1
# Sample udhcpd configuration file (/etc/udhcpd.conf)
3
# The start and end of the IP lease block
5
start 192.168.0.20 #default: 192.168.0.20
6
end 192.168.0.254 #default: 192.168.0.254
9
# The interface that udhcpd will use
11
interface eth0 #default: eth0
14
# The maximim number of leases (includes addressesd reserved
15
# by OFFER's, DECLINE's, and ARP conficts
17
#max_leases 254 #default: 254
20
# If remaining is true (default), udhcpd will store the time
21
# remaining for each lease in the udhcpd leases file. This is
22
# for embedded systems that cannot keep time between reboots.
23
# If you set remaining to no, the absolute time that the lease
24
# expires at will be stored in the dhcpd.leases file.
26
#remaining yes #default: yes
29
# The time period at which udhcpd will write out a dhcpd.leases
30
# file. If this is 0, udhcpd will never automatically write a
31
# lease file. (specified in seconds)
33
#auto_time 7200 #default: 7200 (2 hours)
36
# The amount of time that an IP will be reserved (leased) for if a
37
# DHCP decline message is received (seconds).
39
#decline_time 3600 #default: 3600 (1 hour)
42
# The amount of time that an IP will be reserved (leased) for if an
43
# ARP conflct occurs. (seconds
45
#conflict_time 3600 #default: 3600 (1 hour)
48
# How long an offered address is reserved (leased) in seconds
50
#offer_time 60 #default: 60 (1 minute)
52
# If a lease to be given is below this value, the full lease time is
53
# instead used (seconds).
55
#min_lease 60 #defult: 60
58
# The location of the leases file
60
#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
62
# The location of the pid file
63
#pidfile /var/run/udhcpd.pid #default: /var/run/udhcpd.pid
65
# Everytime udhcpd writes a leases file, the below script will be called.
66
# Useful for writing the lease file to flash every few hours.
68
#notify_file #default: (no script)
70
#notify_file dumpleases # <--- useful for debugging
72
# The following are bootp specific options, setable by udhcpd.
74
#siaddr 192.168.0.22 #default: 0.0.0.0
76
#sname zorak #default: (none)
78
#boot_file /var/nfs_root #default: (none)
80
# The remainer of options are DHCP options and can be specifed with the
81
# keyword 'opt' or 'option'. If an option can take multiple items, such
82
# as the dns option, they can be listed on the same line, or multiple
83
# lines. The only option with a default is 'lease'.
86
opt dns 192.168.10.2 192.168.10.10
87
option subnet 255.255.255.0
88
opt router 192.168.10.2
89
opt wins 192.168.10.10
90
option dns 129.219.13.81 # appened to above DNS servers for a total of 3
92
option lease 864000 # 10 days of seconds
95
# Currently supported options, for more info, see options.c
120
#static_lease 00:60:08:11:CE:4E 192.168.0.54
121
#static_lease 00:60:08:11:CE:3E 192.168.0.44