1
Program Version,EnergyPlus-Windows-64 8.0.0.007, YMD=2013.05.09 19:03,IDD_Version 8.0.0.007
2
** Warning ** Output:PreprocessorMessage="ExpandObjects" has the following Warning conditions:
3
** ~~~ ** Warning: In HVACTemplate:System:VAV "Central VAV" the Heating Coil Design
4
** ~~~ ** Setpoint is greater than the Preheat Coil Design Setpoint
5
** ~~~ ** but Heating Coil
6
** ~~~ ** Type=None. Using Preheat Coil Design Setpoint for the Sizing:System Central
7
** ~~~ ** Heating Design Supply Air Temperature.
8
** Warning ** Output:PreprocessorMessage="ExpandObjects" has the following Warning conditions:
9
** ~~~ ** Warning: In HVACTemplate:System:VAV "Central VAV" there is no Heating Coil
10
** ~~~ ** and no Preheat Coil. The Preheat Coil Design Setpoint will be used for the
11
** ~~~ ** Sizing:System Central Heating Design Supply Air Temperature. This will be
12
** ~~~ ** the inlet air temperature for sizing reheat coils.
13
************* Beginning Zone Sizing Calculations
14
************* Beginning System Sizing Calculations
15
************* Beginning Plant Sizing Calculations
16
************* Testing Individual Branch Integrity
17
************* All Branches passed integrity testing
18
************* Testing Individual Supply Air Path Integrity
19
************* All Supply Air Paths passed integrity testing
20
************* Testing Individual Return Air Path Integrity
21
************* All Return Air Paths passed integrity testing
22
************* No node connection errors were found.
23
************* Beginning Simulation
24
************* Simulation Error Summary *************
25
************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
26
************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
27
************* EnergyPlus Completed Successfully-- 2 Warning; 0 Severe Errors; Elapsed Time=00hr 00min 6.38sec