2
# Some generic MIPS tests
5
# When adding a new test to this file, try to do the following things:
7
# * If testing assembly and disassembly of code, don't forget to test
8
# the actual bit encodings of the instructions (using the
9
# --show-raw-insn flag to objdump).
11
# * Try to run the test for as many architectures as appropriate,
12
# using the "run_dump_test_arches" or "run_list_test_arches" functions,
13
# along with the output from a call to "mips_arch_list_matching."
15
# * Be sure to compare the test output before and after your testsuite
16
# changes, to verify that existing and new tests were run as expected.
17
# Look for expect ERROR messages in the testsuite .log file to make sure
18
# the new expect code did not contain errors.
20
# To add support for a new CPU to this file, add an appropriate entry
21
# to the sequence of "mips_arch_create" function calls below, and test
22
# the result. The new CPU should automatically be used when running
23
# various tests. If the new CPU is the default CPU for any tool
24
# targets, make sure the call to "mips_arch_create" reflects that fact.
27
# "LOSE" marks information about tests which fail at a particular point
28
# in time, but which are not XFAILed. Either they used to pass
29
# and indicate either regressions or the need to tweak the tests to keep
30
# up the with code, or they are new tests and it is unknown whether or not
31
# they should pass as-is for the given object formats.
34
# The functions below create and manipulate an "architecture data
35
# array" which contains entries for each MIPS architecture (or CPU)
36
# known to these tests. The array contains the following information
37
# for each architecture, indexed by the name of the architecture
38
# described by the entry:
40
# displayname: The name of the entry to be used for pretty-printing.
42
# gprsize: The size in bits of General Purpose Registers provided by
43
# the architecture (must be 32 or 64).
45
# props: A list of text strings which are associated with the
46
# architecture. These include the architecture name as well as
47
# information about what instructions the CPU supports. When matching
48
# based on properties, an additional property is added to the normal
49
# property list, "gpr<gprsize>" so that tests can match CPUs which
50
# have GPRs of a specific size. The following properties are most
51
# useful when matching properties for generic (i.e., not CPU-specific)
54
# mips1, mips2, mips3, mips4, mips5, mips32, mips64
55
# The architecture includes the instructions defined
58
# fpisa3, fpisa4, fpisa5
59
# The architecture includes the floating-point
60
# instructions defined by that MIPS ISA.
63
# The architecture interlocks GPRs accesses. (That is,
64
# there are no load delay slots.)
66
# mips3d The architecture includes the MIPS-3D ASE.
68
# ror The architecture includes hardware rotate instructions.
71
# The architecture provides 32- or 64-bit General Purpose
74
# as_flags: The assembler flags used when assembling tests for this
77
# objdump_flags: The objdump flags used when disassembling tests for
80
# Most entries in the architecture array will have values in all of
81
# the fields above. One entry, "default" represents the default CPU
82
# based on the target of the assembler being built. If always has
83
# empty "as_flags" and "objdump_flags."
87
# This function initializes the architecture data array ("mips_arches")
89
proc mips_arch_init {} {
92
# Catch because the variable won't be set the first time through.
93
catch {unset mips_arches}
96
# mips_arch_create ARCH GPRSIZE EXTENDS PROPS AS_FLAGS OBJDUMP_FLAGS \
97
# (optional:) DEFAULT_FOR_TARGETS
99
# This function creates a new entry in the architecture data array,
100
# for the architecture or CPU named ARCH, and fills in the entry
101
# according to the rest of the arguments.
103
# The new entry's property list is initialized to contain ARCH, any
104
# properties specified by PROPS, and the properties associated with
105
# the entry specified by EXTENDS. (The new architecture is considered
106
# to extend the capabilities provided by that architecture.)
108
# If DEFAULT_FOR_TARGETS is specified, it is a list of targets for which
109
# this architecture is the default architecture. If "istarget" returns
110
# true for any of the targets in the list, a "default" entry will be
111
# added to the architecture array which indicates that ARCH is the default
113
proc mips_arch_create {arch gprsize extends props as_flags objdump_flags
114
{default_for_targets {}}} {
117
if { [info exists mips_arches($arch)] } {
118
error "mips_arch_create: arch \"$arch\" already exists"
120
if { $gprsize != 32 && $gprsize != 64 } {
121
error "mips_arch_create: invalid GPR size $gprsize"
124
set archdata(displayname) $arch
125
set archdata(gprsize) $gprsize
126
set archdata(as_flags) $as_flags
127
set archdata(objdump_flags) $objdump_flags
128
set archdata(props) $arch
129
eval lappend archdata(props) $props
130
if { [string length $extends] != 0 } {
131
eval lappend archdata(props) [mips_arch_properties $extends 0]
134
set mips_arches($arch) [array get archdata]
136
# Set as default if appropriate.
137
foreach target $default_for_targets {
138
if { [istarget $target] } {
139
if { [info exists mips_arches(default)] } {
140
error "mips_arch_create: default arch already exists"
143
set archdata(displayname) "default = $arch"
144
set archdata(as_flags) ""
145
set archdata(objdump_flags) ""
147
set mips_arches(default) [array get archdata]
153
# mips_arch_destroy ARCH
155
# The opposite of the above. This function removes an entry from
156
# the architecture data array, for the architecture or CPU named ARCH.
158
proc mips_arch_destroy {arch} {
161
if { [info exists mips_arches($arch)] } {
162
unset mips_arches($arch)
168
# This function returns the list of all names of entries in the
169
# architecture data array (including the default entry, if a default
171
proc mips_arch_list_all {} {
173
return [lsort -dictionary [array names mips_arches]]
176
# mips_arch_data ARCH
178
# This function returns the information associated with ARCH
179
# in the architecture data array, in "array get" form.
180
proc mips_arch_data {arch} {
183
if { ! [info exists mips_arches($arch)] } {
184
error "mips_arch_data: unknown arch \"$arch\""
186
return $mips_arches($arch)
189
# mips_arch_displayname ARCH
191
# This function returns the printable name associated with ARCH in
192
# the architecture data array.
193
proc mips_arch_displayname {arch} {
194
array set archdata [mips_arch_data $arch]
195
return $archdata(displayname)
198
# mips_arch_properties ARCH (optional:) INCLUDE_GPRSIZE
200
# This function returns the property list associated with ARCH in the
201
# architecture data array, including the "canonical" target name as the
204
# If INCLUDE_GPRSIZE is non-zero, an additional "gpr32" or "gpr64"
205
# property will be returned as part of the list based on the
206
# architecture's GPR size.
207
proc mips_arch_properties {arch {include_gprsize 1}} {
208
array set archdata [mips_arch_data $arch]
209
set props $archdata(props)
210
if { $include_gprsize } {
211
lappend props gpr$archdata(gprsize)
216
# mips_arch_as_flags ARCH
218
# This function returns the assembler flags associated with ARCH in
219
# the architecture data array.
220
proc mips_arch_as_flags {arch} {
221
array set archdata [mips_arch_data $arch]
222
return $archdata(as_flags)
225
# mips_arch_objdump_flags ARCH
227
# This function returns the objdump disassembly flags associated with
228
# ARCH in the architecture data array.
229
proc mips_arch_objdump_flags {arch} {
230
array set archdata [mips_arch_data $arch]
231
return $archdata(objdump_flags)
234
# mips_arch_matches ARCH PROPMATCHLIST
236
# This function returns non-zero if ARCH matches the set of properties
237
# described by PROPMATCHLIST. Each entry in PROPMATCHLIST can either
238
# be the name of a property which must be matched, or "!" followed by
239
# the name of a property which must not be matched. ARCH matches
240
# PROPMATCHLIST if and only if all of the conditions specified by
241
# PROPMATCHLIST are satisfied.
242
proc mips_arch_matches {arch propmatchlist} {
243
foreach pm $propmatchlist {
244
if { [string match {!*} $pm] } {
247
set p [string range $pm 1 end]
249
# fail if not present.
254
set loc [lsearch -exact [mips_arch_properties $arch] $p]
256
# required-absent and found, or required-present and not found: fail.
257
if { ($inverted && $loc != -1) || (! $inverted && $loc == -1) } {
264
# mips_arch_list_matching ARGS
266
# This function returns a list of all architectures which match
267
# the conditions described by its arguments. Its arguments are
268
# taken as a list and used as the PROPMATCHLIST in a call to
269
# "mips_arch_matches" for each known architecture.
270
proc mips_arch_list_matching {args} {
272
foreach arch [mips_arch_list_all] {
273
# For now, don't match default arch until we know what its
274
# properties actually are.
275
if { [string compare $arch default] == 0
276
&& [string length [mips_arch_properties default]] == 0} {
279
if { [mips_arch_matches $arch $args] } {
287
# The functions below facilitate running various types of tests.
289
# run_dump_test_arch NAME ARCH
291
# Invoke "run_dump_test" for test NAME, with extra assembler and
292
# disassembler flags to test architecture ARCH.
294
# You can override the expected output for particular architectures
295
# and file formats. The possible test names are, in order of preference:
297
# 1. CARCH@FORMAT@NAME.d
302
# where CARCH is the "canonical" name of architecture ARCH as recorded
303
# in its associated property list, and where FORMAT is the target's
304
# file format (one of "elf", "ecoff" or "aout").
305
proc run_dump_test_arch { name arch } {
306
upvar elf elf ecoff ecoff aout aout
309
set format [expr { $elf ? "elf" : $ecoff ? "ecoff" : "aout" }]
310
set proparch [lindex [mips_arch_properties $arch 0] 0]
311
foreach prefix [list ${proparch}@${format}@ ${proparch}@ ${format}@] {
312
set archname ${prefix}${name}
313
if { [file exists "$srcdir/$subdir/${archname}.d"] } {
319
if [catch {run_dump_test $name \
320
"{name {([mips_arch_displayname $arch])}}
321
{objdump {[mips_arch_objdump_flags $arch]}}
322
{as {[mips_arch_as_flags $arch]}}"} rv] {
324
untested "$subdir/$name ($arch)"
328
# run_dump_test_arches NAME ARCH_LIST
330
# Invoke "run_dump_test_arch" for test NAME, for each architecture
331
# listed in ARCH_LIST.
332
proc run_dump_test_arches { name arch_list } {
333
upvar elf elf ecoff ecoff aout aout
334
foreach arch $arch_list {
335
run_dump_test_arch "$name" "$arch"
339
# run_list_test_arch NAME OPTS ARCH
341
# Invoke "run_list_test" for test NAME with options OPTS, with extra
342
# assembler flags to test architecture ARCH.
343
proc run_list_test_arch { name opts arch } {
346
set testname "MIPS $name ([mips_arch_displayname $arch])"
347
if [catch {run_list_test "$name" "$opts [mips_arch_as_flags $arch]" \
354
# run_list_test_arches NAME OPTS ARCH_LIST
356
# Invoke "run_list_test_arch" for test NAME with options OPTS, for each
357
# architecture listed in ARCH_LIST.
358
proc run_list_test_arches { name opts arch_list } {
359
foreach arch $arch_list {
360
run_list_test_arch "$name" "$opts" "$arch"
365
# Create the architecture data array by providing data for all
366
# known architectures.
368
# Note that several targets pick default CPU based on ABI. We
369
# can't easily handle that; do NOT list those targets as defaulting
370
# to any architecture.
372
mips_arch_create mips1 32 {} {} \
373
{ -march=mips1 -mtune=mips1 } { -mmips:3000 }
374
mips_arch_create mips2 32 mips1 { gpr_ilocks } \
375
{ -march=mips2 -mtune=mips2 } { -mmips:6000 }
376
mips_arch_create mips3 64 mips2 { fpisa3 } \
377
{ -march=mips3 -mtune=mips3 } { -mmips:4000 }
378
mips_arch_create mips4 64 mips3 { fpisa4 } \
379
{ -march=mips4 -mtune=mips4 } { -mmips:8000 }
380
mips_arch_create mips5 64 mips4 { fpisa5 } \
381
{ -march=mips5 -mtune=mips5 } { -mmips:mips5 }
382
mips_arch_create mips32 32 mips2 {} \
383
{ -march=mips32 -mtune=mips32 } { -mmips:isa32 } \
384
{ mipsisa32-*-* mipsisa32el-*-* }
385
mips_arch_create mips32r2 32 mips32 { fpisa3 fpisa4 fpisa5 ror } \
386
{ -march=mips32r2 -mtune=mips32r2 } \
388
{ mipsisa32r2-*-* mipsisa32r2el-*-* }
389
mips_arch_create mips64 64 mips5 { mips32 } \
390
{ -march=mips64 -mtune=mips64 } { -mmips:isa64 } \
391
{ mipsisa64-*-* mipsisa64el-*-* }
392
mips_arch_create mips64r2 64 mips64 { mips32r2 ror } \
393
{ -march=mips64r2 -mtune=mips64r2 } \
395
{ mipsisa64r2-*-* mipsisa64r2el-*-* }
396
mips_arch_create mips16 32 {} {} \
397
{ -march=mips1 -mips16 } { -mmips:16 }
398
mips_arch_create micromips 64 mips64r2 {} \
399
{ -march=mips64 -mmicromips } {}
400
mips_arch_create r3000 32 mips1 {} \
401
{ -march=r3000 -mtune=r3000 } { -mmips:3000 }
402
mips_arch_create r3900 32 mips1 { gpr_ilocks } \
403
{ -march=r3900 -mtune=r3900 } { -mmips:3900 } \
404
{ mipstx39-*-* mipstx39el-*-* }
405
mips_arch_create r4000 64 mips3 {} \
406
{ -march=r4000 -mtune=r4000 } { -mmips:4000 }
407
mips_arch_create vr5400 64 mips4 { ror } \
408
{ -march=vr5400 -mtune=vr5400 } { -mmips:5400 }
409
mips_arch_create sb1 64 mips64 { mips3d } \
410
{ -march=sb1 -mtune=sb1 } { -mmips:sb1 } \
411
{ mipsisa64sb1-*-* mipsisa64sb1el-*-* }
412
mips_arch_create octeon 64 mips64r2 {} \
413
{ -march=octeon -mtune=octeon } { -mmips:octeon } \
414
{ mips64octeon*-*-* }
415
mips_arch_create xlr 64 mips64 {} \
416
{ -march=xlr -mtune=xlr } { -mmips:xlr }
419
# And now begin the actual tests! VxWorks uses RELA rather than REL
420
# relocations, so most of the generic dump tests will not work there.
422
if { [istarget mips*-*-vxworks*] } {
423
run_dump_test "vxworks1"
424
run_dump_test "vxworks1-xgot"
425
run_dump_test "vxworks1-el"
426
run_dump_test "vxworks1-xgot-el"
427
} elseif { [istarget mips*-*-*] } {
428
set elf [expr [istarget *-*-elf*] || [istarget *-*-irix5*] || [istarget *-*-irix6* ] || [istarget *-*-linux*] || [istarget *-*-netbsd*] ]
429
set ecoff [expr [istarget *-*-ecoff*] || [istarget *-*-ultrix*] || [istarget *-*-irix\[1-4\]*] ]
430
set aout [expr [istarget *-*-bsd*] || [istarget *-*-openbsd*] ]
431
set addr32 [expr [istarget mipstx39*-*-*] || [istarget mips-*-linux*] || [istarget mipsel-*-linux*] || [istarget mips*-*-ecoff]]
432
set has_newabi [expr [istarget *-*-irix6*] || [istarget mips64*-*-linux*]]
433
set no_mips16 [expr !$elf]
434
set no_micromips [expr !$elf]
436
if { [istarget "mips*-*-*linux*"] || [istarget "mips*-sde-elf*"] } then {
441
if [istarget mips*el-*-*] {
447
mips_arch_destroy mips16
449
if { $no_micromips } {
450
mips_arch_destroy micromips
453
run_dump_test_arches "abs" [mips_arch_list_matching mips1]
454
run_dump_test_arches "add" [mips_arch_list_matching mips1]
455
run_dump_test_arches "and" [mips_arch_list_matching mips1]
456
run_dump_test_arches "mips1-fp" [mips_arch_list_matching mips1]
457
run_list_test_arches "mips1-fp" "-32 -msoft-float" \
458
[mips_arch_list_matching mips1]
459
run_dump_test "break20"
460
run_dump_test "trap20"
462
# LOSE: As of 2002-02-08, "beq" through "bltu" fail for target mips-ecoff.
463
# See http://sources.redhat.com/ml/binutils/2001-10/msg00418.html for
464
# more information. Not sure if the fixes there are correct; should
465
# branches to external labels be allowed for ECOFF?
466
run_dump_test_arches "beq" [mips_arch_list_matching mips1]
467
run_dump_test_arches "bge" [mips_arch_list_matching mips1]
468
run_dump_test_arches "bgeu" [mips_arch_list_matching mips1]
469
run_dump_test_arches "blt" [mips_arch_list_matching mips1]
470
run_dump_test_arches "bltu" [mips_arch_list_matching mips1]
471
run_dump_test_arches "branch-likely" [mips_arch_list_matching mips2]
472
run_dump_test_arches "branch-misc-1" [mips_arch_list_matching mips1]
473
run_dump_test_arches "branch-misc-2" [mips_arch_list_matching mips1]
474
run_dump_test_arches "branch-misc-2pic" [mips_arch_list_matching mips1]
475
run_dump_test_arches "branch-misc-2-64" [mips_arch_list_matching mips3]
476
run_dump_test_arches "branch-misc-2pic-64" [mips_arch_list_matching mips3]
477
run_dump_test "branch-misc-3"
478
run_dump_test "branch-swap"
482
run_dump_test_arches "dli" [mips_arch_list_matching mips3]
485
run_dump_test_arches "elf-jal" [mips_arch_list_matching mips1]
489
run_dump_test_arches "jal-mask-11" [mips_arch_list_matching mips1]
490
run_dump_test_arches "jal-mask-12" [mips_arch_list_matching mips1]
491
run_dump_test_arches "jal-mask-21" [mips_arch_list_matching micromips]
492
run_dump_test_arches "jal-mask-22" [mips_arch_list_matching micromips]
493
run_dump_test "eret-1"
494
run_dump_test "eret-2"
495
run_dump_test "eret-3"
496
run_dump_test_arches "24k-branch-delay-1" \
497
[mips_arch_list_matching mips1 !micromips]
498
run_dump_test_arches "24k-triple-stores-1" \
499
[mips_arch_list_matching fpisa5 !octeon !micromips]
500
run_dump_test_arches "24k-triple-stores-2" \
501
[mips_arch_list_matching mips2 !micromips]
502
run_dump_test_arches "24k-triple-stores-3" \
503
[mips_arch_list_matching mips2 !micromips]
504
run_dump_test_arches "24k-triple-stores-4" \
505
[mips_arch_list_matching mips2 !micromips]
506
run_dump_test_arches "24k-triple-stores-5" \
507
[mips_arch_list_matching mips1 !micromips]
508
run_dump_test_arches "24k-triple-stores-6" \
509
[mips_arch_list_matching mips2 !micromips]
510
run_dump_test_arches "24k-triple-stores-7" \
511
[mips_arch_list_matching mips2 !micromips]
512
run_dump_test_arches "24k-triple-stores-8" \
513
[mips_arch_list_matching mips1 !micromips]
514
run_dump_test_arches "24k-triple-stores-9" \
515
[mips_arch_list_matching mips1 !micromips]
516
run_dump_test_arches "24k-triple-stores-10" \
517
[mips_arch_list_matching mips1 !micromips]
519
run_dump_test_arches "24k-triple-stores-11" \
520
[mips_arch_list_matching mips1 !micromips]
524
run_dump_test_arches "jal-svr4pic" \
525
[mips_arch_list_matching mips1]
526
run_dump_test_arches "jal-svr4pic-noreorder" \
527
[mips_arch_list_matching mips1]
529
if $elf { run_dump_test "jal-xgot" }
530
run_list_test_arches "jal-range" "-32" [mips_arch_list_matching mips1]
531
if $has_newabi { run_dump_test "jal-newabi" }
532
if !$aout { run_dump_test "la" }
533
if $elf { run_dump_test "la-svr4pic" }
534
if $elf { run_dump_test "la-xgot" }
535
if $elf { run_dump_test "lca-svr4pic" }
536
if $elf { run_dump_test "lca-xgot" }
538
# XXX FIXME: Has mips2 and later insns with mips1 disassemblies.
539
# (Should split and then use appropriate arch lists.)
540
run_dump_test_arches "lb" [mips_arch_list_matching mips1 !mips2]
543
run_dump_test_arches "lb-svr4pic" \
544
[mips_arch_list_matching mips1 !gpr_ilocks]
545
run_dump_test_arches "lb-svr4pic-ilocks" [mips_arch_list_matching gpr_ilocks]
548
# Both versions specify the cpu, so we can run both regardless of
549
# the interlocking in the configured default cpu.
550
run_dump_test "lb-xgot"
551
run_dump_test "lb-xgot-ilocks"
554
run_dump_test_arches "ld" [mips_arch_list_matching mips1]
555
run_dump_test_arches "ld-forward" \
556
[mips_arch_list_matching mips1]
557
run_dump_test_arches "sd" [mips_arch_list_matching mips1]
558
run_dump_test_arches "sd-forward" \
559
[mips_arch_list_matching mips1]
560
run_dump_test_arches "l_d" [mips_arch_list_matching mips1]
561
run_dump_test_arches "l_d-forward" \
562
[mips_arch_list_matching mips1]
563
run_dump_test_arches "s_d" [mips_arch_list_matching mips1]
564
run_dump_test_arches "s_d-forward" \
565
[mips_arch_list_matching mips1]
566
run_dump_test_arches "ldc1" [mips_arch_list_matching mips2]
567
run_dump_test_arches "ldc1-forward" \
568
[mips_arch_list_matching mips2]
569
run_dump_test_arches "sdc1" [mips_arch_list_matching mips2]
570
run_dump_test_arches "sdc1-forward" \
571
[mips_arch_list_matching mips2]
573
run_dump_test_arches "ld-n32" \
574
[mips_arch_list_matching mips3]
575
run_dump_test_arches "ld-forward-n32" \
576
[mips_arch_list_matching mips3]
577
run_dump_test_arches "sd-n32" \
578
[mips_arch_list_matching mips3]
579
run_dump_test_arches "sd-forward-n32" \
580
[mips_arch_list_matching mips3]
581
run_dump_test_arches "l_d-n32" \
582
[mips_arch_list_matching mips3]
583
run_dump_test_arches "l_d-forward-n32" \
584
[mips_arch_list_matching mips3]
585
run_dump_test_arches "s_d-n32" \
586
[mips_arch_list_matching mips3]
587
run_dump_test_arches "s_d-forward-n32" \
588
[mips_arch_list_matching mips3]
589
run_dump_test_arches "ldc1-n32" \
590
[mips_arch_list_matching mips3]
591
run_dump_test_arches "ldc1-forward-n32" \
592
[mips_arch_list_matching mips3]
593
run_dump_test_arches "sdc1-n32" \
594
[mips_arch_list_matching mips3]
595
run_dump_test_arches "sdc1-forward-n32" \
596
[mips_arch_list_matching mips3]
597
run_dump_test_arches "ld-n64" \
598
[mips_arch_list_matching mips3]
599
run_dump_test_arches "ld-forward-n64" \
600
[mips_arch_list_matching mips3]
601
run_dump_test_arches "sd-n64" \
602
[mips_arch_list_matching mips3]
603
run_dump_test_arches "sd-forward-n64" \
604
[mips_arch_list_matching mips3]
605
run_dump_test_arches "l_d-n64" \
606
[mips_arch_list_matching mips3]
607
run_dump_test_arches "l_d-forward-n64" \
608
[mips_arch_list_matching mips3]
609
run_dump_test_arches "s_d-n64" \
610
[mips_arch_list_matching mips3]
611
run_dump_test_arches "s_d-forward-n64" \
612
[mips_arch_list_matching mips3]
613
run_dump_test_arches "ldc1-n64" \
614
[mips_arch_list_matching mips3]
615
run_dump_test_arches "ldc1-forward-n64" \
616
[mips_arch_list_matching mips3]
617
run_dump_test_arches "sdc1-n64" \
618
[mips_arch_list_matching mips3]
619
run_dump_test_arches "sdc1-forward-n64" \
620
[mips_arch_list_matching mips3]
623
if $elf { run_dump_test "ld-svr4pic" }
624
if $elf { run_dump_test "ld-xgot" }
625
run_dump_test_arches "li" [mips_arch_list_matching mips1]
626
if !$aout { run_dump_test "lifloat" }
627
if $elf { run_dump_test "lif-svr4pic" }
628
if $elf { run_dump_test "lif-xgot" }
629
run_dump_test_arches "mips4" [mips_arch_list_matching mips4]
630
run_dump_test_arches "mips4-fp" [mips_arch_list_matching fpisa4]
631
run_list_test_arches "mips4-fp" "-32 -msoft-float" \
632
[mips_arch_list_matching fpisa4]
633
run_dump_test_arches "mips4-branch-likely" \
634
[mips_arch_list_matching mips4]
635
run_list_test_arches "mips4-branch-likely" "-32 -msoft-float" \
636
[mips_arch_list_matching mips4]
637
run_dump_test_arches "mips5-fp" [mips_arch_list_matching fpisa5]
640
run_dump_test_arches "rol" [mips_arch_list_matching mips1 !ror]
641
run_dump_test_arches "rol-hw" [mips_arch_list_matching ror]
643
run_dump_test_arches "rol64" [mips_arch_list_matching gpr64 !ror]
644
run_dump_test_arches "rol64-hw" [mips_arch_list_matching gpr64 ror]
646
if !$aout { run_dump_test "sb" }
647
run_dump_test "trunc"
648
if !$aout { run_dump_test "ulh" }
649
run_dump_test_arches "ulh2-eb" [mips_arch_list_matching mips1]
650
run_dump_test_arches "ulh2-el" [mips_arch_list_matching mips1]
651
if $elf { run_dump_test "ulh-svr4pic" }
652
if $elf { run_dump_test "ulh-xgot" }
660
run_dump_test_arches "ulw2-eb" \
661
[mips_arch_list_matching mips1 !gpr_ilocks]
662
run_dump_test_arches "ulw2-eb-ilocks" [mips_arch_list_matching gpr_ilocks]
663
run_dump_test_arches "ulw2-el" \
664
[mips_arch_list_matching mips1 !gpr_ilocks]
665
run_dump_test_arches "ulw2-el-ilocks" [mips_arch_list_matching gpr_ilocks]
667
run_dump_test_arches "uld2-eb" [mips_arch_list_matching mips3]
668
run_dump_test_arches "uld2-el" [mips_arch_list_matching mips3]
670
# The mips16 test can only be run on ELF, because only ELF
671
# supports the necessary mips16 reloc.
672
if { $elf && !$no_mips16 } {
673
run_dump_test "mips16"
674
run_dump_test "mips16-64"
675
# Check MIPS16e extensions
676
run_dump_test_arches "mips16e" \
677
[mips_arch_list_matching mips32 !micromips]
678
# Check jalx handling
679
run_dump_test "mips16-jalx"
680
run_dump_test "mips-jalx"
681
run_dump_test "mips-jalx-2"
682
# Check MIPS16 HI16/LO16 relocations
683
run_dump_test "mips16-hilo"
685
run_dump_test "mips16-hilo-n32"
687
run_dump_test "mips16-hilo-match"
689
run_dump_test "delay"
690
run_dump_test "nodelay"
691
run_dump_test "mips4010"
692
run_dump_test "mips4650"
693
run_dump_test "mips4100"
694
run_dump_test "vr4111"
695
run_dump_test "vr4120"
696
run_dump_test "vr4120-2"
697
run_dump_test "vr4130"
698
run_dump_test "vr5400"
699
run_dump_test "vr5500"
700
run_dump_test "rm7000"
701
run_dump_test "perfcount"
702
run_dump_test "lineno"
705
run_dump_test_arches "mips32" [mips_arch_list_matching mips32]
706
run_dump_test_arches "mips32-imm" [mips_arch_list_matching mips32]
708
run_dump_test_arches "mips32-sf32" [mips_arch_list_matching mips32]
709
run_list_test_arches "mips32-sf32" "-32 -msoft-float" \
710
[mips_arch_list_matching mips32]
711
run_dump_test_arches "mips32-cp2" [mips_arch_list_matching mips32 \
714
run_dump_test_arches "mips32r2" [mips_arch_list_matching mips32r2]
715
run_dump_test_arches "mips32r2-cp2" [mips_arch_list_matching mips32r2 \
717
run_dump_test_arches "mips32r2-fp32" \
718
[mips_arch_list_matching mips32r2]
719
run_list_test_arches "mips32r2-fp32" "-32 -msoft-float" \
720
[mips_arch_list_matching mips32r2]
721
run_list_test_arches "mips32r2-ill" "-32" \
722
[mips_arch_list_matching mips32r2 gpr32]
723
run_list_test_arches "mips32r2-ill-fp64" "-mabi=o64" \
724
[mips_arch_list_matching mips32r2 gpr64]
725
run_list_test_arches "mips32r2-ill-nofp" "-32 -msoft-float" \
726
[mips_arch_list_matching mips32r2]
728
run_dump_test_arches "mips64" [mips_arch_list_matching mips64]
729
run_dump_test_arches "mips64-cp2" [mips_arch_list_matching mips64 \
732
run_dump_test_arches "mips64r2" [mips_arch_list_matching mips64r2]
733
run_list_test_arches "mips64r2-ill" "" [mips_arch_list_matching mips64r2]
735
run_dump_test "set-arch"
738
run_dump_test "mips64-mips3d"
739
run_dump_test_arches "mips64-mips3d-incl" [mips_arch_list_matching mips3d]
741
run_dump_test "mips64-mdmx"
742
run_dump_test "sb1-ext-mdmx"
743
run_dump_test "sb1-ext-ps"
744
run_dump_test "xlr-ext"
747
run_dump_test_arches "relax" [mips_arch_list_matching mips2]
748
run_dump_test_arches "relax-at" [mips_arch_list_matching mips2]
749
run_dump_test "relax-swap1-mips1"
750
run_dump_test "relax-swap1-mips2"
751
run_dump_test "relax-swap2"
752
run_dump_test_arches "relax-swap3" [mips_arch_list_all]
753
run_list_test_arches "relax-bposge" "-mdsp -relax-branch" \
754
[mips_arch_list_matching mips64r2 \
757
run_list_test "illegal" "-32"
758
run_list_test "baddata1" "-32"
759
run_list_test "jalr" ""
761
# LOSE: As of 2002-02-08, the next 4 tests fail for target mips-ecoff.
762
# It's unknown whether they _should_ pass as-is, or whether different
763
# variants are needed for ELF and ECOFF.
764
run_dump_test "mips-gp32-fp32"
765
run_dump_test "mips-gp32-fp64"
766
run_dump_test "mips-gp64-fp32"
767
run_dump_test "mips-gp64-fp64"
770
# Make sure that -mcpu=FOO and -mFOO are equivalent. Assemble a file
771
# containing 4650-specific instructions with -m4650 and -mcpu=4650,
772
# and verify that they're the same. Specifically, we're checking
773
# that the EF_MIPS_MACH field is set, and that the 4650 'mul'
774
# instruction does get used. In previous versions of GAS,
775
# only -mcpu=4650 would set the EF_MIPS_MACH field; -m4650 wouldn't.
776
run_dump_test "elf_e_flags1"
777
run_dump_test "elf_e_flags2"
778
run_dump_test "elf_e_flags3"
779
run_dump_test "elf_e_flags4"
781
# Check EF_MIPS_ARCH markings for each supported architecture.
782
run_dump_test "elf_arch_mips1"
783
run_dump_test "elf_arch_mips2"
784
run_dump_test "elf_arch_mips3"
785
run_dump_test "elf_arch_mips4"
786
run_dump_test "elf_arch_mips5"
787
run_dump_test "elf_arch_mips32"
788
run_dump_test "elf_arch_mips32r2"
789
run_dump_test "elf_arch_mips64"
790
run_dump_test "elf_arch_mips64r2"
792
# Verify that ASE markings are handled properly.
794
run_dump_test "elf_ase_mips16"
795
run_dump_test "elf_ase_mips16-2"
797
if { !$no_micromips } {
798
run_dump_test "elf_ase_micromips"
799
run_dump_test "elf_ase_micromips-2"
802
run_dump_test "mips-gp32-fp32-pic"
803
run_dump_test "mips-gp32-fp64-pic"
804
run_dump_test "mips-gp64-fp32-pic"
805
run_dump_test "mips-gp64-fp64-pic"
807
run_dump_test "mips-abi32"
808
run_dump_test "mips-abi32-pic"
809
run_dump_test "mips-abi32-pic2"
811
run_dump_test "elf${el}-rel"
812
run_dump_test_arches "elf${el}-rel2" [mips_arch_list_matching gpr64]
813
run_dump_test "e32${el}-rel2"
814
run_dump_test "elf${el}-rel3"
815
run_dump_test_arches "elf-rel4" [mips_arch_list_matching gpr64]
816
run_dump_test "e32-rel4"
817
run_dump_test "elf-rel5"
818
run_dump_test "elf-rel6"
820
run_dump_test "elf-rel6-n32"
821
run_dump_test "elf-rel6-n64"
823
run_dump_test "elf-rel7"
824
run_dump_test "elf-rel8"
825
run_dump_test "elf-rel8-mips16"
826
run_dump_test "elf-rel9"
827
run_dump_test "elf-rel9-mips16"
829
run_dump_test "elf-rel10"
830
run_dump_test "elf-rel11"
832
run_dump_test "elf-rel12"
833
run_dump_test "elf-rel13"
834
run_dump_test "elf-rel13-mips16"
835
run_dump_test "elf-rel14"
838
run_dump_test "elf-rel15"
839
run_dump_test "elf-rel16"
841
run_dump_test "elf-rel-got-n32"
842
run_dump_test "elf-rel-xgot-n32"
843
run_dump_test "elf-rel-got-n64"
844
run_dump_test "elf-rel-xgot-n64"
846
run_dump_test "elf-rel17"
848
run_dump_test "elf-rel18"
850
run_dump_test "elf-rel19"
851
run_dump_test "elf-rel20"
853
run_dump_test "elf-rel21"
854
run_dump_test "elf-rel22"
855
run_dump_test "elf-rel23"
856
run_dump_test "elf-rel23a"
857
run_dump_test "elf-rel23b"
858
run_dump_test "elf-rel24"
861
run_dump_test "elf-rel25"
862
run_dump_test "elf-rel25a"
863
run_dump_test "elf-rel26"
865
run_dump_test_arches "elf-rel27" [mips_arch_list_all]
868
run_dump_test "elf-rel28-n32"
869
run_dump_test "elf-rel28-n64"
873
run_dump_test "${tmips}mips${el}16-e"
874
run_dump_test "${tmips}mips${el}16-f"
876
run_dump_test "elf-consthilo"
877
run_dump_test "expr1"
879
run_list_test "tls-ill" "-32"
880
run_dump_test "tls-o32"
881
run_dump_test "tls-relw"
882
run_dump_test "jalr2"
884
run_dump_test_arches "aent" [mips_arch_list_matching mips1]
886
run_dump_test_arches "branch-misc-4" \
887
[mips_arch_list_matching mips1]
888
run_dump_test_arches "branch-misc-4-64" \
889
[mips_arch_list_matching mips3]
891
run_dump_test_arches "loc-swap" [mips_arch_list_all]
892
run_dump_test_arches "loc-swap-dis" \
894
run_dump_test_arches "loc-swap-2" [mips_arch_list_all]
898
run_dump_test "n32-consec"
901
# tests of objdump's ability to disassemble using different
903
run_dump_test "gpr-names-numeric"
904
run_dump_test "gpr-names-32"
905
run_dump_test "gpr-names-n32"
906
run_dump_test "gpr-names-64"
908
run_dump_test "fpr-names-numeric"
909
run_dump_test "fpr-names-32"
910
run_dump_test "fpr-names-n32"
911
run_dump_test "fpr-names-64"
913
run_dump_test "cp0-names-numeric"
914
run_dump_test "cp0-names-r3000"
915
run_dump_test "cp0-names-r4000" \
916
{ { {name} {(r4000)} } { {objdump} {-M cp0-names=r4000} } }
917
run_dump_test "cp0-names-r4000" \
918
{ { {name} {(r4400)} } { {objdump} {-M cp0-names=r4400} } }
919
run_dump_test "cp0-names-mips32"
920
run_dump_test "cp0-names-mips32r2"
921
run_dump_test "cp0-names-mips64"
922
run_dump_test "cp0-names-mips64r2"
923
run_dump_test "cp0-names-sb1"
925
run_dump_test "cp0sel-names-numeric"
926
run_dump_test "cp0sel-names-mips32"
927
run_dump_test "cp0sel-names-mips32r2"
928
run_dump_test "cp0sel-names-mips64"
929
run_dump_test "cp0sel-names-mips64r2"
930
run_dump_test "cp0sel-names-sb1"
932
run_dump_test "hwr-names-numeric"
933
run_dump_test "hwr-names-mips32r2"
934
run_dump_test "hwr-names-mips64r2"
936
run_dump_test "ldstla-32"
937
run_dump_test "ldstla-32-mips3"
938
run_dump_test "ldstla-32-shared"
939
run_dump_test "ldstla-32-mips3-shared"
940
run_list_test "ldstla-32-1" "-mabi=32" \
941
"MIPS ld-st-la bad constants (ABI o32)"
942
run_list_test "ldstla-32-mips3-1" "-mabi=32" \
943
"MIPS ld-st-la bad constants (ABI o32, mips3)"
944
run_list_test "ldstla-32-1" "-KPIC -mabi=32" \
945
"MIPS ld-st-la bad constants (ABI o32, shared)"
946
run_list_test "ldstla-32-mips3-1" "-KPIC -mabi=32" \
947
"MIPS ld-st-la bad constants (ABI o32, mips3, shared)"
948
run_dump_test "ldstla-eabi64"
950
run_dump_test "ldstla-n64"
951
run_dump_test "ldstla-n64-shared"
952
run_dump_test "ldstla-n64-sym32"
955
run_dump_test "macro-warn-1"
956
run_dump_test "macro-warn-2"
957
run_dump_test "macro-warn-3"
958
run_dump_test "macro-warn-4"
960
run_dump_test "macro-warn-1-n32"
961
run_dump_test "macro-warn-2-n32"
964
run_dump_test "noat-1"
965
run_list_test "noat-2" ""
966
run_list_test "noat-3" ""
967
run_list_test "noat-4" ""
968
run_list_test "noat-5" ""
969
run_list_test "noat-6" ""
970
run_list_test "noat-7" ""
973
run_list_test "at-2" "-32 -mips1" "MIPS at-2"
975
run_dump_test "loongson-2e"
976
run_dump_test "loongson-2f"
977
run_dump_test "loongson-2f-2"
978
run_dump_test "loongson-2f-3"
980
run_dump_test "loongson-3a"
981
run_dump_test "loongson-3a-2"
982
run_dump_test "loongson-3a-3"
984
run_dump_test_arches "octeon" [mips_arch_list_matching octeon]
985
run_list_test_arches "octeon-ill" "" \
986
[mips_arch_list_matching octeon]
987
run_dump_test_arches "octeon-pref" [mips_arch_list_matching octeon]
989
run_dump_test "smartmips"
990
run_dump_test "mips32-dsp"
991
run_dump_test "mips32-dspr2"
992
run_dump_test "mips64-dsp"
993
run_dump_test "mips32-mt"
995
if { $elf && !$no_mips16 } {
996
run_dump_test "mips16-dwarf2"
998
run_dump_test "mips16-dwarf2-n32"
1001
if { !$no_mips16 } {
1002
run_dump_test "mips16e-jrc"
1003
run_dump_test "mips16e-save"
1004
run_dump_test "mips16e-64"
1005
run_list_test "mips16e-64" "-march=mips32 -32"
1006
run_dump_test "mips16-intermix"
1008
run_dump_test "vxworks1"
1009
run_dump_test "vxworks1-xgot"
1010
run_dump_test "vxworks1-el"
1011
run_dump_test "vxworks1-xgot-el"
1013
run_dump_test "noreorder"
1014
run_dump_test "align"
1015
run_dump_test "align2"
1016
run_dump_test "align2-el"
1017
run_dump_test "odd-float"
1019
run_list_test_arches "mips-macro-ill-sfp" "-32 -msingle-float" \
1020
[mips_arch_list_matching mips2]
1021
run_list_test_arches "mips-macro-ill-nofp" "-32 -msoft-float" \
1022
[mips_arch_list_matching mips2]
1024
run_list_test_arches "mips-hard-float-flag" \
1025
"-32 -msoft-float -mhard-float" \
1026
[mips_arch_list_matching mips1]
1027
run_list_test_arches "mips-double-float-flag" \
1028
"-32 -msingle-float -mdouble-float" \
1029
[mips_arch_list_matching mips1]
1031
run_dump_test "mips16-vis-1"
1032
run_dump_test "call-nonpic-1"
1033
run_dump_test "mips32-sync"
1034
run_dump_test_arches "mips32r2-sync" \
1035
[mips_arch_list_matching mips32r2]
1036
run_dump_test_arches "alnv_ps-swap" [mips_arch_list_matching fpisa5]
1037
run_dump_test_arches "cache" [lsort -dictionary -unique [concat \
1038
[mips_arch_list_matching mips3] \
1039
[mips_arch_list_matching mips32] ] ]
1040
run_dump_test_arches "daddi" [mips_arch_list_matching mips3]
1041
run_dump_test_arches "pref" [lsort -dictionary -unique [concat \
1042
[mips_arch_list_matching mips4] \
1043
[mips_arch_list_matching mips32] ] ]
1045
if $has_newabi { run_dump_test "cfi-n64-1" }
1047
run_dump_test "pr12915"
1048
run_dump_test "reginfo-1a"
1049
run_dump_test "reginfo-1b"
1051
if { !$no_micromips } {
1052
run_dump_test "micromips"
1053
run_dump_test "micromips-trap"
1054
run_list_test "micromips-size-0" \
1055
"-32 -march=mips64 -mmicromips" "microMIPS instruction size 0"
1056
run_dump_test "micromips-size-1"
1057
run_dump_test "micromips-branch-relax"
1058
run_dump_test "micromips-branch-relax-pic"
1059
run_dump_test "micromips-branch-delay"
1062
run_dump_test_arches "mcu" [mips_arch_list_matching mips32r2 \
added
removed
src/binutils/gas/testsuite/gas/mips/mips.exp
