2
<dt>Select a language for the install and press Enter</dt>
3
<dt>Select a location for the install and press Enter</dt>
4
<dt>On Keyboard Layout select No and press Enter</dt>
5
<dt>Select the origin of the keyboard and press Enter /!\ The default for your location and language should already be selected.</dt>
6
<dt>Select the layout you wish to use on the keyboard and press Enter /!\ The default for your location and language should already be selected.</dt>
7
<dt>Add a hostname for the machine and press Enter</dt>
8
<dt>Select Manual and press Enter</dt>
9
<dt>Select Configure iSCSI volumes</dt>
10
<dt>Select Log into iSCSI targets /!\ If the machine is diskless, these steps will appear before selecting the partition scheme</dt>
11
<dt>Enter the IP address of the iSCSI target</dt>
12
<dt>Leave the indicator username blank</dt>
13
<dt>Select a target from the list</dt>
14
<dt>Select Finish</dt>
15
<dt>On the list of partitions, select the new one (VIRTUAL DISK)</dt>
16
<dt>Select pri/log "drive size" FREE SPACE and press Enter</dt>
17
<dt>Select Create a new partition and press Enter</dt>
18
<dt>Change the size to 20.0 GB and press Enter /!\ Alter for smaller drives</dt>
19
<dt>Select Primary and press Enter</dt>
20
<dt>Select Beginning and press Enter</dt>
21
<dt>Select Use as: line and press Enter</dt>
22
<dt>Select Ext4 journaling file system and press Enter</dt>
23
<dt>Select Done setting up the partition and press Enter</dt>
24
<dt>Select pri/log "drive size" FREE SPACE and press Enter</dt>
25
<dt>Select Create a new partition and press Enter</dt>
26
<dt>Change the size to 2.0 GB and press Enter /!\ Alter for smaller drives</dt>
27
<dt>Select Logical and press Enter</dt>
28
<dt>Select Beginning and press Enter</dt>
29
<dt>Select Use as: line and press Enter</dt>
30
<dt>Select swap area and press Enter</dt>
31
<dt>Select Done setting up the partition and press Enter</dt>
32
<dt>Select pri/log "drive size" FREE SPACE and press Enter</dt>
33
<dt>Select Create a new partition and press Enter</dt>
34
<dt>Press Enter to use the whole of the space remaining</dt>
35
<dt>Select Logical and press Enter</dt>
36
<dt>Select Beginning and press Enter</dt>
37
<dt>Select Use as: line and press Enter</dt>
38
<dt>Select Ext4 journaling file system and press Enter</dt>
39
<dt>Select Done setting up the partition and press Enter</dt>
40
<dt>Select Finish partitioning and write changes to disk and press Enter</dt>
41
<dt>Select Yes to accept the changes and press Enter</dt>
42
<dt>Type in your name and press Enter</dt>
43
<dt>Add a username and press Enter</dt>
44
<dt>Add a password and press Enter</dt>
45
<dt>Confirm your password and press Enter</dt>
46
<dt>Select No for encrypted home directory and press Enter</dt>
47
<dt>Input http proxy info or press Enter</dt>
48
<dt>Wait for a while /!\ The install may seem like it has locked at 6% but is actually working in the background.</dt>
49
<dt>Select Yes to setting your clock to utc and press Enter</dt>
50
<dt>Remove the cd and press Enter</dt>
51
<dt>This will then reboot the machine log in and check the desktop is installed</dt>
54
If all actions produce the expected results listed, please <a href="results#add_result">submit</a> a 'passed' result.
55
If an action fails, or produces an unexpected result, please <a href="results#add_result">submit</a> a 'failed' result and <a href="../../buginstructions">file a bug</a>. Please be sure to include the bug number when you <a href="results#add_result">submit</a> your result</strong>.
b'\\ No newline at end of file'