1
# ltmain.sh - Provide generalized library-building support services.
2
# NOTE: Changing this file will not affect anything until you rerun configure.
4
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003
5
# Free Software Foundation, Inc.
6
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
8
# This program is free software; you can redistribute it and/or modify
9
# it under the terms of the GNU General Public License as published by
10
# the Free Software Foundation; either version 2 of the License, or
11
# (at your option) any later version.
13
# This program is distributed in the hope that it will be useful, but
14
# WITHOUT ANY WARRANTY; without even the implied warranty of
15
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16
# General Public License for more details.
18
# You should have received a copy of the GNU General Public License
19
# along with this program; if not, write to the Free Software
20
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
22
# As a special exception to the GNU General Public License, if you
23
# distribute this file as part of a program that contains a
24
# configuration script generated by Autoconf, you may include it under
25
# the same distribution terms that you use for the rest of that program.
27
# Check that we have a working $echo.
28
if test "X$1" = X--no-reexec; then
29
# Discard the --no-reexec flag, and continue.
31
elif test "X$1" = X--fallback-echo; then
32
# Avoid inline document here, it may be left over
34
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then
35
# Yippee, $echo works!
38
# Restart under the correct shell, and then maybe $echo will work.
39
exec $SHELL "$0" --no-reexec ${1+"$@"}
42
if test "X$1" = X--fallback-echo; then
43
# used as fallback echo
51
# The name of this program.
52
progname=`$echo "$0" | ${SED} 's%^.*/%%'`
59
TIMESTAMP=" (1.1240 2003/06/26 06:55:19)"
62
help="Try \`$progname --help' for more information."
63
magic="%%%MAGIC variable%%%"
68
# Sed substitution that helps us do robust quoting. It backslashifies
69
# metacharacters that are still active within double-quoted strings.
70
Xsed="${SED}"' -e 1s/^X//'
71
sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g'
72
# test EBCDIC or ASCII
73
case `echo A|tr A '\301'` in
74
A) # EBCDIC based system
75
SP2NL="tr '\100' '\n'"
76
NL2SP="tr '\r\n' '\100\100'"
78
*) # Assume ASCII based system
79
SP2NL="tr '\040' '\012'"
80
NL2SP="tr '\015\012' '\040\040'"
85
# Only set LANG and LC_ALL to C if already set.
86
# These must not be set unconditionally because not all systems understand
87
# e.g. LANG=C (notably SCO).
88
# We save the old values to restore during execute mode.
89
if test "${LC_ALL+set}" = set; then
90
save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
92
if test "${LANG+set}" = set; then
93
save_LANG="$LANG"; LANG=C; export LANG
96
# Make sure IFS has a sensible default
99
if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
100
$echo "$modename: not configured to build any kind of library" 1>&2
101
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
114
lo2o="s/\\.lo\$/.${objext}/"
115
o2lo="s/\\.${objext}\$/.lo/"
117
#####################################
118
# Shell function definitions:
119
# This seems to be the best place for them
121
# Need a lot of goo to handle *both* DLLs and import libs
122
# Has to be a shell function in order to 'eat' the argument
123
# that is supplied when $file_magic_command is called.
125
win32_libid_type="unknown"
126
win32_fileres=`file -L $1 2>/dev/null`
127
case $win32_fileres in
128
*ar\ archive\ import\ library*) # definitely import
129
win32_libid_type="x86 archive import"
131
*ar\ archive*) # could be an import, or static
132
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \
133
grep -E 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
134
win32_nmres=`eval $NM -f posix -A $1 | \
135
sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`
136
if test "X$win32_nmres" = "Ximport" ; then
137
win32_libid_type="x86 archive import"
139
win32_libid_type="x86 archive static"
144
win32_libid_type="x86 DLL"
146
*executable*) # but shell scripts are "executable" too...
147
case $win32_fileres in
148
*MS\ Windows\ PE\ Intel*)
149
win32_libid_type="x86 DLL"
154
$echo $win32_libid_type
157
# End of Shell function definitions
158
#####################################
160
# Parse our command line options once, thoroughly.
161
while test "$#" -gt 0
167
-*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;
171
# If the previous option needs an argument, assign it.
172
if test -n "$prev"; then
175
execute_dlfiles="$execute_dlfiles $arg"
180
# Check whether tagname contains only valid characters
183
$echo "$progname: invalid tag name: $tagname" 1>&2
190
# Don't test for the "default" C tag, as we know, it's there, but
191
# not specially marked.
194
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then
195
taglist="$taglist $tagname"
196
# Evaluate the configuration.
197
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`"
199
$echo "$progname: ignoring unknown tag $tagname" 1>&2
214
# Have we seen a non-optional argument yet?
221
$echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"
223
$echo "Copyright (C) 2003 Free Software Foundation, Inc."
224
$echo "This is free software; see the source for copying conditions. There is NO"
225
$echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
230
${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0
231
# Now print the configurations for the tags.
232
for tagname in $taglist; do
233
${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0"
239
$echo "$progname: enabling shell trace mode"
249
if test "$build_libtool_libs" = yes; then
250
$echo "enable shared libraries"
252
$echo "disable shared libraries"
254
if test "$build_old_libs" = yes; then
255
$echo "enable static libraries"
257
$echo "disable static libraries"
262
--finish) mode="finish" ;;
264
--mode) prevopt="--mode" prev=mode ;;
265
--mode=*) mode="$optarg" ;;
267
--preserve-dup-deps) duplicate_deps="yes" ;;
273
--tag) prevopt="--tag" prev=tag ;;
275
set tag "$optarg" ${1+"$@"}
286
$echo "$modename: unrecognized option \`$arg'" 1>&2
298
if test -n "$prevopt"; then
299
$echo "$modename: option \`$prevopt' requires an argument" 1>&2
304
# If this variable is set in any of the actions, the command in it
305
# will be execed at the end. This prevents here-documents from being
306
# left over by shells.
309
if test -z "$show_help"; then
311
# Infer the operation mode.
312
if test -z "$mode"; then
313
$echo "*** Warning: inferring the mode of operation is deprecated." 1>&2
314
$echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2
316
*cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)
328
*db | *dbx | *strace | *truss)
338
# If we have no mode, but dlfiles were specified, then do execute mode.
339
test -n "$execute_dlfiles" && mode=execute
341
# Just use the default operation mode.
342
if test -z "$mode"; then
343
if test -n "$nonopt"; then
344
$echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2
346
$echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2
353
# Only execute mode is allowed to have -dlopen flags.
354
if test -n "$execute_dlfiles" && test "$mode" != execute; then
355
$echo "$modename: unrecognized option \`-dlopen'" 1>&2
360
# Change the help message to a mode-specific one.
362
help="Try \`$modename --help --mode=$mode' for more information."
364
# These modes are in order of execution frequency so that they run quickly.
366
# libtool compile mode
368
modename="$modename: compile"
369
# Get the compilation command and the source file.
371
srcfile="$nonopt" # always keep a non-empty value in "srcfile"
380
# do not "continue". Instead, add this to base_compile
392
# Accept any command-line options.
395
if test -n "$libobj" ; then
396
$echo "$modename: you cannot specify \`-o' more than once" 1>&2
419
arg_mode=arg # the next one goes into the "base_compile" arg list
420
continue # The current "srcfile" will either be retained or
421
;; # replaced later. I would guess that would be a bug.
424
args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`
426
save_ifs="$IFS"; IFS=','
430
# Double-quote args containing other shell metacharacters.
431
# Many Bourne shells cannot handle close brackets correctly
432
# in scan sets, so we specify it separately.
434
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
438
lastarg="$lastarg $arg"
441
lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`
443
# Add the arguments to base_compile.
444
base_compile="$base_compile $lastarg"
449
# Accept the current argument as the source file.
450
# The previous "srcfile" becomes the current argument.
457
esac # case $arg_mode
459
# Aesthetically quote the previous argument.
460
lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`
463
# Double-quote args containing other shell metacharacters.
464
# Many Bourne shells cannot handle close brackets correctly
465
# in scan sets, so we specify it separately.
466
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
467
lastarg="\"$lastarg\""
471
base_compile="$base_compile $lastarg"
476
$echo "$modename: you must specify an argument for -Xcompile"
480
$echo "$modename: you must specify a target with \`-o'" 1>&2
484
# Get the name of the library object.
485
[ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`
489
# Recognize several different file suffixes.
490
# If the user specifies -o file.o, it is replaced with file.lo
500
*.class) xform=class ;;
505
*.java) xform=java ;;
508
libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
511
*.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;
513
$echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2
518
# Infer tagged configuration to use if any are available and
519
# if one wasn't chosen via the "--tag" command line option.
520
# Only attempt this if the compiler in the base compile
521
# command doesn't match the default compiler.
522
if test -n "$available_tags" && test -z "$tagname"; then
523
case $base_compile in
524
# Blanks in the command may have been stripped by the calling shell,
525
# but not from the CC environment variable when configure was run.
526
" $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "*) ;;
527
# Blanks at the start of $base_compile will cause this to fail
528
# if we don't check for them as well.
530
for z in $available_tags; do
531
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
532
# Evaluate the configuration.
533
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
534
case "$base_compile " in
535
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
536
# The compiler in the base compile command matches
537
# the one in the tagged configuration.
538
# Assume this is the tagged configuration we want.
545
# If $tagname still isn't set, then no tagged configuration
546
# was found and let the user know that the "--tag" command
547
# line option must be used.
548
if test -z "$tagname"; then
549
$echo "$modename: unable to infer tagged configuration"
550
$echo "$modename: specify a tag with \`--tag'" 1>&2
553
# $echo "$modename: using $tagname tagged configuration"
559
objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`
560
xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`
561
if test "X$xdir" = "X$obj"; then
566
lobj=${xdir}$objdir/$objname
568
if test -z "$base_compile"; then
569
$echo "$modename: you must specify a compilation command" 1>&2
574
# Delete any leftover library objects.
575
if test "$build_old_libs" = yes; then
576
removelist="$obj $lobj $libobj ${libobj}T"
578
removelist="$lobj $libobj ${libobj}T"
582
trap "$run $rm $removelist; exit 1" 1 2 15
584
# On Cygwin there's no "real" PIC flag so we must build both object types
586
cygwin* | mingw* | pw32* | os2*)
590
if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
591
# non-PIC code in shared libraries is not supported
595
# Calculate the filename of the output object if compiler does
596
# not support -o with -c
597
if test "$compiler_c_o" = no; then
598
output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
599
lockfile="$output_obj.lock"
600
removelist="$removelist $output_obj $lockfile"
601
trap "$run $rm $removelist; exit 1" 1 2 15
608
# Lock this critical section if it is needed
609
# We use this script file to make the link, it avoids creating a new file
610
if test "$need_locks" = yes; then
611
until $run ln "$0" "$lockfile" 2>/dev/null; do
612
$show "Waiting for $lockfile to be removed"
615
elif test "$need_locks" = warn; then
616
if test -f "$lockfile"; then
618
*** ERROR, $lockfile exists and contains:
619
`cat $lockfile 2>/dev/null`
621
This indicates that another process is trying to use the same
622
temporary object file, and libtool could not work around it because
623
your compiler does not support \`-c' and \`-o' together. If you
624
repeat this compilation, it may succeed, by chance, but you had better
625
avoid parallel builds (make -j) in this platform, or get a better
631
$echo $srcfile > "$lockfile"
634
if test -n "$fix_srcfile_path"; then
635
eval srcfile=\"$fix_srcfile_path\"
638
$run $rm "$libobj" "${libobj}T"
640
# Create a libtool object file (analogous to a ".la" file),
641
# but don't create it if we're doing a dry run.
642
test -z "$run" && cat > ${libobj}T <<EOF
643
# $libobj - a libtool object file
644
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
646
# Please DO NOT delete this file!
647
# It is necessary for linking the library.
649
# Name of the PIC object.
652
# Only build a PIC object if we are building libtool libraries.
653
if test "$build_libtool_libs" = yes; then
654
# Without this assignment, base_compile gets emptied.
655
fbsd_hideous_sh_bug=$base_compile
657
if test "$pic_mode" != no; then
658
command="$base_compile $srcfile $pic_flag"
660
# Don't build PIC code
661
command="$base_compile $srcfile"
664
if test ! -d "${xdir}$objdir"; then
665
$show "$mkdir ${xdir}$objdir"
666
$run $mkdir ${xdir}$objdir
668
if test "$status" -ne 0 && test ! -d "${xdir}$objdir"; then
673
if test -z "$output_obj"; then
674
# Place PIC objects in $objdir
675
command="$command -o $lobj"
678
$run $rm "$lobj" "$output_obj"
681
if $run eval "$command"; then :
683
test -n "$output_obj" && $run $rm $removelist
687
if test "$need_locks" = warn &&
688
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
690
*** ERROR, $lockfile contains:
691
`cat $lockfile 2>/dev/null`
693
but it should contain:
696
This indicates that another process is trying to use the same
697
temporary object file, and libtool could not work around it because
698
your compiler does not support \`-c' and \`-o' together. If you
699
repeat this compilation, it may succeed, by chance, but you had better
700
avoid parallel builds (make -j) in this platform, or get a better
707
# Just move the object if needed, then go on to compile the next one
708
if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
709
$show "$mv $output_obj $lobj"
710
if $run $mv $output_obj $lobj; then :
718
# Append the name of the PIC object to the libtool object file.
719
test -z "$run" && cat >> ${libobj}T <<EOF
720
pic_object='$objdir/$objname'
724
# Allow error messages only from the first compilation.
725
suppress_output=' >/dev/null 2>&1'
727
# No PIC object so indicate it doesn't exist in the libtool
729
test -z "$run" && cat >> ${libobj}T <<EOF
735
# Only build a position-dependent object if we build old libraries.
736
if test "$build_old_libs" = yes; then
737
if test "$pic_mode" != yes; then
738
# Don't build PIC code
739
command="$base_compile $srcfile"
741
command="$base_compile $srcfile $pic_flag"
743
if test "$compiler_c_o" = yes; then
744
command="$command -o $obj"
747
# Suppress compiler output if we already did a PIC compilation.
748
command="$command$suppress_output"
749
$run $rm "$obj" "$output_obj"
751
if $run eval "$command"; then :
757
if test "$need_locks" = warn &&
758
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
760
*** ERROR, $lockfile contains:
761
`cat $lockfile 2>/dev/null`
763
but it should contain:
766
This indicates that another process is trying to use the same
767
temporary object file, and libtool could not work around it because
768
your compiler does not support \`-c' and \`-o' together. If you
769
repeat this compilation, it may succeed, by chance, but you had better
770
avoid parallel builds (make -j) in this platform, or get a better
777
# Just move the object if needed
778
if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
779
$show "$mv $output_obj $obj"
780
if $run $mv $output_obj $obj; then :
788
# Append the name of the non-PIC object the libtool object file.
789
# Only append if the libtool object file exists.
790
test -z "$run" && cat >> ${libobj}T <<EOF
791
# Name of the non-PIC object.
792
non_pic_object='$objname'
796
# Append the name of the non-PIC object the libtool object file.
797
# Only append if the libtool object file exists.
798
test -z "$run" && cat >> ${libobj}T <<EOF
799
# Name of the non-PIC object.
805
$run $mv "${libobj}T" "${libobj}"
807
# Unlock the critical section if it was locked
808
if test "$need_locks" != no; then
817
modename="$modename: link"
819
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
820
# It is impossible to link a dll without this setting, and
821
# we shouldn't force the makefile maintainer to figure out
822
# which system we are compiling for in order to pass an extra
823
# flag for every libtool invocation.
826
# FIXME: Unfortunately, there are problems with the above when trying
827
# to make a dll which has undefined symbols, in which case not
828
# even a static library is built. For now, we need to specify
829
# -no-undefined on the libtool link line when we can be certain
830
# that all symbols are satisfied, otherwise we get a static library.
837
libtool_args="$nonopt"
838
base_compile="$nonopt"
839
compile_command="$nonopt"
840
finalize_command="$nonopt"
854
lib_search_path=`pwd`
863
export_symbols_regex=
871
prefer_static_libs=no
884
# We need to know -static, to get the right output filenames.
888
-all-static | -static)
889
if test "X$arg" = "X-all-static"; then
890
if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
891
$echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
893
if test -n "$link_static_flag"; then
894
dlopen_self=$dlopen_self_static
897
if test -z "$pic_flag" && test -n "$link_static_flag"; then
898
dlopen_self=$dlopen_self_static
901
build_libtool_libs=no
903
prefer_static_libs=yes
909
# See if our shared archives depend on static archives.
910
test -n "$old_archive_from_new_cmds" && build_old_libs=yes
912
# Go through the arguments, transforming them on the way.
913
while test "$#" -gt 0; do
915
base_compile="$base_compile $arg"
918
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
919
qarg=\"`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`\" ### testsuite: skip nested quoting test
923
libtool_args="$libtool_args $qarg"
925
# If the previous option needs an argument, assign it.
926
if test -n "$prev"; then
929
compile_command="$compile_command @OUTPUT@"
930
finalize_command="$finalize_command @OUTPUT@"
936
if test "$preload" = no; then
937
# Add the symbol object into the linking commands.
938
compile_command="$compile_command @SYMFILE@"
939
finalize_command="$finalize_command @SYMFILE@"
943
*.la | *.lo) ;; # We handle these cases below.
945
if test "$dlself" = no; then
953
if test "$prev" = dlprefiles; then
955
elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
965
if test "$prev" = dlfiles; then
966
dlfiles="$dlfiles $arg"
968
dlprefiles="$dlprefiles $arg"
976
export_symbols="$arg"
977
if test ! -f "$arg"; then
978
$echo "$modename: symbol file \`$arg' does not exist"
985
export_symbols_regex="$arg"
990
inst_prefix_dir="$arg"
1000
if test -f "$arg"; then
1003
for fil in `cat $save_arg`
1005
# moreargs="$moreargs $fil"
1007
# A libtool-controlled object.
1009
# Check to see that this really is a libtool object.
1010
if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1015
# If there is no directory component, then add one.
1017
*/* | *\\*) . $arg ;;
1021
if test -z "$pic_object" || \
1022
test -z "$non_pic_object" ||
1023
test "$pic_object" = none && \
1024
test "$non_pic_object" = none; then
1025
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
1029
# Extract subdirectory from the argument.
1030
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1031
if test "X$xdir" = "X$arg"; then
1037
if test "$pic_object" != none; then
1038
# Prepend the subdirectory the object is found in.
1039
pic_object="$xdir$pic_object"
1041
if test "$prev" = dlfiles; then
1042
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1043
dlfiles="$dlfiles $pic_object"
1047
# If libtool objects are unsupported, then we need to preload.
1052
# CHECK ME: I think I busted this. -Ossama
1053
if test "$prev" = dlprefiles; then
1054
# Preload the old-style object.
1055
dlprefiles="$dlprefiles $pic_object"
1060
libobjs="$libobjs $pic_object"
1065
if test "$non_pic_object" != none; then
1066
# Prepend the subdirectory the object is found in.
1067
non_pic_object="$xdir$non_pic_object"
1069
# A standard non-PIC object
1070
non_pic_objects="$non_pic_objects $non_pic_object"
1071
if test -z "$pic_object" || test "$pic_object" = none ; then
1072
arg="$non_pic_object"
1076
# Only an error if not doing a dry-run.
1077
if test -z "$run"; then
1078
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
1083
# Extract subdirectory from the argument.
1084
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1085
if test "X$xdir" = "X$arg"; then
1091
pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
1092
non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
1093
libobjs="$libobjs $pic_object"
1094
non_pic_objects="$non_pic_objects $non_pic_object"
1099
$echo "$modename: link input file \`$save_arg' does not exist"
1107
# We need an absolute path.
1109
[\\/]* | [A-Za-z]:[\\/]*) ;;
1111
$echo "$modename: only absolute run-paths are allowed" 1>&2
1115
if test "$prev" = rpath; then
1118
*) rpath="$rpath $arg" ;;
1123
*) xrpath="$xrpath $arg" ;;
1130
compiler_flags="$compiler_flags $qarg"
1132
compile_command="$compile_command $qarg"
1133
finalize_command="$finalize_command $qarg"
1137
linker_flags="$linker_flags $qarg"
1138
compiler_flags="$compiler_flags $wl$qarg"
1140
compile_command="$compile_command $wl$qarg"
1141
finalize_command="$finalize_command $wl$qarg"
1145
linker_flags="$linker_flags $qarg"
1146
compiler_flags="$compiler_flags $qarg"
1148
compile_command="$compile_command $qarg"
1149
finalize_command="$finalize_command $qarg"
1153
eval "$prev=\"\$arg\""
1158
fi # test -n "$prev"
1164
if test -n "$link_static_flag"; then
1165
compile_command="$compile_command $link_static_flag"
1166
finalize_command="$finalize_command $link_static_flag"
1172
# FIXME: remove this flag sometime in the future.
1173
$echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2
1197
-export-symbols | -export-symbols-regex)
1198
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
1199
$echo "$modename: more than one -exported-symbols argument is not allowed"
1202
if test "X$arg" = "X-export-symbols"; then
1215
# The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
1216
# so, if we see these flags be careful not to treat them like -L
1218
case $with_gcc/$host in
1219
no/*-*-irix* | /*-*-irix*)
1220
compile_command="$compile_command $arg"
1221
finalize_command="$finalize_command $arg"
1228
dir=`$echo "X$arg" | $Xsed -e 's/^-L//'`
1229
# We need an absolute path.
1231
[\\/]* | [A-Za-z]:[\\/]*) ;;
1233
absdir=`cd "$dir" && pwd`
1234
if test -z "$absdir"; then
1235
$echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2
1244
deplibs="$deplibs -L$dir"
1245
lib_search_path="$lib_search_path $dir"
1249
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
1250
case :$dllsearchpath: in
1252
*) dllsearchpath="$dllsearchpath:$dir";;
1260
if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
1262
*-*-cygwin* | *-*-pw32* | *-*-beos*)
1263
# These systems don't actually have a C or math library (as such)
1267
# prevent being parsed by the freebsd regexp below
1269
*-*-mingw* | *-*-os2*)
1270
# These systems don't actually have a C library (as such)
1271
test "X$arg" = "X-lc" && continue
1273
*-*-openbsd* | *-*-freebsd*)
1274
# Do not include libc due to us having libc/libc_r.
1275
test "X$arg" = "X-lc" && continue
1277
*-*-rhapsody* | *-*-darwin1.[012])
1278
# Rhapsody C and math libraries are in the System framework
1279
deplibs="$deplibs -framework System"
1282
elif test "X$arg" = "X-lc_r"; then
1285
# prevent being parsed by the freebsd regexp below
1287
*-*-openbsd* | *-*-freebsd*)
1288
# Do not include libc_r directly, use -pthread flag.
1293
deplibs="$deplibs $arg"
1302
# gcc -m* arguments should be passed to the linker via $compiler_flags
1303
# in order to pass architecture information to the linker
1304
# (e.g. 32 vs 64-bit). This may also be accomplished via -Wl,-mfoo
1305
# but this is not reliable with gcc because gcc may use -mfoo to
1306
# select a different linker, different libraries, etc, while
1307
# -Wl,-mfoo simply passes -mfoo to the linker.
1309
# Unknown arguments in both finalize_command and compile_command need
1310
# to be aesthetically quoted because they are evaled later.
1311
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
1313
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1317
compile_command="$compile_command $arg"
1318
finalize_command="$finalize_command $arg"
1319
if test "$with_gcc" = "yes" ; then
1320
compiler_flags="$compiler_flags $arg"
1337
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
1338
# The PATH hackery in wrapper scripts is required on Windows
1339
# in order for the loader to find any dlls it needs.
1340
$echo "$modename: warning: \`-no-install' is ignored for $host" 1>&2
1341
$echo "$modename: warning: assuming \`-no-fast-install' instead" 1>&2
1344
*) no_install=yes ;;
1377
dir=`$echo "X$arg" | $Xsed -e 's/^-R//'`
1378
# We need an absolute path.
1380
[\\/]* | [A-Za-z]:[\\/]*) ;;
1382
$echo "$modename: only absolute run-paths are allowed" 1>&2
1388
*) xrpath="$xrpath $dir" ;;
1394
# The effects of -static are defined in a previous loop.
1395
# We used to do the same as -all-static on platforms that
1396
# didn't have a PIC flag, but the assumption that the effects
1397
# would be equivalent was wrong. It would break on at least
1398
# Digital Unix and AIX.
1418
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'`
1420
save_ifs="$IFS"; IFS=','
1421
for flag in $args; do
1424
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1429
compiler_flags="$compiler_flags $flag"
1432
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
1436
args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'`
1438
save_ifs="$IFS"; IFS=','
1439
for flag in $args; do
1442
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1447
compiler_flags="$compiler_flags $wl$flag"
1448
linker_flags="$linker_flags $flag"
1451
arg=`$echo "X$arg" | $Xsed -e "s/^ //"`
1469
# Some other compiler flag.
1471
# Unknown arguments in both finalize_command and compile_command need
1472
# to be aesthetically quoted because they are evaled later.
1473
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
1475
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1479
add_flags="$add_flags $arg"
1483
# A standard object.
1488
# A libtool-controlled object.
1490
# Check to see that this really is a libtool object.
1491
if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1496
# If there is no directory component, then add one.
1498
*/* | *\\*) . $arg ;;
1502
if test -z "$pic_object" || \
1503
test -z "$non_pic_object" ||
1504
test "$pic_object" = none && \
1505
test "$non_pic_object" = none; then
1506
$echo "$modename: cannot find name of object for \`$arg'" 1>&2
1510
# Extract subdirectory from the argument.
1511
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1512
if test "X$xdir" = "X$arg"; then
1518
if test "$pic_object" != none; then
1519
# Prepend the subdirectory the object is found in.
1520
pic_object="$xdir$pic_object"
1522
if test "$prev" = dlfiles; then
1523
if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
1524
dlfiles="$dlfiles $pic_object"
1528
# If libtool objects are unsupported, then we need to preload.
1533
# CHECK ME: I think I busted this. -Ossama
1534
if test "$prev" = dlprefiles; then
1535
# Preload the old-style object.
1536
dlprefiles="$dlprefiles $pic_object"
1541
libobjs="$libobjs $pic_object"
1546
if test "$non_pic_object" != none; then
1547
# Prepend the subdirectory the object is found in.
1548
non_pic_object="$xdir$non_pic_object"
1550
# A standard non-PIC object
1551
non_pic_objects="$non_pic_objects $non_pic_object"
1552
if test -z "$pic_object" || test "$pic_object" = none ; then
1553
arg="$non_pic_object"
1557
# Only an error if not doing a dry-run.
1558
if test -z "$run"; then
1559
$echo "$modename: \`$arg' is not a valid libtool object" 1>&2
1564
# Extract subdirectory from the argument.
1565
xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'`
1566
if test "X$xdir" = "X$arg"; then
1572
pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"`
1573
non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"`
1574
libobjs="$libobjs $pic_object"
1575
non_pic_objects="$non_pic_objects $non_pic_object"
1582
deplibs="$deplibs $arg"
1583
old_deplibs="$old_deplibs $arg"
1588
# A libtool-controlled library.
1590
if test "$prev" = dlfiles; then
1591
# This library was specified with -dlopen.
1592
dlfiles="$dlfiles $arg"
1594
elif test "$prev" = dlprefiles; then
1595
# The library was specified with -dlpreopen.
1596
dlprefiles="$dlprefiles $arg"
1599
deplibs="$deplibs $arg"
1604
# Some other compiler argument.
1606
# Unknown arguments in both finalize_command and compile_command need
1607
# to be aesthetically quoted because they are evaled later.
1608
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
1610
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
1614
add_flags="$add_flags $arg"
1618
# Now actually substitute the argument into the commands.
1619
if test -n "$arg"; then
1620
compile_command="$compile_command $arg"
1621
finalize_command="$finalize_command $arg"
1623
done # argument parsing loop
1625
if test -n "$prev"; then
1626
$echo "$modename: the \`$prevarg' option requires an argument" 1>&2
1631
# Infer tagged configuration to use if any are available and
1632
# if one wasn't chosen via the "--tag" command line option.
1633
# Only attempt this if the compiler in the base link
1634
# command doesn't match the default compiler.
1635
if test -n "$available_tags" && test -z "$tagname"; then
1636
case $base_compile in
1637
# Blanks in the command may have been stripped by the calling shell,
1638
# but not from the CC environment variable when configure was run.
1639
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*) ;;
1640
# Blanks at the start of $base_compile will cause this to fail
1641
# if we don't check for them as well.
1643
for z in $available_tags; do
1644
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then
1645
# Evaluate the configuration.
1646
eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`"
1647
case $base_compile in
1648
"$CC "* | " $CC "* | "`$echo $CC` "* | " `$echo $CC` "*)
1649
# The compiler in $compile_command matches
1650
# the one in the tagged configuration.
1651
# Assume this is the tagged configuration we want.
1658
# If $tagname still isn't set, then no tagged configuration
1659
# was found and let the user know that the "--tag" command
1660
# line option must be used.
1661
if test -z "$tagname"; then
1662
$echo "$modename: unable to infer tagged configuration"
1663
$echo "$modename: specify a tag with \`--tag'" 1>&2
1666
# $echo "$modename: using $tagname tagged configuration"
1672
if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
1673
eval arg=\"$export_dynamic_flag_spec\"
1674
compile_command="$compile_command $arg"
1675
finalize_command="$finalize_command $arg"
1679
# calculate the name of the file, without its directory
1680
outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'`
1681
libobjs_save="$libobjs"
1683
if test -n "$shlibpath_var"; then
1684
# get the directories listed in $shlibpath_var
1685
eval shlib_search_path=\`\$echo \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
1689
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
1690
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
1692
output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'`
1693
if test "X$output_objdir" = "X$output"; then
1694
output_objdir="$objdir"
1696
output_objdir="$output_objdir/$objdir"
1698
# Create the object directory.
1699
if test ! -d "$output_objdir"; then
1700
$show "$mkdir $output_objdir"
1701
$run $mkdir $output_objdir
1703
if test "$status" -ne 0 && test ! -d "$output_objdir"; then
1708
# Determine the type of output
1711
$echo "$modename: you must specify an output file" 1>&2
1715
*.$libext) linkmode=oldlib ;;
1716
*.lo | *.$objext) linkmode=obj ;;
1717
*.la) linkmode=lib ;;
1718
*) linkmode=prog ;; # Anything else should be a program.
1722
*cygwin* | *mingw* | *pw32*)
1723
# don't eliminate duplcations in $postdeps and $predeps
1724
duplicate_compiler_generated_deps=yes
1727
duplicate_compiler_generated_deps=$duplicate_deps
1733
# Find all interdependent deplibs by searching for libraries
1734
# that are linked more than once (e.g. -la -lb -la)
1735
for deplib in $deplibs; do
1736
if test "X$duplicate_deps" = "Xyes" ; then
1738
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
1741
libs="$libs $deplib"
1744
if test "$linkmode" = lib; then
1745
libs="$predeps $libs $compiler_lib_search_path $postdeps"
1747
# Compute libraries that are listed more than once in $predeps
1748
# $postdeps and mark them as special (i.e., whose duplicates are
1749
# not to be eliminated).
1751
if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then
1752
for pre_post_dep in $predeps $postdeps; do
1753
case "$pre_post_deps " in
1754
*" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;;
1756
pre_post_deps="$pre_post_deps $pre_post_dep"
1765
need_relink=no # whether we're linking any uninstalled libtool libraries
1766
notinst_deplibs= # not-installed libtool libraries
1767
notinst_path= # paths that contain not-installed libtool libraries
1771
for file in $dlfiles $dlprefiles; do
1775
$echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2
1787
passes="conv scan dlopen dlpreopen link"
1792
for pass in $passes; do
1793
if test "$linkmode,$pass" = "lib,link" ||
1794
test "$linkmode,$pass" = "prog,scan"; then
1798
if test "$linkmode" = prog; then
1800
dlopen) libs="$dlfiles" ;;
1801
dlpreopen) libs="$dlprefiles" ;;
1802
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
1805
if test "$pass" = dlopen; then
1806
# Collect dlpreopened libraries
1807
save_deplibs="$deplibs"
1810
for deplib in $libs; do
1815
if test "$linkmode" != lib && test "$linkmode" != prog; then
1816
$echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2
1819
if test "$pass" = conv && test "$allow_undefined" = yes; then
1820
deplibs="$deplib $deplibs"
1823
name=`$echo "X$deplib" | $Xsed -e 's/^-l//'`
1824
for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do
1825
for search_ext in .la $shrext .so .a; do
1826
# Search the libtool library
1827
lib="$searchdir/lib${name}${search_ext}"
1828
if test -f "$lib"; then
1829
if test "$search_ext" = ".la"; then
1838
if test "$found" != yes; then
1839
# deplib doesn't seem to be a libtool library
1840
if test "$linkmode,$pass" = "prog,link"; then
1841
compile_deplibs="$deplib $compile_deplibs"
1842
finalize_deplibs="$deplib $finalize_deplibs"
1844
deplibs="$deplib $deplibs"
1845
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
1848
else # deplib is a libtool library
1849
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
1850
# We need to do some special things here, and not later.
1851
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
1852
case " $predeps $postdeps " in
1854
if (${SED} -e '2q' $lib |
1855
grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
1859
*/* | *\\*) . $lib ;;
1862
for l in $old_library $library_names; do
1865
if test "X$ll" = "X$old_library" ; then # only static version available
1867
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
1868
test "X$ladir" = "X$lib" && ladir="."
1869
lib=$ladir/$old_library
1870
if test "$linkmode,$pass" = "prog,link"; then
1871
compile_deplibs="$deplib $compile_deplibs"
1872
finalize_deplibs="$deplib $finalize_deplibs"
1874
deplibs="$deplib $deplibs"
1875
test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
1889
deplibs="$deplib $deplibs"
1890
test "$pass" = conv && continue
1891
newdependency_libs="$deplib $newdependency_libs"
1892
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
1895
if test "$pass" = conv; then
1896
deplibs="$deplib $deplibs"
1899
if test "$pass" = scan; then
1900
deplibs="$deplib $deplibs"
1901
newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`
1903
compile_deplibs="$deplib $compile_deplibs"
1904
finalize_deplibs="$deplib $finalize_deplibs"
1908
$echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2
1914
if test "$pass" = link; then
1915
dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'`
1916
# Make sure the xrpath contains only unique directories.
1919
*) xrpath="$xrpath $dir" ;;
1922
deplibs="$deplib $deplibs"
1925
*.la) lib="$deplib" ;;
1927
if test "$pass" = conv; then
1928
deplibs="$deplib $deplibs"
1933
if test "$deplibs_check_method" != pass_all; then
1935
$echo "*** Warning: Trying to link with static lib archive $deplib."
1936
$echo "*** I have the capability to make that library automatically link in when"
1937
$echo "*** you link to this library. But I can only do this if you have a"
1938
$echo "*** shared version of the library, which you do not appear to have"
1939
$echo "*** because the file extensions .$libext of this argument makes me believe"
1940
$echo "*** that it is just a static archive that I should not used here."
1943
$echo "*** Warning: Linking the shared library $output against the"
1944
$echo "*** static library $deplib is not portable!"
1945
deplibs="$deplib $deplibs"
1950
if test "$pass" != link; then
1951
deplibs="$deplib $deplibs"
1953
compile_deplibs="$deplib $compile_deplibs"
1954
finalize_deplibs="$deplib $finalize_deplibs"
1961
if test "$pass" = conv; then
1962
deplibs="$deplib $deplibs"
1963
elif test "$linkmode" = prog; then
1964
if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
1965
# If there is no dlopen support or we're linking statically,
1966
# we need to preload.
1967
newdlprefiles="$newdlprefiles $deplib"
1968
compile_deplibs="$deplib $compile_deplibs"
1969
finalize_deplibs="$deplib $finalize_deplibs"
1971
newdlfiles="$newdlfiles $deplib"
1981
if test "$found" = yes || test -f "$lib"; then :
1983
$echo "$modename: cannot find the library \`$lib'" 1>&2
1987
# Check to see that this really is a libtool archive.
1988
if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
1990
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
1994
ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'`
1995
test "X$ladir" = "X$lib" && ladir="."
2003
# If the library was installed with an old release of libtool,
2004
# it will not redefine variables installed, or shouldnotlink
2010
*/* | *\\*) . $lib ;;
2014
if test "$linkmode,$pass" = "lib,link" ||
2015
test "$linkmode,$pass" = "prog,scan" ||
2016
{ test "$linkmode" != prog && test "$linkmode" != lib; }; then
2017
test -n "$dlopen" && dlfiles="$dlfiles $dlopen"
2018
test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen"
2021
if test "$pass" = conv; then
2022
# Only check for convenience libraries
2023
deplibs="$lib $deplibs"
2025
for deplib in $dependency_libs; do
2026
#echo "Adding $deplib to \$deplibs"
2027
deplibs="$deplib $deplibs"
2028
if test "X$duplicate_deps" = "Xyes" ; then
2029
case "$tmp_libs " in
2030
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
2033
tmp_libs="$tmp_libs $deplib"
2035
if test -z "$libdir"; then
2036
if test -z "$old_library"; then
2037
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
2040
# It is a libtool convenience library, so add in its objects.
2041
convenience="$convenience $ladir/$objdir/$old_library"
2042
old_convenience="$old_convenience $ladir/$objdir/$old_library"
2043
elif test "$linkmode" != prog && test "$linkmode" != lib; then
2044
$echo "$modename: \`$lib' is not a convenience library" 1>&2
2051
# Get the name of the library we link against.
2053
for l in $old_library $library_names; do
2056
if test -z "$linklib"; then
2057
$echo "$modename: cannot find name of link library for \`$lib'" 1>&2
2061
# This library was specified with -dlopen.
2062
if test "$pass" = dlopen; then
2063
if test -z "$libdir"; then
2064
$echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2
2067
if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
2068
# If there is no dlname, no dlopen support or we're linking
2069
# statically, we need to preload. We also need to preload any
2070
# dependent libraries so libltdl's deplib preloader doesn't
2071
# bomb out in the load deplibs phase.
2072
dlprefiles="$dlprefiles $lib $dependency_libs"
2074
newdlfiles="$newdlfiles $lib"
2079
# We need an absolute path.
2081
[\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
2083
abs_ladir=`cd "$ladir" && pwd`
2084
if test -z "$abs_ladir"; then
2085
$echo "$modename: warning: cannot determine absolute directory name of \`$ladir'" 1>&2
2086
$echo "$modename: passing it literally to the linker, although it might fail" 1>&2
2091
laname=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
2093
# Find the relevant object directory and library name.
2094
if test "X$installed" = Xyes; then
2095
if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
2096
$echo "$modename: warning: library \`$lib' was moved." 1>&2
2105
dir="$ladir/$objdir"
2106
absdir="$abs_ladir/$objdir"
2107
# Remove this search path later
2108
notinst_path="$notinst_path $abs_ladir"
2109
fi # $installed = yes
2110
name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
2112
# This library was specified with -dlpreopen.
2113
if test "$pass" = dlpreopen; then
2114
if test -z "$libdir"; then
2115
$echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2
2118
# Prefer using a static library (so that no silly _DYNAMIC symbols
2119
# are required to link).
2120
if test -n "$old_library"; then
2121
newdlprefiles="$newdlprefiles $dir/$old_library"
2122
# Otherwise, use the dlname, so that lt_dlopen finds it.
2123
elif test -n "$dlname"; then
2124
newdlprefiles="$newdlprefiles $dir/$dlname"
2126
newdlprefiles="$newdlprefiles $dir/$linklib"
2128
fi # $pass = dlpreopen
2130
if test -z "$libdir"; then
2131
# Link the convenience library
2132
if test "$linkmode" = lib; then
2133
deplibs="$dir/$old_library $deplibs"
2134
elif test "$linkmode,$pass" = "prog,link"; then
2135
compile_deplibs="$dir/$old_library $compile_deplibs"
2136
finalize_deplibs="$dir/$old_library $finalize_deplibs"
2138
deplibs="$lib $deplibs" # used for prog,scan pass
2144
if test "$linkmode" = prog && test "$pass" != link; then
2145
newlib_search_path="$newlib_search_path $ladir"
2146
deplibs="$lib $deplibs"
2149
if test "$link_all_deplibs" != no || test -z "$library_names" ||
2150
test "$build_libtool_libs" = no; then
2155
for deplib in $dependency_libs; do
2157
-L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test
2159
# Need to link against all dependency_libs?
2160
if test "$linkalldeplibs" = yes; then
2161
deplibs="$deplib $deplibs"
2163
# Need to hardcode shared library paths
2164
# or/and link against static libraries
2165
newdependency_libs="$deplib $newdependency_libs"
2167
if test "X$duplicate_deps" = "Xyes" ; then
2168
case "$tmp_libs " in
2169
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
2172
tmp_libs="$tmp_libs $deplib"
2175
fi # $linkmode = prog...
2177
if test "$linkmode,$pass" = "prog,link"; then
2178
if test -n "$library_names" &&
2179
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
2180
# We need to hardcode the library path
2181
if test -n "$shlibpath_var"; then
2182
# Make sure the rpath contains only unique directories.
2183
case "$temp_rpath " in
2186
*) temp_rpath="$temp_rpath $dir" ;;
2190
# Hardcode the library path.
2191
# Skip directories that are in the system default run-time
2193
case " $sys_lib_dlsearch_path " in
2196
case "$compile_rpath " in
2198
*) compile_rpath="$compile_rpath $absdir"
2202
case " $sys_lib_dlsearch_path " in
2205
case "$finalize_rpath " in
2207
*) finalize_rpath="$finalize_rpath $libdir"
2211
fi # $linkmode,$pass = prog,link...
2213
if test "$alldeplibs" = yes &&
2214
{ test "$deplibs_check_method" = pass_all ||
2215
{ test "$build_libtool_libs" = yes &&
2216
test -n "$library_names"; }; }; then
2217
# We only need to search for static libraries
2222
link_static=no # Whether the deplib will be linked statically
2223
if test -n "$library_names" &&
2224
{ test "$prefer_static_libs" = no || test -z "$old_library"; }; then
2225
if test "$installed" = no; then
2226
notinst_deplibs="$notinst_deplibs $lib"
2229
# This is a shared library
2231
# Warn about portability, can't link against -module's on some systems (darwin)
2232
if test "$shouldnotlink" = yes && test "$pass" = link ; then
2234
if test "$linkmode" = prog; then
2235
$echo "*** Warning: Linking the executable $output against the loadable module"
2237
$echo "*** Warning: Linking the shared library $output against the loadable module"
2239
$echo "*** $linklib is not portable!"
2241
if test "$linkmode" = lib &&
2242
test "$hardcode_into_libs" = yes; then
2243
# Hardcode the library path.
2244
# Skip directories that are in the system default run-time
2246
case " $sys_lib_dlsearch_path " in
2249
case "$compile_rpath " in
2251
*) compile_rpath="$compile_rpath $absdir"
2255
case " $sys_lib_dlsearch_path " in
2258
case "$finalize_rpath " in
2260
*) finalize_rpath="$finalize_rpath $libdir"
2266
if test -n "$old_archive_from_expsyms_cmds"; then
2267
# figure out the soname
2268
set dummy $library_names
2271
libname=`eval \\$echo \"$libname_spec\"`
2272
# use dlname if we got it. it's perfectly good, no?
2273
if test -n "$dlname"; then
2275
elif test -n "$soname_spec"; then
2279
major=`expr $current - $age`
2283
eval soname=\"$soname_spec\"
2288
# Make a new name for the extract_expsyms_cmds to use
2290
soname=`$echo $soroot | ${SED} -e 's/^.*\///'`
2291
newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a"
2293
# If the library has no export list, then create one now
2294
if test -f "$output_objdir/$soname-def"; then :
2296
$show "extracting exported symbol list from \`$soname'"
2297
save_ifs="$IFS"; IFS='~'
2298
eval cmds=\"$extract_expsyms_cmds\"
2299
for cmd in $cmds; do
2302
$run eval "$cmd" || exit $?
2308
if test -f "$output_objdir/$newlib"; then :; else
2309
$show "generating import library for \`$soname'"
2310
save_ifs="$IFS"; IFS='~'
2311
eval cmds=\"$old_archive_from_expsyms_cmds\"
2312
for cmd in $cmds; do
2315
$run eval "$cmd" || exit $?
2319
# make sure the library variables are pointing to the new library
2322
fi # test -n "$old_archive_from_expsyms_cmds"
2324
if test "$linkmode" = prog || test "$mode" != relink; then
2329
case $hardcode_action in
2330
immediate | unsupported)
2331
if test "$hardcode_direct" = no; then
2334
*-*-sco3.2v5* ) add_dir="-L$dir" ;;
2336
# if the lib is a module then we can not link against it, someone
2337
# is ignoring the new warnings I added
2338
if /usr/bin/file -L $add 2> /dev/null | grep "bundle" >/dev/null ; then
2339
$echo "** Warning, lib $linklib is a module, not a shared library"
2340
if test -z "$old_library" ; then
2342
$echo "** And there doesn't seem to be a static archive available"
2343
$echo "** The link will probably fail, sorry"
2345
add="$dir/$old_library"
2349
elif test "$hardcode_minus_L" = no; then
2351
*-*-sunos*) add_shlibpath="$dir" ;;
2355
elif test "$hardcode_shlibpath_var" = no; then
2356
add_shlibpath="$dir"
2363
if test "$hardcode_direct" = yes; then
2365
elif test "$hardcode_minus_L" = yes; then
2367
# Try looking first in the location we're being installed to.
2368
if test -n "$inst_prefix_dir"; then
2371
add_dir="-L$inst_prefix_dir$libdir $add_dir"
2376
elif test "$hardcode_shlibpath_var" = yes; then
2377
add_shlibpath="$dir"
2386
if test "$lib_linked" != yes; then
2387
$echo "$modename: configuration error: unsupported hardcode properties"
2391
if test -n "$add_shlibpath"; then
2392
case :$compile_shlibpath: in
2393
*":$add_shlibpath:"*) ;;
2394
*) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;;
2397
if test "$linkmode" = prog; then
2398
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
2399
test -n "$add" && compile_deplibs="$add $compile_deplibs"
2401
test -n "$add_dir" && deplibs="$add_dir $deplibs"
2402
test -n "$add" && deplibs="$add $deplibs"
2403
if test "$hardcode_direct" != yes && \
2404
test "$hardcode_minus_L" != yes && \
2405
test "$hardcode_shlibpath_var" = yes; then
2406
case :$finalize_shlibpath: in
2408
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
2414
if test "$linkmode" = prog || test "$mode" = relink; then
2418
# Finalize command for both is simple: just hardcode it.
2419
if test "$hardcode_direct" = yes; then
2420
add="$libdir/$linklib"
2421
elif test "$hardcode_minus_L" = yes; then
2424
elif test "$hardcode_shlibpath_var" = yes; then
2425
case :$finalize_shlibpath: in
2427
*) finalize_shlibpath="$finalize_shlibpath$libdir:" ;;
2430
elif test "$hardcode_automatic" = yes; then
2431
if test -n "$inst_prefix_dir" && test -f "$inst_prefix_dir$libdir/$linklib" ; then
2432
add="$inst_prefix_dir$libdir/$linklib"
2434
add="$libdir/$linklib"
2437
# We cannot seem to hardcode it, guess we'll fake it.
2439
# Try looking first in the location we're being installed to.
2440
if test -n "$inst_prefix_dir"; then
2443
add_dir="-L$inst_prefix_dir$libdir $add_dir"
2450
if test "$linkmode" = prog; then
2451
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
2452
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
2454
test -n "$add_dir" && deplibs="$add_dir $deplibs"
2455
test -n "$add" && deplibs="$add $deplibs"
2458
elif test "$linkmode" = prog; then
2459
# Here we assume that one of hardcode_direct or hardcode_minus_L
2460
# is not unsupported. This is valid on all known static and
2462
if test "$hardcode_direct" != unsupported; then
2463
test -n "$old_library" && linklib="$old_library"
2464
compile_deplibs="$dir/$linklib $compile_deplibs"
2465
finalize_deplibs="$dir/$linklib $finalize_deplibs"
2467
compile_deplibs="-l$name -L$dir $compile_deplibs"
2468
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
2470
elif test "$build_libtool_libs" = yes; then
2471
# Not a shared library
2472
if test "$deplibs_check_method" != pass_all; then
2473
# We're trying link a shared library against a static one
2474
# but the system doesn't support it.
2476
# Just print a warning and add the library to dependency_libs so
2477
# that the program can be linked against the static library.
2479
$echo "*** Warning: This system can not link to static lib archive $lib."
2480
$echo "*** I have the capability to make that library automatically link in when"
2481
$echo "*** you link to this library. But I can only do this if you have a"
2482
$echo "*** shared version of the library, which you do not appear to have."
2483
if test "$module" = yes; then
2484
$echo "*** But as you try to build a module library, libtool will still create "
2485
$echo "*** a static module, that should work as long as the dlopening application"
2486
$echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
2487
if test -z "$global_symbol_pipe"; then
2489
$echo "*** However, this would only work if libtool was able to extract symbol"
2490
$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
2491
$echo "*** not find such a program. So, this module is probably useless."
2492
$echo "*** \`nm' from GNU binutils and a full rebuild may help."
2494
if test "$build_old_libs" = no; then
2495
build_libtool_libs=module
2498
build_libtool_libs=no
2502
convenience="$convenience $dir/$old_library"
2503
old_convenience="$old_convenience $dir/$old_library"
2504
deplibs="$dir/$old_library $deplibs"
2507
fi # link shared/static library?
2509
if test "$linkmode" = lib; then
2510
#if test -n "$dependency_libs" &&
2511
# { test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes ||
2512
# test "$link_static" = yes; }; then
2513
# Extract -R from dependency_libs
2515
for libdir in $dependency_libs; do
2517
-R*) temp_xrpath=`$echo "X$libdir" | $Xsed -e 's/^-R//'`
2519
*" $temp_xrpath "*) ;;
2520
*) xrpath="$xrpath $temp_xrpath";;
2522
*) temp_deplibs="$temp_deplibs $libdir";;
2525
dependency_libs="$temp_deplibs"
2528
newlib_search_path="$newlib_search_path $absdir"
2529
# Link against this library
2530
test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
2531
# ... and its dependency_libs
2533
for deplib in $dependency_libs; do
2534
newdependency_libs="$deplib $newdependency_libs"
2535
if test "X$duplicate_deps" = "Xyes" ; then
2536
case "$tmp_libs " in
2537
*" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;;
2540
tmp_libs="$tmp_libs $deplib"
2543
if test "$link_all_deplibs" != no; then
2544
# Add the search paths of all dependency libraries
2545
for deplib in $dependency_libs; do
2547
-L*) path="$deplib" ;;
2549
dir=`$echo "X$deplib" | $Xsed -e 's%/[^/]*$%%'`
2550
test "X$dir" = "X$deplib" && dir="."
2551
# We need an absolute path.
2553
[\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
2555
absdir=`cd "$dir" && pwd`
2556
if test -z "$absdir"; then
2557
$echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2
2562
if grep "^installed=no" $deplib > /dev/null; then
2563
path="$absdir/$objdir"
2565
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
2566
if test -z "$libdir"; then
2567
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
2570
if test "$absdir" != "$libdir"; then
2571
# Sure, some shells/systems don't implement the -ef.
2572
# Those will have to live with the warning.
2573
test "$absdir" -ef "$libdir" > /dev/null 2>&1 ||
2574
$echo "$modename: warning: \`$deplib' seems to be moved" 1>&2
2581
# we do not want to link against static libs, but need to link against shared
2582
eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
2583
if test -n "$deplibrary_names" ; then
2584
for tmp in $deplibrary_names ; do
2587
if test -f "$path/$depdepl" ; then
2588
depdepl="$path/$depdepl"
2590
# do not add paths which are already there
2591
case " $newlib_search_path " in
2593
*) newlib_search_path="$newlib_search_path $path";;
2607
# Again, we only want to link against shared libraries
2608
eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"`
2609
for tmp in $newlib_search_path ; do
2610
if test -f "$tmp/lib$tmp_libs.dylib" ; then
2611
eval depdepl="$tmp/lib$tmp_libs.dylib"
2622
case " $deplibs " in
2624
*) deplibs="$deplibs $depdepl" ;;
2626
case " $deplibs " in
2628
*) deplibs="$deplibs $path" ;;
2631
fi # link_all_deplibs != no
2633
done # for deplib in $libs
2634
dependency_libs="$newdependency_libs"
2635
if test "$pass" = dlpreopen; then
2636
# Link the dlpreopened libraries before other libraries
2637
for deplib in $save_deplibs; do
2638
deplibs="$deplib $deplibs"
2641
if test "$pass" != dlopen; then
2642
if test "$pass" != conv; then
2643
# Make sure lib_search_path contains only unique directories.
2645
for dir in $newlib_search_path; do
2646
case "$lib_search_path " in
2648
*) lib_search_path="$lib_search_path $dir" ;;
2654
if test "$linkmode,$pass" != "prog,link"; then
2657
vars="compile_deplibs finalize_deplibs"
2659
for var in $vars dependency_libs; do
2660
# Add libraries to $var in reverse order
2661
eval tmp_libs=\"\$$var\"
2663
for deplib in $tmp_libs; do
2664
# FIXME: Pedantically, this is the right thing to do, so
2665
# that some nasty dependency loop isn't accidentally
2667
#new_libs="$deplib $new_libs"
2668
# Pragmatically, this seems to cause very few problems in
2671
-L*) new_libs="$deplib $new_libs" ;;
2674
# And here is the reason: when a library appears more
2675
# than once as an explicit dependence of a library, or
2676
# is implicitly linked in more than once by the
2677
# compiler, it is considered special, and multiple
2678
# occurrences thereof are not removed. Compare this
2679
# with having the same library being listed as a
2680
# dependency of multiple other libraries: in this case,
2681
# we know (pedantically, we assume) the library does not
2682
# need to be listed more than once, so we keep only the
2683
# last copy. This is not always right, but it is rare
2684
# enough that we require users that really mean to play
2685
# such unportable linking tricks to link the library
2686
# using -Wl,-lname, so that libtool does not consider it
2687
# for duplicate removal.
2688
case " $specialdeplibs " in
2689
*" $deplib "*) new_libs="$deplib $new_libs" ;;
2691
case " $new_libs " in
2693
*) new_libs="$deplib $new_libs" ;;
2701
for deplib in $new_libs; do
2704
case " $tmp_libs " in
2706
*) tmp_libs="$tmp_libs $deplib" ;;
2709
*) tmp_libs="$tmp_libs $deplib" ;;
2712
eval $var=\"$tmp_libs\"
2715
# Last step: remove runtime libs from dependency_libs (they stay in deplibs)
2717
for i in $dependency_libs ; do
2718
case " $predeps $postdeps $compiler_lib_search_path " in
2723
if test -n "$i" ; then
2724
tmp_libs="$tmp_libs $i"
2727
dependency_libs=$tmp_libs
2729
if test "$linkmode" = prog; then
2730
dlfiles="$newdlfiles"
2731
dlprefiles="$newdlprefiles"
2736
if test -n "$deplibs"; then
2737
$echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2
2740
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
2741
$echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2
2744
if test -n "$rpath"; then
2745
$echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2
2748
if test -n "$xrpath"; then
2749
$echo "$modename: warning: \`-R' is ignored for archives" 1>&2
2752
if test -n "$vinfo"; then
2753
$echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2
2756
if test -n "$release"; then
2757
$echo "$modename: warning: \`-release' is ignored for archives" 1>&2
2760
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
2761
$echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2
2764
# Now set the variables for building old libraries.
2765
build_libtool_libs=no
2767
objs="$objs$old_deplibs"
2771
# Make sure we only generate libraries of the form `libNAME.la'.
2774
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'`
2775
eval shared_ext=\"$shrext\"
2776
eval libname=\"$libname_spec\"
2779
if test "$module" = no; then
2780
$echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2
2784
if test "$need_lib_prefix" != no; then
2785
# Add the "lib" prefix for modules if required
2786
name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
2787
eval shared_ext=\"$shrext\"
2788
eval libname=\"$libname_spec\"
2790
libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'`
2795
if test -n "$objs"; then
2796
if test "$deplibs_check_method" != pass_all; then
2797
$echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1
2801
$echo "*** Warning: Linking the shared library $output against the non-libtool"
2802
$echo "*** objects $objs is not portable!"
2803
libobjs="$libobjs $objs"
2807
if test "$dlself" != no; then
2808
$echo "$modename: warning: \`-dlopen self' is ignored for libtool libraries" 1>&2
2812
if test "$#" -gt 2; then
2813
$echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2
2818
if test -z "$rpath"; then
2819
if test "$build_libtool_libs" = yes; then
2820
# Building a libtool convenience library.
2821
# Some compilers have problems with a `.al' extension so
2822
# convenience libraries should have the same extension an
2823
# archive normally would.
2824
oldlibs="$output_objdir/$libname.$libext $oldlibs"
2825
build_libtool_libs=convenience
2829
if test -n "$vinfo"; then
2830
$echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2
2833
if test -n "$release"; then
2834
$echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2
2838
# Parse the version information argument.
2839
save_ifs="$IFS"; IFS=':'
2840
set dummy $vinfo 0 0 0
2843
if test -n "$8"; then
2844
$echo "$modename: too many parameters to \`-version-info'" 1>&2
2849
# convert absolute version numbers to libtool ages
2850
# this retains compatibility with .la files and attempts
2851
# to make the code below a bit more comprehensible
2853
case $vinfo_number in
2857
number_revision="$4"
2859
# There are really only two kinds -- those that
2860
# use the current revision as the major version
2861
# and those that subtract age and use age as
2862
# a minor version. But, then there is irix
2863
# which has an extra 1 added just for fun
2865
case $version_type in
2866
darwin|linux|osf|windows)
2867
current=`expr $number_major + $number_minor`
2869
revision="$number_revision"
2871
freebsd-aout|freebsd-elf|sunos)
2872
current="$number_major"
2873
revision="$number_minor"
2877
current=`expr $number_major + $number_minor - 1`
2879
revision="$number_minor"
2890
# Check that each of the things are valid numbers.
2892
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
2894
$echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2
2895
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2901
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
2903
$echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2
2904
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2910
0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;;
2912
$echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2
2913
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2918
if test "$age" -gt "$current"; then
2919
$echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2
2920
$echo "$modename: \`$vinfo' is not valid version information" 1>&2
2924
# Calculate the version variables.
2928
case $version_type in
2932
# Like Linux, but with the current version available in
2933
# verstring for coding it into the library header
2934
major=.`expr $current - $age`
2935
versuffix="$major.$age.$revision"
2936
# Darwin ld doesn't like 0 for these options...
2937
minor_current=`expr $current + 1`
2938
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
2943
versuffix=".$current.$revision";
2948
versuffix=".$current";
2952
major=`expr $current - $age + 1`
2954
case $version_type in
2955
nonstopux) verstring_prefix=nonstopux ;;
2956
*) verstring_prefix=sgi ;;
2958
verstring="$verstring_prefix$major.$revision"
2960
# Add in all the interfaces that we are compatible with.
2962
while test "$loop" -ne 0; do
2963
iface=`expr $revision - $loop`
2964
loop=`expr $loop - 1`
2965
verstring="$verstring_prefix$major.$iface:$verstring"
2968
# Before this point, $major must not contain `.'.
2970
versuffix="$major.$revision"
2974
major=.`expr $current - $age`
2975
versuffix="$major.$age.$revision"
2979
major=.`expr $current - $age`
2980
versuffix=".$current.$age.$revision"
2981
verstring="$current.$age.$revision"
2983
# Add in all the interfaces that we are compatible with.
2985
while test "$loop" -ne 0; do
2986
iface=`expr $current - $loop`
2987
loop=`expr $loop - 1`
2988
verstring="$verstring:${iface}.0"
2991
# Make executables depend on our current version.
2992
verstring="$verstring:${current}.0"
2997
versuffix=".$current.$revision"
3001
# Use '-' rather than '.', since we only want one
3002
# extension on DOS 8.3 filesystems.
3003
major=`expr $current - $age`
3008
$echo "$modename: unknown library version type \`$version_type'" 1>&2
3009
$echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2
3014
# Clear the version info if we defaulted, and they specified a release.
3015
if test -z "$vinfo" && test -n "$release"; then
3017
case $version_type in
3019
# we can't check for "0.0" in archive_cmds due to quoting
3020
# problems, so we reset it completely
3027
if test "$need_version" = no; then
3034
# Remove version info from name if versioning should be avoided
3035
if test "$avoid_version" = yes && test "$need_version" = no; then
3041
# Check to see if the archive will have undefined symbols.
3042
if test "$allow_undefined" = yes; then
3043
if test "$allow_undefined_flag" = unsupported; then
3044
$echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2
3045
build_libtool_libs=no
3049
# Don't allow undefined symbols.
3050
allow_undefined_flag="$no_undefined_flag"
3054
if test "$mode" != relink; then
3055
# Remove our outputs, but don't remove object files since they
3056
# may have been created when compiling PIC objects.
3058
tempremovelist=`$echo "$output_objdir/*"`
3059
for p in $tempremovelist; do
3063
$output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
3064
removelist="$removelist $p"
3069
if test -n "$removelist"; then
3070
$show "${rm}r $removelist"
3071
$run ${rm}r $removelist
3075
# Now set the variables for building old libraries.
3076
if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
3077
oldlibs="$oldlibs $output_objdir/$libname.$libext"
3079
# Transform .lo files to .o files.
3080
oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
3083
# Eliminate all temporary directories.
3084
for path in $notinst_path; do
3085
lib_search_path=`$echo "$lib_search_path " | ${SED} -e 's% $path % %g'`
3086
deplibs=`$echo "$deplibs " | ${SED} -e 's% -L$path % %g'`
3087
dependency_libs=`$echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'`
3090
if test -n "$xrpath"; then
3091
# If the user specified any rpath flags, then add them.
3093
for libdir in $xrpath; do
3094
temp_xrpath="$temp_xrpath -R$libdir"
3095
case "$finalize_rpath " in
3097
*) finalize_rpath="$finalize_rpath $libdir" ;;
3100
if true || test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
3101
dependency_libs="$temp_xrpath $dependency_libs"
3105
# Make sure dlfiles contains only unique files that won't be dlpreopened
3106
old_dlfiles="$dlfiles"
3108
for lib in $old_dlfiles; do
3109
case " $dlprefiles $dlfiles " in
3111
*) dlfiles="$dlfiles $lib" ;;
3115
# Make sure dlprefiles contains only unique files
3116
old_dlprefiles="$dlprefiles"
3118
for lib in $old_dlprefiles; do
3119
case "$dlprefiles " in
3121
*) dlprefiles="$dlprefiles $lib" ;;
3125
if test "$build_libtool_libs" = yes; then
3126
if test -n "$rpath"; then
3128
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*)
3129
# these systems don't actually have a c library (as such)!
3131
*-*-rhapsody* | *-*-darwin1.[012])
3132
# Rhapsody C library is in the System framework
3133
deplibs="$deplibs -framework System"
3136
# Don't link with libc until the a.out ld.so is fixed.
3139
# Prevent $arg from being parsed by the freebsd regexp below.
3140
if test "$build_libtool_need_lc" = "yes"; then
3141
deplibs="$deplibs -lc"
3144
*-*-openbsd* | *-*-freebsd*)
3145
# Do not include libc due to us having libc/libc_r.
3146
test "X$arg" = "X-lc" && continue
3149
# Add libc to deplibs on all other systems if necessary.
3150
if test "$build_libtool_need_lc" = "yes"; then
3151
deplibs="$deplibs -lc"
3157
# Transform deplibs into only deplibs that can be linked in shared.
3159
libname_save=$libname
3160
release_save=$release
3161
versuffix_save=$versuffix
3163
# I'm not sure if I'm treating the release correctly. I think
3164
# release should show up in the -l (ie -lgmp5) so we don't want to
3165
# add it in twice. Is that correct?
3171
case $deplibs_check_method in
3173
# Don't check for shared/static. Everything works.
3174
# This might be a little naive. We might want to check
3175
# whether the library exists or not. But this is on
3176
# osf3 & osf4 and I'm not really sure... Just
3177
# implementing what was already the behavior.
3181
# This code stresses the "libraries are programs" paradigm to its
3182
# limits. Maybe even breaks it. We compile a program, linking it
3183
# against the deplibs as a proxy for the library. Then we can check
3184
# whether they linked in statically or dynamically with ldd.
3186
cat > conftest.c <<EOF
3187
int main() { return 0; }
3190
$LTCC -o conftest conftest.c $deplibs
3191
if test "$?" -eq 0 ; then
3192
ldd_output=`ldd conftest`
3193
for i in $deplibs; do
3194
name="`expr $i : '-l\(.*\)'`"
3195
# If $name is empty we are operating on a -L argument.
3196
if test "$name" != "" && test "$name" -ne "0"; then
3197
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3198
case " $predeps $postdeps " in
3200
newdeplibs="$newdeplibs $i"
3205
if test -n "$i" ; then
3206
libname=`eval \\$echo \"$libname_spec\"`
3207
deplib_matches=`eval \\$echo \"$library_names_spec\"`
3208
set dummy $deplib_matches
3210
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
3211
newdeplibs="$newdeplibs $i"
3215
$echo "*** Warning: dynamic linker does not accept needed library $i."
3216
$echo "*** I have the capability to make that library automatically link in when"
3217
$echo "*** you link to this library. But I can only do this if you have a"
3218
$echo "*** shared version of the library, which I believe you do not have"
3219
$echo "*** because a test_compile did reveal that the linker did not use it for"
3220
$echo "*** its dynamic dependency list that programs get resolved with at runtime."
3224
newdeplibs="$newdeplibs $i"
3228
# Error occurred in the first compile. Let's try to salvage
3229
# the situation: Compile a separate program for each library.
3230
for i in $deplibs; do
3231
name="`expr $i : '-l\(.*\)'`"
3232
# If $name is empty we are operating on a -L argument.
3233
if test "$name" != "" && test "$name" != "0"; then
3235
$LTCC -o conftest conftest.c $i
3237
if test "$?" -eq 0 ; then
3238
ldd_output=`ldd conftest`
3239
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3240
case " $predeps $postdeps " in
3242
newdeplibs="$newdeplibs $i"
3247
if test -n "$i" ; then
3248
libname=`eval \\$echo \"$libname_spec\"`
3249
deplib_matches=`eval \\$echo \"$library_names_spec\"`
3250
set dummy $deplib_matches
3252
if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
3253
newdeplibs="$newdeplibs $i"
3257
$echo "*** Warning: dynamic linker does not accept needed library $i."
3258
$echo "*** I have the capability to make that library automatically link in when"
3259
$echo "*** you link to this library. But I can only do this if you have a"
3260
$echo "*** shared version of the library, which you do not appear to have"
3261
$echo "*** because a test_compile did reveal that the linker did not use this one"
3262
$echo "*** as a dynamic dependency that programs can get resolved with at runtime."
3268
$echo "*** Warning! Library $i is needed by this library but I was not able to"
3269
$echo "*** make it link in! You will probably need to install it or some"
3270
$echo "*** library that it depends on before this library will be fully"
3271
$echo "*** functional. Installing it before continuing would be even better."
3274
newdeplibs="$newdeplibs $i"
3280
set dummy $deplibs_check_method
3281
file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
3282
for a_deplib in $deplibs; do
3283
name="`expr $a_deplib : '-l\(.*\)'`"
3284
# If $name is empty we are operating on a -L argument.
3285
if test "$name" != "" && test "$name" != "0"; then
3286
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3287
case " $predeps $postdeps " in
3289
newdeplibs="$newdeplibs $a_deplib"
3294
if test -n "$a_deplib" ; then
3295
libname=`eval \\$echo \"$libname_spec\"`
3296
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
3297
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
3298
for potent_lib in $potential_libs; do
3299
# Follow soft links.
3300
if ls -lLd "$potent_lib" 2>/dev/null \
3301
| grep " -> " >/dev/null; then
3304
# The statement above tries to avoid entering an
3305
# endless loop below, in case of cyclic links.
3306
# We might still enter an endless loop, since a link
3307
# loop can be closed while we follow links,
3309
potlib="$potent_lib"
3310
while test -h "$potlib" 2>/dev/null; do
3311
potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
3313
[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
3314
*) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
3317
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \
3319
| $EGREP "$file_magic_regex" > /dev/null; then
3320
newdeplibs="$newdeplibs $a_deplib"
3327
if test -n "$a_deplib" ; then
3330
$echo "*** Warning: linker path does not have real file for library $a_deplib."
3331
$echo "*** I have the capability to make that library automatically link in when"
3332
$echo "*** you link to this library. But I can only do this if you have a"
3333
$echo "*** shared version of the library, which you do not appear to have"
3334
$echo "*** because I did check the linker path looking for a file starting"
3335
if test -z "$potlib" ; then
3336
$echo "*** with $libname but no candidates were found. (...for file magic test)"
3338
$echo "*** with $libname and none of the candidates passed a file format test"
3339
$echo "*** using a file magic. Last file checked: $potlib"
3343
# Add a -L argument.
3344
newdeplibs="$newdeplibs $a_deplib"
3346
done # Gone through all deplibs.
3349
set dummy $deplibs_check_method
3350
match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"`
3351
for a_deplib in $deplibs; do
3352
name="`expr $a_deplib : '-l\(.*\)'`"
3353
# If $name is empty we are operating on a -L argument.
3354
if test -n "$name" && test "$name" != "0"; then
3355
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3356
case " $predeps $postdeps " in
3358
newdeplibs="$newdeplibs $a_deplib"
3363
if test -n "$a_deplib" ; then
3364
libname=`eval \\$echo \"$libname_spec\"`
3365
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
3366
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
3367
for potent_lib in $potential_libs; do
3368
potlib="$potent_lib" # see symlink-check above in file_magic test
3369
if eval $echo \"$potent_lib\" 2>/dev/null \
3371
| $EGREP "$match_pattern_regex" > /dev/null; then
3372
newdeplibs="$newdeplibs $a_deplib"
3379
if test -n "$a_deplib" ; then
3382
$echo "*** Warning: linker path does not have real file for library $a_deplib."
3383
$echo "*** I have the capability to make that library automatically link in when"
3384
$echo "*** you link to this library. But I can only do this if you have a"
3385
$echo "*** shared version of the library, which you do not appear to have"
3386
$echo "*** because I did check the linker path looking for a file starting"
3387
if test -z "$potlib" ; then
3388
$echo "*** with $libname but no candidates were found. (...for regex pattern test)"
3390
$echo "*** with $libname and none of the candidates passed a file format test"
3391
$echo "*** using a regex pattern. Last file checked: $potlib"
3395
# Add a -L argument.
3396
newdeplibs="$newdeplibs $a_deplib"
3398
done # Gone through all deplibs.
3402
tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \
3403
-e 's/ -[LR][^ ]*//g'`
3404
if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
3405
for i in $predeps $postdeps ; do
3406
# can't use Xsed below, because $i might contain '/'
3407
tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"`
3410
if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \
3411
| grep . >/dev/null; then
3413
if test "X$deplibs_check_method" = "Xnone"; then
3414
$echo "*** Warning: inter-library dependencies are not supported in this platform."
3416
$echo "*** Warning: inter-library dependencies are not known to be supported."
3418
$echo "*** All declared inter-library dependencies are being dropped."
3423
versuffix=$versuffix_save
3425
release=$release_save
3426
libname=$libname_save
3430
*-*-rhapsody* | *-*-darwin1.[012])
3431
# On Rhapsody replace the C library is the System framework
3432
newdeplibs=`$echo "X $newdeplibs" | $Xsed -e 's/ -lc / -framework System /'`
3436
if test "$droppeddeps" = yes; then
3437
if test "$module" = yes; then
3439
$echo "*** Warning: libtool could not satisfy all declared inter-library"
3440
$echo "*** dependencies of module $libname. Therefore, libtool will create"
3441
$echo "*** a static module, that should work as long as the dlopening"
3442
$echo "*** application is linked with the -dlopen flag."
3443
if test -z "$global_symbol_pipe"; then
3445
$echo "*** However, this would only work if libtool was able to extract symbol"
3446
$echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
3447
$echo "*** not find such a program. So, this module is probably useless."
3448
$echo "*** \`nm' from GNU binutils and a full rebuild may help."
3450
if test "$build_old_libs" = no; then
3451
oldlibs="$output_objdir/$libname.$libext"
3452
build_libtool_libs=module
3455
build_libtool_libs=no
3458
$echo "*** The inter-library dependencies that have been dropped here will be"
3459
$echo "*** automatically added whenever a program is linked with this library"
3460
$echo "*** or is declared to -dlopen it."
3462
if test "$allow_undefined" = no; then
3464
$echo "*** Since this library must not contain undefined symbols,"
3465
$echo "*** because either the platform does not support them or"
3466
$echo "*** it was explicitly requested with -no-undefined,"
3467
$echo "*** libtool will only create a static version of it."
3468
if test "$build_old_libs" = no; then
3469
oldlibs="$output_objdir/$libname.$libext"
3470
build_libtool_libs=module
3473
build_libtool_libs=no
3478
# Done checking deplibs!
3482
# All the library-specific variables (install_libdir is set above).
3487
# Test again, we may have decided not to build it any more
3488
if test "$build_libtool_libs" = yes; then
3489
if test "$hardcode_into_libs" = yes; then
3490
# Hardcode the library paths
3493
rpath="$finalize_rpath"
3494
test "$mode" != relink && test "$fast_install" = no && rpath="$compile_rpath$rpath"
3495
for libdir in $rpath; do
3496
if test -n "$hardcode_libdir_flag_spec"; then
3497
if test -n "$hardcode_libdir_separator"; then
3498
if test -z "$hardcode_libdirs"; then
3499
hardcode_libdirs="$libdir"
3501
# Just accumulate the unique libdirs.
3502
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
3503
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
3506
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
3511
eval flag=\"$hardcode_libdir_flag_spec\"
3512
dep_rpath="$dep_rpath $flag"
3514
elif test -n "$runpath_var"; then
3515
case "$perm_rpath " in
3517
*) perm_rpath="$perm_rpath $libdir" ;;
3521
# Substitute the hardcoded libdirs into the rpath.
3522
if test -n "$hardcode_libdir_separator" &&
3523
test -n "$hardcode_libdirs"; then
3524
libdir="$hardcode_libdirs"
3525
if test -n "$hardcode_libdir_flag_spec_ld"; then
3526
eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\"
3528
eval dep_rpath=\"$hardcode_libdir_flag_spec\"
3531
if test -n "$runpath_var" && test -n "$perm_rpath"; then
3532
# We should set the runpath_var.
3534
for dir in $perm_rpath; do
3537
eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
3539
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
3542
shlibpath="$finalize_shlibpath"
3543
test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
3544
if test -n "$shlibpath"; then
3545
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
3548
# Get the real and link names of the library.
3549
eval shared_ext=\"$shrext\"
3550
eval library_names=\"$library_names_spec\"
3551
set dummy $library_names
3555
if test -n "$soname_spec"; then
3556
eval soname=\"$soname_spec\"
3560
if test -z "$dlname"; then
3564
lib="$output_objdir/$realname"
3567
linknames="$linknames $link"
3570
# Use standard objects if they are pic
3571
test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
3573
# Prepare the list of exported symbols
3574
if test -z "$export_symbols"; then
3575
if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
3576
$show "generating symbol list for \`$libname.la'"
3577
export_symbols="$output_objdir/$libname.exp"
3578
$run $rm $export_symbols
3579
eval cmds=\"$export_symbols_cmds\"
3580
save_ifs="$IFS"; IFS='~'
3581
for cmd in $cmds; do
3583
if len=`expr "X$cmd" : ".*"` &&
3584
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
3586
$run eval "$cmd" || exit $?
3587
skipped_export=false
3589
# The command line is too long to execute in one step.
3590
$show "using reloadable object file for export list..."
3595
if test -n "$export_symbols_regex"; then
3596
$show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\""
3597
$run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
3598
$show "$mv \"${export_symbols}T\" \"$export_symbols\""
3599
$run eval '$mv "${export_symbols}T" "$export_symbols"'
3604
if test -n "$export_symbols" && test -n "$include_expsyms"; then
3605
$run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"'
3609
for test_deplib in $deplibs; do
3610
case " $convenience " in
3611
*" $test_deplib "*) ;;
3613
tmp_deplibs="$tmp_deplibs $test_deplib"
3617
deplibs="$tmp_deplibs"
3619
if test -n "$convenience"; then
3620
if test -n "$whole_archive_flag_spec"; then
3621
save_libobjs=$libobjs
3622
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
3624
gentop="$output_objdir/${outputname}x"
3625
$show "${rm}r $gentop"
3626
$run ${rm}r "$gentop"
3627
$show "$mkdir $gentop"
3628
$run $mkdir "$gentop"
3630
if test "$status" -ne 0 && test ! -d "$gentop"; then
3633
generated="$generated $gentop"
3635
for xlib in $convenience; do
3636
# Extract the objects.
3638
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
3639
*) xabs=`pwd`"/$xlib" ;;
3641
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
3642
xdir="$gentop/$xlib"
3644
$show "${rm}r $xdir"
3646
$show "$mkdir $xdir"
3649
if test "$status" -ne 0 && test ! -d "$xdir"; then
3652
# We will extract separately just the conflicting names and we will no
3653
# longer touch any unique names. It is faster to leave these extract
3654
# automatically by $AR in one run.
3655
$show "(cd $xdir && $AR x $xabs)"
3656
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
3657
if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
3660
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
3661
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
3662
$AR t "$xabs" | sort | uniq -cd | while read -r count name
3665
while test "$i" -le "$count"
3667
# Put our $i before any first dot (extension)
3668
# Never overwrite any file
3670
while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
3672
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
3674
$show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
3675
$run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
3681
libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
3686
if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
3687
eval flag=\"$thread_safe_flag_spec\"
3688
linker_flags="$linker_flags $flag"
3691
# Make a backup of the uninstalled library when relinking
3692
if test "$mode" = relink; then
3693
$run eval '(cd $output_objdir && $rm ${realname}U && $mv $realname ${realname}U)' || exit $?
3696
# Add all flags from the command line. We here create a library,
3697
# but those flags were only added to compile_command and
3698
# finalize_command, which are only used when creating executables.
3699
# So do it by hand here.
3700
compiler_flags="$compiler_flags $add_flags"
3701
# Only add it to commands which use CC, instead of LD, i.e.
3702
# only to $compiler_flags
3703
#linker_flags="$linker_flags $add_flags"
3705
# Do each of the archive commands.
3706
if test "$module" = yes && test -n "$module_cmds" ; then
3707
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
3708
eval cmds=\"$module_expsym_cmds\"
3710
eval cmds=\"$module_cmds\"
3713
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
3714
eval cmds=\"$archive_expsym_cmds\"
3716
eval cmds=\"$archive_cmds\"
3720
if test "X$skipped_export" != "X:" && len=`expr "X$cmds" : ".*"` &&
3721
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
3724
# The command line is too long to link in one step, link piecewise.
3725
$echo "creating reloadable object files..."
3727
# Save the value of $output and $libobjs because we want to
3728
# use them later. If we have whole_archive_flag_spec, we
3729
# want to use save_libobjs as it was before
3730
# whole_archive_flag_spec was expanded, because we can't
3731
# assume the linker understands whole_archive_flag_spec.
3732
# This may have to be revisited, in case too many
3733
# convenience libraries get linked in and end up exceeding
3735
if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
3736
save_libobjs=$libobjs
3740
# Clear the reloadable object creation command queue and
3741
# initialize k to one.
3748
output=$output_objdir/$save_output-${k}.$objext
3749
# Loop over the list of objects to be linked.
3750
for obj in $save_libobjs
3752
eval test_cmds=\"$reload_cmds $objlist $last_robj\"
3753
if test "X$objlist" = X ||
3754
{ len=`expr "X$test_cmds" : ".*"` &&
3755
test "$len" -le "$max_cmd_len"; }; then
3756
objlist="$objlist $obj"
3758
# The command $test_cmds is almost too long, add a
3759
# command to the queue.
3760
if test "$k" -eq 1 ; then
3761
# The first file doesn't have a previous command to add.
3762
eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
3764
# All subsequent reloadable object files will link in
3765
# the last one created.
3766
eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\"
3768
last_robj=$output_objdir/$save_output-${k}.$objext
3770
output=$output_objdir/$save_output-${k}.$objext
3775
# Handle the remaining objects by creating one last
3776
# reloadable object file. All subsequent reloadable object
3777
# files will link in the last one created.
3778
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
3779
eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
3781
if ${skipped_export-false}; then
3782
$show "generating symbol list for \`$libname.la'"
3783
export_symbols="$output_objdir/$libname.exp"
3784
$run $rm $export_symbols
3786
# Append the command to create the export file.
3787
eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\"
3790
# Set up a command to remove the reloadale object files
3791
# after they are used.
3793
while test "$i" -lt "$k"
3796
delfiles="$delfiles $output_objdir/$save_output-${i}.$objext"
3799
$echo "creating a temporary reloadable object file: $output"
3801
# Loop through the commands generated above and execute them.
3802
save_ifs="$IFS"; IFS='~'
3803
for cmd in $concat_cmds; do
3806
$run eval "$cmd" || exit $?
3811
# Restore the value of output.
3814
if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
3815
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
3817
# Expand the library linking commands again to reset the
3818
# value of $libobjs for piecewise linking.
3820
# Do each of the archive commands.
3821
if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
3822
eval cmds=\"$archive_expsym_cmds\"
3824
eval cmds=\"$archive_cmds\"
3827
# Append the command to remove the reloadable object files
3828
# to the just-reset $cmds.
3829
eval cmds=\"\$cmds~$rm $delfiles\"
3831
save_ifs="$IFS"; IFS='~'
3832
for cmd in $cmds; do
3835
$run eval "$cmd" || exit $?
3839
# Restore the uninstalled library and exit
3840
if test "$mode" = relink; then
3841
$run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $?
3845
# Create links to the real library.
3846
for linkname in $linknames; do
3847
if test "$realname" != "$linkname"; then
3848
$show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)"
3849
$run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $?
3853
# If -module or -export-dynamic was specified, set the dlname.
3854
if test "$module" = yes || test "$export_dynamic" = yes; then
3855
# On all known operating systems, these are identical.
3862
if test -n "$deplibs"; then
3863
$echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2
3866
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
3867
$echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2
3870
if test -n "$rpath"; then
3871
$echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2
3874
if test -n "$xrpath"; then
3875
$echo "$modename: warning: \`-R' is ignored for objects" 1>&2
3878
if test -n "$vinfo"; then
3879
$echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2
3882
if test -n "$release"; then
3883
$echo "$modename: warning: \`-release' is ignored for objects" 1>&2
3888
if test -n "$objs$old_deplibs"; then
3889
$echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2
3893
obj=`$echo "X$output" | $Xsed -e "$lo2o"`
3901
# Delete the old objects.
3902
$run $rm $obj $libobj
3904
# Objects from convenience libraries. This assumes
3905
# single-version convenience libraries. Whenever we create
3906
# different ones for PIC/non-PIC, this we'll have to duplicate
3910
# reload_cmds runs $LD directly, so let us get rid of
3911
# -Wl from whole_archive_flag_spec
3914
if test -n "$convenience"; then
3915
if test -n "$whole_archive_flag_spec"; then
3916
eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
3918
gentop="$output_objdir/${obj}x"
3919
$show "${rm}r $gentop"
3920
$run ${rm}r "$gentop"
3921
$show "$mkdir $gentop"
3922
$run $mkdir "$gentop"
3924
if test "$status" -ne 0 && test ! -d "$gentop"; then
3927
generated="$generated $gentop"
3929
for xlib in $convenience; do
3930
# Extract the objects.
3932
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
3933
*) xabs=`pwd`"/$xlib" ;;
3935
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
3936
xdir="$gentop/$xlib"
3938
$show "${rm}r $xdir"
3940
$show "$mkdir $xdir"
3943
if test "$status" -ne 0 && test ! -d "$xdir"; then
3946
# We will extract separately just the conflicting names and we will no
3947
# longer touch any unique names. It is faster to leave these extract
3948
# automatically by $AR in one run.
3949
$show "(cd $xdir && $AR x $xabs)"
3950
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
3951
if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
3954
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
3955
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
3956
$AR t "$xabs" | sort | uniq -cd | while read -r count name
3959
while test "$i" -le "$count"
3961
# Put our $i before any first dot (extension)
3962
# Never overwrite any file
3964
while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
3966
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
3968
$show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
3969
$run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
3975
reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
3980
# Create the old-style object.
3981
reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
3984
eval cmds=\"$reload_cmds\"
3985
save_ifs="$IFS"; IFS='~'
3986
for cmd in $cmds; do
3989
$run eval "$cmd" || exit $?
3993
# Exit if we aren't doing a library object file.
3994
if test -z "$libobj"; then
3995
if test -n "$gentop"; then
3996
$show "${rm}r $gentop"
4003
if test "$build_libtool_libs" != yes; then
4004
if test -n "$gentop"; then
4005
$show "${rm}r $gentop"
4009
# Create an invalid libtool object if no PIC, so that we don't
4010
# accidentally link it into a program.
4011
# $show "echo timestamp > $libobj"
4012
# $run eval "echo timestamp > $libobj" || exit $?
4016
if test -n "$pic_flag" || test "$pic_mode" != default; then
4017
# Only do commands if we really have different PIC objects.
4018
reload_objs="$libobjs $reload_conv_objs"
4020
eval cmds=\"$reload_cmds\"
4021
save_ifs="$IFS"; IFS='~'
4022
for cmd in $cmds; do
4025
$run eval "$cmd" || exit $?
4030
if test -n "$gentop"; then
4031
$show "${rm}r $gentop"
4040
*cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;;
4042
if test -n "$vinfo"; then
4043
$echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2
4046
if test -n "$release"; then
4047
$echo "$modename: warning: \`-release' is ignored for programs" 1>&2
4050
if test "$preload" = yes; then
4051
if test "$dlopen_support" = unknown && test "$dlopen_self" = unknown &&
4052
test "$dlopen_self_static" = unknown; then
4053
$echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support."
4058
*-*-rhapsody* | *-*-darwin1.[012])
4059
# On Rhapsody replace the C library is the System framework
4060
compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
4061
finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'`
4067
# Don't allow lazy linking, it breaks C++ global constructors
4068
if test "$tagname" = CXX ; then
4069
compile_command="$compile_command ${wl}-bind_at_load"
4070
finalize_command="$finalize_command ${wl}-bind_at_load"
4075
compile_command="$compile_command $compile_deplibs"
4076
finalize_command="$finalize_command $finalize_deplibs"
4078
if test -n "$rpath$xrpath"; then
4079
# If the user specified any rpath flags, then add them.
4080
for libdir in $rpath $xrpath; do
4081
# This is the magic to use -rpath.
4082
case "$finalize_rpath " in
4084
*) finalize_rpath="$finalize_rpath $libdir" ;;
4089
# Now hardcode the library paths
4092
for libdir in $compile_rpath $finalize_rpath; do
4093
if test -n "$hardcode_libdir_flag_spec"; then
4094
if test -n "$hardcode_libdir_separator"; then
4095
if test -z "$hardcode_libdirs"; then
4096
hardcode_libdirs="$libdir"
4098
# Just accumulate the unique libdirs.
4099
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
4100
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
4103
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
4108
eval flag=\"$hardcode_libdir_flag_spec\"
4109
rpath="$rpath $flag"
4111
elif test -n "$runpath_var"; then
4112
case "$perm_rpath " in
4114
*) perm_rpath="$perm_rpath $libdir" ;;
4118
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*)
4119
case :$dllsearchpath: in
4121
*) dllsearchpath="$dllsearchpath:$libdir";;
4126
# Substitute the hardcoded libdirs into the rpath.
4127
if test -n "$hardcode_libdir_separator" &&
4128
test -n "$hardcode_libdirs"; then
4129
libdir="$hardcode_libdirs"
4130
eval rpath=\" $hardcode_libdir_flag_spec\"
4132
compile_rpath="$rpath"
4136
for libdir in $finalize_rpath; do
4137
if test -n "$hardcode_libdir_flag_spec"; then
4138
if test -n "$hardcode_libdir_separator"; then
4139
if test -z "$hardcode_libdirs"; then
4140
hardcode_libdirs="$libdir"
4142
# Just accumulate the unique libdirs.
4143
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
4144
*"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
4147
hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir"
4152
eval flag=\"$hardcode_libdir_flag_spec\"
4153
rpath="$rpath $flag"
4155
elif test -n "$runpath_var"; then
4156
case "$finalize_perm_rpath " in
4158
*) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;;
4162
# Substitute the hardcoded libdirs into the rpath.
4163
if test -n "$hardcode_libdir_separator" &&
4164
test -n "$hardcode_libdirs"; then
4165
libdir="$hardcode_libdirs"
4166
eval rpath=\" $hardcode_libdir_flag_spec\"
4168
finalize_rpath="$rpath"
4170
if test -n "$libobjs" && test "$build_old_libs" = yes; then
4171
# Transform all the library objects into standard objects.
4172
compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
4173
finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
4177
if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
4178
if test -n "$NM" && test -n "$global_symbol_pipe"; then
4179
dlsyms="${outputname}S.c"
4181
$echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2
4185
if test -n "$dlsyms"; then
4189
# Discover the nlist of each of the dlfiles.
4190
nlist="$output_objdir/${outputname}.nm"
4192
$show "$rm $nlist ${nlist}S ${nlist}T"
4193
$run $rm "$nlist" "${nlist}S" "${nlist}T"
4195
# Parse the name list into a source file.
4196
$show "creating $output_objdir/$dlsyms"
4198
test -z "$run" && $echo > "$output_objdir/$dlsyms" "\
4199
/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */
4200
/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */
4206
/* Prevent the only kind of declaration conflicts we can make. */
4207
#define lt_preloaded_symbols some_other_symbol
4209
/* External symbol declarations for the compiler. */\
4212
if test "$dlself" = yes; then
4213
$show "generating symbol list for \`$output'"
4215
test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist"
4217
# Add our own program objects to the symbol list.
4218
progfiles=`$echo "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
4219
for arg in $progfiles; do
4220
$show "extracting global C symbols from \`$arg'"
4221
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
4224
if test -n "$exclude_expsyms"; then
4225
$run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
4226
$run eval '$mv "$nlist"T "$nlist"'
4229
if test -n "$export_symbols_regex"; then
4230
$run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
4231
$run eval '$mv "$nlist"T "$nlist"'
4234
# Prepare the list of exported symbols
4235
if test -z "$export_symbols"; then
4236
export_symbols="$output_objdir/$output.exp"
4237
$run $rm $export_symbols
4238
$run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
4240
$run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"'
4241
$run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T'
4242
$run eval 'mv "$nlist"T "$nlist"'
4246
for arg in $dlprefiles; do
4247
$show "extracting global C symbols from \`$arg'"
4248
name=`$echo "$arg" | ${SED} -e 's%^.*/%%'`
4249
$run eval '$echo ": $name " >> "$nlist"'
4250
$run eval "$NM $arg | $global_symbol_pipe >> '$nlist'"
4253
if test -z "$run"; then
4254
# Make sure we have at least an empty file.
4255
test -f "$nlist" || : > "$nlist"
4257
if test -n "$exclude_expsyms"; then
4258
$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
4259
$mv "$nlist"T "$nlist"
4262
# Try sorting and uniquifying the output.
4263
if grep -v "^: " < "$nlist" |
4264
if sort -k 3 </dev/null >/dev/null 2>&1; then
4269
uniq > "$nlist"S; then
4272
grep -v "^: " < "$nlist" > "$nlist"S
4275
if test -f "$nlist"S; then
4276
eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"'
4278
$echo '/* NONE */' >> "$output_objdir/$dlsyms"
4281
$echo >> "$output_objdir/$dlsyms" "\
4283
#undef lt_preloaded_symbols
4285
#if defined (__STDC__) && __STDC__
4286
# define lt_ptr void *
4288
# define lt_ptr char *
4292
/* The mapping between symbol names and symbols. */
4297
lt_preloaded_symbols[] =
4301
eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$dlsyms"
4303
$echo >> "$output_objdir/$dlsyms" "\
4307
/* This works around a problem in FreeBSD linker */
4308
#ifdef FREEBSD_WORKAROUND
4309
static const void *lt_preloaded_setup() {
4310
return lt_preloaded_symbols;
4320
pic_flag_for_symtable=
4322
# compiling the symbol table file with pic_flag works around
4323
# a FreeBSD bug that causes programs to crash when -lm is
4324
# linked before any other PIC object. But we must not use
4325
# pic_flag when linking with -static. The problem exists in
4326
# FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
4327
*-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
4328
case "$compile_command " in
4330
*) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";;
4333
case "$compile_command " in
4335
*) pic_flag_for_symtable=" $pic_flag";;
4339
# Now compile the dynamic symbol file.
4340
$show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")"
4341
$run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $?
4343
# Clean up the generated files.
4344
$show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T"
4345
$run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T"
4347
# Transform the symbol file into the correct name.
4348
compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4349
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
4352
$echo "$modename: unknown suffix for \`$dlsyms'" 1>&2
4357
# We keep going just in case the user didn't refer to
4358
# lt_preloaded_symbols. The linker will fail if global_symbol_pipe
4359
# really was required.
4361
# Nullify the symbol file.
4362
compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
4363
finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
4366
# AIX runtime linking requires linking programs with -Wl,-brtl and libs with -Wl,-G
4367
# Also add -bnolibpath to the beginning of the link line, to clear the hardcoded runpath.
4368
# Otherwise, things like the -L path to libgcc.a are accidentally hardcoded by ld.
4369
# This does not apply on AIX for ia64, which uses a SysV linker.
4372
*-*-aix4* | *-*-aix5*)
4373
compile_command=`$echo "X$compile_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"`
4374
finalize_command=`$echo "X$finalize_command $wl-brtl" | $Xsed -e "s/\$CC/\$CC $wl-bnolibpath/1"` ;;
4377
if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
4378
# Replace the output file specification.
4379
compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
4380
link_command="$compile_command$compile_rpath"
4382
# We have no uninstalled library dependencies, so finalize right now.
4383
$show "$link_command"
4384
$run eval "$link_command"
4387
# Delete the generated files.
4388
if test -n "$dlsyms"; then
4389
$show "$rm $output_objdir/${outputname}S.${objext}"
4390
$run $rm "$output_objdir/${outputname}S.${objext}"
4396
if test -n "$shlibpath_var"; then
4397
# We should set the shlibpath_var
4399
for dir in $temp_rpath; do
4401
[\\/]* | [A-Za-z]:[\\/]*)
4406
# Relative path: add a thisdir entry.
4407
rpath="$rpath\$thisdir/$dir:"
4414
if test -n "$compile_shlibpath$finalize_shlibpath"; then
4415
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
4417
if test -n "$finalize_shlibpath"; then
4418
finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
4423
if test -n "$runpath_var"; then
4424
if test -n "$perm_rpath"; then
4425
# We should set the runpath_var.
4427
for dir in $perm_rpath; do
4430
compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
4432
if test -n "$finalize_perm_rpath"; then
4433
# We should set the runpath_var.
4435
for dir in $finalize_perm_rpath; do
4438
finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
4442
if test "$no_install" = yes; then
4443
# We don't need to create a wrapper script.
4444
link_command="$compile_var$compile_command$compile_rpath"
4445
# Replace the output file specification.
4446
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
4447
# Delete the old output file.
4449
# Link the executable and exit
4450
$show "$link_command"
4451
$run eval "$link_command" || exit $?
4455
if test "$hardcode_action" = relink; then
4456
# Fast installation is not supported
4457
link_command="$compile_var$compile_command$compile_rpath"
4458
relink_command="$finalize_var$finalize_command$finalize_rpath"
4460
$echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2
4461
$echo "$modename: \`$output' will be relinked during installation" 1>&2
4463
if test "$fast_install" != no; then
4464
link_command="$finalize_var$compile_command$finalize_rpath"
4465
if test "$fast_install" = yes; then
4466
relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
4468
# fast_install is set to needless
4472
link_command="$compile_var$compile_command$compile_rpath"
4473
relink_command="$finalize_var$finalize_command$finalize_rpath"
4477
# Replace the output file specification.
4478
link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
4480
# Delete the old output files.
4481
$run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname
4483
$show "$link_command"
4484
$run eval "$link_command" || exit $?
4486
# Now create the wrapper script.
4487
$show "creating $output"
4489
# Quote the relink command for shipping.
4490
if test -n "$relink_command"; then
4491
# Preserve any variables that may affect compiler behavior
4492
for var in $variables_saved_for_relink; do
4493
if eval test -z \"\${$var+set}\"; then
4494
relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
4495
elif eval var_value=\$$var; test -z "$var_value"; then
4496
relink_command="$var=; export $var; $relink_command"
4498
var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
4499
relink_command="$var=\"$var_value\"; export $var; $relink_command"
4502
relink_command="(cd `pwd`; $relink_command)"
4503
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
4506
# Quote $echo for shipping.
4507
if test "X$echo" = "X$SHELL $0 --fallback-echo"; then
4509
[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";;
4510
*) qecho="$SHELL `pwd`/$0 --fallback-echo";;
4512
qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"`
4514
qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"`
4517
# Only actually do things if our run command is non-null.
4518
if test -z "$run"; then
4519
# win32 will think the script is a binary if it has
4520
# a .exe suffix, so we strip it off here.
4522
*.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;;
4524
# test for cygwin because mv fails w/o .exe extensions
4528
outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;;
4532
*cygwin* | *mingw* )
4533
cwrappersource=`$echo ${objdir}/lt-${output}.c`
4534
cwrapper=`$echo ${output}.exe`
4535
$rm $cwrappersource $cwrapper
4536
trap "$rm $cwrappersource $cwrapper; exit 1" 1 2 15
4538
cat > $cwrappersource <<EOF
4540
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
4541
Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
4543
The $output program cannot be directly executed until all the libtool
4544
libraries that it depends on are installed.
4546
This wrapper executable should never be moved out of the build directory.
4547
If it is, it will not operate correctly.
4549
Currently, it simply execs the wrapper *script* "/bin/sh $output",
4550
but could eventually absorb all of the scripts functionality and
4551
exec $objdir/$outputname directly.
4554
cat >> $cwrappersource<<"EOF"
4562
#if defined(PATH_MAX)
4563
# define LT_PATHMAX PATH_MAX
4564
#elif defined(MAXPATHLEN)
4565
# define LT_PATHMAX MAXPATHLEN
4567
# define LT_PATHMAX 1024
4570
#ifndef DIR_SEPARATOR
4571
#define DIR_SEPARATOR '/'
4574
#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
4576
#define HAVE_DOS_BASED_FILE_SYSTEM
4577
#ifndef DIR_SEPARATOR_2
4578
#define DIR_SEPARATOR_2 '\\'
4582
#ifndef DIR_SEPARATOR_2
4583
# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
4584
#else /* DIR_SEPARATOR_2 */
4585
# define IS_DIR_SEPARATOR(ch) \
4586
(((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
4587
#endif /* DIR_SEPARATOR_2 */
4589
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
4590
#define XFREE(stale) do { \
4591
if (stale) { free ((void *) stale); stale = 0; } \
4594
const char *program_name = NULL;
4596
void * xmalloc (size_t num);
4597
char * xstrdup (const char *string);
4598
char * basename (const char *name);
4599
char * fnqualify(const char *path);
4600
char * strendzap(char *str, const char *pat);
4601
void lt_fatal (const char *message, ...);
4604
main (int argc, char *argv[])
4609
program_name = (char *) xstrdup ((char *) basename (argv[0]));
4610
newargz = XMALLOC(char *, argc+2);
4613
cat >> $cwrappersource <<EOF
4614
newargz[0] = "$SHELL";
4617
cat >> $cwrappersource <<"EOF"
4618
newargz[1] = fnqualify(argv[0]);
4619
/* we know the script has the same name, without the .exe */
4620
/* so make sure newargz[1] doesn't end in .exe */
4621
strendzap(newargz[1],".exe");
4622
for (i = 1; i < argc; i++)
4623
newargz[i+1] = xstrdup(argv[i]);
4624
newargz[argc+1] = NULL;
4627
cat >> $cwrappersource <<EOF
4628
execv("$SHELL",newargz);
4631
cat >> $cwrappersource <<"EOF"
4635
xmalloc (size_t num)
4637
void * p = (void *) malloc (num);
4639
lt_fatal ("Memory exhausted");
4645
xstrdup (const char *string)
4647
return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL
4652
basename (const char *name)
4656
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
4657
/* Skip over the disk name in MSDOS pathnames. */
4658
if (isalpha (name[0]) && name[1] == ':')
4662
for (base = name; *name; name++)
4663
if (IS_DIR_SEPARATOR (*name))
4665
return (char *) base;
4669
fnqualify(const char *path)
4673
char tmp[LT_PATHMAX + 1];
4675
assert(path != NULL);
4677
/* Is it qualified already? */
4678
#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
4679
if (isalpha (path[0]) && path[1] == ':')
4680
return xstrdup (path);
4682
if (IS_DIR_SEPARATOR (path[0]))
4683
return xstrdup (path);
4685
/* prepend the current directory */
4686
/* doesn't handle '~' */
4687
if (getcwd (tmp, LT_PATHMAX) == NULL)
4688
lt_fatal ("getcwd failed");
4689
size = strlen(tmp) + 1 + strlen(path) + 1; /* +2 for '/' and '\0' */
4690
p = XMALLOC(char, size);
4691
sprintf(p, "%s%c%s", tmp, DIR_SEPARATOR, path);
4696
strendzap(char *str, const char *pat)
4700
assert(str != NULL);
4701
assert(pat != NULL);
4704
patlen = strlen(pat);
4708
str += len - patlen;
4709
if (strcmp(str, pat) == 0)
4716
lt_error_core (int exit_status, const char * mode,
4717
const char * message, va_list ap)
4719
fprintf (stderr, "%s: %s: ", program_name, mode);
4720
vfprintf (stderr, message, ap);
4721
fprintf (stderr, ".\n");
4723
if (exit_status >= 0)
4728
lt_fatal (const char *message, ...)
4731
va_start (ap, message);
4732
lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
4736
# we should really use a build-platform specific compiler
4737
# here, but OTOH, the wrappers (shell script and this C one)
4738
# are only useful if you want to execute the "real" binary.
4739
# Since the "real" binary is built for $host, then this
4740
# wrapper might as well be built for $host, too.
4741
$run $LTCC -s -o $cwrapper $cwrappersource
4745
trap "$rm $output; exit 1" 1 2 15
4750
# $output - temporary wrapper script for $objdir/$outputname
4751
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
4753
# The $output program cannot be directly executed until all the libtool
4754
# libraries that it depends on are installed.
4756
# This wrapper script should never be moved out of the build directory.
4757
# If it is, it will not operate correctly.
4759
# Sed substitution that helps us do robust quoting. It backslashifies
4760
# metacharacters that are still active within double-quoted strings.
4761
Xsed='${SED} -e 1s/^X//'
4762
sed_quote_subst='$sed_quote_subst'
4764
# The HP-UX ksh and POSIX shell print the target directory to stdout
4766
if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi
4768
relink_command=\"$relink_command\"
4770
# This environment variable determines our operation mode.
4771
if test \"\$libtool_install_magic\" = \"$magic\"; then
4772
# install mode needs the following variable:
4773
notinst_deplibs='$notinst_deplibs'
4775
# When we are sourced in execute mode, \$file and \$echo are already set.
4776
if test \"\$libtool_execute_magic\" != \"$magic\"; then
4779
# Make sure echo works.
4780
if test \"X\$1\" = X--no-reexec; then
4781
# Discard the --no-reexec flag, and continue.
4783
elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then
4784
# Yippee, \$echo works!
4787
# Restart under the correct shell, and then maybe \$echo will work.
4788
exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
4794
# Find the directory that this script lives in.
4795
thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
4796
test \"x\$thisdir\" = \"x\$file\" && thisdir=.
4798
# Follow symbolic links until we get to the real thisdir.
4799
file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
4800
while test -n \"\$file\"; do
4801
destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
4803
# If there was a directory component, then change thisdir.
4804
if test \"x\$destdir\" != \"x\$file\"; then
4805
case \"\$destdir\" in
4806
[\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
4807
*) thisdir=\"\$thisdir/\$destdir\" ;;
4811
file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
4812
file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
4815
# Try to get the absolute directory name.
4816
absdir=\`cd \"\$thisdir\" && pwd\`
4817
test -n \"\$absdir\" && thisdir=\"\$absdir\"
4820
if test "$fast_install" = yes; then
4822
program=lt-'$outputname'$exeext
4823
progdir=\"\$thisdir/$objdir\"
4825
if test ! -f \"\$progdir/\$program\" || \\
4826
{ file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
4827
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
4829
file=\"\$\$-\$program\"
4831
if test ! -d \"\$progdir\"; then
4832
$mkdir \"\$progdir\"
4834
$rm \"\$progdir/\$file\"
4839
# relink executable if necessary
4840
if test -n \"\$relink_command\"; then
4841
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
4843
$echo \"\$relink_command_output\" >&2
4844
$rm \"\$progdir/\$file\"
4849
$mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
4850
{ $rm \"\$progdir/\$program\";
4851
$mv \"\$progdir/\$file\" \"\$progdir/\$program\"; }
4852
$rm \"\$progdir/\$file\"
4856
program='$outputname'
4857
progdir=\"\$thisdir/$objdir\"
4863
if test -f \"\$progdir/\$program\"; then"
4865
# Export our shlibpath_var if we have one.
4866
if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
4868
# Add our own library path to $shlibpath_var
4869
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
4871
# Some systems cannot cope with colon-terminated $shlibpath_var
4872
# The second colon is a workaround for a bug in BeOS R4 sed
4873
$shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
4875
export $shlibpath_var
4879
# fixup the dll searchpath if we need to.
4880
if test -n "$dllsearchpath"; then
4882
# Add the dll search path components to the executable PATH
4883
PATH=$dllsearchpath:\$PATH
4888
if test \"\$libtool_execute_magic\" != \"$magic\"; then
4889
# Run the actual program with our arguments.
4892
# Backslashes separate directories on plain windows
4893
*-*-mingw | *-*-os2*)
4895
exec \$progdir\\\\\$program \${1+\"\$@\"}
4901
exec \$progdir/\$program \${1+\"\$@\"}
4906
\$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
4910
# The program doesn't exist.
4911
\$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2
4912
\$echo \"This script is just a wrapper for \$program.\" 1>&2
4913
$echo \"See the $PACKAGE documentation for more information.\" 1>&2
4924
# See if we need to build an old-fashioned archive.
4925
for oldlib in $oldlibs; do
4927
if test "$build_libtool_libs" = convenience; then
4928
oldobjs="$libobjs_save"
4929
addlibs="$convenience"
4930
build_libtool_libs=no
4932
if test "$build_libtool_libs" = module; then
4933
oldobjs="$libobjs_save"
4934
build_libtool_libs=no
4936
oldobjs="$old_deplibs $non_pic_objects"
4938
addlibs="$old_convenience"
4941
if test -n "$addlibs"; then
4942
gentop="$output_objdir/${outputname}x"
4943
$show "${rm}r $gentop"
4944
$run ${rm}r "$gentop"
4945
$show "$mkdir $gentop"
4946
$run $mkdir "$gentop"
4948
if test "$status" -ne 0 && test ! -d "$gentop"; then
4951
generated="$generated $gentop"
4953
# Add in members from convenience archives.
4954
for xlib in $addlibs; do
4955
# Extract the objects.
4957
[\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;;
4958
*) xabs=`pwd`"/$xlib" ;;
4960
xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'`
4961
xdir="$gentop/$xlib"
4963
$show "${rm}r $xdir"
4965
$show "$mkdir $xdir"
4968
if test "$status" -ne 0 && test ! -d "$xdir"; then
4971
# We will extract separately just the conflicting names and we will no
4972
# longer touch any unique names. It is faster to leave these extract
4973
# automatically by $AR in one run.
4974
$show "(cd $xdir && $AR x $xabs)"
4975
$run eval "(cd \$xdir && $AR x \$xabs)" || exit $?
4976
if ($AR t "$xabs" | sort | sort -uc >/dev/null 2>&1); then
4979
$echo "$modename: warning: object name conflicts; renaming object files" 1>&2
4980
$echo "$modename: warning: to ensure that they will not overwrite" 1>&2
4981
$AR t "$xabs" | sort | uniq -cd | while read -r count name
4984
while test "$i" -le "$count"
4986
# Put our $i before any first dot (extension)
4987
# Never overwrite any file
4989
while test "X$name_to" = "X$name" || test -f "$xdir/$name_to"
4991
name_to=`$echo "X$name_to" | $Xsed -e "s/\([^.]*\)/\1-$i/"`
4993
$show "(cd $xdir && $AR xN $i $xabs '$name' && $mv '$name' '$name_to')"
4994
$run eval "(cd \$xdir && $AR xN $i \$xabs '$name' && $mv '$name' '$name_to')" || exit $?
5000
oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP`
5004
compiler_flags="$compiler_flags $add_flags"
5006
# Do each command in the archive commands.
5007
if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
5008
eval cmds=\"$old_archive_from_new_cmds\"
5010
eval cmds=\"$old_archive_cmds\"
5012
if len=`expr "X$cmds" : ".*"` &&
5013
test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then
5016
# the command line is too long to link in one step, link in parts
5017
$echo "using piecewise archive linking..."
5022
save_oldobjs=$oldobjs
5023
# GNU ar 2.10+ was changed to match POSIX; thus no paths are
5024
# encoded into archives. This makes 'ar r' malfunction in
5025
# this piecewise linking case whenever conflicting object
5026
# names appear in distinct ar calls; check, warn and compensate.
5027
if (for obj in $save_oldobjs
5029
$echo "X$obj" | $Xsed -e 's%^.*/%%'
5030
done | sort | sort -uc >/dev/null 2>&1); then
5033
$echo "$modename: warning: object name conflicts; overriding AR_FLAGS to 'cq'" 1>&2
5034
$echo "$modename: warning: to ensure that POSIX-compatible ar will work" 1>&2
5037
# Is there a better way of finding the last object in the list?
5038
for obj in $save_oldobjs
5042
for obj in $save_oldobjs
5044
oldobjs="$objlist $obj"
5045
objlist="$objlist $obj"
5046
eval test_cmds=\"$old_archive_cmds\"
5047
if len=`expr "X$test_cmds" : ".*"` &&
5048
test "$len" -le "$max_cmd_len"; then
5051
# the above command should be used before it gets too long
5053
if test "$obj" = "$last_oldobj" ; then
5056
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
5057
eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
5063
if test "X$oldobjs" = "X" ; then
5064
eval cmds=\"\$concat_cmds\"
5066
eval cmds=\"\$concat_cmds~$old_archive_cmds\"
5070
save_ifs="$IFS"; IFS='~'
5071
for cmd in $cmds; do
5074
$run eval "$cmd" || exit $?
5079
if test -n "$generated"; then
5080
$show "${rm}r$generated"
5081
$run ${rm}r$generated
5084
# Now create the libtool archive.
5088
test "$build_old_libs" = yes && old_library="$libname.$libext"
5089
$show "creating $output"
5091
# Preserve any variables that may affect compiler behavior
5092
for var in $variables_saved_for_relink; do
5093
if eval test -z \"\${$var+set}\"; then
5094
relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command"
5095
elif eval var_value=\$$var; test -z "$var_value"; then
5096
relink_command="$var=; export $var; $relink_command"
5098
var_value=`$echo "X$var_value" | $Xsed -e "$sed_quote_subst"`
5099
relink_command="$var=\"$var_value\"; export $var; $relink_command"
5102
# Quote the link command for shipping.
5103
relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)"
5104
relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
5105
if test "$hardcode_automatic" = yes ; then
5108
# Only create the output if not a dry run.
5109
if test -z "$run"; then
5110
for installed in no yes; do
5111
if test "$installed" = yes; then
5112
if test -z "$install_libdir"; then
5115
output="$output_objdir/$outputname"i
5116
# Replace all uninstalled libtool libraries with the installed ones
5118
for deplib in $dependency_libs; do
5121
name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'`
5122
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
5123
if test -z "$libdir"; then
5124
$echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2
5127
newdependency_libs="$newdependency_libs $libdir/$name"
5129
*) newdependency_libs="$newdependency_libs $deplib" ;;
5132
dependency_libs="$newdependency_libs"
5134
for lib in $dlfiles; do
5135
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
5136
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
5137
if test -z "$libdir"; then
5138
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5141
newdlfiles="$newdlfiles $libdir/$name"
5143
dlfiles="$newdlfiles"
5145
for lib in $dlprefiles; do
5146
name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'`
5147
eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
5148
if test -z "$libdir"; then
5149
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5152
newdlprefiles="$newdlprefiles $libdir/$name"
5154
dlprefiles="$newdlprefiles"
5157
# place dlname in correct position for cygwin
5159
case $host,$output,$installed,$module,$dlname in
5160
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
5163
# $outputname - a libtool library file
5164
# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP
5166
# Please DO NOT delete this file!
5167
# It is necessary for linking the library.
5169
# The name that we can dlopen(3).
5172
# Names of this library.
5173
library_names='$library_names'
5175
# The name of the static archive.
5176
old_library='$old_library'
5178
# Libraries that this one depends upon.
5179
dependency_libs='$dependency_libs'
5181
# Version information for $libname.
5186
# Is this an already installed library?
5187
installed=$installed
5189
# Should we warn about portability when linking against -modules?
5190
shouldnotlink=$module
5192
# Files to dlopen/dlpreopen
5194
dlpreopen='$dlprefiles'
5196
# Directory that this library needs to be installed in:
5197
libdir='$install_libdir'"
5198
if test "$installed" = no && test "$need_relink" = yes && test "$fast_install" = no; then
5200
relink_command=\"$relink_command\""
5205
# Do a symbolic link so that the libtool archive can be found in
5206
# LD_LIBRARY_PATH before the program is installed.
5207
$show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)"
5208
$run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $?
5214
# libtool install mode
5216
modename="$modename: install"
5218
# There may be an optional sh(1) argument at the beginning of
5219
# install_prog (especially on Windows NT).
5220
if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
5221
# Allow the use of GNU shtool's install command.
5222
$echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then
5223
# Aesthetically quote it.
5224
arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"`
5226
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
5230
install_prog="$arg "
5238
# The real first argument should be the name of the installation program.
5239
# Aesthetically quote it.
5240
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
5242
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
5246
install_prog="$install_prog$arg"
5248
# We need to accept at least all the BSD install flags.
5258
if test -n "$dest"; then
5259
files="$files $dest"
5277
# If the previous option needed an argument, then skip it.
5278
if test -n "$prev"; then
5287
# Aesthetically quote the argument.
5288
arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"`
5290
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*)
5294
install_prog="$install_prog $arg"
5297
if test -z "$install_prog"; then
5298
$echo "$modename: you must specify an install program" 1>&2
5303
if test -n "$prev"; then
5304
$echo "$modename: the \`$prev' option requires an argument" 1>&2
5309
if test -z "$files"; then
5310
if test -z "$dest"; then
5311
$echo "$modename: no file or destination specified" 1>&2
5313
$echo "$modename: you must specify a destination" 1>&2
5319
# Strip any trailing slash from the destination.
5320
dest=`$echo "X$dest" | $Xsed -e 's%/$%%'`
5322
# Check to see that the destination is a directory.
5323
test -d "$dest" && isdir=yes
5324
if test "$isdir" = yes; then
5328
destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'`
5329
test "X$destdir" = "X$dest" && destdir=.
5330
destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'`
5332
# Not a directory, so check to see that there is only one file specified.
5334
if test "$#" -gt 2; then
5335
$echo "$modename: \`$dest' is not a directory" 1>&2
5341
[\\/]* | [A-Za-z]:[\\/]*) ;;
5343
for file in $files; do
5347
$echo "$modename: \`$destdir' must be an absolute directory name" 1>&2
5356
# This variable tells wrapper scripts just to set variables rather
5357
# than running their programs.
5358
libtool_install_magic="$magic"
5363
for file in $files; do
5365
# Do each installation.
5368
# Do the static libraries later.
5369
staticlibs="$staticlibs $file"
5373
# Check to see that this really is a libtool archive.
5374
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
5376
$echo "$modename: \`$file' is not a valid libtool archive" 1>&2
5384
# If there is no directory component, then add one.
5386
*/* | *\\*) . $file ;;
5390
# Add the libdir to current_libdirs if it is the destination.
5391
if test "X$destdir" = "X$libdir"; then
5392
case "$current_libdirs " in
5394
*) current_libdirs="$current_libdirs $libdir" ;;
5397
# Note the libdir as a future libdir.
5398
case "$future_libdirs " in
5400
*) future_libdirs="$future_libdirs $libdir" ;;
5404
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/
5405
test "X$dir" = "X$file/" && dir=
5408
if test -n "$relink_command"; then
5409
# Determine the prefix the user has applied to our future dir.
5410
inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"`
5412
# Don't allow the user to place us outside of our expected
5413
# location b/c this prevents finding dependent libraries that
5414
# are installed to the same prefix.
5415
# At present, this check doesn't affect windows .dll's that
5416
# are installed into $libdir/../bin (currently, that works fine)
5417
# but it's something to keep an eye on.
5418
if test "$inst_prefix_dir" = "$destdir"; then
5419
$echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2
5423
if test -n "$inst_prefix_dir"; then
5424
# Stick the inst_prefix_dir data into the link command.
5425
relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
5427
relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
5430
$echo "$modename: warning: relinking \`$file'" 1>&2
5431
$show "$relink_command"
5432
if $run eval "$relink_command"; then :
5434
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
5439
# See the names of the shared library.
5440
set dummy $library_names
5441
if test -n "$2"; then
5447
test -n "$relink_command" && srcname="$realname"T
5449
# Install the shared library and build the symlinks.
5450
$show "$install_prog $dir/$srcname $destdir/$realname"
5451
$run eval "$install_prog $dir/$srcname $destdir/$realname" || exit $?
5452
if test -n "$stripme" && test -n "$striplib"; then
5453
$show "$striplib $destdir/$realname"
5454
$run eval "$striplib $destdir/$realname" || exit $?
5457
if test "$#" -gt 0; then
5458
# Delete the old symlinks, and create new ones.
5461
if test "$linkname" != "$realname"; then
5462
$show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
5463
$run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)"
5468
# Do each command in the postinstall commands.
5469
lib="$destdir/$realname"
5470
eval cmds=\"$postinstall_cmds\"
5471
save_ifs="$IFS"; IFS='~'
5472
for cmd in $cmds; do
5475
$run eval "$cmd" || exit $?
5480
# Install the pseudo-library for information purposes.
5481
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5482
instname="$dir/$name"i
5483
$show "$install_prog $instname $destdir/$name"
5484
$run eval "$install_prog $instname $destdir/$name" || exit $?
5486
# Maybe install the static library, too.
5487
test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library"
5491
# Install (i.e. copy) a libtool object.
5493
# Figure out destination file name, if it wasn't already specified.
5494
if test -n "$destname"; then
5495
destfile="$destdir/$destname"
5497
destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5498
destfile="$destdir/$destfile"
5501
# Deduce the name of the destination old-style object file.
5504
staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"`
5507
staticdest="$destfile"
5511
$echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2
5517
# Install the libtool object if requested.
5518
if test -n "$destfile"; then
5519
$show "$install_prog $file $destfile"
5520
$run eval "$install_prog $file $destfile" || exit $?
5523
# Install the old object if enabled.
5524
if test "$build_old_libs" = yes; then
5525
# Deduce the name of the old-style object file.
5526
staticobj=`$echo "X$file" | $Xsed -e "$lo2o"`
5528
$show "$install_prog $staticobj $staticdest"
5529
$run eval "$install_prog \$staticobj \$staticdest" || exit $?
5535
# Figure out destination file name, if it wasn't already specified.
5536
if test -n "$destname"; then
5537
destfile="$destdir/$destname"
5539
destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5540
destfile="$destdir/$destfile"
5543
# If the file is missing, and there is a .exe on the end, strip it
5544
# because it is most likely a libtool script we actually want to
5549
if test ! -f "$file"; then
5550
file=`$echo $file|${SED} 's,.exe$,,'`
5556
# Do a test to see if this is really a libtool program.
5559
wrapper=`$echo $file | ${SED} -e 's,.exe$,,'`
5565
if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then
5569
# To insure that "foo" is sourced, and not "foo.exe",
5570
# finese the cygwin/MSYS system by explicitly sourcing "foo."
5571
# which disallows the automatic-append-.exe behavior.
5573
*cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
5574
*) wrapperdot=${wrapper} ;;
5576
# If there is no directory component, then add one.
5578
*/* | *\\*) . ${wrapperdot} ;;
5579
*) . ./${wrapperdot} ;;
5582
# Check the variables that should have been set.
5583
if test -z "$notinst_deplibs"; then
5584
$echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2
5589
for lib in $notinst_deplibs; do
5590
# Check to see that each library is installed.
5592
if test -f "$lib"; then
5593
# If there is no directory component, then add one.
5595
*/* | *\\*) . $lib ;;
5599
libfile="$libdir/"`$echo "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
5600
if test -n "$libdir" && test ! -f "$libfile"; then
5601
$echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2
5607
# To insure that "foo" is sourced, and not "foo.exe",
5608
# finese the cygwin/MSYS system by explicitly sourcing "foo."
5609
# which disallows the automatic-append-.exe behavior.
5611
*cygwin* | *mingw*) wrapperdot=${wrapper}. ;;
5612
*) wrapperdot=${wrapper} ;;
5614
# If there is no directory component, then add one.
5616
*/* | *\\*) . ${wrapperdot} ;;
5617
*) . ./${wrapperdot} ;;
5621
if test "$fast_install" = no && test -n "$relink_command"; then
5622
if test "$finalize" = yes && test -z "$run"; then
5624
test -n "$TMPDIR" && tmpdir="$TMPDIR"
5625
tmpdir="$tmpdir/libtool-$$"
5626
if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then :
5628
$echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2
5631
file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
5632
outputname="$tmpdir/$file"
5633
# Replace the output file specification.
5634
relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
5636
$show "$relink_command"
5637
if $run eval "$relink_command"; then :
5639
$echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2
5645
$echo "$modename: warning: cannot relink \`$file'" 1>&2
5648
# Install the binary that we compiled earlier.
5649
file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
5653
# remove .exe since cygwin /usr/bin/install will append another
5655
case $install_prog,$host in
5656
*/usr/bin/install*,*cygwin*)
5657
case $file:$destfile in
5662
destfile=$destfile.exe
5665
destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'`
5670
$show "$install_prog$stripme $file $destfile"
5671
$run eval "$install_prog\$stripme \$file \$destfile" || exit $?
5672
test -n "$outputname" && ${rm}r "$tmpdir"
5677
for file in $staticlibs; do
5678
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5680
# Set up the ranlib parameters.
5681
oldlib="$destdir/$name"
5683
$show "$install_prog $file $oldlib"
5684
$run eval "$install_prog \$file \$oldlib" || exit $?
5686
if test -n "$stripme" && test -n "$striplib"; then
5687
$show "$old_striplib $oldlib"
5688
$run eval "$old_striplib $oldlib" || exit $?
5691
# Do each command in the postinstall commands.
5692
eval cmds=\"$old_postinstall_cmds\"
5693
save_ifs="$IFS"; IFS='~'
5694
for cmd in $cmds; do
5697
$run eval "$cmd" || exit $?
5702
if test -n "$future_libdirs"; then
5703
$echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2
5706
if test -n "$current_libdirs"; then
5707
# Maybe just do a dry run.
5708
test -n "$run" && current_libdirs=" -n$current_libdirs"
5709
exec_cmd='$SHELL $0 --finish$current_libdirs'
5715
# libtool finish mode
5717
modename="$modename: finish"
5721
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
5724
libdirs="$libdirs $dir"
5727
for libdir in $libdirs; do
5728
if test -n "$finish_cmds"; then
5729
# Do each command in the finish commands.
5730
eval cmds=\"$finish_cmds\"
5731
save_ifs="$IFS"; IFS='~'
5732
for cmd in $cmds; do
5735
$run eval "$cmd" || admincmds="$admincmds
5740
if test -n "$finish_eval"; then
5741
# Do the single finish_eval.
5742
eval cmds=\"$finish_eval\"
5743
$run eval "$cmds" || admincmds="$admincmds
5749
# Exit here if they wanted silent mode.
5752
$echo "----------------------------------------------------------------------"
5753
$echo "Libraries have been installed in:"
5754
for libdir in $libdirs; do
5758
$echo "If you ever happen to want to link against installed libraries"
5759
$echo "in a given directory, LIBDIR, you must either use libtool, and"
5760
$echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
5761
$echo "flag during linking and do at least one of the following:"
5762
if test -n "$shlibpath_var"; then
5763
$echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
5764
$echo " during execution"
5766
if test -n "$runpath_var"; then
5767
$echo " - add LIBDIR to the \`$runpath_var' environment variable"
5768
$echo " during linking"
5770
if test -n "$hardcode_libdir_flag_spec"; then
5772
eval flag=\"$hardcode_libdir_flag_spec\"
5774
$echo " - use the \`$flag' linker flag"
5776
if test -n "$admincmds"; then
5777
$echo " - have your system administrator run these commands:$admincmds"
5779
if test -f /etc/ld.so.conf; then
5780
$echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
5783
$echo "See any operating system documentation about shared libraries for"
5784
$echo "more information, such as the ld(1) and ld.so(8) manual pages."
5785
$echo "----------------------------------------------------------------------"
5789
# libtool execute mode
5791
modename="$modename: execute"
5793
# The first argument is the command name.
5795
if test -z "$cmd"; then
5796
$echo "$modename: you must specify a COMMAND" 1>&2
5801
# Handle -dlopen flags immediately.
5802
for file in $execute_dlfiles; do
5803
if test ! -f "$file"; then
5804
$echo "$modename: \`$file' is not a file" 1>&2
5812
# Check to see that this really is a libtool archive.
5813
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then :
5815
$echo "$modename: \`$lib' is not a valid libtool archive" 1>&2
5820
# Read the libtool library.
5824
# If there is no directory component, then add one.
5826
*/* | *\\*) . $file ;;
5830
# Skip this library if it cannot be dlopened.
5831
if test -z "$dlname"; then
5832
# Warn if it was a shared library.
5833
test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'"
5837
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
5838
test "X$dir" = "X$file" && dir=.
5840
if test -f "$dir/$objdir/$dlname"; then
5843
$echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2
5849
# Just add the directory containing the .lo file.
5850
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
5851
test "X$dir" = "X$file" && dir=.
5855
$echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2
5860
# Get the absolute pathname.
5861
absdir=`cd "$dir" && pwd`
5862
test -n "$absdir" && dir="$absdir"
5864
# Now add the directory to shlibpath_var.
5865
if eval "test -z \"\$$shlibpath_var\""; then
5866
eval "$shlibpath_var=\"\$dir\""
5868
eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
5872
# This variable tells wrapper scripts just to set shlibpath_var
5873
# rather than running their programs.
5874
libtool_execute_magic="$magic"
5876
# Check if any of the arguments is a wrapper script.
5883
# Do a test to see if this is really a libtool program.
5884
if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
5885
# If there is no directory component, then add one.
5887
*/* | *\\*) . $file ;;
5891
# Transform arg to wrapped name.
5892
file="$progdir/$program"
5896
# Quote arguments (to preserve shell metacharacters).
5897
file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"`
5898
args="$args \"$file\""
5901
if test -z "$run"; then
5902
if test -n "$shlibpath_var"; then
5903
# Export the shlibpath_var.
5904
eval "export $shlibpath_var"
5907
# Restore saved environment variables
5908
if test "${save_LC_ALL+set}" = set; then
5909
LC_ALL="$save_LC_ALL"; export LC_ALL
5911
if test "${save_LANG+set}" = set; then
5912
LANG="$save_LANG"; export LANG
5915
# Now prepare to actually exec the command.
5916
exec_cmd="\$cmd$args"
5918
# Display what would be done.
5919
if test -n "$shlibpath_var"; then
5920
eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\""
5921
$echo "export $shlibpath_var"
5928
# libtool clean and uninstall mode
5930
modename="$modename: $mode"
5936
# This variable tells wrapper scripts just to set variables rather
5937
# than running their programs.
5938
libtool_install_magic="$magic"
5943
-f) rm="$rm $arg"; rmforce=yes ;;
5944
-*) rm="$rm $arg" ;;
5945
*) files="$files $arg" ;;
5949
if test -z "$rm"; then
5950
$echo "$modename: you must specify an RM program" 1>&2
5957
origobjdir="$objdir"
5958
for file in $files; do
5959
dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`
5960
if test "X$dir" = "X$file"; then
5962
objdir="$origobjdir"
5964
objdir="$dir/$origobjdir"
5966
name=`$echo "X$file" | $Xsed -e 's%^.*/%%'`
5967
test "$mode" = uninstall && objdir="$dir"
5969
# Remember objdir for removal later, being careful to avoid duplicates
5970
if test "$mode" = clean; then
5973
*) rmdirs="$rmdirs $objdir" ;;
5977
# Don't error if the file doesn't exist and rm -f was used.
5978
if (test -L "$file") >/dev/null 2>&1 \
5979
|| (test -h "$file") >/dev/null 2>&1 \
5980
|| test -f "$file"; then
5982
elif test -d "$file"; then
5985
elif test "$rmforce" = yes; then
5993
# Possibly a libtool archive, so verify it.
5994
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
5997
# Delete the libtool libraries and symlinks.
5998
for n in $library_names; do
5999
rmfiles="$rmfiles $objdir/$n"
6001
test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library"
6002
test "$mode" = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i"
6004
if test "$mode" = uninstall; then
6005
if test -n "$library_names"; then
6006
# Do each command in the postuninstall commands.
6007
eval cmds=\"$postuninstall_cmds\"
6008
save_ifs="$IFS"; IFS='~'
6009
for cmd in $cmds; do
6013
if test "$?" -ne 0 && test "$rmforce" != yes; then
6020
if test -n "$old_library"; then
6021
# Do each command in the old_postuninstall commands.
6022
eval cmds=\"$old_postuninstall_cmds\"
6023
save_ifs="$IFS"; IFS='~'
6024
for cmd in $cmds; do
6028
if test "$?" -ne 0 && test "$rmforce" != yes; then
6034
# FIXME: should reinstall the best remaining shared library.
6040
# Possibly a libtool object, so verify it.
6041
if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6046
# Add PIC object to the list of files to remove.
6047
if test -n "$pic_object" \
6048
&& test "$pic_object" != none; then
6049
rmfiles="$rmfiles $dir/$pic_object"
6052
# Add non-PIC object to the list of files to remove.
6053
if test -n "$non_pic_object" \
6054
&& test "$non_pic_object" != none; then
6055
rmfiles="$rmfiles $dir/$non_pic_object"
6061
if test "$mode" = clean ; then
6065
file=`$echo $file|${SED} 's,.exe$,,'`
6066
noexename=`$echo $name|${SED} 's,.exe$,,'`
6067
# $file with .exe has already been added to rmfiles,
6068
# add $file without .exe
6069
rmfiles="$rmfiles $file"
6072
# Do a test to see if this is a libtool program.
6073
if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then
6077
# note $name still contains .exe if it was in $file originally
6078
# as does the version of $file that was added into $rmfiles
6079
rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}"
6080
if test "$fast_install" = yes && test -n "$relink_command"; then
6081
rmfiles="$rmfiles $objdir/lt-$name"
6083
if test "X$noexename" != "X$name" ; then
6084
rmfiles="$rmfiles $objdir/lt-${noexename}.c"
6090
$show "$rm $rmfiles"
6091
$run $rm $rmfiles || exit_status=1
6093
objdir="$origobjdir"
6095
# Try to remove the ${objdir}s in the directories where we deleted files
6096
for dir in $rmdirs; do
6097
if test -d "$dir"; then
6099
$run rmdir $dir >/dev/null 2>&1
6107
$echo "$modename: you must specify a MODE" 1>&2
6108
$echo "$generic_help" 1>&2
6113
if test -z "$exec_cmd"; then
6114
$echo "$modename: invalid operation mode \`$mode'" 1>&2
6115
$echo "$generic_help" 1>&2
6118
fi # test -z "$show_help"
6120
if test -n "$exec_cmd"; then
6125
# We need to display help for each of the modes.
6128
"Usage: $modename [OPTION]... [MODE-ARG]...
6130
Provide generalized library-building support services.
6132
--config show all configuration variables
6133
--debug enable verbose shell tracing
6134
-n, --dry-run display commands without modifying any files
6135
--features display basic configuration information and exit
6136
--finish same as \`--mode=finish'
6137
--help display this help message and exit
6138
--mode=MODE use operation mode MODE [default=inferred from MODE-ARGS]
6139
--quiet same as \`--silent'
6140
--silent don't print informational messages
6141
--tag=TAG use configuration variables from tag TAG
6142
--version print version information
6144
MODE must be one of the following:
6146
clean remove files from the build directory
6147
compile compile a source file into a libtool object
6148
execute automatically set library path, then run a program
6149
finish complete the installation of libtool libraries
6150
install install libraries or executables
6151
link create a library or an executable
6152
uninstall remove libraries from an installed directory
6154
MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for
6155
a more detailed description of MODE.
6157
Report bugs to <bug-libtool@gnu.org>."
6163
"Usage: $modename [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
6165
Remove files from the build directory.
6167
RM is the name of the program to use to delete files associated with each FILE
6168
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
6171
If FILE is a libtool library, object or program, all the files associated
6172
with it are deleted. Otherwise, only FILE itself is deleted using RM."
6177
"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
6179
Compile a source file into a libtool library object.
6181
This mode accepts the following additional options:
6183
-o OUTPUT-FILE set the output file name to OUTPUT-FILE
6184
-prefer-pic try to building PIC objects only
6185
-prefer-non-pic try to building non-PIC objects only
6186
-static always build a \`.o' file suitable for static linking
6188
COMPILE-COMMAND is a command to be used in creating a \`standard' object file
6189
from the given SOURCEFILE.
6191
The output file name is determined by removing the directory component from
6192
SOURCEFILE, then substituting the C source code suffix \`.c' with the
6193
library object suffix, \`.lo'."
6198
"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]...
6200
Automatically set library path, then run a program.
6202
This mode accepts the following additional options:
6204
-dlopen FILE add the directory containing FILE to the library path
6206
This mode sets the library path environment variable according to \`-dlopen'
6209
If any of the ARGS are libtool executable wrappers, then they are translated
6210
into their corresponding uninstalled binary, and any of their required library
6211
directories are added to the library path.
6213
Then, COMMAND is executed, with ARGS as arguments."
6218
"Usage: $modename [OPTION]... --mode=finish [LIBDIR]...
6220
Complete the installation of libtool libraries.
6222
Each LIBDIR is a directory that contains libtool libraries.
6224
The commands that this mode executes may require superuser privileges. Use
6225
the \`--dry-run' option if you just want to see what would be executed."
6230
"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND...
6232
Install executables or libraries.
6234
INSTALL-COMMAND is the installation command. The first component should be
6235
either the \`install' or \`cp' program.
6237
The rest of the components are interpreted as arguments to that command (only
6238
BSD-compatible install options are recognized)."
6243
"Usage: $modename [OPTION]... --mode=link LINK-COMMAND...
6245
Link object files or libraries together to form another library, or to
6246
create an executable program.
6248
LINK-COMMAND is a command using the C compiler that you would use to create
6249
a program from several object files.
6251
The following components of LINK-COMMAND are treated specially:
6253
-all-static do not do any dynamic linking at all
6254
-avoid-version do not add a version suffix if possible
6255
-dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
6256
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
6257
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
6258
-export-symbols SYMFILE
6259
try to export only the symbols listed in SYMFILE
6260
-export-symbols-regex REGEX
6261
try to export only the symbols matching REGEX
6262
-LLIBDIR search LIBDIR for required installed libraries
6263
-lNAME OUTPUT-FILE requires the installed library libNAME
6264
-module build a library that can dlopened
6265
-no-fast-install disable the fast-install mode
6266
-no-install link a not-installable executable
6267
-no-undefined declare that a library does not refer to external symbols
6268
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
6269
-objectlist FILE Use a list of object files found in FILE to specify objects
6270
-release RELEASE specify package release information
6271
-rpath LIBDIR the created library will eventually be installed in LIBDIR
6272
-R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
6273
-static do not do any dynamic linking of libtool libraries
6274
-version-info CURRENT[:REVISION[:AGE]]
6275
specify library version info [each variable defaults to 0]
6277
All other options (arguments beginning with \`-') are ignored.
6279
Every other argument is treated as a filename. Files ending in \`.la' are
6280
treated as uninstalled libtool libraries, other files are standard or library
6283
If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
6284
only library objects (\`.lo' files) may be specified, and \`-rpath' is
6285
required, except when creating a convenience library.
6287
If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
6288
using \`ar' and \`ranlib', or on Windows using \`lib'.
6290
If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
6291
is created, otherwise an executable program is created."
6296
"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
6298
Remove libraries from an installation directory.
6300
RM is the name of the program to use to delete files associated with each FILE
6301
(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
6304
If FILE is a libtool library, all the files associated with it are deleted.
6305
Otherwise, only FILE itself is deleted using RM."
6309
$echo "$modename: invalid operation mode \`$mode'" 1>&2
6316
$echo "Try \`$modename --help' for more information about other modes."
6320
# The TAGs below are defined such that we never get into a situation
6321
# in which we disable both kinds of libraries. Given conflicting
6322
# choices, we go for a static library, that is the most portable,
6323
# since we can't tell whether shared libraries were disabled because
6324
# the user asked for that or because the platform doesn't support
6325
# them. This is particularly important on AIX, because we don't
6326
# support having both static and shared libraries enabled at the same
6327
# time on that platform, so we default to a shared-only configuration.
6328
# If a disable-shared tag is given, we'll fallback to a static-only
6329
# configuration. But we'll never go from static-only to shared-only.
6331
# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
6332
build_libtool_libs=no
6334
# ### END LIBTOOL TAG CONFIG: disable-shared
6336
# ### BEGIN LIBTOOL TAG CONFIG: disable-static
6337
build_old_libs=`case $build_libtool_libs in yes) $echo no;; *) $echo yes;; esac`
6338
# ### END LIBTOOL TAG CONFIG: disable-static