1
# /etc/inittab init(8) configuration for BusyBox
3
# Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
6
# Note, BusyBox init doesn't support runlevels. The runlevels field is
7
# completely ignored by BusyBox init. If you want runlevels, use sysvinit.
10
# Format for each entry: <id>:<runlevels>:<action>:<process>
12
# <id>: WARNING: This field has a non-traditional meaning for BusyBox init!
14
# The id field is used by BusyBox init to specify the controlling tty for
15
# the specified process to run on. The contents of this field are
16
# appended to "/dev/" and used as-is. There is no need for this field to
17
# be unique, although if it isn't you may have strange results. If this
18
# field is left blank, then the init's stdin/out will be used.
20
# <runlevels>: The runlevels field is completely ignored.
22
# <action>: Valid actions include: sysinit, respawn, askfirst, wait, once,
23
# restart, ctrlaltdel, and shutdown.
25
# Note: askfirst acts just like respawn, but before running the specified
26
# process it displays the line "Please press Enter to activate this
27
# console." and then waits for the user to press enter before starting
28
# the specified process.
30
# Note: unrecognized actions (like initdefault) will cause init to emit
31
# an error message, and then go along with its business.
33
# <process>: Specifies the process to be executed and it's command line.
35
# Note: BusyBox init works just fine without an inittab. If no inittab is
36
# found, it has the following default behavior:
37
# ::sysinit:/etc/init.d/rcS
39
# ::ctrlaltdel:/sbin/reboot
40
# ::shutdown:/sbin/swapoff -a
41
# ::shutdown:/bin/umount -a -r
42
# ::restart:/sbin/init
43
# tty2::askfirst:/bin/sh
44
# tty3::askfirst:/bin/sh
45
# tty4::askfirst:/bin/sh
47
# Boot-time system configuration/initialization script.
48
# This is run first except when booting in single-user mode.
50
::sysinit:/etc/init.d/rcS
52
# /bin/sh invocations on selected ttys
54
# Note below that we prefix the shell commands with a "-" to indicate to the
55
# shell that it is supposed to be a login shell. Normally this is handled by
56
# login, but since we are bypassing login in this case, BusyBox lets you do
59
# Start an "askfirst" shell on the console (whatever that may be)
61
# Start an "askfirst" shell on /dev/tty2-4
62
tty2::askfirst:-/bin/sh
63
tty3::askfirst:-/bin/sh
64
tty4::askfirst:-/bin/sh
66
# /sbin/getty invocations for selected ttys
67
tty4::respawn:/sbin/getty 38400 tty5
68
tty5::respawn:/sbin/getty 38400 tty6
70
# Example of how to put a getty on a serial line (for a terminal)
71
#::respawn:/sbin/getty -L ttyS0 9600 vt100
72
#::respawn:/sbin/getty -L ttyS1 9600 vt100
74
# Example how to put a getty on a modem line.
75
#::respawn:/sbin/getty 57600 ttyS2
77
# Stuff to do when restarting the init process
80
# Stuff to do before rebooting
81
::ctrlaltdel:/sbin/reboot
82
::shutdown:/bin/umount -a -r
83
::shutdown:/sbin/swapoff -a