~team-iquik/lmsensors/trunk : contents of CHANGES at revision 4552

~team-iquik/lmsensors/trunk : (revision 4552)

3827 by khali Reset the list of changes for 3.0.0-rc1. So many things changed	1	lm-sensors CHANGES file
853 by mds	2	-----------------------
2121 by mds fix sg_tlx /proc entries. Ticket #1476.	3
4544 by khali PCI bus is always required even if it might be missing on some	4	SVN HEAD
4548 by khali libsensors: Fix warning about library path not in /etc/ld.so.conf	5	libsensors: Fix warning about library path not in /etc/ld.so.conf
4547 by khali sensors: Fix libiconv linkage need detection in rare corner case.	6	sensors: Fix libiconv linkage need detection in rare corner case
4552 by groeck sensors: add humidity data to output of sensors command	7	Add support for humidity output
4544 by khali PCI bus is always required even if it might be missing on some	8	sensors-detect: Don't choke on systems without PCI
4546 by khali Avoid probing EDID addresses (0x50-0x57) on graphics card adapters.	9	Avoid probing EDID addresses on graphics cards (#2386)
4550 by groeck sensors-detect: Add detection of NCT6779D and NCT6102D/NCT6106D	10	Add detection of NCT6779D and NCT6102D/NCT6106D
4551 by groeck sensors-detect: Add detection of SMSC LPC47N217 and SIO10N268	11	Add detection of SMSC LPC47N217 and SIO10N268
4544 by khali PCI bus is always required even if it might be missing on some	12
4542 by khali Prepare for release.	13	3.3.2 (2012-03-14)
4516 by groeck Add support for additional sysfs attributes to libsensors and to sensors command	14	libsensors: Added support for new sysfs attributes
4525 by khali Upcoming change in sysfs will break the way libsensors detects if	15	Change sysfs detection to survive upcoming kernel changes
4533 by khali Fix memory leaks in sensord revealed by valgrind.	16	sensord: Fix memory leaks revealed by valgrind
4535 by khali Calling strcat twice in a row is inefficient, it's better to use	17	Minor performance improvements
4516 by groeck Add support for additional sysfs attributes to libsensors and to sensors command	18	sensors: Added support for new sysfs attributes
4517 by groeck sensors: Display both instantaneous and average power	19	Display both instantaneous and average power if available.
4519 by khali sensors: Report thermal sensor type 1 as CPU diode.	20	Report thermal sensor type 1 as CPU diode
4520 by khali sensors: Align power values better.	21	Align power values better
4538 by groeck Fix power interval output	22	Fix power interval output
4513 by khali fancontrol: Support setup where one PWM output controls several fans	23	fancontrol: Support setup where one PWM output controls several fans
4514 by khali fancontrol: Output error messages to stderr	24	Output error messages to stderr
4504 by khali Stop calling for PIIX5 SMBus testers. It's been so long and we never	25	sensors-detect: Stop calling for PIIX5 SMBus testers
4505 by khali Improve filtering of fake DMI data.	26	Improve filtering of fake DMI data
4506 by khali Print DMI system/product version if available. On some laptops, the	27	Print DMI system/product version if available
4507 by khali Fix loading of the cpuid module. On non-udev systems, or even on udev	28	Fix loading of the cpuid module
4508 by khali Make LM73 detection less problematic.	29	Make LM73 detection less problematic
4510 by khali Add detection of National Semiconductor LM96163.	30	Add detection of National Semiconductor LM96163
4522 by groeck Add detection of GMT G781	31	Add detection of GMT G781
4524 by khali Properly handle Super-I/O chips without logical device. Just report	32	Properly handle Super-I/O chips without logical device
4526 by khali Add detection of the National Semiconductor (now Texas Instruments)	33	Add detection of National Semiconductor LM96080
4529 by khali Add detection of ITE IT8771E.	34	Add detection of ITE IT8771E
4531 by khali Add detection of ITE IT8781F, IT8782F and IT8783F.	35	Add detection of ITE IT8781F, IT8782F and IT8783F
4536 by khali Add detection of ST Microelectronics STTS2002 and STTS3000.	36	Add detection of ITE IT8510E/TE/G, IT8511E/TE/G,
	37	IT8513E/F/G, and IT8518E
	38	Add detection of ST Microelectronics STTS2002 and STTS3000
4539 by groeck sensors-detect: Add detection of IDT TSE2002GB2, TS3000GB2, Microchip MCP9804,	39	Add detection of IDT TSE2002GB2, TS3000GB2, Microchip MCP9804,
	40	and Atmel AT30TS00
4504 by khali Stop calling for PIIX5 SMBus testers. It's been so long and we never	41
4502 by khali Prepare for release.	42	3.3.1 (2011-07-21)
4478 by khali isadump: Add support for word (16-bit) and long (32-bit) reads	43	isadump: Add support for word (16-bit) and long (32-bit) reads
4479 by khali isaset: Add support for word (16-bit) and long (32-bit) writes	44	isaset: Add support for word (16-bit) and long (32-bit) writes
4490 by khali Add a default configuration section for the SMSC EMC6W201.	45	sensors.conf.default: Add a section for the EMC6W201
4472 by khali Add AMD family 15h CPU detection.	46	sensors-detect: Add AMD family 15h CPU detection
4475 by khali Add detection of ITE IT8516E/F/G.	47	Add detection of ADT7461A / NCT1008
4475 by khali Add detection of ITE IT8516E/F/G.	48	Add detection of ITE IT8516E/F/G
4483 by khali Drop unreliable smart battery detection.	49	Integrate with systemd
4483 by khali Drop unreliable smart battery detection.	50	Drop unreliable smart battery detection
4484 by khali Add detection of SMSC EMC6W201.	51	Add detection of SMSC EMC6W201
4486 by khali Drop unreliable detection of Maxim MAX6650 and MAX6651.	52	Drop unreliable detection of Maxim MAX6650
4489 by khali Patch from Steve Glendinning (SMSC):	53	Add detection of SMSC EMC2300
4494 by groeck Add detection of MAX6642	54	Add detection of MAX6642
4495 by khali Add detection of ITE IT8772E.	55	Add detection of ITE IT8772E
4497 by khali Don't advertise the ipmisensors driver, it doesn't work.	56	Don't advertise the ipmisensors driver
4499 by groeck Add code to detect SA56004.	57	Add detection of SA56004
4500 by groeck Add code to detect LM95245	58	Add detection of LM95245
4472 by khali Add AMD family 15h CPU detection.	59
4467 by khali Prepare for release.	60	3.3.0 (2011-03-28)
4407 by khali Warn the user is either flex or bison is missing.	61	Makefile: Check for bison and flex
4418 by khali Add missing ticket reference.	62	libsensors: Add support for intrusion detection (#2370)
4425 by khali Compute MAX_SUBFEATURES at run-time (#2378).	63	Compute MAX_SUBFEATURES at run-time (#2378)
4426 by khali Compute MAX_*_SENSOR_TYPES at build time (#2378).	64	Compute MAX_*_SENSOR_TYPES at build time (#2378)
4465 by khali Add a default configuration section for the W83795G/ADG.	65	Add support for new sysfs attributes (#2379)
4447 by groeck Update CHANGES to reflect addition of humidity sensor support to libsensors	66	Add support for humidity sensors
4457 by khali Only export from libsensors symbols which are actually public (i.e.	67	Limit symbol visibility
4427 by groeck Added support for new sysfs attributes	68	sensors.conf.default: Add a section for the W83627THF
4423 by khali Add a default configuration section for the SMSC SCH5127.	69	Add a section for the SCH5127
4431 by khali Add a default configuration section for the Winbond/Nuvoton W83627UHG.	70	Add a section for the W83627UHG
4465 by khali Add a default configuration section for the W83795G/ADG.	71	Add a section for the W83795G/ADG
4466 by khali Add a default configuration section for the F81865F.	72	Add a section for the F81865F
4415 by khali sensors: Display 3 decimal places in raw output.	73	sensors: Display 3 decimal places in raw output
4418 by khali Add missing ticket reference.	74	Add support for intrusion detection (#2370)
4463 by khali Add detection of many Fintek Super-I/O devices.	75	Fix automatic unit selection of 0 value
4465 by khali Add a default configuration section for the W83795G/ADG.	76	Added support for additional sensor attributes (#2379)
4405 by khali sensors-detect: Improve LM90 and W83L771 detection.	77	sensors-detect: Improve LM90 and W83L771 detection
4411 by khali Merge entries.	78	Fix error seen if I2C bus numbers are not sequential
4422 by khali Add detection of SMSC EMC1423.	79	Add detection of SMSC EMC1423
4424 by khali Add detection of the Analog Devices ADT7410.	80	Add detection of the Analog Devices ADT7410
4430 by khali Add detection of the National Semiconductor LM94.	81	Add detection of the National Semiconductor LM94
4433 by khali Add detection of the ITE IT8728F.	82	Add detection of the ITE IT8728F
4435 by khali Add missing ticket reference.	83	Implement universal detection for coretemp (#2381)
4436 by groeck Added detection of MAX6639 to sensors-detect	84	Add detection of Maxim MAX6639
4443 by groeck Add support to detect EMC1002, EMC1033, EMC1046, EMC1047,	85	Add detection of SMSC EMC1023, EMC1043, EMC1053, and EMC1063
4439 by khali Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F.	86	Add detection of Nuvoton NCT5571D, NCT5577D and NCT6776F
4443 by groeck Add support to detect EMC1002, EMC1033, EMC1046, EMC1047,	87	Add detection of SMSC EMC1002, EMC1033, EMC1046, EMC1047,
	88	EMC1072, EMC1073, EMC1074, EMC1402, and EMC1424
4444 by groeck Fixed address ranges checked for SMSC EMC1403 and EMC1404	89	Fixed address ranges checked for SMSC EMC1403 and EMC1404.
4448 by khali Fix detection of SPD EEPROM on DDR3 memory modules. DDR3 uses CRC16 over	90	Fix detection of SPD EEPROM on DDR3 memory modules
4451 by groeck Add support for AMD Family 12h and 14h thermal sensors to sensors-detect	91	Add detection of AMD family 12h and 14h thermal sensors
4452 by groeck sensors-detect: Add detection of EMC6D103S	92	Add detection of EMC6D103S
4453 by khali Add detection of National Semiconductor LM75A.	93	Add detection of National Semiconductor LM75A
4454 by khali Count DMI chassis type 8 as a laptop. Reported by Francis Moreau.	94	Count DMI chassis type 8 as a laptop
4459 by khali Add detection of SMSC SCH5627.	95	Add detection of SMSC SCH5627
4463 by khali Add detection of many Fintek Super-I/O devices.	96	Add detection of many Fintek Super-I/O devices
4405 by khali sensors-detect: Improve LM90 and W83L771 detection.	97
4402 by khali Prepare for release.	98	3.2.0 (2010-10-10)
4370 by khali Increase MAX_SENSORS_PER_TYPE to 24. The old value of 20 isn't enough	99	libsensors: Increase MAX_SENSORS_PER_TYPE to 24
4384 by khali Map individual beep features. We had symbols for them for a long time,	100	Map individual beep features
4385 by khali Change libsensors license from GPL to LGPL.	101	Change license to LGPL
4395 by khali When looking for pwm/fan correlations, sample all fans before returning	102	pwmconfig: Sample all fan speeds before returning to full speed (#2380)
4396 by khali Wait for fans to return to full speed only once per PWM. In the rare	103	Wait for fans to return to full speed only once per PWM
4397 by khali Drop legacy calls to cut. procfs had several values per file, but	104	Drop legacy invocations of cut
4387 by khali W83667HG config is similar to W83627EHF/DHG.	105	sensors.conf.default: W83667HG config is similar to W83627EHF/DHG
4376 by khali Fix support of multiple chips. Regression in 3.1.2, faulty commit is	106	sensord: Fix support of multiple chips (#2377)
4377 by khali Properly handle read errors from sensor inputs. Report them as "N/A".	107	sensors: Properly handle sensor input read errors
4366 by khali sensors-detect: Give udev time to settle before accessing i2c device	108	sensors-detect: Give udev time to settle before accessing i2c nodes
4367 by khali Add support for Intel PCH (SMBus).	109	Add support for Intel PCH (SMBus)
4374 by khali Add detection of SMSC EMC1403 and EMC1404.	110	Add support for SMSC EMC1403 and EMC1404
4378 by khali Fix detection of RB-C3 AMD Family 10h CPU. This core is only used in	111	Fix detection of RB-C3 AMD Family 10h CPU
4379 by khali Add detection of the SMSC EMC2103. Patch from Steve Glendinning (SMSC).	112	Add support for SMSC EMC2103
4380 by jwrdegoede sensors-detect: Add support for Fintek F71889ED	113	Add support for Fintek F71889ED
4382 by khali Add detection of ITE IT8721F.	114	Add support for ITE IT8721F
4386 by khali Fix Maxim MAX6690 detection.	115	Fix Maxim MAX6690 support
4389 by khali Let ISA-access and non-sensor devices take part in the confidence	116	Fix handling of duplicate detections
4391 by khali Add detection of STMicroelectronics STTS424 (JEDEC JC42.4-compliant	117	Add support for STMicroelectronics STTS424
4392 by khali Add support for the NXP SE97.	118	Add support for NXP SE97 / SE97B
4392 by khali Add support for the NXP SE97.	119	Add reference to NCT6771F/NCT6772F/NCT6775F
4393 by khali Add detection of several JC42.4 compliant temperature sensors.	120	Add support for several JC42.4 compliant temperature sensors
4399 by groeck Add support for IT8512E/F and IT8758E to sensors-detect	121	Add support for ITE IT8512E/F and IT8758E
4366 by khali sensors-detect: Give udev time to settle before accessing i2c device	122
4364 by khali Prepare for release.	123	3.1.2 (2010-02-02)
4311 by khali Support upcoming sysfs path to i2c adapters.	124	libsensors: Support upcoming sysfs path to i2c adapters
4334 by khali Add support for HID devices.	125	Add support for HID devices
4315 by khali Check that all referenced sysfs files exist before starting. If not,	126	fancontrol: Check that all referenced sysfs files exist
4319 by khali Save hwmon device paths and names in configuration file, and check them	127	Check that all devices match the configuration file
4301 by khali Exit immediately if not root.	128	pwmconfig: Exit immediately if not root
4319 by khali Save hwmon device paths and names in configuration file, and check them	129	Save device paths and names in configuration file
4302 by khali Encourage the user to not modify /etc/sensors3.conf. Suggested by	130	sensors.conf.default: Encourage user to not modify this file
4350 by khali Add a default configuration section for adt7473 and adt7475.	131	Add a section for adt7473 and adt7475
	132	Add a section for adt7476 and adt7490
4345 by khali "alarm" is a glibc function, don't use this identifier for our own	133	sensord: Don't name our variables "alarm"
4346 by andy CHANGES appendix for commits r5789:r5796	134	Major refactoring including
	135	- Cleanup of huge functions
	136	- Remove needless casts
	137	- Fix coding style
	138	- Break long lines
	139	- Make functions more robust
	140	- Remove unused return value
4347 by khali Detect ADT7473 at 0x2c and 0x2d.	141	- Make CGI script more XHTML compatible
4349 by khali Fix a build warning in set_degstr. The prototype of iconv() is	142	sensors: Fix iconv-related build warning in set_degstr
4303 by andy sensors-detect: Refer to tmp401 driver if TMP411 is detected	143	sensors-detect: Refer to tmp401 driver if TMP411 is detected
4304 by khali Clean up the discovery of i2c adapters, their parent and their	144	Clean up the discovery of i2c adapters
4305 by khali Report unsupported Access Bus adapters, as we already do for SMBus.	145	Report unsupported Access Bus adapters
4306 by andy sensors-detect: Add TMP42x chip detection	146	Add detection for TI's TMP421, TMP422 and TMP423 chips
4309 by khali The SMSC LPC47M233 isn't currently supported. If it ever is, it will most	147	The SMSC LPC47M233 isn't currently supported
4310 by khali Support upcoming sysfs path to i2c adapters.	148	Support upcoming sysfs path to i2c adapters
4313 by khali Document the previous change.	149	Rename the modprobe configuration file to lm_sensors.conf
4360 by khali Refine the detection of AMD family 10h processors with working	150	Only report AMD Family 10h CPU with working sensors
4318 by khali Drop AMD K10 detection (unreliable sensors).	151	Add detection for AMD Family 11h thermal sensors
4321 by khali Add detection for Intel Atom thermal sensors.	152	Add detection for Intel Atom thermal sensors
4327 by khali Add detection for National Semiconductor LM73.	153	Add detection for National Semiconductor LM73
4329 by khali Add SMBus detection for AMD Hudson-2.	154	Add SMBus detection for AMD Hudson-2
4330 by khali Add detection for Nuvoton W83667HG-B and W83677HG-I.	155	Add detection for Nuvoton W83667HG-B and W83677HG-I
4332 by khali Add detection for Analog Devices ADT7490.	156	Add detection for Analog Devices ADT7490
4335 by jwrdegoede Refer to f71882fg driver if F71889FG is detected	157	Refer to f71882fg driver if F71889FG is detected
4336 by jwrdegoede sensors-detect: Add detecton for Fintek F71869FG	158	Add detecton for Fintek F71869FG
4347 by khali Detect ADT7473 at 0x2c and 0x2d.	159	Detect ADT7473 at 0x2c and 0x2d
4351 by khali More known revisions for the ADT7476.	160	More known revisions for the ADT7476
4353 by khali Add detection for Nuvoton W83L771AWG/ASG.	161	Add detection for Nuvoton W83L771AWG/ASG
4355 by khali Add detection for VIA Nano. Update driver name for VIA C7.	162	Add detection for VIA Nano
4357 by khali Add detection for Texas Instruments AMC6821.	163	Add detection for Texas Instruments AMC6821
4362 by khali Add detection for Analog Devices ADT7411.	164	Add detection for Analog Devices ADT7411
4307 by khali Fix exit code. If there's no change needed, this is a success, not	165	sysconfig-lm_sensors-convert: Fix exit code
4301 by khali Exit immediately if not root.	166
4297 by khali Prepare for release.	167	3.1.1 (2009-06-21)
4270 by khali Use geteuid instead of getuid so that setuid bit works.	168	isadump: Use geteuid instead of getuid so that setuid bit works
	169	isaset: Use geteuid instead of getuid so that setuid bit works
4288 by khali From Yuriy Kaminskiy:	170	libsensors: Don't rely on dirent->dt_type being set
4295 by khali libsensors: New method to free the memory allocated for the internal	171	New method to free the memory allocated for chip names
4271 by khali Include generated source files in dependency checking.	172	Makefile: Include generated source files in dependency checking
4272 by khali Make it possible to skip building of the static library. Just run:	173	Make it possible to skip building of the static library
4276 by khali Add support for absolute path to hwmon devices.	174	fancontrol: Add support for absolute path to hwmon devices
4285 by khali Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection.	175	sensord: Remove the hidden commandline interface
	176	Introduce struct sensord_arguments
	177	Using sigaction for signal handlers
	178	Convert to linux coding style
	179	Cleanup and refactoring of the source code
4291 by khali Don't use the system log when generating a CGI script. This is is	180	Don't use the system log when generating a CGI script
4292 by khali Disable unit scaling for fan speeds. We want fan speed to be reported as	181	Disable unit scaling for fan speeds
4294 by khali Use the "daemon" logging facility instead of "local4" by default.	182	Use daemon logging facility instead of local4 by default
4295 by khali libsensors: New method to free the memory allocated for the internal	183	Fix a memory leak when a chip name is provided
	184	sensors: Fix a memory leak when a chip name is provided
4259 by khali Add nNidia nForce MCP78S SMBus detection.	185	sensors-detect: Add nNidia nForce MCP78S SMBus detection
4261 by khali Display the base I/O address of Super-I/O logical device if it is	186	Display Super-I/O address even if LD is disabled
4264 by khali Differentiate between PC8374L and WPCD377I. Both chips have the same	187	Differentiate between PC8374L and WPCD377I
4265 by khali Use dmidecode to find IPMI interfaces if available. This is required	188	Use dmidecode to find IPMI interfaces if available
4268 by khali Add Nuvoton W83795G/ADG detection. Original patch from Wei Song (Nuvoton).	189	Add Nuvoton W83795G/ADG detection
4269 by khali Add National Semiconductor LM95241 detection.	190	Add National Semiconductor LM95241 detection
4285 by khali Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection.	191	Add Winbond/Nuvoton W83627DHG-P and W83627UHG detection
4259 by khali Add nNidia nForce MCP78S SMBus detection.	192
4255 by khali Prepare for release.	193	3.1.0 "Happy Birthday Lina" (2009-02-28)
4040 by khali Add support for instantaneous power sensors.	194	libsensors: Add support for instantaneous power sensors
4041 by khali Add support for current sensors.	195	Add support for current sensors
4186 by khali Fix error propagation during expression evaluation.	196	Fix error propagation during expression evaluation
4205 by khali Add missing ticket numbers.	197	Detect excessive recursion depth during expression eval (#2365)
4220 by khali Return a string rather than NULL for unknown errors. Patch from	198	Return a string rather than NULL for unknown errors
4223 by khali When looking for hwmon device attributes, skip non-file sysfs entries.	199	Skip non-file sysfs entries for speed
4224 by khali Fix memory leak in scanner when using flex 2.5.9 or later.	200	Fix memory leak in scanner when using flex 2.5.9 or later
4225 by khali Report configuration file read errors.	201	Report configuration file read errors
4230 by khali Exit the configuration file parser as soon as we are done with it.	202	Exit the configuration file parser sooner
4231 by khali Free bus statements from the configuration file as soon as we are done	203	Free bus statements from the configuration file sooner
4235 by khali Include the configuration file name when reporting parse errors.	204	Read extra configuration files from /etc/sensors.d (#2174)
	205	Report the configuration file name on parse errors
4320 by khali Add missing log entry.	206	Add support for ACPI devices
4241 by khali Update.	207	libsensors.3: Reformat for clarity
	208	Document function sensors_snprintf_chip_name
	209	Document error-related functions
4209 by khali Support new format of /etc/sysconfig/lm_sensors (#2246).	210	lm_sensors.init: Support new format of /etc/sysconfig/lm_sensors (#2246)
4211 by khali Drop support for kernels 2.4 and earlier.	211	Drop support for kernels 2.4 and earlier
4190 by khali Delete lm_sensors.init.suse. The actual SuSE initialization script is	212	lm_sensors.init.suse: Delete (actual SuSE script is much different)
4205 by khali Add missing ticket numbers.	213	Makefile: Install sensors.conf.default instead of sensors.conf.eg (#2333)
4217 by khali Drop support for kernels 2.4 and earlier.	214	pwmconfig: Drop support for kernels 2.4 and earlier
4216 by khali Don't round temperature values.	215	fancontrol: Don't round temperature values
4217 by khali Drop support for kernels 2.4 and earlier.	216	Drop support for kernels 2.4 and earlier
4253 by khali Exit if configuration file can't be read.	217	Exit if configuration file can't be read
4254 by khali Create pid file only after successful initialization.	218	Create pid file only after successful initialization
4033 by khali Delete maxilife scripts. The maxilife driver was not ported to	219	maxilife scripts: Delete (driver never ported to Linux 2.6)
4120 by khali Accept negative temperatures in RRD database.	220	sensord: Accept negative temperatures in RRD database
4185 by khali Don't bail out on transient errors (#2330).	221	Don't bail out on transient errors (#2330)
4040 by khali Add support for instantaneous power sensors.	222	sensors: Add support for instantaneous power sensors
4041 by khali Add support for current sensors.	223	Add support for current sensors
4214 by khali Fix exit code in error case (for example no sensors found.) Patch from	224	Fix exit code in error case
4227 by khali Typo.	225	sensors.conf.5: Lots of additions and reworks
4205 by khali Add missing ticket numbers.	226	sensors.conf.default: New, minimum version of sensors.conf.eg (#2333)
4203 by khali Add sections for the SMSC SCH311x and SCH5027.	227	Add sections for the SMSC SCH311x and SCH5027
4043 by khali The LM99 offset is now handled in the lm90 driver.	228	sensors.conf.eg: The LM99 offset is now handled in the lm90 driver
4177 by khali Move the help section of sensors.conf.eg to sensors.conf.5, so that	229	Move help section to sensors.conf.5
4181 by khali Update.	230	Add a section for the Asus/Fintek F8000
4034 by khali Fix detection of ADT7463 and LM96000.	231	sensors-detect: Fix detection of ADT7463 and LM96000
4208 by khali Add nNidia nForce MCP67, MCP73, MCP79 SMBus support.	232	Add VIA VX800/VX820 SMBus support
4039 by khali Fix detection of Intel 5000 series FB-DIMM AMB.	233	Fix detection of Intel 5000 series FB-DIMM AMB
4045 by khali Fix detection of ADT7462.	234	Fix detection of ADT7462
4048 by khali Fix detection of SMSC LPC47M292. Add detection of SMSC LPC47M233.	235	Fix detection of SMSC LPC47M292
	236	Add SMSC LPC47M233 support
4050 by khali Drop support for Linux 2.4.	237	Drop support for Linux 2.4 (#2325)
4053 by khali Handle special case chips more efficiently. Instead of listing every	238	Handle special case chips more efficiently
4056 by khali Fix SMBus detection of early W83627EHF chips.	239	Fix SMBus detection of W83627EHF and W83627DHG
4057 by khali Get I2C adapter driver names from sysfs. The old method (matching against	240	Get I2C adapter driver names from sysfs (#2328)
4081 by khali List yesterday's sensors-detect changes.	241	Drop old SiS I2C adapter entries
	242	Drop separate LM78-J entry
	243	Merge all Mozart-2 entries
	244	Merge both GL518SM entries into one
	245	Complete GL520SM detection
	246	Improve GL525SM detection a bit
4082 by khali As of kernel 2.6.28, alias detection is handled by kernel drivers	247	Let kernel 2.6.28 and later handle chips aliases
4083 by khali Unload kernel drivers which we loaded ourselves when we are done with them.	248	Unload kernel drivers when we are done with them (#2329)
4084 by khali Fix handling of bus driver names with an underscore.	249	Fix handling of bus driver names with an underscore
	250	Simplify loading of bus drivers
4091 by khali Fix bus number prediction logic (#2327). We don't need anything complex,	251	Fix bus number prediction logic (#2327)
4102 by khali Suggest the sbs driver for smart batteries.	252	Suggest the sbs driver for smart batteries
4140 by khali Drop alias detection for Super-I/O chips. It never actually worked,	253	Drop alias detection for Super-I/O chips
4142 by khali Move alias detection after all chip detections. This is slightly less	254	Move alias detection after all chip detections
4144 by khali Probe chip types from safest to more risky. Start with sensors embedded	255	Probe chip types from safest to more risky (#2322)
4148 by khali Add an option to skip ISA probes except IPMI. The idea is that only	256	Add an option to skip ISA probes except IPMI
4149 by khali Skip ISA detection by default if a Super I/O was found. In general,	257	Skip ISA detection by default if a Super I/O was found (#2322)
4150 by khali Do not scan I2C adapters on multimedia cards by default. I've never	258	Do not scan I2C adapters on multimedia cards by default
4156 by khali Skip SMBus probing by default if a Super I/O was found. The user can	259	Skip SMBus probing by default if a Super I/O was found (#2322)
4157 by khali Merge sensors-detect-stat.pl functionality into sensors-detect. This	260	Display I2C address statictics with --stat
4160 by khali Document the new detection order and rules.	261	Document the new detection order and rules
4163 by khali Gather DMI data and print it at start-up. We may use this data for	262	Gather DMI data and print it at start-up
4170 by khali Add Supermicro to the SMBus probing white list.	263	Always probe the SMBus on Asus, Tyan and Supermicro boards
4165 by khali Move IPMI interface detection to its own section. IPMI is really different	264	Move IPMI interface detection to its own section
4167 by khali Skip IPMI probing on laptops. IPMI is almost exclusively implemented on	265	Skip IPMI probing on laptops
4176 by khali Add Winbond/Nuvoton W83667HG detection.	266	Add Winbond/Nuvoton W83667HG support
4182 by khali Add Intel Core I7 support. Patch from Reinhard Nissl.	267	Add Intel Core I7 support
4209 by khali Support new format of /etc/sysconfig/lm_sensors (#2246).	268	Generate new format for /etc/sysconfig/lm_sensors (#2246)
4195 by khali Print warnings about missing modules on screen, rather than telling	269	Print warnings about missing modules on screen
4206 by khali Fix detection of older DS1621.	270	Fix detection of older DS1621
4208 by khali Add nNidia nForce MCP67, MCP73, MCP79 SMBus support.	271	Add nNidia nForce MCP67, MCP73, MCP79 SMBus support
4222 by khali Do not include in the driver list the PCI and USB drivers which are	272	Exclude auto-loaded PCI and USB drivers from list (#2368)
4243 by jwrdegoede sensors-detect: Add a special case for probing i2c address 0x73 for FSC chips,	273	Special case probing i2c address 0x73 (to not crash FSC ICs)
4244 by jwrdegoede sensors-detect: Add detection of FSC Hades and Syleus IC's	274	Add detection of FSC Hades and Syleus IC's
4246 by khali Add detection of Winbond WPCD377I (no sensors).	275	Add detection of Winbond WPCD377I (no sensors)
4158 by khali Minor consistency edit.	276	sensors-detect-stat.pl: Delete (functionality merged into sensors-detect)
4210 by khali Include a sample conversion script to address the configuration file	277	sysconfig-lm_sensors-convert: Sample config file conversion script (#2246)
4033 by khali Delete maxilife scripts. The maxilife driver was not ported to	278
4030 by khali Prepare for release.	279	3.0.3 (2008-09-28)
4001 by khali The free_expr() function is no longer static in lib/init.c (it is also	280	libsensors: Avoid namespace pollution
3989 by khali Don't use named pipes when we don't need them. Named pipes have been reported	281	fancontrol: Don't use named pipes when we don't need them (#2319)
4030 by khali Prepare for release.	282	pwmconfig: Tell the user about gnuplot if it isn't installed
4035 by khali Add trac ticket number.	283	Fix MINSTOP and MINSTART test functions (#2340)
4013 by khali Test MINSTOP before MINSTART. We know that MINSTART can't be less than	284	Test MINSTOP before MINSTART
4014 by khali Use the same step values for the MINSTOP test as we do for the detailed	285	Use better step values for MINSTOP test
4016 by khali Detect and report obviously incorrect fan speeds.	286	Print the revision and date at start-up
	287	Detect and report obviously incorrect fan speeds
4017 by khali Determine MINSTOP automatically.	288	Determine MINSTOP automatically
4018 by khali Skip MINSTOP and MINSTART tests if fan can't stop.	289	Skip MINSTOP and MINSTART tests if fan can't stop
4019 by khali Change default for MINTEMP from 0 to 20 degrees C. Computers never run at	290	Change default for MINTEMP from 0 to 20 degrees C
4027 by khali Add support for drivers that place the hwmon attributes in the hwmon	291	Add support for attributes in the hwmon class device (#2260)
4028 by khali Update pwmconfig manual page.	292	Update manual page
4038 by khali Drop "label temp#_crit" statements. Since version 3.0.0, sensors no	293	sensors.conf.eg: Drop "label temp#_crit" statements
3979 by khali Add Intel SCH (bus) support.	294	sensors-detect: Add Intel SCH (bus) support
3981 by khali Identify the lm85-compatible chips individually. The previous method was	295	Add SMSC EMC6D103 support
3983 by khali Improve MAX6657, MAX6658, MAX6659 detection.	296	Improve MAX6657, MAX6658, MAX6659 detection
3984 by khali Cache the byte data reads. As we keep reading the same registers over	297	Cache the byte data reads (#2326)
3988 by khali Add Maxim MAX6654/MAX6690 detection.	298	Add Maxim MAX6654/MAX6690 support
	299	Add National Semiconductor LM95231 support
	300	Add Analog Devices ADT7481 support
3992 by khali Merge several alias detection functions.	301	Refactor alias detection functions
3993 by khali Fix Andigilog aSC7621 detection.	302	Fix Andigilog aSC7621 support
3996 by khali Add Texas Instruments THMC51 detection.	303	Add Texas Instruments THMC51 support
3997 by khali Fix Analog Devices ADT7461 detection.	304	Fix Analog Devices ADT7461 support
3998 by khali Add VIA C7 detection. Patch from Juerg Haefliger.	305	Add VIA C7 support
3999 by khali We have a driver for the Winbond W83L786NR/NG/R/G now.	306	Fix Winbond W83L786NR/NG/R/G support (#2336)
4000 by khali Add Maxim MAX6646, MAX6647 and MAX6649 detection.	307	Add Maxim MAX6646/MAX6647/MAX6649 support
4002 by khali Add detection of VIA VT1212 and SMSC EMC2700LPC Super IOs.	308	Add VIA VT1212 support
	309	Add SMSC EMC2700LPC support
4036 by khali Map IT8720F to it87 driver.	310	Add ITE IT8720F support
4006 by khali An updated TMP411 datasheet actually shows that this chip has different	311	Add Texas Instruments TMP411 support
4021 by khali Prevent misdetection of W83627DHG (and more generally, Winbond chips)	312	Prevent misdetection of W83627DHG on I2C as LM78
4022 by khali W83627DHG has no subclients.	313	W83627DHG has no subclients
4023 by khali Add MAX1618 detection.	314	Add Maxim MAX1618 support
3979 by khali Add Intel SCH (bus) support.	315
3977 by khali Prepare for release.	316	3.0.2 (2008-05-18)
3960 by khali Delete the FAQ. It is now maintained on the wiki:	317	documentation: Delete the FAQ, now maintained on the wiki
3939 by khali Use __func__ instead of __FUNCTION__. The former is standard, the latter	318	libsensors: Use __func__ instead of __FUNCTION__
3944 by khali The configuration file is currently parsed in the locale set by the main	319	Parse the configuration file in C locale
3947 by khali We start at the end of the chip list, going backwards, and we want the	320	Late compute statements override early ones
3948 by khali Add support for virtual hwmon devices. This closes Red Hat bug #437637	321	Support virtual hwmon devices (#2309)
3955 by djwong Subject: [PATCH 1/3 v3] libsensors: Support energy and power meters	322	Support power and energy sensors
3976 by khali Fix support of multiple chip names on the command line. It got broken	323	Support DOS-style configuration files again (#2284)
3951 by khali Don't create the configuration file before it's needed.	324	pwmconfig: Don't create the configuration file before it's needed
	325	Don't preserve configuration file customizations
	326	Fix permissions of the configuration file
3952 by khali pwmconfig: Don't start if fancontrol is running.	327	Don't start if fancontrol is running (#2299)
	328	fancontrol: Don't start if already running (#2299)
	329	Delete fancontrol.pid at exit time (#2299)
3976 by khali Fix support of multiple chip names on the command line. It got broken	330	sensord: Fix support of multiple chip names on the command line (#2321)
3961 by khali Add SMSC SCH5127 detection. Patch from Juerg Haefliger.	331	sensors: Print energy and power sensors with automatically scaled units
3933 by khali Add SMSC SCH5027D detection. Patch from Juerg Haefliger.	332	sensors-detect: Add SMSC SCH5027D detection
3934 by khali Do not access I/O ports on PPC.	333	Do not access I/O ports on PPC
3935 by khali Move south bridge sensor detection to the right section.	334	Move south bridge sensor detection to the right section
3937 by jwrdegoede run chip_special_cases() earlier so that the special chips get added to the modules_supported list	335	Run chip_special_cases() earlier
3938 by khali New device ID for the SMSC SCH5317.	336	New device ID for the SMSC SCH5317
3967 by khali Add Asus F8000 detection.	337	Add SMSC SCH5127 detection
3963 by khali Add National Semiconductor LM64 detection.	338	Add National Semiconductor LM64 detection
3967 by khali Add Asus F8000 detection.	339	Add Asus F8000 detection
3968 by khali Add Intel ICH10 (bus) detection.	340	Add Intel ICH10 (bus) detection
3970 by khali Don't probe I2C addresses 0x40-0x47. We only probed them for the MAX6633,	341	Don't probe I2C addresses 0x40-0x47
3971 by khali Fix the parsing of I2C addresses not to scan.	342	Fix the parsing of I2C addresses not to scan
3972 by khali Try to detect 1-register-only devices, which are designed to be	343	Detect and skip 1-register-only I2C devices
3973 by khali Rework all device detection routines which use SMBus read word	344	Avoid SMBus word transactions where possible
3974 by khali Add Dallas DS1631 detection.	345	Add Dallas DS1631 detection
3933 by khali Add SMSC SCH5027D detection. Patch from Juerg Haefliger.	346
3931 by khali Prepare for release.	347	3.0.1 (2008-01-28)
3900 by khali Update the application writing guidelines:	348	documentation: Update the application writing guidelines
3917 by khali Get the device type from the subsystem symlink, rather than	349	libsensors: No longer depend on libsysfs (#2262)
	350	Don't guess the bus type from the device ID format (#2240)
3918 by khali Add support for drivers that place the hwmon attributes in the hwmon	351	Add support for attributes in the hwmon class device (#2260)
3896 by khali No warnings about ld configuration for staged installations, as these	352	Makefile: No warnings about ld configuration for staged installations
3926 by khali Document the variable overriding mechanism (#2296).	353	Document the variable overriding mechanism (#2296)
3902 by khali Really hide errors on sysfs writes.	354	pwmconfig: Really hide errors on sysfs writes
3902 by khali Really hide errors on sysfs writes.	355	Deal gracefully with read-only pwm_enable files
3903 by khali Warn about outputs found in automatic mode.	356	Warn about outputs found in automatic mode
3921 by khali Repeat available configuration options before prompt (#2289).	357	Repeat available configuration options before prompt (#2289)
3925 by khali Fix duplicate warning message when configuration file is broken.	358	Fix duplicate warning message when config file is broken
3924 by khali Detect improperly formatted FCTEMPS value (#2293).	359	fancontrol: Detect improperly formatted FCTEMPS value (#2293)
3906 by khali sensord: Fix rrd support (#2276).	360	sensord: Fix rrd support (#2276)
3907 by khali sensord: Use the same colors for daily and weekly charts.	361	Use the same colors for daily and weekly charts
3909 by khali sensord: Drop workaround needed by old versions of rrdtool. The bug	362	Drop workaround needed by old versions of rrdtool
3916 by khali Fix error path on library initialization error. Only call fclose() if	363	sensors: Fix error path on library initialization error
3911 by khali sensors.conf.eg: Fix voltage value references in compute statements. The	364	sensors.conf.eg: Fix voltage value references (g520sm, lm80, pc87366)
3895 by khali Drop detection of the Philips Semiconductors PCA9540. This is an I2C	365	sensors-detect: Drop PCA9540 detection
3913 by khali Improve sysconfig and modprobe.d integration, based on suggestions by	366	Improve sysconfig and modprobe.d integration
3919 by khali Add detection of the SMSC SCH5514 Super-IO. The chip doesn't contain	367	Add SMSC SCH5514D-NS detection (no sensors)
3920 by khali Lower the confidence value of the MAX6650/MAX6651 from 4 to 3.	368	Lower the confidence of MAX6650/MAX6651
3928 by khali Fix previous commit.	369	Add Fintek F71858DG detection
3928 by khali Fix previous commit.	370	Add Fintek F81216D detection (no sensors)
3914 by khali Add support for the 82801AA (ICH).	371	unhide_ICH_SMBus: Add support for the 82801AA (ICH)
3895 by khali Drop detection of the Philips Semiconductors PCA9540. This is an I2C	372
3891 by khali Release 3.0.0.	373	3.0.0 (2007-11-24)
3888 by khali Fix MODULE_DIR usage.	374	Makefile: Fix MODULE_DIR usage in etc
3891 by khali Release 3.0.0.	375	Fix build on PPC
3886 by khali pwmconfig: Better diagnostics in pwmdisable.	376	pwmconfig: Better diagnostics in pwmdisable
3887 by khali pwmconfig: Give the fans some time to spin up.	377	Give the fans some time to spin up
3881 by jwrdegoede sensors-detect: Add Texas Instruments TMP401 detection	378	sensors-detect: Add Texas Instruments TMP401 detection
3883 by khali Mention the f75375s driver. Reported by Christian Emmerich.	379	Mention the f75375s driver
3884 by khali sensors-detect: Add SMSC LPC47B367-NC detection. We have no datasheet,	380	Add SMSC LPC47B367-NC detection (no sensors)
3885 by khali Stop probing I2C addresses 0x20-0x27 for the LM78, LM79, W83781D and	381	Reduce w83781d/lm78 I2C address probing range
3897 by ruik Add Intel Celeron 4xx and Intel Core 2 CPUs on 45nm (Penryn) detection.	382	Add Intel Celeron 4xx and Penryn (CPU on 45nm) detection
3881 by jwrdegoede sensors-detect: Add Texas Instruments TMP401 detection	383
3880 by khali Release 3.0.0-rc3.	384	3.0.0-rc3 (2007-10-28)
3873 by khali Let libsensors know the default path to its configuration file.	385	libsensors: Add a default configuration file
3876 by khali Clean up if something goes wrong during initialization. Otherwise	386	Fix memory leaks on initialization error
3877 by khali Make the configuration file optional. Although in most cases it's not	387	Make the configuration file optional
3878 by khali Use /etc/sensors3.conf as the default configuration file. If it can't	388	Change the default configuration file to /etc/sensors3.conf
3866 by khali sensord: Reload config on SIGHUP rather than automatically.	389	sensord: Reload config on SIGHUP rather than automatically
3875 by khali "sensord" no longer needs a default configuration file name. If no	390	No default configuration file name
3868 by khali sensors: Fix file handle leak on library initialization error.	391	sensors: Fix file handle leak on library initialization error
3870 by khali sensors: Handle the case where voltage measurements aren't available.	392	Handle the case where voltage measurements aren't available
3874 by khali "sensors" no longer needs a default configuration file name. If no	393	No default configuration file name
3879 by khali Install sensors as sensors again.	394	Install as sensors again
3878 by khali Use /etc/sensors3.conf as the default configuration file. If it can't	395	sensors.conf.eg: Install as sensors3.conf
3862 by khali Fix SMSC LPC47B357/M967 detection. Patch from Juerg Haefliger.	396	sensors-detect: Fix SMSC LPC47B357/M967 detection
3863 by khali Rename fsc-specific chip arrays to something clearer.	397	Select the right driver for FSC chips
3867 by khali sensors-detect-stat.pl: Handle alternative chip lists.	398	sensors-detect-stat.pl: Handle alternative chip lists
3862 by khali Fix SMSC LPC47B357/M967 detection. Patch from Juerg Haefliger.	399
3857 by khali Prepare for 3.0.0-rc2 release.	400	3.0.0-rc2 (2007-10-10)
3854 by khali useful_addresses.html is in the wiki now.	401	useful_addresses.html: Moved to the wiki
3834 by khali Install sensors-conf-convert as part of "make install". Users may need to	402	Makefile: Add sensors-conf-convert to make install
3836 by khali libsensors: Notify the caller when writing a value fails.	403	libsensors: Notify the caller when writing a value fails
3837 by khali libsensors: Differentiate between different read error types.	404	Differentiate between different read error types
3840 by khali libsensors: Report I/O errors as such.	405	Report I/O errors as such
3831 by khali Log the error code on failure, to make it easier to investigate	406	sensord: Log the error code on failure
3850 by khali Update.	407	Drop the configuration file search path mechanism (#2259)
3850 by khali Update.	408	Manual page update
3833 by khali Fix spurious critical temperature alarm.	409	sensors: Fix spurious critical temperature alarm
3838 by khali sensors: Print error messages to stderr.	410	Print error messages to stderr
3839 by khali sensors: Make error messages more helpful and consistent.	411	Make error messages more helpful and consistent
3844 by khali sensors: Better handling of the fault flags.	412	Better handling of the fault flags
3835 by khali Add a short help text to sensors-conf-convert.	413	sensors-conf-convert: Add a short help text
3851 by khali Typo fix.	414	sensors-detect: Fix SMSC SCH311x detection
3852 by ruik Add detection of AMD K10 CPU sensor.	415	Add AMD K10 CPU sensor detection
3831 by khali Log the error code on failure, to make it easier to investigate	416
3827 by khali Reset the list of changes for 3.0.0-rc1. So many things changed	417	3.0.0-rc1 (2007-09-25)
141 by frodo New file CHANGES	418	Initial release