~ubuntu-branches/debian/jessie/bootcd/jessie : changes

~ubuntu-branches/debian/jessie/bootcd/jessie » Changes from revision 28

From Revision 28 to 9

Rev	Summary	Authors	Tags	Date
28	* bootcd now depends on syslinux-common and recommends isoli... * bootcd now depends on syslinux-common and recommends isolinux (it does not depend on isolinux, because it is not available on wheezy and before) , closes: #760831 * now using mkzftree with option -p as suggested by Alberto Marmodoro <marmodoro@libero.it> * adding /usr/lib/syslinux/modules/bios/ldlinux.c32 to isolinux if installed by syslinux-common, closes: #760835	Bernd Schumacher	4.05	9 years ago
27	Fixed little typo Bug which was no problem on wheezy before.... Fixed little typo Bug which was no problem on wheezy before. Closes: #738410	Bernd Schumacher	4.04	10 years ago
26	* changes for bootcdbackup in file bootcdmk2diskconf.src to ... * changes for bootcdbackup in file bootcdmk2diskconf.src to read Input Partitions (Variable RIPARTITION) not only from /proc/partitions as before but also from sfdisk -s output. This was needed for RH 6.4 backup. * test data for new feature in bootcdmk2diskconf.tst7	Bernd Schumacher	4.03	10 years ago
25	in bootcdbackup: make sure backup data, which is already com... in bootcdbackup: make sure backup data, which is already compressed, will not be compressed again by mkzftree	Bernd Schumacher	4.02	10 years ago
24	* bootcdmk2diskconf now calculates EXT2FS, EXT3FS and EXT4FS... * bootcdmk2diskconf now calculates EXT2FS, EXT3FS and EXT4FS automatically * bootcd2disk now checks if rereading the partiton table works after partitioning and reboots if necessarry. * only support iso images with compression enabled, because without compression is not used and not tested. So no config variable COMPRESSION is needed any more * only support for iso images using ISOLINUX. So no config variable ISOLINUX and SYSLINUX_SAVE is needed any more. * no support for hppa, deleted some remains * no support for ia64 any more. it has not been tested for a to long time. So no config variable ELILO and ARCH is needed any more.	Bernd Schumacher	4.01	10 years ago
23	* add bootcd2disk config vars EXT3FS and EXT4FS * add bootcd2disk config vars EXT3FS and EXT4FS * deleted config vars EXT3 and EXT4 * changed Standards-Verstion from 3.9.1 to 3.9.4 * Bootcd now uses the aufs, so there is no need for specifying ramdisk sizes any more. Closes: #173134 and Closes: #312023 * There is only one bootcd package which includes everything, no bootcd-i386, no bootcd-ia64, no bootcd-backup and no bootcd-mkinitramfs are needed any more Closes: #366578 .	Bernd Schumacher	4.00	11 years ago
22	Fixed bootcd2disk grub stage files. Fixed bootcd2disk grub stage files. Stage files used to install with bootcd2disk will not be changed in /boot after install.	Bernd Schumacher	3.29	11 years ago
21	Tested bootcd with tmpfs. Tested bootcd with tmpfs.	Bernd Schumacher	3.28	12 years ago
20	* Tested bootcdbackupwizard/bootcd2disk with rh6.1 and wheez... * Tested bootcdbackupwizard/bootcd2disk with rh6.1 and wheezy * Tested bootcdwrite/bootcd2disk with wheezy	Bernd Schumacher	3.27	12 years ago
19	* changed alioth repository from cvs to svn * changed alioth repository from cvs to svn * bootcdwrite now mounts cdimage.iso with option "-o ro" to avoid a warning, that cdimage.iso is mounted read only. * I could not reproduce the "image kernel panics" bug. But with adding "-o ro" to the mount command in bootcdproberoot, the fix proposed by Igor Chubin <igor@chub.in> has been applied. Closes: #382293 * automatically add a 2 MB post-MBR gap for grub-2 if SFDISK0=auto is configured * support /run and do not copy /run/* on bootcd * verified that /dev/.udev code in bootcd does not harm on systems with /run. The code listed in the bugreport only makes sure that bootcd does not copy /dev/.udev if it exists. Closes: #644309 * changed Standards-Verstion from to 3.9.1 * deleted dependency "bootcd-i386:Depends bootcd" and "bootcd-ia64:Depends bootcd". Closes: #622690 * tested bootcdwrite and bootcd2disk with actual version of wheezy and squeeze. The bug "Error on /dev/loop/0 under amd64" reported by Alexander Sieck <alexander.sieck@web.de> and the bug "Kernel panic at boot /sbin/init" reported by el jefe delito <eljefedelito@gmail.com> could not be reproduced with version 3.26. Closes: #362231 and Closes: #539213	Bernd Schumacher	3.26	12 years ago
18	* fixed Bug in bootcdmk2diskconf which did create wrong boot... * fixed Bug in bootcdmk2diskconf which did create wrong bootcd2disk.conf if a VG consisted of more than one PV * fixed bashism in bootcd2disk * deleted hppa support	Bernd Schumacher	3.25	13 years ago
17	* bootcd-i386 now recommends bootcd-mkinitramfs, because it ... * bootcd-i386 now recommends bootcd-mkinitramfs, because it almost always needed * Added Configuration for LXDE, which depends on writing to ~/.cache since Debian Squeeze, in bootcdwrite.conf as suggested by Kushal Koolwal <kushalkoolwal@gmail.com>. Closes: #615903 * changed "function extra_changes()" to "extra_changes()" in comments of bootcdwrite.conf because of bashism * Make sure we do not copy /dev/.udev/	Bernd Schumacher	3.24	13 years ago
16	Fixed bug, in bootcdwrite where genisoimage did not use opti... Fixed bug, in bootcdwrite where genisoimage did not use option -graft-points, (although it should use it with versions of mkisofs>=1.13) because the version of genisoimage was not correct calculated by bootcdwrite. This results in the exact same bug "bootcd fails because of deleted path" as reported by "Hans-J. Ullrich" <hans.ullrich@loop.de>. But now we could reproduce it. Closes: #562560	Bernd Schumacher	3.23	13 years ago
15	* Fix a bug with bootcd2disk, found by Kevin Woldt <kevin.wo... * Fix a bug with bootcd2disk, found by Kevin Woldt <kevin.woldt@hp.com> that prevents copying anything under /mnt to the new installed system. * Fix a bug reported by Lucas Nussbaum <lucas@lucas-nussbaum.net> which produced an error when purging bootcd-mkinitramfs (after dependencies removal). Closes: #604220:	Bernd Schumacher	3.22	13 years ago
14	As Sherwood Wang <swang.work@gmail.com> found out bootcd did As Sherwood Wang <swang.work@gmail.com> found out bootcd did not run with newer kernels (2.6.32). To fix this information will about block devices will be taken from /sys instead of /proc. Closes: #588774	Bernd Schumacher	3.21	13 years ago
13	* Support Kernels with ramdisk as module (as used in squeeze... * Support Kernels with ramdisk as module (as used in squeeze). - S12bootcdram.sh loads ramdisk Module (brd) if it exists - S12bootcdram.sh may have to create /dev/ram2 manually - bootcd-check.lib now accepts kernels with CONFIG_BLK_DEV_RAM=[m\|y] * Support newer login that does not allow devices outside of /dev - bootcdwrite makes sure /etc/securetty has full path when running from bootcd - bootcd2disk restores original /etc/securetty * Bashism - do not use bash command declare any more * This is the first try to support Grub2. Maybe it is more sure to use Grub for now. * check that if bootcd-mkinitramfs is installed, it has modified the correct initrd. While installing bootcd-mkinitramfs it only modifies the actual running initrd, other initrds have to be modified manually. The check tells the command to execute. * Added sr_mod to the MANUAL_MODULES in bootcdmodprobe. Thanks to Kushal Koolwal <kushalkoolwal@hotmail.com> and Daniel Wozniak <dan@edgeos.com>. Successfuly tested squeeze kernel vmlinuz-2.6.32-3-686. Fixed bugs reported by Alessandro Polverini <alex@nibbles.it>. Also Tested bootcd2disk with this kernel. Closes: #474148 * Added startscripts bootcdram and bootcdflop with LSB support instead of old S12bootcdram.sh and S13bootcdflop.sh.	Bernd Schumacher	3.20	14 years ago
12	* Fix: in S12bootcdram.sh only create symlinks if target doe... * Fix: in S12bootcdram.sh only create symlinks if target does not exist * Fix: in bootcd2disk in function udev_fixnet return 0 if nothing hast to be fixed * Fix: bug in bootcdmk2diskconf which did not handle SWAP labels correct * Now grub makes sure the correct stage files are installed. * Support a lenny chroot to be used by bootcdbackupwizard. * Tested bootcdbackupwizard with installations of RHEL4-U4-i386-AS and rhel-server-5.4-i386	Bernd Schumacher	3.19	14 years ago
11	* Added Pre-Depends in bootcd-ia64, to have not the same fil... * Added Pre-Depends in bootcd-ia64, to have not the same file in both packages while upgrading. Hopefully this closes the bug found by Holger Levsen <holger@layer-acht.org>. Closes: #562855 * Added new GRUB Parameter GRUBDEVICEMAP for more flexibility in bootcd2disk.conf.	Bernd Schumacher	3.18	14 years ago
10	* support for md softraid * support for md softraid * each package now depends on bootcd >= 3.17. bootcd 3.17 does not include /usr/share/bootcd/bootcd-ia64.lib as bootcd 3.10+nmu1 did reported by Holger Levsen <holger@layer-acht.org>. Closes: #562855 * Solved bashism by changing == to = in test statements, reported by Andre Roth <lynx@netlabs.org>. Closes: #560204	Bernd Schumacher	3.17	14 years ago
9	* if we get "BLKRRPART: Device or resource busy" even withou... * if we get "BLKRRPART: Device or resource busy" even withou using LVM we have to destroy needed disks with dd before rebooting. * changed Standards-Verstion from 3.8.0 to 3.8.2 * fixed bashism reported by Raphael Geissert <atomo64@gmail.com>. Closes: #530059	Bernd Schumacher	3.16	14 years ago

Older »