2
<dt>Boot up the PREVIOUS RELEASE of FAMILY iso using a CD/DVD or USB Key to a Live Session -- alternatively, skip the install steps and start the upgrade step below(step ~17) by booting a pre-existing installation</dt>
3
<dd>The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons</dd>
4
<dt>Click on the Install FAMILY icon</dt>
5
<dd>The 'Preparing to install FAMILY' screen is displayed</dd>
6
<dt>On the screen Preparing to install FAMILY, note the state of each check mark for the following components
8
<li>Your system have at least the amount a space indicated</li>
9
<li>(If on a 'laptop'). Is plugged to a power source</li>
10
<li>Is connected to the Internet</li>
13
<dd>Check marks represent the state of your system accurately</dd>
14
<dt>Click on the continue button</dt>
15
<dd>The 'Installation type' screen is displayed</dd>
16
<dt>Select 'Erase disk and install FAMILY' </dt>
17
<dt>Click on the Install now button</dt>
18
<dd> Then, the 'Where are you?' screen is displayed</dd>
19
<dt>If your system is connected to the network, note the preselected timezone correspond with your timezone and the city indicated in the text box </dt>
20
<dd>The timezone and city displayed match your timezone and a city from your area</dd>
21
<dt>Click on the continue button</dt>
22
<dd>The 'Keyboard Layout' screen appears</dd>
23
<dd>The proposed keyboard corresponds to your keyboard</dd>
24
<dt>Click on continue</dt>
25
<dd>The 'Who are you?' screen appears</dd>
26
<dt>Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)</dt>
27
<dd>Name, username and password are accepted. Additionally, the continue button is enabled</dd>
28
<dt>Click on the continue button</dt>
29
<dd>The 'Welcome to FAMILY ' slide is displayed</dd>
30
<dt>Wait for the installer to finish</dt>
31
<dd>An 'Installation Complete' dialog appears</dd>
32
<dt>Click the Restart now button</dt>
33
<dd>GUI is shut down, a prompt to remove media and press Enter appears</dd>
34
<dt>Remove the disc and press enter</dt>
35
<dd>The machine has been rebooted</dd>
36
<dt>Allow the machine to reboot</dt>
37
<dd>The system boots properly and loads into FAMILY</dd>
38
<dt>Login as the user you created, or ensure that you are auto-logged in as the user created during setup if you checked the auto-login option</dt>
39
<dd>The new user's desktop is presented</dd>
40
<dt>Reboot using the iso (the one downloaded from the 'Link to the download information' at the beginning of this testcase) with a CD/DVD or USB Key to a Live Session to perform an upgrade of FAMILY</dt>
41
<dd>The system boots properly and loads the installer displaying Welcome dialog with language selection and 'Try FAMILY' and 'Install FAMILY' buttons</dd>
42
<dt>Click on the Install FAMILY icon</dt>
43
<dd>The 'Preparing to install FAMILY' screen is displayed</dd>
44
<dt>On the screen Preparing to install FAMILY, note the state of each check mark for the following components
46
<li>Your system have at least the amount a space indicated</li>
47
<li>(If on a 'laptop'). Is plugged to a power source</li>
48
<li>Is connected to the Internet</li>
51
<dd>Check marks represent the state of your system accurately</dd>
52
<dt>Click on the Install now button</dt>
53
<dd>The 'Installation type' screen is displayed</dd>
54
<dt>Select 'Upgrade FAMILY 'previous release' to FAMILY 'current release'</dt>
55
<dt>Click on the continue button</dt>
56
<dt>If your system is connected to the network, note the preselected timezone corresponds with your timezone and the city indicated in the text box </dt>
57
<dd>The timezone and city displayed match your timezone and a city from your area</dd>
58
<dt>Click on the continue button</dt>
59
<dd>The 'Keyboard Layout' screen appears</dd>
60
<dt>Note the Keyboard layout and variant, and type some characters in the test area</dt>
61
<dt>Click on continue</dt>
62
<dd>The 'Who are you?' screen appears</dd>
63
<dt>Input your initial user details and password (Note admin can not be used - it is a dedicated Linux User)</dt>
64
<dd>Name, username and password are accepted. Additionally, the continue button is enabled</dd>
65
<dt>Click on the continue button</dt>
66
<dd>The 'Welcome to FAMILY ' slide is displayed</dd>
67
<dt>Wait for the installation to proceed and the slide to change automatically</dt>
68
<dd>The slideshow appears correct, the installer displays installation details along the bottom and the slideshow changes slides</dd>
69
<dt>Wait for the installer to finish</dt>
70
<dd>An 'Installation Complete' dialog appears</dd>
71
<dt>Click the Restart now button</dt>
72
<dd>GUI is shut down, a prompt to remove media and press Enter appears</dd>
73
<dt>Remove the disc and press enter</dt>
74
<dd>The machine has been rebooted</dd>
75
<dt>Allow the machine to reboot</dt>
76
<dd>The system boots properly and loads into FAMILY</dd>
77
<dt>Login as the user you created, or ensure that you are auto-logged in as the user created during setup if you checked the auto-login option</dt>
78
<dd>The user's desktop is presented</dd>
79
<dt>Open the Terminal pressing CTRL+ALT+T type "lsb_release -r" without the quotes and verify that FAMILY upgraded to the latest release</dt>
80
<dd>You should verify the system upgraded correclty to the latest FAMILY release testing that the default applications installed work correclty</dd>
83
<p><strong>If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.<br />
84
If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result.</strong></p>
b'\\ No newline at end of file'
added
removed
testcases/image/1468_Install (upgrade)
