/* This file, putcolj.c, contains routines that write data elements to */ /* a FITS image or table, with long datatype. */ /* The FITSIO software was written by William Pence at the High Energy */ /* Astrophysic Science Archive Research Center (HEASARC) at the NASA */ /* Goddard Space Flight Center. */ #include #include #include #include "fitsio2.h" /*--------------------------------------------------------------------------*/ int ffpprj( fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG firstelem, /* I - first vector element to write(1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ long *array, /* I - array of values that are written */ int *status) /* IO - error status */ /* Write an array of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long row; long nullvalue; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ fits_write_compressed_pixels(fptr, TLONG, firstelem, nelem, 0, array, &nullvalue, status); return(*status); } row=maxvalue(1,group); ffpclj(fptr, 2, row, firstelem, nelem, array, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffppnj( fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG firstelem, /* I - first vector element to write(1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ long *array, /* I - array of values that are written */ long nulval, /* I - undefined pixel value */ int *status) /* IO - error status */ /* Write an array of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). Any array values that are equal to the value of nulval will be replaced with the null pixel value that is appropriate for this column. */ { long row; long nullvalue; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ nullvalue = nulval; /* set local variable */ fits_write_compressed_pixels(fptr, TLONG, firstelem, nelem, 1, array, &nullvalue, status); return(*status); } row=maxvalue(1,group); ffpcnj(fptr, 2, row, firstelem, nelem, array, nulval, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffp2dj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG ncols, /* I - number of pixels in each row of array */ LONGLONG naxis1, /* I - FITS image NAXIS1 value */ LONGLONG naxis2, /* I - FITS image NAXIS2 value */ long *array, /* I - array to be written */ int *status) /* IO - error status */ /* Write an entire 2-D array of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { /* call the 3D writing routine, with the 3rd dimension = 1 */ ffp3dj(fptr, group, ncols, naxis2, naxis1, naxis2, 1, array, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffp3dj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG ncols, /* I - number of pixels in each row of array */ LONGLONG nrows, /* I - number of rows in each plane of array */ LONGLONG naxis1, /* I - FITS image NAXIS1 value */ LONGLONG naxis2, /* I - FITS image NAXIS2 value */ LONGLONG naxis3, /* I - FITS image NAXIS3 value */ long *array, /* I - array to be written */ int *status) /* IO - error status */ /* Write an entire 3-D cube of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long tablerow, ii, jj; long fpixel[3]= {1,1,1}, lpixel[3]; LONGLONG nfits, narray; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ lpixel[0] = (long) ncols; lpixel[1] = (long) nrows; lpixel[2] = (long) naxis3; fits_write_compressed_img(fptr, TLONG, fpixel, lpixel, 0, array, NULL, status); return(*status); } tablerow=maxvalue(1,group); if (ncols == naxis1 && nrows == naxis2) /* arrays have same size? */ { /* all the image pixels are contiguous, so write all at once */ ffpclj(fptr, 2, tablerow, 1L, naxis1 * naxis2 * naxis3, array, status); return(*status); } if (ncols < naxis1 || nrows < naxis2) return(*status = BAD_DIMEN); nfits = 1; /* next pixel in FITS image to write to */ narray = 0; /* next pixel in input array to be written */ /* loop over naxis3 planes in the data cube */ for (jj = 0; jj < naxis3; jj++) { /* loop over the naxis2 rows in the FITS image, */ /* writing naxis1 pixels to each row */ for (ii = 0; ii < naxis2; ii++) { if (ffpclj(fptr, 2, tablerow, nfits, naxis1,&array[narray],status) > 0) return(*status); nfits += naxis1; narray += ncols; } narray += (nrows - naxis2) * ncols; } return(*status); } /*--------------------------------------------------------------------------*/ int ffpssj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ long naxis, /* I - number of data axes in array */ long *naxes, /* I - size of each FITS axis */ long *fpixel, /* I - 1st pixel in each axis to write (1=1st) */ long *lpixel, /* I - last pixel in each axis to write */ long *array, /* I - array to be written */ int *status) /* IO - error status */ /* Write a subsection of pixels to the primary array or image. A subsection is defined to be any contiguous rectangular array of pixels within the n-dimensional FITS data file. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long tablerow; LONGLONG fpix[7], dimen[7], astart, pstart; LONGLONG off2, off3, off4, off5, off6, off7; LONGLONG st10, st20, st30, st40, st50, st60, st70; LONGLONG st1, st2, st3, st4, st5, st6, st7; long ii, i1, i2, i3, i4, i5, i6, i7, irange[7]; if (*status > 0) return(*status); if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ fits_write_compressed_img(fptr, TLONG, fpixel, lpixel, 0, array, NULL, status); return(*status); } if (naxis < 1 || naxis > 7) return(*status = BAD_DIMEN); tablerow=maxvalue(1,group); /* calculate the size and number of loops to perform in each dimension */ for (ii = 0; ii < 7; ii++) { fpix[ii]=1; irange[ii]=1; dimen[ii]=1; } for (ii = 0; ii < naxis; ii++) { fpix[ii]=fpixel[ii]; irange[ii]=lpixel[ii]-fpixel[ii]+1; dimen[ii]=naxes[ii]; } i1=irange[0]; /* compute the pixel offset between each dimension */ off2 = dimen[0]; off3 = off2 * dimen[1]; off4 = off3 * dimen[2]; off5 = off4 * dimen[3]; off6 = off5 * dimen[4]; off7 = off6 * dimen[5]; st10 = fpix[0]; st20 = (fpix[1] - 1) * off2; st30 = (fpix[2] - 1) * off3; st40 = (fpix[3] - 1) * off4; st50 = (fpix[4] - 1) * off5; st60 = (fpix[5] - 1) * off6; st70 = (fpix[6] - 1) * off7; /* store the initial offset in each dimension */ st1 = st10; st2 = st20; st3 = st30; st4 = st40; st5 = st50; st6 = st60; st7 = st70; astart = 0; for (i7 = 0; i7 < irange[6]; i7++) { for (i6 = 0; i6 < irange[5]; i6++) { for (i5 = 0; i5 < irange[4]; i5++) { for (i4 = 0; i4 < irange[3]; i4++) { for (i3 = 0; i3 < irange[2]; i3++) { pstart = st1 + st2 + st3 + st4 + st5 + st6 + st7; for (i2 = 0; i2 < irange[1]; i2++) { if (ffpclj(fptr, 2, tablerow, pstart, i1, &array[astart], status) > 0) return(*status); astart += i1; pstart += off2; } st2 = st20; st3 = st3+off3; } st3 = st30; st4 = st4+off4; } st4 = st40; st5 = st5+off5; } st5 = st50; st6 = st6+off6; } st6 = st60; st7 = st7+off7; } return(*status); } /*--------------------------------------------------------------------------*/ int ffpgpj( fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ long firstelem, /* I - first vector element to write(1 = 1st) */ long nelem, /* I - number of values to write */ long *array, /* I - array of values that are written */ int *status) /* IO - error status */ /* Write an array of group parameters to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long row; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ row=maxvalue(1,group); ffpclj(fptr, 1L, row, firstelem, nelem, array, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffpclj( fitsfile *fptr, /* I - FITS file pointer */ int colnum, /* I - number of column to write (1 = 1st col) */ LONGLONG firstrow, /* I - first row to write (1 = 1st row) */ LONGLONG firstelem, /* I - first vector element to write (1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ long *array, /* I - array of values to write */ int *status) /* IO - error status */ /* Write an array of values to a column in the current FITS HDU. The column number may refer to a real column in an ASCII or binary table, or it may refer to a virtual column in a 1 or more grouped FITS primary array. FITSIO treats a primary array as a binary table with 2 vector columns: the first column contains the group parameters (often with length = 0) and the second column contains the array of image pixels. Each row of the table represents a group in the case of multigroup FITS images. The input array of values will be converted to the datatype of the column and will be inverse-scaled by the FITS TSCALn and TZEROn values if necessary. */ { int tcode, maxelem, hdutype, writeraw; long twidth, incre; long ntodo; LONGLONG repeat, startpos, elemnum, wrtptr, rowlen, rownum, remain, next, tnull; double scale, zero; char tform[20], cform[20]; char message[FLEN_ERRMSG]; char snull[20]; /* the FITS null value */ double cbuff[DBUFFSIZE / sizeof(double)]; /* align cbuff on word boundary */ void *buffer; if (*status > 0) /* inherit input status value if > 0 */ return(*status); buffer = cbuff; /*---------------------------------------------------*/ /* Check input and get parameters about the column: */ /*---------------------------------------------------*/ if (ffgcprll( fptr, colnum, firstrow, firstelem, nelem, 1, &scale, &zero, tform, &twidth, &tcode, &maxelem, &startpos, &elemnum, &incre, &repeat, &rowlen, &hdutype, &tnull, snull, status) > 0) return(*status); if (tcode == TSTRING) ffcfmt(tform, cform); /* derive C format for writing strings */ /* if there is no scaling and the native machine format is not byteswapped then we can simply write the raw data bytes into the FITS file if the datatype of the FITS column is the same as the input values. Otherwise we must convert the raw values into the scaled and/or machine dependent format in a temporary buffer that has been allocated for this purpose. */ if (scale == 1. && zero == 0. && MACHINE == NATIVE && tcode == TLONG && LONGSIZE == 32) { writeraw = 1; maxelem = (int) nelem; /* we can write the entire array at one time */ } else writeraw = 0; /*---------------------------------------------------------------------*/ /* Now write the pixels to the FITS column. */ /* First call the ffXXfYY routine to (1) convert the datatype */ /* if necessary, and (2) scale the values by the FITS TSCALn and */ /* TZEROn linear scaling parameters into a temporary buffer. */ /*---------------------------------------------------------------------*/ remain = nelem; /* remaining number of values to write */ next = 0; /* next element in array to be written */ rownum = 0; /* row number, relative to firstrow */ while (remain) { /* limit the number of pixels to process a one time to the number that will fit in the buffer space or to the number of pixels that remain in the current vector, which ever is smaller. */ ntodo = (long) minvalue(remain, maxelem); ntodo = (long) minvalue(ntodo, (repeat - elemnum)); wrtptr = startpos + ((LONGLONG)rownum * rowlen) + (elemnum * incre); ffmbyt(fptr, wrtptr, IGNORE_EOF, status); /* move to write position */ switch (tcode) { case (TLONG): if (writeraw) { /* write raw input bytes without conversion */ ffpi4b(fptr, ntodo, incre, (INT32BIT *) &array[next], status); } else { /* convert the raw data before writing to FITS file */ ffi4fi4(&array[next], ntodo, scale, zero, (INT32BIT *) buffer, status); ffpi4b(fptr, ntodo, incre, (INT32BIT *) buffer, status); } break; case (TLONGLONG): fflongfi8(&array[next], ntodo, scale, zero, (LONGLONG *) buffer, status); ffpi8b(fptr, ntodo, incre, (long *) buffer, status); break; case (TBYTE): ffi4fi1(&array[next], ntodo, scale, zero, (unsigned char *) buffer, status); ffpi1b(fptr, ntodo, incre, (unsigned char *) buffer, status); break; case (TSHORT): ffi4fi2(&array[next], ntodo, scale, zero, (short *) buffer, status); ffpi2b(fptr, ntodo, incre, (short *) buffer, status); break; case (TFLOAT): ffi4fr4(&array[next], ntodo, scale, zero, (float *) buffer, status); ffpr4b(fptr, ntodo, incre, (float *) buffer, status); break; case (TDOUBLE): ffi4fr8(&array[next], ntodo, scale, zero, (double *) buffer, status); ffpr8b(fptr, ntodo, incre, (double *) buffer, status); break; case (TSTRING): /* numerical column in an ASCII table */ if (cform[1] != 's') /* "%s" format is a string */ { ffi4fstr(&array[next], ntodo, scale, zero, cform, twidth, (char *) buffer, status); if (incre == twidth) /* contiguous bytes */ ffpbyt(fptr, ntodo * twidth, buffer, status); else ffpbytoff(fptr, twidth, ntodo, incre - twidth, buffer, status); break; } /* can't write to string column, so fall thru to default: */ default: /* error trap */ sprintf(message, "Cannot write numbers to column %d which has format %s", colnum,tform); ffpmsg(message); if (hdutype == ASCII_TBL) return(*status = BAD_ATABLE_FORMAT); else return(*status = BAD_BTABLE_FORMAT); } /* End of switch block */ /*-------------------------*/ /* Check for fatal error */ /*-------------------------*/ if (*status > 0) /* test for error during previous write operation */ { sprintf(message, "Error writing elements %.0f thru %.0f of input data array (ffpclj).", (double) (next+1), (double) (next+ntodo)); ffpmsg(message); return(*status); } /*--------------------------------------------*/ /* increment the counters for the next loop */ /*--------------------------------------------*/ remain -= ntodo; if (remain) { next += ntodo; elemnum += ntodo; if (elemnum == repeat) /* completed a row; start on next row */ { elemnum = 0; rownum++; } } } /* End of main while Loop */ /*--------------------------------*/ /* check for numerical overflow */ /*--------------------------------*/ if (*status == OVERFLOW_ERR) { ffpmsg( "Numerical overflow during type conversion while writing FITS data."); *status = NUM_OVERFLOW; } return(*status); } /*--------------------------------------------------------------------------*/ int ffpcnj( fitsfile *fptr, /* I - FITS file pointer */ int colnum, /* I - number of column to write (1 = 1st col) */ LONGLONG firstrow, /* I - first row to write (1 = 1st row) */ LONGLONG firstelem, /* I - first vector element to write (1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ long *array, /* I - array of values to write */ long nulvalue, /* I - value used to flag undefined pixels */ int *status) /* IO - error status */ /* Write an array of elements to the specified column of a table. Any input pixels equal to the value of nulvalue will be replaced by the appropriate null value in the output FITS file. The input array of values will be converted to the datatype of the column and will be inverse-scaled by the FITS TSCALn and TZEROn values if necessary */ { tcolumn *colptr; long ngood = 0, nbad = 0, ii; LONGLONG repeat, first, fstelm, fstrow; int tcode, overflow = 0; if (*status > 0) return(*status); /* reset position to the correct HDU if necessary */ if (fptr->HDUposition != (fptr->Fptr)->curhdu) { ffmahd(fptr, (fptr->HDUposition) + 1, NULL, status); } else if ((fptr->Fptr)->datastart == DATA_UNDEFINED) { if ( ffrdef(fptr, status) > 0) /* rescan header */ return(*status); } colptr = (fptr->Fptr)->tableptr; /* point to first column */ colptr += (colnum - 1); /* offset to correct column structure */ tcode = colptr->tdatatype; if (tcode > 0) repeat = colptr->trepeat; /* repeat count for this column */ else repeat = firstelem -1 + nelem; /* variable length arrays */ /* if variable length array, first write the whole input vector, then go back and fill in the nulls */ if (tcode < 0) { if (ffpclj(fptr, colnum, firstrow, firstelem, nelem, array, status) > 0) { if (*status == NUM_OVERFLOW) { /* ignore overflows, which are possibly the null pixel values */ /* overflow = 1; */ *status = 0; } else { return(*status); } } } /* absolute element number in the column */ first = (firstrow - 1) * repeat + firstelem; for (ii = 0; ii < nelem; ii++) { if (array[ii] != nulvalue) /* is this a good pixel? */ { if (nbad) /* write previous string of bad pixels */ { fstelm = ii - nbad + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ if (ffpclu(fptr, colnum, fstrow, fstelm, nbad, status) > 0) return(*status); nbad=0; } ngood = ngood + 1; /* the consecutive number of good pixels */ } else { if (ngood) /* write previous string of good pixels */ { fstelm = ii - ngood + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ if (tcode > 0) { /* variable length arrays have already been written */ if (ffpclj(fptr, colnum, fstrow, fstelm, ngood, &array[ii-ngood], status) > 0) { if (*status == NUM_OVERFLOW) { overflow = 1; *status = 0; } else { return(*status); } } } ngood=0; } nbad = nbad +1; /* the consecutive number of bad pixels */ } } /* finished loop; now just write the last set of pixels */ if (ngood) /* write last string of good pixels */ { fstelm = ii - ngood + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ if (tcode > 0) { /* variable length arrays have already been written */ ffpclj(fptr, colnum, fstrow, fstelm, ngood, &array[ii-ngood], status); } } else if (nbad) /* write last string of bad pixels */ { fstelm = ii - nbad + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ ffpclu(fptr, colnum, fstrow, fstelm, nbad, status); } if (*status <= 0) { if (overflow) { *status = NUM_OVERFLOW; } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi4fi1(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ unsigned char *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { if (input[ii] < 0) { *status = OVERFLOW_ERR; output[ii] = 0; } else if (input[ii] > UCHAR_MAX) { *status = OVERFLOW_ERR; output[ii] = UCHAR_MAX; } else output[ii] = (unsigned char) input[ii]; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DUCHAR_MIN) { *status = OVERFLOW_ERR; output[ii] = 0; } else if (dvalue > DUCHAR_MAX) { *status = OVERFLOW_ERR; output[ii] = UCHAR_MAX; } else output[ii] = (unsigned char) (dvalue + .5); } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi4fi2(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ short *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { if (input[ii] < SHRT_MIN) { *status = OVERFLOW_ERR; output[ii] = SHRT_MIN; } else if (input[ii] > SHRT_MAX) { *status = OVERFLOW_ERR; output[ii] = SHRT_MAX; } else output[ii] = (short) input[ii]; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DSHRT_MIN) { *status = OVERFLOW_ERR; output[ii] = SHRT_MIN; } else if (dvalue > DSHRT_MAX) { *status = OVERFLOW_ERR; output[ii] = SHRT_MAX; } else { if (dvalue >= 0) output[ii] = (short) (dvalue + .5); else output[ii] = (short) (dvalue - .5); } } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi4fi4(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ INT32BIT *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = (INT32BIT) input[ii]; } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DINT_MIN) { *status = OVERFLOW_ERR; output[ii] = INT32_MIN; } else if (dvalue > DINT_MAX) { *status = OVERFLOW_ERR; output[ii] = INT32_MAX; } else { if (dvalue >= 0) output[ii] = (INT32BIT) (dvalue + .5); else output[ii] = (INT32BIT) (dvalue - .5); } } } return(*status); } /*--------------------------------------------------------------------------*/ int fflongfi8(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ LONGLONG *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = input[ii]; } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DLONGLONG_MIN) { *status = OVERFLOW_ERR; output[ii] = LONGLONG_MIN; } else if (dvalue > DLONGLONG_MAX) { *status = OVERFLOW_ERR; output[ii] = LONGLONG_MAX; } else { if (dvalue >= 0) output[ii] = (LONGLONG) (dvalue + .5); else output[ii] = (LONGLONG) (dvalue - .5); } } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi4fr4(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ float *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = (float) input[ii]; } else { for (ii = 0; ii < ntodo; ii++) output[ii] = (float) ((input[ii] - zero) / scale); } return(*status); } /*--------------------------------------------------------------------------*/ int ffi4fr8(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ double *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = (double) input[ii]; } else { for (ii = 0; ii < ntodo; ii++) output[ii] = (input[ii] - zero) / scale; } return(*status); } /*--------------------------------------------------------------------------*/ int ffi4fstr(long *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ char *cform, /* I - format for output string values */ long twidth, /* I - width of each field, in chars */ char *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do scaling if required. */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { sprintf(output, cform, (double) input[ii]); output += twidth; if (*output) /* if this char != \0, then overflow occurred */ *status = OVERFLOW_ERR; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; sprintf(output, cform, dvalue); output += twidth; if (*output) /* if this char != \0, then overflow occurred */ *status = OVERFLOW_ERR; } } return(*status); } /* ======================================================================== */ /* the following routines support the 'long long' data type */ /* ======================================================================== */ /*--------------------------------------------------------------------------*/ int ffpprjj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG firstelem, /* I - first vector element to write(1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ LONGLONG *array, /* I - array of values that are written */ int *status) /* IO - error status */ /* Write an array of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long row; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ ffpmsg("writing to compressed image is not supported"); return(*status = DATA_COMPRESSION_ERR); } row=maxvalue(1,group); ffpcljj(fptr, 2, row, firstelem, nelem, array, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffppnjj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG firstelem, /* I - first vector element to write(1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ LONGLONG *array, /* I - array of values that are written */ LONGLONG nulval, /* I - undefined pixel value */ int *status) /* IO - error status */ /* Write an array of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). Any array values that are equal to the value of nulval will be replaced with the null pixel value that is appropriate for this column. */ { long row; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ ffpmsg("writing to compressed image is not supported"); return(*status = DATA_COMPRESSION_ERR); } row=maxvalue(1,group); ffpcnjj(fptr, 2, row, firstelem, nelem, array, nulval, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffp2djj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG ncols, /* I - number of pixels in each row of array */ LONGLONG naxis1, /* I - FITS image NAXIS1 value */ LONGLONG naxis2, /* I - FITS image NAXIS2 value */ LONGLONG *array, /* I - array to be written */ int *status) /* IO - error status */ /* Write an entire 2-D array of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { /* call the 3D writing routine, with the 3rd dimension = 1 */ ffp3djj(fptr, group, ncols, naxis2, naxis1, naxis2, 1, array, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffp3djj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ LONGLONG ncols, /* I - number of pixels in each row of array */ LONGLONG nrows, /* I - number of rows in each plane of array */ LONGLONG naxis1, /* I - FITS image NAXIS1 value */ LONGLONG naxis2, /* I - FITS image NAXIS2 value */ LONGLONG naxis3, /* I - FITS image NAXIS3 value */ LONGLONG *array, /* I - array to be written */ int *status) /* IO - error status */ /* Write an entire 3-D cube of values to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long tablerow, ii, jj; LONGLONG nfits, narray; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ ffpmsg("writing to compressed image is not supported"); return(*status = DATA_COMPRESSION_ERR); } tablerow=maxvalue(1,group); if (ncols == naxis1 && nrows == naxis2) /* arrays have same size? */ { /* all the image pixels are contiguous, so write all at once */ ffpcljj(fptr, 2, tablerow, 1L, naxis1 * naxis2 * naxis3, array, status); return(*status); } if (ncols < naxis1 || nrows < naxis2) return(*status = BAD_DIMEN); nfits = 1; /* next pixel in FITS image to write to */ narray = 0; /* next pixel in input array to be written */ /* loop over naxis3 planes in the data cube */ for (jj = 0; jj < naxis3; jj++) { /* loop over the naxis2 rows in the FITS image, */ /* writing naxis1 pixels to each row */ for (ii = 0; ii < naxis2; ii++) { if (ffpcljj(fptr, 2, tablerow, nfits, naxis1,&array[narray],status) > 0) return(*status); nfits += naxis1; narray += ncols; } narray += (nrows - naxis2) * ncols; } return(*status); } /*--------------------------------------------------------------------------*/ int ffpssjj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ long naxis, /* I - number of data axes in array */ long *naxes, /* I - size of each FITS axis */ long *fpixel, /* I - 1st pixel in each axis to write (1=1st) */ long *lpixel, /* I - last pixel in each axis to write */ LONGLONG *array, /* I - array to be written */ int *status) /* IO - error status */ /* Write a subsection of pixels to the primary array or image. A subsection is defined to be any contiguous rectangular array of pixels within the n-dimensional FITS data file. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long tablerow; LONGLONG fpix[7], dimen[7], astart, pstart; LONGLONG off2, off3, off4, off5, off6, off7; LONGLONG st10, st20, st30, st40, st50, st60, st70; LONGLONG st1, st2, st3, st4, st5, st6, st7; long ii, i1, i2, i3, i4, i5, i6, i7, irange[7]; if (*status > 0) return(*status); if (fits_is_compressed_image(fptr, status)) { /* this is a compressed image in a binary table */ ffpmsg("writing to compressed image is not supported"); return(*status = DATA_COMPRESSION_ERR); } if (naxis < 1 || naxis > 7) return(*status = BAD_DIMEN); tablerow=maxvalue(1,group); /* calculate the size and number of loops to perform in each dimension */ for (ii = 0; ii < 7; ii++) { fpix[ii]=1; irange[ii]=1; dimen[ii]=1; } for (ii = 0; ii < naxis; ii++) { fpix[ii]=fpixel[ii]; irange[ii]=lpixel[ii]-fpixel[ii]+1; dimen[ii]=naxes[ii]; } i1=irange[0]; /* compute the pixel offset between each dimension */ off2 = dimen[0]; off3 = off2 * dimen[1]; off4 = off3 * dimen[2]; off5 = off4 * dimen[3]; off6 = off5 * dimen[4]; off7 = off6 * dimen[5]; st10 = fpix[0]; st20 = (fpix[1] - 1) * off2; st30 = (fpix[2] - 1) * off3; st40 = (fpix[3] - 1) * off4; st50 = (fpix[4] - 1) * off5; st60 = (fpix[5] - 1) * off6; st70 = (fpix[6] - 1) * off7; /* store the initial offset in each dimension */ st1 = st10; st2 = st20; st3 = st30; st4 = st40; st5 = st50; st6 = st60; st7 = st70; astart = 0; for (i7 = 0; i7 < irange[6]; i7++) { for (i6 = 0; i6 < irange[5]; i6++) { for (i5 = 0; i5 < irange[4]; i5++) { for (i4 = 0; i4 < irange[3]; i4++) { for (i3 = 0; i3 < irange[2]; i3++) { pstart = st1 + st2 + st3 + st4 + st5 + st6 + st7; for (i2 = 0; i2 < irange[1]; i2++) { if (ffpcljj(fptr, 2, tablerow, pstart, i1, &array[astart], status) > 0) return(*status); astart += i1; pstart += off2; } st2 = st20; st3 = st3+off3; } st3 = st30; st4 = st4+off4; } st4 = st40; st5 = st5+off5; } st5 = st50; st6 = st6+off6; } st6 = st60; st7 = st7+off7; } return(*status); } /*--------------------------------------------------------------------------*/ int ffpgpjj(fitsfile *fptr, /* I - FITS file pointer */ long group, /* I - group to write(1 = 1st group) */ long firstelem, /* I - first vector element to write(1 = 1st) */ long nelem, /* I - number of values to write */ LONGLONG *array, /* I - array of values that are written */ int *status) /* IO - error status */ /* Write an array of group parameters to the primary array. Data conversion and scaling will be performed if necessary (e.g, if the datatype of the FITS array is not the same as the array being written). */ { long row; /* the primary array is represented as a binary table: each group of the primary array is a row in the table, where the first column contains the group parameters and the second column contains the image itself. */ row=maxvalue(1,group); ffpcljj(fptr, 1L, row, firstelem, nelem, array, status); return(*status); } /*--------------------------------------------------------------------------*/ int ffpcljj(fitsfile *fptr, /* I - FITS file pointer */ int colnum, /* I - number of column to write (1 = 1st col) */ LONGLONG firstrow, /* I - first row to write (1 = 1st row) */ LONGLONG firstelem, /* I - first vector element to write (1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ LONGLONG *array, /* I - array of values to write */ int *status) /* IO - error status */ /* Write an array of values to a column in the current FITS HDU. The column number may refer to a real column in an ASCII or binary table, or it may refer to a virtual column in a 1 or more grouped FITS primary array. FITSIO treats a primary array as a binary table with 2 vector columns: the first column contains the group parameters (often with length = 0) and the second column contains the array of image pixels. Each row of the table represents a group in the case of multigroup FITS images. The input array of values will be converted to the datatype of the column and will be inverse-scaled by the FITS TSCALn and TZEROn values if necessary. */ { int tcode, maxelem, hdutype, writeraw; long twidth, incre; long ntodo; LONGLONG repeat, startpos, elemnum, wrtptr, rowlen, rownum, remain, next, tnull; double scale, zero; char tform[20], cform[20]; char message[FLEN_ERRMSG]; char snull[20]; /* the FITS null value */ double cbuff[DBUFFSIZE / sizeof(double)]; /* align cbuff on word boundary */ void *buffer; if (*status > 0) /* inherit input status value if > 0 */ return(*status); buffer = cbuff; /*---------------------------------------------------*/ /* Check input and get parameters about the column: */ /*---------------------------------------------------*/ if (ffgcprll( fptr, colnum, firstrow, firstelem, nelem, 1, &scale, &zero, tform, &twidth, &tcode, &maxelem, &startpos, &elemnum, &incre, &repeat, &rowlen, &hdutype, &tnull, snull, status) > 0) return(*status); if (tcode == TSTRING) ffcfmt(tform, cform); /* derive C format for writing strings */ /* if there is no scaling and the native machine format is not byteswapped then we can simply write the raw data bytes into the FITS file if the datatype of the FITS column is the same as the input values. Otherwise we must convert the raw values into the scaled and/or machine dependent format in a temporary buffer that has been allocated for this purpose. */ if (scale == 1. && zero == 0. && MACHINE == NATIVE && tcode == TLONGLONG) { writeraw = 1; maxelem = (int) nelem; /* we can write the entire array at one time */ } else writeraw = 0; /*---------------------------------------------------------------------*/ /* Now write the pixels to the FITS column. */ /* First call the ffXXfYY routine to (1) convert the datatype */ /* if necessary, and (2) scale the values by the FITS TSCALn and */ /* TZEROn linear scaling parameters into a temporary buffer. */ /*---------------------------------------------------------------------*/ remain = nelem; /* remaining number of values to write */ next = 0; /* next element in array to be written */ rownum = 0; /* row number, relative to firstrow */ while (remain) { /* limit the number of pixels to process a one time to the number that will fit in the buffer space or to the number of pixels that remain in the current vector, which ever is smaller. */ ntodo = (long) minvalue(remain, maxelem); ntodo = (long) minvalue(ntodo, (repeat - elemnum)); wrtptr = startpos + ((LONGLONG)rownum * rowlen) + (elemnum * incre); ffmbyt(fptr, wrtptr, IGNORE_EOF, status); /* move to write position */ switch (tcode) { case (TLONGLONG): if (writeraw) { /* write raw input bytes without conversion */ ffpi8b(fptr, ntodo, incre, (long *) &array[next], status); } else { /* convert the raw data before writing to FITS file */ ffi8fi8(&array[next], ntodo, scale, zero, (LONGLONG *) buffer, status); ffpi8b(fptr, ntodo, incre, (long *) buffer, status); } break; case (TLONG): ffi8fi4(&array[next], ntodo, scale, zero, (INT32BIT *) buffer, status); ffpi4b(fptr, ntodo, incre, (INT32BIT *) buffer, status); break; case (TBYTE): ffi8fi1(&array[next], ntodo, scale, zero, (unsigned char *) buffer, status); ffpi1b(fptr, ntodo, incre, (unsigned char *) buffer, status); break; case (TSHORT): ffi8fi2(&array[next], ntodo, scale, zero, (short *) buffer, status); ffpi2b(fptr, ntodo, incre, (short *) buffer, status); break; case (TFLOAT): ffi8fr4(&array[next], ntodo, scale, zero, (float *) buffer, status); ffpr4b(fptr, ntodo, incre, (float *) buffer, status); break; case (TDOUBLE): ffi8fr8(&array[next], ntodo, scale, zero, (double *) buffer, status); ffpr8b(fptr, ntodo, incre, (double *) buffer, status); break; case (TSTRING): /* numerical column in an ASCII table */ if (cform[1] != 's') /* "%s" format is a string */ { ffi8fstr(&array[next], ntodo, scale, zero, cform, twidth, (char *) buffer, status); if (incre == twidth) /* contiguous bytes */ ffpbyt(fptr, ntodo * twidth, buffer, status); else ffpbytoff(fptr, twidth, ntodo, incre - twidth, buffer, status); break; } /* can't write to string column, so fall thru to default: */ default: /* error trap */ sprintf(message, "Cannot write numbers to column %d which has format %s", colnum,tform); ffpmsg(message); if (hdutype == ASCII_TBL) return(*status = BAD_ATABLE_FORMAT); else return(*status = BAD_BTABLE_FORMAT); } /* End of switch block */ /*-------------------------*/ /* Check for fatal error */ /*-------------------------*/ if (*status > 0) /* test for error during previous write operation */ { sprintf(message, "Error writing elements %.0f thru %.0f of input data array (ffpclj).", (double) (next+1), (double) (next+ntodo)); ffpmsg(message); return(*status); } /*--------------------------------------------*/ /* increment the counters for the next loop */ /*--------------------------------------------*/ remain -= ntodo; if (remain) { next += ntodo; elemnum += ntodo; if (elemnum == repeat) /* completed a row; start on next row */ { elemnum = 0; rownum++; } } } /* End of main while Loop */ /*--------------------------------*/ /* check for numerical overflow */ /*--------------------------------*/ if (*status == OVERFLOW_ERR) { ffpmsg( "Numerical overflow during type conversion while writing FITS data."); *status = NUM_OVERFLOW; } return(*status); } /*--------------------------------------------------------------------------*/ int ffpcnjj(fitsfile *fptr, /* I - FITS file pointer */ int colnum, /* I - number of column to write (1 = 1st col) */ LONGLONG firstrow, /* I - first row to write (1 = 1st row) */ LONGLONG firstelem, /* I - first vector element to write (1 = 1st) */ LONGLONG nelem, /* I - number of values to write */ LONGLONG *array, /* I - array of values to write */ LONGLONG nulvalue, /* I - value used to flag undefined pixels */ int *status) /* IO - error status */ /* Write an array of elements to the specified column of a table. Any input pixels equal to the value of nulvalue will be replaced by the appropriate null value in the output FITS file. The input array of values will be converted to the datatype of the column and will be inverse-scaled by the FITS TSCALn and TZEROn values if necessary */ { tcolumn *colptr; long ngood = 0, nbad = 0, ii; LONGLONG repeat, first, fstelm, fstrow; int tcode, overflow = 0; if (*status > 0) return(*status); /* reset position to the correct HDU if necessary */ if (fptr->HDUposition != (fptr->Fptr)->curhdu) { ffmahd(fptr, (fptr->HDUposition) + 1, NULL, status); } else if ((fptr->Fptr)->datastart == DATA_UNDEFINED) { if ( ffrdef(fptr, status) > 0) /* rescan header */ return(*status); } colptr = (fptr->Fptr)->tableptr; /* point to first column */ colptr += (colnum - 1); /* offset to correct column structure */ tcode = colptr->tdatatype; if (tcode > 0) repeat = colptr->trepeat; /* repeat count for this column */ else repeat = firstelem -1 + nelem; /* variable length arrays */ /* if variable length array, first write the whole input vector, then go back and fill in the nulls */ if (tcode < 0) { if (ffpcljj(fptr, colnum, firstrow, firstelem, nelem, array, status) > 0) { if (*status == NUM_OVERFLOW) { /* ignore overflows, which are possibly the null pixel values */ /* overflow = 1; */ *status = 0; } else { return(*status); } } } /* absolute element number in the column */ first = (firstrow - 1) * repeat + firstelem; for (ii = 0; ii < nelem; ii++) { if (array[ii] != nulvalue) /* is this a good pixel? */ { if (nbad) /* write previous string of bad pixels */ { fstelm = ii - nbad + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ if (ffpclu(fptr, colnum, fstrow, fstelm, nbad, status) > 0) return(*status); nbad=0; } ngood = ngood +1; /* the consecutive number of good pixels */ } else { if (ngood) /* write previous string of good pixels */ { fstelm = ii - ngood + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ if (tcode > 0) { /* variable length arrays have already been written */ if (ffpcljj(fptr, colnum, fstrow, fstelm, ngood, &array[ii-ngood], status) > 0) { if (*status == NUM_OVERFLOW) { overflow = 1; *status = 0; } else { return(*status); } } } ngood=0; } nbad = nbad +1; /* the consecutive number of bad pixels */ } } /* finished loop; now just write the last set of pixels */ if (ngood) /* write last string of good pixels */ { fstelm = ii - ngood + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ if (tcode > 0) { /* variable length arrays have already been written */ ffpcljj(fptr, colnum, fstrow, fstelm, ngood, &array[ii-ngood], status); } } else if (nbad) /* write last string of bad pixels */ { fstelm = ii - nbad + first; /* absolute element number */ fstrow = (fstelm - 1) / repeat + 1; /* starting row number */ fstelm = fstelm - (fstrow - 1) * repeat; /* relative number */ ffpclu(fptr, colnum, fstrow, fstelm, nbad, status); } if (*status <= 0) { if (overflow) { *status = NUM_OVERFLOW; } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fi1(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ unsigned char *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { if (input[ii] < 0) { *status = OVERFLOW_ERR; output[ii] = 0; } else if (input[ii] > UCHAR_MAX) { *status = OVERFLOW_ERR; output[ii] = UCHAR_MAX; } else output[ii] = (unsigned char) input[ii]; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DUCHAR_MIN) { *status = OVERFLOW_ERR; output[ii] = 0; } else if (dvalue > DUCHAR_MAX) { *status = OVERFLOW_ERR; output[ii] = UCHAR_MAX; } else output[ii] = (unsigned char) (dvalue + .5); } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fi2(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ short *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { if (input[ii] < SHRT_MIN) { *status = OVERFLOW_ERR; output[ii] = SHRT_MIN; } else if (input[ii] > SHRT_MAX) { *status = OVERFLOW_ERR; output[ii] = SHRT_MAX; } else output[ii] = (short) input[ii]; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DSHRT_MIN) { *status = OVERFLOW_ERR; output[ii] = SHRT_MIN; } else if (dvalue > DSHRT_MAX) { *status = OVERFLOW_ERR; output[ii] = SHRT_MAX; } else { if (dvalue >= 0) output[ii] = (short) (dvalue + .5); else output[ii] = (short) (dvalue - .5); } } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fi4(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ INT32BIT *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { if (input[ii] < INT32_MIN) { *status = OVERFLOW_ERR; output[ii] = INT32_MIN; } else if (input[ii] > INT32_MAX) { *status = OVERFLOW_ERR; output[ii] = INT32_MAX; } else output[ii] = (INT32BIT) input[ii]; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DINT_MIN) { *status = OVERFLOW_ERR; output[ii] = INT32_MIN; } else if (dvalue > DINT_MAX) { *status = OVERFLOW_ERR; output[ii] = INT32_MAX; } else { if (dvalue >= 0) output[ii] = (INT32BIT) (dvalue + .5); else output[ii] = (INT32BIT) (dvalue - .5); } } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fi8(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ LONGLONG *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = input[ii]; } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; if (dvalue < DLONGLONG_MIN) { *status = OVERFLOW_ERR; output[ii] = LONGLONG_MIN; } else if (dvalue > DLONGLONG_MAX) { *status = OVERFLOW_ERR; output[ii] = LONGLONG_MAX; } else { if (dvalue >= 0) output[ii] = (LONGLONG) (dvalue + .5); else output[ii] = (LONGLONG) (dvalue - .5); } } } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fr4(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ float *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = (float) input[ii]; } else { for (ii = 0; ii < ntodo; ii++) output[ii] = (float) ((input[ii] - zero) / scale); } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fr8(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ double *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do datatype conversion and scaling if required. */ { long ii; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) output[ii] = (double) input[ii]; } else { for (ii = 0; ii < ntodo; ii++) output[ii] = (input[ii] - zero) / scale; } return(*status); } /*--------------------------------------------------------------------------*/ int ffi8fstr(LONGLONG *input, /* I - array of values to be converted */ long ntodo, /* I - number of elements in the array */ double scale, /* I - FITS TSCALn or BSCALE value */ double zero, /* I - FITS TZEROn or BZERO value */ char *cform, /* I - format for output string values */ long twidth, /* I - width of each field, in chars */ char *output, /* O - output array of converted values */ int *status) /* IO - error status */ /* Copy input to output prior to writing output to a FITS file. Do scaling if required. */ { long ii; double dvalue; if (scale == 1. && zero == 0.) { for (ii = 0; ii < ntodo; ii++) { sprintf(output, cform, (double) input[ii]); output += twidth; if (*output) /* if this char != \0, then overflow occurred */ *status = OVERFLOW_ERR; } } else { for (ii = 0; ii < ntodo; ii++) { dvalue = (input[ii] - zero) / scale; sprintf(output, cform, dvalue); output += twidth; if (*output) /* if this char != \0, then overflow occurred */ *status = OVERFLOW_ERR; } } return(*status); }