~ubuntu-branches/ubuntu/utopic/gridengine/utopic

#!/bin/sh
#
# Grid Engine CA framework script
#
#___INFO__MARK_BEGIN__
##########################################################################
#
#  The Contents of this file are made available subject to the terms of
#  the Sun Industry Standards Source License Version 1.2
#
#  Sun Microsystems Inc., March, 2001
#
#
#  Sun Industry Standards Source License Version 1.2
#  =================================================
#  The contents of this file are subject to the Sun Industry Standards
#  Source License Version 1.2 (the "License"); You may not use this file
#  except in compliance with the License. You may obtain a copy of the
#  License at http://gridengine.sunsource.net/Gridengine_SISSL_license.html
#
#  Software provided under this License is provided on an "AS IS" basis,
#  WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
#  WITHOUT LIMITATION, WARRANTIES THAT THE SOFTWARE IS FREE OF DEFECTS,
#  MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE, OR NON-INFRINGING.
#  See the License for the specific provisions governing your rights and
#  obligations concerning the Software.
#
#  The Initial Developer of the Original Code is: Sun Microsystems, Inc.
#
#  Copyright: 2001 by Sun Microsystems, Inc.
#
#  All Rights Reserved.
#
##########################################################################
#___INFO__MARK_END__
#
# set -x

# Reset PATH to a safe value  
#
PATH=/bin:/usr/bin:/usr/sbin:/usr/bsd:/usr/ucb

# Easy way to prevent clearing of screen
#
CLEAR=clear
#CLEAR=:


#-------------------------------------------------------------------------
# USEFUL LOCAL SHELL PROCEDURES

#-------------------------------------------------------------------------
# PrintError
PrintError() 
{
   fmt="Error: $1"
   shift
   $INFOTEXT -e "$fmt" $*
   $INFOTEXT -log "$fmt" $*
}

PrintErrorAndExit()
{
   exitcode=$1
   shift
   fmt="$1"
   shift
   PrintError "$fmt" $*
   exit $exitcode
}

#-------------------------------------------------------------------------
# ErrUsage: print usage string, exit
#
ErrUsage()
{
   if [ $# -gt 0 ]; then
      PrintError $*
   fi
   myname=`basename $0`
   $INFOTEXT -e \
   "\nUsage: %s <command>\n" \
   "   -adminuser <user>   set admin user\n" \
   "   -init               initialize CA infrastructure\n" \
   "   -req                generate a certificate request and private key\n" \
   "   -sign               sign a certificate request\n" \
   "   -copy               install user certificate and private key\n" \
   "   -verify <cert>      verify a <cert>\n" \
   "   -print <cert>       print a <cert>\n" \
   "   -printkey <key>     print a <key>\n" \
   "   -printcrl <crl>     print a <crl>\n" \
   "   -renew <user>       extend the certificate of <user>\n" \
   "   -renew_ca           extend the CA certificate\n" \
   "   -renew_sys          extend the daemon certificate\n" \
   "   -renew_sdm <g>      renew certificate of a SDM daemon with\n" \
   "                       g=Common Name of the SDM daemon\n" \
   "   -days <days>        days of validity of the certificate\n" \
   "   -sha1               use sha-1 instead of md5 as message digest\n" \
   "   -encryptkey         use des to encrypt the generated key with a passphrase\n" \
   "   -outdir <dir>       write to directory <dir>\n" \
   "   -cahost <host>      define CA hostname (CA master host)\n" \
   "   -cadir <dir>        define CALOCALTOP and CATOP settings\n" \
   "   -calocaltop <dir>   define CALOCALTOP setting\n" \
   "   -catop <dir>        define CATOP setting\n" \
   "   -pkcs12 <user>      generate pkcs12 format file for user <user> \n" \
   "   -pkcs12pwf <file>   pkcs12 password file\n" \
   "   -pkcs12dir <dir>    pkcs12 output directory\n" \
   "   -usercert <file>    generate certificates and keys for the users in <file>\n" \
   "   -userks             generate keystore for existing users\n" \
   "   -user <u:g:e>       generate certificates and keys for <u:g:e>\n" \
   "                       with u=Unix User, g=Common Name, e=email\n" \
   "   -sdm_daemon <u:g:e> generate certificate and key for a SDM daemon\n" \
   "                       with u=Unix User, g=Common Name, e=email\n" \
   "   -sdm_pkcs12 <g>     generate pkcs12 format file for SDM daemon\n" \
   "                       with g=Common Name of the SDM daemon\n" \
   "   -sys_pkcs12 <g>     generate pkcs12 format file for SGE daemon\n" \
   "                       with g=Common Name of the SGE daemon\n" \
   "   -ks <user>          generate a keystore file for <user>\n" \
   "   -kspwf <file>       keystore pw file\n" \
   "   -ksout <file>       keystore output file\n" \
   "   -sysks              generate keystore for SGE daemon\n" \
   "   -showCaTop          echo caTop path\n" \
   "   -showCaLocalTop     echo caLocalTop path\n" \
   $myname

   exit 1
}

#-------------------------------------------------------------------------
# Enter: input is read and returned to stdout. If input is empty echo $1
#
# USES: variable "$autoinst" 
#
Enter()
{
   if [ "$autoinst" = true ]; then
      $INFOTEXT $1
   else
      read INP
      if [ "$INP" = "" ]; then
         $INFOTEXT $1
      else
         $INFOTEXT $INP
      fi
   fi
}


#-------------------------------------------------------------------------
# Execute command as user $ADMINUSER and exit if exit status != 0
# if ADMINUSER = default then execute command unchanged
#
# uses binary "adminrun" form SGE distribution
#
# USES: variables "$verbose"    (if set to "true" print arguments)
#                  $ADMINUSER   (if set to "default" do not use "adminrun)
#                 "$V5UTILBIN"  (path to the binary in utilbin)
#
ExecuteAsAdmin()
{
   if [ "$verbose" = true ]; then
      $ECHO $*
   fi

   if [ $ADMINUSER = default ]; then
      $*
   else
      $V5UTILBIN/adminrun $ADMINUSER "$@"
   fi

   return $?
}

#-------------------------------------------------------------------------
# Execute command and return exit status
#
Execute()
{
   if [ "$verbose" = true ]; then
      $ECHO $*
   fi
   $*
   return $?
}

ExecRm() {
  Execute $RM -rf $* > /dev/null 2>&1
  files=""
  for i in $*; do
     if [ -f $i -o -d $i ]; then
        files="$files $i" 
     fi 
  done
  if [ "$files" != "" ]; then
    sleep 1
    for i in $files; do
       Execute $RM -rf $i  > /dev/null 2>&1
       if [ $? -ne 0 ]; then
          return 1
       fi
    done
  fi
  return 0
}

ExecRmAsAdmin() {
  ExecuteAsAdmin $RM -rf $*  > /dev/null 2>&1
  files=""
  for i in $*; do
     if [ -f $i -o -d $i ]; then
        files="$files $i" 
     fi 
  done
  if [ "$files" != "" ]; then
    sleep 1
    for i in $files; do
       ExecuteAsAdmin $RM -rf $i  > /dev/null 2>&1
       if [ $? -ne 0 ]; then
          return 1
       fi
    done
  fi
  return 0
}

#-------------------------------------------------------------------------
# Change the ownership of a file or directory
# Is only executed as root
#
ExecChown()
{
   if [ $rootinstalls = true ]; then
      Execute $CHOWN $*
      return $?
   else
      return 0
   fi
   
}

#--------------------------------------------------------------------------
# InitCA Init CA directories and get DN info
#
InitCA()
{
   $CLEAR
   $INFOTEXT -u "\nInitializing Certificate Authority (CA) for OpenSSL security framework"

   if [ -d $CATOP -a -d $CALOCALTOP ]; then
      $INFOTEXT -e "\nThere are already directories of the CA infrastructure in\n   %s\n   or\n   %s\n" "$CATOP" "$CALOCALTOP"
      $INFOTEXT -auto $AUTO -ask "y" "n" -def "y" -n \
         "Do you want to recreate your SGE CA infrastructure (y/n) [y] >> "
      if [ $? != 0 ]; then
         $INFOTEXT "We will not reinitialize your SGE CA infrastructure."
         exit 0
      fi
   fi

   MakeCADirs
   if [ $? != 0 ]; then
      PrintErrorAndExit 1 "CA initialization failed. Exit."
   fi
   MakeCAcert
   if [ $? -ne 0 ]; then
      PrintErrorAndExit 1 "CA initialization failed. Exit."
   fi
 
   MakeCert daemon $ME "SGE Daemon" none
   if [ $? -ne 0 ]; then
      PrintErrorAndExit 1 "CA initialization failed. Exit."
   fi
   
   MakeCert user $ME "SGE install user" none
   if [ $? -ne 0 ]; then
      PrintErrorAndExit 1 "CA initialization failed. Exit."
   fi

   if [ "$ADMINUSER" != default ]; then
      MakeCert user $ADMINUSER "SGE admin user" none
      if [ $? -ne 0 ]; then
         PrintErrorAndExit 1 "CA initialization failed. Exit."
      fi
   fi
}

#---------------------------------------------------------------------------
#  create a certificate request
#
RequestCert()
{
    # create a certificate request
    $REQ -new -keyout $outdir/$newkey -out $outdir/$newreq $DAYS
    RET=$?
    if [ $RET = 0 ]; then
      $INFOTEXT "Request is in %s" $outdir/$newreq
      $INFOTEXT "Private key is in %s" $outdir/$newkey
    else
      PrintErrorAndExit 1 "Creating a certificate request failed"
    fi
}

#---------------------------------------------------------------------------
#  Sign a certificate
#
SignCert()
{
    $CA -config $SGE_ROOT/util/sgeCA/sge_ssl.cnf -policy policy_anything $DAYS $BATCHMODE -notext -out $outdir/$newcert -infiles $indir/$newreq
    RET=$?
    if [ $RET = 0 ]; then
      $INFOTEXT "Signed certificate is in %s" $outdir/$newcert
    else
      PrintErrorAndExit 1 "Signing a certificate failed"
    fi
}

#---------------------------------------------------------------------------
#  verify a certificate
#
VerifyCert() 
{
   $VERIFY -CAfile $CATOP/$CACERT $newcert
   if [ $? != 0 ]; then
      PrintErrorAndExit 1 "Verification of certificate failed"
   fi
}

PrintX509() 
{
   if [ $1 = "cert" ]; then
      $X509 -in $2 -text
   elif [ $1 = "key" ]; then
      $X509KEY -in $newcert -text
   elif [ $1 = "crl" ]; then
      $X509CRL -in $newcert -text
   else
      PrintErrorAndExit 1 "Can not print %s" $1
   fi
   
   if [ $? != 0 ]; then
      PrintErrorAndExit 1 "Printing %s failed (%s)" $1 $2
   fi
}


#---------------------------------------------------------------------------
# CheckIfCaHost
#    If our hostname given in $1 is the same as "CAHOST"
#    echo "true" else echo "false"
#
# $1 = hostname
#
CheckIfCaHost()
{
   host=$1

   if [ "$host" = "$CAHOST" ]; then
      echo true
   else
      echo false
   fi
}

#--------------------------------------------------------------------------
# InstallKey
#
# $1 = user | daemon
# $2 = $ME ( username )
#
InstallKey()
{
   HOST=`$V5UTILBIN/gethostname -aname`
   result=`CheckIfCaHost $HOST`
   if [ "$result" != "true" ]; then 
      PrintError "You can install your private key and certificate only on the master host."
      return 1
   fi 

   if [ -d $CALOCALTOP/userkeys ]; then
      userkeydir=$CALOCALTOP/userkeys
   else
      PrintError "Can not find local userkey directory."
      return 1
   fi   

   if [ $1 = daemon ]; then
      keyfile=$CALOCALTOP/private/key.pem
      certfile=$CATOP/certs/cert.pem
      randfile=$CALOCALTOP/private/rand.seed
   else
      keyfile=$userkeydir/$ME/key.pem
      certfile=$userkeydir/$ME/cert.pem
      randfile=$userkeydir/$ME/rand.seed
      HOMEDIR=$HOME
   fi

   basedir=$CAHOMEKEYDIR
   if [ ! -d $basedir ]; then
      $V5UTILBIN/adminrun $2 $MKDIR -p $basedir
   fi

   if [ ! -d $basedir/certs ]; then
      $V5UTILBIN/adminrun $2 $MKDIR $basedir/certs
   fi

   if [ ! -d $basedir/private ]; then
      $V5UTILBIN/adminrun $2 $MKDIR $basedir/private
   fi

   if [ -f $basedir/private/key.pem ]; then
      $V5UTILBIN/adminrun $2 rm -f $basedir/private/key.pem
   fi

   if [ -f $basedir/private/rand.seed ]; then
      $V5UTILBIN/adminrun $2 rm -f $basedir/private/rand.seed
   fi

   if [ -f $basedir/certs/cert.pem ]; then
      $V5UTILBIN/adminrun $2 rm -f $basedir/certs/cert.pem
   fi

   $V5UTILBIN/adminrun $2 $CP $keyfile $basedir/private
   if [ $? -ne 0 ]; then
      PrintError "Could not copy key file (%s -> %s)" $keyfile $basedir/private
      return 1
   fi
   $V5UTILBIN/adminrun $2 $CP $randfile $basedir/private
   if [ $? -ne 0 ]; then
      PrintError "Could not copy rand file (%s -> %s)" $randfile $basedir/private
      return 1
   fi
   
   $V5UTILBIN/adminrun $2 $CHMOD 700 $basedir/private
   if [ $? -ne 0 ]; then
      PrintError "chmod for %s on private dir failed (%s)" $2 $basedir/private
      return 1
   fi
   
   $V5UTILBIN/adminrun $2 $CHMOD 600 $basedir/private/*
   if [ $? -ne 0 ]; then
      PrintError "chmod for %s on private files failed (%s/\*)" $2 $basedir/private
      return 1
   fi

   $V5UTILBIN/adminrun $2 $CP $certfile $basedir/certs
   if [ $? -ne 0 ]; then
      PrintError "Could not copy cert file (%s -> %s)" $certfile $basedir/certs
      return 1
   fi
   
   $V5UTILBIN/adminrun $2 $CHMOD 755 $basedir/certs
   if [ $? -ne 0 ]; then
      PrintError "chmod for %s on certs dir failed (%s)" $2 $basedir/certs
      return 1
   fi
   
   $V5UTILBIN/adminrun $2 $CHMOD 644 $basedir/certs/*
   if [ $? -ne 0 ]; then
      PrintError "chmod for %s on cert files failed (%s/\*)" $2 $basedir/certs
      return 1
   fi

   $INFOTEXT "Certificate and private key for user %s have been installed" $ME

   return 0
}


#--------------------------------------------------------------------------
# MakeCAcert create CA certificate and private key
#
#
MakeCAcert()
{
   $INFOTEXT -u "\nCreating CA certificate and private key"
   $INFOTEXT -e "Please give some basic parameters to create the distinguished name (DN)\n" \
   "for the certificates.\n\n" \
   "We will ask for\n" \
   "   - the two letter country code\n" \
   "   - the state\n" \
   "   - the location, e.g city or your buildingcode\n" \
   "   - the organization (e.g. your company name)\n" \
   "   - the organizational unit, e.g. your department\n" \
   "   - the email address of the CA administrator (you!)\n"

   $INFOTEXT -wait -auto $AUTO -n "\nHit <RETURN> to continue >> "
   # $CLEAR

   done=false
   while [ $done = false ]; do

      if [ "$AUTO" = "true" ]; then
            CA_C=`echo $CSP_COUNTRY_CODE | env LC_ALL=C tr "[a-z]" "[A-Z]"`
            CA_ST="$CSP_STATE"
            CA_L="$CSP_LOCATION"
            CA_O="$CSP_ORGA"
            CA_OU="$CSP_ORGA_UNIT"
            CA_EMAIL="$CSP_MAIL_ADDRESS"
      else
         dndone=false
         while [ $dndone = false ]; do
            $INFOTEXT -n "Please enter your two letter country code, e.g. 'US' >> "
            INP=`Enter ""`
            if [ "$INP != " -a `echo $INP | wc -c` = 3 ]; then
               CA_C=`echo $INP | env LC_ALL=C tr "[a-z]" "[A-Z]"`
               dndone=true
            fi
         done

         dndone=false
         while [ $dndone = false ]; do
            $INFOTEXT -n "Please enter your state >> "
            INP=`Enter ""`
            CA_ST="$INP"
            if [ "$INP" != "" ]; then
               CA_ST="$INP"
               dndone=true
            fi
         done

         dndone=false
         while [ $dndone = false ]; do
            $INFOTEXT -n "Please enter your location, e.g city or buildingcode >> "
            INP=`Enter ""`
            CA_L="$INP"
            if [ "$INP" != "" ]; then
               CA_L="$INP"
               dndone=true
            fi
         done

         dndone=false
         while [ $dndone = false ]; do
            $INFOTEXT -n "Please enter the name of your organization >> "
            INP=`Enter ""`   
            if [ "$INP" != "" ]; then
               CA_O="$INP"
               dndone=true
            fi
         done

         dndone=false
         while [ $dndone = false ]; do
            $INFOTEXT -n "Please enter your organizational unit, e.g. your department >> "
            INP=`Enter ""`    
            CA_OU="$INP"
            if [ "$INP" != "" ]; then
               CA_OU="$INP"
               dndone=true
            fi
         done

         dndone=false
         while [ $dndone = false ]; do
            $INFOTEXT -n "Please enter the email address of the CA administrator >> "
            INP=`Enter ""`   
            if [ "$INP" != "" ]; then
               CA_EMAIL="$INP"
               dndone=true
            fi
         done
      fi


      $CLEAR
      $INFOTEXT -e "\nYou selected the following basic data for the distinguished name of\n" \
      "your certificates:\n\n" \
      "Country code:         %s=%s\n" \
      "State:                %s=%s\n" \
      "Location:             %s=%s\n" \
      "Organization:         %s=%s\n" \
      "Organizational unit:  %s=%s\n" \
      "CA email address:     %s=%s\n" \
      C "$CA_C" ST "$CA_ST" L "$CA_L" O "$CA_O" OU "$CA_OU" emailAddress "$CA_EMAIL"
      
      $INFOTEXT -auto $AUTO -ask "y" "n" -def "y" -n \
         "Do you want to use these data (y/n) [y] >> "
      if [ $? = 0 ]; then
         done=true
 
         TMPFILE=/tmp/sge_ca$$.tmp
         TMPFILE1=/tmp/sge_ca1$$.tmp
         ExecRm $TMPFILE $TMPFILE1
         if [ $? -ne 0 ]; then
            PrintError "Could not delete file %s" $TMPFILE
            return 1
         fi
         
         ExecRm $TMPFILE1
         if [ $? -ne 0 ]; then
            PrintError "Could not delete file %s" $TMPFILE1
            return 1
         fi
         
         $TOUCH $TMPFILE
         if [ $? -ne 0 ]; then
            PrintError "Could not touch file %s" $TMPFILE
            return 1
         fi
         $TOUCH $TMPFILE1
         if [ $? -ne 0 ]; then
            PrintError "Could not touch file %s" $TMPFILE1
            return 1
         fi
         
         echo C="$CA_C" >> $TMPFILE
         echo ST="$CA_ST" >> $TMPFILE
         echo L="$CA_L" >> $TMPFILE
         echo O="$CA_O" >> $TMPFILE
         echo OU="$CA_OU" >> $TMPFILE
         ExecuteAsAdmin $CP $TMPFILE $CATOP/dn.info
         if [ $? -ne 0 ]; then
            PrintError "Could not copy file (%s -> %s)" $TMPFILE $CATOP/dn.info
            return 1
         fi
         
         echo CN="SGE Certificate Authority" >> $TMPFILE
         echo userId=CA >> $TMPFILE
         echo emailAddress=$CA_EMAIL >> $TMPFILE

         export CATOP
         Execute cat $CONFIG_DIR/sge_ssl_template.cnf $TMPFILE > $TMPFILE1
         if [ $? -ne 0 ]; then
            PrintError "Could not cat file (%s)" $CONFIG_DIR/sge_ssl_template.cnf
            return 1
         fi

         if [ $ADMINUSER != default -a $rootinstalls = true ]; then
            # echo +++ $ADMINUSER
            MakeRandFile $CALOCALTOP/private/rand.seed $ADMINUSER
         else
            # echo +++ $ME
            MakeRandFile $CALOCALTOP/private/rand.seed $ME
         fi
         if [ $? -ne 0 ]; then
            return 1
         fi
         RANDFILE=$CALOCALTOP/private/rand.seed; export RANDFILE

         umask 077
         $INFOTEXT "Creating CA certificate and private key"
         ExecuteAsAdmin $REQ -config $TMPFILE1 -new -x509 \
              -keyout ${CALOCALTOP}/private/$CAKEY -out ${CATOP}/$CACERT $DAYS
         status=$?
         umask 022

         ExecuteAsAdmin $CHMOD 644 ${CATOP}/$CACERT
         if [ $? -ne 0 ]; then
            PrintError "chmod as %s failed (%s)" $ADMINUSER ${CATOP}/$CACERT
            return 1
         fi
         rm -f $TMPFILE $TMPFILE1

         if [ $status != 0 ]; then
            PrintError "Failed to create CA certificate and private key. Exit"
            return 1
         fi

      else
         $CLEAR
      fi
   done

   $INFOTEXT -wait -auto $AUTO -n "\nHit <RETURN> to continue >> "
   $CLEAR
   return 0
}

#--------------------------------------------------------------------------
# MakeRandFile create a random data file
#  
# $1 = <randfilename>
# $2 = <owner>
#
MakeRandFile()
{

   # OpenSSL uses /dev/urandom by default so if it's there, don't
   # polute the PRNG with predictable data.
   rfile="/dev/urandom"
   if [ ! -r /dev/urandom ]; then
      if [ -r /dev/random ]; then 
         rfile=/dev/random
      elif [ -r /bin/vi ]; then
         rfile="/bin/vi"
      fi
   fi
   # $INFOTEXT "Creating RANDFILE from '%s' in '%s'" $rfile $1

   RANDFILE=/tmp/.rand.$$; export RANDFILE;
   $V5UTILBIN/adminrun $2 dd if=$rfile of=$RANDFILE count=2048 > /dev/null 2>&1
   if [ $? -lt 0 ]; then
       PrintError "Could not create random number for (%s -> %s)" $rfile $RANDFILE
       return 1
   fi
   $V5UTILBIN/adminrun $2 $OPENSSL rand -rand $RANDFILE -out $1 2048  > /dev/null 2>&1
   if [ $? -ne 0 ]; then
       PrintError "bootstraping of rand command as user %s failed (%s -> %s)" $2 $RANDFILE $1
       return 1
   fi
   
   $V5UTILBIN/adminrun $2 $OPENSSL rand -rand $rfile -out $1 2048  > /dev/null 2>&1
   if [ $? -ne 0 ]; then
       PrintError "openssl rand command as user %s failed (%s -> %s)" $2 $rfile $1
       return 1
   fi

   $V5UTILBIN/adminrun $2 $RM $RANDFILE > /dev/null 2>&1
   if [ $? -ne 0 ]; then
       PrintError "Could not delete file %s as user %s" $RANDFILE $2
       return 1
   fi
   
   $V5UTILBIN/adminrun $2 $CHMOD 644 $1 > /dev/null 2>&1
   if [ $? -ne 0 ]; then
       PrintError "chmod as user %s on file %s failed" $2 $1
       return 1
   fi
   
   # echo "--------------"
   # ls -l $rfile $1
   # echo "--------------"

}


#--------------------------------------------------------------------------
# MakeUserCert create user certificates and keys for Windows Admin user
#
# $1 = certificate type "user" or "sdm_daemon"
# $2 = <user:gecos:email>
#
MakeUserCert()
{
   cert_type=$1
   line="$2"

   unixuser=`echo $line|cut -d: -f1`
   gecos=`echo $line|cut -d: -f2`
   email=`echo $line|cut -d: -f3`

   # echo $unixuser:$gecos:$email
   if [ "$unixuser" = "" ]; then
      PrintErrorAndExit 1 "no Unix user specified. Exit."
   fi   

   if [ "$gecos" = "" ]; then
      gecos=$unixuser
   fi   
   if [ "$email" = "" ]; then
      email=$unixuser
   fi   

   if [ "$ADMINUSER" = default ]; then
      entries=`grep "CN=$gecos" $CATOP/index.txt|grep '^V'|wc -l`
   else 
      entries=`$V5UTILBIN/adminrun $ADMINUSER grep "CN=$gecos" $CATOP/index.txt|grep '^V'|wc -l`
   fi
   if [ $entries = 0 ]; then
      $INFOTEXT "Generating %s certificate and key for '%s' ('%s','%s')." \
         "$cert_type" "$unixuser" "$gecos" "$email"
      MakeCert $cert_type "$unixuser" "$gecos" "$email"
      if [ $? -ne 0 ]; then
         return 1
      fi
   else
      PrintError "Please renew %s certificate for '%s' ('%s','%s') instead." \
                 "$cert_type" "$unixuser" "$gecos" "$email"
      # RenewCert user $unixuser
      return 1
   fi
   return 0
}

#--------------------------------------------------------------------------
# MakeUserCerts create user certificates and keys from userfile
# userfile contains a list of entries of the following format per user.
#
# <unix username>:<gecos field>:<user's email address>
#
# $1 = <userfile>
#
MakeUserCerts()
{
   if [ ! -f "$1" ]; then
      PrintErrorAndExit 1 "no valid userfile '%s'. Exit." $1
   fi

   userfile=$1

   cat $userfile | while read line; do
      MakeUserCert user "$line"
   done   
}

#--------------------------------------------------------------------------
# MakeUserKeystores create keystores for existing users in 
# $CALOCALTOP/userkeys 
#
MakeUserKeystores()
{
   if [ "$ksoutfile" = "" ]; then
      ksoutfile_saved=$ksoutfile
   fi

   remove_kspwfile=false
   if [ "$kspwfile" = "" ]; then
      touch /tmp/tmp.$$
      kspwfile=/tmp/tmp.$$
      remove_kspwfile=true
   fi   
   for user in `ls $CALOCALTOP/userkeys`; do
      certfile=$CALOCALTOP/userkeys/$user/cert.pem
      if [ -r $certfile ]; then 
         ksoutfile=$CALOCALTOP/userkeys/$user/keystore
         touch $ksoutfile
         $CHOWN $user $ksoutfile
         $CHMOD 600 $ksoutfile
         MakeKeystore user "$user"
      fi
   done   
   if [ "$remove_kspwfile" = "true" ]; then
      rm $kspwfile
   fi
   ksoutfile=$ksoutfile_saved
}

#--------------------------------------------------------------------------
# MakeSysKeystore create keystore for SGE Daemon
# $CALOCALTOP/private 
#
MakeSysKeystore()
{
   if [ "$ksoutfile" = "" ]; then
      ksoutfile_saved=$ksoutfile
   fi

   remove_kspwfile=false
   if [ "$kspwfile" = "" ]; then
      touch /tmp/tmp.$$
      kspwfile=/tmp/tmp.$$
      remove_kspwfile=true
   fi   
   certfile=$CATOP/certs/cert.pem
   if [ -r $certfile ]; then 
      ksoutfile=$CALOCALTOP/private/keystore
      ExecuteAsAdmin touch $ksoutfile
      ExecuteAsAdmin chmod 600 $ksoutfile
      MakeKeystore sge_daemon "SGEDaemon"
   fi
   if [ "$remove_kspwfile" = "true" ]; then
      rm $kspwfile
   fi
   ksoutfile=$ksoutfile_saved
}



#--------------------------------------------------------------------------
# MakeKeystore create keystore file of user's certificate and key
#
# $1 = user or sge_daemon
# $2 = <unix user>
#
MakeKeystore()
{
   type=$1
   if [ "$type" != "user" -a "$type" != "sge_daemon" ]; then
      PrintError "unknown type $type only user or sge_daemon allowed"
      return 1
   fi
   myuser=$2
   if [ "$myuser" = "" ]; then 
      PrintError "username is empty"
      return 1
   fi
   CA_ARGS="-catop $CATOP"
   CA_ARGS="$CA_ARGS -calocaltop $CALOCALTOP"
   CA_ARGS="$CA_ARGS -cascript $ROOT_PATH/util/sgeCA/sge_ca"
   CA_ARGS="$CA_ARGS -cahost $CAHOST -adminuser $ADMINUSER"
   CA_ARGS="$CA_ARGS initks $type $myuser $ksoutfile"
   if [ "$kspwfile" != "" ]; then
      CA_ARGS="$CA_ARGS $kspwfile"
   fi

   if [ "$JAVA_HOME" = "" ]; then 
      PrintError "JAVA_HOME not set"
      return 1
   else   
      JAVA=$JAVA_HOME/bin/java
   fi

   JVM_ARGS="-cp $ROOT_PATH/lib/juti.jar"
   JVM_ARGS="$JVM_ARGS -Djava.util.logging.config.file=$ROOT_PATH/util/sgeCA/logging.properties"

   $JAVA $JVM_ARGS com.sun.grid.ca.Main $CA_ARGS 
}

#--------------------------------------------------------------------------
# MakePKCS12 create pkcs12 file of user's certificate and key
#
# $1 = "user" or "sdm_daemon" or "sge_daemon"
# $2 = <unix user> or <sdm daemon>
#
MakePKCS12()
{
   if [ "$1" = "user" ]; then
      if [ "$2" = "" ]; then
         PrintError "no valid user '%s'." $1
         return 1
      fi
      keyowner=$2
      unixuser=$2
      KEYFILE=$CALOCALTOP/userkeys/$keyowner/key.pem
      CERTFILE=$CALOCALTOP/userkeys/$keyowner/cert.pem
   elif [ "$1" = "sdm_daemon" ]; then
      if [ "$2" = "" ]; then
         PrintError "no valid sdm daemon '%s'." $1
         return 1
      fi
      keyowner=$2
      unixuser=$ADMINUSER
      KEYFILE=$CALOCALTOP/daemons/$keyowner/key.pem
      CERTFILE=$CALOCALTOP/daemons/$keyowner/cert.pem
   elif [ "$1" = "sge_daemon" ]; then
      keyowner=$2
      unixuser=$ADMINUSER
      KEYFILE=$CALOCALTOP/private/key.pem
      CERTFILE=$CATOP/certs/cert.pem
   else
      PrintError "valid argument: %s" $1
      return 1
   fi
   

   pwoptions=""
   if [ "$passinfile" != "" ]; then
      pwoptions="-passout file:$passinfile"
   fi

   myoutdir="."
   if [ "$pkcs12outdir" != "" ]; then
      myoutdir="$pkcs12outdir"
   fi

   $INFOTEXT "Generating %s/%s.p12." "$myoutdir" "$keyowner"
   # create rand.seed file
   RSFILE=/tmp/rand.seed.$$
   MakeRandFile $RSFILE $unixuser
   if [ $? -ne 0 ]; then
      return 1
   fi
   RANDFILE=$RSFILE; export RANDFILE

   $P12 $pwoptions -export -nodes -inkey $KEYFILE -out $myoutdir/$keyowner.p12 -in $CERTFILE -certfile $CATOP/cacert.pem -caname "SGE CA"
   if [ $? -ne 0 ]; then
      PrintError "openssl pkcs12 command failed"
      return 1
   fi
   $RM -f $RANDFILE
}

#--------------------------------------------------------------------------
# MakePKCS12ForUsers create pkcs12 file of user certificate and keys from userfile
# userfile contains a list of entries of the following format per user.
#
# <unix username>:<gecos field>:<user's email address>
#
# $1 = <userfile>
#
MakePKCS12ForUsers()
{
   if [ ! -f "$1" ]; then
      PrintErrorAndExit 1 "no valid userfile '%s'. Exit." $1
   fi
   
   cat $1 | while read line; do
      unixuser=`echo $line|cut -d: -f1`
      $INFOTEXT "Generating %s/%s.p12." \
         "$pkcs12outdir" "$unixuser"
      pkcs12outdir=$CALOCALTOP/userkeys/$unixuser
      MakePKCS12 user "$unixuser"
   done   
}

#--------------------------------------------------------------------------
# DumpUsers dump user info 
#
DumpUsers()
{
   CERTDIR=$CALOCALTOP/userkeys
   RSFILE=/tmp/rand.$$

   # create rand.seed file
   MakeRandFile $RSFILE $USER
   if [ $? -ne 0 ]; then
      exit 1
   fi
   RANDFILE=$RSFILE; export RANDFILE

   $INFOTEXT "Dumping users to $outdir/dumped_users.txt"
   for i in `ls $CERTDIR`; do
      $X509 -in $CERTDIR/$i/cert.pem -subject -noout|$AWK -F '/' '{print $8 ":" $7 ":" $9}' | sed -e 's/UID=//' -e 's/CN=//' -e 's/emailAddress=//' >> $outdir/dumped_users.txt
      if [ $? -ne 0 ]; then
         PrintError "openssl x509 command for user %s failed" $i
      fi
   done
}

#--------------------------------------------------------------------------
# MakeCert create certificate and private key for daemon
#
# $1 = certificate type ("daemon" or "user"  or "sdm_daemon")
# $2 = userId   (Unix user name)
# $3 = commonname         (e.g. passwd gecos field or name of sdm_daemon)
# $4 = email address
#
MakeCert()
{
   $INFOTEXT -u "\nCreating '%s' certificate and key for %s" "$1" "$3"

   TMPFILE=/tmp/sge_ca$$.tmp
   TMPFILE1=/tmp/sge_ca1$$.tmp
   $RM -f $TMPFILE $TMPFILE1
   Execute cp $CATOP/dn.info $TMPFILE
   if [ $? -ne 0 ]; then
      PrintError "Could not copy file (%s -> %s)" $CATOP/dn.info $TMPFILE
      return 1
   fi

   # 
   #  For SDM daemon the uid is always "sdm_daemon"
   #  the SdmCATrustManagerLoginModule needs this information
   #  to distingush between daemon and user certificates
   #
   if [ $1 = sdm_daemon ]; then
      echo userId=sdm_daemon_$2 >> $TMPFILE
   else
      echo userId=$2 >> $TMPFILE
   fi
   echo CN=$3 >> $TMPFILE
   echo emailAddress=$4 >> $TMPFILE

   Execute cat $CONFIG_DIR/sge_ssl_template.cnf $TMPFILE > $TMPFILE1
   if [ $? -ne 0 ]; then
      PrintError "Could not cat file (%s, %s -> %s)" $CONFIG_DIR/sge_ssl_template.cnf $TMPFILE $TMPFILE1
      return 1
   fi

   if [ $1 = daemon ]; then
      KEYDIR=$CALOCALTOP/private
      KEYFILE=$CALOCALTOP/private/key.pem
      REQFILE=$CALOCALTOP/private/req.pem
      CERTFILE=$CATOP/certs/cert.pem
      RSFILE=$CALOCALTOP/private/rand.seed
   elif [ $1 = user ]; then
      KEYDIR=$CALOCALTOP/userkeys/$2
      KEYFILE=$KEYDIR/key.pem
      REQFILE=$KEYDIR/req.pem
      CERTFILE=$KEYDIR/cert.pem
      CERTFILE_PUBLIC_DIR=$CATOP/usercerts/$2
      RSFILE=$KEYDIR/rand.seed
      ExecRm $KEYDIR
      ExecuteAsAdmin $MKDIR $KEYDIR
   elif [ $1 = sdm_daemon ]; then
      KEYDIR=$CALOCALTOP/daemons/$3
      KEYFILE=$KEYDIR/key.pem
      REQFILE=$KEYDIR/req.pem
      CERTFILE=$KEYDIR/cert.pem
      RSFILE=$KEYDIR/rand.seed
      ExecRm $KEYDIR
      ExecuteAsAdmin $MKDIR $KEYDIR
   else 
      PrintError "Unknown certificate type %s" $1
      return 1
   fi

   # create rand.seed file
   if [ "$ADMINUSER" = default ]; then
      MakeRandFile $RSFILE  root
   else
      MakeRandFile $RSFILE $ADMINUSER
   fi
   if [ $? -ne 0 ]; then
      return 1
   fi

   RANDFILE=$RSFILE; export RANDFILE

   umask 077

   # create a certificate request
   ExecuteAsAdmin $REQ -config $TMPFILE1 -new -keyout $KEYFILE -out $REQFILE $DAYS
   if [ $? != 0 ]; then
      PrintError "Can't create %s or %s. Exit." $KEYFILE $REQFILE
      return 1
   fi  

   # sign certificate request
   ExecuteAsAdmin $CA -config $TMPFILE1 -policy policy_anything -batch $DAYS \
                      -notext -out $CERTFILE -infiles $REQFILE
   if [ $? != 0 ]; then
      PrintError "Can't sign certificate request %s. Exit." $REQFILE 
      return 1
   fi
   ExecuteAsAdmin $CHMOD 644 $CERTFILE
   if [ $? != 0 ]; then
      PrintError "chmod as %s failed (%s)" $ADMINUSER $CERTFILE
      return 1
   fi
   
   if [ "$1" = user ]; then
      ExecuteAsAdmin $MKDIR -m 755 -p $CERTFILE_PUBLIC_DIR
      ExecuteAsAdmin $CP $CERTFILE $CERTFILE_PUBLIC_DIR
      ExecuteAsAdmin $CHMOD 644 $CERTFILE_PUBLIC_DIR/cert.pem
   fi
   
   $RM -f $TMPFILE $TMPFILE1 

   Execute $CHMOD 700 $KEYDIR
   if [ $? != 0 ]; then
      PrintError "chmod failed (%s)" $KEYDIR
      return 1
   fi
   Execute $CHMOD 600 $KEYDIR/*
   if [ $? != 0 ]; then
      PrintError "chmod failed (%s/\*)" $KEYDIR
      return 1
   fi
   Execute $CHMOD 600 $KEYDIR/rand.seed
   if [ $? != 0 ]; then
      PrintError "chmod failed (%s)" $KEYDIR/rand.seed
      return 1
   fi
   if [ $1 = daemon ]; then
      $INFOTEXT "created and signed certificate for SGE daemons" 
   elif [ $1 = sdm_daemon ]; then
      $INFOTEXT "created and signed certificate for sdm_daemon '%s' in '%s'" $3 $KEYDIR
   else
      # check if user exists and chown if yes
      id $2  > /dev/null 2>&1
      if [ $? = 0 ]; then
         ExecChown -R $2 $KEYDIR
         if [ $? != 0 ]; then
            PrintError "chown to %s failed (%s)" $2 $KEYDIR
            return 1
         fi
      fi   
      $INFOTEXT "created and signed certificate for user '%s' in '%s'" $2 $KEYDIR
   fi

   umask 022
   return 0
}

#--------------------------------------------------------------------------
# RenewCA renew a selfsigned CA certificate
#
RenewCA()
{
   $INFOTEXT -u "\nRenewing CA certificate"

   CAKEYDIR=$CALOCALTOP/private
   CAKEYFILE=$CALOCALTOP/private/cakey.pem
   CACERTFILE=$CATOP/cacert.pem
   RSFILE=$CALOCALTOP/private/rand.seed
   NEWCACERTFILE=$CATOP/cacert.pem.new
   OLDCACERTFILE=$CATOP/cacert.pem.`date | tr " " "_"`
   RANDFILE=$RSFILE; export RANDFILE

   ExecuteAsAdmin $X509 -in $CACERTFILE -signkey $CAKEYFILE $DAYS -out $NEWCACERTFILE
   if [ $? != 0 ]; then
      PrintError "openssl x509 as %s failed (RenewCA)" $ADMINUSER
      return 1
   fi

   ExecuteAsAdmin $CP $CACERTFILE $OLDCACERTFILE
   if [ $? != 0 ]; then
      PrintError "Could not copy file as %s (%s -> %s)" $ADMINUSER $CACERTFILE $OLDCACERTFILE
      return 1
   fi
   ExecuteAsAdmin $CHMOD 644 $CACERTFILE
   if [ $? != 0 ]; then
      PrintError "chmod as %s failed (%s)" $ADMINUSER $CACERTFILE
      return 1
   fi
   ExecuteAsAdmin $MV $NEWCACERTFILE $CACERTFILE
   if [ $? != 0 ]; then
      PrintError "Could not move file as %s (%s -> %s)" $ADMINUSER $NEWCACERTFILE $CACERTFILE
      return 1
   fi
   ExecuteAsAdmin $CHMOD 644 $CACERTFILE
   if [ $? != 0 ]; then
      PrintError "chmod as %s failed (%s)" $ADMINUSER $CACERTFILE
      return 1
   fi
   return 0
}


#--------------------------------------------------------------------------
# RenewCert renew a certificate
#
# $1 = certificate type ("daemon" or "user" or "sdm_daemon"
# $2 = userId   (Unix user name of common name of sdm_damon)
#
RenewCert()
{
   ADMINRUN_NO_EXIT=true # ExecuteAsAdmin should not exit, 
                         # we need to cleanup the file permissions

   # in the gridengine environment only root user is allowed
   # to renew certificates
   # for haithabu the admin user can also renew certificates
   if [ "$rootinstalls" != true -a $SGE_CNF = true ]; then
      PrintError "Only root user can renew certificates!"
      return 1
   fi
  
   if [ "$1" = daemon ]; then
      $INFOTEXT -u "\nRenewing daemon certificate"
      if [ "$2" = default ]; then
         $2=root
      fi
   else
      $INFOTEXT -u "\nRenewing  '%s' '%s' certificate" "$2" "$1"
   fi

   TMPFILE=/tmp/sge_ca$$.tmp
   TMPFILE1=/tmp/sge_ca1$$.tmp
   $RM -f $TMPFILE $TMPFILE1
   Execute cp $CATOP/dn.info $TMPFILE
   if [ $? != 0 ]; then
      PrintError "Could not copy file (%s -> %s)" $CATOP/dn.info $TMPFILE
      return 1
   fi
   echo userId=$2 >> $TMPFILE
   echo CN="dummy" >> $TMPFILE
   echo emailAddress="dummy" >> $TMPFILE
   Execute cat $CONFIG_DIR/sge_ssl_template.cnf $TMPFILE > $TMPFILE1
   if [ $? != 0 ]; then
      PrintError "Could not cat file (%s, %s -> %s)" $CONFIG_DIR/sge_ssl_template.cnf $TMPFILE > $TMPFILE1
      return 1
   fi


   if [ "$1" = daemon ]; then
      KEYDIR=$CALOCALTOP/private
      KEYFILE=$CALOCALTOP/private/key.pem
      REQFILE=$CALOCALTOP/private/req.pem
      CERTFILE=$CATOP/certs/cert.pem
      NEWCERTFILE=$CATOP/certs/cert.pem.new
      OLDCERTFILE=$CATOP/certs/cert.pem.old
      RSFILE=$CALOCALTOP/private/rand.seed
      CRLFILE=$CATOP/ca-crl.pem
   elif [ $1 = sdm_daemon ]; then
      KEYDIR=$CALOCALTOP/daemons/$2
      NEWKEYBASEDIR=/tmp/sge_ca_dir_$$
      NEWKEYDIR=$NEWKEYBASEDIR/daemons/$2
      KEYFILE=$NEWKEYDIR/key.pem
      REQFILE=$NEWKEYDIR/req.pem
      CERTFILE=$NEWKEYDIR/cert.pem
      NEWCERTFILE=$NEWKEYDIR/cert.pem.new
      OLDCERTFILE=$NEWKEYDIR/cert.pem.old
      RSFILE=$NEWKEYDIR/rand.seed
      CRLFILE=$CATOP/ca-crl.pem
   elif [ $1 = user ]; then
      KEYDIR=$CALOCALTOP/userkeys/$2
      NEWKEYBASEDIR=/tmp/sge_ca_dir_$$
      NEWKEYDIR=$NEWKEYBASEDIR/userkeys/$2
      KEYFILE=$NEWKEYDIR/key.pem
      REQFILE=$NEWKEYDIR/req.pem
      CERTFILE=$NEWKEYDIR/cert.pem
      NEWCERTFILE=$NEWKEYDIR/cert.pem.new
      OLDCERTFILE=$NEWKEYDIR/cert.pem.old
      RSFILE=$NEWKEYDIR/rand.seed
      CRLFILE=$CATOP/ca-crl.pem
      CERTFILE_PUBLIC_DIR=$CATOP/usercerts/$2
   else 
      PrintError "Unknown certificate type %s" $1
      return 1
   fi

   # create rand.seed file
   # rand.seed already exists, therefore no MakeRandFile $RSFILE $2
   RANDFILE=$RSFILE; export RANDFILE

   if [ "$1" = daemon ]; then
      Execute $CHMOD 644 $CERTFILE
      if [ $? != 0 ]; then
         PrintError "chmod failed (%s)" $CERTFILE
         return 1
      fi
   else
      Execute $MKDIR -p $NEWKEYDIR
      if [ $? != 0 ]; then
         PrintError "mkdir failed (%s)" $NEWKEYDIR
         return 1
      fi
      Execute $CP $KEYDIR/* $NEWKEYDIR
      if [ $? != 0 ]; then
         PrintError "Could not copy files (%s/\* -> %s)" $KEYDIR/* $NEWKEYDIR
         return 1
      fi
      if [ "$ADMINUSER" = default ]; then
         ExecChown -R root $NEWKEYDIR
      else
         ExecChown -R $ADMINUSER $NEWKEYDIR
      fi
      if [ $? != 0 ]; then
         PrintError "chown failed (%s)" $NEWKEYDIR
         return 1
      fi
      if [ $? != 0 ]; then
         PrintError "chown failed (%s)" $NEWKEYDIR
         return 1
      fi
      Execute $CHMOD 644 $NEWKEYDIR/*
      if [ $? != 0 ]; then
         PrintError "chmod failed (%s/\*)" $NEWKEYDIR
         return 1
      fi
      
   fi

   umask 077

   # revoke the old certificate and create the certificate revocation list
   ExecuteAsAdmin $CA -config $TMPFILE1 -policy policy_anything \
                      -batch $DAYS \
                      -revoke $CERTFILE 

   if [ $? != 0 ]; then
      PrintError "Can't revoke %s." $CERTFILE
      return 1
   else

      # sign certificate request
      ExecuteAsAdmin $CA -config $TMPFILE1 \
                         -policy policy_anything -batch $DAYS \
                         -notext -out $NEWCERTFILE -infiles $REQFILE

      if [ $? != 0 ]; then
         PrintError "Can't renew %s." $CERTFILE
         return 1
      else  
      
         # create the certificate revocation list
         ExecuteAsAdmin $CA -config $TMPFILE1 -policy policy_anything \
                            -batch $DAYS \
                            -gencrl -out ${CRLFILE}.tmp

         if [ $? != 0 ]; then
            PrintError "Can't generate revocation list %s.." $CRLFILE
            return 1
         else
            if [ $1 = daemon ]; then
               $INFOTEXT "renewed certificate for SGE daemons" 
            else
               $INFOTEXT "renewed certificate for user '%s' in '%s'" $2 $KEYDIR
            fi
         fi  

         if [ -f $OLDCERTFILE ]; then
            ExecuteAsAdmin $RM -f $OLDCERTFILE
            if [ $? != 0 ]; then
               PrintError "Can not delete old cert file (%s)"  $OLDCERTFILE
               return 1
            fi
         fi

         ExecuteAsAdmin $CP $CERTFILE $OLDCERTFILE
         if [ $? != 0 ]; then
            PrintError "Could not copy file (%s -> %s)"  $CERTFILE $OLDCERTFILE
            return 1
         fi
         ExecuteAsAdmin $MV $NEWCERTFILE $CERTFILE
         if [ $? != 0 ]; then
            PrintError "Could not move file (%s -> %s)"  $NEWCERTFILE $CERTFILE
            return 1
         fi
         ExecuteAsAdmin $CHMOD 644 $CERTFILE
         if [ $? != 0 ]; then
            PrintError "chmod failed (%s)" $CERTFILE
            return 1
         fi

         # copy renewed cert.pem to $CERTFILE_PUBLIC_DIR
         if [ "$1" = user ]; then
            umask 022
            if [ ! -d "$CERTFILE_PUBLIC_DIR" ]; then
               ExecuteAsAdmin $MKDIR -m 755 -p $CERTFILE_PUBLIC_DIR
               if [ $? != 0 ]; then
                  umask 077
                  PrintError "Could not create %s"  $CERTFILE_PUBLIC_DIR
                  return 1
               fi
            fi
            ExecuteAsAdmin $CP $CERTFILE $CERTFILE_PUBLIC_DIR
            if [ $? != 0 ]; then
               umask 077
               PrintError "Could not copy file (%s -> %s)"  $CERTFILE $CERTFILE_PUBLIC_DIR
               return 1
            fi
            ExecuteAsAdmin $CHMOD 644 $CERTFILE_PUBLIC_DIR/cert.pem
            if [ $? != 0 ]; then
               umask 077
               PrintError "Could not chown 644 file %s"  $CERTFILE_PUBLIC_DIR/cert.pem
               return 1
            fi
            umask 077
         fi
      
         if [ "$1" != daemon ]; then
            Execute $CP -f $NEWKEYDIR/* $KEYDIR
            if [ $? != 0 ]; then
               PrintError "Could not copy files (%s/\* -> %s)"  $NEWKEYDIR $KEYDIR
               return 1
            fi
         fi

         ExecuteAsAdmin $MV ${CRLFILE}.tmp $CRLFILE
         if [ $? != 0 ]; then
            PrintError "Could not move file (%s -> %s)"  ${CRLFILE}.tmp $CRLFILE
            return 1
         fi
         ExecuteAsAdmin $CHMOD 644 $CRLFILE 
         if [ $? != 0 ]; then
            PrintError "chmod failed (%s)" $CERTFILE
            return 1
         fi
      fi
 
   fi

   Execute $RM -f $TMPFILE $TMPFILE1 

   if [ "$1" != daemon ]; then
      ExecRm $NEWKEYBASEDIR
      Execute $CHMOD 500 $KEYDIR
      if [ $? != 0 ]; then
         PrintError "chmod failed (%s)" $KEYDIR
         return 1
      fi
      Execute $CHMOD 600 $KEYDIR/*
      if [ $? != 0 ]; then
         PrintError "chmod failed (%s/\*)" $KEYDIR
         return 1
      fi
      # The chown can only be done for user certificates
      # sdm_daemon certificate are owned by $ADMINUSER
      if [ $1 = "user" ]; then
         id $2  > /dev/null 2>&1
         if [ $? = 0 ]; then
            ExecChown -R $2 $KEYDIR
            if [ $? != 0 ]; then
               PrintError "chown to %s failed (%s)" $2 $KEYDIR
               return 1
            fi
         fi
      fi
   fi

   umask 022
   return 0
}


#--------------------------------------------------------------------------
# MakeCADirs
#    create all directories for CA infrastructure
#
# 
MakeCADirs()
{


   if [ -f $CATOP -o -f $CALOCALTOP ]; then
      $INFOTEXT "The CA directories\n   %s or %s\n seem to be regular files" \
            $CATOP $CALOCALTOP
      $INFOTEXT "CA initialization failed. Exit."
      exit 1
   fi

   ExecRm $CALOCALTOP 
   if [ -f $CALOCALTOP -o -d $CALOCALTOP ]; then
      PrintError "Can't delete the CA local directories\n   %s" \
                 $CALOCALTOP
      return 1
   fi

   ExecRmAsAdmin $CATOP 
   if [ -f $CATOP -o -d $CATOP ]; then
      PrintError "Can't delete the CA directories\n   %s" \
                 $CATOP 
      return 1
   fi


   $INFOTEXT "Creating %s" $CATOP
   ExecuteAsAdmin $MKDIR $CATOP
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" $CATOP
      return 1
   fi
   $INFOTEXT "Creating %s" $CALOCALTOP
   Execute $MKDIR -p $CALOCALTOP
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" $CALOCALTOP
      return 1
   fi

   if [ $ADMINUSER != default -a $rootinstalls = true ]; then
      ExecChown $ADMINUSER $CALOCALTOP
      if [ $? != 0 ]; then
         PrintError "chown to %s failed (%s)" $ADMINUSER $CALOCALTOP
         return 1
      fi
   fi

   $INFOTEXT "Creating %s" ${CATOP}/certs
   ExecuteAsAdmin $MKDIR ${CATOP}/certs
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" ${CATOP}/certs
      return 1
   fi

   $INFOTEXT "Creating %s" ${CATOP}/crl
   $INFOTEXT -log "Creating %s" ${CATOP}/crl
   ExecuteAsAdmin $MKDIR ${CATOP}/crl
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" ${CATOP}/crl
      return 1
   fi

   $INFOTEXT "Creating %s" ${CATOP}/newcerts
   $INFOTEXT -log "Creating %s" ${CATOP}/newcerts
   ExecuteAsAdmin $MKDIR ${CATOP}/newcerts
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" ${CATOP}/newcerts
      return 1
   fi

   $INFOTEXT "Creating %s" ${CATOP}/serial
   $INFOTEXT -log "Creating %s" ${CATOP}/serial
   # TruncCreateAndMakeWriteable ${CATOP}/serial
   ExecuteAsAdmin $TOUCH ${CATOP}/serial
   ExecuteAsAdmin $CHMOD 666 ${CATOP}/serial
   if [ $? != 0 ]; then
      PrintError "Could not touch file as %s (%s)" $ADMINUSER ${CATOP}/serial
      return 1
   fi
   
   echo 01 > ${CATOP}/serial
   ExecuteAsAdmin $CHMOD 644 ${CATOP}/serial
   if [ $? != 0 ]; then
      PrintError "chmod failed (%s)" ${CATOP}/serial
      return 1
   fi

   $INFOTEXT "Creating %s" ${CATOP}/index.txt
   $INFOTEXT -log "Creating %s" ${CATOP}/index.txt
   ExecuteAsAdmin $TOUCH ${CATOP}/index.txt   
   if [ $? != 0 ]; then
      PrintError "Could not touch file as %s (%s)" $ADMINUSER ${CATOP}/index.txt
      return 1
   fi

   $INFOTEXT "Creating %s" ${CATOP}/usercerts
   $INFOTEXT -log "Creating %s" ${CATOP}/usercerts
   ExecuteAsAdmin $MKDIR -m 755 -p ${CATOP}/usercerts
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" ${CATOP}/usercerts
      return 1
   fi

   $INFOTEXT "Creating %s" ${CALOCALTOP}/userkeys
   $INFOTEXT -log "Creating %s" ${CALOCALTOP}/userkeys
   ExecuteAsAdmin $MKDIR ${CALOCALTOP}/userkeys   
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" ${CALOCALTOP}/userkeys
      return 1
   fi

   if [ $SGE_CNF = false ]; then
      # haithabu store the daemon certificates in a seperate
      # daemons directory
      $INFOTEXT "Creating %s" ${CALOCALTOP}/daemons
      $INFOTEXT -log "Creating %s" ${CALOCALTOP}/daemons
      ExecuteAsAdmin $MKDIR ${CALOCALTOP}/daemons   
      if [ $? != 0 ]; then
         PrintError "mkdir failed (%s)" ${CATOP}/daemons
         return 1
      fi
   fi
   
   umask 077
   $INFOTEXT "Creating %s" ${CALOCALTOP}/private
   $INFOTEXT -log "Creating %s" ${CALOCALTOP}/private
   ExecuteAsAdmin $MKDIR ${CALOCALTOP}/private
   if [ $? != 0 ]; then
      PrintError "mkdir failed (%s)" ${CATOP}/private
      return 1
   fi
   umask 022

   $INFOTEXT -wait -auto $AUTO -n "\nHit <RETURN> to continue >> "
   $CLEAR

   return 0
}


#--------------------------------------------------------------------------
# ReadConfig
#    sources the sge_ca.conf file, if the -nosge option is not set
#
# 
ReadConfig() {
   
   i=0
   read_it=true
   while [ $# -gt 0 ]; do
     if [ "$1" = "-nosge" ]; then
        read_it=false
        break
     fi
     shift
   done
   if [ "$read_it" = "true" ]; then
      if [ -f  $ROOT_PATH/util/sgeCA/sge_ca.cnf ]; then
         . $ROOT_PATH/util/sgeCA/sge_ca.cnf
      fi
      return 1
   else
      return 0
   fi
}

#--------------------------------------------------------------------------
# THE MAIN PROCEDURE
#--------------------------------------------------------------------------
TOUCH=touch
RM=rm
MKDIR=mkdir
CHMOD=chmod
CHOWN=chown
CP=cp
MV=mv

umask 022

SGE_CNF=true
ROOT_PATH=`dirname $0`/../..
ROOT_PATH=`cd $ROOT_PATH; pwd`
CATOP=""
CALOCALTOP=""
CAHOST=""
CAHOMEKEYDIR=""

ADMINUSER="default"
CONFIG_DIR=$ROOT_PATH/util/sgeCA
ARCHSCRIPT=$ROOT_PATH/util/arch
if [ ! -f "$ARCHSCRIPT" ]; then
   echo
   echo Error: The shell script \"$ARCHSCRIPT\" does not exist.
   echo Please verify your setup and restart this script. Exit.
   echo
   exit 1
fi

ARCH=`$ARCHSCRIPT`
V5UTILBIN=$ROOT_PATH/utilbin/$ARCH              # adminrun, infotext, openssl, uidgid

if [ ! -d "$V5UTILBIN" ]; then
   echo
   echo "Error: The utilbin directory "$V5UTILBIN" does not exist"
   echo "Please verify your setup and restart this script. Exit."
   exit 1
fi

if [ ! -d "$ROOT_PATH/lib/$ARCH" ]; then
    echo
    echo "Error: The lib directory \"$ROOT_PATH/lib/$ARCH\" does not exist"
    echo "Please verify your setup and restart this script. Exit."
    exit 1
fi

if [ "$LD_LIBRARY_PATH"  = "" ]; then
   LD_LIBRARY_PATH=$ROOT_PATH/lib/$ARCH
else
   LD_LIBRARY_PATH="$ROOT_PATH/lib/${ARCH}:${LD_LIBRARY_PATH}"
fi
export LD_LIBRARY_PATH

#---------------------------------------
# setup INFOTEXT begin
#---------------------------------------

# INFOTXT_DUMMY is needed by message parsing script
# which is looking for $INFOTEXT and would report
# errors in the next command. Please use INFOTXT_DUMMY
# instead of using $INFOTEXT

INFOTXT_DUMMY=$V5UTILBIN/infotext
INFOTEXT=$INFOTXT_DUMMY
if [ ! -x $INFOTXT_DUMMY ]; then
   echo "Error: Can't find binary \"$INFOTXT_DUMMY\""
   echo "Please verify your setup and restart this script. Exit."
   exit 1
fi

# Test the infotext binary
tmp=`$INFOTEXT test 2>&1`
if [ $? -ne 0 ]; then
   echo "Error: Execution of $INFOTEXT failed: $tmp"
   echo "Please verify your setup and restart this script. Exit."
   exit 1
fi

#
# From now on we can use PrintError methods to write error messages
#

SGE_INFOTEXT_MAX_COLUMN=5000; export SGE_INFOTEXT_MAX_COLUMN

#---------------------------------------
# setup INFOTEXT end
#---------------------------------------

#
#  Check wether all needed binaries are exists
#
for i in adminrun openssl uidgid; do
   if [ ! -x $V5UTILBIN/$i ]; then
      PrintErrorAndExit 1 "Error: Can't find binary \"%s\"" $V5UTILBIN/$i
   fi
done

euid=`$V5UTILBIN/uidgid -euid 2>&1`
if [ $? -ne 0 ]; then
   PrintErrorAndExit 1 "Execution of $V5UTILBIN/uidgid failed: $euid"
fi
if [ $euid = 0 ]; then
   rootinstalls=true
else
   rootinstalls=false
fi

ReadConfig $*

#--------------------------------------------------------------------------
# SGE specific settings to keep previous behavior
#--------------------------------------------------------------------------

ME=`whoami`
if [ "$ME" = "" ]; then
   PrintErrorAndExit 1 "Can't determine your username with \"%s\" command. Exit" whoami
fi

CAKEY=cakey.pem
CACERT=cacert.pem
OPENSSL=$V5UTILBIN/openssl

AUTO="false"
#-----------------------------
# CommandLine Argument Parsing
#
WHICH="undef"
newkey=newkey.pem
newreq=newreq.pem
newcert=newcert.pem
user=""
outdir=.
indir=.
userfile=""
passinfile=""
pkcs12outdir=""
md="-md md5"
nodes="-nodes"
ksoutfile=""
kspwfile=""

ARGC=$#
while [ $ARGC != 0 ]; do
   case $1 in
   -adminuser)
      ADMINUSER="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -auto)
      AUTO="true"
      . $2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -init)
      WHICH="init"
      ;;
   -req)
      WHICH="req"
      ;;
   -sign)
      WHICH="sign"
      ;;
   -copy)
      WHICH="copy"
      ;;
   -nosge)
      SGE_CNF=false
      ;;
   -verify)
      if [ $ARGC -lt 2 ]; then
         PrintError "-verify needs argument"
         ErrUsage
      fi
      WHICH="verify"
      newcert=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -print)
      if [ $ARGC -lt 2 ]; then
         PrintError "-print needs argument"
         ErrUsage
      fi
      WHICH="print"
      newcert=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -showCaTop)
      WHICH="showCaTop"
      ;;
   -showCaLocalTop)
      WHICH="showCaLocalTop"
      ;;
   -printkey)
      if [ $ARGC -lt 2 ]; then
         PrintError "-printkey needs argument"
         ErrUsage
      fi
      WHICH="printkey"
      newcert=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -printcrl)
      if [ $ARGC -lt 2 ]; then
         PrintError "-printcrl needs argument"
         ErrUsage
      fi
      WHICH="printcrl"
      newcert=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -days)
      if [ $ARGC -lt 2 ]; then
         PrintError "-days needs argument"
         ErrUsage
      fi
      DAYS="-days $2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -outdir)
      if [ $ARGC -lt 2 ]; then
         PrintError "-outdir needs argument"
         ErrUsage
      fi
      outdir="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -cahost)
      if [ $ARGC -lt 2 ]; then
         PrintError "-cahost needs argument"
         ErrUsage
      fi
      CAHOST="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -cadir)
      if [ $ARGC -lt 2 ]; then
         PrintError "-cadir needs argument"
         ErrUsage
      fi
      CATOP="$2"
      CALOCALTOP="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -calocaltop)
      if [ $ARGC -lt 2 ]; then
         PrintError "-calocaltop needs argument"
         ErrUsage
      fi
      CALOCALTOP="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -catop)
      if [ $ARGC -lt 2 ]; then
         PrintError "-catop needs argument"
         ErrUsage
      fi
      CATOP="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -pkcs12)
      WHICH="pkcs12"
      if [ $ARGC -lt 2 ]; then
         PrintError "-pkcs12 needs argument"
         ErrUsage
      fi
      user="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -sdm_pkcs12)
      WHICH="sdm_pkcs12"
      if [ $ARGC -lt 2 ]; then
         PrintError "-sdm_pkcs12 needs argument"
         ErrUsage
      fi
      user="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -sys_pkcs12)
      WHICH="sys_pkcs12"
      if [ $ARGC -lt 2 ]; then
         PrintError "-sys_pkcs12 needs argument"
         ErrUsage
      fi
      user="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -ks)
      WHICH="ks"
      if [ $ARGC -lt 2 ]; then
         PrintError "-ks needs argument"
         ErrUsage
      fi
      user="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -ksout)   
      if [ $ARGC -lt 2 ]; then
         PrintError "-ksout needs argument"
         ErrUsage
      fi
      ksoutfile="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -kspwf)   
      if [ $ARGC -lt 2 ]; then
         PrintError "-kspwf needs argument"
         ErrUsage
      fi
      kspwfile="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -pkcs12pwf)   
      if [ $ARGC -lt 2 ]; then
         PrintError "-pkcs12pwf needs argument"
         ErrUsage
      fi
      passinfile="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -pkcs12dir)   
      if [ $ARGC -lt 2 ]; then
         PrintError "-pkcs12dir needs argument"
         ErrUsage
      fi
      pkcs12outdir="$2"
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -sha1)
      md="-md sha1"
      ;;
   -encryptkey)
      nodes=""
      ;;
   -usercert)
      WHICH="usercert"
      if [ $ARGC -lt 2 ]; then
         PrintError "-usercert needs argument"
         ErrUsage
      fi
      userfile=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -userks)
      WHICH="userks"
      ;;
   -sysks)
      WHICH="sysks"
      ;;
   -user)
      WHICH="oneuser"
      if [ $ARGC -lt 2 ]; then
         PrintError "-user needs argument"
         ErrUsage
      fi
      user=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -sdm_daemon)
      WHICH="sdm_daemon"
      if [ $ARGC -lt 2 ]; then
         PrintError "-sdm_daemon needs argument"
         ErrUsage
      fi
      user=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -renew)
      if [ $ARGC -lt 2 ]; then
         PrintError "-renew needs argument"
         ErrUsage
      fi
      WHICH="renew"
      user=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -renew_sdm)
      if [ $ARGC -lt 2 ]; then
         PrintError "-renew_sdm needs argument"
         ErrUsage
      fi
      WHICH="renew_sdm"
      user=$2
      shift
      ARGC=`expr $ARGC - 1`
      ;;
   -renew_sys)
      WHICH="renew_sys"
      ;;
   -renew_ca)
      WHICH="renew_ca"
      ;;
   -version)
      WHICH="version"
      ;;
   -dumpusers)
      WHICH="dumpusers"
      ;;
   *)
      PrintError "Unknown option %s" "$1"
      ErrUsage
      ;;
   esac
   shift
   ARGC=`expr $ARGC - 1`
done

if [ "$WHICH" = "undef" ]; then
   ErrUsage
fi

#echo "ADMINUSER: $ADMINUSER" 
#echo "CATOP: $CATOP" 
#echo "CALOCALTOP: $CALOCALTOP" 
#echo "CAHOST: $CAHOST" 

if [ "$CATOP" = "" ]; then
   ErrUsage "catop not set"
fi
if [ "$CALOCALTOP" = "" ]; then
   ErrUsage "calocaltop not set"
fi
if [ "$ADMINUSER" = "" ]; then
   ErrUsage "adminuser not set"
fi
if [ "$CAHOST" = "" ]; then
   ErrUsage "cahost not set"
fi


export ADMINUSER CATOP CALOCALTOP CAHOST

REQ="$OPENSSL req $nodes"

CA="$OPENSSL ca $md -keyfile $CALOCALTOP/private/$CAKEY -cert $CATOP/$CACERT \
             -outdir $CATOP/newcerts"

VERIFY="$OPENSSL verify"

X509="$OPENSSL x509"
X509KEY="$OPENSSL rsa"
X509CRL="$OPENSSL crl"

P12="$OPENSSL pkcs12"

case $WHICH in
init)
   InitCA  
   ;;
req)
   RequestCert
   ;;
sign)
   SignCert
    ;;
copy) 
    InstallKey user $ME
    ;;
usercert) 
    MakeUserCerts $userfile
    ;;
userks) 
    MakeUserKeystores
    ;;
sysks) 
    MakeSysKeystore
    ;;
oneuser)
    MakeUserCert user "$user"
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
sdm_daemon)
    MakeUserCert sdm_daemon $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
verify)
    VerifyCert
    ;;
print)
    PrintX509 cert $newcert
    ;;
printkey) 
    PrintX509 key $newcert
    ;;
printcrl) 
    PrintX509 crl $newcert
    ;;
renew) 
    RenewCert user $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
renew_sdm) 
    RenewCert sdm_daemon $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
renew_sys) 
    RenewCert daemon $ADMINUSER
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
renew_ca) 
    RenewCA
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
pkcs12) 
    MakePKCS12 user $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
ks) 
    MakeKeystore user $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
sdm_pkcs12) 
    MakePKCS12 sdm_daemon $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
sys_pkcs12) 
    MakePKCS12 sge_daemon $user
    if [ $? != 0 ]; then
       exit 1
    fi
    ;;
showCaTop)
    echo "$CATOP"
    ;;
showCaLocalTop)
    echo "$CALOCALTOP"
    ;;
version)
    echo "sge_ca 6.5"
    ;;
dumpusers)
    DumpUsers
    ;;
help)
    ErrUsage
    ;;
esac

exit 0