3
* Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
4
* Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
5
* Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
7
* See file CREDITS for list of people who contributed to this
10
* This program is free software; you can redistribute it and/or
11
* modify it under the terms of the GNU General Public License as
12
* published by the Free Software Foundation; either version 2 of
13
* the License, or (at your option) any later version.
15
* This program is distributed in the hope that it will be useful,
16
* but WITHOUT ANY WARRANTY; without even the implied warranty of
17
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18
* GNU General Public License for more details.
20
* You should have received a copy of the GNU General Public License
21
* along with this program; if not, write to the Free Software
22
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
28
#include <asm/arch/pxa-regs.h>
31
DECLARE_GLOBAL_DATA_PTR;
33
#ifdef CONFIG_SHOW_BOOT_PROGRESS
34
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
36
# define SHOW_BOOT_PROGRESS(arg)
40
* misc_init_r: - misc initialisation routines
48
/* determine if the software update key is pressed during startup */
49
/* not ported yet... */
50
if (GPLR0 & 0x00000800) {
51
printf("using bootcmd_normal (sw-update button not pressed)\n");
52
str = getenv("bootcmd_normal");
54
printf("using bootcmd_update (sw-update button pressed)\n");
55
str = getenv("bootcmd_update");
58
setenv("bootcmd",str);
65
* board_init: - setup some data structures
67
* @return: 0 in case of success
72
/* We have RAM, disable cache */
76
/* arch number of CSB226 board */
77
gd->bd->bi_arch_number = MACH_TYPE_CSB226;
79
/* adress of boot parameters */
80
gd->bd->bi_boot_params = 0xa0000100;
86
extern void pxa_dram_init(void);
90
gd->ram_size = PHYS_SDRAM_1_SIZE;
94
void dram_init_banksize(void)
96
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
97
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
101
* csb226_set_led: - switch LEDs on or off
103
* @param led: LED to switch (0,1,2)
104
* @param state: switch on (1) or off (0)
107
void csb226_set_led(int led, int state)
111
case 0: if (state==1) {
112
writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0);
113
} else if (state==0) {
114
writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0);
118
case 1: if (state==1) {
119
writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0);
120
} else if (state==0) {
121
writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0);
125
case 2: if (state==1) {
126
writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0);
127
} else if (state==0) {
128
writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0);
138
* show_boot_progress: - indicate state of the boot process
140
* @param status: Status number - see README for details.
142
* The CSB226 does only have 3 LEDs, so we switch them on at the most
143
* important states (1, 5, 15).
146
void show_boot_progress (int status)
149
case 1: csb226_set_led(0,1); break;
150
case 5: csb226_set_led(1,1); break;
151
case 15: csb226_set_led(2,1); break;
157
#ifdef CONFIG_CMD_NET
158
int board_eth_init(bd_t *bis)
162
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);