~ubuntu-branches/ubuntu/trusty/silo-llnl/trusty-proposed

# Makefile.in generated by automake 1.10 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (c) 1994 - 2010, Lawrence Livermore National Security, LLC.
# LLNL-CODE-425250.
# All rights reserved.
# 
# This file is part of Silo. For details, see silo.llnl.gov.
# 
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 
#    * Redistributions of source code must retain the above copyright
#      notice, this list of conditions and the disclaimer below.
#    * Redistributions in binary form must reproduce the above copyright
#      notice, this list of conditions and the disclaimer (as noted
#      below) in the documentation and/or other materials provided with
#      the distribution.
#    * Neither the name of the LLNS/LLNL nor the names of its
#      contributors may be used to endorse or promote products derived
#      from this software without specific prior written permission.
# 
# THIS SOFTWARE  IS PROVIDED BY  THE COPYRIGHT HOLDERS  AND CONTRIBUTORS
# "AS  IS" AND  ANY EXPRESS  OR IMPLIED  WARRANTIES, INCLUDING,  BUT NOT
# LIMITED TO, THE IMPLIED  WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A  PARTICULAR  PURPOSE ARE  DISCLAIMED.  IN  NO  EVENT SHALL  LAWRENCE
# LIVERMORE  NATIONAL SECURITY, LLC,  THE U.S.  DEPARTMENT OF  ENERGY OR
# CONTRIBUTORS BE LIABLE FOR  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR  CONSEQUENTIAL DAMAGES  (INCLUDING, BUT NOT  LIMITED TO,
# PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS  OF USE,  DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER  IN CONTRACT, STRICT LIABILITY,  OR TORT (INCLUDING
# NEGLIGENCE OR  OTHERWISE) ARISING IN  ANY WAY OUT  OF THE USE  OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# 
# This work was produced at Lawrence Livermore National Laboratory under
# Contract No.  DE-AC52-07NA27344 with the DOE.
# 
# Neither the  United States Government nor  Lawrence Livermore National
# Security, LLC nor any of  their employees, makes any warranty, express
# or  implied,  or  assumes  any  liability or  responsibility  for  the
# accuracy, completeness,  or usefulness of  any information, apparatus,
# product, or  process disclosed, or  represents that its use  would not
# infringe privately-owned rights.
# 
# Any reference herein to  any specific commercial products, process, or
# services by trade name,  trademark, manufacturer or otherwise does not
# necessarily  constitute or imply  its endorsement,  recommendation, or
# favoring  by  the  United  States  Government  or  Lawrence  Livermore
# National Security,  LLC. The views  and opinions of  authors expressed
# herein do not necessarily state  or reflect those of the United States
# Government or Lawrence Livermore National Security, LLC, and shall not
# be used for advertising or product endorsement purposes.
#


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
bin_PROGRAMS = silex$(EXEEXT)
subdir = tools/silex
DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
binPROGRAMS_INSTALL = $(INSTALL_PROGRAM)
PROGRAMS = $(bin_PROGRAMS)
am__objects_1 = Explorer.$(OBJEXT) SiloView.$(OBJEXT) \
	SiloDirView.$(OBJEXT) SiloDirTreeView.$(OBJEXT) \
	SiloArrayView.$(OBJEXT) SiloValueView.$(OBJEXT) \
	SiloObjectView.$(OBJEXT) SiloFile.$(OBJEXT) main.$(OBJEXT)
am_silex_OBJECTS = $(am__objects_1)
am__objects_2 = Explorer_moc.$(OBJEXT) SiloView_moc.$(OBJEXT) \
	SiloDirView_moc.$(OBJEXT) SiloDirTreeView_moc.$(OBJEXT) \
	SiloArrayView_moc.$(OBJEXT) SiloValueView_moc.$(OBJEXT) \
	SiloObjectView_moc.$(OBJEXT)
nodist_silex_OBJECTS = $(am__objects_2)
silex_OBJECTS = $(am_silex_OBJECTS) $(nodist_silex_OBJECTS)
am__DEPENDENCIES_1 =
@HDF5_DRV_NEEDED_FALSE@silex_DEPENDENCIES = ../../src/libsilo.la \
@HDF5_DRV_NEEDED_FALSE@	$(am__DEPENDENCIES_1) \
@HDF5_DRV_NEEDED_FALSE@	$(am__DEPENDENCIES_1)
@HDF5_DRV_NEEDED_TRUE@silex_DEPENDENCIES = ../../src/libsiloh5.la \
@HDF5_DRV_NEEDED_TRUE@	$(am__DEPENDENCIES_1) \
@HDF5_DRV_NEEDED_TRUE@	$(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I. -I$(top_builddir)@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/config/depcomp
am__depfiles_maybe = depfiles
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
LTCXXCOMPILE = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
CXXLINK = $(LIBTOOL) --tag=CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(silex_SOURCES) $(nodist_silex_SOURCES)
DIST_SOURCES = $(silex_SOURCES)
HEADERS = $(noinst_HEADERS)
ETAGS = etags
CTAGS = ctags
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BROWSER = @BROWSER@
BUNDLE_TARGET = @BUNDLE_TARGET@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CC_FULLPATH = @CC_FULLPATH@
CFLAGS = @CFLAGS@
CONFIG_CMD = @CONFIG_CMD@
CONFIG_DATE = @CONFIG_DATE@
CONFIG_USER = @CONFIG_USER@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CXX_FULLPATH = @CXX_FULLPATH@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
F77 = @F77@
FC = @FC@
FCFLAGS = @FCFLAGS@
FCLIBS = @FCLIBS@
FC_FULLPATH = @FC_FULLPATH@
FFLAGS = @FFLAGS@
FORTRAN = @FORTRAN@
FPZIP = @FPZIP@
GREP = @GREP@
HDF5_DRV = @HDF5_DRV@
HZIP = @HZIP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NETCDF = @NETCDF@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PDBP_DRV = @PDBP_DRV@
PDB_DRV = @PDB_DRV@
PRTDIAG = @PRTDIAG@
PYTHON = @PYTHON@
PYTHONMODULE = @PYTHONMODULE@
PYTHON_CPPFLAGS = @PYTHON_CPPFLAGS@
PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
PYTHON_PLATFORM = @PYTHON_PLATFORM@
PYTHON_PREFIX = @PYTHON_PREFIX@
PYTHON_VERSION = @PYTHON_VERSION@
QT_BIN = @QT_BIN@
QT_CORE = @QT_CORE@
QT_CORE_LIB = @QT_CORE_LIB@
QT_CXXFLAGS = @QT_CXXFLAGS@
QT_GUI = @QT_GUI@
QT_GUI_LIB = @QT_GUI_LIB@
QT_INCLUDE = @QT_INCLUDE@
QT_LDFLAGS = @QT_LDFLAGS@
QT_LIB = @QT_LIB@
QT_LIBS = @QT_LIBS@
QT_MOC = @QT_MOC@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SILEX = @SILEX@
SILO_DTYPPTR = @SILO_DTYPPTR@
SILO_DTYPPTR1 = @SILO_DTYPPTR1@
SILO_DTYPPTR2 = @SILO_DTYPPTR2@
SILO_VERS_MAJ = @SILO_VERS_MAJ@
SILO_VERS_MIN = @SILO_VERS_MIN@
SILO_VERS_PAT = @SILO_VERS_PAT@
SILO_VERS_PRE = @SILO_VERS_PRE@
SILO_VERS_TAG = @SILO_VERS_TAG@
STRIP = @STRIP@
TAURUS = @TAURUS@
VERSION = @VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_F77 = @ac_ct_F77@
ac_ct_FC = @ac_ct_FC@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
pkgpyexecdir = @pkgpyexecdir@
pkgpythondir = @pkgpythondir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
pyexecdir = @pyexecdir@
pythondir = @pythondir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
silex_SOURCES = $(FILES)
nodist_silex_SOURCES = $(FILES_MOC)
@HDF5_DRV_NEEDED_FALSE@silex_LDADD = ../../src/libsilo.la $(QT_LDFLAGS) $(QT_LIBS)
@HDF5_DRV_NEEDED_TRUE@silex_LDADD = ../../src/libsiloh5.la $(QT_LDFLAGS) $(QT_LIBS)
EXTRA_DIST = \
 array.xpm \
 curve.xpm \
 folder.xpm \
 mat.xpm \
 mesh.xpm \
 object.xpm \
 silovar.xpm \
 species.xpm \
 var.xpm

AM_CXXFLAGS = $(QT_CXXFLAGS)
AM_CPPFLAGS = \
 -I$(top_builddir)/src/silo \
 -I$(includedir)

noinst_HEADERS = \
 Explorer.h \
 SiloView.h \
 SiloDirView.h \
 SiloDirTreeView.h \
 SiloArrayView.h \
 SiloValueView.h \
 SiloObjectView.h \
 SiloFile.h 

FILES = \
 Explorer.cpp \
 SiloView.cpp \
 SiloDirView.cpp \
 SiloDirTreeView.cpp \
 SiloArrayView.cpp \
 SiloValueView.cpp \
 SiloObjectView.cpp \
 SiloFile.cpp \
 main.cpp 

FILES_MOC = \
 Explorer_moc.cpp \
 SiloView_moc.cpp \
 SiloDirView_moc.cpp \
 SiloDirTreeView_moc.cpp \
 SiloArrayView_moc.cpp \
 SiloValueView_moc.cpp \
 SiloObjectView_moc.cpp

BUILT_SOURCES = $(FILES_MOC)
CLEANFILES = $(FILES_MOC)
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
.SUFFIXES: .cpp .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  tools/silex/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  tools/silex/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  if test -f $$p \
	     || test -f $$p1 \
	  ; then \
	    f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \
	   echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \
	   $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \
	  echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \
	  rm -f "$(DESTDIR)$(bindir)/$$f"; \
	done

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
	  echo " rm -f $$p $$f"; \
	  rm -f $$p $$f ; \
	done
silex$(EXEEXT): $(silex_OBJECTS) $(silex_DEPENDENCIES) 
	@rm -f silex$(EXEEXT)
	$(CXXLINK) $(silex_OBJECTS) $(silex_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Explorer.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/Explorer_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloArrayView.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloArrayView_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloDirTreeView.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloDirTreeView_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloDirView.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloDirView_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloFile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloObjectView.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloObjectView_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloValueView.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloValueView_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloView.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/SiloView_moc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@

.cpp.o:
@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<

.cpp.obj:
@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cpp.lo:
@am__fastdepCXX_TRUE@	$(LTCXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCXX_TRUE@	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(PROGRAMS) $(HEADERS)
installdirs:
	for dir in "$(DESTDIR)$(bindir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-exec-am: install-binPROGRAMS
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-binPROGRAMS

.MAKE: install-am install-exec-am install-strip

.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
	clean-generic clean-libtool ctags distclean distclean-compile \
	distclean-generic distclean-libtool distclean-tags distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-binPROGRAMS install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-hook \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
	uninstall-am uninstall-binPROGRAMS


%_moc.cpp: %.h
	$(QT_MOC) -o $@ $<

install-exec-hook: $(BUNDLE_TARGET)

silex.app:
	@if test -e $@; then \
	  rm -f $@/Contents/{bin,lib}; \
	  rm -rf $@; \
	fi; \
	mkdir $@; \
	mkdir $@/Contents; \
	mkdir $@/Contents/MacOS; \
	mkdir $@/Contents/Resources; \
	{
	  echo '<?xml version="1.0" encoding="UTF-8"?>'; \
	  echo '<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">'; \
	  echo '<plist version="1.0">'; \
	  echo '<dict>'; \
	  echo '        <key>CFBundleName</key>'; \
	  echo '        <string>@PACKAGE_TARNAME@</string>'; \
	  echo '        <key>CFBundlePackageType</key>'; \
	  echo '        <string>APPL</string>'; \
	  echo '        <key>CFBundleGetInfoString</key>'; \
	  echo '        <string>Created by @CONFIG_USER@ on @CONFIG_DATE@</string>'; \
	  echo '        <key>CFBundleSignature</key>'; \
	  echo '        <string>SILX</string>'; \
	  echo '</dict>'; \
	  echo '</plist>'; \
	} > $@/Contents/Info.plist
	echo 'APPLSILX' > $@/Contents/PkgInfo

.PHONY: silex.app
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: