樣式"

#: modes/popup.cc:784 modes/popup.cc:793 modes/popup.cc:802
msgctxt "More menu items"
msgid "More..."
msgstr "更多..."

#: modes/textlabelwizard.cc:50
msgid "Enter Label Text"
msgstr "輸入標籤文字"

#: modes/textlabelwizard.cc:59
#, kde-format
msgid ""
"Enter the text for your label here and press \"Next\".\n"
"If you want to show variable parts, then put %1, %2, ... at the appropriate "
"places (e.g. \"This segment is %1 units long.\")."
msgstr ""
"在此輸入您的標籤上的文字，並點選「下一步」。\n"
"如果您要顯示變數的部份，則在適當的位置上放入 %1, %2, ...（例如：「這個線段長"
"度為 %1 個單位長。」）"

#: modes/textlabelwizard.cc:69
msgid "Show text in a frame"
msgstr "在框架中顯示文字"

#: modes/textlabelwizard.cc:93 scripting/newscriptwizard.cc:67
msgid "Select Arguments"
msgstr "選擇參數"

#: modes/textlabelwizard.cc:102
msgid ""
"Now select the argument(s) you need.  For every argument, click on it, "
"select an object and a property in the Kig window, and click finish when you "
"are done..."
msgstr ""
"現在來選擇您需要的參數。在每個參數上點擊，在 Kig 視窗中選擇物件與屬性，並在完"
"成後點選「完成」。"

#: modes/textlabelwizard.cc:123
msgid "Construct Label"
msgstr "建構標籤"

#: modes/typesdialog.cpp:130
msgid "Macro"
msgstr "巨集"

#: modes/typesdialog.cpp:313
msgid "Type"
msgstr "類型"

#: modes/typesdialog.cpp:315
msgid "Description"
msgstr "描述"

#: modes/typesdialog.cpp:339
msgid "Manage Types"
msgstr "管理類型"

#. i18n: ectx: property (text), widget (KPushButton, buttonEdit)
#: modes/typesdialog.cpp:368 modes/typeswidget.ui:102
msgid "&Edit..."
msgstr "編輯(&E)..."

#. i18n: ectx: property (text), widget (KPushButton, buttonExport)
#: modes/typesdialog.cpp:371 modes/typeswidget.ui:154
msgid "E&xport..."
msgstr "匯出(&X)..."

#: modes/typesdialog.cpp:426
#, kde-format
msgid "Are you sure you want to delete this type?"
msgid_plural "Are you sure you want to delete these %1 types?"
msgstr[0] "您確定要刪除這 %1 個類型嗎？"

#: modes/typesdialog.cpp:428
msgid "Are You Sure?"
msgstr "您確定嗎？"

#: modes/typesdialog.cpp:451 modes/typesdialog.cpp:466
msgid ""
"*.kigt|Kig Types Files\n"
"*|All Files"
msgstr ""
"*.kigt|Kig 類型檔案\n"
"*|全部檔案"

#: modes/typesdialog.cpp:451
msgid "Export Types"
msgstr "匯出類型"

#: modes/typesdialog.cpp:466
msgid "Import Types"
msgstr "匯入類型"

#: modes/typesdialog.cpp:494
msgid ""
"There is more than one type selected. You can only edit one type at a time. "
"Please select only the type you want to edit and try again."
msgstr ""
"已選取了一個以上的類型。您一次只能編輯其中一個類型。請只選擇您要編輯的類型，"
"並且再試一次。"

#: modes/typesdialog.cpp:497
msgid "More Than One Type Selected"
msgstr "選取了多個類型"

#. i18n: ectx: property (toolTip), widget (QTreeView, typeList)
#: modes/typeswidget.ui:37
msgid "Select types here..."
msgstr "在此選擇類型..."

#. i18n: ectx: property (whatsThis), widget (QTreeView, typeList)
#: modes/typeswidget.ui:40
msgid ""
"This is a list of the current macro types... You can select, edit, delete, "
"export and import them..."
msgstr "這是目前巨集類型的列表，您可以選擇、刪除、匯出、匯入..."

#. i18n: ectx: property (whatsThis), widget (KPushButton, buttonEdit)
#: modes/typeswidget.ui:99
msgid "Edit the selected type."
msgstr "編輯選取的物件。"

#. i18n: ectx: property (whatsThis), widget (KPushButton, buttonRemove)
#: modes/typeswidget.ui:109
msgid "Delete all the selected types in the list."
msgstr "刪除列表中選取的全部類型。"

#. i18n: ectx: property (whatsThis), widget (KPushButton, buttonExport)
#: modes/typeswidget.ui:151
msgid "Export all the selected types to a file."
msgstr "將選取的全部類型匯出為檔案。"

#. i18n: ectx: property (whatsThis), widget (KPushButton, buttonImport)
#: modes/typeswidget.ui:161
msgid "Import macros that are contained in one or more files."
msgstr "匯入包含於一個或多個檔案中的巨集。"

#. i18n: ectx: property (text), widget (KPushButton, buttonImport)
#: modes/typeswidget.ui:164
msgid "&Import..."
msgstr "匯入(&I)..."

#: objects/angle_type.cc:40
msgid "Construct an angle through this point"
msgstr "建構一個通過此點的角"

#: objects/angle_type.cc:45
msgid ""
"Select a point that the first half-line of the angle should go through..."
msgstr "選擇一個點，此角的第一條線會通過此點..."

#: objects/angle_type.cc:46
msgid "Construct an angle at this point"
msgstr "在此點建構一個角"

#: objects/angle_type.cc:47
msgid "Select the point to construct the angle in..."
msgstr "選擇一個點以建構此角..."

#: objects/angle_type.cc:49
msgid ""
"Select a point that the second half-line of the angle should go through..."
msgstr "選擇一個點，此角的第二條線會通過此點..."

#: objects/angle_type.cc:104
msgid "Set Si&ze"
msgstr "設定大小(&Z)"

#: objects/angle_type.cc:148
msgid "Resize Angle"
msgstr "更改角大小"

#: objects/arc_type.cc:47
msgid "Construct an arc starting at this point"
msgstr "建構起於此點的弧"

#: objects/arc_type.cc:52 objects/arc_type.cc:168
msgid "Select the start point of the new arc..."
msgstr "選擇新弧的起點..."

#: objects/arc_type.cc:53
msgid "Construct an arc through this point"
msgstr "建構通過此點的弧"

#: objects/arc_type.cc:54
msgid "Select a point for the new arc to go through..."
msgstr "選擇新弧通過的一點..."

#: objects/arc_type.cc:55
msgid "Construct an arc ending at this point"
msgstr "建構終於此點的弧"

#: objects/arc_type.cc:56
msgid "Select the end point of the new arc..."
msgstr "選擇新戶的終點..."

#: objects/arc_type.cc:165
msgid "Construct an arc with this center"
msgstr "建構以此為圓心的弧"

#: objects/arc_type.cc:166
msgid "Select the center of the new arc..."
msgstr "選擇新弧的圓心..."

#: objects/arc_type.cc:169
msgid "Construct an arc with this angle"
msgstr "建構此角度的弧"

#: objects/arc_type.cc:170
msgid "Select the angle of the new arc..."
msgstr "選擇新弧的角度..."

#: objects/arc_type.cc:225
msgid "Construct a conic arc starting at this point"
msgstr "建構起於此點的二次曲線"

#: objects/arc_type.cc:226
msgid "Select the start point of the new conic arc..."
msgstr "選擇新二次曲線的起點..."

#: objects/arc_type.cc:227
msgid "Construct a conic arc through this point"
msgstr "建構一個通過該點的二次曲線"

#: objects/arc_type.cc:228
msgid "Select a point for the new conic arc to go through..."
msgstr "選擇新的二次曲線要通過的點..."

#: objects/arc_type.cc:229
msgid "Construct a conic arc ending at this point"
msgstr "建構終於此點的二次曲線"

#: objects/arc_type.cc:230
msgid "Select the end point of the new conic arc..."
msgstr "選擇新二次曲線的終點..."

#: objects/arc_type.cc:234
msgid "Construct an conic arc with this center"
msgstr "建構以此為圓心的二次曲線"

#: objects/arc_type.cc:235
msgid "Select the center of the new conic arc..."
msgstr "選擇新二次曲線的圓心..."

#: objects/bezier_imp.cc:136 objects/bezier_imp.cc:434
msgid "Number of control points"
msgstr "控制點數量"

#: objects/bezier_imp.cc:137 objects/bezier_imp.cc:435
msgid "Control polygon"
msgstr "控制多邊形"

#: objects/bezier_imp.cc:138 objects/bezier_imp.cc:436
#: objects/circle_imp.cc:151 objects/conic_imp.cc:88 objects/cubic_imp.cc:293
#: objects/locus_imp.cc:107
msgid "Cartesian Equation"
msgstr "笛卡兒方程式"

#: objects/bezier_imp.cc:222 objects/polygon_imp.cc:336
msgid "Bézier Curve"
msgstr "貝氏曲線"

#: objects/bezier_imp.cc:223
msgid "Select this Bézier Curve"
msgstr "選擇此貝氏曲線"

#: objects/bezier_imp.cc:224
#, kde-format
msgid "Select Bézier Curve %1"
msgstr "選擇貝氏曲線 %1"

#: objects/bezier_imp.cc:225
msgid "Remove a Bézier Curve"
msgstr "刪除貝氏曲線"

#: objects/bezier_imp.cc:226
msgid "Add a Bézier Curve"
msgstr "新增貝氏曲線"

#: objects/bezier_imp.cc:227
msgid "Move a Bézier Curve"
msgstr "移動貝氏曲線"

#: objects/bezier_imp.cc:228
msgid "Attach to this Bézier Curve"
msgstr "附於此貝氏曲線"

#: objects/bezier_imp.cc:229
msgid "Show a Bézier Curve"
msgstr "顯示貝氏曲線"

#: objects/bezier_imp.cc:230
msgid "Hide a Bézier Curve"
msgstr "隱藏貝氏曲線"

#: objects/bezier_imp.cc:240
msgid "Bézier Quadratic"
msgstr "貝氏二次曲線"

#: objects/bezier_imp.cc:241
msgid "Select this Bézier Quadratic"
msgstr "選擇此貝氏二次曲線"

#: objects/bezier_imp.cc:242
#, kde-format
msgid "Select Bézier Quadratic %1"
msgstr "選擇貝氏二次曲線 %1"

#: objects/bezier_imp.cc:243
msgid "Remove a Bézier Quadratic"
msgstr "刪除貝氏二次曲線"

#: objects/bezier_imp.cc:244
msgid "Add a Bézier Quadratic"
msgstr "新增貝氏二次曲線"

#: objects/bezier_imp.cc:245
msgid "Move a Bézier Quadratic"
msgstr "移動貝氏二次曲線"

#: objects/bezier_imp.cc:246
msgid "Attach to this Bézier Quadratic"
msgstr "附於此貝氏二次曲線"

#: objects/bezier_imp.cc:247
msgid "Show a Bézier Quadratic"
msgstr "顯示貝氏二次曲線"

#: objects/bezier_imp.cc:248
msgid "Hide a Bézier Quadratic"
msgstr "隱藏貝氏二次曲線"

#: objects/bezier_imp.cc:258
msgid "Bézier Cubic"
msgstr "貝氏三次立方體"

#: objects/bezier_imp.cc:259
msgid "Select this Bézier Cubic"
msgstr "選擇此貝氏三次立方體"

#: objects/bezier_imp.cc:260
#, kde-format
msgid "Select Bézier Cubic %1"
msgstr "選擇貝氏三次立方體 %1"

#: objects/bezier_imp.cc:261
msgid "Remove a Bézier Cubic"
msgstr "刪除貝氏三次立方體"

#: objects/bezier_imp.cc:262
msgid "Add a Bézier Cubic"
msgstr "新增貝氏三次立方體"

#: objects/bezier_imp.cc:263
msgid "Move a Bézier Cubic"
msgstr "移動貝氏三次立方體"

#: objects/bezier_imp.cc:264
msgid "Attach to this Bézier Cubic"
msgstr "附於此貝氏三次立方體"

#: objects/bezier_imp.cc:265
msgid "Show a Bézier Cubic"
msgstr "顯示貝氏三次立方體"

#: objects/bezier_imp.cc:266
msgid "Hide a Bézier Cubic"
msgstr "隱藏貝氏三次立方體"

#: objects/bezier_imp.cc:520
msgid "Rational Bézier Curve"
msgstr "合理貝氏曲線"

#: objects/bezier_imp.cc:521
msgid "Select this Rational Bézier Curve"
msgstr "選擇此合理貝氏曲線"

#: objects/bezier_imp.cc:522
#, kde-format
msgid "Select Rational Bézier Curve %1"
msgstr "選擇合理貝氏曲線 %1"

#: objects/bezier_imp.cc:523
msgid "Remove a Rational Bézier Curve"
msgstr "刪除合理貝氏曲線"

#: objects/bezier_imp.cc:524
msgid "Add a Rational Bézier Curve"
msgstr "新增合理貝氏曲線"

#: objects/bezier_imp.cc:525
msgid "Move a Rational Bézier Curve"
msgstr "移動合理貝氏曲線"

#: objects/bezier_imp.cc:526
msgid "Attach to this Rational Bézier Curve"
msgstr "附於此合理貝氏曲線"

#: objects/bezier_imp.cc:527
msgid "Show a Rational Bézier Curve"
msgstr "顯示合理貝氏曲線"

#: objects/bezier_imp.cc:528
msgid "Hide a Rational Bézier Curve"
msgstr "隱藏合理貝氏曲線"

#: objects/bezier_imp.cc:538
msgid "Rational Bézier Quadratic"
msgstr "有理貝氏二次曲線"

#: objects/bezier_imp.cc:539
msgid "Select this Rational Bézier Quadratic"
msgstr "選擇此有理貝氏二次曲線"

#: objects/bezier_imp.cc:540
#, kde-format
msgid "Select Rational Bézier Quadratic %1"
msgstr "選擇有理貝氏二次曲線 %1"

#: objects/bezier_imp.cc:541
msgid "Remove a Rational Bézier Quadratic"
msgstr "移除有理貝氏二次曲線"

#: objects/bezier_imp.cc:542
msgid "Add a Rational Bézier Quadratic"
msgstr "新增有理貝氏二次曲線"

#: objects/bezier_imp.cc:543
msgid "Move a Rational Bézier Quadratic"
msgstr "移動有理貝氏二次曲線"

#: objects/bezier_imp.cc:544
msgid "Attach to this Rational Bézier Quadratic"
msgstr "附於此有理貝氏二次曲線"

#: objects/bezier_imp.cc:545
msgid "Show a Rational Bézier Quadratic"
msgstr "顯示有理貝氏二次曲線"

#: objects/bezier_imp.cc:546
msgid "Hide a Rational Bézier Quadratic"
msgstr "隱藏有理貝氏二次曲線"

#: objects/bezier_imp.cc:556
msgid "Rational Bézier Cubic"
msgstr "有理貝氏三次立方體"

#: objects/bezier_imp.cc:557
msgid "Select this Rational Bézier Cubic"
msgstr "選擇此有理貝氏三次立方體"

#: objects/bezier_imp.cc:558
#, kde-format
msgid "Select Rational Bézier Cubic %1"
msgstr "選擇有理貝氏三次立方體 %1"

#: objects/bezier_imp.cc:559
msgid "Remove a Rational Bézier Cubic"
msgstr "移除有理貝氏三次立方體"

#: objects/bezier_imp.cc:560
msgid "Add a Rational Bézier Cubic"
msgstr "新增有理貝氏三次立方體"

#: objects/bezier_imp.cc:561
msgid "Move a Rational Bézier Cubic"
msgstr "移動有理貝氏三次立方體"

#: objects/bezier_imp.cc:562
msgid "Attach to this Rational Bézier Cubic"
msgstr "附於此有理貝氏三次立方體"

#: objects/bezier_imp.cc:563
msgid "Show a Rational Bézier Cubic"
msgstr "顯示有理貝氏三次立方體"

#: objects/bezier_imp.cc:564
msgid "Hide a Rational Bézier Cubic"
msgstr "隱藏有理貝氏三次立方體"

#: objects/bezier_type.cc:40
msgid "Construct a quadratic Bézier curve with this control point"
msgstr "用控制點來二次合理貝氏曲線"

#: objects/bezier_type.cc:41
msgid ""
"Select a point to be a control point of the new quadratic Bézier curve..."
msgstr "選擇新二次貝氏曲線的控制點..."

#: objects/bezier_type.cc:140
msgid "Construct a cubic Bézier curve with this control point"
msgstr "用控制點來建立三次貝氏曲線"

#: objects/bezier_type.cc:141
msgid "Select a point to be a control point of the new cubic Bézier curve..."
msgstr "選擇新三次貝氏曲線的控制點..."

#: objects/bezier_type.cc:358
msgid "Construct a quadratic rational Bézier curve with this control point"
msgstr "用控制點來建立有理貝氏曲線"

#: objects/bezier_type.cc:359 objects/bezier_type.cc:470
msgid ""
"Select three points and three numeric values as weights to construct "
"rational Bézier curve..."
msgstr "選擇三個點與三個數值做為權值，以建立有理貝氏曲線..."

#: objects/bezier_type.cc:360 objects/bezier_type.cc:471
msgid "Select this value as weight"
msgstr "選擇此值做為權值"

#: objects/bezier_type.cc:469
msgid "Construct a cubic rational Bézier curve with this control point"
msgstr "用控制點來建立三次有理貝氏曲線"

#: objects/bogus_imp.cc:338
msgid "Test Result"
msgstr "測試結果"

#: objects/centerofcurvature_type.cc:35 objects/tangent_type.cc:36
msgid "Select the curve..."
msgstr "選擇曲線..."

#: objects/centerofcurvature_type.cc:36
msgid "Select a point on the curve..."
msgstr "選擇曲線上的點..."

#: objects/circle_imp.cc:146 objects/polygon_imp.cc:308
#: objects/polygon_imp.cc:322
msgid "Surface"
msgstr "表面"

#: objects/circle_imp.cc:147
msgid "Circumference"
msgstr "圓週長"

#: objects/circle_imp.cc:148 objects/other_imp.cc:378
msgid "Radius"
msgstr "半徑"

#: objects/circle_imp.cc:149 objects/conic_imp.cc:85 objects/other_imp.cc:377
msgid "Center"
msgstr "圓心"

#: objects/circle_imp.cc:150
msgid "Expanded Cartesian Equation"
msgstr "展開的笛卡兒方程式"

#: objects/circle_imp.cc:152 objects/conic_imp.cc:89
msgid "Polar Equation"
msgstr "極座標方程式"

#: objects/circle_imp.cc:238
#, kde-format
msgid "rho = %1   [centered at %2]"
msgstr "rho = %1   [中心在 %2]"

#: objects/circle_imp.cc:346
msgid "circle"
msgstr "圓"

#: objects/circle_imp.cc:347
msgid "Select this circle"
msgstr "選擇此圓"

#: objects/circle_imp.cc:348
#, kde-format
msgid "Select circle %1"
msgstr "選擇圓 %1"

#: objects/circle_imp.cc:349
msgid "Remove a Circle"
msgstr "刪除圓"

#: objects/circle_imp.cc:350
msgid "Add a Circle"
msgstr "新增圓"

#: objects/circle_imp.cc:351
msgid "Move a Circle"
msgstr "移動圓"

#: objects/circle_imp.cc:352
msgid "Attach to this circle"
msgstr "附於此圓"

#: objects/circle_imp.cc:353
msgid "Show a Circle"
msgstr "顯示圓"

#: objects/circle_imp.cc:354
msgid "Hide a Circle"
msgstr "隱藏圓"

#: objects/circle_type.cc:32
msgid "Construct a circle through this point"
msgstr "建構一個通過該點的圓"

#: objects/circle_type.cc:34
msgid "Construct a circle with this center"
msgstr "建構以此做為圓心的圓"

#: objects/circle_type.cc:39 objects/circle_type.cc:194
msgid "Select the center of the new circle..."
msgstr "選擇新圓的圓心..."

#: objects/circle_type.cc:41 objects/circle_type.cc:75
#: objects/circle_type.cc:77 objects/circle_type.cc:79
msgid "Select a point for the new circle to go through..."
msgstr "選擇新圓要通過的點..."

#: objects/circle_type.cc:195
msgid "With this radius"
msgstr "以此為半徑"

#: objects/circle_type.cc:196
msgid "Select the length of the radius..."
msgstr "選擇半徑長度..."

#: objects/conic_imp.cc:84
msgid "Conic Type"
msgstr "二次曲線類型"

#: objects/conic_imp.cc:86
msgid "First Focus"
msgstr "第一個焦點"

#: objects/conic_imp.cc:87
msgid "Second Focus"
msgstr "第二個焦點"

#: objects/conic_imp.cc:210
msgid "Ellipse"
msgstr "橢圓"

#: objects/conic_imp.cc:212
msgid "Hyperbola"
msgstr "雙曲線"

#: objects/conic_imp.cc:214
msgid "Parabola"
msgstr "拋物線"

#: objects/conic_imp.cc:264
msgid "rho"
msgstr "ρ（rho）"

#: objects/conic_imp.cc:271
msgid "cos theta"
msgstr "cos θ"

#: objects/conic_imp.cc:272
msgid "sin theta"
msgstr "sin θ"

#: objects/conic_imp.cc:274
#, kde-format
msgid "[centered at %1]"
msgstr "【中心在 %1】"

#: objects/conic_imp.cc:384
msgid "conic"
msgstr "二次曲線"

#: objects/conic_imp.cc:385
msgid "Select this conic"
msgstr "選擇此二次曲線"

#: objects/conic_imp.cc:386
#, kde-format
msgid "Select conic %1"
msgstr "選擇二次曲線 %1"

#: objects/conic_imp.cc:387
msgid "Remove a Conic"
msgstr "刪除二次曲線"

#: objects/conic_imp.cc:388
msgid "Add a Conic"
msgstr "新增二次曲線"

#: objects/conic_imp.cc:389
msgid "Move a Conic"
msgstr "移動二次曲線"

#: objects/conic_imp.cc:390
msgid "Attach to this conic"
msgstr "附於此二次曲線"

#: objects/conic_imp.cc:391
msgid "Show a Conic"
msgstr "顯示二次曲線"

#: objects/conic_imp.cc:392
msgid "Hide a Conic"
msgstr "隱藏二次曲線"

#: objects/conic_imp.cc:534
msgid "Supporting Conic"
msgstr "輔助二次曲線"

#: objects/conic_imp.cc:535 objects/line_imp.cc:126 objects/other_imp.cc:385
msgid "First End Point"
msgstr "第一終點"

#: objects/conic_imp.cc:536 objects/line_imp.cc:127 objects/other_imp.cc:386
msgid "Second End Point"
msgstr "第二終點"

#: objects/conic_imp.cc:610
msgid "conic arc"
msgstr "二次曲線"

#: objects/conic_imp.cc:611
msgid "Select this conic arc"
msgstr "選擇此二次曲線"

#: objects/conic_imp.cc:612
#, kde-format
msgid "Select conic arc %1"
msgstr "選擇二次曲線 %1"

#: objects/conic_imp.cc:613
msgid "Remove a Conic Arc"
msgstr "刪除二次曲線"

#: objects/conic_imp.cc:614
msgid "Add a Conic Arc"
msgstr "新增二次曲線"

#: objects/conic_imp.cc:615
msgid "Move a Conic Arc"
msgstr "移動二次曲線"

#: objects/conic_imp.cc:616
msgid "Attach to this conic arc"
msgstr "附於此二次曲線"

#: objects/conic_imp.cc:617
msgid "Show a Conic Arc"
msgstr "顯示二次曲線"

#: objects/conic_imp.cc:618
msgid "Hide a Conic Arc"
msgstr "隱藏二次曲線"

#: objects/conic_types.cc:33 objects/conic_types.cc:87
#: objects/conic_types.cc:221
msgid "Construct a conic through this point"
msgstr "建構一個通過該點的二次曲線"

#: objects/conic_types.cc:38 objects/conic_types.cc:40
#: objects/conic_types.cc:42 objects/conic_types.cc:44
#: objects/conic_types.cc:46 objects/conic_types.cc:88
#: objects/conic_types.cc:222
msgid "Select a point for the new conic to go through..."
msgstr "選擇新的二次曲線要通過的點..."

#: objects/conic_types.cc:83 objects/conic_types.cc:85
msgid "Construct a conic with this asymptote"
msgstr "建構一個以此為漸進線的二次曲線(雙曲線)"

#: objects/conic_types.cc:84
msgid "Select the first asymptote of the new conic..."
msgstr "擇新的二次曲線的第一條漸近線..."

#: objects/conic_types.cc:86
msgid "Select the second asymptote of the new conic..."
msgstr "擇新的二次曲線的第二條漸近線..."

#: objects/conic_types.cc:140
msgid "Construct an ellipse with this focus"
msgstr "建構一個以此點為焦點的橢圓"

#: objects/conic_types.cc:145
msgid "Select the first focus of the new ellipse..."
msgstr "選擇新橢圓的第一個焦點..."

#: objects/conic_types.cc:147
msgid "Select the second focus of the new ellipse..."
msgstr "選擇新橢圓的第二個焦點..."

#: objects/conic_types.cc:148
msgid "Construct an ellipse through this point"
msgstr "建構一個通過此點的橢圓"

#: objects/conic_types.cc:149
msgid "Select a point for the new ellipse to go through..."
msgstr "選擇新橢圓要通過的點..."

#: objects/conic_types.cc:175
msgid "Construct a hyperbola with this focus"
msgstr "建構一個以此點為焦點的雙曲線"

#: objects/conic_types.cc:180
msgid "Select the first focus of the new hyperbola..."
msgstr "選擇新雙曲線的第一個焦點..."

#: objects/conic_types.cc:182
msgid "Select the second focus of the new hyperbola..."
msgstr "選擇新雙曲線的第二個焦點..."

#: objects/conic_types.cc:183 objects/conic_types.cc:417
msgid "Construct a hyperbola through this point"
msgstr "建構一個通過此點的雙曲線"

#: objects/conic_types.cc:184 objects/conic_types.cc:422
#: objects/conic_types.cc:424 objects/conic_types.cc:426
#: objects/conic_types.cc:428
msgid "Select a point for the new hyperbola to go through..."
msgstr "選擇新雙曲線要通過的點..."

#: objects/conic_types.cc:217
msgid "Construct a conic with this line as directrix"
msgstr "以這條線作為準線建構一個二次曲線"

#: objects/conic_types.cc:218
msgid "Select the directrix of the new conic..."
msgstr "選擇新二次曲線的準線..."

#: objects/conic_types.cc:219
msgid "Construct a conic with this point as focus"
msgstr "以此點作為焦點建構一條二次曲線"

#: objects/conic_types.cc:220
msgid "Select the focus of the new conic..."
msgstr "選擇新二次曲線的角度..."

#: objects/conic_types.cc:260
msgid "Construct a parabola through this point"
msgstr "建構一個通過此點的拋物線"

#: objects/conic_types.cc:265 objects/conic_types.cc:267
#: objects/conic_types.cc:269
msgid "Select a point for the new parabola to go through..."
msgstr "選擇新拋物線要通過的點..."

#: objects/conic_types.cc:307
msgid "Construct a polar point wrt. this conic"
msgstr "建構此二次曲線的極點"

#: objects/conic_types.cc:308 objects/conic_types.cc:344
msgid "Select the conic wrt. which you want to construct a polar point..."
msgstr "選擇您要建構極點的二次曲線"

#: objects/conic_types.cc:309
msgid "Construct the polar point of this line"
msgstr "建構此線的極點"

#: objects/conic_types.cc:310 objects/conic_types.cc:346
msgid "Select the line of which you want to construct the polar point..."
msgstr "選擇您要建構極點的直線..."

#: objects/conic_types.cc:343
msgid "Construct a polar line wrt. this conic"
msgstr "建構此二次曲線的極線"

#: objects/conic_types.cc:345
msgid "Construct the polar line of this point"
msgstr "建構此點的極線"

#: objects/conic_types.cc:380
msgid "Construct the directrix of this conic"
msgstr "建構此二次曲線的準線"

#: objects/conic_types.cc:381
msgid "Select the conic of which you want to construct the directrix..."
msgstr "選擇您要建構準線的二次曲線..."

#: objects/conic_types.cc:465
msgid "Construct a parabola with this directrix"
msgstr "以此為準線建構一個拋物線"

#: objects/conic_types.cc:466
msgid "Select the directrix of the new parabola..."
msgstr "選擇新拋物線的準線..."

#: objects/conic_types.cc:467
msgid "Construct a parabola with this focus"
msgstr "建構一個以此點為焦點的拋物線"

#: objects/conic_types.cc:468
msgid "Select the focus of the new parabola..."
msgstr "選擇新拋物線的焦點..."

#: objects/conic_types.cc:505
msgid "Construct the asymptotes of this conic"
msgstr "建構此二次曲線的漸近線"

#: objects/conic_types.cc:506
msgid "Select the conic of which you want to construct the asymptotes..."
msgstr "選擇您要建構漸近線的二次曲線..."

#: objects/conic_types.cc:543
msgid "Construct the radical lines of this conic"
msgstr "建構此二次曲線的公弦"

#: objects/conic_types.cc:548
msgid ""
"Select the first of the two conics of which you want to construct the "
"radical line..."
msgstr "選擇您要建構公弦的第一個二次曲線..."

#: objects/conic_types.cc:550
msgid ""
"Select the other of the two conic of which you want to construct the radical "
"line..."
msgstr "選擇您要建構公弦的第二個二次曲線..."

#: objects/conic_types.cc:669
msgid "Switch Radical Lines"
msgstr "切換公弦"

#: objects/conic_types.cc:685
msgid "Switch Conic Radical Lines"
msgstr "切換二次曲線公弦"

#: objects/cubic_imp.cc:356
msgid "cubic curve"
msgstr "三次曲線"

#: objects/cubic_imp.cc:357
msgid "Select this cubic curve"
msgstr "選擇此三次曲線"

#: objects/cubic_imp.cc:358
#, kde-format
msgid "Select cubic curve %1"
msgstr "選擇三次曲線 %1"

#: objects/cubic_imp.cc:359
msgid "Remove a Cubic Curve"
msgstr "刪除三次曲線"

#: objects/cubic_imp.cc:360
msgid "Add a Cubic Curve"
msgstr "新增三次曲線"

#: objects/cubic_imp.cc:361
msgid "Move a Cubic Curve"
msgstr "移動三次曲線"

#: objects/cubic_imp.cc:362
msgid "Attach to this cubic curve"
msgstr "附於此三次曲線"

#: objects/cubic_imp.cc:363
msgid "Show a Cubic Curve"
msgstr "顯示三次曲線"

#: objects/cubic_imp.cc:364
msgid "Hide a Cubic Curve"
msgstr "隱藏三次曲線"

#: objects/cubic_type.cc:26
msgid "Construct a cubic curve through this point"
msgstr "建構一個通過此點的三次曲線"

#: objects/cubic_type.cc:27
msgid "Select a point for the new cubic to go through..."
msgstr "選擇新三次曲線通過的一點..."

#: objects/curve_imp.cc:31
msgid "curve"
msgstr "曲線"

#: objects/curve_imp.cc:32
msgid "Select this curve"
msgstr "選擇此曲線"

#: objects/curve_imp.cc:33
#, kde-format
msgid "Select curve %1"
msgstr "選擇曲線 %1"

#: objects/curve_imp.cc:34
msgid "Remove a Curve"
msgstr "刪除曲線"

#: objects/curve_imp.cc:35
msgid "Add a Curve"
msgstr "新增曲線"

#: objects/curve_imp.cc:36
msgid "Move a Curve"
msgstr "移動曲線"

#: objects/curve_imp.cc:37
msgid "Attach to this curve"
msgstr "附於此曲線"

#: objects/curve_imp.cc:38
msgid "Show a Curve"
msgstr "顯示曲線"

#: objects/curve_imp.cc:39
msgid "Hide a Curve"
msgstr "隱藏曲線"

#: objects/curve_imp.cc:405
msgid "Possibly trascendental curve"
msgstr "可能的超越曲線"

#: objects/intersection_types.cc:157 objects/intersection_types.cc:158
#: objects/intersection_types.cc:225
msgid "Already computed intersection point"
msgstr "已計算相交點"

#: objects/intersection_types.cc:396
msgid "Intersect with this cubic curve"
msgstr "與此三次曲線相交"

#: objects/intersection_types.cc:523
msgid "Intersect with this arc"
msgstr "與此弧相交"

#: objects/inversion_type.cc:34
msgid "Invert with respect to this circle"
msgstr "以此圓為基準做反演轉換"

#: objects/inversion_type.cc:35
msgid "Select the circle we want to invert against..."
msgstr "選擇要做為反演基準的圓..."

#: objects/inversion_type.cc:40
msgid "Compute the inversion of this object"
msgstr "計算此物件的反演轉換結果"

#: objects/inversion_type.cc:41
msgid "Select the object to invert..."
msgstr "選擇要反演的物件..."

#: objects/inversion_type.cc:292
msgid "Compute the inversion of this point"
msgstr "計算此點的反演轉換結果"

#: objects/inversion_type.cc:293
msgid "Select the point to invert..."
msgstr "選擇要反演的點..."

#: objects/inversion_type.cc:353
msgid "Compute the inversion of this line"
msgstr "計算此直線的反演轉換結果"

#: objects/inversion_type.cc:354
msgid "Select the line to invert..."
msgstr "選擇要反演的直線..."

#: objects/inversion_type.cc:406
msgid "Compute the inversion of this segment"
msgstr "計算此線段的反演轉換結果"

#: objects/inversion_type.cc:407
msgid "Select the segment to invert..."
msgstr "選擇要反演的線段..."

#: objects/inversion_type.cc:497
msgid "Compute the inversion of this circle"
msgstr "計算此圓的反演轉換結果"

#: objects/inversion_type.cc:498
msgid "Select the circle to invert..."
msgstr "選擇要反演的圓..."

#: objects/inversion_type.cc:562
msgid "Compute the inversion of this arc"
msgstr "計算此弧的反演轉換結果"

#: objects/inversion_type.cc:563
msgid "Select the arc to invert..."
msgstr "選擇要反演的弧..."

#: objects/line_imp.cc:97
msgid "Slope"
msgstr "斜率"

#: objects/line_imp.cc:98
msgid "Equation"
msgstr "方程式"

#: objects/line_imp.cc:123 objects/other_imp.cc:215 objects/polygon_imp.cc:335
msgid "Length"
msgstr "長度"

#: objects/line_imp.cc:125 objects/line_imp.cc:195
msgid "Support Line"
msgstr "輔助線"

#: objects/line_imp.cc:196
msgid "End Point"
msgstr "終點"

#: objects/line_imp.cc:523 objects/line_imp.cc:532
msgid "line"
msgstr "直線"

#: objects/line_imp.cc:524
msgid "Select a Line"
msgstr "選擇直線"

#: objects/line_imp.cc:533
msgid "Select this line"
msgstr "選擇此直線"

#: objects/line_imp.cc:534
#, kde-format
msgid "Select line %1"
msgstr "選擇直線 %1"

#: objects/line_imp.cc:535
msgid "Remove a Line"
msgstr "刪除直線"

#: objects/line_imp.cc:536
msgid "Add a Line"
msgstr "新增直線"

#: objects/line_imp.cc:537
msgid "Move a Line"
msgstr "移動直線"

#: objects/line_imp.cc:538
msgid "Attach to this line"
msgstr "附於此直線"

#: objects/line_imp.cc:539
msgid "Show a Line"
msgstr "顯示直線"

#: objects/line_imp.cc:540
msgid "Hide a Line"
msgstr "隱藏直線"

#: objects/line_imp.cc:549
msgid "segment"
msgstr "線段"

#: objects/line_imp.cc:550
msgid "Select this segment"
msgstr "選擇此線段"

#: objects/line_imp.cc:551
#, kde-format
msgid "Select segment %1"
msgstr "選擇線段 %1"

#: objects/line_imp.cc:552
msgid "Remove a Segment"
msgstr "刪除線段"

#: objects/line_imp.cc:553
msgid "Add a Segment"
msgstr "新增線段"

#: objects/line_imp.cc:554
msgid "Move a Segment"
msgstr "移動線段"

#: objects/line_imp.cc:555
msgid "Attach to this segment"
msgstr "附於此線段"

#: objects/line_imp.cc:556
msgid "Show a Segment"
msgstr "顯示線段"

#: objects/line_imp.cc:557
msgid "Hide a Segment"
msgstr "隱藏線段"

#: objects/line_imp.cc:566
msgid "half-line"
msgstr "半線"

#: objects/line_imp.cc:567
msgid "Select this half-line"
msgstr "選擇此半線"

#: objects/line_imp.cc:568
#, kde-format
msgid "Select half-line %1"
msgstr "選擇半線 %1"

#: objects/line_imp.cc:569
msgid "Remove a Half-Line"
msgstr "刪除半線"

#: objects/line_imp.cc:570
msgid "Add a Half-Line"
msgstr "新增半線"

#: objects/line_imp.cc:571
msgid "Move a Half-Line"
msgstr "移動半線"

#: objects/line_imp.cc:572
msgid "Attach to this half-line"
msgstr "附於此半線"

#: objects/line_imp.cc:573
msgid "Show a Half-Line"
msgstr "顯示半線"

#: objects/line_imp.cc:574
msgid "Hide a Half-Line"
msgstr "隱藏半線"

#: objects/line_type.cc:38
msgid "Construct a segment starting at this point"
msgstr "建構起於此點的線段"

#: objects/line_type.cc:39
msgid "Select the start point of the new segment..."
msgstr "選擇新線段的起點..."

#: objects/line_type.cc:40
msgid "Construct a segment ending at this point"
msgstr "建構終於此點的線段"

#: objects/line_type.cc:41
msgid "Select the end point of the new segment..."
msgstr "選擇新線段的終點..."

#: objects/line_type.cc:66
msgid "Construct a line through this point"
msgstr "建構通過此點的一條直線"

#: objects/line_type.cc:71
msgid "Select a point for the line to go through..."
msgstr "選擇直線通過的一點..."

#: objects/line_type.cc:73
msgid "Select another point for the line to go through..."
msgstr "選擇直線通過的另一點..."

#: objects/line_type.cc:98
msgid "Construct a half-line starting at this point"
msgstr "建構起於此點的半線"

#: objects/line_type.cc:103 objects/line_type.cc:301
msgid "Select the start point of the new half-line..."
msgstr "選擇新半線的起點..."

#: objects/line_type.cc:104
msgid "Construct a half-line through this point"
msgstr "建構通過此點的一條半線"

#: objects/line_type.cc:105
msgid "Select a point for the half-line to go through..."
msgstr "選擇半線通過的一點..."

#: objects/line_type.cc:146
msgid "Construct a line parallel to this line"
msgstr "建構平行於此直線的直線"

#: objects/line_type.cc:147
msgid "Select a line parallel to the new line..."
msgstr "選擇平行於新直線的直線..."

#: objects/line_type.cc:148
msgid "Construct the parallel line through this point"
msgstr "建構通過此點的平行線"

#: objects/line_type.cc:149 objects/line_type.cc:182 objects/line_type.cc:261
msgid "Select a point for the new line to go through..."
msgstr "選擇新直線通過的一點..."

#: objects/line_type.cc:179
msgid "Construct a line perpendicular to this line"
msgstr "建構垂直於此直線的直線"

#: objects/line_type.cc:180
msgid "Select a line perpendicular to the new line..."
msgstr "選擇垂直於新直線的直線..."

#: objects/line_type.cc:181
msgid "Construct a perpendicular line through this point"
msgstr "建構通過此點的垂線"

#: objects/line_type.cc:224
msgid "Set &Length..."
msgstr "設定長度(&L)..."

#: objects/line_type.cc:243
msgid "Set Segment Length"
msgstr "設定線段長度"

#: objects/line_type.cc:243
msgid "Choose the new length: "
msgstr "選擇新長度："

#: objects/line_type.cc:251
msgid "Resize Segment"
msgstr "更改線段長度"

#: objects/line_type.cc:258
msgid "Construct a line by this vector"
msgstr "根據此向量建構直線"

#: objects/line_type.cc:259
msgid "Select a vector in the direction of the new line..."
msgstr "選擇新直線方向上的向量..."

#: objects/line_type.cc:298
msgid "Construct a half-line by this vector"
msgstr "根據此向量建構半線"

#: objects/line_type.cc:299
msgid "Select a vector in the direction of the new half-line..."
msgstr "選擇新半線方向上的向量..."

#: objects/locus_imp.cc:204
msgid "locus"
msgstr "軌跡"

#: objects/locus_imp.cc:205
msgid "Select this locus"
msgstr "選擇此軌跡"

#: objects/locus_imp.cc:206
#, kde-format
msgid "Select locus %1"
msgstr "選擇軌跡 %1"

#: objects/locus_imp.cc:207
msgid "Remove a Locus"
msgstr "刪除軌跡"

#: objects/locus_imp.cc:208
msgid "Add a Locus"
msgstr "新增軌跡"

#: objects/locus_imp.cc:209
msgid "Move a Locus"
msgstr "移動軌跡"

#: objects/locus_imp.cc:210
msgid "Attach to this locus"
msgstr "附於此軌跡"

#: objects/locus_imp.cc:211
msgid "Show a Locus"
msgstr "顯示軌跡"

#: objects/locus_imp.cc:212
msgid "Hide a Locus"
msgstr "隱藏軌跡"

#: objects/object_imp.cc:54
msgid "Object Type"
msgstr "物件類型"

#: objects/object_imp.cc:288
msgid "Object"
msgstr "物件"

#: objects/object_imp.cc:289
msgid "Select this object"
msgstr "選擇此物件"

#: objects/object_imp.cc:290
#, kde-format
msgid "Select object %1"
msgstr "選擇物件 %1"

#: objects/object_imp.cc:291
msgid "Remove an object"
msgstr "刪除物件"

#: objects/object_imp.cc:292
msgid "Add an object"
msgstr "新增物件"

#: objects/object_imp.cc:293
msgid "Move an object"
msgstr "移動物件"

#: objects/object_imp.cc:294
msgid "Attach to this object"
msgstr "附於此物件"

#: objects/object_imp.cc:295
msgid "Show an object"
msgstr "顯示物件"

#: objects/object_imp.cc:296
msgid "Hide an object"
msgstr "隱藏物件"

#: objects/other_imp.cc:105 objects/other_imp.cc:381
msgid "Angle in Radians"
msgstr "角度，以弧度為單位"

#: objects/other_imp.cc:106 objects/other_imp.cc:380
msgid "Angle in Degrees"
msgstr "角度，以度為單位"

#: objects/other_imp.cc:216
msgid "Midpoint"
msgstr "中點"

#: objects/other_imp.cc:217
msgid "X length"
msgstr "X 長度"

#: objects/other_imp.cc:218
msgid "Y length"
msgstr "Y 長度"

#: objects/other_imp.cc:219
msgid "Opposite Vector"
msgstr "相反向量"

#: objects/other_imp.cc:379
msgid "Angle"
msgstr "角"

#: objects/other_imp.cc:382
msgid "Sector Surface"
msgstr "扇形表面"

#: objects/other_imp.cc:383
msgid "Arc Length"
msgstr "弧長"

#: objects/other_imp.cc:384
msgid "Support Circle"
msgstr "輔助圓"

#: objects/other_imp.cc:573
msgid "angle"
msgstr "角"

#: objects/other_imp.cc:574
msgid "Select this angle"
msgstr "選擇此角"

#: objects/other_imp.cc:575
#, kde-format
msgid "Select angle %1"
msgstr "選擇角 %1"

#: objects/other_imp.cc:576
msgid "Remove an Angle"
msgstr "刪除角"

#: objects/other_imp.cc:577
msgid "Add an Angle"
msgstr "新增角"

#: objects/other_imp.cc:578
msgid "Move an Angle"
msgstr "移動角"

#: objects/other_imp.cc:579
msgid "Attach to this angle"
msgstr "附於此角"

#: objects/other_imp.cc:580
msgid "Show an Angle"
msgstr "顯示角"

#: objects/other_imp.cc:581
msgid "Hide an Angle"
msgstr "隱藏角"

#: objects/other_imp.cc:589
msgid "vector"
msgstr "向量"

#: objects/other_imp.cc:590
msgid "Select this vector"
msgstr "選擇此向量"

#: objects/other_imp.cc:591
#, kde-format
msgid "Select vector %1"
msgstr "選擇向量 %1"

#: objects/other_imp.cc:592
msgid "Remove a Vector"
msgstr "刪除向量"

#: objects/other_imp.cc:593
msgid "Add a Vector"
msgstr "新增向量"

#: objects/other_imp.cc:594
msgid "Move a Vector"
msgstr "移動向量"

#: objects/other_imp.cc:595
msgid "Attach to this vector"
msgstr "附於此向量"

#: objects/other_imp.cc:596
msgid "Show a Vector"
msgstr "顯示向量"

#: objects/other_imp.cc:597
msgid "Hide a Vector"
msgstr "隱藏向量"

#: objects/other_imp.cc:605
msgid "arc"
msgstr "弧"

#: objects/other_imp.cc:606
msgid "Select this arc"
msgstr "選擇此弧"

#: objects/other_imp.cc:607
#, kde-format
msgid "Select arc %1"
msgstr "選擇弧 %1"

#: objects/other_imp.cc:608
msgid "Remove an Arc"
msgstr "刪除弧"

#: objects/other_imp.cc:609
msgid "Add an Arc"
msgstr "新增弧"

#: objects/other_imp.cc:610
msgid "Move an Arc"
msgstr "移動弧"

#: objects/other_imp.cc:611
msgid "Attach to this arc"
msgstr "附於此弧"

#: objects/other_imp.cc:612
msgid "Show an Arc"
msgstr "隱藏角"

#: objects/other_imp.cc:613
msgid "Hide an Arc"
msgstr "隱藏弧"

#: objects/point_imp.cc:75
msgid "Coordinate"
msgstr "座標"

#: objects/point_imp.cc:76
msgid "X coordinate"
msgstr "X 座標"

#: objects/point_imp.cc:77
msgid "Y coordinate"
msgstr "Y 座標"

#: objects/point_imp.cc:163
msgid "point"
msgstr "點"

#: objects/point_imp.cc:164
msgid "Select this point"
msgstr "選擇此點"

#: objects/point_imp.cc:165
#, kde-format
msgid "Select point %1"
msgstr "選擇點 %1"

#: objects/point_imp.cc:166
msgid "Remove a Point"
msgstr "刪除點"

#: objects/point_imp.cc:167
msgid "Add a Point"
msgstr "新增點"

#: objects/point_imp.cc:168
msgid "Move a Point"
msgstr "移動點"

#: objects/point_imp.cc:169
msgid "Attach to this point"
msgstr "附於此點"

#: objects/point_imp.cc:170
msgid "Show a Point"
msgstr "顯示點"

#: objects/point_imp.cc:171
msgid "Hide a Point"
msgstr "隱藏點"

#: objects/point_type.cc:265 objects/point_type.cc:267
msgid "Construct the midpoint of this point and another point"
msgstr "建構此點與另一個點間的中點"

#: objects/point_type.cc:266
msgid ""
"Select the first of the two points of which you want to construct the "
"midpoint..."
msgstr "選擇您要建構中點的第一個點..."

#: objects/point_type.cc:268
msgid ""
"Select the other of the two points of which you want to construct the "
"midpoint..."
msgstr "選擇您要建構中點的另一個點..."

#: objects/point_type.cc:370
msgid "Set &Coordinate..."
msgstr "設定座標(&C)..."

#: objects/point_type.cc:371 objects/point_type.cc:379
msgid "Redefine"
msgstr "重新定義"

#: objects/point_type.cc:378
msgid "Set &Parameter..."
msgstr "設定參數(&P)..."

#: objects/point_type.cc:401
msgid "Set Coordinate"
msgstr "設定座標"

#: objects/point_type.cc:402
msgid "Enter the new coordinate."
msgstr "輸入新座標。"

#: objects/point_type.cc:443
msgid "Set Point Parameter"
msgstr "設定點參數"

#: objects/point_type.cc:443
msgid "Choose the new parameter: "
msgstr "選擇新參數："

#: objects/point_type.cc:449
msgid "Change Parameter of Constrained Point"
msgstr "變更限制點的參數"

#: objects/point_type.cc:732
msgid "Select the circle on which to transport a measure..."
msgstr "選擇要在哪個圓上取弧..."

#: objects/point_type.cc:734
msgid "Select a point on the circle..."
msgstr "選擇圓上一點..."

#: objects/point_type.cc:736
msgid "Select the segment to transport on the circle..."
msgstr "選擇要在圓上取哪個線段大小"

#: objects/point_type.cc:783
msgid "Select a number/length as x coordinate of the point..."
msgstr "選擇此點的 X 座標的數值或長度..."

#: objects/point_type.cc:785
msgid "Select a number/length as y coordinate of the point..."
msgstr "選擇此點的 Y 座標的數值或長度..."

#: objects/polygon_imp.cc:306 objects/polygon_imp.cc:320
#: objects/polygon_imp.cc:334
msgid "Number of sides"
msgstr "邊數"

#: objects/polygon_imp.cc:307 objects/polygon_imp.cc:321
msgid "Perimeter"
msgstr "週長"

#: objects/polygon_imp.cc:309
msgid "Boundary Polygonal"
msgstr "邊界多邊形"

#: objects/polygon_imp.cc:310
msgid "Open Boundary Polygonal"
msgstr "開放式邊界多邊形"

#: objects/polygon_imp.cc:311 objects/polygon_imp.cc:325
msgid "Center of Mass of the Vertices"
msgstr "頂點的重心"

#: objects/polygon_imp.cc:312 objects/polygon_imp.cc:326
msgid "Winding Number"
msgstr "環繞數"

#: objects/polygon_imp.cc:323
msgid "Inside Polygon"
msgstr "多邊形內部"

#: objects/polygon_imp.cc:324
msgid "Open Polygonal Curve"
msgstr "開放式多邊形曲線"

#: objects/polygon_imp.cc:337
msgid "Associated Polygon"
msgstr "相關多邊形"

#: objects/polygon_imp.cc:338
msgid "Closed Polygonal Curve"
msgstr "封閉式多邊形曲線"

#: objects/polygon_imp.cc:655 objects/polygon_imp.cc:664
msgid "polygon"
msgstr "多邊形"

#: objects/polygon_imp.cc:656 objects/polygon_imp.cc:665
msgid "Select this polygon"
msgstr "選擇此多邊形"

#: objects/polygon_imp.cc:666
#, kde-format
msgid "Select polygon %1"
msgstr "選擇多邊形 %1"

#: objects/polygon_imp.cc:667
msgid "Remove a Polygon"
msgstr "刪除多邊形"

#: objects/polygon_imp.cc:668
msgid "Add a Polygon"
msgstr "新增多邊形"

#: objects/polygon_imp.cc:669
msgid "Move a Polygon"
msgstr "移動多邊形"

#: objects/polygon_imp.cc:670
msgid "Attach to this polygon"
msgstr "附於此多邊形"

#: objects/polygon_imp.cc:671
msgid "Show a Polygon"
msgstr "顯示多邊形"

#: objects/polygon_imp.cc:672
msgid "Hide a Polygon"
msgstr "隱藏多邊形"

#: objects/polygon_imp.cc:682
msgid "closed polygonal curve"
msgstr "封閉式多邊形曲線"

#: objects/polygon_imp.cc:683
msgid "Select this closed polygonal curve"
msgstr "選擇此封閉式多邊形曲線"

#: objects/polygon_imp.cc:684
#, kde-format
msgid "Select closed polygonal curve %1"
msgstr "選擇封閉式多邊形曲線 %1"

#: objects/polygon_imp.cc:685
msgid "Remove a closed polygonal curve"
msgstr "刪除封閉式多邊形曲線"

#: objects/polygon_imp.cc:686
msgid "Add a closed polygonal curve"
msgstr "新增封閉式多邊形曲線"

#: objects/polygon_imp.cc:687
msgid "Move a closed polygonal curve"
msgstr "移動封閉式多邊形曲線"

#: objects/polygon_imp.cc:688
msgid "Attach to this closed polygonal curve"
msgstr "附於此封閉式多邊形曲線"

#: objects/polygon_imp.cc:689
msgid "Show a closed polygonal curve"
msgstr "顯示封閉式多邊形曲線"

#: objects/polygon_imp.cc:690
msgid "Hide a closed polygonal curve"
msgstr "隱藏封閉式多邊形曲線"

#: objects/polygon_imp.cc:700
msgid "polygonal curve"
msgstr "多邊形曲線"

#: objects/polygon_imp.cc:701
msgid "Select this polygonal curve"
msgstr "選擇此多邊形曲線"

#: objects/polygon_imp.cc:702
#, kde-format
msgid "Select polygonal curve %1"
msgstr "選擇多邊形曲線 %1"

#: objects/polygon_imp.cc:703
msgid "Remove a polygonal curve"
msgstr "刪除多邊形曲線"

#: objects/polygon_imp.cc:704
msgid "Add a polygonal curve"
msgstr "新增多邊形曲線"

#: objects/polygon_imp.cc:705
msgid "Move a polygonal curve"
msgstr "移動多邊形曲線"

#: objects/polygon_imp.cc:706
msgid "Attach to this polygonal curve"
msgstr "附於此多邊形曲線"

#: objects/polygon_imp.cc:707
msgid "Show a polygonal curve"
msgstr "顯示多邊形曲線"

#: objects/polygon_imp.cc:708
msgid "Hide a polygonal curve"
msgstr "隱藏多邊形曲線"

#: objects/polygon_imp.cc:718
msgid "triangle"
msgstr "三角形"

#: objects/polygon_imp.cc:719
msgid "Select this triangle"
msgstr "選擇此三角形"

#: objects/polygon_imp.cc:720
#, kde-format
msgid "Select triangle %1"
msgstr "選擇三角形 %1"

#: objects/polygon_imp.cc:721
msgid "Remove a Triangle"
msgstr "刪除三角形"

#: objects/polygon_imp.cc:722
msgid "Add a Triangle"
msgstr "新增三角形"

#: objects/polygon_imp.cc:723
msgid "Move a Triangle"
msgstr "移動三角形"

#: objects/polygon_imp.cc:724
msgid "Attach to this triangle"
msgstr "附於此三角形"

#: objects/polygon_imp.cc:725
msgid "Show a Triangle"
msgstr "顯示三角形"

#: objects/polygon_imp.cc:726
msgid "Hide a Triangle"
msgstr "隱藏三角形"

#: objects/polygon_imp.cc:736
msgid "quadrilateral"
msgstr "四邊形"

#: objects/polygon_imp.cc:737
msgid "Select this quadrilateral"
msgstr "選擇此四邊形"

#: objects/polygon_imp.cc:738
#, kde-format
msgid "Select quadrilateral %1"
msgstr "選擇四邊形 %1"

#: objects/polygon_imp.cc:739
msgid "Remove a Quadrilateral"
msgstr "刪除四邊形"

#: objects/polygon_imp.cc:740
msgid "Add a Quadrilateral"
msgstr "新增四邊形"

#: objects/polygon_imp.cc:741
msgid "Move a Quadrilateral"
msgstr "移動四邊形"

#: objects/polygon_imp.cc:742
msgid "Attach to this quadrilateral"
msgstr "附於此四邊形"

#: objects/polygon_imp.cc:743
msgid "Show a Quadrilateral"
msgstr "顯示四邊形"

#: objects/polygon_imp.cc:744
msgid "Hide a Quadrilateral"
msgstr "隱藏四邊形"

#: objects/polygon_type.cc:38
msgid "Construct a triangle with this vertex"
msgstr "以此頂點建構三角形"

#: objects/polygon_type.cc:39
msgid "Select a point to be a vertex of the new triangle..."
msgstr "選擇新三角形的頂點..."

#: objects/polygon_type.cc:507
msgid "Intersect this polygon with a line"
msgstr "用直線與此多邊形相交"

#: objects/polygon_type.cc:508
msgid "Select the polygon of which you want the intersection with a line..."
msgstr "選擇您要相交的多邊形..."

#: objects/polygon_type.cc:510
msgid "Intersect this line with a polygon"
msgstr "將此直線與多邊形相交"

#: objects/polygon_type.cc:511
msgid "Select the line of which you want the intersection with a polygon..."
msgstr "選擇您要與多邊形相交的直線..."

#: objects/polygon_type.cc:626 objects/polygon_type.cc:658
msgid "Intersect this polygonal curve with a line"
msgstr "用直線與此多邊形曲線相交"

#: objects/polygon_type.cc:627 objects/polygon_type.cc:659
msgid ""
"Select the polygonal curve of which you want the intersection with a line..."
msgstr "選擇您要相交的多邊形曲線..."

#: objects/polygon_type.cc:629 objects/polygon_type.cc:661
msgid "Intersect this line with a polygonal curve"
msgstr "將此直線與多邊形曲線相交"

#: objects/polygon_type.cc:630 objects/polygon_type.cc:662
msgid ""
"Select the line of which you want the intersection with a polygonal curve..."
msgstr "選擇您要與多邊形曲線相交的直線..."

#: objects/polygon_type.cc:828
msgid "Intersect this polygon with another polygon"
msgstr "用此多邊形與另一多邊形相交"

#: objects/polygon_type.cc:829
msgid ""
"Select the polygon of which you want the intersection with another polygon..."
msgstr "選擇您要與其他多邊形相交的多邊形..."

#: objects/polygon_type.cc:830
msgid "Intersect with this polygon"
msgstr "與此多邊形相交"

#: objects/polygon_type.cc:831
msgid "Select the second polygon for the intersection..."
msgstr "選擇相交的第二個多邊形..."

#: objects/polygon_type.cc:977
msgid "Construct the vertices of this polygon"
msgstr "建構此多邊形的頂點"

#: objects/polygon_type.cc:978
msgid "Select the polygon of which you want to construct the vertices..."
msgstr "選擇您要建構頂點的多邊形..."

#: objects/polygon_type.cc:1020
msgid "Construct the sides of this polygon"
msgstr "建構此多邊形的邊"

#: objects/polygon_type.cc:1021
msgid "Select the polygon of which you want to construct the sides..."
msgstr "選擇您要建構邊的多邊形..."

#: objects/polygon_type.cc:1066
msgid "Construct the convex hull of this polygon"
msgstr "建構此多邊形的凸包"

#: objects/polygon_type.cc:1067
msgid "Select the polygon of which you want to construct the convex hull..."
msgstr "選擇您要建構凸包的多邊形..."

#: objects/special_calcers.cc:23
msgid "Project this point onto the circle"
msgstr "將此點投射在圓上"

#: objects/tangent_type.cc:38
msgid "Select the point for the tangent to go through..."
msgstr "選擇切線要經過的點..."

#: objects/tests_type.cc:32
msgid "Is this line parallel?"
msgstr "此直線平行嗎？"

#: objects/tests_type.cc:33
msgid "Select the first of the two possibly parallel lines..."
msgstr "選擇要檢查是否為平行線的第一條線..."

#: objects/tests_type.cc:34
msgid "Parallel to this line?"
msgstr "與此直線平行嗎？"

#: objects/tests_type.cc:35
msgid "Select the other of the two possibly parallel lines..."
msgstr "選擇要檢查是否為平行線的另一條線..."

#: objects/tests_type.cc:63
msgid "These lines are parallel."
msgstr "這些線相互平行。"

#: objects/tests_type.cc:65
msgid "These lines are not parallel."
msgstr "這些線相互不平行。"

#: objects/tests_type.cc:76
msgid "Is this line orthogonal?"
msgstr "此直線垂直嗎？"

#: objects/tests_type.cc:77
msgid "Select the first of the two possibly orthogonal lines..."
msgstr "選擇要檢查是否相互垂直的第一條線..."

#: objects/tests_type.cc:78
msgid "Orthogonal to this line?"
msgstr "與此直線垂直嗎？"

#: objects/tests_type.cc:79
msgid "Select the other of the two possibly orthogonal lines..."
msgstr "選擇要檢查是否相互垂直的另一條線..."

#: objects/tests_type.cc:107
msgid "These lines are orthogonal."
msgstr "這些線相互垂直。"

#: objects/tests_type.cc:109
msgid "These lines are not orthogonal."
msgstr "這些線相互不垂直。"

#: objects/tests_type.cc:120
msgid "Check collinearity of this point"
msgstr "檢查此點的共線性"

#: objects/tests_type.cc:121
msgid "Select the first of the three possibly collinear points..."
msgstr "選擇要檢查是否共線的第一個點..."

#: objects/tests_type.cc:122
msgid "and this second point"
msgstr "與第二個點"

#: objects/tests_type.cc:123
msgid "Select the second of the three possibly collinear points..."
msgstr "選擇要檢查是否共線的第二個點..."

#: objects/tests_type.cc:124
msgid "with this third point"
msgstr "與第三個點"

#: objects/tests_type.cc:125
msgid "Select the last of the three possibly collinear points..."
msgstr "選擇要檢查是否共線的第三個點..."

#: objects/tests_type.cc:154
msgid "These points are collinear."
msgstr "這些點共線。"

#: objects/tests_type.cc:156
msgid "These points are not collinear."
msgstr "這些點不共線。"

#: objects/tests_type.cc:166
msgid "Check whether this point is on a curve"
msgstr "檢查此點是否在曲線上"

#: objects/tests_type.cc:167 objects/tests_type.cc:213
msgid "Select the point you want to test..."
msgstr "選擇您要測試的點"

#: objects/tests_type.cc:168
msgid "Check whether the point is on this curve"
msgstr "檢查此點是否在曲線上"

#: objects/tests_type.cc:169
msgid "Select the curve that the point might be on..."
msgstr "選擇您要檢查的曲線..."

#: objects/tests_type.cc:196
msgid "This curve contains the point."
msgstr "這條曲線通過該點。"

#: objects/tests_type.cc:198
msgid "This curve does not contain the point."
msgstr "這條曲線不通過該點。"

#: objects/tests_type.cc:212
msgid "Check whether this point is in a polygon"
msgstr "檢查此點是否在多邊形上"

#: objects/tests_type.cc:214
msgid "Check whether the point is in this polygon"
msgstr "檢查此點是否在此多邊形上"

#: objects/tests_type.cc:215
msgid "Select the polygon that the point might be in..."
msgstr "選擇您要檢查的多邊形..."

#: objects/tests_type.cc:242
msgid "This polygon contains the point."
msgstr "此點在此多邊形上。"

#: objects/tests_type.cc:244
msgid "This polygon does not contain the point."
msgstr "此點不在此多邊形上。"

#: objects/tests_type.cc:258
msgid "Check whether this polygon is convex"
msgstr "檢查此多邊形是否為凸多邊形"

#: objects/tests_type.cc:259
msgid "Select the polygon you want to test for convexity..."
msgstr "選擇您要檢查的多邊形..."

#: objects/tests_type.cc:285
msgid "This polygon is convex."
msgstr "此多邊形為凸多邊形"

#: objects/tests_type.cc:287
msgid "This polygon is not convex."
msgstr "此多邊形不是凸多邊形"

#: objects/tests_type.cc:301
msgid "Check if this point has the same distance"
msgstr "檢查這些點是否等距"

#: objects/tests_type.cc:302
msgid ""
"Select the point which might have the same distance from two other points..."
msgstr "選擇要檢查是否與其他兩點等距的點..."

#: objects/tests_type.cc:303
msgid "from this point"
msgstr "從此點"

#: objects/tests_type.cc:304
msgid "Select the first of the two other points..."
msgstr "選擇另外兩點中的第一個點..."

#: objects/tests_type.cc:305
msgid "and from this second point"
msgstr "以及從此第二個點"

#: objects/tests_type.cc:306
msgid "Select the other of the two other points..."
msgstr "選擇另外兩點中的第二個點..."

#: objects/tests_type.cc:334
msgid "The two distances are the same."
msgstr "它們等距。"

#: objects/tests_type.cc:336
msgid "The two distances are not the same."
msgstr "它們不等距。"

#: objects/tests_type.cc:346
msgid "Check whether this vector is equal to another vector"
msgstr "檢查此向量是否與另一個向量相等"

#: objects/tests_type.cc:347
msgid "Select the first of the two possibly equal vectors..."
msgstr "選擇要檢查的第一個向量..."

#: objects/tests_type.cc:348
msgid "Check whether this vector is equal to the other vector"
msgstr "檢查此向量是否與另一個向量相等"

#: objects/tests_type.cc:349
msgid "Select the other of the two possibly equal vectors..."
msgstr "選擇要檢查的第二個向量..."

#: objects/tests_type.cc:376
msgid "The two vectors are the same."
msgstr "這兩個向量相等。"

#: objects/tests_type.cc:378
msgid "The two vectors are not the same."
msgstr "這兩個向量不相等。"

#: objects/tests_type.cc:388
msgid "Check whether this object exists"
msgstr "檢查此物件是否存在"

#: objects/tests_type.cc:389
msgid "Select the object for the existence check..."
msgstr "選擇要檢查存在與否的物件..."

#: objects/tests_type.cc:413
msgid "The object exists."
msgstr "此物件存在。"

#: objects/tests_type.cc:415
msgid "The object does not exist."
msgstr "此物件不存在。"

#: objects/text_imp.cc:84
msgid "Text"
msgstr "文字"

#: objects/text_imp.cc:147
msgid "label"
msgstr "標籤"

#: objects/text_imp.cc:148
msgid "Select this label"
msgstr "選擇此標籤"

#: objects/text_imp.cc:149
#, kde-format
msgid "Select label %1"
msgstr "選擇標籤 %1"

#: objects/text_imp.cc:150
msgid "Remove a Label"
msgstr "刪除標籤"

#: objects/text_imp.cc:151
msgid "Add a Label"
msgstr "新增標籤"

#: objects/text_imp.cc:152
msgid "Move a Label"
msgstr "移動標籤"

#: objects/text_imp.cc:153
msgid "Attach to this label"
msgstr "附於此標籤"

#: objects/text_imp.cc:154
msgid "Show a Label"
msgstr "顯示標籤"

#: objects/text_imp.cc:155
msgid "Hide a Label"
msgstr "隱藏標籤"

#: objects/text_imp.cc:193
msgid "numeric label"
msgstr "數值標籤"

#: objects/text_imp.cc:194
msgid "Select this numeric label"
msgstr "選擇此數值標籤"

#: objects/text_imp.cc:195
#, kde-format
msgid "Select numeric label %1"
msgstr "選擇數值標籤 %1"

#: objects/text_imp.cc:196
msgid "Remove a Numeric Label"
msgstr "刪除此數值標籤"

#: objects/text_imp.cc:197
msgid "Add a Numeric Label"
msgstr "新增數值標籤"

#: objects/text_imp.cc:198
msgid "Move a Numeric Label"
msgstr "移動數值標籤"

#: objects/text_imp.cc:199
msgid "Attach to this numeric label"
msgstr "附於此數值標籤"

#: objects/text_imp.cc:200
msgid "Show a Numeric Label"
msgstr "顯示數值標籤"

#: objects/text_imp.cc:201
msgid "Hide a Numeric Label"
msgstr "隱藏數值標籤"

#: objects/text_imp.cc:231 objects/text_imp.cc:323
msgid "Numeric value"
msgstr "數值"

#: objects/text_imp.cc:285
msgid "boolean label"
msgstr "布林值標籤"

#: objects/text_imp.cc:286
msgid "Select this boolean label"
msgstr "選擇此布林值標籤"

#: objects/text_imp.cc:287
#, kde-format
msgid "Select boolean label %1"
msgstr "選擇布林值標籤 %1"

#: objects/text_imp.cc:288
msgid "Remove a Boolean Label"
msgstr "刪除布林值標籤"

#: objects/text_imp.cc:289
msgid "Add a Boolean Label"
msgstr "新增布林值標籤"

#: objects/text_imp.cc:290
msgid "Move a Boolean Label"
msgstr "移動布林值標籤"

#: objects/text_imp.cc:291
msgid "Attach to this boolean label"
msgstr "附於此布林值標籤"

#: objects/text_imp.cc:292
msgid "Show a Boolean Label"
msgstr "顯示布林值標籤"

#: objects/text_imp.cc:293
msgid "Hide a Boolean Label"
msgstr "隱藏布林值標籤"

#: objects/text_type.cc:176
msgid "&Copy Text"
msgstr "複製文字(&C)"

#: objects/text_type.cc:177
msgid "&Toggle Frame"
msgstr "切換框架(&T)"

#: objects/text_type.cc:178
msgid "Set &Font..."
msgstr "設定字型(&F)..."

#: objects/text_type.cc:207
msgid "Toggle Label Frame"
msgstr "切換標籤框架"

#: objects/text_type.cc:219
msgid "Change Label Font"
msgstr "更改標籤字型"

#: objects/text_type.cc:246
msgid "&Redefine..."
msgstr "重新定義(&R)..."

#: objects/text_type.cc:297
msgid "Change &Value..."
msgstr "更改值(&V)..."

#: objects/text_type.cc:325
msgid "Enter the new value:"
msgstr "輸入新值："

#: objects/text_type.cc:330
msgid "Change Displayed Value"
msgstr "改變已顯示的值"

#: objects/transform_types.cc:35
msgid "Translate this object"
msgstr "平移此物件"

#: objects/transform_types.cc:36
msgid "Select the object to translate..."
msgstr "選擇要平移的物件..."

#: objects/transform_types.cc:37
msgid "Translate by this vector"
msgstr "按此向量平移"

#: objects/transform_types.cc:38
msgid "Select the vector to translate by..."
msgstr "選擇平移的向量..."

#: objects/transform_types.cc:70 objects/transform_types.cc:105
msgid "Reflect this object"
msgstr "映射此物件"

#: objects/transform_types.cc:71 objects/transform_types.cc:106
msgid "Select the object to reflect..."
msgstr "選擇要映射的物件..."

#: objects/transform_types.cc:72
msgid "Reflect in this point"
msgstr "映射於此點"

#: objects/transform_types.cc:73
msgid "Select the point to reflect in..."
msgstr "選擇要映射的點..."

#: objects/transform_types.cc:107
msgid "Reflect in this line"
msgstr "映射於此線"

#: objects/transform_types.cc:108
msgid "Select the line to reflect in..."
msgstr "選擇要映射的線..."

#: objects/transform_types.cc:140
msgid "Rotate this object"
msgstr "旋轉此物件"

#: objects/transform_types.cc:141
msgid "Select the object to rotate..."
msgstr "選擇要旋轉的物件..."

#: objects/transform_types.cc:142
msgid "Rotate around this point"
msgstr "以此點為軸旋轉"

#: objects/transform_types.cc:143
msgid "Select the center point of the rotation..."
msgstr "選擇旋轉的中心點..."

#: objects/transform_types.cc:146
msgid "Rotate by this angle"
msgstr "以此角度旋轉"

#: objects/transform_types.cc:147
msgid "Select the angle of the rotation..."
msgstr "選擇旋轉的角度..."

#: objects/transform_types.cc:182 objects/transform_types.cc:223
#: objects/transform_types.cc:272 objects/transform_types.cc:310
msgid "Scale this object"
msgstr "縮放此物件"

#: objects/transform_types.cc:183 objects/transform_types.cc:224
msgid "Select the object to scale..."
msgstr "選擇要縮放的物件..."

#: objects/transform_types.cc:184 objects/transform_types.cc:225
msgid "Scale with this center"
msgstr "以此中心點縮放"

#: objects/transform_types.cc:185 objects/transform_types.cc:226
msgid "Select the center point of the scaling..."
msgstr "選擇要縮放的中心點..."

#: objects/transform_types.cc:188 objects/transform_types.cc:275
msgid "Scale by this length"
msgstr "以此長度縮放"

#: objects/transform_types.cc:189 objects/transform_types.cc:276
msgid ""
"Select a length or a segment whose length is the factor of the scaling..."
msgstr "選擇要用於決定縮放比例的線段長度..."

#: objects/transform_types.cc:231 objects/transform_types.cc:314
msgid "Scale this length..."
msgstr "縮放此長度..."

#: objects/transform_types.cc:232 objects/transform_types.cc:315
msgid ""
"Select the first of two lengths whose ratio is the factor of the scaling..."
msgstr "選擇兩個用於決定縮放比例的線段的第一個..."

#: objects/transform_types.cc:233 objects/transform_types.cc:316
msgid "...to this other length"
msgstr "相對於另一個線段長度"

#: objects/transform_types.cc:234 objects/transform_types.cc:317
msgid ""
"Select the second of two lengths whose ratio is the factor of the scaling..."
msgstr "選擇兩個用於決定縮放比例的線段的第二個..."

#: objects/transform_types.cc:272 objects/transform_types.cc:310
msgid "Select the object to scale"
msgstr "選擇要縮放的物件"

#: objects/transform_types.cc:273 objects/transform_types.cc:311
msgid "Scale over this line"
msgstr "將此直線縮放"

#: objects/transform_types.cc:273 objects/transform_types.cc:311
msgid "Select the line to scale over"
msgstr "選擇要縮放的直線"

#: objects/transform_types.cc:355
msgid "Projectively rotate this object"
msgstr "投影旋轉此物件"

#: objects/transform_types.cc:355
msgid "Select the object to rotate projectively"
msgstr "選擇要做投影旋轉的物件"

#: objects/transform_types.cc:356
msgid "Projectively rotate with this half-line"
msgstr "投影旋轉此半線"

#: objects/transform_types.cc:356
msgid ""
"Select the half line of the projective rotation that you want to apply to "
"the object"
msgstr "選擇要做投影旋轉的半線"

#: objects/transform_types.cc:357
msgid "Projectively rotate by this angle"
msgstr "投影旋轉此角"

#: objects/transform_types.cc:357
msgid ""
"Select the angle of the projective rotation that you want to apply to the "
"object"
msgstr "選擇要做投影旋轉的角"

#: objects/transform_types.cc:392
msgid "Harmonic Homology of this object"
msgstr "此物件的調和同調"

#: objects/transform_types.cc:393 objects/transform_types.cc:430
#: objects/transform_types.cc:472 objects/transform_types.cc:529
#: objects/transform_types.cc:571 objects/transform_types.cc:894
msgid "Select the object to transform..."
msgstr "選擇要轉換的物件..."

#: objects/transform_types.cc:394
msgid "Harmonic Homology with this center"
msgstr "對此中心點做調和同調"

#: objects/transform_types.cc:395
msgid "Select the center point of the harmonic homology..."
msgstr "選擇調和同調的中心點..."

#: objects/transform_types.cc:396
msgid "Harmonic Homology with this axis"
msgstr "對此軸做調和同調"

#: objects/transform_types.cc:397
msgid "Select the axis of the harmonic homology..."
msgstr "選擇調和同調的軸線..."

#: objects/transform_types.cc:429 objects/transform_types.cc:471
msgid "Generic affinity of this object"
msgstr "此物件的一般相似形"

#: objects/transform_types.cc:431
msgid "Map this triangle"
msgstr "映射此三角形"

#: objects/transform_types.cc:432
msgid "Select the triangle that has to be transformed onto a given triangle..."
msgstr "選擇要映射的三角形..."

#: objects/transform_types.cc:433
msgid "onto this other triangle"
msgstr "在此三角形上"

#: objects/transform_types.cc:434
msgid ""
"Select the triangle that is the image by the affinity of the first "
"triangle..."
msgstr "選擇第一個三角形..."

#: objects/transform_types.cc:473
msgid "First of 3 starting points"
msgstr "三個起點的第一個"

#: objects/transform_types.cc:474
msgid ""
"Select the first of the three starting points of the generic affinity..."
msgstr "選擇三個起點中的第一個..."

#: objects/transform_types.cc:475
msgid "Second of 3 starting points"
msgstr "三個起點的第二個"

#: objects/transform_types.cc:476
msgid ""
"Select the second of the three starting points of the generic affinity..."
msgstr "選擇三個起點中的第二個..."

#: objects/transform_types.cc:477
msgid "Third of 3 starting points"
msgstr "三個起點的第三個"

#: objects/transform_types.cc:478
msgid ""
"Select the third of the three starting points of the generic affinity..."
msgstr "選擇三個起點中的第三個..."

#: objects/transform_types.cc:479 objects/transform_types.cc:580
msgid "Transformed position of first point"
msgstr "第一個點的轉換位置"

#: objects/transform_types.cc:480
msgid "Select the first of the three end points of the generic affinity..."
msgstr "選擇三個結束點的第一個..."

#: objects/transform_types.cc:481 objects/transform_types.cc:582
msgid "Transformed position of second point"
msgstr "第二個點的轉換位置"

#: objects/transform_types.cc:482
msgid "Select the second of the three end points of the generic affinity..."
msgstr "選擇三個結束點的第二個..."

#: objects/transform_types.cc:483 objects/transform_types.cc:584
msgid "Transformed position of third point"
msgstr "第三個點的轉換位置"

#: objects/transform_types.cc:484
msgid "Select the third of the three end points of the generic affinity..."
msgstr "選擇三個結束點的第三個..."

#: objects/transform_types.cc:528 objects/transform_types.cc:570
msgid "Generic projective transformation of this object"
msgstr "此物件的一般投射轉換"

#: objects/transform_types.cc:530
msgid "Map this quadrilateral"
msgstr "映射此四邊形"

#: objects/transform_types.cc:531
msgid ""
"Select the quadrilateral that has to be transformed onto a given "
"quadrilateral..."
msgstr "選擇要映射的四邊形..."

#: objects/transform_types.cc:532
msgid "onto this other quadrilateral"
msgstr "在此四邊形上"

#: objects/transform_types.cc:533
msgid ""
"Select the quadrilateral that is the image by the projective transformation "
"of the first quadrilateral..."
msgstr "選擇要映射的第一個四邊形..."

#: objects/transform_types.cc:572
msgid "First of 4 starting points"
msgstr "四個起始點的第一個"

#: objects/transform_types.cc:573
msgid ""
"Select the first of the four starting points of the generic projectivity..."
msgstr "選擇四個起始點的第一個"

#: objects/transform_types.cc:574
msgid "Second of 4 starting points"
msgstr "四個起始點的第二個"

#: objects/transform_types.cc:575
msgid ""
"Select the second of the four starting points of the generic projectivity..."
msgstr "選擇四個起始點的第二個"

#: objects/transform_types.cc:576
msgid "Third of 4 starting points"
msgstr "四個起始點的第三個"

#: objects/transform_types.cc:577
msgid ""
"Select the third of the four starting points of the generic projectivity..."
msgstr "選擇四個起始點的第三個"

#: objects/transform_types.cc:578
msgid "Fourth of 4 starting points"
msgstr "四個起始點的第四個"

#: objects/transform_types.cc:579
msgid ""
"Select the fourth of the four starting points of the generic projectivity..."
msgstr "選擇四個起始點的第四個"

#: objects/transform_types.cc:581
msgid "Select the first of the four end points of the generic projectivity..."
msgstr "選擇四個結束點的第一個..."

#: objects/transform_types.cc:583
msgid "Select the second of the four end points of the generic projectivity..."
msgstr "選擇四個結束點的第二個..."

#: objects/transform_types.cc:585
msgid "Select the third of the four end points of the generic projectivity..."
msgstr "選擇四個結束點的第三個..."

#: objects/transform_types.cc:586
msgid "Transformed position of fourth point"
msgstr "第四個點的轉換位置"

#: objects/transform_types.cc:587
msgid "Select the fourth of the four end points of the generic projectivity..."
msgstr "選擇四個結束點的第四個..."

#: objects/transform_types.cc:631
msgid "Cast the shadow of this object"
msgstr "計算此物件的陰影"

#: objects/transform_types.cc:632
msgid "Select the object of which you want to construct the shadow..."
msgstr "選擇您要建構陰影的物件..."

#: objects/transform_types.cc:633
msgid "Cast a shadow from this light source"
msgstr "計算從此光源產生的陰影"

#: objects/transform_types.cc:634
msgid "Select the light source from which the shadow should originate..."
msgstr "選擇您要產生陰影的光源..."

#: objects/transform_types.cc:636
msgid "Cast a shadow on the horizon represented by this line"
msgstr "計算此直線所表示的水平面投影"

#: objects/transform_types.cc:637
msgid "Select the horizon for the shadow..."
msgstr "選擇投影的水平面..."

#: objects/transform_types.cc:819
msgid "Transform this object"
msgstr "轉換此物件"

#: objects/transform_types.cc:820
msgid "Transform using this transformation"
msgstr "用此轉換法轉換"

#: objects/transform_types.cc:893
msgid "Apply a similitude to this object"
msgstr "產生此物件的相似形"

#: objects/transform_types.cc:895
msgid "Apply a similitude with this center"
msgstr "以此為中心點產生相似形"

#: objects/transform_types.cc:896
msgid "Select the center for the similitude..."
msgstr "選擇中心點..."

#: objects/transform_types.cc:897
msgid "Apply a similitude mapping this point onto another point"
msgstr "利用映射此點到另一個點產生相似形"

#: objects/transform_types.cc:898
msgid "Select the point which the similitude should map onto another point..."
msgstr "選擇要映射的點..."

#: objects/transform_types.cc:899
msgid "Apply a similitude mapping a point onto this point"
msgstr "利用映射某點到這個點產生相似形"

#: objects/transform_types.cc:900
msgid ""
"Select the point onto which the similitude should map the first point..."
msgstr "選擇第一個點要映設到哪個點..."

#: objects/vector_type.cc:26
msgid "Construct a vector from this point"
msgstr "建構起於此點的向量"

#: objects/vector_type.cc:27
msgid "Select the start point of the new vector..."
msgstr "選擇新向量的起點..."

#: objects/vector_type.cc:28
msgid "Construct a vector to this point"
msgstr "建構指向此點的向量"

#: objects/vector_type.cc:29
msgid "Select the end point of the new vector..."
msgstr "選擇新向量的終點..."

#: objects/vector_type.cc:61
msgid "Construct the vector sum of this vector and another one."
msgstr "建構此向量與另一個向量的向量和。"

#: objects/vector_type.cc:62
msgid ""
"Select the first of the two vectors of which you want to construct the sum..."
msgstr "選擇您要建構向量和的第一個向量..."

#: objects/vector_type.cc:63
msgid "Construct the vector sum of this vector and the other one."
msgstr "建構此向量與另一個向量的向量和。"

#: objects/vector_type.cc:64
msgid ""
"Select the other of the two vectors of which you want to construct the sum..."
msgstr "選擇您要建構向量和的另一個向量..."

#: objects/vector_type.cc:65
msgid "Construct the vector sum starting at this point."
msgstr "建構由這個點開始的向量和。"

#: objects/vector_type.cc:66
msgid "Select the point to construct the sum vector in..."
msgstr "選擇要建構向量和的點..."

#: scripting/newscriptwizard.cc:63
msgid "New Script"
msgstr "新增文稿"

#: scripting/newscriptwizard.cc:73
msgid ""
"Select the argument objects (if any)\n"
"in the Kig window and press \"Next\"."
msgstr "在 Kig 視窗中選擇參數物件（如果有的話），然後點選「下一步」。"

#: scripting/newscriptwizard.cc:79
msgid "Enter Code"
msgstr "輸入代碼"

#: scripting/script-common.cc:35
msgid "Now fill in the code:"
msgstr "現在填入代碼："

#: scripting/script-common.cc:36
msgid "Now fill in the Python code:"
msgstr "現在填入 Python 程式碼："

#: scripting/script-common.cc:54
#, kde-format
msgctxt ""
"Note to translators: this should be a default name for an argument in a "
"Python function. The default is \"arg%1\" which would become arg1, arg2, "
"etc. Give something which seems appropriate for your language."
msgid "arg%1"
msgstr "arg%1"

#: scripting/script_mode.cc:207
msgid ""
"The Python interpreter caught an error during the execution of your script. "
"Please fix the script and click the Finish button again."
msgstr ""
"Python 直譯器在執行您的文稿時發生了錯誤。請修正文稿，再點選「完成」按鈕。"

#: scripting/script_mode.cc:209 scripting/script_mode.cc:351
#, kde-format
msgid ""
"The Python Interpreter generated the following error output:\n"
"%1"
msgstr ""
"Python 直譯器產生了下列錯誤輸出：\n"
"%1"

#: scripting/script_mode.cc:214
msgid ""
"There seems to be an error in your script. The Python interpreter reported "
"no errors, but the script does not generate a valid object. Please fix the "
"script, and click the Finish button again."
msgstr ""
"在您的文稿中似乎有錯誤。Python 直譯器回報沒有錯誤，但是文稿並未產生合法的物"
"件。請修正此文稿，再點選「完成」按鈕。"

#: scripting/script_mode.cc:317
msgctxt "'Edit' is a verb"
msgid "Edit Script"
msgstr "編輯文稿"

#: scripting/script_mode.cc:339
msgid "Edit Python Script"
msgstr "編輯 Python 文稿"

#: scripting/script_mode.cc:349
msgid ""
"The Python interpreter caught an error during the execution of your script. "
"Please fix the script."
msgstr "Python 直譯器在執行您的文稿時發生了錯誤。請修正文稿。"

#: scripting/script_mode.cc:356
msgid ""
"There seems to be an error in your script. The Python interpreter reported "
"no errors, but the script does not generate a valid object. Please fix the "
"script."
msgstr ""
"在您的文稿中似乎有錯誤。Python 直譯器回報沒有錯誤，但是文稿並未產生合法的物"
"件。請修正此文稿。"

#. i18n: ectx: @info:tipoftheday
#: tips:2
msgid ""
"<p>You can control a kig construction by means of a \"pykig\" \n"
"python script, that can be executed with the command \n"
"<code>pykig.py</code>.  Here is a nice example \n"
"(<code>hexagons.kpy</code>) you can try:\n"
"<code><pre>\n"
"kigdocument.hideobjects()\n"
"def hexagons (c, v, n):\n"
"  hexagon = PolygonBCV (c, v, 6)\n"
"  if n &lt;= 0:\n"
"    hexagon.show()\n"
"    for i in range(6): \n"
"      PolygonSide (hexagon, i, True)\n"
"    return\n"
"  cnew = MidPoints (c, v)\n"
"  hexagons (cnew, v, n-1)\n"
"  for k in [2,4]:\n"
"    v1 = PolygonVertex (hexagon, k)\n"
"    cnew = MidPoints (c, v1)\n"
"    hexagons (cnew, v1, n-1)\n"
"hexagons (Point(0,0), Point(1,0), 5)\n"
"</pre></code>\n"
msgstr ""
"<p>您可以用 Pykig 這個 python 文稿來控制建構 kig，只要執行：\n"
"<code>pykig.py</code> 即可。這裡有一個不錯的範例：\n"
"（<code>hexagons.kpy</code>）：\n"
"<code><pre>\n"
"kigdocument.hideobjects()\n"
"def hexagons (c, v, n):\n"
"  hexagon = PolygonBCV (c, v, 6)\n"
"  if n &lt;= 0:\n"
"    hexagon.show()\n"
"    for i in range(6): \n"
"      PolygonSide (hexagon, i, True)\n"
"    return\n"
"  cnew = MidPoints (c, v)\n"
"  hexagons (cnew, v, n-1)\n"
"  for k in [2,4]:\n"
"    v1 = PolygonVertex (hexagon, k)\n"
"    cnew = MidPoints (c, v1)\n"
"    hexagons (cnew, v1, n-1)\n"
"hexagons (Point(0,0), Point(1,0), 5)\n"
"</pre></code>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:28
msgid ""
"<p>You can repeat the latest construction simply by pressing the key\n"
"'Z'; this comes in very handy if you need to construct a sequence\n"
"of objects with the same construction, especially if there is\n"
"no shortcut for that construction.</p>\n"
msgstr ""
"<p>您可以按 Z 鍵來輕易地重覆上次的建構動作，如果您需要用同樣的方法建構一系列"
"的物件，這樣就很方便。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:37
msgid ""
"<p>One of the most powerful tools in Kig are the menus that you can\n"
"enter by right-clicking on an object, or on some empty space in the\n"
"document.  You can use them to give objects names, change their colors\n"
"and line styles, and lots of other interesting things.</p>\n"
msgstr ""
"<p>Kig 中最強大的工具之一，就是您在物件上或檔案空白處點選右鍵所出現的選單。您"
"可以用此選單來命名物件，修改物件的顏色與線條樣式，還有許多有趣的東西。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:46
msgid ""
"<p>You can construct new points without using the menu or the toolbar, "
"simply\n"
"clicking somewhere on the Kig document with the <em>middle mouse\n"
"button</em>.</p>\n"
msgstr ""
"<p>您要建構新的點的話，不需要跑到選單裡去找，或使用工具列。只要在 Kig 檔案中"
"的某處點選滑鼠中鍵即可。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:54
msgid ""
"<p>Kig can open several file formats: its files (<code>.kig</code> files),\n"
"<em>KGeo</em> files, <em>KSeg</em> files, and, partially, <em>Dr. Geo</em>\n"
"and <em>Cabri&#8482;</em> files.</p>\n"
msgstr ""
"<p>Kig 可以開啟幾種不同的檔案格式：它本身的檔案（<code>.kig</code> 檔），"
"<em>KGeo</em> 檔，<em>KSeg</em> 檔，還有一部份的 <em>Dr. Geo</em> 與 "
"<em>Cabri&#8482;</em> 檔。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:62
msgid ""
"<p>Kig has more than 20 objects and 10 transformations with more than 80 \n"
"constructions you can use in your documents: open the <em>Objects</em> \n"
"menu to see them all.</p>\n"
msgstr ""
"<p>在 Kig 中有超過 20 種物件與 10 種以上的轉換，您可以建構 80 個以上的物件。"
"您只要在檔案中選取「物件」選單就可以看到。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:70
msgid ""
"<p>You can use the selected objects to start the construction of an object\n"
"which requires the selected objects as arguments. For example, if you have "
"two\n"
"points selected, you can choose <em>Start->Circle by Three Points</em> from "
"the\n"
"popup menu to start constructing a circle by three points.</p>\n"
msgstr ""
"若是建構物件時需要現有物件做為參數，您可以選取該物件後再來建構新物件。例如，"
"您選取兩個點，然後在彈出式選單中選取「開始」->「用三點決定圓」，就可以開始建"
"構一個圓。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:79
msgid ""
"<p>Kig can extends its object set using external macros. You can find some\n"
"interesting macros on the Kig website:\n"
"<a href=\"http://edu.kde.org/kig\">http://edu.kde.org/kig</a>.</p>\n"
msgstr ""
"<p>Kig 可以使用外部巨集來延伸它的物件集。您可以在 Kig 網站 <a href=\"http://"
"edu.kde.org/kig\">http://edu.kde.org/kig</a> 中找到一些有趣的巨集。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:87
msgid ""
"<p>If you have more than one object under the mouse, and you want to select "
"any\n"
"of them, you can click with the <em>left mouse button</em>, while holding "
"the\n"
"<em>Shift</em> key, to get a list of the objects under the mouse cursor "
"which\n"
"you can then select from.</p>\n"
msgstr ""
"<p>如果在滑鼠下有一個以上的物件，而您想要選取其中一個，您可以按住 <em>Shift</"
"em> 鍵，再點選滑鼠左鍵，就會出現一個在滑鼠游標下的物件清單讓您選擇。</p>\n"

#. i18n: ectx: @info:tipoftheday
#: tips:96
msgid ""
"<p>When you construct a locus, you can click on it with the <em>right</em> "
"mouse\n"
"button and select <em>cartesian equation</em> to see its cartesian "
"equation, \n"
"whenever it is an algebraic curve of low degree.</p>\n"
msgstr ""
"<p>當您建構軌跡時，只要它是較低次數的代數曲線，您可以用滑鼠右鍵點擊它，並選擇"
"觀看它的「笛卡兒方程式」。</p>\n"

#~ msgid "Construct a cubic with this control point"
#~ msgstr "以此控制點建立立方體"

#~ msgid "Select a point to be a control point of the new cubic..."
#~ msgstr "選擇新的立方體的控制點..."

#~ msgid "Construct a rational cubic with this control point"
#~ msgstr "以此控制點建立有理立方體"

#~ msgid ""
#~ "Select three points and three numeric values as weights to construct "
#~ "rational cubic..."
#~ msgstr "選擇三個點與三個數值做為權值，以建立有理立方體..."

#~ msgid "Construct a quadric with this control point"
#~ msgstr "以此控制點來建構二次曲面"

#~ msgid "Select a point to be a control point of the new quadric..."
#~ msgstr "選擇新的二次曲面的控制點..."

#~ msgid "Construct a rational quadric with this control point"
#~ msgstr "以此控制點來建構有理二次曲面"

#~ msgid ""
#~ "Select three points and three numeric values as weights to construct "
#~ "rational quadric..."
#~ msgstr "選擇三個點與三個數值做為權值，以建立有理二次曲面..."

#, fuzzy
#~| msgid "Hide a Curve"
#~ msgid "Bezier Curve"
#~ msgstr "隱藏曲線"

#, fuzzy
#~| msgid "Construct a polygon with this vertex"
#~ msgid "Construct a open polygon (polyline) with this vertex"
#~ msgstr "以此頂點建構一個多邊形"

#, fuzzy
#~| msgid "Select a point to be a vertex of the new polygon..."
#~ msgid "Select a point to be a vertex of the new open polygon..."
#~ msgstr "選擇點做為新多邊形的頂點"

#, fuzzy
#~| msgid "Construct a polygon with this vertex"
#~ msgid "Construct a polygon with this control point"
#~ msgstr "以此頂點建構一個多邊形"

#~ msgid "%1 Objects"
#~ msgstr "%1 個物件"

#~ msgid "&Help"
#~ msgstr "說明(&H)"