1
/* gzlib.c -- zlib functions common to reading and writing gzip files
2
* Copyright (C) 2004, 2010, 2011, 2012, 2013 Mark Adler
3
* For conditions of distribution and use, see copyright notice in zlib.h
8
#if defined(_WIN32) && !defined(__BORLANDC__)
9
# define LSEEK _lseeki64
11
#if defined(_LARGEFILE64_SOURCE) && _LFS64_LARGEFILE-0
12
# define LSEEK lseek64
19
local void gz_reset OF((gz_statep));
20
local gzFile gz_open OF((const void *, int, const char *));
24
/* Map the Windows error number in ERROR to a locale-dependent error message
25
string and return a pointer to it. Typically, the values for ERROR come
28
The string pointed to shall not be modified by the application, but may be
29
overwritten by a subsequent call to gz_strwinerror
31
The gz_strwinerror function does not change the current setting of
33
char ZLIB_INTERNAL *gz_strwinerror (error)
36
static char buf[1024];
39
DWORD lasterr = GetLastError();
40
DWORD chars = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM
41
| FORMAT_MESSAGE_ALLOCATE_BUFFER,
44
0, /* Default language */
49
/* If there is an \r\n appended, zap it. */
51
&& msgbuf[chars - 2] == '\r' && msgbuf[chars - 1] == '\n') {
56
if (chars > sizeof (buf) - 1) {
57
chars = sizeof (buf) - 1;
61
wcstombs(buf, msgbuf, chars + 1);
65
sprintf(buf, "unknown win32 error (%ld)", error);
68
SetLastError(lasterr);
74
/* Reset gzip file state */
75
local void gz_reset(state)
78
state->x.have = 0; /* no output data available */
79
if (state->mode == GZ_READ) { /* for reading ... */
80
state->eof = 0; /* not at end of file */
81
state->past = 0; /* have not read past end yet */
82
state->how = LOOK; /* look for gzip header */
84
state->seek = 0; /* no seek request pending */
85
gz_error(state, Z_OK, NULL); /* clear error */
86
state->x.pos = 0; /* no uncompressed data yet */
87
state->strm.avail_in = 0; /* no input data yet */
90
/* Open a gzip file either by name or file descriptor. */
91
local gzFile gz_open(path, fd, mode)
110
/* allocate gzFile structure to return */
111
state = (gz_statep)malloc(sizeof(gz_state));
114
state->size = 0; /* no buffers allocated yet */
115
state->want = GZBUFSIZE; /* requested buffer size */
116
state->msg = NULL; /* no error message yet */
119
state->mode = GZ_NONE;
120
state->level = Z_DEFAULT_COMPRESSION;
121
state->strategy = Z_DEFAULT_STRATEGY;
124
if (*mode >= '0' && *mode <= '9')
125
state->level = *mode - '0';
129
state->mode = GZ_READ;
131
#ifndef NO_GZCOMPRESS
133
state->mode = GZ_WRITE;
136
state->mode = GZ_APPEND;
139
case '+': /* can't read and write at the same time */
142
case 'b': /* ignore -- will request binary anyway */
155
state->strategy = Z_FILTERED;
158
state->strategy = Z_HUFFMAN_ONLY;
161
state->strategy = Z_RLE;
164
state->strategy = Z_FIXED;
169
default: /* could consider as an error, but just ignore */
175
/* must provide an "r", "w", or "a" */
176
if (state->mode == GZ_NONE) {
181
/* can't force transparent read */
182
if (state->mode == GZ_READ) {
187
state->direct = 1; /* for empty file */
190
/* save the path name for error messages */
193
len = wcstombs(NULL, path, 0);
194
if (len == (size_t)-1)
199
len = strlen((const char *)path);
200
state->path = (char *)malloc(len + 1);
201
if (state->path == NULL) {
208
wcstombs(state->path, path, len + 1);
213
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
214
snprintf(state->path, len + 1, "%s", (const char *)path);
216
strcpy(state->path, path);
219
/* compute the flags for open() */
228
(cloexec ? O_CLOEXEC : 0) |
230
(state->mode == GZ_READ ?
232
(O_WRONLY | O_CREAT |
234
(exclusive ? O_EXCL : 0) |
236
(state->mode == GZ_WRITE ?
240
/* open the file with the appropriate flags (or just use fd) */
241
state->fd = fd > -1 ? fd : (
243
fd == -2 ? _wopen(path, oflag, 0666) :
245
open((const char *)path, oflag, 0666));
246
if (state->fd == -1) {
251
if (state->mode == GZ_APPEND)
252
state->mode = GZ_WRITE; /* simplify later checks */
254
/* save the current position for rewinding (only if reading) */
255
if (state->mode == GZ_READ) {
256
state->start = LSEEK(state->fd, 0, SEEK_CUR);
257
if (state->start == -1) state->start = 0;
260
/* initialize stream */
264
return (gzFile)state;
267
/* -- see zlib.h -- */
268
gzFile ZEXPORT gzopen(path, mode)
272
return gz_open(path, -1, mode);
275
/* -- see zlib.h -- */
276
gzFile ZEXPORT gzopen64(path, mode)
280
return gz_open(path, -1, mode);
283
/* -- see zlib.h -- */
284
gzFile ZEXPORT gzdopen(fd, mode)
288
char *path; /* identifier for error messages */
291
if (fd == -1 || (path = (char *)malloc(7 + 3 * sizeof(int))) == NULL)
293
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
294
snprintf(path, 7 + 3 * sizeof(int), "<fd:%d>", fd); /* for debugging */
296
sprintf(path, "<fd:%d>", fd); /* for debugging */
298
gz = gz_open(path, fd, mode);
303
/* -- see zlib.h -- */
305
gzFile ZEXPORT gzopen_w(path, mode)
309
return gz_open(path, -2, mode);
313
/* -- see zlib.h -- */
314
int ZEXPORT gzbuffer(file, size)
320
/* get internal structure and check integrity */
323
state = (gz_statep)file;
324
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
327
/* make sure we haven't already allocated memory */
328
if (state->size != 0)
331
/* check and set requested size */
333
size = 2; /* need two bytes to check magic header */
338
/* -- see zlib.h -- */
339
int ZEXPORT gzrewind(file)
344
/* get internal structure */
347
state = (gz_statep)file;
349
/* check that we're reading and that there's no error */
350
if (state->mode != GZ_READ ||
351
(state->err != Z_OK && state->err != Z_BUF_ERROR))
354
/* back up and start over */
355
if (LSEEK(state->fd, state->start, SEEK_SET) == -1)
361
/* -- see zlib.h -- */
362
z_off64_t ZEXPORT gzseek64(file, offset, whence)
371
/* get internal structure and check integrity */
374
state = (gz_statep)file;
375
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
378
/* check that there's no error */
379
if (state->err != Z_OK && state->err != Z_BUF_ERROR)
382
/* can only seek from start or relative to current position */
383
if (whence != SEEK_SET && whence != SEEK_CUR)
386
/* normalize offset to a SEEK_CUR specification */
387
if (whence == SEEK_SET)
388
offset -= state->x.pos;
389
else if (state->seek)
390
offset += state->skip;
393
/* if within raw area while reading, just go there */
394
if (state->mode == GZ_READ && state->how == COPY &&
395
state->x.pos + offset >= 0) {
396
ret = LSEEK(state->fd, offset - state->x.have, SEEK_CUR);
403
gz_error(state, Z_OK, NULL);
404
state->strm.avail_in = 0;
405
state->x.pos += offset;
409
/* calculate skip amount, rewinding if needed for back seek when reading */
411
if (state->mode != GZ_READ) /* writing -- can't go backwards */
413
offset += state->x.pos;
414
if (offset < 0) /* before start of file! */
416
if (gzrewind(file) == -1) /* rewind, then skip to offset */
420
/* if reading, skip what's in output buffer (one less gzgetc() check) */
421
if (state->mode == GZ_READ) {
422
n = GT_OFF(state->x.have) || (z_off64_t)state->x.have > offset ?
423
(unsigned)offset : state->x.have;
430
/* request skip (if not zero) */
433
state->skip = offset;
435
return state->x.pos + offset;
438
/* -- see zlib.h -- */
439
z_off_t ZEXPORT gzseek(file, offset, whence)
446
ret = gzseek64(file, (z_off64_t)offset, whence);
447
return ret == (z_off_t)ret ? (z_off_t)ret : -1;
450
/* -- see zlib.h -- */
451
z_off64_t ZEXPORT gztell64(file)
456
/* get internal structure and check integrity */
459
state = (gz_statep)file;
460
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
463
/* return position */
464
return state->x.pos + (state->seek ? state->skip : 0);
467
/* -- see zlib.h -- */
468
z_off_t ZEXPORT gztell(file)
473
ret = gztell64(file);
474
return ret == (z_off_t)ret ? (z_off_t)ret : -1;
477
/* -- see zlib.h -- */
478
z_off64_t ZEXPORT gzoffset64(file)
484
/* get internal structure and check integrity */
487
state = (gz_statep)file;
488
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
491
/* compute and return effective offset in file */
492
offset = LSEEK(state->fd, 0, SEEK_CUR);
495
if (state->mode == GZ_READ) /* reading */
496
offset -= state->strm.avail_in; /* don't count buffered input */
500
/* -- see zlib.h -- */
501
z_off_t ZEXPORT gzoffset(file)
506
ret = gzoffset64(file);
507
return ret == (z_off_t)ret ? (z_off_t)ret : -1;
510
/* -- see zlib.h -- */
511
int ZEXPORT gzeof(file)
516
/* get internal structure and check integrity */
519
state = (gz_statep)file;
520
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
523
/* return end-of-file state */
524
return state->mode == GZ_READ ? state->past : 0;
527
/* -- see zlib.h -- */
528
const char * ZEXPORT gzerror(file, errnum)
534
/* get internal structure and check integrity */
537
state = (gz_statep)file;
538
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
541
/* return error information */
543
*errnum = state->err;
544
return state->err == Z_MEM_ERROR ? "out of memory" :
545
(state->msg == NULL ? "" : state->msg);
548
/* -- see zlib.h -- */
549
void ZEXPORT gzclearerr(file)
554
/* get internal structure and check integrity */
557
state = (gz_statep)file;
558
if (state->mode != GZ_READ && state->mode != GZ_WRITE)
561
/* clear error and end-of-file */
562
if (state->mode == GZ_READ) {
566
gz_error(state, Z_OK, NULL);
569
/* Create an error message in allocated memory and set state->err and
570
state->msg accordingly. Free any previous error message already there. Do
571
not try to free or allocate space if the error is Z_MEM_ERROR (out of
572
memory). Simply save the error message as a static string. If there is an
573
allocation failure constructing the error message, then convert the error to
575
void ZLIB_INTERNAL gz_error(state, err, msg)
580
/* free previously allocated message and clear */
581
if (state->msg != NULL) {
582
if (state->err != Z_MEM_ERROR)
587
/* if fatal, set state->x.have to 0 so that the gzgetc() macro fails */
588
if (err != Z_OK && err != Z_BUF_ERROR)
591
/* set error code, and if no message, then done */
596
/* for an out of memory error, return literal string when requested */
597
if (err == Z_MEM_ERROR)
600
/* construct error message with path */
601
if ((state->msg = (char *)malloc(strlen(state->path) + strlen(msg) + 3)) ==
603
state->err = Z_MEM_ERROR;
606
#if !defined(NO_snprintf) && !defined(NO_vsnprintf)
607
snprintf(state->msg, strlen(state->path) + strlen(msg) + 3,
608
"%s%s%s", state->path, ": ", msg);
610
strcpy(state->msg, state->path);
611
strcat(state->msg, ": ");
612
strcat(state->msg, msg);
618
/* portably return maximum value for an int (when limits.h presumed not
619
available) -- we need to do this to cover cases where 2's complement not
620
used, since C standard permits 1's complement and sign-bit representations,
621
otherwise we could just use ((unsigned)-1) >> 1 */
622
unsigned ZLIB_INTERNAL gz_intmax()