~toykeeper/flashlight-firmware/fsm : changes

~toykeeper/flashlight-firmware/fsm » Changes from revision 483.12.140

Rev	Summary	Authors	Date
483.12.140	converted noctigon-m44 to use PWM+DSM instead of PWM+PFM (dy... converted noctigon-m44 to use PWM+DSM instead of PWM+PFM (dynamic PWM) (this gives better, smoother low modes and reduced flicker)	Selene ToyKeeper	1 year ago
483.12.139	converted gchart-fet1-t1616 to new API converted gchart-fet1-t1616 to new API (is almost identical to a wurkkos-ts10)	Selene ToyKeeper	1 year ago
483.12.138	converted blf-q8-t1616 to new API, using wurkkos-ts10 and wu... converted blf-q8-t1616 to new API, using wurkkos-ts10 and wurkkos-ts25 as a base (since the Q8 driver was the direct predecessor to those Wurkkos drivers, they're almost identical)	Selene ToyKeeper	1 year ago
483.12.137	converted noctigon-kr4-boost to new API converted noctigon-kr4-boost to new API (it's almost identical to noctigon-dm11-boost)	Selene ToyKeeper	1 year ago
483.12.136	fixed blf-q8 build (was 6 bytes too big) fixed blf-q8 build (was 6 bytes too big)	Selene ToyKeeper	1 year ago
483.12.135	fixed emisar-d1v2 builds (only needed a simple one-liner) fixed emisar-d1v2 builds (only needed a simple one-liner)	Selene ToyKeeper	1 year ago
483.12.134	minor comment cleanup minor comment cleanup	Selene ToyKeeper	1 year ago
483.12.133	converted Sofirn LT1-t1616 to new API, using SiteRelEnby's b... converted Sofirn LT1-t1616 to new API, using SiteRelEnby's branch for reference (needs further updates though, to improve ramping, since this version is basically a straight conversion of the old t85 code with 8-bit ramps)	Selene ToyKeeper	1 year ago
483.12.132	converted blf-gt-mini to new API converted blf-gt-mini to new API	Selene ToyKeeper	1 year ago
483.12.131	improved blf-lt1 ramp and fixed issue with missed button pre... improved blf-lt1 ramp and fixed issue with missed button presses (it seems t85 doesn't like having timer overflow interrupts enabled in standby?)	Selene ToyKeeper	1 year ago
483.12.130	rewrote blf-lantern (blf-lt1) code to use multi-channel and ... rewrote blf-lantern (blf-lt1) code to use multi-channel and PWM+DSM, which required ... a few pretty significant changes: - no dynamic underclocking (it isn't compatible with DSM yet) - no tint ramping brightness correction (removed to save space) - removed ramp blinks (to save space, and because they're annoying) - removed momentary mode (to save space) - removed SOS mode (to save space) - removed (to save space) some other relatively recent features which weren't present in the original production firmware ... but some other things improved: + added smooth steps + extended Simple UI + added stepped tint ramping + added 13H factory reset, to save wear on threads + lower lows + smoother ramp + much higher tint ramp resolution in low modes I'm not entirely happy with this yet, so it probably needs additional work later in order to adjust the weird ramp shape (these 7135 chips have a weird response curve), add dynamic underclocking, cut down the ROM size if possible, re-add tint ramping brightness correction, etc. Multi-channel stuff in particular added a lot to the size. This is a pretty big change from the previous working build, so some users may want to stick with the last pre-multi-channel version. Non-trivial sacrifices were made to bring in more recent features.	Selene ToyKeeper	1 year ago
483.12.129	fixed emisar-d1 + emisar-d1s fixed emisar-d1 + emisar-d1s	Selene ToyKeeper	1 year ago
483.12.128	fixed bug: smooth ramp from turbo down to ceiling caused fli... fixed bug: smooth ramp from turbo down to ceiling caused flickering when smooth_steps was enabled	Selene ToyKeeper	1 year ago
483.12.127	rewrote emisar-d4k-3ch to use delta-sigma modulation (PWM + ... rewrote emisar-d4k-3ch to use delta-sigma modulation (PWM + DSM), which gives much better resolution, especially for the 8-bit channel. Also... - set_channel_mode() aborts when going from/to the same channel, to avoid unnecessary flicker - hsv2rgb() uses 16-bit R/G/B and V now - changed default channel to All - reduced default channel modes to just A, B, C, and All - smooth ramp floor defaults to 1/150 - raised level when aux LEDs turn on high during use (for better compatibility with red main LEDs)	Selene ToyKeeper	1 year ago
483.12.126	misc comments, spacing, documentation misc comments, spacing, documentation	Selene ToyKeeper	1 year ago
483.12.125	fixed RGB aux colors being off by one fixed RGB aux colors being off by one (bug introduced in r772, when adding AA/NiMH RGB voltage support)	Selene ToyKeeper	1 year ago
483.12.124	emisar-d4: added smooth steps and tactical mode, reduced ram... emisar-d4: added smooth steps and tactical mode, reduced ramp bump, removed SOS mode to make room for other stuff	Selene ToyKeeper	1 year ago
483.12.123	converted mateminco-mf01-mini build to new API converted mateminco-mf01-mini build to new API	Selene ToyKeeper	1 year ago
483.12.122	fix failed builds without USE_RAMP_AFTER_MOON_CONFIG fix failed builds without USE_RAMP_AFTER_MOON_CONFIG	Selene ToyKeeper	1 year ago
483.12.121	converted FW3A to new API converted FW3A to new API (my FW3A dev host is dead though, so the DD FET channel isn't 100% confirmed to work ... will have to solder together a new dev host at some point)	Selene ToyKeeper	1 year ago

Older »