134
134
Following the first line are a number of other possibilities:
136
> bindport = <portnum>
138
This sets the port that IAX will bind to. The default IAX port number is
139
5036. It is recommended that this value not be altered in general.
138
This sets the port that IAX will bind to. The default IAX version 1
139
port number is 5036. For IAX version 2, that is now the default in
140
Asterisk, the default port is 4569.
141
It is recommended that this value not be altered in general.
141
143
> bindaddr = <ipaddr>
171
173
These parameters control the operation of the jitter buffer. The
172
174
jitterbuffer should always be enabled unless you expect all your
173
connections to be over a LAN. The drop count is the maximum number of
174
voice packets to allow to drop (out of 100). Useful values are 3-10. The
175
maxjitterbuffer is the maximum amount of jitter buffer to permit to be
176
used. The "maxexcessbuffer" is the maximum amount of excess jitter buffer
177
that is permitted before the jitter buffer is slowly shrunk to eliminate
175
connections to be over a LAN.
176
* drop count is the maximum number of voice packets to allow to drop
177
(out of 100). Useful values are 3-10.
178
* maxjitterbuffer is the maximum amount of jitter buffer to permit to be
180
* maxexcessbuffer is the maximum amount of excess jitter buffer
181
that is permitted before the jitter buffer is slowly shrunk to eliminate
183
* minexcessbuffer is the minimum amout of excess jitter buffer
180
185
> accountcode = <code>
181
186
> amaflags = [default|omit|billing|documentation]
208
213
identify ourselves as. A secret may be provided as well. The secret is
209
214
generally a shared password between the local server and the remote
210
215
server. However, if the secret is in square brackets ([]'s) then it is
211
interpreted as the name of a key to use. In that case, the local Asterisk
216
interpreted as the name of a RSA key to use. In that case, the local Asterisk
212
217
server must have the *private* key (/var/lib/asterisk/keys/<name>.key) and
213
218
the remote server will have to have the corresponding public key.
215
220
The "host" is a required field and is the hostname or IP address of the
216
221
remote Asterisk server. The port specification is optional and is by
217
default 5036 if not specified.
222
default 4569 for iax2 if not specified.
224
> notransfer = yes | no
226
If an IAX phone calls another IAX phone by using a Asterisk server,
227
Asterisk will transfer the call to go peer to peer. If you do not
228
want this, turn on notransfer with a "yes". This is also settable
232
244
> type = [user|peer|friend]
234
246
This line tells Asterisk how to interpret this entity. Users are things
235
that connect to us, while peers are people we connect to, and a friend is
247
that connect to us, while peers are phones we connect to, and a friend is
236
248
shorthand for creating a user and a peer with identical information
262
274
would deny anyone in 192.168.0.0 with a netmask of 24 bits (class C),
265
> deny = 192.168.0.0/255.255.255.0
266
> permit = 0.0.0.0/0.0.0.0
277
> deny = 192.168.0.0/24
268
280
would not deny anyone since the final rule would permit anyone, thus
269
281
overriding the denial.
282
294
You may select which authentication methods are permitted to be used by
283
295
the user to authenticate to us. Multiple methods may be specified,
284
separated by commas. If md5 or plaintext authentication is selected, a
285
secret must be provided. If RSA authentication is specified, then one or
296
separated by commas. If md5 or plaintext authentication is selected, a
297
secret must be provided. If RSA authentication is specified, then one or
286
298
more key names must be specified with "inkeys"
288
300
If no secret is specified and no authentication method is specified, then
323
335
default IP address to use when dynamic registration has not been performed
324
336
or has timed out.
338
> peercontext = <context>
340
Specifies the context name to be passed to the peer for it to use when routing
341
the call through its dial plan. This entry will be used only if a context
342
is not included in the IAX2 channel name passed to the Dial command.
344
> qualify = [yes | no | <value>]
346
Qualify turns on checking of availability of the remote peer. If the
347
peer becomes unavailable, no calls are placed to the peer until
348
it is reachable again. This is also helpful in certain NAT situations.
350
> jitterbuffer = [yes | no]
352
Turns on or off the jitterbuffer for this peer
354
> mailbox = <mailbox>[@mailboxcontext]
356
Specifies a mailbox to check for voicemail notification.
358
> permit = <ipaddr>/<netmask>
359
> deny = <ipaddr>/<netmask>
361
Permit and deny rules may be applied to users, allowing them to connect
362
from certain IP addresses and not others. The permit and deny rules are
363
interpreted in sequence and all are evaluated on a given IP address, with
364
the final result being the decision. See the user section above
367
----------------------------------------------------------------------
368
For more examples of a configuration, please see the iax.conf.sample in
369
your the /configs directory of you source code distribution
added
removed
doc/README.iax
