~vcs-imports/backupninja/trunk

                                          |\_
                 B A C K U P N I N J A   /()/
                                         `\|
                         
      a silent flower blossom death strike to lost data.

Backupninja allows you to coordinate system backup by dropping a few
simple configuration files into /etc/backup.d/. Most programs you
might use for making backups don't have their own configuration file
format. Backupninja provides a centralized way to configure and
coordinate many different backup utilities. 

Features:
 - easy to read ini style configuration files.
 - you can drop in scripts to handle new types of backups.
 - backup actions can be scheduled
 - you can choose when status report emails are mailed to you
   (always, on warning, on error, never).
 - console-based wizard (ninjahelper) makes it easy to create
   backup action configuration files.
 - passwords are never sent via the command line to helper programs.
 - works with Linux-Vservers (http://linux-vserver.org/)
 
Backup types:
 - secure, remote, incremental filesytem backup (via rdiff-backup).
   incremental data is compressed. permissions are retained even
   with an unpriviledged backup user.
 - backup of mysql databases (via mysqlhotcopy and mysqldump).
 - backup of ldap databases (via slapcat and ldapsearch).
 - basic system and hardware info
 - encrypted remote backups (via duplicity).    
 - backup of subversion repositories.

The following options are available:
-h, --help           This usage message
-d, --debug          Run in debug mode, where all log messages are
                     output to the current shell.
-f, --conffile FILE  Use FILE for the main configuration instead
                     of /etc/backupninja.conf
-t, --test           Test run mode. This will test if the backup could run, without actually
                     preforming any backups. For example, it will attempt to authenticate
                     or test that ssh keys are set correctly.
-n, --now            Perform actions now, instead of when they might be scheduled.
                     No output will be created unless also run with -d.
--run FILE           Runs the specified action FILE (e.g. one of the /etc/backup.d/ files).
                     Also puts backupninja in debug mode.

CONFIGURATION FILES
===================

The general configuration file is /etc/backupninja.conf. In this file
you can set the log level and change the default directory locations.
You can force a different general configuration file with "backupninja
-f /path/to/conf".

To preform the actual backup, backupninja processes each configuration
file in /etc/backup.d according to the file's suffix:
 
  .sh      --  run this file as a shell script.
  .rdiff   --  filesystem backup (using rdiff-backup)
  .dup     --  filesystem backup (using duplicity)
  .mysql   --  backup mysql databases
  .ldap    --  backup ldap databases
  .pgsql   --  backup PostgreSQL databases
  .sys     --  general hardware, partition, and system reports.
  .svn     --  backup subversion repositories
  .maildir --  incrementally backup maildirs (very specialized)

Support for additional configuration types can be added by dropping
bash scripts with the name of the suffix into /usr/share/backupninja. 

The configuration files are processed in alphabetical order. However,
it is suggested that you name the config files in "sysvinit style." 

For example:
	00-disabled.ldap
	10-runthisfirst.sh
	20-runthisnext.mysql
	90-runthislast.rdiff

Typically, you will put a '.rdiff' config file last, so that any
database dumps you make are included in the filesystem backup.
Configurations files with names beginning with 0 (zero) or ending with
.disabled (preferred method) are skipped.

Unless otherwise specified, the config file format is "ini style."

For example:

   # this is a comment
   
   [fishes]
   fish = red
   fish = blue

   [fruit]
   apple = yes
   pear = no thanks \
   i will not have a pear.


SCHEDULING
==========

By default, each configuration file is processed everyday at 01:00 (1
AM). This can be changed by specifying the 'when' option in a config
file.

For example:

  when = sundays at 02:00
  when = 30th at 22
  when = 30 at 22:00
  when = everyday at 01            <-- the default
  when = Tuesday at 05:00

A configuration file will be processed at the time(s) specified by the
"when" option. If multiple "when" options are present, then they all
apply. If two configurations files are scheduled to run in the same
hour, then we fall back on the alphabetical ordering specified above.
If two configurations files are scheduled close to one another in
time, it is possible to have multiple copies of backupninja running if
the first instance is not finished before the next one starts.

Make sure that you put the "when" option before any sections in your
configuration file.

These values for 'when' are equivalent:

  when = tuesday at 05:30
  when = TUESDAYS at 05

These values for 'when' are invalid:
  
  when = tuesday at 2am
  when = tuesday at 2
  when = tues at 02


REAL WORLD USAGE
================

Backupninja can be used to implement whatever backup strategy you
choose. It is intended, however, to be used like so:

(1) First, databases are safely copied or exported to /var/backups.
    Typically, you cannot make a file backup of a database while it
    is in use, hence the need to use special tools to make a safe copy
    or export into /var/backups.
     
(2) Then, vital parts of the file system, including /var/backups, are
    nightly pushed to a remote, off-site, hard disk (using
    rdiff-backup). The local user is root, but the remote user is not
    priviledged. Hopefully, the remote filesystem is encrypted. 

There are many different backup strategies out there, including "pull
style", magnetic tape, rsync + hard links, etc. We believe that the
strategy outlined above is the way to go because: (1) hard disks are
very cheap these days, (2) pull style backups are no good, because then
the backup server must have root on the production server, and (3)
rdiff-backup is more space efficient and featureful than using rsync +
hard links. 


SSH KEYS
========

In order for rdiff-backup to sync files over ssh unattended, you must
create ssh keys on the source server and copy the public key to the
remote user's authorized keys file. For example:

  root@srchost# ssh-keygen -t dsa
  root@srchost# ssh-copy-id -i /root/.ssh/id_dsa.pub backup@desthost 

Now, you should be able to ssh from user 'root' on srchost to
user 'backup' on desthost without specifying a password.

Note: when prompted for a password by ssh-keygen, just leave it
blank by hitting return.

The included helper program "ninjahelper" will walk you through creating
an rdiff-backup configuration, and will set up the ssh keys for you.

INSTALLATION
============
   
Requirements:
  apt-get install bash gawk

Recommended: 
  apt-get install rdiff-backup gzip hwinfo

Files:
  /usr/sbin/backupninja        -- main script
  /etc/cron.d/backupninja      -- runs main script nightly
  /etc/logrotate.d/backupninja -- rotates backupninja.log
  /etc/backup.d/               -- directory for configuration files
  /etc/backupninja.conf        -- general options 
  /usr/share/backupninja       -- handler scripts which do the actual work

Installation:
  There is no install script, but you just need to move files to the
  correct locations. All files should be owned by root.
 
  # tar xvzf backupninja.tar.gz
  # cd backupninja
  # mv backupninja /usr/sbin/backupninja
  # mv ninjahelper /usr/sbin/ninjahelper
  # mv etc/logrotate.d/backupninja /etc/logrotate.d/backupninja
  # mv etc/cron.d/backupninja /etc/cron.d/backupninja
  # mkdir /etc/backup.d/
  # mv etc/backupninja.conf /etc/backupninja.conf
  # mv handlers /usr/share/backupninja


VSERVERS
========

If you are using Linux-Vservers (http://linux-vserver.org/) there are some
special capabilities that different handlers have to make vserver 
backups easier.

Set the variable "vservers" to be "yes" in /etc/backupninja.conf and see the
example configuration files for each handler to configure the vserver specific
variables.

Additional vserver variables that can be configured in /etc/backupninja.conf, 
but they probably don't need to be changed:

VSERVERINFO (default: /usr/sbin/vserver-info)
VSERVER (default: /usr/sbin/vserver)
VROOTDIR (default: `$VSERVERINFO info SYSINFO |grep vserver-Rootdir | awk '{print $2}'`)

NINJAHELPER
===========

Ninjahelper is an additional script which will walk you through the process of
configuring backupninja. Ninjahelper has a menu driven curses based interface
(using dialog). 

To add an additional 'wizard' to ninjahelper, follow these steps:

(1) to add a helper for the handler "blue", create the file
    blue.helper in the directory where the handlers live.
    (ie /usr/share/backupninja).

(2) next, you need to add your helper to the global HELPERS variable
    and define the main function for your helper (the function name
    is always <helper>_wizard). for example, blue.helper:
       HELPERS="$HELPERS blue:description_of_this_helper"
       blue_wizard() {
         ... do work here ...
       }

(3) look at the existing helpers to see how they are written. Try to re-use
    functions, such as the dialog functions that are defined in easydialog.sh,
    or the vserver functions defined in lib/vserver.

(4) test, re-test, and test again. Try to break the helper by going backwards,
    try to think like someone who has no idea how to configure your handler
    would think, try to make your helper as simple as possible. Walk like a cat,
    become your shadow, don't let your senses betray you.