1
# Configure paths for GLIB
4
dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
5
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
6
dnl gthread is specified in MODULES, pass to glib-config
8
AC_DEFUN([AM_PATH_GLIB],
10
dnl Get the cflags and libraries from the glib-config script
12
AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)],
13
glib_config_prefix="$withval", glib_config_prefix="")
14
AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
15
glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
16
AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program],
17
, enable_glibtest=yes)
19
if test x$glib_config_exec_prefix != x ; then
20
glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
21
if test x${GLIB_CONFIG+set} != xset ; then
22
GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
25
if test x$glib_config_prefix != x ; then
26
glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
27
if test x${GLIB_CONFIG+set} != xset ; then
28
GLIB_CONFIG=$glib_config_prefix/bin/glib-config
36
glib_config_args="$glib_config_args gmodule"
39
glib_config_args="$glib_config_args gthread"
44
AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
45
min_glib_version=ifelse([$1], ,0.99.7,$1)
46
AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
48
if test "$GLIB_CONFIG" = "no" ; then
51
GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
52
GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
53
glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
54
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
55
glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
56
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
57
glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
58
sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
59
if test "x$enable_glibtest" = "xyes" ; then
60
ac_save_CFLAGS="$CFLAGS"
62
CFLAGS="$CFLAGS $GLIB_CFLAGS"
63
LIBS="$GLIB_LIBS $LIBS"
65
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
66
dnl checks the results of glib-config to some extent
77
int major, minor, micro;
80
system ("touch conf.glibtest");
82
/* HP/UX 9 (%@#!) writes to sscanf strings */
83
tmp_version = g_strdup("$min_glib_version");
84
if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
85
printf("%s, bad version string\n", "$min_glib_version");
89
if ((glib_major_version != $glib_config_major_version) ||
90
(glib_minor_version != $glib_config_minor_version) ||
91
(glib_micro_version != $glib_config_micro_version))
93
printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
94
$glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
95
glib_major_version, glib_minor_version, glib_micro_version);
96
printf ("*** was found! If glib-config was correct, then it is best\n");
97
printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
98
printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
99
printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
100
printf("*** required on your system.\n");
101
printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
102
printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
103
printf("*** before re-running configure\n");
105
else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
106
(glib_minor_version != GLIB_MINOR_VERSION) ||
107
(glib_micro_version != GLIB_MICRO_VERSION))
109
printf("*** GLIB header files (version %d.%d.%d) do not match\n",
110
GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
111
printf("*** library (version %d.%d.%d)\n",
112
glib_major_version, glib_minor_version, glib_micro_version);
116
if ((glib_major_version > major) ||
117
((glib_major_version == major) && (glib_minor_version > minor)) ||
118
((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
124
printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
125
glib_major_version, glib_minor_version, glib_micro_version);
126
printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
127
major, minor, micro);
128
printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
130
printf("*** If you have already installed a sufficiently new version, this error\n");
131
printf("*** probably means that the wrong copy of the glib-config shell script is\n");
132
printf("*** being found. The easiest way to fix this is to remove the old version\n");
133
printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
134
printf("*** correct copy of glib-config. (In this case, you will have to\n");
135
printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
136
printf("*** so that the correct libraries are found at run-time))\n");
141
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
142
CFLAGS="$ac_save_CFLAGS"
146
if test "x$no_glib" = x ; then
148
ifelse([$2], , :, [$2])
151
if test "$GLIB_CONFIG" = "no" ; then
152
echo "*** The glib-config script installed by GLIB could not be found"
153
echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
154
echo "*** your path, or set the GLIB_CONFIG environment variable to the"
155
echo "*** full path to glib-config."
157
if test -f conf.glibtest ; then
160
echo "*** Could not run GLIB test program, checking why..."
161
CFLAGS="$CFLAGS $GLIB_CFLAGS"
162
LIBS="$LIBS $GLIB_LIBS"
166
], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
167
[ echo "*** The test program compiled, but did not run. This usually means"
168
echo "*** that the run-time linker is not finding GLIB or finding the wrong"
169
echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
170
echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
171
echo "*** to the installed location Also, make sure you have run ldconfig if that"
172
echo "*** is required on your system"
174
echo "*** If you have an old version installed, it is best to remove it, although"
175
echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
177
echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
178
echo "*** came with the system with the command"
180
echo "*** rpm --erase --nodeps gtk gtk-devel" ],
181
[ echo "*** The test program failed to compile or link. See the file config.log for the"
182
echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
183
echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
184
echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
185
CFLAGS="$ac_save_CFLAGS"
191
ifelse([$3], , :, [$3])
193
AC_SUBST(GLIB_CFLAGS)
added
removed
m4/glib.m4
