1
# -----------------------------
2
# PostgreSQL configuration file
3
# -----------------------------
5
# This file consists of lines of the form:
9
# (The "=" is optional.) Whitespace may be used. Comments are introduced with
10
# "#" anywhere on a line. The complete list of parameter names and allowed
11
# values can be found in the PostgreSQL documentation.
13
# The commented-out settings shown in this file represent the default values.
14
# Re-commenting a setting is NOT sufficient to revert it to the default value;
15
# you need to reload the server.
17
# This file is read on server startup and when the server receives a SIGHUP
18
# signal. If you edit the file on a running system, you have to SIGHUP the
19
# server for the changes to take effect, or use "pg_ctl reload". Some
20
# parameters, which are marked below, require a server shutdown and restart to
23
# Any parameter can also be given as a command-line option to the server, e.g.,
24
# "postgres -c log_connections=on". Some paramters can be changed at run time
25
# with the "SET" SQL command.
27
# Memory units: kB = kilobytes MB = megabytes GB = gigabytes
28
# Time units: ms = milliseconds s = seconds min = minutes h = hours d = days
31
#------------------------------------------------------------------------------
33
#------------------------------------------------------------------------------
35
# The default values of these variables are driven from the -D command-line
36
# option or PGDATA environment variable, represented here as ConfigDir.
38
#data_directory = 'ConfigDir' # use data in another directory
39
# (change requires restart)
40
#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
41
# (change requires restart)
42
#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
43
# (change requires restart)
45
# If external_pid_file is not explicitly set, no extra PID file is written.
46
#external_pid_file = '(none)' # write an extra PID file
47
# (change requires restart)
50
#------------------------------------------------------------------------------
51
# CONNECTIONS AND AUTHENTICATION
52
#------------------------------------------------------------------------------
54
# - Connection Settings -
56
listen_addresses = '*' # what IP address(es) to listen on;
57
# comma-separated list of addresses;
58
# defaults to 'localhost', '*' = all
59
# (change requires restart)
60
port = 5432 # (change requires restart)
61
max_connections = 100 # (change requires restart)
62
# Note: Increasing max_connections costs ~400 bytes of shared memory per
63
# connection slot, plus lock space (see max_locks_per_transaction). You might
64
# also need to raise shared_buffers to support more connections.
65
#superuser_reserved_connections = 3 # (change requires restart)
66
#unix_socket_directory = '' # (change requires restart)
67
#unix_socket_group = '' # (change requires restart)
68
#unix_socket_permissions = 0777 # begin with 0 to use octal notation
69
# (change requires restart)
70
#bonjour_name = '' # defaults to the computer name
71
# (change requires restart)
73
# - Security and Authentication -
75
#authentication_timeout = 1min # 1s-600s
76
#ssl = off # (change requires restart)
77
#ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # allowed SSL ciphers
78
# (change requires restart)
79
#password_encryption = on
80
#db_user_namespace = off
83
#krb_server_keyfile = '' # (change requires restart)
84
#krb_srvname = 'postgres' # (change requires restart, Kerberos only)
85
#krb_server_hostname = '' # empty string matches any keytab entry
86
# (change requires restart, Kerberos only)
87
#krb_caseins_users = off # (change requires restart)
88
#krb_realm = '' # (change requires restart)
91
# see "man 7 tcp" for details
93
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
94
# 0 selects the system default
95
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
96
# 0 selects the system default
97
#tcp_keepalives_count = 0 # TCP_KEEPCNT;
98
# 0 selects the system default
101
#------------------------------------------------------------------------------
102
# RESOURCE USAGE (except WAL)
103
#------------------------------------------------------------------------------
107
shared_buffers = 32MB # min 128kB or max_connections*16kB
108
# (change requires restart)
109
#temp_buffers = 8MB # min 800kB
110
#max_prepared_transactions = 5 # can be 0 or more
111
# (change requires restart)
112
# Note: Increasing max_prepared_transactions costs ~600 bytes of shared memory
113
# per transaction slot, plus lock space (see max_locks_per_transaction).
114
#work_mem = 1MB # min 64kB
115
#maintenance_work_mem = 16MB # min 1MB
116
#max_stack_depth = 2MB # min 100kB
120
max_fsm_pages = 204800 # min max_fsm_relations*16, 6 bytes each
121
# (change requires restart)
122
#max_fsm_relations = 1000 # min 100, ~70 bytes each
123
# (change requires restart)
125
# - Kernel Resource Usage -
127
#max_files_per_process = 1000 # min 25
128
# (change requires restart)
129
shared_preload_libraries = '$libdir/plugins/plugin_debugger.dll' # (change requires restart)
131
# - Cost-Based Vacuum Delay -
133
#vacuum_cost_delay = 0 # 0-1000 milliseconds
134
#vacuum_cost_page_hit = 1 # 0-10000 credits
135
#vacuum_cost_page_miss = 10 # 0-10000 credits
136
#vacuum_cost_page_dirty = 20 # 0-10000 credits
137
#vacuum_cost_limit = 200 # 1-10000 credits
139
# - Background Writer -
141
#bgwriter_delay = 200ms # 10-10000ms between rounds
142
#bgwriter_lru_maxpages = 100 # 0-1000 max buffers written/round
143
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multipler on buffers scanned/round
146
#------------------------------------------------------------------------------
148
#------------------------------------------------------------------------------
152
#fsync = on # turns forced synchronization on or off
153
#synchronous_commit = on # immediate fsync at commit
154
#wal_sync_method = fsync # the default is the first option
155
# supported by the operating system:
161
#full_page_writes = on # recover from partial page writes
162
#wal_buffers = 64kB # min 32kB
163
# (change requires restart)
164
#wal_writer_delay = 200ms # 1-10000 milliseconds
166
#commit_delay = 0 # range 0-100000, in microseconds
167
#commit_siblings = 5 # range 1-1000
171
#checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
172
#checkpoint_timeout = 5min # range 30s-1h
173
#checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
174
#checkpoint_warning = 30s # 0 is off
178
#archive_mode = off # allows archiving to be done
179
# (change requires restart)
180
#archive_command = '' # command to use to archive a logfile segment
181
#archive_timeout = 0 # force a logfile segment switch after this
185
#------------------------------------------------------------------------------
187
#------------------------------------------------------------------------------
189
# - Planner Method Configuration -
191
#enable_bitmapscan = on
193
#enable_hashjoin = on
194
#enable_indexscan = on
195
#enable_mergejoin = on
196
#enable_nestloop = on
201
# - Planner Cost Constants -
203
#seq_page_cost = 1.0 # measured on an arbitrary scale
204
#random_page_cost = 4.0 # same scale as above
205
#cpu_tuple_cost = 0.01 # same scale as above
206
#cpu_index_tuple_cost = 0.005 # same scale as above
207
#cpu_operator_cost = 0.0025 # same scale as above
208
#effective_cache_size = 128MB
210
# - Genetic Query Optimizer -
214
#geqo_effort = 5 # range 1-10
215
#geqo_pool_size = 0 # selects default based on effort
216
#geqo_generations = 0 # selects default based on effort
217
#geqo_selection_bias = 2.0 # range 1.5-2.0
219
# - Other Planner Options -
221
#default_statistics_target = 10 # range 1-1000
222
#constraint_exclusion = off
223
#from_collapse_limit = 8
224
#join_collapse_limit = 8 # 1 disables collapsing of explicit
228
#------------------------------------------------------------------------------
229
# ERROR REPORTING AND LOGGING
230
#------------------------------------------------------------------------------
234
log_destination = 'stderr' # Valid values are combinations of
235
# stderr, csvlog, syslog and eventlog,
236
# depending on platform. csvlog
237
# requires logging_collector to be on.
239
# This is used when logging to stderr:
240
logging_collector = on # Enable capturing of stderr and csvlog
241
# into log files. Required to be on for
243
# (change requires restart)
245
# These are only used if logging_collector is on:
246
#log_directory = 'pg_log' # directory where log files are written,
247
# can be absolute or relative to PGDATA
248
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern,
249
# can include strftime() escapes
250
#log_truncate_on_rotation = off # If on, an existing log file of the
251
# same name as the new log file will be
252
# truncated rather than appended to.
253
# But such truncation only occurs on
254
# time-driven rotation, not on restarts
255
# or size-driven rotation. Default is
256
# off, meaning append to existing files
258
#log_rotation_age = 1d # Automatic rotation of logfiles will
259
# happen after that time. 0 to disable.
260
#log_rotation_size = 10MB # Automatic rotation of logfiles will
261
# happen after that much log output.
264
# These are relevant when logging to syslog:
265
#syslog_facility = 'LOCAL0'
266
#syslog_ident = 'postgres'
271
#client_min_messages = notice # values in order of decreasing detail:
282
#log_min_messages = notice # values in order of decreasing detail:
296
#log_error_verbosity = default # terse, default, or verbose messages
298
#log_min_error_statement = error # values in order of decreasing detail:
310
# panic (effectively off)
312
#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
313
# and their durations, > 0 logs only
314
# statements running at least this time.
316
#silent_mode = off # DO NOT USE without syslog or
318
# (change requires restart)
322
#debug_print_parse = off
323
#debug_print_rewritten = off
324
#debug_print_plan = off
325
#debug_pretty_print = off
326
#log_checkpoints = off
327
#log_connections = off
328
#log_disconnections = off
331
log_line_prefix = '%t ' # special values:
334
# %r = remote host and port
337
# %t = timestamp without milliseconds
338
# %m = timestamp with milliseconds
341
# %l = session line number
342
# %s = session start timestamp
343
# %v = virtual transaction ID
344
# %x = transaction ID (0 if none)
345
# %q = stop here in non-session
349
#log_lock_waits = off # log lock waits >= deadlock_timeout
350
#log_statement = 'none' # none, ddl, mod, all
351
#log_temp_files = -1 # log temporary files equal or larger
352
# than specified size;
353
# -1 disables, 0 logs all temp files
354
#log_timezone = unknown # actually, defaults to TZ environment
358
#------------------------------------------------------------------------------
360
#------------------------------------------------------------------------------
362
# - Query/Index Statistics Collector -
364
#track_activities = on
366
#update_process_title = on
369
# - Statistics Monitoring -
371
#log_parser_stats = off
372
#log_planner_stats = off
373
#log_executor_stats = off
374
#log_statement_stats = off
377
#------------------------------------------------------------------------------
378
# AUTOVACUUM PARAMETERS
379
#------------------------------------------------------------------------------
381
#autovacuum = on # Enable autovacuum subprocess? 'on'
382
# requires track_counts to also be on.
383
#log_autovacuum_min_duration = -1 # -1 disables, 0 logs all actions and
384
# their durations, > 0 logs only
385
# actions running at least that time.
386
#autovacuum_max_workers = 3 # max number of autovacuum subprocesses
387
#autovacuum_naptime = 1min # time between autovacuum runs
388
#autovacuum_vacuum_threshold = 50 # min number of row updates before
390
#autovacuum_analyze_threshold = 50 # min number of row updates before
392
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum
393
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze
394
#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
395
# (change requires restart)
396
#autovacuum_vacuum_cost_delay = 20 # default vacuum cost delay for
397
# autovacuum, -1 means use
399
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
400
# autovacuum, -1 means use
404
#------------------------------------------------------------------------------
405
# CLIENT CONNECTION DEFAULTS
406
#------------------------------------------------------------------------------
408
# - Statement Behavior -
410
#search_path = '"$user",public' # schema names
411
#default_tablespace = '' # a tablespace name, '' uses the default
412
#temp_tablespaces = '' # a list of tablespace names, '' uses
413
# only default tablespace
414
#check_function_bodies = on
415
#default_transaction_isolation = 'read committed'
416
#default_transaction_read_only = off
417
#session_replication_role = 'origin'
418
#statement_timeout = 0 # 0 is disabled
419
#vacuum_freeze_min_age = 100000000
420
#xmlbinary = 'base64'
421
#xmloption = 'content'
423
# - Locale and Formatting -
425
datestyle = 'iso, mdy'
426
#timezone = unknown # actually, defaults to TZ environment
428
#timezone_abbreviations = 'Default' # Select the set of available time zone
429
# abbreviations. Currently, there are
433
# You can create your own file in
434
# share/timezonesets/.
435
#extra_float_digits = 0 # min -15, max 2
436
#client_encoding = sql_ascii # actually, defaults to database
439
# These settings are initialized by initdb, but they can be changed.
440
lc_messages = 'C' # locale for system error message
442
lc_monetary = 'C' # locale for monetary formatting
443
lc_numeric = 'C' # locale for number formatting
444
lc_time = 'C' # locale for time formatting
446
# default configuration for text search
447
default_text_search_config = 'pg_catalog.english'
451
#explain_pretty_print = on
452
#dynamic_library_path = '$libdir'
453
#local_preload_libraries = ''
456
#------------------------------------------------------------------------------
458
#------------------------------------------------------------------------------
460
#deadlock_timeout = 1s
461
#max_locks_per_transaction = 64 # min 10
462
# (change requires restart)
463
# Note: Each lock table slot uses ~270 bytes of shared memory, and there are
464
# max_locks_per_transaction * (max_connections + max_prepared_transactions)
468
#------------------------------------------------------------------------------
469
# VERSION/PLATFORM COMPATIBILITY
470
#------------------------------------------------------------------------------
472
# - Previous PostgreSQL Versions -
474
#add_missing_from = off
476
#backslash_quote = safe_encoding # on, off, or safe_encoding
477
#default_with_oids = off
478
#escape_string_warning = on
479
#regex_flavor = advanced # advanced, extended, or basic
480
#sql_inheritance = on
481
#standard_conforming_strings = off
482
#synchronize_seqscans = on
484
# - Other Platforms and Clients -
486
#transform_null_equals = off
489
#------------------------------------------------------------------------------
491
#------------------------------------------------------------------------------
493
#custom_variable_classes = '' # list of custom variable class names