| 69
|
|
|
Dmitrijs Ledkovs |
3.2.5-5ubuntu2 |
11 years ago
|
 |
|
| 68
|
|
* Implement plymouth hooks for degraded RAID questions. (LP: #1102499)
* Merged Intel Matrix Storage initramfs support.
* Merge from Debian, remaining delta is still the same:
- Call checks in local-premount to avoid race condition with udev
and opening a degraded array.
- debian/initramfs/local-premount: add call wait_for_udev to wait a
little longer for RAID devices to appear (LP: #942106)
- d/initramfs/mdadm-functions: Record in /run when boot-degraded
question has been asked so that it is only asked once
- pass --test to mdadm to enable result codes for degraded arrays.
- debian/control: we need udev and util-linux in the right version. We
also remove the build dependency from quilt and docbook-to-man as both
are not used in Ubuntus mdadm.
- debian/initramfs/hook: kept the Ubuntus version for handling the absence
of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
- debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
- debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
unused startall script
- debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
instead. Resolved merge conflict by keeping Ubuntu's version.
- debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
boot-degraded enablement; maintain udev starting of RAID devices;
init-premount hook script for the initramfs, to provide information at
boot
- debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
- debian/rules: Kept Ubuntus version for installing apport hooks, not
installing un-used startall script.
- debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
installer changes
- debian/presubj: Dropped this unused bug reporting file. Instead use
source_mdadm.py act as an apport hook for bug handling.
- d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
incrementally adds mdadm member when detected. Starting such an
array in degraded mode is possible by mdadm -IRs. Using mdadm
-ARs without stopping the array first does nothing when no
mdarray-unassociated device is available. Using mdadm -IRs to
start a previously partially assembled array through incremental
mode. Keeping the mdadm -ARs for assembling arrays which were for
some reason not assembled through incremental mode (i.e through
mdadm's udev rule).
- udev-md-raid.rules to not auto-start arrays based on detection
of ddf or isw (imsm) signatures; this conflicts with dmraid usage in
precise and requires more analysis before it can be enabled in SRU.
* Merged in Debian:
- Copy udev rule from /etc/udev/rules.d/ as well as the
/lib/udev/rules.d/, to allow local administrator to override mdadm
rules file.
|
Dmitrijs Ledkovs |
3.2.5-5ubuntu1 |
11 years ago
|
|
|
| 67
|
|
|
Dmitrijs Ledkovs |
3.2.5-1ubuntu3 |
11 years ago
|
|
|
| 66
|
|
|
Dmitrijs Ledkovs |
3.2.5-1ubuntu2 |
11 years ago
|
|
|
| 65
|
|
* Merge from Debian testing. (LP: #920324) Remaining changes:
- Call checks in local-premount to avoid race condition with udev
and opening a degraded array.
- d/initramfs/mdadm-functions: Record in /run when boot-degraded
question has been asked so that it is only asked once
- pass --test to mdadm to enable result codes for degraded arrays.
- debian/control: we need udev and util-linux in the right version. We
also remove the build dependency from quilt and docbook-to-man as both
are not used in Ubuntus mdadm.
- debian/initramfs/hook: kept the Ubuntus version for handling the absence
of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
- debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
- debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
unused startall script
- debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
instead. Resolved merge conflict by keeping Ubuntu's version.
- debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
boot-degraded enablement; maintain udev starting of RAID devices;
init-premount hook script for the initramfs, to provide information at
boot
- debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
- debian/rules: Kept Ubuntus version for installing apport hooks, not
installing un-used startall script.
- debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
installer changes
- debian/presubj: Dropped this unused bug reporting file. Instead use
source_mdadm.py act as an apport hook for bug handling.
- d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
incrementally adds mdadm member when detected. Starting such an
array in degraded mode is possible by mdadm -IRs. Using mdadm
-ARs without stopping the array first does nothing when no
mdarray-unassociated device is available. Using mdadm -IRs to
start a previously partially assembled array through incremental
mode. Keeping the mdadm -ARs for assembling arrays which were for
some reason not assembled through incremental mode (i.e through
mdadm's udev rule).
* Additional Ubuntu changes:
- debian/initramfs/local-premount: add call wait_for_udev to wait a
little longer for RAID devices to appear (LP: #942106)
* Dropped Ubuntu changes:
- Build udeb with -O2 on ppc64, working around a link error. Builds
fine without it on debian.
- rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so
that the rules file ends up with a more reasonable name. debian/rules
changes for adding ubuntu's udev rule corresponding to mdadm. As we
are now using 'upstream' udev rules see 3.2.3-2ubuntu2.
* Changes to Ubuntu changes:
- debian/source_mdadm.py: make apport hook python 2 and 3 compatible
(LP: #1013171).
* New upstream release closes this bugs:
- mdadm --detail --scan segfaults during update-initramfs (LP: #969384)
|
Dmitrijs Ledkovs |
3.2.5-1ubuntu1 |
11 years ago
|
|
|
| 64
|
|
|
Dmitrijs Ledkovs |
3.2.3-2ubuntu2 |
11 years ago
|
|
|
| 63
|
|
* Merge from Debian testing. (LP: #920324) Remaining changes:
- Call checks in local-premount to avoid race condition with udev
and opening a degraded array.
- d/initramfs/mdadm-functions: Record in /run when boot-degraded
question has been asked so that it is only asked once
- pass --test to mdadm to enable result codes for degraded arrays.
- Build udeb with -O2 on ppc64, working around a link error.
- debian/control: we need udev and util-linux in the right version. We
also remove the build dependency from quilt and docbook-to-man as both
are not used in Ubuntus mdadm.
- debian/initramfs/hook: kept the Ubuntus version for handling the absence
of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
- debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
- debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
unused startall script
- debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
instead. Resolved merge conflict by keeping Ubuntu's version.
- debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
boot-degraded enablement; maintain udev starting of RAID devices;
init-premount hook script for the initramfs, to provide information at
boot
- debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
- debian/rules: Kept Ubuntus version for installing apport hooks, not
installing un-used startall script and for adding a udev rule
corresponding to mdadm.
- debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
installer changes
- debian/presubj: Dropped this unused bug reporting file. Instead use
source_mdadm.py act as an apport hook for bug handling.
- rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
the rules file ends up with a more reasonable name
- d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
incrementally adds mdadm member when detected. Starting such an
array in degraded mode is possible by mdadm -IRs. Using mdadm
-ARs without stopping the array first does nothing when no
mdarray-unassociated device is available. Using mdadm -IRs to
start a previously partially assembled array through incremental
mode. Keeping the mdadm -ARs for assembling arrays which were for
some reason not assembled through incremental mode (i.e through
mdadm's udev rule).
|
Clint Byrum |
3.2.3-2ubuntu1 |
12 years ago
|
|
|
| 62
|
|
* Merge from debian unstable. Remaining changes:
- Call checks in local-premount to avoid race condition with udev
and opening a degraded array.
- d/initramfs/mdadm-functions: Record in /run when boot-degraded
question has been asked so that it is only asked once
- pass --test to mdadm to enable result codes for degraded arrays.
- Build udeb with -O2 on ppc64, working around a link error.
- debian/control: we need udev and util-linux in the right version. We
also remove the build dependency from quilt and docbook-to-man as both
are not used in Ubuntus mdadm.
- debian/initramfs/hook: kept the Ubuntus version for handling the absence
of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
- debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
- debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
unused startall script
- debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
instead. Resolved merge conflict by keeping Ubuntu's version.
- debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
boot-degraded enablement; maintain udev starting of RAID devices;
init-premount hook script for the initramfs, to provide information at
boot
- debian/mkconf.in is the older mkconf. Kept the Ubuntu version.
- debian/rules: Kept Ubuntus version for installing apport hooks, not
installing un-used startall script and for adding a udev rule
corresponding to mdadm.
- debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
installer changes
- debian/presubj: Dropped this unused bug reporting file. Instead use
source_mdadm.py act as an apport hook for bug handling.
- rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
the rules file ends up with a more reasonable name
- d/p/debian-changes-3.1.4-1+8efb9d1ubuntu4: mdadm udev rule
incrementally adds mdadm member when detected. Starting such an
array in degraded mode is possible by mdadm -IRs. Using mdadm
-ARs without stopping the array first does nothing when no
mdarray-unassociated device is available. Using mdadm -IRs to
start a previously partially assembled array through incremental
mode. Keeping the mdadm -ARs for assembling arrays which were for
some reason not assembled through incremental mode (i.e through
mdadm's udev rule).
* Disabling -fno-strict-aliasing as according to debian bug 375876 it
has been unnecessary since mdadm 2.5.2
* Dropped changes:
- applied upstream
- d/rules: fix FTBFS by adding -Wno-unused-but-set-variable to
compiler flags until upstream solves the issue. (fixed upstream)
- d/control: add dependency on initscripts >= 2.88dsf-13.3 to ensure
/run exists per http://wiki.debian.org/ReleaseGoals/RunDirectory
(change also done in debian)
* d/rules: add 'man' to build mdadm.8
|
Clint Byrum |
3.2.2-1ubuntu1 |
12 years ago
|
|
|
| 61
|
|
|
Clint Byrum |
3.1.4-1+8efb9d1ubuntu6 |
12 years ago
|
|
|
| 60
|
|
|
Clint Byrum |
3.1.4-1+8efb9d1ubuntu5 |
12 years ago
|
|
|
| 59
|
|
|
Clint Byrum |
3.1.4-1+8efb9d1ubuntu4.1 |
12 years ago
|
|
|
| 58
|
|
|
Surbhi Palande |
3.1.4-1+8efb9d1ubuntu4 |
13 years ago
|
|
|
| 57
|
|
|
Matthias Klose |
3.1.4-1+8efb9d1ubuntu3 |
13 years ago
|
|
|
| 56
|
|
|
Kees Cook |
3.1.4-1+8efb9d1ubuntu2 |
13 years ago
|
|
|
| 55
|
|
* Merge from debian unstable. (LP: #603582)
* Remaining changes
- Assemble.c, config.c: upgraded to the mdadm-3.1.4 version of these files
from Debian.
- debian/control: we need udev and util-linux in the right version. We
also remove the build dependency from quilt and docbook-to-man as both
are not used in Ubuntus mdadm.
- debian/initramfs/hook: kept the Ubuntus version for handling the absence
of active raid arrays in <initramfs>/etc/mdadm/mdadm.conf
- debian/initramfs/script.local-top.DEBIAN, debian/mdadm-startall,
debian/mdadm.raid.DEBIAN: removed. udev does its job now instead.
- debian/mdadm-startall.sgml, debian/mdadm-startall.8: documentation of
unused startall script
- debian/mdadm.config, debian/mdadm.postinst - let udev do the handling
instead. Resolved merge conflict by keeping Ubuntu's version.
- debian/rules: kept debian's switch to using dh_lintian
- debian/mdadm.links, debian/mdadm.manpages: dropped owing to the fact
that these are not used in Ubuntu. Also dropped the build-dep on docbook
to man)
- debian/mdadm.postinst, debian/mdadm.config, initramfs/init-premount:
boot-degraded enablement; maintain udev starting of RAID devices;
init-premount hook script for the initramfs, to provide information at
boot
- debian/mkconf.in is the older mkconf. Kept the Ubuntus version.
- debian/rules: Kept Ubuntus version for installing apport hooks, not
installing un-used startall script and for adding a udev rule
corresponding to mdadm.
- debian/install-rc, check.d/_numbers, check.d/root_on_raid: Ubuntu partman
installer changes
- debian/presubj: Dropped this unused bug reporting file. Instead use
source_mdadm.py act as an apport hook for bug handling.
- rename debian/mdadm.vol_id.udev to debian/mdadm.mdadm-blkid.udev so that
the rules file ends up with a more reasonable name
|
Surbhi Palande |
3.1.4-1+8efb9d1ubuntu1 |
13 years ago
|
|
|
| 54
|
|
|
Surbhi Palande |
2.6.7.1-1ubuntu16 |
13 years ago
|
|
|
| 53
|
|
|
Colin Watson |
2.6.7.1-1ubuntu15 |
14 years ago
|
|
|
| 52
|
|
|
Colin Watson |
2.6.7.1-1ubuntu14 |
14 years ago
|
|
|
| 51
|
|
|
Scott James Remnant |
2.6.7.1-1ubuntu13 |
14 years ago
|
|
|
| 50
|
|
|
Colin Watson |
2.6.7.1-1ubuntu12 |
14 years ago
|
|
|
collapse all